New soft X-ray beamline BL07LSU at SPring-8

Macroscopic Structural Transition of Nickel Dithiolate Capsule with Uniaxial Magnetic Anisotropy in Water

Meeting the Internet of Things (IoT) demand for flexible organic spintronics requires dynamically flexible, "soft" organic magnetic materials. These materials should be capable of reordering their macroscopic assemblies in response to external stimuli. Unlike conventional rigid, "hard" crystalline organic paramagnets, that are typically composed of open-shell π- or d/π-conjugated planar molecules and rely on intermolecular interactions in the ordered, assembled structures, soft paramagnets necessitate a delicate balance between long-range structural order (essential for controlling magnetic properties) and dynamic flexibility a challenge previously unmet for open-shell planar molecules. In this study, an amphiphilic d/π-conjugated nickel dithiolate radical anion salt is presented that self-assembles into ordered membranes, forming capsule-like macrostructures with exceptional stability in aqueous environments. This design achieves the desired balance. These assemblies exhibit uniaxial magnetic anisotropy driven by significant spin-spin interactions and undergo temperature-dependent macroscopic structural transitions representing, to the knowledge, the first observation of such behavior for assemblies of open-shell planar molecules. This well-defined, single-molecular-weight system provides critical structural and mechanism insights for soft matter design and a versatile platform for spintronic applications. The findings advance the development of flexible, tunable molecular soft paramagnets, expanding their potential for innovative applications in flexible devices and beyond.

Elucidation of the Co4+ state with strong charge-transfer effects in charged LiCoO2 by resonant soft X-ray emission spectroscopy at the Co L3 edge

To understand the electronic-structure change of LiCoO2, a widely used cathode material in Li-ion batteries, during charge-discharge, we performed ex situ soft X-ray absorption spectroscopy (XAS) and resonant soft X-ray emission spectroscopy (RXES) of the Co L3 edge in combination with charge-transfer multiplet calculations. The RXES profile significantly changed for the charged state at 4.2 V vs. Li/Li+, corresponding to the oxidation reaction from a Co3+ low-spin state for the initial state, while the XAS profile exhibited small changes. For the 4.2-V charged state, we confirmed that approximately half of the initial Co3+ ions were oxidized to Co4+ ions. The multiplet calculation of the RXES results revealed that the Co4+ state has a negative charge-transfer energy and the d6L̲ state (L̲ is a ligand hole) is the most stable. Therefore, the O 2p hole created by the strong charge-transfer effect plays a major role in the redox reaction of LiCoO2.

Effects of hydration water on bioresponsiveness of polymer interfaces revealed by analysis of linear and cyclic polymer-grafted substrates

Given that the hydration water of polymer matrices may differ from that of outermost polymer surfaces, processes at biomaterial-biofluid interfaces and role of hydration water therein cannot be adequately examined using most conventional characterization methods. To bridge this gap, a gold substrate was herein modified with linear and cyclic poly(2-methoxyethyl acrylate) to prepare gl-PMEA and gc-PMEA surfaces, respectively, as models for the outermost surfaces of blood-contacting medical devices. Both surfaces suppressed the adhesion of human platelets but differed in the adhesion behaviors of normal and tumor cells despite having the same areal density of fixed-end units. The surfaces were analyzed using quartz crystal microbalance (QCM), frequency modulation atomic force microscopy (FM-AFM), and X-ray emission spectroscopy (XES) measurements under wet conditions to clarify the relationship between bioresponsivity and hydration water. QCM measurements provided evidence that both grafted-PMEA were hydrated. FM-AFM observations revealed that the swelling layer was thicker for gc-PMEA. To rationalize the differences in the surface hydration states, we performed XES measurements under conditions enabling control over the number of hydration water molecules. In the low-water-content region, hydrogen bonds or interactions between water molecules developed in the vicinity of gl-PMEA but not gc-PMEA. Thus, the initial hydration behavior of the gc-PMEA surface, which promoted intermediate water formation, was different from that of the gl-PMEA surface. The results suggested that the adjustment and optimization of the hydration state of outermost biomaterial surfaces enable the control of bioresponsivity, including the selective isolation of tumor cells.

The role of carboxylate ligand orbitals in the breathing dynamics of a metal-organic framework by resonant X-ray emission spectroscopy

Metal-organic frameworks (MOFs) exhibit structural flexibility induced by temperature and guest adsorption, as demonstrated in the structural breathing transition in certain MOFs between narrow-pore and large-pore phases. Soft modes were suggested to entropically drive such pore breathing through enhanced vibrational dynamics at high temperatures. In this work, oxygen K-edge resonant X-ray emission spectroscopy of the MIL-53(Al) MOF was performed to selectively probe the electronic perturbation accompanying pore breathing dynamics at the ligand carboxylate site for metal-ligand interaction. It was observed that the temperature-induced vibrational dynamics involves switching occupancy between antisymmetric and symmetric configurations of the carboxylate oxygen lone pair orbitals, through which electron density around carboxylate oxygen sites is redistributed and metal-ligand interactions are tuned. In turn, water adsorption involves an additional perturbation of π orbitals not observed in the structural change solely induced by temperature.

Angle-resolved X-ray emission spectroscopy facility realized by an innovative spectrometer rotation mechanism at SPring-8 BL07LSU

The X-ray emission spectrometer at SPring-8 BL07LSU has recently been upgraded with advanced modifications that enable the rotation of the spectrometer with respect to the scattering angle. This major upgrade allows the scattering angle to be flexibly changed within the range of 45-135°, which considerably simplifies the measurement of angle-resolved X-ray emission spectroscopy. To accomplish the rotation system, a sophisticated sample chamber and a highly precise spectrometer rotation mechanism have been developed. The sample chamber has a specially designed combination of three rotary stages that can smoothly move the connection flange along the wide scattering angle without breaking the vacuum. In addition, the spectrometer is rotated by sliding on a flat metal surface, ensuring exceptionally high accuracy in rotation and eliminating the need for any further adjustments during rotation. A control system that integrates the sample chamber and rotation mechanism to automate the measurement of angle-resolved X-ray emission spectroscopy has also been developed. This automation substantially streamlines the process of measuring angle-resolved spectra, making it far easier than ever before. Furthermore, the upgraded X-ray emission spectrometer can now also be utilized in diffraction experiments, providing even greater versatility to our research capabilities.

Hydrogen-induced Sulfur Vacancies on the MoS2 Basal Plane Studied by Ambient Pressure XPS and DFT Calculations

Sulfur vacancy on an MoS2 basal plane plays a crucial role in device performance and catalytic activity; thus, an understanding of the electronic states of sulfur vacancies is still an important issue. We investigate the electronic states on an MoS2 basal plane by ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) and density functional theory calculations while heating the system in hydrogen. The AP-XPS results show a decrease in the intensity ratio of S 2p to Mo 3d, indicating that sulfur vacancies are formed. Furthermore, low-energy components are observed in Mo 3d and S 2p spectra. To understand the changes in the electronic states induced by sulfur vacancy formation at the atomic scale, we calculate the core-level binding energies for the model vacancy surfaces. The calculated shifts for Mo 3d and S 2p with the formation of sulfur vacancy are consistent with the experimentally observed binding energy shifts. Mulliken charge analysis indicates that this is caused by an increase in the electronic density associated with the Mo and S atoms around the sulfur vacancy as compared to the pristine surface. The present investigation provides a guideline for sulfur vacancy engineering.

Molecular Chirality and Its Monitoring by Ultrafast X-ray Pulses

Major advances in X-ray sources including the development of circularly polarized and orbital angular momentum pulses make it possible to probe matter chirality at unprecedented energy regimes and with Ångström and femtosecond spatiotemporal resolutions. We survey the theory of stationary and time-resolved nonlinear chiral measurements that can be carried out in the X-ray regime using tabletop X-ray sources or large scale (XFEL, synchrotron) facilities. A variety of possible signals and their information content are discussed.

Surface Exchange Reaction of Mixed Conductive La0.65Ca0.35FeO3-δ during Oxygen Evolution and Incorporation as Traced by Operando X-ray Photoelectron Spectroscopy

High oxygen permeability of mixed conductive La_0.65Ca_0.35FeO_3-δ (LCF) is applicable to pure oxygen gas generators and cathodes for solid oxide fuel cells, etc.; however, lower surface exchange reactions at temperatures below 800 °C reduce permeability. To understand the microscopic surface reaction mechanism, operando soft X-ray photoelectron spectroscopy of an LCF film surface was conducted during the evolution and incorporation of oxygen. LCF film was prepared on yttria-stabilized zirconia and a current was applied throughout the film at ∼600 °C. From operando X-ray photoelectron spectra, surface oxide species involved in the surface exchange reaction obviously appeared on the film during the evolution of oxygen from the surface. The number of surface oxide species abruptly decreased during incorporation of oxygen. By applying the current from a negative to positive value, the numbers of surface oxide species and ligand holes near Fe³⁺ ions on the surface both significantly increased. The results infer that ligand holes in the Fe 3d-O 2p hybrid orbitals correspond to active reaction sites at which surface oxide species change to oxygen molecules. Increasing the number of active reaction sites is key to improving oxygen evolution of mixed conductive oxides.

Soft X-ray ptychography system using a Wolter mirror for achromatic illumination optics

A soft X-ray ptychography system using a Wolter mirror for the illumination optics has been developed. By taking advantage of the achromaticity of the optics, the system is capable of seamlessly imaging at half-period resolution of 50 nm with a broad photon-energy range from 250 eV to 2 keV while maintaining the focal position. Imaging a mammalian cell at various wavelengths was demonstrated, and high-resolution visualization of organelle was achieved. Stereo imaging was also performed with a long working distance of 20 mm. In combination with in-situ/operando and tomographic measurements, this system will be a powerful tool for observing biological and material targets with complex features.

Critical In-Plane Density of Polyelectrolyte Brush for the Ordered Hydrogen-Bonded Structure of Incorporated Water

A polymer electrolyte brush is a reasonable platform to confine water molecules within a nanoscopic area to study their role in the function of interacting media because of their adjustable nanospace and charge by changing the in-plane density and side chains of the brush. Here, we demonstrate how the in-plane spacing of cationic polymer brush chains, poly[2-(methacryloyloxy)ethyltrimethylammonium chloride] (PMTAC), affects the hydrogen bond configuration of incorporated water using soft X-ray emission spectroscopy. At the critical in-plane density σ = 0.30 chains/nm² of PMTAC, tetrahedrally coordinated water molecules started to melt into distorted or broken hydrogen-bonded configurations. Considering the charge on the quaternary ammonium cations, the electric field required to form a tetrahedrally coordinated hydrogen-bonded configuration was estimated as ∼500 kV cm^-1 and is effective up to ∼1 nm from the surface of the polymer chain. These findings are useful for designing specific interface properties and the resultant surface function of polyelectrolyte-based materials.

Identification of Valence Electronic States Reflecting the Hydrogen Bonding in Liquid Ethanol

The temperature-dependent X-ray emission spectra of liquid ethanol were calculated theoretically using a semi-classical approximation to the Kramers-Heisenberg formula, which includes the dynamical effects induced by a core-hole. Soft X-ray emission spectroscopic measurements were performed to discern the changes in the hydrogen bonding (h-bonding) structure of liquid ethanol using a temperature-controlled liquid cell at 241 and 313 K. The relative intensities of the peaks at approximately 526.5 and 527.1 eV varied with temperature, and the corresponding behavior was reproduced theoretically, although the variation with temperature in the calculated spectra were more enhanced than that in the experiment. The two peaks can be attributed to the 3a″ + 10a' mixed state and pure 3a″ state, respectively, depending on the behavior of the local h-bonding structure. The splitting of the 3a″ component occurred because of the h-bonding behavior of liquid ethanol. Furthermore, the size of the ethanol cluster decreased with an increase in temperature, mainly due to the breaking of the one-donor/one-acceptor type h-bonding. Our studies suggest that the electronic state of liquid ethanol reflects several types of h-bonding structures, and the ratios of these h-bonding types vary with temperature.

Hydration Mechanism in Blood-Compatible Polymers Undergoing Phase Separation

Interactions involving intermediate water are crucial for the design of novel blood-compatible materials. Herein, we use a combination of atomic force microscopy, quartz crystal microbalance measurements, and soft X-ray emission spectroscopy to investigate the local hydrogen-bonded configuration of water on blood-compatible poly(2-methoxyethyl acrylate) and non-blood-compatible poly(n-butyl acrylate) grafted on a gold substrate. We find that the initially incorporated water induces polymer-dependent phase separation, facilitating further water uptake. For the blood-compatible polymer, tetrahedrally coordinated water coexists with water adsorbed on C═O groups in low-density regions of the grafted polymer surface, providing a scaffold for the formation of intermediate water. The amount of intermediate water is determined by the type of functional groups, local polymer configuration, and polymer morphology. Thus, blood compatibility is governed by the complex water/polymer interactions.

Hydrogen-Bonded Structure of Water in the Loop of Anchored Polyrotaxane Chain Controlled by Anchoring Density

Hydrogen-bonded network of water surrounding polymers is expected to be one of the most relevant factors affecting biocompatibility, while the specific hydrogen-bonded structure of water responsible for biocompatibility is still under debate. Here we study the hydrogen-bonded structure of water in a loop-shaped poly(ethylene glycol) chain in a polyrotaxane using synchrotron soft X-ray emission spectroscopy. By changing the density of anchoring molecules, hydrogen-bonded structure of water confined in the poly(ethylene glycol) loop was identified. The XES profile of the confined water indicates the absence of the low energy lone-pair peak, probably because the limited space of the polymer loop entropically inhibits the formation of tetrahedrally coordinated water. The volume of the confined water can be changed by the anchoring density, which implies the ability to control the biocompatibility of loop-shaped polymers.

Soft X-ray Emission Studies on Hydrate-Melt Electrolytes

Highly salt-concentrated aqueous solutions are a new class of electrolytes, which provide a wide potential window exceeding 3 V and, hence, realize possibly inexpensive, safe, and high-energy-density storage devices. Herein, we investigate the evolution of the coordination structure and electronic state depending on the salt concentration through soft X-ray emission spectroscopy and first-principles molecular dynamics calculations. Close to the concentration limit, categorized as a "hydrate melt," a long-range hydrogen-bond network of water molecules disappears with emerging localized electronic states that resemble those in the gas phase. Such localized electronic states are attributed not only to their geometrically isolated nature but also to their dominant electrostatic interaction with Li⁺ cations. Therefore, the electrical properties of water in the hydrate melt can be more gaslike than liquidlike.

Detecting halfmetallic electronic structures of spintronic materials in a magnetic field

Band-gap engineering is one of the fundamental techniques in semiconductor technology and also applicable in next generation spintronics using the spin degree of freedom. To fully utilize the spintronic materials, it is essential to optimize the spin-dependent electronic structures in the operando conditions by applying magnetic and/or electric fields. Here we present an advanced spectroscopic technique to probe the spin-polarized electronic structures by using magnetic circular dichroism (MCD) in resonant inelastic soft X-ray scattering (RIXS) under an external magnetic field. Thanks to the spin-selective dipole-allowed transitions in RIXS-MCD, we have successfully demonstrated the direct evidence of the perfectly spin-polarized electronic structures for the prototypical halfmetallic Heusller alloy \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\hbox {Co}_2\hbox {MnSi}$$\end{document}Co2MnSi. RIXS-MCD is a promising tool to probe the spin-dependent carriers and band-gap induced in the buried magnetic layers in an element specific way under the operando conditions.

Soft X-ray emission spectroscopy for the electronic state of water molecules influenced by plasma-treated multi-walled carbon nanotubes

In this study, soft X-ray emission spectroscopy of an aqueous colloidal dispersion of multi-walled carbon nanotubes modified via the plasma process in an aqueous solution was performed for investigating the electronic state of water molecules on the colloidal particles. In the aqueous dispersion, reconstruction of the hydrogen-bonded network was implied by the O 1s spectral changes in the 1b1' and 1b1'' peaks. Furthermore, the O 1s spectral intensity around the 3a1 state was enhanced to an unusually broad energy range in comparison with previous studies. This unusual spectral change might be attributed to the hybridization of the electronic states of oxygen-containing functional groups on the surface of the plasma-modified multi-walled carbon nanotubes and that of the surrounding water molecules. Our observation indicates not only reconstruction of the hydrogen-bonded network in the aqueous dispersion but also a significant interaction of the electronic states between the water molecules and the plasma-modified multi-walled carbon nanotubes.

Development of the Soft X-ray AGM-AGS RIXS beamline at the Taiwan Photon Source

We report on the development of a high-resolution and highly efficient beamline for soft X-ray resonant inelastic X-ray scattering (RIXS) located at the Taiwan Photon Source. This beamline adopts an optical design that uses an active grating monochromator (AGM) and an active grating spectrometer (AGS) to implement the energy compensation principle of grating dispersion. Active gratings are utilized to diminish defocus, coma and higher-order aberrations, as well as to decrease the slope errors caused by thermal deformation and optical polishing. The AGS is mounted on a rotatable granite platform to enable momentum-resolved RIXS measurements with scattering angles over a wide range. Several high-precision instruments developed in-house for this beamline are described briefly. The best energy resolution obtained from this AGM-AGS beamline was 12.4 meV at 530 eV, achieving a resolving power of 4.2 × 104, while the bandwidth of the incident soft X-rays was kept at 0.5 eV. To demonstrate the scientific impact of high-resolution RIXS, we present an example of momentum-resolved RIXS measurements on a high-temperature superconducting cuprate, i.e. La2-xSrxCuO4. The measurements reveal the A1g buckling phonons in superconducting cuprates, opening a new opportunity to investigate the coupling between these phonons and charge-density waves.

Controlling the Orbital Alignment in Atoms Using Cross-Circularly Polarized Extreme Ultraviolet Wave Packets

We report on the use of pairs of 10-cycle extreme ultraviolet wave packets with attosecond-controlled spacing emitted by individual relativistic electrons within an electron bunch passing through a tandem undulator. Based on the temporal coherent control technique with circular polarization, we succeeded in controlling the excited state alignment in the photoexcitation of helium atoms, which we verified through the observation of oscillation in fluorescence yield depending on the attosecond-controlled delay time. Our work demonstrates the potential of undulator radiation for the generation of longitudinally coherent wave packets suitable for attosecond coherent control, an application which has hitherto been hidden in the incoherent nature of the radiation pulse emitted by a bunch of electrons.

Elucidation of Structure-Activity Correlations in a Nickel Manganese Oxide Oxygen Evolution Reaction Catalyst by Operando Ni L-Edge X-ray Absorption Spectroscopy and 2p3d Resonant Inelastic X-ray Scattering

Herein, we report the synthesis and electrochemical oxygen evolution experiments for a graphene-supported Ni₃MnO₄ catalyst. The changes that occur at the Ni active sites during the electrocatalyic oxygen evolution reaction (OER) were elucidated by a combination of operando Ni L-edge X-ray absorption spectroscopy (XAS) and Ni 2p3d resonant inelastic X-ray scattering (RIXS). These data are compared to reference measurements on NiO, β-Ni(OH)₂, β-NiOOH, and γ-NiOOH. Through this comparative analysis, we are able to show that under alkaline conditions (0.1 M KOH), the oxides of the Ni₃MnO₄ catalyst are converted to hydroxides. At the onset of catalysis (1.47 V), the β-Ni(OH)₂-like phase is oxidized and converted to a dominantly γ-NiOOH phase. The present study thus challenges the notion that the β-NiOOH phase is the active phase in OER and provides further evidence that the γ-NiOOH phase is catalytically active. The ability to use Ni L-edge XAS and 2p3d RIXS to provide a rational basis for structure-activity correlations is highlighted.

Reversible low-temperature redox activity and selective oxidation catalysis derived from the concerted activation of multiple metal species on Cr and Rh-incorporated ceria catalysts

The ceria-based catalyst incorporated with Cr and a trace amount of Rh (Cr_0.19Rh_0.06CeO_z) was prepared and the reversible redox performances and oxidation catalysis of CO and alcohol derivatives with O₂ at low temperatures (<373 K) were investigated. In situ X-ray absorption fine structure (XAFS), ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), high angle annular dark-field scanning transmission electron microscopy (HAADF-STEM)-EDS/EELS and temperature-programmed reduction/oxidation (TPR/TPO) revealed the structures and redox mechanisms of three metals in Cr_0.19Rh_0.06CeO_z: dispersed Rh^3+δ species (<1 nm) and Cr^6-γO_3-x nanoparticles (∼1 nm) supported on CeO₂ in Cr_0.19Rh_0.06CeO_z were transformed to Rh nanoclusters, Cr(OH)₃ species and CeO_2-x with two Ce³⁺-oxide layers at the surface in a concerted activation manner of the three metal species with H₂.

Spectrum adapted the expectation-maximization algorithm for high-throughput peak shift analysis

We introduce a spectrum-adapted expectation-maximization (EM) algorithm for high-throughput analysis of a large number of spectral datasets by considering the weight of the intensity corresponding to the measurement energy steps. Proposed method was applied to synthetic data in order to evaluate the performance of the analysis accuracy and calculation time. Moreover, the proposed method was performed to the spectral data collected from graphene and MoS₂ field-effect transistors devices. The calculation completed in less than 13.4 s per set and successfully detected systematic peak shifts of the C 1s in graphene and S 2p in MoS₂ peaks. This result suggests that the proposed method can support the investigation of peak shift with two advantages: (1) a large amount of data can be processed at high speed; and (2) stable and automatic calculation can be easily performed.

Measurements of ultrafast dissociation in resonant inelastic x-ray scattering of water

There has been a discussion on the interpretation of the resonant inelastic x-ray scattering (RIXS) spectra of liquid water in terms of either different structural environments or that core hole dynamics can generate well-resolved dissociative spectral components. We have used RIXS with high resolution in the OH stretch vibration energy part, at extremely high overtones going toward the continuum of full OH bond breakage, to identify the amount of dissociative contributions in the valence band RIXS spectra at different excitation energies. We observe that at low excitation energies, corresponding to population of states with strongly antibonding character, the valence band RIXS spectra have a large contribution from a well-resolved dissociative feature. Instead, at higher excitations, this spectral component diminishes and becomes a weak structure on the high-energy side of one of the spectral peaks related to the 1b₁ state from tetrahedral configurations. This result brings both interpretations to be essential for the understanding of RIXS spectra of liquid water.

Numerical analysis of brilliance and coherent photon flux of segmented undulator radiation based on statistical optics

A method based on wave optics together with electron tracking is used to analyze synchrotron radiation from a segmented undulator in a double or multi mini-β function lattice storage ring. Radiation brilliance and transverse coherence features are investigated, where the former is calculated with the Wigner distribution function and the latter is evaluated by integrating the photon flux and cross-spectral density to exhibit the coherent flux and overall degree of coherence. To be specific, radiation properties for a single undulator in a typically single mini-β function and a tandem undulator in a double mini-β_y lattice are compared in this work. As a result, both, brilliance and coherent flux can be enhanced by a second tandem undulator at the Taiwan Photon Source.

Probing the Valence Electronic Structure of Low-Spin Ferrous and Ferric Complexes Using 2p3d Resonant Inelastic X-ray Scattering (RIXS)

Understanding the detailed electronic structure of transition metal ions is essential in numerous areas of inorganic chemistry. In particular, the ability to map out the many particle d-d spectrum of a transition metal catalyst is key to understanding and predicting reactivity. However, from a practical perspective, there are often experimental limitations on the ability to determine the energetic ordering, and multiplicity of all the excited states. These limitations derive in part from parity and spin-selection rules, as well as from the limited energy range of many standard laboratory instruments. Herein, we demonstrate the ability of 2p3d resonant inelastic X-ray scattering (RIXS) to obtain detailed insights into the many particle spectrum of simple inorganic molecular iron complexes. The present study focuses on low-spin ferrous and ferric iron complexes, including [Fe^III/II(tacn)₂]^3+/2+ and [Fe^III/II(CN)₆]^3-/4-. This series thus allows us to assess the contribution of d-count and ligand donor type, by comparing the purely σ-donating tacn ligand to the π-accepting cyanide. In order to highlight the conceptual difference between RIXS and traditional optical spectroscopy, we compare first RIXS results with UV-vis and magnetic circular dichroism spectroscopy. We then highlight the ability of 2p3d RIXS to (1) separate d-d transitions from charge transfer transitions and (2) to determine the many particle d-d spectrum over a much wider energy range than is possible by optical spectroscopy. Our experimental results are correlated with semiempirical multiplet simulations and ab initio complete active space self-consistent field calculations in order to obtain detailed assignments of the excited states. These results show that Δ S = 1, and possibly Δ S = 2, transitions may be observed in 2p3d RIXS spectra. Hence, this methodology has great promise for future applications in all areas of transition metal inorganic chemistry.

Enhancement of CO2 adsorption on oxygen-functionalized epitaxial graphene surface under near-ambient conditions

The functionalization of graphene is important in practical applications of graphene, such as in catalysts. However, the experimental study of the interactions of adsorbed molecules with functionalized graphene is difficult under ambient conditions at which catalysts are operated. Here, the adsorption of CO2 on an oxygen-functionalized epitaxial graphene surface was studied under near-ambient conditions using ambient-pressure X-ray photoelectron spectroscopy (AP-XPS). The oxygen-functionalization of graphene is achieved in situ by the photo-induced dissociation of CO2 with X-rays on graphene in a CO2 gas atmosphere. The oxygen species on the graphene surface is identified as the epoxy group by XPS binding energies and thermal stability. Under near-ambient conditions of 1.6 mbar CO2 gas pressure and 175 K sample temperature, CO2 molecules are not adsorbed on the pristine graphene, but are adsorbed on the oxygen-functionalized graphene surface. The increase in the adsorption energy of CO2 on the oxygen-functionalized graphene surface is supported by first-principles calculations with the van der Waals density functional (vdW-DF) method. The adsorption of CO2 on the oxygen-functionalized graphene surface is enhanced by both the electrostatic interactions between the CO2 and the epoxy group and the vdW interactions between the CO2 and graphene. The detailed understanding of the interaction between CO2 and the oxygen-functionalized graphene surface obtained in this study may assist in developing guidelines for designing novel graphene-based catalysts.

Direct Observation of Cr3+ 3d States in Ruby: Toward Experimental Mechanistic Evidence of Metal Chemistry

The role of transition metals in chemical reactions is often derived from probing the metal 3d states. However, the relation between metal site geometry and 3d electronic states, arising from multielectronic effects, makes the spectral data interpretation and modeling of these optical excited states a challenge. Here we show, using the well-known case of red ruby, that unique insights into the density of transition metal 3d excited states can be gained with 2p3d resonant inelastic X-ray scattering (RIXS). We compare the experimental determination of the 3d excited states of Cr³⁺ impurities in Al₂O₃ with 190 meV resolution 2p3d RIXS to optical absorption spectroscopy and to simulations. Using the crystal field multiplet theory, we calculate jointly for the first time the Cr³⁺ multielectronic states, RIXS, and optical spectra based on a unique set of parameters. We demonstrate that (i) anisotropic 3d multielectronic interactions causes different scaling of Slater integrals, and (ii) a previously not observed doublet excited state exists around 3.35 eV. These results allow to discuss the influence of interferences in the RIXS intermediate state, of core–hole lifetime broadenings, and of selection rules on the RIXS intensities. Finally, our results demonstrate that using an intermediate excitation energy between L₃ and L₂ edges allows measurement of the density of 3d excited states as a fingerprint of the metal local structure. This opens up a new direction to pump-before-destroy investigations of transition metal complex structures and reaction mechanisms.

Cobalt-to-vanadium charge transfer in polyoxometalate water oxidation catalysts revealed by 2p3d resonant inelastic X-ray scattering

2p3d RIXS spectra reveal electronic structures ofCo4V2WOC, which offers insights into its enhanced catalytic activity thanCo4P2WOC.

Probing the OH Stretch in Different Local Environments in Liquid Water

We use resonant inelastic X-ray scattering (RIXS) to resolve vibrational losses corresponding to the OH stretch where the X-ray absorption process allows us to selectively probe different structural subensembles in liquid water. The results point to a unified interpretation of X-ray and vibrational spectroscopic data in line with a picture of two classes of structural environments in the liquid at ambient conditions with predominantly close-packed high-density liquid (HDL) and occasional local fluctuations into strongly tetrahedral low-density liquid (LDL).

Enhancement of the Hydrogen-Bonding Network of Water Confined in a Polyelectrolyte Brush

Water existing in the vicinity of polyelectrolytes exhibits unique structural properties, which demonstrate key roles in chemistry, biology, and geoscience. In this study, X-ray absorption and emission spectroscopy was employed to observe the local hydrogen-bonding structure of water confined in a charged polyelectrolyte brush. Even at room temperature, a majority of the water molecules confined in the polyelectrolyte brush exhibited one type of hydrogen-bonding configuration: a slightly distorted, albeit ordered, configuration. The findings from this study provide new insight in terms of the correlation between the function and local structure of water at the interface of biological materials under physiological conditions.

A compact permanent-magnet system for measuring magnetic circular dichroism in resonant inelastic soft X-ray scattering

A compact and portable magnet system for measuring magnetic dichroism in resonant inelastic soft X-ray scattering (SX-RIXS) has been developed at the beamline BL07LSU in SPring-8. A magnetic circuit composed of Nd-Fe-B permanent magnets, which realised ∼0.25 T at the center of an 11 mm gap, was rotatable around the axis perpendicular to the X-ray scattering plane. Using the system, a SX-RIXS spectrum was obtained under the application of the magnetic field at an angle parallel, nearly 45° or perpendicular to the incident X-rays. A dedicated sample stage was also designed to be as compact as possible, making it possible to perform SX-RIXS measurements at arbitrary incident angles by rotating the sample stage in the gap between the magnetic poles. This system enables facile studies of magnetic dichroism in SX-RIXS for various experimental geometries of the sample and the magnetic field. A brief demonstration of the application is presented.

Interface electronic structure at the topological insulator-ferrimagnetic insulator junction

An interface electron state at the junction between a three-dimensional topological insulator film, Bi₂Se₃, and a ferrimagnetic insulator film, Y₃Fe₅O₁₂ (YIG), was investigated by measurements of angle-resolved photoelectron spectroscopy and x-ray absorption magnetic circular dichroism. The surface state of the Bi₂Se₃ film was directly observed and localized 3d spin states of the Fe³⁺ in the YIG film were confirmed. The proximity effect is likely described in terms of the exchange interaction between the localized Fe 3d electrons in the YIG film and delocalized electrons of the surface and bulk states in the Bi₂Se₃ film.

Design and performance of BOREAS, the beamline for resonant X-ray absorption and scattering experiments at the ALBA synchrotron light source

The optical design of the BOREAS beamline operating at the ALBA synchrotron radiation facility is described. BOREAS is dedicated to resonant X-ray absorption and scattering experiments using soft X-rays, in an unusually extended photon energy range from 80 to above 4000 eV, and with full polarization control. Its optical scheme includes a fixed-included-angle, variable-line-spacing grating monochromator and a pair of refocusing mirrors, equipped with benders, in a Kirkpatrick-Baez arrangement. It is equipped with two end-stations, one for X-ray magnetic circular dichroism and the other for resonant magnetic scattering. The commissioning results show that the expected beamline performance is achieved both in terms of energy resolution and of photon flux at the sample position.

Confocal soft X-ray scanning transmission microscopy: setup, alignment procedure and limitations

Zone-plate-based scanning transmission soft X-ray microspectroscopy (STXM) is a well established technique for high-contrast imaging of sufficiently transparent specimens (e.g. ultrathin biological tissues, polymer materials, archaeometric specimens or magnetic thin films) with spatial resolutions in the regime of 20 nm and high spectroscopic or chemical sensitivity. However, due to the relatively large depth of focus of zone plates, the resolution of STXM along the optical axis so far stays unambiguously behind for thicker X-ray transparent specimens. This challenge can be addressed by the implementation of a second zone plate in the detection pathway of the beam, resulting in a confocal arrangement. Within this paper a first proof-of-principle study for a confocal STXM (cSTXM) and an elaborate alignment procedure in transmission and fluorescence geometry are presented. Based on first confocal soft X-ray micrographs of well known specimens, the advantage and limitation of cSTXM as well as further development potentials for future applications are discussed.

Electron-Hole Recombination Time at TiO2 Single-Crystal Surfaces: Influence of Surface Band Bending

Photocatalytic activity is determined by the transport property of photoexcited carriers from the interior to the surface of photocatalysts. Because the carrier dynamics is influenced by a space charge layer (SCL) in the subsurface region, an understanding of the effect of the potential barrier of the SCL on the carrier behavior is essential. Here we have investigated the relaxation time of the photoexcited carriers on single-crystal anatase and rutile TiO2 surfaces by time-resolved photoelectron spectroscopy and found that carrier recombination, taking a nanosecond time scale at room temperature, is strongly influenced by the barrier height of the SCL. Under the flat-band condition, which is realized in nanometer-sized photocatalysts, the carriers have a longer lifetime on the anatase surface than the rutile one, naturally explaining the higher photocatalytic activity for anatase than rutile.