X-ray diffraction from Si/Ge layers: Diffuse scattering in the region of total external reflection

(Sub-)Picosecond Surface Correlations of Femtosecond Laser Excited Al-Coated Multilayers Observed by Grazing-Incidence X-ray Scattering

Femtosecond high-intensity laser pulses at intensities surpassing 1014 W/cm2 can generate a diverse range of functional surface nanostructures. Achieving precise control over the production of these functional structures necessitates a thorough understanding of the surface morphology dynamics with nanometer-scale spatial resolution and picosecond-scale temporal resolution. In this study, we show that single XFEL pulses can elucidate structural changes on surfaces induced by laser-generated plasmas using grazing-incidence small-angle X-ray scattering (GISAXS). Using aluminium-coated multilayer samples we distinguish between sub-picosecond (ps) surface morphology dynamics and subsequent multi-ps subsurface density dynamics with nanometer-depth sensitivity. The observed subsurface density dynamics serve to validate advanced simulation models representing matter under extreme conditions. Our findings promise to open new avenues for laser material-nanoprocessing and high-energy-density science.

Strategy to simulate and fit 2D grazing-incidence small-angle X-ray scattering patterns of nanostructured thin films

Grazing-incidence small-angle X-ray scattering (GISAXS) is a widely used method for the characterization of the nanostructure of supported thin films and enables time-resolved in situ measurements. The 2D scattering patterns contain detailed information about the nanostructures within the film and at its surface. However, this information is distorted not only by the reflection of the X-ray beam at the substrate-film interface and its refraction at the film surface but also by scattering of the substrate, the sample holder and other types of parasitic background scattering. In this work, a new, efficient strategy to simulate and fit 2D GISAXS patterns that explicitly includes these effects is introduced and demonstrated for (i) a model case nanostructured thin film on a substrate and (ii) experimental data from a microphase-separated block copolymer thin film. To make the protocol efficient, characteristic linecuts through the 2D GISAXS patterns, where the different contributions dominate, are analysed. The contributions of the substrate and the parasitic background scattering - which ideally are measured separately - are determined first and are used in the analysis of the 2D GISAXS patterns of the nanostructured, supported film. The nanostructures at the film surface and within the film are added step by step to the real-space model of the simulation, and their structural parameters are determined by minimizing the difference between simulated and experimental scattering patterns in the selected linecuts. Although in the present work the strategy is adapted for and tested with BornAgain, it can be easily used with other types of simulation software. The strategy is also applicable to grazing-incidence small-angle neutron scattering.

Interface morphology driven exchange interaction and magnetization reversal in a Gd/Co multilayer

Rare-earth (RE)/transition metal (TM) ferromagnetic heterostructures with competing interfacial coupling and Zeeman energy provide a rich ground to study different phase states as a function of magnetic field and temperature. The interface morphology as a knob in these RE/TM heterostructures provides an excellent opportunity to engineer the macroscopic magnetic response by tuning the interface dependent microscopic interactions between the layers. We have investigated the interface morphology driven structure and magnetic properties of a Gd/Co multilayer. The interface morphology of the multilayer was controlled by annealing the multilayer at a relatively low temperature of 573 K under vacuum conditions. Combining the different experimental techniques and a simple one-dimensional spin-based model calculation, we studied the detailed magnetic structure and magnetization reversal mechanism in this system across compensation temperature (T_comp), which suggested a strong interface dependent coupling in the system. We showed that changes in the interface morphology of the Gd/Co multilayer strongly influence the macroscopic magnetic properties of the system. The calculation also confirms the formation of a helical magnetic structure with a 2π domain wall in this system below T_comp. The experimental finding and the simulation of this technologically important system will help to understand the physics of all-optical switching and related applications.

BornAgain: software for simulating and fitting grazing-incidence small-angle scattering

BornAgain is a free and open-source multi-platform software framework for simulating and fitting X-ray and neutron reflectometry, off-specular scattering, and grazing-incidence small-angle scattering (GISAS). This paper concentrates on GISAS. Support for reflectometry and off-specular scattering has been added more recently, is still under intense development and will be described in a later publication. BornAgain supports neutron polarization and magnetic scattering. Users can define sample and instrument models through Python scripting. A large subset of the functionality is also available through a graphical user interface. This paper describes the software in terms of the realized non-functional and functional requirements. The web site https://www.bornagainproject.org/ provides further documentation.

Composition dependence of charge and magnetic length scales in mixed valence manganite thin films

Mixed-valence manganese oxides present striking properties like the colossal magnetoresistance, metal-insulator transition (MIT) that may result from coexistence of ferromagnetic, metallic and insulating phases. Percolation of such phase coexistence in the vicinity of MIT leads to first-order transition in these manganites. However the length scales over which the electronic and magnetic phases are separated across MIT which appears compelling for bulk systems has been elusive in (La_1−yPr_y)_1−xCa_xMnO₃ films. Here we show the in-plane length scale over which charge and magnetism are correlated in (La_0.4Pr_0.6)_1−xCa_xMnO₃ films with x = 0.33 and 0.375, across the MIT temperature. We combine electrical transport (resistance) measurements, x-ray absorption spectroscopy (XAS), x-ray magnetic circular dichroism (XMCD), and specular/off-specular x-ray resonant magnetic scattering (XRMS) measurements as a function of temperature to elucidate relationships between electronic, magnetic and morphological structure of the thin films. Using off-specular XRMS we obtained the charge-charge and charge-magnetic correlation length of these LPCMO films across the MIT. We observed different charge-magnetic correlation length for two films which increases below the MIT. The different correlation length shown by two films may be responsible for different macroscopic (transport and magnetic) properties.

Antiferromagnetic coupling between surface and bulk magnetization and anomalous magnetic transport in electro-deposited cobalt film

Correlation of morphology and structure and magnetization depth profiles of Co films grown by two different techniques, e.g. electrodeposition (S1) and sputtering (S2).

Measurement of molecular mixing at a conjugated polymer interface by specular and off-specular neutron scattering

Measurements have been performed on thermally equilibrated conjugated-polymer/insulating-polymer bilayers, using specular and off-specular neutron reflectivity. While specular reflectivity is only sensitive to the structure normal to the sample, off-specular measurements can probe the structure of the buried polymer/polymer interface in the plane of the sample. Systematic analysis of the scattering from a set of samples with varying insulating-polymer-thickness, using the distorted-wave Born approximation (DWBA), has allowed a robust determination of the intrinsic width at the buried polymer/polymer interface. The quantification of this width (12 Å ± 4 Å) allows us to examine aspects of the conjugated polymer conformation at the interface, by appealing to self-consistent field theory (SCFT) predictions for equilibrium polymer/polymer interfaces in the cases of flexible and semi-flexible chains. This analysis enables us to infer that mixing at this particular interface cannot be described in terms of polymer chain segments that adopt conformations similar to a random walk. Instead, a more plausible explanation is that the conjugated polymer chain segments become significantly oriented in the plane of the interface. It is important to point out that we are only able to reach this conclusion following the extensive analysis of reflectivity data, followed by comparison with SCFT predictions. It is not simply the case that conjugated polymers would be expected to adopt this kind of oriented conformation at the interface, because of their relatively high chain stiffness. It is the combination of a high stiffness and a relatively narrow intrinsic interfacial width that results in a deviation from flexible chain behaviour.

A grazing incidence small-angle x-ray scattering analysis on capped Ge nanodots in layer structures

The grazing incidence small-angle x-ray scattering (GISAXS) intensity from buried Ge nanodots is examined both by GISAXS/reflectivity measurements and by simulations with distorted wave Born approximation (DWBA). The validity and the condition of using the Born approximation (BA) are discussed using simulations based on the layer structures modeled from a reflectivity analysis. As expected in the previous kinematic analysis, use of the BA is reasonable in determining the size and the shape of very small or thin nanodots. Several effects of layer structures on the GISAXS analysis are discussed.

Separation and correlation of structural and magnetic roughness in a Ni thin film by polarized off-specular neutron reflectometry

Diffuse (off-specular) neutron and x-ray reflectometry has been used extensively for the determination of interface morphology in solids and liquids. For neutrons, a novel possibility is off-specular reflectometry with polarized neutrons to determine the morphology of a magnetic interface. There have been few such attempts due to the lower brilliance of neutron sources, though magnetic interaction of neutrons with atomic magnetic moments is much easier to comprehend and easily tractable theoretically. We have obtained a simple and physically meaningful expression, under the Born approximation, for analyzing polarized diffuse (off-specular) neutron reflectivity (PDNR) data. For the first time PDNR data from a Ni film have been analyzed and separate chemical and magnetic morphologies have been quantified. Also specular polarized neutron reflectivity measurements have been carried out to measure the magnetic moment density profile of the Ni film. The fit to PDNR data results in a longer correlation length for in-plane magnetic roughness than for chemical (structural) roughness. The magnetic interface is smoother than the chemical interface.

Characterisation of pore structures in nanoporous materials for advanced bionanotechnology

Porous materials are potential candidates for applications in various fields, such as bionanotechnology, gas separation, catalysts and micro-electronics. In particular, their applications in bionanotechnology include biosensors, biomedical implants and microdevices, biosupporters, bio-encapsules, biomolecule separations and biomedical therapy. All these bionanotechnology applications utilise the shape, size and size distribution of pores in porous materials. Therefore the controlled creation of pores with desired shape, size and size distribution is most important in the development of nanoporous materials. Accordingly, the accurate evaluation of pore structure is necessary in the development of nanoporous materials and their applications. This article reviews recent developments in analytical techniques to characterise the pore structures of nanoporous materials.

Capillary wave fluctuations and intrinsic widths of coupled fluid-fluid interfaces: an x-ray scattering study of a wetting film on bulk liquid

An x-ray specular reflectivity (XR) and off-specular diffuse scattering (XDS) study of the coupled thermal capillary fluctuations and the intrinsic profiles of two interacting fluid-fluid interfaces is presented. The measurements are carried out on complete wetting films of perfluoromethylcyclohexane (PFMC) on the surface of bulk liquid eicosane (C20), as a function of film thickness 30<D<160 A. In order to facilitate the analysis and interpretation of the data with minimal complexity, approximate methods for calculating scattering intensities are developed to take into account the subtleties of thermal diffuse scattering from layered liquid surfaces. With these methods, the calculations of XR/XDS intensities are reduced to a single numerical integration of simple functions in real space. In addition, an analytic expression is derived for small-angle XR that contains Debye-Waller-like factors with effective capillary roughness and takes into account the partial correlations of the two interfaces. The expression for the XR is quantitatively accurate so long as the reflection angle is small enough that the scattering from interfaces is distinguishable from bulk scattering. The results of the XR and XDS data analysis indicate that the capillary fluctuations at the two interfaces of the wetting films are partially correlated and their coupling is consistent with the van der Waals interactions. The relatively large intrinsic width (4 approximately 6A) of the liquid-liquid interface observed for thicker films (D greater than or similar to 50 A) is comparable to the value expected for the bulk liquid-liquid interface (D-->infinity), determined by either the radius of gyration (5.3 A) or the bulk correlation length (4.8 A) of the alkane C20. The intrinsic liquid-vapor interfacial width is sharper (approximately 2 A) and remains essentially constant over the entire probed range of D .

Measurement of roughness and diffuseness of interfaces

We propose a simple formalism which allows the separation of the contributions, due to roughness and chemical interdiffusion, to the total width of an interface by using two-dimensional information from either images or chemical maps. A definition is also proposed for the roughness of an interface in terms of iso-concentration surfaces. The formalism is based on the relation between projection in real space and the corresponding section in Fourier space, the main hypotheses being that the interface roughness is isotropic and that the composition profile is constant along the interface. The method, although general, will be illustrated with results on Fresnel imaging of Cu-Co magnetic multilayers.

Vectorially oriented monolayers of the cytochrome c/cytochrome oxidase bimolecular complex

Vectorially oriented monolayers of yeast cytochrome c and its bimolecular complex with bovine heart cytochrome c oxidase have been formed by self-assembly from solution. Both quartz and Ge/Si multilayer substrates were chemical vapor deposited with an amine-terminated alkylsiloxane monolayer that was then reacted with a hetero-bifunctional cross-linking reagent, and the resulting maleimide endgroup surface then provided for covalent interactions with the naturally occurring single surface cysteine 102 of the yeast cytochrome c. The bimolecular complex was formed by further incubating these cytochrome c monolayers in detergent-solubilized cytochrome oxidase. The sequential formation of such monolayers and the vectorially oriented nature of the cytochrome oxidase was studied via meridional x-ray diffraction, which directly provided electron density profiles of the protein(s) along the axis normal to the substrate plane. The nature of these profiles is consistent with previous work performed on vectorially oriented monolayers of either cytochrome c or cytochrome oxidase alone. Furthermore, optical spectroscopy has indicated that the rate of binding of cytochrome oxidase to the cytochrome c monolayer is an order of magnitude faster than the binding of cytochrome oxidase to an amine-terminated surface that was meant to mimic the ring of lysine residues around the heme edge of cytochrome c, which are known to be involved in the binding of this protein to cytochrome oxidase.