Improvement and quantitative performance estimation of the back support muscle suit

A review of the design of load-carrying exoskeletons

The increasing necessity of load-carrying activities has led to greater human musculoskeletal damage and an increased metabolic cost. With the rise of exoskeleton technology, researchers have begun exploring different approaches to developing wearable robots to augment human load-carrying ability. However, there is a lack of systematic discussion on biomechanics, mechanical designs, and augmentation performance. To achieve this, extensive studies have been reviewed and 108 references are selected mainly from 2013 to 2022 to address the most recent development. Other earlier 20 studies are selected to present the origin of different design principles. In terms of the way to achieve load-carrying augmentation, the exoskeletons reviewed in this paper are sorted by four categories based on the design principles, namely load-suspended backpacks, lower-limb exoskeletons providing joint torques, exoskeletons transferring load to the ground and exoskeletons transferring load between body segments. Specifically, the driving modes of active and passive, the structure of rigid and flexible, the conflict between assistive performance and the mass penalty of the exoskeleton, and the autonomy are discussed in detail in each section to illustrate the advances, challenges, and future trends of exoskeletons designed to carry loads.

Systematic Review of Back-Support Exoskeletons and Soft Robotic Suits

Lower back pain and musculoskeletal injuries are serious concerns for workers subjected to physical workload and manual material handling tasks. Spine assistive exoskeletons are being developed to support the spine and distribute the spine load. This article presents a detailed up-to-date review on the back support exoskeletons by discussing their type (Active/Passive), structure (Rigid/Soft), power transmission methods, weight, maximum assistive force, battery technologies, tasks (lifting, bending, stooping work), kinematic compatibility and other important features. This article also assesses the back support exoskeletons in terms of their ability to reduce the physical load on the spine. By reviewing functional and structural characteristics, the goal is to increase communication and realization among ergonomics practitioners, developers, customers, and factory workers. The search resulted in reviewing 34 exoskeletons of which 16 were passive and 18 were active. In conclusion, back support exoskeletons have immense potential to significantly reduce the factors regarding work-related musculoskeletal injuries. However, various technical challenges and a lack of established safety standards limit the wide adaptation of exoskeletons in industry.

Body-powered variable impedance: An approach to augmenting humans with a passive device by reshaping lifting posture

The movement patterns appropriate for exercise and manual labor do not always correspond to what people instinctively choose for better comfort. Without expert guidance, people can even increase the risk of injury by choosing a comfortable posture rather than the appropriate one, notably when lifting objects. Even in situations where squatting is accepted as a desirable lifting strategy, people tend to choose the more comfortable strategy of stooping or semisquatting. The common approach to correcting lifting posture, immobilizing vulnerable joints via fixation, is insufficient for preventing back injuries sustained from repetitive lifting. Instead, when lifting small but heavy objects, the entire kinetic chain should cooperate to achieve a series of squat-lifting patterns. Inspired by the observation that force fields affect the coordination of voluntary human motion, we devised a passive exosuit embedded with a body-powered variable-impedance mechanism. The exosuit adds impedance to the human joints according to how far the wearer's movement is from the squat-lifting trajectories so that it hinders stooping but facilitates squatting. In an experiment that entailed lifting a small 10-kg box, 10 first-time users changed their voluntary lifting motion closer to squatting on average. Simulation results based on recorded kinematic and kinetic data showed that this postural change reduced the compression force, shear force, and moment on the lumbosacral joint. Our work demonstrates the potential of using an exosuit to help people move in a desirable manner without requiring a complicated, bulky mechanical system.

Identification of care tasks for the use of wearable transfer support robots - an observational study at nursing facilities using robots on a daily basis

BACKGROUND

To reduce the physical burden of caregivers, wearable transfer support robots are highly desirable. Although these robots are reportedly effective for specific tasks in experimental environments, there is little information about their effectiveness at nursing care facilities. The aim of this study was to identify care tasks and operations suitable for the use of these robots among caregivers in nursing facilities where these robots have been in use on a daily basis.

METHODS

A 1-min observational time-motion analysis was conducted to examine care tasks and operations in two nursing facilities where wearable transfer support robots, namely Muscle Suit or HAL® Lumbar Type for Care Support, have been used routinely on a daily basis for more than 24 months.

RESULTS

Analysis of the care tasks and their time ratio while wearing the equipment revealed that both robots were used conspicuously for direct care in over 70% of transits, especially during transfer assistance and toileting care. Furthermore, these robots were used intensively in the morning along with wake-up calls to care recipients, where pre-assigned wearers used them as part of their "routine work."

CONCLUSIONS

We found that these wearable transfer support robots enabled effective performance of care tasks and operations in nursing facilities where these robots have been used on a daily basis for an extended period of time. These results may lead to the effective implementation and sustained operation of other types of care robots in the future.

TRIAL REGISTRATION

UMIN Clinical Trials Registry no. UMIN000039204 . Trial registration date: January 21, 2020. Interventional study. Parallel, non-randomized, single blinded.

Review of Current Spinal Robotic Orthoses

Osteoporotic spine fractures (OSF) are common sequelae of osteoporosis. OSF are directly correlated with increasing age and incidence of osteoporosis. OSF are treated conservatively or surgically. Associated acute pain, chronic disabilities, and progressive deformities are well documented. Conservative measures include a combination of initial bed rest, analgesia, early physiotherapy, and a spinal brace (orthosis), with the aim for early rehabilitation to prevent complications of immobile state. Spinal bracing is commonly used for symptomatic management of OSF. While traditional spinal braces aim to maintain the neutral spinal alignment and reduce the axial loading on the fractured vertebrae, they are well known for complications including discomfort with reduced compliance, atrophy of paraspinal muscles, and restriction of chest expansion leading to chest infections. Exoskeletons have been developed to passively assist and actively augment human movements with different types of actuators. Flexible, versatile spinal exoskeletons are designed to better support the spine. As new technologies enable the development of motorized wearable exoskeletons, several types have been introduced into the medical field application. We have provided a thorough review of the current spinal robotic technologies in this paper. The shortcomings in the current spinal exoskeletons were identified. Their limitations on the use for patients with OSF with potential improvement strategies were discussed. With our current knowledge of spinal orthosis for conservatively managed OSF, a semi-rigid backpack style thoracolumbar spinal robotic orthosis will reduce spinal bone stress and improve back muscle support. This will lead to back pain reduction, improved posture, and overall mobility. Early mobilization is an important part of management of patients with OSF as it reduces the chance of developing complications related to their immobile state for patients with OSF, which will be helpful for their recovery.

The use of exoskeletons in the occupational context for primary, secondary, and tertiary prevention of work-related musculoskeletal complaints

OCCUPATIONAL APPLICATIONS This guideline includes 20 recommendations and four key statements that achieved consensus or strong consensus regarding the application of exoskeletons in the workplace for the prevention of musculoskeletal complaints and diseases, the general use and implementation of exoskeletons, and recommendations for risk assessment. The guideline is intended for company physicians, occupational physicians, ergonomists, occupational safety specialists, and employers, and serves as information for all other actors in practical occupational safety. Due to the lack of evidence from the scientific literature, the recommendations and key statements are the result of expert discussions that were conducted at a consensus conference in accordance with the Regulations of the Association of the Scientific Medical Societies in Germany, moderated by an external consultant.

Acceleration-based Assistive Strategy to Control a Back-support Exoskeleton for Load Handling: Preliminary Evaluation

Industrial active exoskeletons have recently achieved considerable interest, due to their intrinsic versatility compared to passive devices. To achieve this versatility, an important open challenge is the design of appropriate control strategies to automatically modulate the physical assistance according to the activity the user is performing.This work focuses on active back-support exoskeletons. To improve the assistance provided in dynamic situations with respect to state-of-the-art methods, a new strategy making use of the angular acceleration of the user's trunk is presented.The feasibility and effectiveness of the proposed strategy were tested experimentally on a prototype in a load handling task. The main advantages in terms of assistive torque profiles emerge during the transition phases of the movement (i.e. beginning and end of lowering and lifting) indicating an appropriate adaptation to the dynamics of the execution.In this preliminary evaluation, the data on peak muscular activity at the spine show promising trends, encouraging further developments and a more detailed evaluation.

Passive Back Support Exoskeleton Improves Range of Motion Using Flexible Beams

In the EU, lower back pain affects more than 40% of the working population. Mechanical loading of the lower back has been shown to be an important risk factor. Peak mechanical load can be reduced by ergonomic interventions, the use of cranes and, more recently, by the use of exoskeletons. Despite recent advances in the development of exoskeletons for industrial applications, they are not widely adopted by industry yet. Some of the challenges, which have to be overcome are a reduced range of motion, misalignment between the human anatomy and kinematics of the exoskeleton as well as discomfort. A body of research exists on how an exoskeleton can be designed to compensate for misalignment and thereby improve comfort. However, how to design an exoskeleton that achieves a similar range of motion as a human lumbar spine of up to 60° in the sagittal plane, has not been extensively investigated. We addressed this need by developing and testing a novel passive back support exoskeleton, including a mechanism comprised of flexible beams, which run in parallel to the spine, providing a large range of motion and lowering the peak torque requirements around the lumbo-sacral (L5/S1) joint. Furthermore, we ran a pilot study to test the biomechanical (N = 2) and functional (N = 3) impact on subjects while wearing the exoskeleton. The biomechanical testing was once performed with flexible beams as a back interface and once with a rigid structure. An increase of more than 25% range of motion of the trunk in the sagittal plane was observed by using the flexible beams. The pilot functional tests, which are compared to results from a previous study with the Laevo device, suggest, that the novel exoskeleton is perceived as less hindering in almost all tested tasks.

A Real-Time Lift Detection Strategy for a Hip Exoskeleton

Repetitive lifting of heavy loads increases the risk of back pain and even lumbar vertebral injuries to workers. Active exoskeletons can help workers lift loads by providing power assistance, and therefore reduce the moment and force applied on L5/S1 joint of human body when performing lifting tasks. However, most existing active exoskeletons for lifting assistance are unable to automatically detect user's lift movement, which limits the wide application of active exoskeletons in factories. In this paper, we propose a simple but effective lift detection strategy for exoskeleton control. This strategy uses only exoskeleton integrated sensors, without any extra sensors to capture human motion intentions. This makes the lift detection system more practical for applications in manufacturing environments. Seven healthy subjects participated in this research. Three different sessions were carried out, two for training and one for testing the algorithm. In the two training sessions, subjects were asked to wear a hip exoskeleton, controlled in transparent mode, and perform repetitive lifting and a locomotion circuit; lifting was executed with different techniques. The collected data were used to train the lift detection model. In the testing session, the exoskeleton was controlled in order to deliver torque to assist the lifting action, based on the lift detection made by the trained algorithm. The across-subject average accuracy of lift detection during online test was 97.97 ± 1.39% with subject-dependent model. Offline, the algorithm was trained with data acquired from all subjects to verify its performance for subject-independent detection, and an accuracy of 97.48 ± 1.53% was achieved. In addition, timeliness of the algorithm was quantitatively evaluated and the time delay was <160 ms across different lifting speeds. Surface electromyography was also measured to assess the efficacy of the exoskeleton in assisting subjects in performing load lifting tasks. These results validate the promise of applying the proposed lift detection strategy for exoskeleton control aiming at lift assistance.

Quantitative assessment of swallowing activity by MMG measurement with PVDF film

Difficulty of swallowing, called dysphagia, leads to aspiration pneumonia which is particularly a big health concern in aging societies. Therefore, prevention and treatment of dysphagia would contribute to extending healthy-life and QOL of elderly people and decreasing healthcare cost. Robotics technologies are expected as one of the effective methods to solve the problem in terms of detecting malfunction in swallowing and recovering swallowing function. The aim of this study is to investigate muscle activity during normal swallowing using mechanomyography (MMG) with PolyVinylidene DiFluoride (PVDF) film which is a ferroelectrics polymer. Measurement of MMG signal during voluntary isometric contraction of the biceps brachii muscle was conducted to confirm whether PVDF film can detect MMG signal. In the experiment, surface electromyography (sEMG) was also measured as a reference to estimate muscle activity for comparison. Then, activities of swallowing muscles during normal swallowing with different volume of bolus were measured using MMG signal. As the result, it was confirmed that swallowing activity can be quantified by the detected MMG signal from different region of neck.