Extraordinarily slow nuclear spin relaxation in frozen laser-polarized 129Xe

Dramatic improvement in the "Bulk" hyperpolarization of 131Xe via spin exchange optical pumping probed using in situ low-field NMR

We report on hyperpolarization of quadrupolar (I=3/2) 131Xe via spin-exchange optical pumping. Observations of the 131Xe polarization dynamics via in situ low-field NMR show that the estimated alkali-metal/131Xe spin-exchange rates can be large enough to compete with 131Xe spin relaxation. 131Xe polarization up to 7.6±1.5% was achieved in ∼8.5×1020 spins-a ∼100-fold improvement in the total spin angular momentum-potentially enabling various applications, including: measurement of spin-dependent neutron-131Xe s-wave scattering; sensitive searches for time-reversal violation in neutron-131Xe interactions beyond the Standard Model; and surface-sensitive pulmonary MRI.

Enabling Clinical Technologies for Hyperpolarized 129 Xenon Magnetic Resonance Imaging and Spectroscopy

Hyperpolarization is a technique that can increase nuclear spin polarization with the corresponding gains in nuclear magnetic resonance (NMR) signals by 4-8 orders of magnitude. When this process is applied to biologically relevant samples, the hyperpolarized molecules can be used as exogenous magnetic resonance imaging (MRI) contrast agents. A technique called spin-exchange optical pumping (SEOP) can be applied to hyperpolarize noble gases such as 129 Xe. Techniques based on hyperpolarized 129 Xe are poised to revolutionize clinical lung imaging, offering a non-ionizing, high-contrast alternative to computed tomography (CT) imaging and conventional proton MRI. Moreover, CT and conventional proton MRI report on lung tissue structure but provide little functional information. On the other hand, when a subject breathes hyperpolarized 129 Xe gas, functional lung images reporting on lung ventilation, perfusion and diffusion with 3D readout can be obtained in seconds. In this Review, the physics of SEOP is discussed and the different production modalities are explained in the context of their clinical application. We also briefly compare SEOP to other hyperpolarization methods and conclude this paper with the outlook for biomedical applications of hyperpolarized 129 Xe to lung imaging and beyond.

A semi-empirical model to optimize continuous-flow hyperpolarized 129Xe production under practical cryogenic-accumulation conditions

Continuous-flow spin exchange optical pumping (SEOP) with cryogenic accumulation is a powerful technique to generate multiple, large volumes of hyperpolarized (HP) 129Xe in rapid succession. It enables a range of studies, from dark matter tracking to preclinical and clinical MRI. Multiple analytical models based on first principles atomic physics and device-specific design features have been proposed for individual processes within HP 129Xe production. However, the modeling efforts have not yet integrated all the steps involved in practical, large volume HP 129Xe production process (e.g., alkali vapor generation, continuous-flow SEOP, and cryogenic accumulation). Here, we use a simplified analytical model that couples both SEOP and cryogenic accumulation, incorporating only two system-specific empirical parameters: the longitudinal relaxation time of the polycrystalline 129Xe "snow', T1snow, generated during cryogenic accumulation, and 2) the average Rb density during active, continuous-flow polarization. By fitting the model to polarization data collected from >140 L of 129Xe polarized across a range of flow and volume conditions, the estimates for Rb density and T1snow were 1.6 ± 0.1 × 1013 cm-3 and 84 ± 5 min, respectively - each notably less than expected based on previous literature. Together, these findings indicate that 1) earlier polarization predictions were hindered by miscalculated Rb densities, and 2) polarization is not optimized by maximizing SEOP efficiency with a low concentration 129Xe, but rather by using richer 129Xe-buffer gas blends that enable faster accumulation. Accordingly, modeling and experimentation revealed the optimal fraction of 129Xe, f, in the 129Xe-buffer gas blend was ~2%. Further, if coupled with modest increases in laser power, the model predicts liter volumes of HP 129Xe with polarizations exceeding 60% could be generated routinely in only tens of minutes.

Batch-Mode Clinical-Scale Optical Hyperpolarization of Xenon-129 Using an Aluminum Jacket with Rapid Temperature Ramping

We present spin-exchange optical pumping (SEOP) using a third-generation (GEN-3) automated batch-mode clinical-scale ¹²⁹Xe hyperpolarizer utilizing continuous high-power (∼170 W) pump laser irradiation and a novel aluminum jacket design for rapid temperature ramping of xenon-rich gas mixtures (up to 2 atm partial pressure). The aluminum jacket design is capable of heating SEOP cells from ambient temperature (typically 25 °C) to 70 °C (temperature of the SEOP process) in 4 min, and perform cooling of the cell to the temperature at which the hyperpolarized gas mixture can be released from the hyperpolarizer (with negligible amounts of Rb metal leaving the cell) in approximately 4 min, substantially faster (by a factor of 6) than previous hyperpolarizer designs relying on air heat exchange. These reductions in temperature cycling time will likely be highly advantageous for the overall increase of production rates of batch-mode (i.e., stopped-flow) ¹²⁹Xe hyperpolarizers, which is particularly beneficial for clinical applications. The additional advantage of the presented design is significantly improved thermal management of the SEOP cell. Accompanying the heating jacket design and performance, we also evaluate the repeatability of SEOP experiments conducted using this new architecture, and present typically achievable hyperpolarization levels exceeding 40% at exponential build-up rates on the order of 0.1 min^-1.

Metabolic and Molecular Imaging with Hyperpolarised Tracers

Since reaching the clinic, magnetic resonance imaging (MRI) has become an irreplaceable radiological tool because of the macroscopic information it provides across almost all organs and soft tissues within the human body, all without the need for ionising radiation. The sensitivity of MR, however, is too low to take full advantage of the rich chemical information contained in the MR signal. Hyperpolarisation techniques have recently emerged as methods to overcome the sensitivity limitations by enhancing the MR signal by many orders of magnitude compared to the thermal equilibrium, enabling a new class of metabolic and molecular X-nuclei based MR tracers capable of reporting on metabolic processes at the cellular level. These hyperpolarised (HP) tracers have the potential to elucidate the complex metabolic processes of many organs and pathologies, with studies so far focusing on the fields of oncology and cardiology. This review presents an overview of hyperpolarisation techniques that appear most promising for clinical use today, such as dissolution dynamic nuclear polarisation (d-DNP), parahydrogen-induced hyperpolarisation (PHIP), Brute force hyperpolarisation and spin-exchange optical pumping (SEOP), before discussing methods for tracer detection, emerging metabolic tracers and applications and progress in preclinical and clinical application.

Hyperpolarized gas MRI in pulmonology

Lung diseases have a high prevalence amongst the world population and their early diagnosis has been pointed out to be key for successful treatment. However, there is still a lack of non-invasive examination methods with sensitivity to early, local deterioration of lung function. Proton-based lung MRI is particularly challenging due to short T2* times and low proton density within the lung tissue. Hyperpolarized gas MRI is aan emerging technology providing a richness of methodologies which overcome the aforementioned problems. Unlike proton-based MRI, lung MRI of hyperpolarized gases may rely on imaging of spins in the lung's gas spaces or inside the lung tissue and thereby add substantial value and diagnostic potential to lung MRI. This review article gives an introduction to the MR physics of hyperpolarized media and presents the current state of hyperpolarized gas MRI of 3Headvasd and 129Xe in pulmonology. Key applications, ranging from static and dynamic ventilation imaging as well as oxygen-pressure mapping to 129Xe dissolved-phase imaging and spectroscopy are presented. Hyperpolarized gas MRI is compared to alternative examination methods based on MRI and future directions of hyperpolarized gas MRI are discussed.

A method for imaging and spectroscopy using γ-rays and magnetic resonance

Magnetic resonance imaging (MRI) provides fine spatial resolution, spectral sensitivity and a rich variety of contrast mechanisms for diagnostic medical applications. Nuclear imaging using γ-ray cameras offers the benefits of using small quantities of radioactive tracers that seek specific targets of interest within the body. Here we describe an imaging and spectroscopic modality that combines favourable aspects of both approaches. Spatial information is encoded into the spin orientations of tiny amounts of a polarized radioactive tracer using pulses of both radio-frequency electromagnetic radiation and magnetic-field gradients, as in MRI. However, rather than detecting weak radio-frequency signals, imaging information is obtained through the detection of γ-rays. A single γ-ray detector can be used to acquire an image; no γ-ray camera is needed. We demonstrate the feasibility of our technique by producing images and spectra from a glass cell containing only about 4 × 10(13) atoms (about 1 millicurie) of the metastable isomer (131m)Xe that were polarized using the laser technique of spin-exchange optical pumping. If the cell had instead been filled with water and imaged using conventional MRI, then it would have contained more than 10(24) water molecules. The high sensitivity of our modality expands the breadth of applications of magnetic resonance, and could lead to a new class of radioactive tracers.

Hyperpolarization of "Neat" Liquids by NMR Signal Amplification by Reversible Exchange

We report NMR Signal Amplification by Reversible Exchange (SABRE) hyperpolarization of the rare isotopes in "neat" liquids, each composed only of an otherwise pure target compound with isotopic natural abundance (n.a.) and millimolar concentrations of dissolved catalyst. Pyridine (Py) or Py derivatives are studied at 0.4% isotopic natural abundance ¹⁵N, deuterated, ¹⁵N enriched, and in various combinations using the SABRE-SHEATH variant (microTesla magnetic fields to permit direct ¹⁵N polarization from parahydrogen via reversible binding and exchange with an Ir catalyst). We find that the dilute n.a. ¹⁵N spin bath in Py still channels spin order from parahydrogen to dilute ¹⁵N spins, without polarization losses due to the presence of ¹⁴N or ²H. We demonstrate P(15N) ≈ 1% (a gain of 2900 fold relative to thermal polarization at 9.4 T) at high substrate concentrations. This fundamental finding has a significant practical benefit for screening potentially hyperpolarizable contrast agents without labeling. The capability of screening at n.a. level of ¹⁵N is demonstrated on examples of mono- and dimethyl-substituted Py (picolines and lutidines previously identified as promising pH sensors), showing that the presence of a methyl group in the ortho position significantly decreases SABRE hyperpolarization.

Multispin correlations and pseudo-thermalization of the transient density matrix in solid-state NMR: free induction decay and magic echo

Quantum unitary evolution typically leads to thermalization of generic interacting many-body systems. There are very few known general methods for reversing this process, and we focus on the magic echo, a radio-frequency pulse sequence known to approximately "rewind" the time evolution of dipolar coupled homonuclear spin systems in a large magnetic field. By combining analytic, numerical, and experimental results we systematically investigate factors leading to the degradation of magic echoes, as observed in reduced revival of mean transverse magnetization. Going beyond the conventional analysis based on mean magnetization we use a phase encoding technique to measure the growth of spin correlations in the density matrix at different points in time following magic echoes of varied durations and compare the results to those obtained during a free induction decay (FID). While considerable differences are documented at short times, the long-time behavior of the density matrix appears to be remarkably universal among the types of initial states considered - simple low order multispin correlations are observed to decay exponentially at the same rate, seeding the onset of increasingly complex high order correlations. This manifestly athermal process is constrained by conservation of the second moment of the spectrum of the density matrix and proceeds indefinitely, assuming unitary dynamics.

Toward 13C hyperpolarized biomarkers produced by thermal mixing with hyperpolarized 129Xe

The (13)C NMR signal of acetic acid 1-(13)C-AcH is enhanced by polarization transfer from hyperpolarized (129)Xe using a thermal mixing procedure. 1-(13)C-AcH acid and hyperpolarized (129)Xe are mixed as gases to disperse (129)Xe in the acetic acid. The mixture is frozen with liquid N(2) at 0.5 T. The magnetic field is then momentarily dropped to allow for exchange of spin polarization between (13)C and (129)Xe. After polarization exchange the magnetic field is raised to its original value and the mixture is thawed, resulting in a solution of polarization enhanced 1-(13)C-AcH. A (13)C nuclear spin polarization enhancement of 10 is observed compared to its thermal polarization at 4.7 T. This polarization enhancement is approximately three orders of magnitude lower than that predicted by theory. The discrepancy is attributed to the formation of either an inhomogeneous solid matrix and/or spin dynamics during polarization transfer. Despite the low polarization enhancement, this is the first report of polarization transfer from (129)Xe to (13)C nuclear spins achieved by thermal mixing for a proton-containing molecule of biomedical importance. If future work can increase the enhancement, this method will be useful in hyperpolarizing a wide range of (13)C enriched compounds important in biomedical and biophysical research.

Universal long-time behavior of nuclear spin decays in a solid

Magnetic resonance studies of nuclear spins in solids are exceptionally well suited to probe the limits of statistical physics. We report experimental results indicating that isolated macroscopic systems of interacting nuclear spins possess the following fundamental property: spin decays that start from different initial configurations quickly evolve towards the same long-time behavior. This long-time behavior is characterized by the shortest ballistic microscopic time scale of the system and therefore falls outside of the validity range for conventional approximations of statistical physics. We find that the nuclear free-induction decay and different solid echoes in hyperpolarized solid xenon all exhibit sinusoidally modulated exponential long-time behavior characterized by identical time constants. This universality was previously predicted on the basis of analogy with resonances in classical chaotic systems.

Water Soluble Cryptophanes Showing Unprecedented Affinity for Xenon: Candidates as NMR-Based Biosensors

Cryptophanes bearing OCH(2)COOH groups in place of the methoxy groups represent a new class of xenon-carrier molecules soluble in water at biological pH. By using (1)H and (129)Xe NMR (thermally- and laser-polarized dissolved gas), the structural and dynamical behaviors of these host molecules as well as their interaction with xenon are studied. They are shown to exist in aqueous solution under different conformations in very slow exchange. A saddle form present for one of these conformations could explain the (1)H NMR spectra. Whereas the cryptophanes in such a conformation are unable to complex xenon, unprecedented high binding constants are found for cryptophanes in the other canonical crown-crown conformation. These host molecules could therefore be valuable candidates for biosensing using (129)Xe MRI.

Study of the hydrophobic cavity of beta-cryptogein through laser-polarized xenon NMR spectroscopy

The interaction of xenon with beta-cryptogein, a basic 10 kDa protein belonging to the elicitin family, has been studied by using dissolved thermal and laser-polarized gas in liquid-state NMR. 13C and 1H chemical-shift-mapping experiments were unfruitful, the proton lines only experienced a slight narrowing but no significant frequency variation when the xenon concentration was increased. Nevertheless magnetization transfer from hyperpolarized xenon to protons of the protein demonstrates an undoubted interaction and enables localization of the noble-gas-binding site. Due to the proton-proton cross-relaxation efficiency, however, this experiment is subjected to important spin-diffusion. An automatic procedure that takes spin-diffusion into account when assigning the protons that interact with xenon is then used. The binding site, as defined by 30 Xe--H interactions, is situated in the inner core of the protein. The protons that interact with xenon border the channel by which sterols are known to enter into the cavity. These results support the idea that xenon is a good probe for hydrophobic protein regions.

Hyperpolarized xenon in NMR and MRI

Hyperpolarized gases have found a steadily increasing range of applications in nuclear magnetic resonance (NMR) and NMR imaging (MRI). They can be regarded as a new class of MR contrast agent or as a way of greatly enhancing the temporal resolution of the measurement of processes relevant to areas as diverse as materials science and biomedicine. We concentrate on the properties and applications of hyperpolarized xenon. This review discusses the physics of producing hyperpolarization, the NMR-relevant properties of 129Xe, specific MRI methods for hyperpolarized gases, applications of xenon to biology and medicine, polarization transfer to other nuclear species and low-field imaging.

Analysis of the effect of foreign gases in the production of hyperpolarized 129Xe gas on a simple system working under atmospheric pressure

Experimental conditions that affect the degree of polarization of 129Xe gas were tested for a higher degree of polarization to facilitate a laboratory use of 129Xe NMR, primarily on the effect of addition of foreign gases. When He, N(2), or D(2) gas was added separately to pure Xe gas with natural isotope abundance, D(2) gas gave better results than the others in enhancing the degree of polarization in 129Xe atom. When these gases were added in mixture, however, N(2) plus He was proved to be more efficient than D(2) or He in enhancing the degree of polarization. As a result, the degree of polarization was found to be increased by more than an order, when diluent gases were properly mixed; polarization as high as 35% was reached at gas composition of 5% Xe, 10% N(2), and 85% He, whereas only a few percent was attainable when Xe gas was polarized without mixing any foreign gases [J. Magn. Reson. 150 (2), 156-160 (2001)]. These results were discussed on a basis of quenching and buffer effects of foreign gases. Polarization was also measured after separating the pure Xe gas from the mixture; value of 22% was obtained for the Xe gas isolated after solidification in liquid nitrogen trap. Build-up time of the polarization was also tested, which did not change remarkably depending on the gas composition.

T1-relaxation of 129Xe on metal single crystal surfaces-multilayer experiments on iridium and monolayer considerations

The surface of a typical laboratory single crystal has about 10(15) surface atoms or adsorption sites, respectively, and is thus far out of reach for conventional NMR experiments using thermal polarization. It should however be in reach for NMR of adsorbed laser polarized (hyperpolarized) 129Xe, which is produced by spin transfer from optically pumped rubidium. With multilayer experiments of xenon adsorbed on an iridium surface we do not only demonstrate that monolayer sensitivity has been obtained, we also show that such surface experiments can be performed under ultra high vacuum conditions with the crystal being mounted in a typical surface analysis chamber on a manipulator with far-reaching sample heating and cooling abilities. With only four spectra summed up we present an NMR signal from at most 4x10(14) atoms of 129Xe, four layers of naturally abundant xenon, respectively. The fact that no monolayer signal has been measured so far is explained by a fast Korringa relaxation due to the Fermi contact interaction of the 129Xe nuclei with the electrons of the metal substrate. T(1)-relaxation times in the order of several ms have been calculated using all electron density functional theory for several metal substrates.

MRI of the lungs using hyperpolarized noble gases

The nuclear spin polarization of the noble gas isotopes (3)He and (129)Xe can be increased using optical pumping methods by four to five orders of magnitude. This extraordinary gain in polarization translates directly into a gain in signal strength for MRI. The new technology of hyperpolarized (HP) gas MRI holds enormous potential for enhancing sensitivity and contrast in pulmonary imaging. This review outlines the physics underlying the optical pumping process, imaging strategies coping with the nonequilibrium polarization, and effects of the alveolar microstructure on relaxation and diffusion of the noble gases. It presents recent progress in HP gas MRI and applications ranging from MR microscopy of airspaces to imaging pulmonary function in patients and suggests potential directions for future developments.

Fast nuclear spin relaxation in hyperpolarized solid 129Xe

We report extensive new measurements of the longitudinal relaxation time T1 of 129Xe nuclear spins in solid xenon. For temperatures T<120 K and magnetic fields B>0.05 T, we found T1 on the order of hours, in good agreement with previous measurements and with the predicted phonon-scattering limit for the spin-rotation interaction. For T>120 K, our new data show that T1 can be much shorter than the phonon scattering limit. For B = 0.06 T, a field often used to accumulate hyperpolarized xenon, T1 is approximately 6 s near the Xe melting point T(m) = 161.4 K. From T = 50 K to T(m), the new data are in excellent agreement with the theoretical prediction that the relaxation is due to (i) modulation of the spin-rotation interaction by phonons, and (ii) modulation of the dipole-dipole interaction by vacancy diffusion.

Nuclear magnetic resonance of laser-polarized noble gases in molecules, materials, and organisms

The sensitivity of conventional nuclear magnetic resonance (NMR) techniques is fundamentally limited by the ordinarily low spin polarization achievable in even the strongest NMR magnets. However, by transferring angular momentum from laser light to electronic and nuclear spins, optical pumping methods can increase the nuclear spin polarization of noble gases by several orders of magnitude, thereby greatly enhancing their NMR sensitivity. This review describes the principles and magnetic resonance applications of laser-polarized noble gases. The enormous sensitivity enhancement afforded by optical pumping can be exploited to permit a variety of novel NMR experiments across numerous disciplines. Many such experiments are reviewed, including the void-space imaging of organisms and materials, NMR and MRI of living tissues, probing structure and dynamics of molecules in solution and on surfaces, NMR sensitivity enhancement via polarization transfer, and low-field NMR and MRI.

129Xe-Xe molecular spin relaxation

We identify the formation of bound 129Xe-Xe molecules as the primary fundamental spin-relaxation process at densities below 14 amagat. Low pressure Xe relaxation rate measurements as a function of gas composition show that Xe-Xe molecular relaxation contributes 1/T1 = 1/4.1 h to the total observed relaxation rate. The measured rate is consistent with theoretical estimates deduced from previously measured NMR chemical shifts. At atmospheric pressure the molecular relaxation is more than an order of magnitude stronger than binary relaxation. Confusion of molecular and wall relaxation mechanisms has historically caused wall relaxation rates to be overestimated.

In vivo hyperpolarized 129Xe NMR spectroscopy in tumors

The first in vivo hyperpolarized 129Xe NMR study in experimental tumors is presented. Hyperpolarized 129Xe was dissolved in solutions, and was injected intratumorally in GH-3 prolactinomas in rats and RIF-1 fibrosarcomas in mice. The 129Xe NMR spectra and apparent spin-lattice relaxation times in the two tumor types present characteristic differences. These differences are discussed in terms of xenon exchange between the carrier medium and the tissue compartments.

In vivo 129Xe NMR in rat brain during intra-arterial injection of hyperpolarized 129Xe dissolved in a lipid emulsion

Hyperpolarized 129Xe was dissolved in a lipid emulsion and administered to anaesthetized rats by manual injections into the carotid (approximately 1-1.5 mL in a maximum time of 30 s). During injection, 129Xe NMR brain spectra at 2.35 T were recorded over 51 s, with a repetition time of 253 ms. Two peaks assigned to dissolved 129Xe were observed (the larger at 194 +/- 1 ppm assigned to intravascular xenon and the smaller at 199 +/- 1 ppm to xenon dissolved in the brain tissue). Their kinetics revealed a rapid intensity increase, followed by a plateau (approximately 15 s duration) and then a decrease over 5 s. This behaviour was attributed to combined influences of the T1 relaxation of the tracer, of radiofrequency sampling, and of the tracer perfusion rate in rat brain. Similar kinetics were observed in experiments carried out on a simple micro-vessel phantom. An identical experimental set-up was used to acquire a series of 2D projection 129Xe images on the phantom and the rat brain.

Exploring Surfaces and Cavities in Lipoxygenase and Other Proteins by Hyperpolarized Xenon-129 NMR

This paper presents an exploratory study of the binding interactions of xenon with the surface of several different proteins in the solution and solid states using both conventional and hyperpolarized (129)Xe NMR. The generation of hyperpolarized (129)Xe by spin exchange optical pumping affords an enhancement by 3-4 orders of magnitude of its NMR signal. As a result, it is possible to observe Xe directly bound to the surface of micromolar quantities of lyophilized protein. The highly sensitive nature of the (129)Xe line shape and chemical shift are used as indicators for the conditions most likely to yield maximal dipolar contact between (129)Xe nuclei and nuclear spins situated on the protein. This is an intermediate step toward achieving the ultimate goal of NMR enhancement of the binding-site nuclei by polarization transfer from hyperpolarized (129)Xe. The hyperpolarized (129)Xe spectra resulting from exposure of four different proteins in the lyophilized, powdered form have been examined for evidence of binding. Each of the proteins, namely, metmyoglobin, methemoglobin, hen egg white lysozyme, and soybean lipoxygenase, yielded a distinctly different NMR line shape. With the exception of lysozyme, the proteins all possess a paramagnetic iron center which can be expected to rapidly relax the (129)Xe and produce a net shift in its resonance position if the noble gas atom occupies specific binding sites near the iron. At temperatures from 223 to 183 K, NMR signals were observed in the 0-40 ppm chemical shift range, relative to Xe in the gas phase. The signals broadened and shifted downfield as the temperature was reduced, indicating that Xe is exchanging between the gas phase and internal or external binding sites of the proteins. Additionally, conventional (129)Xe NMR studies of metmyoglobin and lipoxygenase in the solution state are presented. The temperature dependence of the chemical shift and line shape indicate exchange of Xe between adsorption sites on lipoxygenase and Xe in the solvent on the slow to intermediate exchange time scale. The NMR results are compared with N(2), Xe, and CH(4) gas adsorption isotherms. It is found that lipoxygenase is unique among the proteins studied in possessing a relatively high affinity for gas molecules, and in addition, demonstrating the most clearly resolved adsorbed (129)Xe NMR peak in the lyophilized state.

Consequences of (129)Xe-(1)H cross relaxation in aqueous solutions

We have investigated the transfer of polarization from (129)Xe to solute protons in aqueous solutions to determine the feasibility of using hyperpolarized xenon to enhance (1)H sensitivity in aqueous systems at or near room temperatures. Several solutes, each of different molecular weight, were dissolved in deuterium oxide and although large xenon polarizations were created, no significant proton signal enhancement was detected in l-tyrosine, alpha-cyclodextrin, beta-cyclodextrin, apomyoglobin, or myoglobin. Solute-induced enhancement of the (129)Xe spin-lattice relaxation rate was observed and depended on the size and structure of the solute molecule. The significant increase of the apparent spin-lattice relaxation rate of the solution phase (129)Xe by alpha-cyclodextrin and apomyoglobin indicates efficient cross relaxation. The slow relaxation of xenon in beta-cyclodextrin and l-tyrosine indicates weak coupling and inefficient cross relaxation. Despite the apparent cross-relaxation effects, all attempts to detect the proton enhancement directly were unsuccessful. Spin-lattice relaxation rates were also measured for Boltzmann (129)Xe in myoglobin. The cross-relaxation rates were determined from changes in (129)Xe relaxation rates in the alpha-cyclodextrin and myoglobin solutions. These cross-relaxation rates were then used to model (1)H signal gains for a range of (129)Xe to (1)H spin population ratios. These models suggest that in spite of very large (129)Xe polarizations, the (1)H gains will be less than 10% and often substantially smaller. In particular, dramatic (1)H signal enhancements in lung tissue signals are unlikely.

Longitudinal relaxation times of 129Xe in rat tissue homogenates at 9.4 T

Longitudinal relaxation times of 129Xe were measured in homogenates of rat brain, kidney, liver, and lung at varying oxygenation levels as a means to assess the feasibility of magnetic resonance (MR) imaging of tissue using laser-polarized (LP) 129Xe as the signal source. The measured relaxation times ranged from 4.4 +/- 0.4 sec in deoxygenated lung homogenate to 22 +/- 2 sec in deoxygenated brain homogenate. When the LP gas is introduced to the subject via inhalation, these relaxation times are long enough to allow accumulation and subsequent MR imaging of LP 129Xe in tissues. Imaging of dissolved LP 129Xe will yield an intrinsic signal-to-noise ratio (SNR) that is approximately 3% of the proton intrinsic SNR. This relatively low intrinsic SNR is expected to be adequate for some tracer applications. T1 of 129Xe was found to depend on the oxygenation level of the tissue, and the effect of oxygenation is likely dependent on the amount of hemoglobin in the tissue homogenate.

Signal dynamics in magnetic resonance imaging of the lung with hyperpolarized noble gases

The nonequilibrium bulk magnetic moment of hyperpolarized (HP) noble gases generated by optical pumping has unique characteristics. Based on the Bloch equations, a model was developed describing the signal dynamics of HP gases used in magnetic resonance imaging (MRI) of the lung with special consideration to the breathing cycle. Experimental verification included extensive investigations with HP 3He and 129Xe during both inspiration and held breath in live guinea pigs. Radial acquisition was used to investigate the view variations with a temporal resolution of 5 ms. Agreement between theoretical predictions and in vivo results was excellent. Additionally, information about effects from noble gas diffusion and spin-lattice relaxation was obtained. In vivo results for T1 were 28.8 +/- 1.8 s for 3He and 31.3 +/- 1.8 s for 129Xe. Comparison with in vitro data indicated that relaxation in the pulmonary gas space is dominated by dipolar coupling with molecular oxygen. The results provide a quantitative basis for optimizing pulse sequence design in HP gas MRI of the lung.

SQUID detected NMR and NQR. Superconducting Quantum Interference Device

The dc Superconducting QUantum Interference Device (SQUID) is a sensitive detector of magnetic flux, with a typical flux noise of the order 1 muphi0 Hz(-1/2) at liquid helium temperatures. Here phi0 = h/2e is the flux quantum. In our NMR or NQR spectrometer, a niobium wire coil wrapped around the sample is coupled to a thin film superconducting coil deposited on the SQUID to form a flux transformer. With this untuned input circuit the SQUID measures the flux, rather than the rate of change of flux, and thus retains its high sensitivity down to arbitrarily low frequencies. This feature is exploited in a cw spectrometer that monitors the change in the static magnetization of a sample induced by radio frequency irradiation. Examples of this technique are the detection of NQR in 27Al in sapphire and 11B in boron nitride, and a level crossing technique to enhance the signal of 14N in peptides. Research is now focused on a SQUID-based spectrometer for pulsed NQR and NMR, which has a bandwidth of 0-5 MHz. This spectrometer is used with spin-echo techniques to measure the NQR longitudinal and transverse relaxation times of 14N in NH4ClO4, 63+/-6 ms and 22+/-2 ms, respectively. With the aid of two-frequency pulses to excite the 359 kHz and 714 kHz resonances in ruby simultaneously, it is possible to obtain a two-dimensional NQR spectrum. As a third example, the pulsed spectrometer is used to study NMR spectrum of 129Xe after polariza-tion with optically pumped Rb. The NMR line can be detected at frequencies as low as 200 Hz. At fields below about 2 mT the longitudinal relaxation time saturates at about 2000 s. Two recent experiments in other laboratories have extended these pulsed NMR techniques to higher temperatures and smaller samples. In the first, images were obtained of mineral oil floating on water at room temperature. In the second, a SQUID configured as a thin film gradiometer was used to detect NMR in a 50 microm particle of 195Pt at 6 mT and 4.2 K.

Development of hyperpolarized noble gas MRI

Magnetic resonance imaging using the MR signal from hyperpolarized noble gases 129Xe and 3He may become an important new diagnostic technique. Alex Pines (adapting the hyperpolarization technique pioneered by William Happer) presented MR spectroscopy studies using hyperpolarized 129Xe. The current authors recognized that the enormous enhancement in the delectability of 129Xe, promised by hyperpolarization, would solve the daunting SNR problems impeding their attempts to use 129Xe as an in vivo MR probe, especially in order to study the action of general anesthetics. It was hoped that hyperpolarized 129Xe MRI would yield resolutions equivalent to that achievable with conventional 1H2O MRI, and that xenon's solubility in lipids would facilitate investigations of lipid-rich tissues that had as yet been hard to image. The publication of hyperpolarized 129Xe images of excised mouse lungs heralded the emergence of hyperpolarized noble-gas MRI. Using hyperpolarized 3He, researchers have obtained images of the lung gas space of guinea pigs and of humans. Lung gas images from patients with pulmonary disease have recently been reported. 3He is easier to hyperpolarize than 129Xe, and it yields a stronger MR signal, but its extremely low solubility in blood precludes its use for the imaging of tissue. Xenon, however, readily dissolves in blood, and the T1, of dissolved 129Xe is long enough for sufficient polarization to be carried by the circulation to distal tissues. Hyperpolarized 129Xe dissolved-phase tissue spectra from the thorax and head of rodents and humans have been obtained, as have chemical shift 129 Xe images from the head of rats. Lung gas 129Xe images of rodents, and more recently of humans, have been reported. Hyperpolarized 129Xe MRI (HypX-MRI) may elucidate the link between the structure of the lung and its function. The technique may also be useful in identifying ventilation-perfusion mismatch in patients with pulmonary embolism, in staging and tracking the success of therapeutic approaches in patients with chronic obstructive airway diseases, and in identifying candidates for lung transplantation or reduction surgery. The high lipophilicity of xenon may allow MR investigations of the integrity and function of excitable lipid membranes. Eventually, HypX-MRI may permit better imaging of the lipid-rich structures of the brain. Cortical brain function is one perfusion-dependent phenomena that may be explored with hyperpolarized 129Xe MR. This leads to the exciting possibility of conducting hyperpolarized 129Xe functional MRI (HypX-fMRI) studies.

In vivo NMR and MRI using injection delivery of laser-polarized xenon

Because xenon NMR is highly sensitive to the local environment, laser-polarized xenon could be a unique probe of living tissues. Realization of clinical and medical science applications beyond lung airspace imaging requires methods of efficient delivery of laser-polarized xenon to tissues, because of the short spin-lattice relaxation times and relatively low concentrations of xenon attainable in the body. Preliminary results from the application of a polarized xenon injection technique for in vivo 129Xe NMR/MRI are extrapolated along with a simple model of xenon transit to show that the peak local concentration of polarized xenon delivered to tissues by injection may exceed that delivered by respiration by severalfold.

MR imaging and spectroscopy using hyperpolarized 129Xe gas: preliminary human results

Using a new method of xenon laser-polarization that permits the generation of liter quantities of hyperpolarized 129Xe gas, the first 129Xe imaging results from the human chest and the first 129Xe spectroscopy results from the human chest and head have been obtained. With polarization levels of approximately 2%, cross-sectional images of the lung gas-spaces with a voxel volume of 0.9 cm3 (signal-to-noise ratio (SNR), 28) were acquired and three dissolved-phase resonances in spectra from the chest were detected. In spectra from the head, one prominent dissolved-phase resonance, presumably from brain parenchyma, was detected. With anticipated improvements in the 129Xe polarization system, pulse sequences, RF coils, and breathing maneuvers, these results suggest the possibility for 129Xe gas-phase imaging of the lungs with a resolution approaching that of current conventional thoracic proton imaging. Moreover, the results suggest the feasibility of dissolved-phase imaging of both the chest and brain with a resolution similar to that obtained with the gas-phase images.

NMR of laser-polarized 129Xe in blood foam

Laser-polarized 129Xe dissolved in a foam preparation of fresh human blood was investigated. The NMR signal of 129Xe dissolved in blood was enhanced by creating a foam in which the dissolved 129Xe exchanged with a large reservoir of gaseous laser-polarized 129Xe. The dissolved 129Xe T1 in this system was found to be significantly shorter in oxygenated blood than in deoxygenated blood. The T1 of 129Xe dissolved in oxygenated blood foam was found to be approximately 21 (+/-5) s, and in deoxygenated blood foam to be greater than 40 s. To understand the oxygenation trend, T1 measurements were also made on plasma and hemoglobin foam preparations. The measurement technique using a foam gas-liquid exchange interface may also be useful for studying foam coarsening and other liquid physical properties.

Longitudinal relaxation and diffusion measurements using magnetic resonance signals from laser-hyperpolarized 129Xe nuclei

Methods for T1 relaxation and diffusion measurements based on magnetic resonance signals from laser-hyperpolarized 129Xe nuclei are introduced. The methods involve optimum use of the perishable hyperpolarized magnetization of 129Xe. The necessary theoretical framework for the methods is developed, and then the methods are applied to measure the longitudinal relaxation constant, T1, and the self-diffusion constant, D, of hyperpolarized 129Xe. In a cell containing natural abundance 129Xe at 790 Torr, the T1 value was determined to be 155 +/- 5 min at 20 degrees C and at 2.0 T field. For a second cell at 896 Torr, at the same field and temperature, the T1 value was determined to be 66 +/- 2 min. At a higher field of 7.05 T, the T1 values for the two cells were found to be 185 +/- 10 and 88 +/- 5 min, respectively. The 129Xe self-diffusion constant for the first cell was measured to be 0.057 cm2/ s and for the second cell it was 0.044 cm2/s. The methods were applied to 129Xe in the gas phase, in vitro; however, they are, in principle, applicable for in vivo or ex vivo studies. The potential role of these methods in the development of newly emerging hyper-polarized 129Xe MRI applications is discussed.