Structural changes in single membranes in response to an applied transmembrane electric potential revealed by time-resolved neutron/X-ray interferometry

The profile structure of a hybrid lipid bilayer, tethered to the surface of an inorganic substrate and fully hydrated with a bulk aqueous medium in an electrochemical cell, was investigated as a function of the applied transbilayer electric potential via time-resolved neutron reflectivity, enhanced by interferometry. Significant, and fully reversible structural changes were observed in the distal half (with respect to the substrate surface) of the hybrid bilayer comprised of a zwitterionic phospholipid in response to a +100mV potential with respect to 0mV. These arise presumably due to reorientation of the electric dipole present in the polar headgroup of the phospholipid and its resulting effect on the thickness of the phospholipid's hydrocarbon chain layer within the hybrid bilayer's profile structure. The profile structure of the voltage-sensor domain from a voltage-gated ion channel protein within a phospholipid bilayer membrane, tethered to the surface of an inorganic substrate and fully hydrated with a bulk aqueous medium in an electrochemical cell, was also investigated as a function of the applied transmembrane electric potential via time-resolved X-ray reflectivity, enhanced by interferometry. Significant, fully-reversible, and different structural changes in the protein were detected in response to ±100mV potentials with respect to 0mV. The approach employed is that typical of transient spectroscopy, shown here to be applicable to both neutron and X-ray reflectivity of thin films.

Structural characterization of the voltage-sensor domain and voltage-gated K+-channel proteins vectorially oriented within a single bilayer membrane at the solid/vapor and solid/liquid interfaces via neutron interferometry

The voltage-sensor domain (VSD) is a modular four-helix bundle component that confers voltage sensitivity to voltage-gated cation channels in biological membranes. Despite extensive biophysical studies and the recent availability of X-ray crystal structures for a few voltage-gated potassium (Kv) channels and a voltage-gate sodium (Nav) channel, a complete understanding of the cooperative mechanism of electromechanical coupling, interconverting the closed-to-open states (i.e., nonconducting to cation conducting) remains undetermined. Moreover, the function of these domains is highly dependent on the physical-chemical properties of the surrounding lipid membrane environment. The basis for this work was provided by a recent structural study of the VSD from a prokaryotic Kv-channel vectorially oriented within a single phospholipid (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)) membrane investigated by X-ray interferometry at the solid/moist He (or solid/vapor) and solid/liquid interfaces, thus achieving partial to full hydration, respectively (Gupta et al. Phys. Rev. E2011, 84, 031911-1-15). Here, we utilize neutron interferometry to characterize this system in substantially greater structural detail at the submolecular level, due to its inherent advantages arising from solvent contrast variation coupled with the deuteration of selected submolecular membrane components, especially important for the membrane at the solid/liquid interface. We demonstrate the unique vectorial orientation of the VSD and the retention of its molecular conformation manifest in the asymmetric profile structure of the protein within the profile structure of this single bilayer membrane system. We definitively characterize the asymmetric phospholipid bilayer solvating the lateral surfaces of the VSD protein within the membrane. The profile structures of both the VSD protein and phospholipid bilayer depend upon the hydration state of the membrane. We also determine the distribution of water and exchangeable hydrogen throughout the profile structure of both the VSD itself and the VSD:POPC membrane. These two experimentally determined water and exchangeable hydrogen distribution profiles are in good agreement with molecular dynamics simulations of the VSD protein vectorially oriented within a fully hydrated POPC bilayer membrane, supporting the existence of the VSD's water pore. This approach was extended to the full-length Kv-channel (KvAP) at a solid/liquid interface, providing the separate profile structures of the KvAP protein and the POPC bilayer within the reconstituted KvAP:POPC membrane.

Profile structures of the voltage-sensor domain and the voltage-gated K(+)-channel vectorially oriented in a single phospholipid bilayer membrane at the solid-vapor and solid-liquid interfaces determined by x-ray interferometry

One subunit of the prokaryotic voltage-gated potassium ion channel from Aeropyrum pernix (KvAP) is comprised of six transmembrane α helices, of which S1-S4 form the voltage-sensor domain (VSD) and S5 and S6 contribute to the pore domain (PD) of the functional homotetramer. However, the mechanism of electromechanical coupling interconverting the closed-to-open (i.e., nonconducting-to-K(+)-conducting) states remains undetermined. Here, we have vectorially oriented the detergent (OG)-solubilized VSD in single monolayers by two independent approaches, namely "directed-assembly" and "self-assembly," to achieve a high in-plane density. Both utilize Ni coordination chemistry to tether the protein to an alkylated inorganic surface via its C-terminal His_{6} tag. Subsequently, the detergent is replaced by phospholipid (POPC) via exchange, intended to reconstitute a phospholipid bilayer environment for the protein. X-ray interferometry, in which interference with a multilayer reference structure is used to both enhance and phase the specular x-ray reflectivity from the tethered single membrane, was used to determine directly the electron density profile structures of the VSD protein solvated by detergent versus phospholipid, and with either a moist He (moderate hydration) or bulk aqueous buffer (high hydration) environment to preserve a native structure conformation. Difference electron density profiles, with respect to the multilayer substrate itself, for the VSD-OG monolayer and VSD-POPC membranes at both the solid-vapor and solid-liquid interfaces, reveal the profile structures of the VSD protein dominating these profiles and further indicate a successful reconstitution of a lipid bilayer environment. The self-assembly approach was similarly extended to the intact full-length KvAP channel for comparison. The spatial extent and asymmetry in the profile structures of both proteins confirm their unidirectional vectorial orientation within the reconstituted membrane and indicate retention of the protein's folded three-dimensional tertiary structure upon completion of membrane bilayer reconstitution. Moreover, the resulting high in-plane density of vectorially oriented protein within a fully hydrated single phospholipid bilayer membrane at the solid-liquid interface will enable investigation of their conformational states as a function of the transmembrane electric potential.

Neutron diffraction studies on the location of water in lecithin bilayer model membranes

Lamellar neutron diffraction from oriented multilayers of hydrated dipalmitoyl lecithin was phased by isomorphous H(2)O-D(2)O exchange and swelling techniques. Bound water sites were located in the polar head group region of the bilayer profile. A 6-A resolution structure based on the neutron scattering density profile is proposed for the bilayer. It is consistent with the electron density profile from x-ray diffraction.

Molecular dynamics simulations of a hydrated protein vectorially oriented on polar and nonpolar soft surfaces

We present a collection of molecular dynamics computer simulation studies on a model protein-membrane system, namely a cytochrome c monolayer attached to an organic self-assembled monolayer (SAM). Modifications of the system are explored, including the polarity of the SAM endgroups, the amount of water present for hydration, and the coordination number of the heme iron atom. Various structural parameters are measured, e.g., the protein radius of gyration and eccentricity, the deviation of the protein backbone from the x-ray crystal structure, the orientation of the protein relative to the SAM surface, and the profile structures of the SAM, protein, and water. The polar SAM appears to interact more strongly with the protein than does the nonpolar SAM. Increased hydration of the system tends to reduce the effects of other parameters. The choice of iron coordination model has a significant effect on the protein structure and the heme orientation. The overall protein structure is largely conserved, except at each end of the sequence and in one loop region. The SAM structure is only perturbed in the region of its direct contact with the protein. Our calculations are in reasonably good agreement with experimental measurements (polarized optical absorption/emission spectroscopy, x-ray interferometry, and neutron interferometry).

Hydration state of single cytochrome c monolayers on soft interfaces via neutron interferometry

Yeast cytochrome c (YCC) can be covalently tethered to, and thereby vectorially oriented on, the soft surface of a mixed endgroup (e.g., -CH3/-SH = 6:1, or -OH/-SH = 6:1) organic self-assembled monolayer (SAM) chemisorbed on the surface of a silicon substrate utilizing a disulfide linkage between its unique surface cysteine residue and a thiol endgroup. Neutron reflectivities from such monolayers of YCC on Fe/Si or Fe/Au/Si multilayer substrates with H2O versus D2O hydrating the protein monolayer at 88% relative humidity for the nonpolar SAM (-CH3/-SH = 6:1 mixed endgroups) surface and 81% for the uncharged-polar SAM (-OH/-SH = 6:1mixed endgroups) surface were collected on the NG1 reflectometer at NIST. These data were analyzed using a new interferometric phasing method employing the neutron scattering contrast between the Si and Fe layers in a single reference multilayer structure and a constrained refinement approach utilizing the finite extent of the gradient of the profile structures for the systems. This provided the water distribution profiles for the two tethered protein monolayers consistent with their electron density profile determined previously via x-ray interferometry (Chupa et al., 1994).

Structural studies of the HIV-1 accessory protein Vpu in langmuir monolayers: synchrotron X-ray reflectivity

Vpu is an 81 amino acid integral membrane protein encoded by the HIV-1 genome with a N-terminal hydrophobic domain and a C-terminal hydrophilic domain. It enhances the release of virus from the infected cell and triggers degradation of the virus receptor CD4. Langmuir monolayers of mixtures of Vpu and the phospholipid 1,2-dilignoceroyl-sn-glycero-3-phosphocholine (DLgPC) at the water-air interface were studied by synchrotron radiation-based x-ray reflectivity over a range of mole ratios at constant surface pressure and for several surface pressures at a maximal mole ratio of Vpu/DLgPC. Analysis of the x-ray reflectivity data by both slab model-refinement and model-independent box-refinement methods firmly establish the monolayer electron density profiles. The electron density profiles as a function of increasing Vpu/DLgPC mole ratio at a constant, relatively high surface pressure indicated that the amphipathic helices of the cytoplasmic domain lie on the surface of the phospholipid headgroups and the hydrophobic transmembrane helix is oriented approximately normal to the plane of monolayer within the phospholipid hydrocarbon chain layer. At maximal Vpu/DLgPC mole ratio, the tilt of the transmembrane helix with respect to the monolayer normal decreases with increasing surface pressure and the conformation of the cytoplasmic domain varies substantially with surface pressure.

Heme structure and orientation in single monolayers of cytochrome c on polar and nonpolar soft surfaces

Polarized x-ray absorption fine structure (XAFS) spectroscopy has been performed in fluorescence mode under total external reflection conditions on frozen hydrated single monolayers of yeast cytochrome c (YCC). The protein molecules were vectorially oriented within the monolayer by tethering their naturally occurring and unique surface cysteine residues to the sulfhydryl-endgroups at the surface of a mixed organic self-assembled monolayer, itself covalently attached to an ultrapure silicon wafer. The sulfhydryl-endgroups were isolated by dilution with either methyl- or hydroxyl-endgroups, producing macroscopically nonpolar or uncharged-polar soft surfaces, respectively. Independent information on the heme-plane orientation relative to the monolayer plane was obtained experimentally via optical linear dichroism. The polarized XAFS data have been analyzed both qualitatively and by a global mapping approach limited to systematically altering the various iron-ligand distances within a model for the local atomic environment of the heme prosthetic group, and comparing the theoretically generated XAFS spectra with those obtained experimentally. A similar analysis of unpolarized XAFS data from a frozen solution of YCC was performed using either the heme environment from the NMR solution or the x-ray crystallographic data for YCC as the model structure. All resulting iron-ligand distances were then used in molecular dynamics (MD) computer simulations of YCC in these three systems to investigate the possible effects of anisotropic ligand motions on the fits of the calculated to the experimental XAFS spectra.

Vectorially oriented monolayers of the cytochrome c/cytochrome oxidase bimolecular complex

Vectorially oriented monolayers of yeast cytochrome c and its bimolecular complex with bovine heart cytochrome c oxidase have been formed by self-assembly from solution. Both quartz and Ge/Si multilayer substrates were chemical vapor deposited with an amine-terminated alkylsiloxane monolayer that was then reacted with a hetero-bifunctional cross-linking reagent, and the resulting maleimide endgroup surface then provided for covalent interactions with the naturally occurring single surface cysteine 102 of the yeast cytochrome c. The bimolecular complex was formed by further incubating these cytochrome c monolayers in detergent-solubilized cytochrome oxidase. The sequential formation of such monolayers and the vectorially oriented nature of the cytochrome oxidase was studied via meridional x-ray diffraction, which directly provided electron density profiles of the protein(s) along the axis normal to the substrate plane. The nature of these profiles is consistent with previous work performed on vectorially oriented monolayers of either cytochrome c or cytochrome oxidase alone. Furthermore, optical spectroscopy has indicated that the rate of binding of cytochrome oxidase to the cytochrome c monolayer is an order of magnitude faster than the binding of cytochrome oxidase to an amine-terminated surface that was meant to mimic the ring of lysine residues around the heme edge of cytochrome c, which are known to be involved in the binding of this protein to cytochrome oxidase.

Molecular dynamics simulations of a protein on hydrophobic and hydrophilic surfaces

Molecular dynamics simulations have been used to investigate the behavior of the peripheral membrane protein, cytochrome c, covalently tethered to hydrophobic (methyl-terminated) and hydrophilic (thiol-terminated) self-assembled monolayers (SAMs). The simulations predict that the protein will undergo minor structural changes when it is tethered to either surface, and the structures differ qualitatively on the two surfaces: the protein is less spherical on the hydrophilic SAM where the polar surface residues reach out to interact with the SAM surface. The protein is completely excluded from the hydrophobic SAM but partially dissolves in the hydrophilic SAM. Consequently, the surface of the thiol-terminated SAM is considerably less ordered than that of the methyl-terminated SAM, although a comparable, high degree of order is maintained in the bulk of both SAMs: the chains exhibit collective tilts in the nearest-neighbor direction at angles of 20 degrees and 17 degrees with respect to the surface normal in the hydrophobic and the hydrophilic SAMs, respectively. On the hydrophobic SAM the protein is oriented so that the heme plane is more nearly parallel to the surface, whereas on the hydrophilic surface it is more nearly perpendicular. The secondary structure of the protein, dominated by alpha helices, is not significantly affected, but the structure of the loops as well as the helix packing is slightly modified by the surfaces.

Vectorially oriented monolayers of detergent-solubilized Ca(2+) -ATPase from sarcoplasmic reticulum

A method for tethering proteins to solid surfaces has been utilized to form vectorially oriented monolayers of the detergent-solubilized integral membrane protein Ca(2+) -ATPase from the sarcoplasmic reticulum (SR). Bifunctional, organic self-assembled monolayers (SAMs) possessing "headgroup" binding specificity for the substrate and "endgroup" binding specificity for the enzyme were utilized to tether the enzyme to the substrate. Specifically, an amine-terminated 11-siloxyundecaneamine SAM was found to bind the Ca(2+)-ATPase primarily electrostatically. The Ca(2+)-ATPase was labeled with the fluorescent probe 5-(2-[(iodoacetyl)amino]ethyl)aminonaphthalene-1-sulfonic acid before monolayer formation. Consequently, fluorescence measurements performed on amine-terminated SAM/enzyme monolayers formed on quartz substrates served to establish the nature of protein binding. Formation of the monolayers on inorganic multilayer substrates fabricated by molecular beam epitaxy made it possible to use x-ray interferometry to determine the profile structure for the system, which was proved correct by x-ray holography. The profile structures established the vectorial orientation of the Ca(2+)-ATPase within these monolayers, to a spatial resolution of approximately 12 A. Such vectorially oriented monolayers of detergent-solubilized Ca(2+)-ATPase from SR make possible a wide variety of correlative structure/function studies, which would serve to elucidate the mechanism of Ca(2+) transport by this enzyme.

Molecular dynamics investigation of the structure of a fully hydrated gel-phase dipalmitoylphosphatidylcholine bilayer

We report the results of a constant pressure and temperature molecular dynamics simulation of a gel-phase dipalmitoylphosphatidylcholine bilayer with nw = 11.8 water molecules/lipid at 19 degrees C. The results of the simulation were compared in detail with a variety of x-ray and neutron diffraction data. The average positions of specific carbon atoms along the bilayer normal and the interlamellar spacing and electron density profile were in very good agreement with neutron and x-ray diffraction results. The area per lipid and the details of the in-plane hydrocarbon chain structure were in excellent agreement with wide-angle x-ray diffraction results. The only significant deviation is that the chains met in a pleated arrangement at the bilayer center, although they should be parallel. Novel discoveries made in the present work include the observation of a bimodal headgroup orientational distribution. Furthermore, we found that there are a significant number of gauche conformations near the ends of the hydrocarbon chains and, in addition to verifying a previous suggestion that there is partial rotational ordering in the hydrocarbon chains, that the two chains in a given molecule are inequivalent with respect to rotations. Finally, we have investigated the lipid/water interface and found that the water penetrates beneath the headgroups, but not as far as the carbonyl groups, that the phosphates are strongly hydrated almost exclusively at the nonesterified oxygen atoms, and that the hydration of the ammonium groups is more diffuse, with some water molecules concentrated in the grooves between the methyl groups.

Vectorially oriented membrane protein monolayers: profile structures via x-ray interferometry/holography

X-ray interferometry/holography was applied to meridional x-ray diffraction data to determine uniquely the profile structures of a single monolayer of an integral membrane protein and a peripheral membrane protein, each tethered to the surface of a solid inorganic substrate. Bifunctional, organic self-assembled monolayers (SAMs) were utilized to tether the proteins to the surface of Ge/Si multilayer substrates, fabricated by molecular beam epitaxy, to facilitate the interferometric/holographic x-ray structure determination. The peripheral membrane protein yeast cytochrome c was covalently tethered to the surface of a sulfhydryl-terminated 11-siloxyundecanethiol SAM via a disulfide linkage with residue 102. The detergent-solubilized, photosynthetic reaction center integral membrane protein was electrostatically tethered to the surface of an analogous amine-terminated SAM. Optical absorption measurements performed on these two tethered protein monolayer systems were consistent with the x-ray diffraction results indicating the reversible formation of densely packed single monolayers of each fully functional membrane protein on the surface of the respective SAM. The importance of utilizing the organic self-assembled monolayers (as opposed to Langmuir-Blodgett) lies in their ability to tether specifically both soluble peripheral membrane proteins and detergent-solubilized integral membrane proteins. The vectorial orientations of the cytochrome c and the reaction center molecules were readily distinguishable in the profile structure of each monolayer at a spatial resolution of 7 A.

Changes in the relative occupancy of metal-binding sites in the profile structure of the sarcoplasmic reticulum membrane induced by phosphorylation of the Ca2+ATPase enzyme in the presence of terbium: a time-resolved, resonance x-ray diffraction study

Time-resolved, terbium resonance x-ray diffraction experiments have provided the locations of three different high-affinity metal-binding/transport sites on the Ca2+ATPase enzyme in the profile structure of the sarcoplasmic reticulum (SR) membrane. By considering these results in conjunction with the known, moderate-resolution profile structure of the SR membrane (derived from nonresonance x-ray and neutron diffraction studies), it was determined that the three metal-binding sites are located at the "headpiece/stalk" junction in the Ca2+ATPase profile structure, in the "transbilayer" portion of the enzyme profile near the center of the membrane phospholipid bilayer, and at the intravesicular surface of the membrane profile. All three metal-binding sites so identified are simultaneously occupied in the unphosphorylated enzyme conformation. Phosphorylation of the ATPase causes a redistribution of metal density among the sites, resulting in a net movement of metal density toward the intravesicular side of the membrane, i.e., in the direction of calcium active transport. We propose that this redistribution of metal density is caused by changes in the relative binding affinities of the three sites, mediated by local structural changes at the sites resulting from the large-scale (i.e., long-range) changes in the profile structure of the Ca2+ATPase induced by phosphorylation, as reported in an accompanying paper. The implications of these results for the mechanism of calcium active transport by the SR Ca2+ATPase are discussed briefly.

Changes in the profile structure of the sarcoplasmic reticulum membrane induced by phosphorylation of the Ca2+ ATPase enzyme in the presence of terbium: a time-resolved x-ray diffraction study

The design of the time-resolved x-ray diffraction experiments reported in this and an accompanying paper was based on direct measurements of enzyme phosphorylation using [gamma-32P]ATP that were employed to determine the extent to which the lanthanides La3+ and Tb3+ activate phosphorylation of the Ca2+ATPase and their effect on the kinetics of phosphoenzyme formation and decay. We found that, under the conditions of our experiments, the two lanthanides are capable of activating phosphorylation of the ATPase, resulting in substantial levels of phosphoenzyme formation and they slow the formation and dramatically extend the lifetime of the phosphorylated enzyme conformation, as compared with calcium activation. The results from the time-resolved, nonresonance x-ray diffraction work reported in this paper are consistent with the enzyme phosphorylation experiments; they indicate that the changes in the profile structure of the SR membrane induced by terbium-activated phosphorylation of the ATPase enzyme are persistent over the much longer lifetime of the phosphorylated enzyme and are qualitatively similar to the changes induced by calcium-activated phosphorylation, but smaller in magnitude. These results made possible the time-resolved, resonance x-ray diffraction studies reported in an accompanying paper utilizing the resonance x-ray scattering from terbium, replacing calcium, to determine not only the location of high-affinity metal-binding sites in the SR membrane profile, but also the redistribution of metal density among those sites upon phosphorylation of the Ca2+ATPase protein, as facilitated by the greatly extended lifetime of the phosphoenzyme.

Effect of Ca2+ binding on the profile structure of the sarcoplasmic reticulum membrane using time-resolved x-ray diffraction

A number of studies have indicated that Ca(2+)-ATPase, the integral membrane protein of the sarcoplasmic reticulum (SR) membrane, undergoes some structural change upon Ca2+ binding to its high affinity binding sites (i.e., upon conversion of the E1 to the CaxE1 form of the enzyme). We have used x-ray diffraction to study the changes in the electron density profile of the SR membrane upon high-affinity Ca2+ binding to the enzyme in the absence of enzyme phosphorylation. The photolabile Ca2+ chelator DM-nitrophen was used to rapidly release Ca2+ into the extravesicular spaces throughout an oriented SR membrane multilayer and thereby synchronously in the vicinity of the high affinity binding sites of each enzyme molecule in the multilayer. A critical control was developed to exclude possible artifacts arising from heating and non-Ca2+ photolysis products in the membrane multilayer specimens upon photolysis of the DM-nitrophen. Upon photolysis, changes in the membrane electron density profile arising from high-affinity Ca2+ binding to the enzyme are found to be localized to three different regions within the profile. These changes can be attributed to the added electron density of the Ca2+ bound at three discrete sites centered at 5, approximately 30, and approximately 67 A in the membrane profile, but they also require decreased electron density within the cylindrically averaged profile structure of the Ca(2+)-ATPase immediately adjacent (< 15 A) to these sites. The locations of these three Ca2+ binding sites in the SR membrane profile span most of the membrane profile in the absence of enzyme phosphorylation,in agreement with the locations of lanthanide (Tb3+ and La3+) binding sites in the membrane profile determined independently by using resonance x-ray diffraction.

Structural investigation of the covalent and electrostatic binding of yeast cytochrome c to the surface of various ultrathin lipid multilayers using x-ray diffraction

X-Ray diffraction was used to characterize the profile structures of ultrathin lipid multilayers having a bound surface layer of cytochrome c. The lipid multilayers were formed on an alkylated glass surface, using the Langmuir-Blodgett method. The ultrathin lipid multilayers of this study were: five monolayers of arachidic acid, four monolayers of arachidic acid with a surface monolayer of dimyristoyl phosphatidylserine, and four monolayers of arachidic acid acid with a surface monolayer of thioethyl stearate. Both the phosphatidylserine and the thioethyl stearate surfaces were found previously to covalently bind yeast cytochrome c, while the arachidic acid surface electrostatically binds yeast cytochrome c. Meridional x-ray diffraction data were collected from these lipid multilayer films with and without a bound yeast cytochrome c surface layer. A box refinement technique, previously shown to be effective in deriving the profile structures of ultrathin multilayer lipid films with and without electrostatically bound cytochrome c, was used to determine the multilayer electron density profiles. The surface monolayer of bound cytochrome c was readily apparent upon comparison of the multilayer electron density profiles for the various pairs of ultrathin multilayer films plus/minus cytochrome c for all cases. In addition, cytochrome c binding to the multilayer surface significantly perturbs the underlying lipid monolayers.

Location of high-affinity metal binding sites in the profile structure of the Ca+2-ATPase in the sarcoplasmic reticulum by resonance x-ray diffraction

Resonance x-ray diffraction measurements on the lamellar diffraction from oriented multilayers of isolated sarcoplasmic reticulum (SR) membranes containing a small concentration of lanthanide (III) ions (lanthanide/protein molar ratio approximately 4) have allowed us to calculate both the electron density profile of the SR membrane and the separate electron density profile of the resonant lanthanide atoms bound to the membrane to a relatively low spatial resolution of approximately 40 A. Analysis of the membrane electron density profile and modeling of the separate low resolution lanthanide atom profile, using step-function electron density models based on the assumption that metal binding sites in the membrane profile are discrete and localized, resulted in the identification of a minimum of three such binding sites in the membrane profile. Two of these sites are low-affinity, low-occupancy sites identified with the two phospholipid polar headgroup regions of the lipid bilayer within the membrane profile. Up to 20% of the total lanthanide (III) ions bind to these low-affinity sites. The third site has relatively high affinity for lanthanide ion binding; its Ka is roughly an order of magnitude larger than that for the lower affinity polar headgroup sites. Approximately 80% of the total lanthanide ions present in the sample are bound to this high-affinity site, which is located in the "stalk" portion of the "headpiece" within the profile structure of the Ca+2 ATPase protein, approximately 12 A outside of the phospholipid polar headgroups on the extravesicular side of the membrane profile. Based on the nature of our results and on previous reports in the literature concerning the ability of lanthanide (III) ions to function as Ca+2 analogues for the Ca+2 ATPase we suggest that we have located a high-affinity metal binding site in the membrane profile which is involved in the active transport of Ca+2 ions across the SR membrane by the Ca+2 ATPase.

A new method for monitoring the kinetics of calcium binding to the sarcoplasmic reticulum Ca(2+)-ATPase employing the flash-photolysis of caged-calcium

The kinetics of Ca2+ binding to the high-affinity sites of the sarcoplasmic reticulum (SR) Ca2(+)-ATPase were directly investigated by continuously monitoring the extravesicular calcium concentration via the metallochromic indicator Arsenazo III following the release of Ca2+ from a photolabile caged-calcium molecule, 1-(2-nitro-4,5-dimethoxyphenyl)-N,N,N',N'-tetrakis [(oxycarbony)methyl]-1,2-ethanediamine (DM-nitrophen), utilizing a pulsed Nd:YAG laser for photolysis. The nature of the binding kinetics is at least biphasic over the first 400 ms for vesicular dispersions of SR. The stoichiometry for calcium binding expressed as Ca:E1 approximately P has been calculated to be approximately 1.4:1 for the pure SR preparation under the reaction conditions employed.

Large-scale structural changes in the sarcoplasmic reticulum ATPase appear essential for calcium transport

Model refinement calculations utilizing the results from time-resolved x-ray diffraction studies indicate that specific, large-scale changes (i.e., structural changes over a large length scale or long range) occur throughout the cylindrically averaged profile structure of the sarcoplasmic reticulum ATPase upon its phosphorylation during calcium active transport. Several physical-chemical factors, all of which slow the kinetics of phosphoenzyme formation, induce specific, large-scale changes throughout the profile structure of the unphosphorylated enzyme that in general are opposite to those observed upon phosphorylation. These results suggest that such large-scale structural changes in the ATPase occurring upon its phosphorylation are required for its calcium transport function.

Orientation and lateral mobility of cytochrome c on the surface of ultrathin lipid multilayer films

We have previously shown that cytochrome c can be electrostatically bound to an ultrathin multilayer film having a negatively charged hydrophilic surface; furthermore, x-ray diffraction and absorption spectroscopy techniques indicated that the cytochrome c was bound to the surface of these ultrathin multilayer films as a molecular monolayer. The ultrathin fatty acid multilayers were formed on alkylated glass, using the Langmuir-Blodgett method. In this study, optical linear dichroism was used to determine the average orientation of the heme group within cytochrome c relative to the multilayer surface plane. The cytochrome c was either electrostatically or covalently bound to the surface of an ultrathin multilayer film. Horse heart cytochrome c was electrostatically bound to the hydrophilic surface of fatty acid multilayer films having an odd number of monolayers. Ultrathin multilayer films having an even number of monolayers would not bind cytochrome c, as expected for such hydrophobic surfaces. Yeast cytochrome c was covalently bound to the surface of a multilayer film having an even number of fatty acid monolayers plus a surface monolayer of thioethyl stearate. After washing extensively with buffer, the multilayer films with either electrostatically or covalently bound cytochrome c were analyzed for bound protein by optical absorption spectroscopy; the orientation of the cytochrome c heme was then investigated via optical linear dichroism. Polarized optical absorption spectra were measured from 450 to 600 nm at angles of 0 degrees, 30 degrees, and 45 degrees between the incident light beam and the normal to the surface plane of the multilayer. The dichroic ratio for the heme alpha-band at 550 nm as a function of incidence angle indicated that the heme of the electrostatically-bound monolayer of cytochrome c lies, on average, nearly parallel to the surface plane of the ultrathin multilayer. Similar results were obtained for the covalently-bound yeast cytochrome c. Furthermore, fluorescence recovery after photobleaching (FRAP) was used to characterize the lateral mobility of the electrostatically bound cytochrome c over the monolayer plane. The optical linear dichroism and these initial FRAP studies have indicated that cytochrome c electrostatically bound to a lipid surface maintains a well-defined orientation relative to the membrane surface while exhibiting measurable, but highly restricted, lateral motion in the plane of the surface.

Evidence that lipid lateral phase separation induces functionally significant structural changes in the Ca+2ATPase of the sarcoplasmic reticulum

We have studied lipid lateral phase separation (LPS) in the intact sarcoplasmic reticulum (SR) membrane and in bilayers of isolated SR membrane lipids as a function of temperature, [Mg+2], and degree of hydration. Lipid LPS was observed in both the intact membrane and in the bilayers of isolated SR lipids, and the LPS behavior of both systems was found to be qualitatively similar. Namely, lipid LPS occurs only at relatively low temperature and water content, independently of the [Mg+2], and the upper characteristic temperature (th) for lipid LPS for both the membrane and bilayers of its isolated lipids coincide to within a few degrees. However, at similar temperatures, isolated lipids show more LPS than the lipids in the intact membrane. Lipid LPS in the intact membrane and in bilayers of the isolated lipids is fully reversible, and more extensive for samples partially dehydrated at temperatures below th. Our previous x-ray diffraction studies established the existence of a temperature-induced transition in the profile structure of the sarcoplasmic reticulum Ca+2ATPase which occurs at a temperature corresponding to the [Mg+2]-dependent upper characteristic temperature for lipid LPS in the SR membrane. Furthermore, the functionality of the ATPase, and in particular the lifetime of the first phosphorylated enzyme conformation (E1 approximately P) in the Ca+2 transport cycle, were also found to be linked to the occurrence of this structural transition. The hysterisis observed in lipid LPS behavior as a function of temperature and water content provides a possible explanation for the more efficient transient trapping of the enzyme in the E1 approximately P conformation observed in SR membranes partially dehydrated at temperatures below th. The observation that LPS behavior for the intact SR membrane and bilayers of isolated SR lipids (no protein present) are qualitatively similar strongly suggests that the LPS behavior of the SR membrane lipids is responsible for the observed structural change in the Ca+2ATPase and the resulting significant increase in E1 approximately P lifetime for temperatures below th.

Location of the heme-Fe atoms within the profile structure of a monolayer of cytochrome c bound to the surface of an ultrathin lipid multilayer film

We have recently developed x-ray diffraction methods to derive the profile structure of ultrathin lipid multilayer films having one to five bilayers (e.g., Skita, V., W. Richardson, M. Filipkowski, A.F. Garito, and J.K. Blasie. 1987. J. Physique. 47:1849-1855). Furthermore, we have employed these techniques to determine the location of a monolayer of cytochrome c bound to the carboxyl group surface of various ultrathin lipid multilayer substrates via nonresonance x-ray diffraction (Pachence, J.M., and J.K. Blasie. 1987. Biophys. J. 52:735-747). Here an intense tunable source of x-rays (beam line X9-A at the National Synchrotron Light Source at the Brookhaven National Laboratory) was utilized to measure the resonance x-ray diffraction effect from the heme-Fe atoms within the cytochrome c molecular monolayer located on the carboxyl surface of a five monolayer arachidic acid film. Lamellar x-ray diffraction was recorded for energies above, below, and at the Fe K-absorption edge (E = 7,112 eV). An analysis of the resonance x-ray diffraction effect is presented, whereby the location of the heme-Fe atoms within the electron density profile of the cytochrome c/arachidic acid ultrathin multilayer film is indicated to +/- 3 A accuracy.

Effect of Mg2+ concentration on Ca2+ uptake kinetics and structure of the sarcoplasmic reticulum membrane

Direct measurements of phosphorylation of the Ca2+ ATPase of the sarcoplasmic reticulum (SR) have shown that the lifetime of the first phosphorylated intermediate in the Ca2+ transport cycle, E1 approximately P, increases with decreasing [Mg2+] (Dupont, Y. 1980. Eur. J. Biochem. 109:231-238). Previous x-ray diffraction work (Pascolini, D., and J.K. Blasie. 1988. Biophys. J. 54:669-678) under high [Mg2+] conditions (25 mM) indicated that changes in the profile structure of the SR membrane could be responsible for the low-temperature transient trapping of E1 approximately P that occurs at temperatures below 2-3 degrees C, the upper characteristic temperature th for lipid lateral phase separation in the membrane. We now present results of our study of the Ca2+ uptake kinetics and of the structure of the SR membrane at low [Mg2+] (less than or equal to 100 microM). Our results show a slowing in the kinetics of both phases of the Ca2+ uptake process and an increase in the duration of the plateau of the fast phase before the onset of the slow phase, indicating an increase in the lifetime (transient trapping) of E1 approximately P. Calcium uptake kinetics at low [Mg2+] and moderately low temperature (approximately 0 degree C) are similar to those observed at much lower temperatures (approximately -10 degrees C) at high [Mg2+]. The temperature-induced structural changes that we observed at low [Mg2+] are much more pronounced than those found to occur at higher [Mg2+]. Also, at the lower [Mg2+] the upper characteristic temperature th for lipid lateral phase separation was found to be higher, at approximately 8-10 degrees C. Our studies indicate that both temperature and [Mg2+] affect the structure and the functionality (as measured by changes in the kinetics of Ca2+ uptake) of the SR membrane. Membrane lipid phase behavior and changes in the Ca2+ ATPase profile structure seem to be related, and we have found that structural changes are responsible for the slowing of the kinetics of the fast phase of Ca2+ uptake, and could also mediate the effect that [Mg2+] has on E1 approximately P lifetime.

Moderate resolution profile structure of the sarcoplasmic reticulum membrane under low temperature conditions for the transient trapping of E1 approximately P

The calcium uptake reaction kinetics of isolated sarcoplasmic reticulum (SR) vesicles have previously been shown to be at least biphasic over a range of temperatures (26 to 10 degrees C) with a fast phase identified with the formation of E1 approximately P and calcium occlusion and a slow phase with Ca2+ translocation across the membrane and turnover of the Ca2+ ATPase ensemble. At "low" temperatures, namely 0 degrees C or lower, E1 approximately P formation is slowed and E1 approximately P is transiently trapped for at least several seconds, as indicated by the absence of the slow phase for 6 s or more. We now report that a reversible, temperature-induced structural transition occurs at about 2-3 degrees C for the isolated SR membrane. We have investigated the nature of this structural transition utilizing meridional and equatorial x-ray diffraction studies of the oriented SR membrane multilayers in the range of temperatures between 7.5 and -2 degrees C. The phase meridional (lamellar) diffraction has provided the profile structure for the SR membrane at the highest vs. lowest temperature at the same moderate resolution of 16-17 A while the equatorial diffraction has provided information on the average lipid chain packing in the SR membrane plane in the two cases. To identify the contribution of each membrane component in producing the differences between the profile structures at 7.5 and -2 degrees C, step-function models have been fitted to the moderate resolution electron density profiles. Lipid lateral phase separation may be responsible for inducing the structural change in the Ca2+ ATPase, thereby resulting in the slowing of E1 approximately P formation and the transient trapping of E1 approximately P at the "lower" temperatures.

The location of cytochrome c on the surface of ultrathin lipid multilayer films using x-ray diffraction

X-ray diffraction and spectroscopic techniques were used to characterize ultrathin fatty acid multilayers having a bound surface layer of cytochrome c. Three to six monolayers of arachidic acid were deposited onto an alkylated glass surface, using the Langmuir-Blodgett method. These fatty acid multilayer films were stored either in a 1 mM NaHCO3 pH 7.5 solution or a buffered 10 microM cytochrome c solution, pH 7.5. After washing extensively with buffer, these multilayer films were assayed for bound cytochrome c by optical spectroscopy. It was found that the cytochrome c bound only to the odd-numbered monolayer films (which have hydrophilic surfaces). The theoretical number of cytochrome c molecules bound to the ultrathin multilayer films having three or five monolayers was calculated as N = 1.2 x 10(13)/cm2 (assuming a hexagonally close-packed monolayer of protein), which would produce an optical density of 0.002 at a wavelength of 550 nm; for a three or five monolayer ultrathin film that was incubated with cytochrome c, OD550 approximately equal to 0.002. The protein was released from the film when treated with greater than 100 mM KCl solution, as would be expected for an electrostatic interaction. Meridional x-ray diffraction data were collected from the arachidic acid films with and without a bound cytochrome c layer. A box refinement technique, previously shown to be effective in deriving the profile structures of nonperiodic ultrathin films, was used to determine the multilayer electron density profiles. The electron density profiles and their autocorrelation functions showed that bound cytochrome c resulted in an additional electron dense feature on the multilayer surface, consistent with a bound cytochrome c monolayer. The position of the bound protein relative to the multilayer surface was independent of the number of fatty acid monolayers in the multilayer. Future studies will use these methods to investigate the structures of membrane protein complexes bound directly to the surface of multilayer films.

Phospholipid fatty acyl chain asymmetry in the membrane bilayer of isolated skeletal muscle sarcoplasmic reticulum

We previously showed [Herbette, L. G., Blasie, J. K., DeFoor, P., Fleischer, S., Bick, R. J., Van Winkle, W. B., Tate, C. A., & Entman, M. L. (1984) Arch. Biochem. Biophys. 234, 235-242; Herbette, L. G., DeFoor, P., Fleischer, S., Pascolini, D., Scarpa, A., & Blasie, J. K. (1985) Biochim. Biophys. Acta 817, 103-122] that the phospholipid head-group distribution in the membrane bilayer of isolated sarcoplasmic reticulum is asymmetric. From these studies, both the total number of phospholipid head groups and the total lipid, as well as the head-group species for these lipids, were found to be different for each monolayer of the membrane bilayer. In this paper, we demonstrate for the first time that there is significant asymmetry in the distribution of unsaturated fatty acids between the two monolayers; i.e., the outer monolayer of the sarcoplasmic reticulum contained more unsaturated and polyunsaturated chains when compared to the inner monolayer. X-ray diffraction measurements demonstrated that the time-averaged fatty acyl chain extension for the outer monolayer was approximately 20% less than for the inner monolayer. This is consistent with the concept that the greater degree of unsaturation in the outer monolayer may provide for a decreased average fatty acyl chain extension for that layer. This architecture for the bilayer may be related to both the "resting" state mass distribution of the calcium pump protein within the membrane bilayer and possible "conformational" states of the calcium pump protein during calcium transport by the sarcoplasmic reticulum.

Electron density profile of two-dimensionally crystalline membranous cytochrome c oxidase at low resolution

Unilamellar vesicles of membranous cytochrome c oxidase have been isolated whose distribution of protein in the membrane plane was predominantly crystalline. The vesicles were collapsed via controlled partial dehydration, resulting, at first, in the formation of unoriented, mostly unstacked, membrane pairs. Further controlled partial dehydration resulted in the formation of oriented multilayers of stacks of membrane pairs, retaining the in-plane crystallinity. The above were monitored by electron microscopy and x-ray diffraction. Analysis of the x-ray diffraction from unoriented, unstacked membrane pairs by two independent methods provided the membrane electron density profile to 30 A resolution.

The separate profile structures of the functional calcium pump protein and the phospholipid bilayer within isolated sarcoplasmic reticulum membranes determined by X-ray and neutron diffraction

The detailed profile structure of the isolated sarcoplasmic reticulum membrane was studied utilizing a combination of X-ray and neutron diffraction. The water and lipid profile structures within the sarcoplasmic reticulum membrane were determined at 28 A resolution directly by neutron diffraction and selective deuteration of the water and lipid components. The previously determined electron density profile structure of the sarcoplasmic reticulum membrane at 12 A resolution was subjected to model refinement analysis constrained by the neutron diffraction results, thereby providing unique higher resolution calculated lipid and protein profile structures. It was found that the lipid bilayer profile structure of the isolated sarcoplasmic reticulum membrane is asymmetric, primarily the result of more lipid residing in the inner versus the outer monolayer of the sarcoplasmic reticulum lipid bilayer. The asymmetry in the lipid composition was necessarily coincident with a complimentary asymmetry in the protein mass distribution between the two monolayers in order to preserve the overall cross-sectional area of lipid and protein throughout the lipid bilayer region of the sarcoplasmic reticulum membrane profile structure. Approximately 50% of the mass of the total protein was found to be localized externally to the sarcoplasmic reticulum membrane lipid bilayer protruding from the outer lipid monolayer into the extravesicular medium. The structural features of the protein protrusion appear to be rather variable depending upon the environment of the sarcoplasmic reticulum membrane. This highly asymmetric structural organization of the sarcoplasmic reticulum membrane profile is consistent with its primary function of unidirectional calcium transport.

Time-resolved x-ray diffraction studies of the sarcoplasmic reticulum membrane during active transport

X-ray and neutron diffraction studies of oriented multilayers of a highly purified fraction of isolated sarcoplasmic reticulum (SR) have previously provided the separate profile structures of the lipid bilayer and the Ca2+-ATPase molecule within the membrane profile to approximately 10-A resolution. These studies used biosynthetically deuterated SR phospholipids incorporated isomorphously into the isolated SR membranes via phospholipid transfer proteins. Time-resolved x-ray diffraction studies of these oriented SR membrane multilayers have detected significant changes in the membrane profile structure associated with phosphorylation of the Ca2+-ATPase within a single turnover of the Ca2+-transport cycle. These studies used the flash photolysis of caged ATP to effectively synchronize the ensemble of Ca2+-ATPase molecules in the multilayer, synchrotron x-radiation to provide 100-500-ms data collection times, and double-beam spectrophotometry to monitor the Ca2+-transport process directly in the oriented SR membrane multilayer.

A 12 A resolution X-ray diffraction study of the profile structure of isolated bovine retinal rod outer segment disk membranes

Electron density profiles of disk membranes isolated from bovine retinal rod outer segments have been determined to 12 A resolution by analysis of the X-ray diffraction from oriented multilayers, in the absence of lipid phase separation. Data were collected on both film and a two-dimensional TV-detector; both detectors yielded identical patterns consisting of relatively sharp lamellar reflections of small mosaic spread. The unit cell repeat was reversibly varied over the range of 143 to 183 A. The diffraction patterns changed dramatically at 150 A; consequently, the low (less than 150 A) and high (greater than 150 A) periodicity data were independently analyzed via a swelling algorithm. The high periodicity data yielded two statistically equivalent phase choices corresponding to two symmetric, but different membrane profiles. The low periodicity data yielded essentially one, characteristically asymmetric profile. These profiles have been modeled with regard to the separate profiles of rhodopsin, lipid and water, subject to the known composition of the isolated disk membranes.

Phospholipid asymmetry in the isolated sarcoplasmic reticulum membrane

The total phospholipid content and distribution of phospholipid species between the outer and inner monolayers of the isolated sarcoplasmic reticulum membrane was measured by phospholipase A2 activities and neutron diffraction. Phospholipase measurements showed that specific phospholipid species were asymmetric in their distribution between the outer and inner monolayers of the sarcoplasmic reticulum lipid bilayer; phosphatidylcholine (PC) was distributed 48/52 +/- 2% between the outer and inner monolayer of the sarcoplasmic reticulum bilayer, 69% of the phosphatidyl-ethanolamine (PE) resided mainly in the outer monolayer of the bilayer, 85% of the phosphatidylserine (PS) and 88% of the phosphatidylinositol (PI) were localized predominantly in the inner monolayer. The total phospholipid distribution determined by these measurements was 48/52 +/- 2% for the outer/inner monolayer of the sarcoplasmic reticulum lipid bilayer. Sarcoplasmic reticulum phospholipids were biosynthetically deuterated and exchanged into isolated vesicles with both a specific lecithin and a general exchange protein. Neutron diffraction measurements directly provided lipid distribution profiles for both PC and the total lipid content in the intact sarcoplasmic reticulum membrane. The outer/inner monolayer distribution for PC was 47/53 +/- 1%, in agreement with phospholipase measurements, while that for the total lipid was 46/54 +/- 1%, similar to the phospholipase measurements. These neutron diffraction results regarding the sarcoplasmic reticulum membrane bilayer were used in model calculations for decomposing the electron-density profile structure (10 A resolution) of isolated sarcoplasmic reticulum previously determined by X-ray diffraction into structures for the separate membrane components. These structure studies showed that the protein profile structure within the membrane lipid bilayer was asymmetric, complementary to the asymmetric lipid structure. Thus, the total phospholipid asymmetry obtained by two independent methods was small but consistent with a complementary asymmetric protein structure, and may be related to the highly vectorial functional properties of the calcium pump ATPase protein in the sarcoplasmic reticulum membrane.

Comparison of the kinetics of calcium transport in vesicular dispersions and oriented multilayers of isolated sarcoplasmic reticulum membranes

Knowledge of the functional properties of the protein in oriented multilayers, in addition to vesicular dispersions, of membranes such as the isolated sarcoplasmic reticulum (SR), extends the variety of techniques that can be effectively used in studies of the membrane protein's structure or structural changes associated with its function. One technique requiring the use of oriented multilayers to provide more direct time-averaged and time-resolved structural investigations of the SR membrane is x-ray diffraction. Therefore, the kinetics of ATP-induced calcium uptake by isolated SR vesicles in dispersions and hydrated, oriented multilayers were compared. Ca2+ uptake was necessarily initiated by the addition of ATP through flash photolysis of caged ATP, P3-1-(2-nitro)phenylethyl adenosine 5'-triphosphate, with either a frequency-doubled ruby laser or a 200 W Hg arc lamp, and measured with two different detector systems that followed the absorbance changes of the metallochromic indicator arsenazo III, which is sensitive to changes in the extravesicular [Ca2+]. The temperature range investigated was -2 degrees to 26 degrees C. The Ca2+ uptake kinetics of SR membranes in both the vesicular dispersions and oriented multilayers consist of at least two phases, an initial fast phase and a subsequent slow phase. The fast phase, generally believed to be associated with the formation of the phosphorylated enzyme, E approximately P, is kinetically comparable in both SR dispersions and multilayers. The slow phase mathematically follows first-order kinetics with specific rate constants of approximately 0.6 s-1 and approximately 1.2 s-1 for the dispersions at 26 degrees C and multilayers at 21 degrees C, respectively, with the given experimental conditions. The slow phase, generally believed to be associated with the translocation of Ca+2, across the membrane profile, appears to be the same process in SR dispersions and multilayers through their virtually identical rate constants and their identical activation energies of 22 +/-1 kcal mol -1. The stoichiometry of ~2 mol Ca2+/mol ATP hydrolyzed was measured in dispersions for the slow phase of Ca2+ uptake. Photolysis of caged ATP with the lamp and the laser provides comparable results for the Ca2+ uptake kinetics in SR dispersions and multilayers. Laser flash photolysis, however, has the advantages of optimal time resolution and effective synchronization of the ensemble of Ca2+-ATPase molecules in the ATP initiated Ca2+ transport process.

Kinetics of calcium uptake by isolated sarcoplasmic reticulum vesicles using flash photolysis of caged adenosine 5'-triphosphate

The kinetics of ATP-induced Ca2+ uptake by vesicular dispersions of sarcoplasmic reticulum were determined with a time resolution of about 10 ms, depending on the temperature. Ca2+ uptake was initiated by the addition of ATP through the flash photolysis of P3-1-(2-nitrophenyl)-ethyl adenosine 5'-triphosphate utilizing a frequency-doubled ruby laser and measured with two different detector systems that followed the absorbance changes of the metallochromic indicator arsenazo III sensitive to changes in the extravesicular [Ca2+]. The temperature range investigated was -2 to 26 degrees C. The Ca2+ ionophore A23187 was used to distinguish those features of the Ca2+ uptake kinetics associated with the formation of a transmembrane Ca2+ gradient. The acid-stable phosphorylated enzyme intermediate, E approximately P, was determined independently with a quenched-flow technique. Ca2+ uptake is characterized by at least two phases, a fast initial phase and a slow phase. The fast phase exhibits pseudo-first-order kinetics with a specific rate constant of 64 +/- 10 s-1 at 23-26 degrees C, an activation energy of 16 +/- 1 kcal mol-1, and a delta S* of approximately 5 cal deg-1 mol-1, is insensitive to the presence of a Ca2+ ionophore, and occurs simultaneously with the formation of the phosphorylated enzyme, E approximately P, with a stoichiometry of approximately 2 mol of Ca2+/mol of phosphorylated enzyme intermediate. The slow phase also exhibits pseudo-first-order kinetics with a specific rate constant of 0.60 +/- 0.09 s-1 at 25-26 degrees C, an activation energy of 22 +/- 1 kcal mol-1, and a delta S* of approximately 16 cal deg-1 mol-1, is inhibited by the presence of a Ca2+ ionophore, and has a stoichiometry of approximately 2 mol of Ca2+/mol of ATP hydrolyzed.

A structural investigation of cytochrome c binding to photosynthetic reaction centers in reconstituted membranes

Mammalian cytochrome c can effectively replace bacterial cytochrome c2 as the electron donor to the bacterial photosynthetic reaction center in either the natural chromatophore or a reconstituted reaction center/phospholipid membrane. In this paper, the reconstituted membrane was used to describe the nature of cytochrome c binding to the reaction center, the location of bound cytochrome c in the membrane profile and the perturbation of the reaction center and phospholipid profile structures indicated by cytochrome c binding. These structural studies utilized the combined techniques of X-ray and neutron diffraction.

The determination of the separate Ca2+ pump protein and phospholipid profile structures within reconstituted sarcoplasmic reticulum membranes via X-ray and neutron diffraction

We have previously compared the electron density profiles for several highly-functional reconstituted sarcoplasmic reticulum membranes with that for the isolated sarcoplasmic reticulum membrane (Herbette, L., Scarpa, A., Blasie, J.K., Wang, C.T., Saito, A. and Fleischer, S. (1981) Biophys. J. 36, 47-72). In this paper, we compare the separate calcium pump protein profile within these reconstituted sarcoplasmic reticulum membranes, as derived by X-ray and neutron diffraction methods, with that within isolated sarcoplasmic reticulum membranes. In addition, the time-average perturbation of the lipid bilayer by the incorporated calcium pump protein within these reconstituted sarcoplasmic reticulum membranes has been determined in some detail.

Static and time-resolved structural studies of the Ca2+-ATPase of isolated sarcoplasmic reticulum

X-ray and neutron diffraction studies of oriented multilayers of isolated light sarcoplasmic reticulum (SR) have provided the separate profile structures of the lipid bilayer and the Ca2+-ATPase molecule within the membrane profile to approximately 10 A resolution. These studies utilized biosynthetically deuterated SR phospholipids incorporated isomorphously into the isolated SR membranes via exchange proteins. Time-resolved x-ray diffraction studies of these oriented SR membrane multilayers have indicated that significant changes occur in the membrane profile structure within a single turnover of the Ca2+-transport cycle. These studies utilized the flash photolysis of caged ATP to effectively synchronize the ensemble of Ca2+-ATPase molecules in the multilayer, synchrotron x-radiation to provide 100- to 500-millisecond data collection times, and double-beam spectrophotometry to monitor Ca2+ transport in the oriented SR membrane multilayer.