Eliminating transmissibility of bovine spongiform encephalopathy by dry-heat treatment

Photocatalytic Inactivation of Viruses and Prions: Multilevel Approach with Other Disinfectants

Ag, Cu, Zn, Ti, and Au nanoparticles show enhanced photocatalytic properties. Efficient indoor disinfection strategies are imperative to manage the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic. Virucidal agents, such as ethanol, sodium hypochlorite, 222-nm UV light, and electrolyzed water inactivate SARS-CoV-2 in indoor environments. Tungsten trioxide (WO3) photocatalyst and visible light disinfect abiotic surfaces against SARS-CoV-2. The titanium dioxide (TiO2)/UV system inactivates SARS-CoV-2 in aerosols and on deliberately contaminated TiO2-coated glass slide surfaces in photocatalytic chambers, wherein 405-nm UV light treatment for 20 min sterilizes the environment and generates reactive oxygen species (ROS) that inactivate the virus by targeting S and envelope proteins and viral RNA. Mesoscopic calcium bicarbonate solution (CAC-717) inactivates pathogens, such as prions, influenza virus, SARS-CoV-2, and noroviruses, in fluids; it presumably acts similarly on human and animal skin. The molecular complexity of cementitious materials promotes the photocatalysis of microorganisms. In combination, the two methods can reduce the pathogen load in the environment. As photocatalysts and CAC-717 are potent disinfectants for prions, disinfectants against prionoids could be developed by combining photocatalysis, gas plasma methodology, and CAC-717 treatment, especially for surgical devices and instruments.

Heat inactivation of stable proteinaceous particles for future sample return mission architecture

The National Aeronautics and Space Administration (NASA) and the European Space Agency (ESA) are studying how to improve the safety of future planetary science sample return missions that would bring back materials to Earth. Backward planetary protection requirements have been identified as a critical technology development focus in order to reduce the possibility of harm to Earth’s biosphere from such returned materials. In order to meet these challenges, NASA has identified the need for an appropriate suite of biological indicators (BIs) that would be used to develop, test, and ultimately validate sample return mission sterilization systems. Traditionally, BIs are defined as test systems composed of viable microorganisms that are inactivated when necessary conditions are met during sterilization procedures, providing a level of confidence in the process. BIs used traditionally at NASA have been driven by past mission requirements, mainly focused on spore-formers. However, spore-based BIs are insufficient as the only analog for a nominal case in sample return missions. NASA has directed sample return missions from habitable worlds to manage “potential extraterrestrial life and bioactive molecules” which requires investigation of a range of potential BIs. Thus, it is important to develop a mitigation strategy that addresses various known forms of biology, from complex organisms to biomolecular assemblies (including self-perpetuating non-nucleic acid containing structures). The current effort seeks to establish a BI that would address a stable biomolecule capable of replication. Additional engineering areas that may benefit from this information include applications of brazing, sealing, and impact heating, and atmospheric entry heating. Yeast aggregating proteins exhibit aggregation behavior similar to mammalian prion protein and have been successfully employed by researchers to understand fundamental prion properties such as aggregation and self-propagation. Despite also being termed “prions,” yeast proteins are not hazardous to humans and can be used as a cost effective and safer alternative to mammalian prions. We have shown that inactivation by dry heat is feasible for the prion formed by the yeast Sup35NM protein, although at higher temperature than for bacterial spores.

Calcium bicarbonate as an antimicrobial, antiviral, and prion‑inhibiting agent (Review)

Calcium bicarbonate does not act as a disinfectant at neutral pH; however, it exerts strong antimicrobial activity after it is placed in a high-voltage electric field, whereby it assumes an alkaline pH (12.4). Moreover, the microbicidal activity of the resulting solution (named CAC-717) is not influenced by the presence of organic material or resistance of the agent to inactivation. When sprayed on the skin surface, the pH of CAC-717 decreases rapidly to 8.84. CAC-717 comprises fine particles of 50-500 nm. When these mesoscopic crystals are dissolved in water, they destroy the genomes of bacteria or viruses and neutralize the infectious properties of abnormal prion proteins produced in ScN2a cells. The severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2) pandemic has resulted in unprecedented international demand for disinfectants. A small titer of SARS-CoV-2 remains infectious even after 30 sec in growth medium at pH 12.4. CAC-717 has exhibited a strong virucidal effect (3.6 to 4.4 log₁₀ decrease) against all examined SARS-CoV-2 isolates, including mutant forms. Similarly, human noroviruses also remain intact at pH 12.4; however, CAC-717 has been shown to cause a 3.25 log₁₀ reduction in norovirus genomic RNA compared to untreated samples. Existing evidence suggests that an unidentified mechanism controls the virucidal activity of CAC-717.

The risk of Creutzfeldt-Jakob disease infection in cadaveric surgical training

The usefulness of cadaver surgical training in the clinical field is already well known. In Japan, the number of universities introducing cadaver surgical training is increasing. In addition to formalin fixation, various fixation methods are used, such as the Thiel method, saturated salt solution method, N-vinyl-2-pyrrolidone method, and fresh-frozen cadavers. Although protection against infections during fixation and cadaver surgical training has been implemented in most universities, it is currently inadequate. Furthermore, the possibility of undiagnosed infectious diseases in donors cannot be excluded. Prion diseases, such as Creutzfeldt-Jakob disease, are relatively rare, but they are fatal, with no effective treatment. The abnormal prion protein that causes prion diseases is resistant to formaldehyde and cannot be inactivated by all methods of cadaver fixation presently in use. Recently developed real-time quaking-induced conversion has been reported to be a useful screening method for prion infection. In addition, this article aims to raise awareness of prion diseases in cadaver surgical training by reviewing the current understanding of prion diseases in cadavers and their screening methods.

Stability of BSE infectivity towards heat treatment even after proteolytic removal of prion protein

The unconventional infectious agents of transmissible spongiform encephalopathies (TSEs) are prions. Their infectivity co-appears with PrPSc, aberrant depositions of the host's cellular prion protein (PrPC). Successive heat treatment in the presence of detergent and proteolysis by a keratinase from Bacillus licheniformis PWD-1 was shown before to destroy PrPSc from bovine TSE (BSE) and sheep scrapie diseased brain, however data regarding expected reduction of infectivity were still lacking. Therefore, transgenic Tgbov XV mice which are highly BSE susceptible were used to quantify infectivity before and after the bovine brain treatment procedure. Also four immunochemical analyses were applied to compare the levels of PrPSc. After heating at 115 °C with or without subsequent proteolysis, the original BSE infectivity of 106.2-6.4 ID50 g-1 was reduced to a remaining infectivity of 104.6-5.7 ID50 g-1 while strain characteristics were unaltered, even after precipitation with methanol. Surprisingly, PrPSc depletion was 5-800 times higher than the loss of infectivity. Similar treatment was applied on other prion strains, which were CWD1 in bank voles, 263 K scrapie in hamsters and sheep PG127 scrapie in tg338 ovinized mice. In these strains however, infectivity was already destroyed by heat only. These findings show the unusual heat resistance of BSE and support a role for an additional factor in prion formation as suggested elsewhere when producing prions from PrPC. Leftover material in the remaining PrPSc depleted BSE preparation offers a unique substrate for searching additional elements for prion infectivity and improving our concept about the nature of prions.

The integrity of chemically treated plasmid DNA as a chemical-based choice for prion clearance

In regenerative medical products for clinical applications, a major concern is the risk of ruminant-derived materials developing transmissible spongiform encephalopathy (TSE) in the manufacturing process. Because of the risk of TSE causing prion disease, the raw materials derived from ruminants should be compliant with the “Standard for Biological Raw Materials” to ensure the quality and safety of pharmaceutical products. We therefore tested whether plasmid DNA could withstand four chemical reagents (Gdn-HCl, Gdn-SCN, TCA, or SDS), having referred to the report by Tateishi et al. [1], which describes how Creutzfeldt–Jakob disease pathogens can be inactivated by chemical reagents capable of producing a 7-log reduction in prion inactivation. We observed that plasmid DNA was mixed with chemical reagents and that the functionality of plasmid DNA was equivalent for both chemical and non-chemical treatment. The potency of plasmid DNA was monitored by the existence of DNA fragments and the function by which GFP proteins were produced by HEK293-cell transfected plasmid DNA. The existence of DNA fragments was detected in plasmid DNA treated by chemical reagents, except when undergoing TCA treatment. Additionally, when HEK293 cells were transfected with the plasmid DNA after chemical treatment, GFP protein was produced. These results indicate that plasmid DNA can withstand the chemical treatments for blocking prion transmission.

•

Inactivation methods need to be carefully chosen based on the raw materials.

•

Plasmid DNA withstood chemical treatment, undergoing Gdn-HCl, Gdn-SCN, and SDS for prion inactivation.

•

The integrity of chemically treated plasmid DNA is not compromised as a result of the treatment.

Inactivation of Scrapie Prions by the Electrically Charged Disinfectant CAC-717

Previous studies have revealed that the electrically charged disinfectant CAC-717 has strong virucidal and bactericidal effects but is safe for humans and animals. In this study, CAC-717 was further evaluated for its potential effects as a disinfectant against scrapie prions. Western blotting showed that CAC-717 reduced the amount of the abnormal isoform of prion protein (PrP^Sc) in prion-infected cell (ScN2a) lysates. Furthermore, the reduction of prion transmissibility was confirmed by a mouse bioassay, in which mice injected with scrapie prions pre-treated with CAC-717 survived longer than those injected with untreated scrapie prions. Lastly, to evaluate the seeding activity of ScN2a cell lysates treated with CAC-717, quantitative protein misfolding cyclic amplification (PMCA) was performed directly on ScN2a cell lysates treated with CAC-717, which showed that the median dose of PMCA (PMCA₅₀) dropped from log9.95 to log5.20 after CAC-717 treatment, indicating more than a 4 log reduction. This suggests that the seeding activity of PrP^Sc is decreased by CAC-717. Collectively, these results suggest that CAC-717 has anti-prion activity, reducing both PrP^Sc conversion activity and prion transmissibility; thus, CAC-717 will be useful as a novel disinfectant in prion diseases.