Structure and reactivity of surface oxides on Pt(110) during catalytic CO oxidation

Reversible Ultrathin PtOx Formation at the Buried Pt/YSZ(111) Interface Studied In Situ under Electrochemical Polarization

Three different platinum oxides are observed by in situ X-ray diffraction during electrochemical potential cycles of platinum thin film model electrodes on yttria-stabilized zirconia (YSZ) at a temperature of 702 K in air. Scanning electron microscopy and atomic force microscopy performed before and after the in situ electrochemical X-ray experiments indicate that approximately 20% of the platinum electrode has locally delaminated from the substrate by forming pyramidlike blisters. The oxides and their locations are identified as (1) an ultrathin PtO_x at the buried Pt/YSZ interface, which forms reversibly upon anodic polarization; (2) polycrystalline β-PtO₂, which forms irreversibly upon anodic polarization on the inside of the blisters; and (3) an ultrathin α-PtO₂ at the Pt/air interface, which forms by thermal oxidation and which does not depend on the electrochemical polarization. Thermodynamic and kinetic aspects are discussed to explain the coexistence of multiple phases at the same electrochemical conditions.

Pt nanoparticles under oxidizing conditions - implications of particle size, adsorption sites and oxygen coverage on stability

Platinum nanoparticles are efficient catalysts for different reactions, such as oxidation of carbon and nitrogen monoxides. Adsorption and interaction of oxygen with the nanoparticle surface, taking place under reaction conditions, determine not only the catalytic efficiency but also the stability of the nanoparticles against oxidation. In this study, platinum nanoparticles in oxygen environment are investigated by systematic screening of initial nanoparticle-oxygen configurations and employing density functional theory and a thermodynamics-based approach. The structures formed at low oxygen coverages are described by adsorption of atomic oxygen on the nanoparticles whereas at high coverages oxide-like species are formed. The relative stability of adsorption configurations at different oxygen coverages, including the phase of fully oxidized nanoparticles, is investigated by constructing p-T phase diagrams for the studied systems.

Emerging single-atom iron catalysts for advanced catalytic systems

Due to the elusive structure-function relationship, traditional nanocatalysts always yield limited catalytic activity and selectivity, making them practically difficult to replace natural enzymes in wide industrial and biomedical applications. Accordingly, single-atom catalysts (SACs), defined as catalysts containing atomically dispersed active sites on a support material, strikingly show the highest atomic utilization and drastically boosted catalytic performances to functionally mimic or even outperform natural enzymes. The molecular characteristics of SACs (e.g., unique metal-support interactions and precisely located metal sites), especially single-atom iron catalysts (Fe-SACs) that have a similar catalytic structure to the catalytically active center of metalloprotease, enable the accurate identification of active centers in catalytic reactions, which afford ample opportunity for unraveling the structure-function relationship of Fe-SACs. In this review, we present an overview of the recent advances of support materials for anchoring an atomic dispersion of Fe. Subsequently, we highlight the structural designability of support materials as two sides of the same coin. Moreover, the applications described herein illustrate the utility of Fe-SACs in a broad scope of industrially and biologically important reactions. Finally, we present an outlook of the major challenges and opportunities remaining for the successful combination of single Fe atoms and catalysts.

Structure Matters: Asymmetric CO Oxidation at Rh Steps with Different Atomic Packing

Curved crystals are a simple but powerful approach to bridge the gap between single crystal surfaces and nanoparticle catalysts, by allowing a rational assessment of the role of active step sites in gas-surface reactions. Using a curved Rh(111) crystal, here, we investigate the effect of A-type (square geometry) and B-type (triangular geometry) atomic packing of steps on the catalytic CO oxidation on Rh at millibar pressures. Imaging the crystal during reaction ignition with laser-induced CO₂ fluorescence demonstrates a two-step process, where B-steps ignite at lower temperature than A-steps. Such fundamental dissimilarity is explained in ambient pressure X-ray photoemission (AP-XPS) experiments, which reveal partial CO desorption and oxygen buildup only at B-steps. AP-XPS also proves that A-B step asymmetries extend to the active stage: at A-steps, low-active O–Rh–O trilayers buildup immediately after ignition, while highly active chemisorbed O is the dominant species on B-type steps. We conclude that B-steps are more efficient than A-steps for the CO oxidation.

First-principles study on CO oxidation on CuO(111) surface prefers the Eley-Rideal or Langmuir-Hinshelwood pathway

Using the first-principles approach, we investigated the electronic and chemical properties of cupric oxide CuO (110) and CuO (111) and substantiated their catalytic activity toward CO oxidation. It is found that CuO (111) surface is more stable than the CuO (110) surface. We firstly study that adsorption of CO and O₂on perfect, oxygen vacancies and Cu-anchored CuO (111) surface. It is found that adsorption of CO and O₂molecules are chemical. Then we selected the most stable adsorption structure of CO/O₂to investigated the CO oxidation mechanism on different surface, here we choose to study the Langmuir-Hinshelwood (LH) mechanism and Eley-Rideal (ER) mechanism. The results show that perfect and O_vacancyCuO (111) surface is more inclined to LH mechanism, while the Cu-anchored CuO (111) surface is more inclined to ER mechanism. The results show that CuO catalyst is very effective for CO oxidation. Our work provides a deep understanding for the search of economical and reasonable CO oxidation catalysts.

Investigation of Active Catalysts at Work

Even after being in business for at least the last 100 years, research into the field of (heterogeneous) catalysis is still vibrant, both in academia and in industry. One of the reasons for this is that around 90% of all chemicals and materials used in everyday life are produced employing catalysis. In 2020, the global catalyst market size reached $35 billion, and it is still steadily increasing every year. Additionally, catalysts will be the driving force behind the transition toward sustainable energy. However, even after having been investigated for 100 years, we still have not reached the holy grail of developing catalysts from rational design instead of from trial-and-error. There are two main reasons for this, indicated by the two so-called "gaps" between (academic) research and actual catalysis. The first one is the "pressure gap", indicating the 13 orders of magnitude difference in pressure between the ultrahigh vacuum lab conditions and the atmospheric pressures (and higher) of industrial catalysis. The second one is the "materials gap", indicating the difference in complexity between single-crystal model catalysts of academic research and the real catalysts, consisting of metallic nanoparticles on supports, promoters, fillers, and binders. Although over the past decades significant efforts have been made in closing these gaps, many steps still have to be taken. In this Account, I will discuss the steps we have taken at Leiden University to further our fundamental understanding of heterogeneous catalysis at the (near-)atomic scale. I will focus on bridging the pressure gap, though we are also working on closing the materials gap. Over the past years, we developed state-of-the-art equipment that is able to investigate the (near-)atomic-scale structure of the catalyst surface during the chemical reaction using several surface-science-based techniques such as scanning tunneling microscopy, atomic force microscopy, optical microscopy, and X-ray-based techniques (surface X-ray diffraction, grazing-incidence small-angle X-ray scattering, and X-ray reflectivity, in collaboration with ESRF). Simultaneously with imaging the surface, we can investigate the catalyst's performance via mass spectrometry, enabling us to link changes in the catalyst structure to its activity, selectivity, or stability. Although we are currently investigating many industrially relevant catalytic systems, I will here focus the discussion on the oxidation of platinum during, for example, CO and NO oxidation, the NO reduction reaction on platinum, and the growth of graphene on liquid (molten) copper. I will show that to be able to obtain the full picture of heterogeneous catalysis, the ability to investigate the catalyst at the (near-)atomic scale during the chemical reaction is a must.

Gas Pulse-X-Ray Probe Ambient Pressure Photoelectron Spectroscopy with Submillisecond Time Resolution

A setup capable of conducting gas pulse-X-ray probe ambient pressure photoelectron spectroscopy with high time resolution is presented. The setup makes use of a fast valve that creates gas pulses with an internal pressure in the mbar range and a rising edge of few hundreds of microseconds. A gated detector based on a fast camera is synchronized with the valve operation to measure X-ray photoemission spectra with up to 20 μs time resolution. The setup is characterized in several experiments in which the N2 gas is pulsed either into vacuum or a constant flow of another gas. The observed width of the pulse rising edge is 80 μs, and the maximum internal pulse pressure is ∼1 mbar. The CO oxidation reaction over Pt (111) was used to demonstrate the capability of the setup to correlate the gas phase composition with that of the surface during transient supply of CO gas into an O2 stream. Thus, formation of both chemisorbed and oxide oxygen species was observed prior to CO gas perturbation. Also, the data indicated that both the Langmuir-Hinshelwood and Mars-van-Krevelen mechanisms play an important role in the oxidation of carbon monoxide under ambient conditions.

CO oxidation over defective and nonmetal doped MoS2monolayers

Defective (missing S atoms) and nonmetal (C- and N-) doped MoS₂monolayers in the 2H and 1T' phases have been evaluated for catalyzing CO oxidation based on first-principles calculations. For the reaction 2CO + O₂→ 2CO₂, the oxidization of the first CO molecule is fairly easy and sometimes is even spontaneous, as the O₂ molecule is highly activated or dissociates upon adsorption. However, for the defective (2H-), C-doped (1T'-), and N-doped (2H- and 1T'-) MoS₂monolayers, the remaining O^*adatom often refuses to react with other CO molecules and is hard to be removed (barrier > 1.20 eV). Only when over the C-doped 2H- and defective 1T'-MoS₂monolayers, the removal of the second O^*adatom requires to overcome moderate barriers (0.74 and 0.88 eV, respectively) by reacting with another CO molecule via the Eley-Rideal mechanism and the catalysts are recovered. The barriers can be further reduced by applying either tensile or compressive strain to the MoS₂nanosheet. In contrast, the Langmuir-Hinshelwood mechanism is followed over the metal-containing MoS₂nanosheets, as the bigger size of metal dopants allow the co-adsorption of CO and O₂. Therefore, the C-doped 2H- and defective 1T'-MoS₂monolayers are promising nonmetal-doped catalysts for CO oxidation.

Shedding Light on CO Oxidation Surface Chemistry on Single Pt Catalyst Nanoparticles Inside a Nanofluidic Model Pore

Investigating a catalyst under relevant application conditions is experimentally challenging and parameters like reaction conditions in terms of temperature, pressure, and reactant mixing ratios, as well as catalyst design, may significantly impact the obtained experimental results. For Pt catalysts widely used for the oxidation of carbon monoxide, there is keen debate on the oxidation state of the surface at high temperatures and at/above atmospheric pressure, as well as on the most active surface state under these conditions. Here, we employ a nanoreactor in combination with single-particle plasmonic nanospectroscopy to investigate individual Pt catalyst nanoparticles localized inside a nanofluidic model pore during carbon monoxide oxidation at 2 bar in the 450-550 K temperature range. As a main finding, we demonstrate that our single-particle measurements effectively resolve a kinetic phase transition during the reaction and that each individual particle has a unique response. Based on spatially resolved measurements, we furthermore observe how reactant concentration gradients formed due to conversion inside the model pore give rise to position-dependent kinetic phase transitions of the individual particles. Finally, employing extensive electrodynamics simulations, we unravel the surface chemistry of the individual Pt nanoparticles as a function of reactant composition and find strongly temperature-dependent Pt-oxide formation and oxygen spillover to the SiO2 support as the main processes. These results therefore support the existence of a Pt surface oxide in the regime of high catalyst activity and demonstrate the possibility to use plasmonic nanospectroscopy in combination with nanofluidics as a tool for in situ studies of individual catalyst particles.

High-Pressure Scanning Tunneling Microscopy

This is a Review of recent studies on surface structures of crystalline materials in the presence of gases in the mTorr to atmospheric pressure range, which brings surface science into a brand new direction. Surface structure is not only a property of the material but also depends on the environment surrounding it. This Review emphasizes that high/ambient pressure goes hand-in-hand with ambient temperature, because weakly interacting species can be densely covering surfaces at room temperature only when in equilibrium with a sufficiently high gas pressure. At the same time, ambient temperatures help overcome activation barriers that impede diffusion and reactions. Even species with weak binding energy can have residence lifetimes on the surface that allow them to trigger reconstructions of the atomic structure. The consequences of this are far from trivial because under ambient conditions the structure of the surface dynamically adapts to its environment and as a result completely new structures are often formed. This new era of surface science emerged and spread rapidly after the retooling of characterization techniques that happened in the last two decades. This Review is focused on the new surface structures enabled particularly by one of the new tools: high-pressure scanning tunneling microscopy. We will cover several important surfaces that have been intensely scrutinized, including transition metals, oxides, and alloys.

Novel joint catalytic properties of Fe and N co-doped graphene for CO oxidation

Using density functional theory, we have performed detailed calculations of the joint catalytic activity of graphene co-doped with Fe and N atoms. The Fe atom can be located on single vacancy graphene and acts as the active site. Due to the strong attraction of the Fe ion, the O-O bond length of the O2 molecule is elongated, which decreases the bonding energy between the O atoms. The energy barrier of CO oxidization is 0.84 eV. When N atoms are doped into the graphene, the interactions between the Fe ions and O2 molecules are stronger, and the O-O bond lengths are elongated further, which makes the desorption of the quasi-CO2 molecule easier. The energy barriers are reduced to 0.62 eV, 0.49 eV, and 0.33 eV for graphene doped with one, two and three N atoms, respectively. The O atom remaining on the Fe ion can form a CO2 molecule with an additional CO molecule. The produced CO2 molecule can be released with a small or even zero energy barrier by adsorbing an O2 molecule. The adsorbed O2 molecule is then involved in the next reaction process, and the material can be used as a recycled catalyst.

Catalytic Oxidation of CO on a Curved Pt(111) Surface: Simultaneous Ignition at All Facets through a Transient CO-O Complex*

The catalytic oxidation of CO on transition metals, such as Pt, is commonly viewed as a sharp transition from the CO-inhibited surface to the active metal, covered with O. However, we find that minor amounts of O are present in the CO-poisoned layer that explain why, surprisingly, CO desorbs at stepped and flat Pt crystal planes at once, regardless of the reaction conditions. Using near-ambient pressure X-ray photoemission and a curved Pt(111) crystal we probe the chemical composition at surfaces with variable step density during the CO oxidation reaction. Analysis of C and O core levels across the curved crystal reveals that, right before light-off, subsurface O builds up within (111) terraces. This is key to trigger the simultaneous ignition of the catalytic reaction at different Pt surfaces: a CO-Pt-O complex is formed that equals the CO chemisorption energy at terraces and steps, leading to the abrupt desorption of poisoning CO from all crystal facets at the same temperature.

Thermodynamics of the formation of surface PtO2 stripes on Pt(111) in the absence of subsurface oxygen

This paper examines the thermodynamics of PtO₂ stripes formed as intermediates of Pt(111) surface oxidation as a function of the degree of dilation parallel to the stripes, using density functional theory and atomistic thermodynamics. Internal energy calculations predict 7/8 and 8/9 stripe structures to dominate at standard temperature and pressure, which contain 7 or 8 elevated PtO₂ units per 8 or 9 supporting surface Pt atoms, respectively. Moreover, we found a thermodynamic optimum with respect to mean in-stripe Pt-Pt spacing close to that of α-PtO₂. Vibrational zero point energies, including bulk layer contributions, make a small but significant contribution to the stripe free energies, leading to the 6/7 stripe being most stable, although the 7/8 structure is still close in free energy. These findings correspond closely to experimental observations, providing insight into the driving force for oxide stripe formation and structure as the initial intermediate of platinum surface oxidation, and aiding our understanding of platinum catalysts and surface roughening under oxidative conditions.

Versatile Homebuilt Gas Feed and Analysis System for Operando TEM of Catalysts at Work

Understanding how catalysts work during chemical reactions is crucial when developing efficient catalytic materials. The dynamic processes involved are extremely sensitive to changes in pressure, gas environment and temperature. Hence, there is a need for spatially resolved operando techniques to investigate catalysts under working conditions and over time. The use of dedicated operando techniques with added detection of catalytic conversion presents a unique opportunity to study the mechanisms underlying the catalytic reactions systematically. Herein, we report on the detailed setup and technical capabilities of a modular, homebuilt gas feed system directly coupled to a quadrupole mass spectrometer, which allows for operando transmission electron microscopy (TEM) studies of heterogeneous catalysts. The setup is compatible with conventional, commercially available gas cell TEM holders, making it widely accessible and reproducible by the community. In addition, the operando functionality of the setup was tested using CO oxidation over Pt nanoparticles.

Single-atom metal-modified graphenylene as a high-activity catalyst for CO and NO oxidation

Herein, the adsorption behaviors and interactions of different gas species on single-metal atom-anchored graphenylene (M–graphenylene, M = Mn, Co, Ni, and Cu) sheets were investigated by first-principles calculations.

Interaction of carbon monoxide with doped metal clusters

Highlight of experimental and computational studies about the interaction of CO with transition and coinage metal clusters, particularly discussing the influence of dopant atoms.

Catalytic oxidation mechanisms of carbon monoxide over single- and double-vacancy Mn-embedded graphene

CO oxidation on MnC₃ and MnC₄ has fast kinetics and a low energy barrier.

Evidence of the O–Pd–O and Pd–O4 structure units as oxide seeds and their origin on Pd(211): revealing the mechanism of surface oxide formation

The formation of surface oxides on metal surfaces is not only important in materials science, but also of significance in heterogeneous catalysis due to the fact that during most oxidation reactions the metal catalysts are inevitably oxidized, which may cause dramatic consequences in the reactions.

In situ structural evolution of single particle model catalysts under ambient pressure reaction conditions

The catalytic activity of metal nanoparticles can be altered by applying strain, which changes the crystalline lattice spacing and modifies the electronic properties of the metal. Understanding the role of elastic strain during catalytic reactions is thus crucial for catalyst design. Here, we show how single highly faceted Pt nanoparticles expand or contract upon interaction with different gas atmospheres using in situ nano-focused coherent X-ray diffraction imaging. We also demonstrate inter-particle heterogeneities, as they differ in development of strain under CO oxidation reaction conditions. The reported observations offer new insights into the design of catalysts exploiting strain effects.

Combining synchrotron light with laser technology in catalysis research

High-energy surface X-ray diffraction (HESXRD) provides surface structural information with high temporal resolution, facilitating the understanding of the surface dynamics and structure of the active phase of catalytic surfaces. The surface structure detected during the reaction is sensitive to the composition of the gas phase close to the catalyst surface, and the catalytic activity of the sample itself may affect the surface structure, which in turn may complicate the assignment of the active phase. For this reason, planar laser-induced fluorescence (PLIF) and HESXRD have been combined during the oxidation of CO over a Pd(100) crystal. PLIF complements the structural studies with an instantaneous two-dimensional image of the CO2 gas phase in the vicinity of the active model catalyst. Here the combined HESXRD and PLIF operando measurements of CO oxidation over Pd(100) are presented, allowing for an improved assignment of the correlation between sample structure and the CO2 distribution above the sample surface with sub-second time resolution.

Tuning the adsorption and interaction of CO and O2 on graphene-like BC3-supported non-noble metal atoms

Research into suitable substrate-supported single-atom catalysts has become a major challenge for electrochemical sensors and energy devices. Firstly, we investigate the adsorption properties of metal atoms (MA = Fe, Co, Ni, Cu and Al) on pristine and defective BC3 sheets through using first-principles calculations. It is found that the MA-doped BC3 configurations (MA-BC3) are quite stable at high temperature and the positively charged MAs as surface active sites can effectively regulate the stability of reactive gases. Secondly, the adsorption of individual O2 molecules is more stable than that of CO molecules, which can modify the electronic and magnetic properties of MA-BC3 systems. Moreover, the possible reaction processes of CO oxidation on the Fe-BC3 substrate are comparably analyzed through the Eley-Rideal (ER) and Langmuir-Hinshelwood (LH) mechanisms. In the LH mechanism, the coadsorbed O2 and CO as starting materials start to form an OOCO complex with a smaller energy barrier (0.38 eV), which is an energetically more favorable process than that of the OOCO (0.65 eV) or CO3 complex (0.42 eV) formed through ER mechanisms. This result indicates that the functionalized MA-BC3 sheets have low cost and high activity.

A Linear Scaling Relation for CO Oxidation on CeO2-Supported Pd

Resolving the structure and composition of supported nanoparticles under reaction conditions remains a challenge in heterogeneous catalysis. Advanced configurational sampling methods at the density functional theory level are used to identify stable structures of a Pd8 cluster on ceria (CeO2) in the absence and presence of O2. A Monte Carlo method in the Gibbs ensemble predicts Pd-oxide particles to be stable on CeO2 during CO oxidation. Computed potential energy diagrams for CO oxidation reaction cycles are used as input for microkinetics simulations. Pd-oxide exhibits a much higher CO oxidation activity than metallic Pd on CeO2. This work presents for the first time a scaling relation for a CeO2-supported metal nanoparticle catalyst in CO oxidation: a higher oxidation degree of the Pd cluster weakens CO binding and facilitates the rate-determining CO oxidation step with a ceria O atom. Our approach provides a new strategy to model supported nanoparticle catalysts.

Identification of a Catalytically Highly Active Surface Phase for CO Oxidation over PtRh Nanoparticles under Operando Reaction Conditions

Pt-Rh alloy nanoparticles on oxide supports are widely employed in heterogeneous catalysis with applications ranging from automotive exhaust control to energy conversion. To improve catalyst performance, an atomic-scale correlation of the nanoparticle surface structure with its catalytic activity under industrially relevant operando conditions is essential. Here, we present x-ray diffraction data sensitive to the nanoparticle surface structure combined with in situ mass spectrometry during near ambient pressure CO oxidation. We identify the formation of ultrathin surface oxides by detecting x-ray diffraction signals from particular nanoparticle facets and correlate their evolution with the sample's enhanced catalytic activity. Our approach opens the door for an in-depth characterization of well-defined, oxide-supported nanoparticle based catalysts under operando conditions with unprecedented atomic-scale resolution.

Metastable Structures in Cluster Catalysis from First-Principles: Structural Ensemble in Reaction Conditions and Metastability Triggered Reactivity

Reactivity studies on catalytic transition metal clusters are usually performed on a single global minimum structure. With the example of a Pt₁₃ cluster under a pressure of hydrogen, we show from first-principle calculations that low energy metastable structures of the cluster can play a major role for catalytic reactivity and that hence consideration of the global minimum structure alone can severely underestimate the activity. The catalyst is fluxional with an ensemble of metastable structures energetically accessible at reaction conditions. A modified genetic algorithm is proposed to comprehensively search for the low energy metastable ensemble (LEME) structures instead of merely the global minimum structure. In order to reduce the computational cost of density functional calculations, a high dimensional neural network potential is employed to accelerate the exploration. The presence and influence of LEME structures during catalysis is discussed by the example of H covered Pt₁₃ clusters for two reactions of major importance: hydrogen evolution reaction and methane activation. The results demonstrate that although the number of accessible metastable structures is reduced under reaction condition for Pt₁₃ clusters, these metastable structures can exhibit high activity and dominate the observed activity due to their unique electronic or structural properties. This underlines the necessity of thoroughly exploring the LEME structures in catalysis simulations. The approach enables one to systematically address the impact of isomers in catalysis studies, taking into account the high adsorbate coverage induced by reaction conditions.

Insights into the electronic properties and reactivity of graphene-like BC3 supported metal catalysts

Graphene-like BC₃ monolayer is a new two-dimensional nanomaterial with many unique properties, but is still largely unknown.

Confinement boosts CO oxidation on an Ni atom embedded inside boron nitride nanotubes

Because of the confinement effect, Ni embedded on the interior surface of BNNT exhibits a much higher catalytic activity for CO oxidation by comparing with that embedded in h-BN or on the outside surface of BNNT.

A computational study of CO oxidation reactions on metal impurities in graphene divacancies

Based on the density functional theory calculations, the formation geometry, electronic properties, and catalytic activity of metal impurities in divacancy graphene (M-DG, M = Mo, Fe, Co, and Ni) were systematically investigated.

Non-metal atom anchored BC3 sheet: a promising low-cost and high-activity catalyst for CO oxidation

Graphene-like BC₃ monolayer as a new semiconducting nanomaterial has many unique properties.

Chemical states of surface oxygen during CO oxidation on Pt(1 1 0) surface revealed by ambient pressure XPS

The study of CO oxidation on Pt(1 1 0) surface is revisited using ambient pressure x-ray photoemission spectroscopy. When the surface temperature reaches the activation temperature for CO oxidation under elevated pressure conditions, both the α-phase of PtO₂ oxide and chemisorbed oxygen are formed simultaneously on the surface. Due to the exothermic nature of CO oxidation, the temperature of the Pt surface increases as CO oxidation takes place. As the CO/O₂ ratio increases, the production of CO₂ increases continuously and the surface temperature also increases. Interestingly, within the diffusion limited regions, the amount of surface oxide changes little while the chemisorbed oxygen is reduced.