Evaluating the feasibility of 12-lead electrocardiogram reconstruction from limited leads using deep learning

BACKGROUND

Wearables with integrated electrocardiogram (ECG) acquisition have made single-lead ECGs widely accessible to patients and consumers. However, the 12-lead ECG remains the gold standard for most clinical cardiac assessments. In this study, we developed a neural network to reconstruct 12-lead ECGs from single-lead and dual-lead ECGs, and evaluated the mathematical accuracy.

METHODS

We used lead I or leads I and II from 9514 individuals from the Physikalisch-Technische Bundesanstalt (PTB-XL) cohort and a generative adversarial network, with the aim of recreating the missing leads from the 12-lead ECG. ECGs were divided into training, validation, and testing (10%). Original and recreated leads were measured with a commercially available algorithm. Differences in means and variances were assessed with Student's t-tests and F-tests, respectively. Calibration and bias were assessed with Bland-Altman plots. Inter-lead correlations were compared in original and recreated ECGs.

RESULTS

The variability of precordial ECG amplitudes is significantly reduced in recreated ECGs compared to real ECGs (all p < 0.05), indicating regression-to-the-mean. Amplitude averages are recreated with bias (p < 0.05 for most leads). Reconstruction errors depend on the real amplitudes, suggesting regression-to-the-mean (R2 between target and error in R-peak amplitude in lead V3: 0.92). The relations between lead markers have a similar slope but are much stronger due to reduced variance (R-peak amplitude R2 between leads I and V3, real ECGs: 0.04, recreated ECGs: 0.49). Using two leads does not significantly improve 12-lead recreation.

CONCLUSIONS

AI-based 12-lead ECG reconstruction results in a regression-to-the-mean effect rather than personalized output, rendering it unsuitable for clinical use.

A wavelet subband based LSTM model for 12-lead ECG synthesis from reduced lead set

Synthesis of a 12-lead electrocardiogram from a reduced lead set has previously been extensively studied in order to meet patient comfort, minimise complexity, and enable telemonitoring. Traditional methods relied solely on the inter-lead correlation between the standard twelve leads for learning the models. The 12-lead ECG possesses not only inter-lead correlation but also intra-lead correlation. Learning a model that can exploit this spatio-temporal information in the ECG could generate lead signals while preserving important diagnostic information. The proposed approach takes leverage of the enhanced inter-lead correlation of the ECG signal in the wavelet domain. Long-short-term memory (LSTM) networks, which have emerged as a powerful tool for sequential data mining, are a type of recurrent neural network architecture with an inherent capability to capture the spatiotemporal information of the heart signal. This work proposes the deep learning architecture that utilizes the discrete wavelet transform and the LSTM to reconstruct a generic 12-lead ECG from a reduced lead set. The experimental results are evaluated using different diagnostic measures and similarity metrics. The proposed framework is well founded, and accurate reconstruction is possible as it can capture clinically significant features and provides a robust solution against noise.

AI-enhanced reconstruction of the 12-lead electrocardiogram via 3-leads with accurate clinical assessment

The 12-lead electrocardiogram (ECG) is an integral component to the diagnosis of a multitude of cardiovascular conditions. It is performed using a complex set of skin surface electrodes, limiting its use outside traditional clinical settings. We developed an artificial intelligence algorithm, trained over 600,000 clinically acquired ECGs, to explore whether fewer leads as input are sufficient to reconstruct a 12-lead ECG. Two limb leads (I and II) and one precordial lead (V3) were required to generate a reconstructed 12-lead ECG highly correlated with the original ECG. An automatic algorithm for detection of ECG features consistent with acute myocardial infarction (MI) performed similarly for original and reconstructed ECGs (AUC = 0.95). When interpreted by cardiologists, reconstructed ECGs achieved an accuracy of 81.4 ± 5.0% in identifying ECG features of ST-segment elevation MI, comparable with the original 12-lead ECGs (accuracy 84.6 ± 4.6%). These results will impact development efforts to innovate ECG acquisition methods with simplified tools in non-specialized settings.

AI-Enhanced Reconstruction of the 12-Lead Electrocardiogram via 3-Leads with Accurate Clinical Assessment

The 12-lead electrocardiogram (ECG) is an integral component to the diagnosis of a multitude of cardiovascular conditions. It is performed using a complex set of skin surface electrodes, limiting its use outside traditional clinical settings. We developed an artificial intelligence algorithm, trained over 600,000 clinically acquired ECGs, to explore whether fewer leads as input are sufficient to reconstruct a full 12-lead ECG. Two limb leads (I and II) and one precordial lead (V3) were required to generate a reconstructed synthetic 12-lead ECG highly correlated with the original ECG. An automatic algorithm for detection of acute myocardial infarction (MI) performed similarly for original and reconstructed ECGs (AUC=0.94). When interpreted by cardiologists, reconstructed ECGs achieved an accuracy of 81.4±5.0% in identifying ST elevation MI, comparable with the original 12-lead ECGs (accuracy 84.6±4.6%). These results will impact development efforts to innovate ECG acquisition methods with simplified tools in non-specialized settings.

Design and technical validation to generate a synthetic 12-lead electrocardiogram dataset to promote artificial intelligence research

Purpose

The purpose of this study is to construct a synthetic dataset of ECG signal that overcomes the sensitivity of personal information and the complexity of disclosure policies.

Methods

The public dataset was constructed by generating synthetic data based on the deep learning model using a convolution neural network (CNN) and bi-directional long short-term memory (Bi-LSTM), and the effectiveness of the dataset was verified by developing classification models for ECG diagnoses.

Results

The synthetic 12-lead ECG dataset generated consists of a total of 6000 ECGs, with normal and 5 abnormal groups. The synthetic ECG signal has a waveform pattern similar to the original ECG signal, the average RMSE between the two signals is 0.042 µV, and the average cosine similarity is 0.993. In addition, five classification models were developed to verify the effect of the synthetic dataset and showed performance similar to that of the model made with the actual dataset. In particular, even when the real dataset was applied as a test set to the classification model trained with the synthetic dataset, the classification performance of all models showed high accuracy (average accuracy 93.41%).

Conclusion

The synthetic 12-lead ECG dataset was confirmed to perform similarly to the real-world 12-lead ECG in the classification model. This implies that a synthetic dataset can perform similarly to a real dataset in clinical research using AI. The synthetic dataset generation process in this study provides a way to overcome the medical data disclosure challenges constrained by privacy rights, a way to encourage open data policies, and contribute significantly to promoting cardiovascular disease research.

A novel method for 12-lead ECG reconstruction

This paper presents a novel approach to synthesize a standard 12-lead electrocardiogram (ECG) from any three independent ECG leads using a patient-specific encoder-decoder convolutional neural network. The objective is to decrease the number of recording locations required to obtain the same information as a 12-lead ECG, thereby enhancing patients' comfort during the recording process. We evaluate the proposed algorithm on a dataset comprising fifteen patients, as well as a randomly selected cohort of patients from the PTB diagnostic database. To evaluate the precision of the reconstructed ECG signals, we present two metrics: the correlation coefficient and root mean square error. Our proposed method achieves superior performance compared to most existing synthesis techniques, with an average correlation coefficient of 0.976 and 0.97 for datasets, respectively. These results demonstrate the potential of our approach to improve the efficiency and comfort of ECG recording for patients, while maintaining high diagnostic accuracy.

Myocardial infarction detection using ITD, DWT and deterministic learning based on ECG signals

Nowadays, cardiovascular diseases (CVD) is one of the prime causes of human mortality, which has received tremendous and elaborative research interests regarding the prevention issue. Myocardial ischemia is a kind of CVD which will lead to myocardial infarction (MI). The diagnostic criterion of MI is supplemented with clinical judgement and several electrocardiographic (ECG) or vectorcardiographic (VCG) programs. However the visual inspection of ECG or VCG signals by cardiologists is tedious, laborious and subjective. To overcome such disadvantages, numerous MI detection techniques including signal processing and artificial intelligence tools have been developed. In this study, we propose a novel technique for automatic detection of MI based on disparity of cardiac system dynamics and synthesis of the standard 12-lead and Frank XYZ leads. First, 12-lead ECG signals are synthesized with Frank XYZ leads to build a hybrid 4-dimensional cardiac vector, which is decomposed into a series of proper rotation components (PRCs) by using the intrinsic time-scale decomposition (ITD) method. The novel cardiac vector may fully reflect the pathological alterations provoked by MI and may be correlated to the disparity of cardiac system dynamics between healthy and MI subjects. ITD is employed to measure the variability of cardiac vector and the first PRCs are extracted as predominant PRCs which contain most of the cardiac vector's energy. Second, four levels discrete wavelet transform with third-order Daubechies (db3) wavelet function is employed to decompose the predominant PRCs into different frequency bands, which combines with three-dimensional phase space reconstruction to derive features. The properties associated with the cardiac system dynamics are preserved. Since the frequency components above 40 Hz are lack of use in ECG analysis, in order to reduce the feature dimension, the advisable sub-band (D4) is selected for feature acquisition. Third, neural networks are then used to model, identify and classify cardiac system dynamics between normal (healthy) and MI cardiac vector signals. The difference of cardiac system dynamics between healthy control and MI cardiac vector is computed and used for the detection of MI based on a bank of estimators. Finally, experiments are carried out on the PhysioNet PTB database to assess the effectiveness of the proposed method, in which conventional 12-lead and Frank XYZ leads ECG signal fragments from 148 patients with MI and 52 healthy controls were extracted. By using the tenfold cross-validation style, the achieved average classification accuracy is reported to be 98.20%. Results verify the effectiveness of the proposed method which can serve as a potential candidate for the automatic detection of MI in the clinical application.

Personalized LSTM Models for ECG Lead Transformations Led to Fewer Diagnostic Errors Than Generalized Models: Deriving 12-Lead ECG from Lead II, V2, and V6

BACKGROUND AND OBJECTIVE

The prevalence of chronic cardiovascular diseases (CVDs) has risen globally, nearly doubling from 1990 to 2019. ECG is a simple, non-invasive measurement that can help identify CVDs at an early and treatable stage. A multi-lead ECG, up to 15 leads in a wearable form factor, is desirable. We seek to derive multiple ECG leads from a select subset of leads so that the number of electrodes can be reduced in line with a patient-friendly wearable device. We further compare personalized derivations to generalized derivations.

METHODS

Long-Short Term Memory (LSTM) networks using Lead II, V2, and V6 as input are trained to obtain generalized models using Bayesian Optimization for hyperparameter tuning for all patients and personalized models for each patient by applying transfer learning to the generalized models. We compare quantitatively using error metrics Root Mean Square Error (RMSE), R², and Pearson correlation (ρ). We compare qualitatively by matching ECG interpretations of board-certified cardiologists.

RESULTS

ECG interpretations from personalized models, when corrected for an intra-observer variance, were identical to the original ECGs, whereas generalized models led to errors. Mean performance values for generalized and personalized models were (RMSE-74.31 µV, R²-72.05, ρ-0.88) and (RMSE-26.27 µV, R²-96.38, ρ-0.98), respectively.

CONCLUSIONS

Diagnostic accuracy based on derived ECG is the most critical validation of ECG derivation methods. Personalized transformation should be sought to derive ECGs. Performing a personalized calibration step to wearable ECG systems and LSTM networks could yield ambulatory 15-lead ECGs with accuracy comparable to clinical ECGs.

Electrocardiogram lead conversion from single-lead blindly-segmented signals

BACKGROUND

The standard configuration's set of twelve electrocardiogram (ECG) leads is optimal for the medical diagnosis of diverse cardiac conditions. However, it requires ten electrodes on the patient's limbs and chest, which is uncomfortable and cumbersome. Interlead conversion methods can reconstruct missing leads and enable more comfortable acquisitions, including in wearable devices, while still allowing for adequate diagnoses. Currently, methodologies for interlead ECG conversion either require multiple reference (input) leads and/or require input signals to be temporally aligned considering the ECG landmarks.

METHODS

Unlike the methods in the literature, this paper studies the possibility of converting ECG signals into all twelve standard configuration leads using signal segments from only one reference lead, without temporal alignment (blindly-segmented). The proposed methodology is based on a deep learning encoder-decoder U-Net architecture, which is compared with adaptations based on convolutional autoencoders and label refinement networks. Moreover, the method is explored for conversion with one single shared encoder or multiple individual encoders for each lead.

RESULTS

Despite the more challenging settings, the proposed methodology was able to attain state-of-the-art level performance in multiple target leads, and both lead I and lead II seem especially suitable to convert certain sets of leads. In cross-database tests, the methodology offered promising results despite acquisition setup differences. Furthermore, results show that the presence of medical conditions does not have a considerable effect on the method's performance.

CONCLUSIONS

This study shows the feasibility of converting ECG signals using single-lead blindly-segmented inputs. Although the results are promising, further efforts should be devoted towards the improvement of the methodologies, especially the robustness to diverse acquisition setups, in order to be applicable to cardiac health monitoring in wearable devices and less obtrusive clinical scenarios.

GRU Neural Network Improved Bioimpedance Based Stroke Volume Estimation during Ergometry Stress Test

Cardiovascular diseases (CVDs) are one of the leading members of non-communicable diseases. An early diagnosis is essential for effective treatment, to reduce hospitalization time and health care costs. Nowadays, an exercise stress test on an ergometer is used to identify CVDs. To improve the accuracy of diagnostics, the hemodynamic status and parameters of a person can be investigated. For hemodynamic management, thoracic electrical bioimpedance has recently been used. This technique offers beat-to-beat stroke volume calculation but suffers from an artifact-sensitive signal that makes such measurements difficult during movement. We propose a new method based on a gated recurrent unit (GRU) neural network and the ECG signal to improve the measurement of bioimpedance signals, reduce artifacts and calculate hemodynamic parameters. We conducted a study with 23 subjects. The new approach is compared to ensemble averaging, scaled Fourier linear combiner, adaptive filter, and simple neural networks. The GRU neural network performs better with single artifact events than shallow neural networks (mean error -0.0244, mean square error 0.0181 for normalized stroke volume). The GRU network is superior to other algorithms using time-correlated data for the exercise stress test.

SHUBHCHINTAK: An efficient remote health monitoring approach for elderly people

With the proliferation of IoT technology, it is anticipated that healthcare services, particularly for the elderly persons, will become a major thrust area of research in the coming days. Aim of this work is to design a fit-band containing multiple sensors to provide remote healthcare services for the elderly persons. An application has been designed to capture health data from the fit-band, pre-process the data and then send them to cloud for further analysis. A wireless Bluetooth enabled connection is proposed to establish communications between sensors and the application for data transmission. In the proposed application, there are three different front-end interfaces for three different users: system administrator, patient and doctor. The data collected from the patient's fit-band are sent to a cloud data storage, where the data will be analyzed to detect anomaly (e.g., heart attack, sleep apnea, etc.). A Convolution Neural Network (CNN) model is proposed for anomaly detection. For the classification of anomaly, a Long Short Term Memory (LSTM) model is proposed. In the presence of anomaly, the system immediately connects a doctor through a phone call. A prototype system termed as Shubhchintak has been developed in Android/IOS environment and tested with a number of users. The fit-band provides data tracking with an overall accuracy of 99%; the system provides a response with 3000 requests in less than 100 ms. Also, Shubhchintak provides a real-time feedback with an accuracy of 97%. Shubhchintak is also tested by patients and doctors of a nearby hospital. Shubhchintak is shown to be a simple to use, cost effective, comfortable, and efficient system compared to the existing state of the art solutions.

Lead Reconstruction Using Artificial Neural Networks for Ambulatory ECG Acquisition

One of the most powerful techniques to diagnose cardiovascular diseases is to analyze the electrocardiogram (ECG). To increase diagnostic sensitivity, the ECG might need to be acquired using an ambulatory system, as symptoms may occur during a patient’s daily life. In this paper, we propose using an ambulatory ECG (aECG) recording device with a low number of leads and then estimating the views that would have been obtained with a standard ECG location, reconstructing the complete Standard 12-Lead System, the most widely used system for diagnosis by cardiologists. Four approaches have been explored, including Linear Regression with ECG segmentation and Artificial Neural Networks (ANN). The best reconstruction algorithm is based on ANN, which reconstructs the actual ECG signal with high precision, as the results bring a high accuracy (RMS Error < 13 μV and CC > 99.7%) for the set of patients analyzed in this paper. This study supports the hypothesis that it is possible to reconstruct the Standard 12-Lead System using an aECG recording device with less leads.

Over-fitting suppression training strategies for deep learning-based atrial fibrillation detection

Nowadays, deep learning-based models have been widely developed for atrial fibrillation (AF) detection in electrocardiogram (ECG) signals. However, owing to the inevitable over-fitting problem, classification accuracy of the developed models severely differed when applying on the independent test datasets. This situation is more significant for AF detection from dynamic ECGs. In this study, we explored two potential training strategies to address the over-fitting problem in AF detection. The first one is to use the Fast Fourier transform (FFT) and Hanning-window-based filter to suppress the influence from individual difference. Another is to train the model on the wearable ECG data to improve the robustness of model. Wearable ECG data from 29 patients with arrhythmia were collected for at least 24 h. To verify the effectiveness of the training strategies, a Long Short-Term Memory (LSTM) and Convolution Neural Network (CNN)-based model was proposed and tested. We tested the model on the independent wearable ECG data set, as well as the MIT-BIH Atrial Fibrillation database and PhysioNet/Computing in Cardiology Challenge 2017 database. The model achieved 96.23%, 95.44%, and 95.28% accuracy rates on the three databases, respectively. Pertaining to the comparison of the accuracy rates on each training set, the accuracy of the model trained in conjunction with the proposed training strategies only reduced by 2%, while the accuracy of the model trained without the training strategies decreased by approximately 15%. Therefore, the proposed training strategies serve as effective mechanisms for devising a robust AF detector and significantly enhanced the detection accuracy rates of the resulting deep networks.

Automatic Classification of Myocardial Infarction Using Spline Representation of Single-Lead Derived Vectorcardiography

Myocardial infarction (MI) is one of the most prevalent cardiovascular diseases worldwide and most patients suffer from MI without awareness. Therefore, early diagnosis and timely treatment are crucial to guarantee the life safety of MI patients. Most wearable monitoring devices only provide single-lead electrocardiography (ECG), which represents a major limitation for their applicability in diagnosis of MI. Incorporating the derived vectorcardiography (VCG) techniques can help monitor the three-dimensional electrical activities of human hearts. This study presents a patient-specific reconstruction method based on long short-term memory (LSTM) network to exploit both intra- and inter-lead correlations of ECG signals. MI-induced changes in the morphological and temporal wave features are extracted from the derived VCG using spline approximation. After the feature extraction, a classifier based on multilayer perceptron network is used for MI classification. Experiments on PTB diagnostic database demonstrate that the proposed system achieved satisfactory performance to differentiating MI patients from healthy subjects and to localizing the infarcted area.

Reconstruction of 12-Lead Electrocardiogram from a Three-Lead Patch-Type Device Using a LSTM Network

Reconstructing a standard 12-lead electrocardiogram (ECG) from signals received from electrodes packed into a patch-type device is a challenging task in the field of medical instrumentation. All attempts to obtain a clinically valid 12-lead ECG using a patch-type device were not satisfactory. In this study, we designed the hardware for a three-lead patch-type ECG device and employed a long short-term memory (LSTM) network that can overcome the limitations of the linear regression algorithm used for ECG reconstruction. The LSTM network can overcome the issue of reduced horizontal components of the vector in the electric signal obtained from the patch-type device attached to the anterior chest. The reconstructed 12-lead ECG that uses the LSTM network was tested against a standard 12-lead ECG in 30 healthy subjects and ECGs of 30 patients with pathologic findings. The average correlation coefficient of the LSTM network was found to be 0.95. The ability of the reconstructed ECG to detect pathologic abnormalities was identical to that of the standard ECG. In conclusion, the reconstruction of a standard 12-lead ECG using a three-lead patch-type device is feasible, and such an ECG is an equivalent alternative to a standard 12-lead ECG.

Classification of myocardial infarction based on hybrid feature extraction and artificial intelligence tools by adopting tunable-Q wavelet transform (TQWT), variational mode decomposition (VMD) and neural networks

Cardiovascular diseases (CVD) is the leading cause of human mortality and morbidity around the world, in which myocardial infarction (MI) is a silent condition that irreversibly damages the heart muscles. Currently, electrocardiogram (ECG) is widely used by the clinicians to diagnose MI patients due to its inexpensiveness and non-invasive nature. Pathological alterations provoked by MI cause slow conduction by increasing axial resistance on coupling between cells. This issue may cause abnormal patterns in the dynamics of the tip of the cardiac vector in the ECG signals. However, manual interpretation of the pathological alternations induced by MI is a time-consuming, tedious and subjective task. To overcome such disadvantages, computer-aided diagnosis techniques including signal processing and artificial intelligence tools have been developed. In this study we propose a novel technique for automatic detection of MI based on hybrid feature extraction and artificial intelligence tools. Tunable quality factor (Q-factor) wavelet transform (TQWT), variational mode decomposition (VMD) and phase space reconstruction (PSR) are utilized to extract representative features to form cardiac vectors with synthesis of the standard 12-lead and Frank XYZ leads. They are combined with neural networks to model, identify and detect abnormal patterns in the dynamics of cardiac system caused by MI. First, 12-lead ECG signals are reduced to 3-dimensional VCG signals, which are synthesized with Frank XYZ leads to build a hybrid 4-dimensional cardiac vector. Second, this vector is decomposed into a set of frequency subbands with a number of decomposition levels by using the TQWT method. Third, VMD is employed to decompose the subband of the 4-dimensional cardiac vector into different intrinsic modes, in which the first intrinsic mode contains the majority of the cardiac vector's energy and is considered to be the predominant intrinsic mode. It is selected to construct the reference variable for analysis. Fourth, phase space of the reference variable is reconstructed, in which the properties associated with the nonlinear cardiac system dynamics are preserved. Three-dimensional (3D) PSR together with Euclidean distance (ED) has been utilized to derive features, which demonstrate significant difference in cardiac system dynamics between normal (healthy) and MI cardiac vector signals. Fifth, cardiac system dynamics can be modeled and identified using neural networks, which employ the ED of 3D PSR of the reference variable as the input features. The difference of cardiac system dynamics between healthy control and MI cardiac vector is computed and used for the detection of MI based on a bank of estimators. Finally, data sets, which include conventional 12-lead and Frank XYZ leads ECG signal fragments from 148 patients with MI and 52 healthy controls from PTB diagnostic ECG database, are used for evaluation. By using the 10-fold cross-validation style, the achieved average classification accuracy is reported to be 97.98%. Currently, ST segment evaluation is one of the major and traditional ways for the MI detection. However, there exist weak or even undetectable ST segments in many ECG signals. Since the proposed method does not rely on the information of ST waves, it can serve as a complementary MI detection algorithm in the intensive care unit (ICU) of hospitals to assist the clinicians in confirming their diagnosis. Overall, our results verify that the proposed features may satisfactorily reflect cardiac system dynamics, and are complementary to the existing ECG features for automatic cardiac function analysis.

A Survey of Heart Anomaly Detection Using Ambulatory Electrocardiogram (ECG)

Cardiovascular diseases (CVDs) are the number one cause of death globally. An estimated 17.9 million people die from CVDs each year, representing 31% of all global deaths. Most cardiac patients require early detection and treatment. Therefore, many products to monitor patient's heart conditions have been introduced on the market. Most of these devices can record a patient's bio-metric signals both in resting and in exercising situations. However, reading the massive amount of raw electrocardiogram (ECG) signals from the sensors is very time-consuming. Automatic anomaly detection for the ECG signals could act as an assistant for doctors to diagnose a cardiac condition. This paper reviews the current state-of-the-art of this technology discusses the pros and cons of the devices and algorithms found in the literature and the possible research directions to develop the next generation of ambulatory monitoring systems.

Signal Quality in Reconstructed 12-Lead Ambulatory ECGs Recorded Using 3-Lead Device

Acute myocardial infraction (AMI) is a leading cause of death in the developed countries. Survival of patients having acute coronary syndrome (ACS) dramatically depends on treatment delay. Hence, a technology that would enable ECG recording immediately after ACS symptom occurrence may significantly decrease AMI mortality. In this study we investigate the signal quality of reconstructed 12-lead ECGs by using 3-lead handheld device with dry electrode in realistic ambulatory conditions. For each subject enrolled in the study an individual transformation matrix was calculated during the calibration procedure, and used for 12-lead reconstruction whenever that subject sends a recording from a handheld device. To evaluate fidelity of 12-lead reconstructions, 3 performance metrics were defined. The results show that the reconstruction error is largest on QRS complex and smallest on ST segment for all 3 metrics. This indicates that the reconstruction of the ST segment, which carries the most important information for ischemia detection, is reconstructed with the highest quality.

A Low-Power High-Data-Transmission Multi-Lead ECG Acquisition Sensor System

This study presents a low-power multi-lead wearable electrocardiogram (ECG) signal sensor system design that can simultaneously acquire the electrocardiograms from three leads, I, II, and V1. The sensor system includes two parts, an ECG test clothing with five electrode patches and an acquisition device. Compared with the traditional 12-lead wired ECG detection instrument, which limits patient mobility and needs medical staff assistance to acquire the ECG signal, the proposed vest-type ECG acquisition system is very comfortable and easy to use by patients themselves anytime and anywhere, especially for the elderly. The proposed study incorporates three methods to reduce the power consumption of the system by optimizing the micro control unit (MCU) working mode, adjusting the radio frequency (RF) parameters, and compressing the transmitted data. In addition, Huffman lossless coding is used to compress the transmitted data in order to increase the sampling rate of the acquisition system. It makes the whole system operate continuously for a long period of time and acquire abundant ECG information, which is helpful for clinical diagnosis. Finally, a series of tests were performed on the designed wearable ECG device. The results have demonstrated that the multi-lead wearable ECG device can collect, process, and transmit ECG data through Bluetooth technology. The ECG waveforms collected by the device are clear, complete, and can be displayed in real-time on a mobile phone. The sampling rate of the proposed wearable sensor system is 250 Hz per lead, which is dependent on the lossless compression scheme. The device achieves a compression ratio of 2.31. By implementing a low power design on the device, the resulting overall operational current of the device is reduced by 37.6% to 9.87 mA under a supply voltage of 2.1 V. The proposed vest-type multi-lead ECG acquisition device can be easily employed by medical staff for clinical diagnosis and is a suitable wearable device in monitoring and nursing the off-ward patients.

A lightweight piecewise linear synthesis method for standard 12-lead ECG signals based on adaptive region segmentation

This paper presents a lightweight synthesis algorithm, named adaptive region segmentation based piecewise linear (ARSPL) algorithm, for reconstructing standard 12-lead electrocardiogram (ECG) signals from a 3-lead subset (I, II and V2). Such a lightweight algorithm is particularly suitable for healthcare mobile devices with limited resources for computing, communication and data storage. After detection of R-peaks, the ECGs are segmented by cardiac cycles. Each cycle is further divided into four regions according to different cardiac electrical activity stages. A personalized linear regression algorithm is then applied to these regions respectively for improved ECG synthesis. The proposed ARSPL method has been tested on 39 subjects randomly selected from the PTB diagnostic ECG database and achieved accurate synthesis of remaining leads with an average correlation coefficient of 0.947, an average root-mean-square error of 55.4μV, and an average runtime performance of 114ms. Overall, these results are significantly better than those of the common linear regression method, the back propagation (BP) neural network and the BP optimized using the genetic algorithm. We have also used the reconstructed ECG signals to evaluate the denivelation of ST segment, which is a potential symptom of intrinsic myocardial disease. After ARSPL, only 10.71% of the synthesized ECG cycles are with a ST-level synthesis error larger than 0.1mV, which is also better than those of the three above-mentioned methods.

Reconstruction of 12-lead ECG Using a Single-patch Device

Objectives: The aim of this study is to develop an optimal electrode system in the form of a small and wearable single-patch ECG monitoring device that allows for the faithful reconstruction of the standard 12-lead ECG.

Methods: The optimized universal electrode positions on the chest and the personalized transformation matrix were determined using linear regression as well as artificial neural networks (ANNs). A total of 24 combinations of 4 neighboring electrodes on 35 channels were evaluated on 19 subjects. Moreover, we analyzed combinations of three electrodes within the four-electrode combination with the best performance.

Results: The mean correlation coefficients were all higher than 0.95 in the case of the ANN method for the combinations of four neighboring electrodes. The reconstructions obtained using the three and four sensing electrodes showed no significant differences. The reconstructed 12-lead ECG obtained using the ANN method is better than that using the MLR method. Therefore, three sensing electrodes and one ground electrode (forming a square) placed below the clavicle on the left were determined to be suitable for ensuring good reconstruction performance.

Conclusions: Since the interelectrode distance was determined to be 5 cm, the suggested approach can be implemented in a single-patch device, which should allow for the continuous monitoring of the standard 12-lead ECG without requiring limb contact, both in daily life and in clinical practice.

Neural Network Prediction of ICU Length of Stay Following Cardiac Surgery Based on Pre-Incision Variables

Background

Advanced predictive analytical techniques are being increasingly applied to clinical risk assessment. This study compared a neural network model to several other models in predicting the length of stay (LOS) in the cardiac surgical intensive care unit (ICU) based on pre-incision patient characteristics.

Methods

Thirty six variables collected from 185 cardiac surgical patients were analyzed for contribution to ICU LOS. The Automatic Linear Modeling (ALM) module of IBM-SPSS software identified 8 factors with statistically significant associations with ICU LOS; these factors were also analyzed with the Artificial Neural Network (ANN) module of the same software. The weighted contributions of each factor (“trained” data) were then applied to data for a “new” patient to predict ICU LOS for that individual.

Results

Factors identified in the ALM model were: use of an intra-aortic balloon pump; O₂ delivery index; age; use of positive cardiac inotropic agents; hematocrit; serum creatinine ≥ 1.3 mg/deciliter; gender; arterial pCO₂. The r² value for ALM prediction of ICU LOS in the initial (training) model was 0.356, p <0.0001. Cross validation in prediction of a “new” patient yielded r² = 0.200, p <0.0001. The same 8 factors analyzed with ANN yielded a training prediction r² of 0.535 (p <0.0001) and a cross validation prediction r² of 0.410, p <0.0001. Two additional predictive algorithms were studied, but they had lower prediction accuracies. Our validated neural network model identified the upper quartile of ICU LOS with an odds ratio of 9.8(p <0.0001).

Conclusions

ANN demonstrated a 2-fold greater accuracy than ALM in prediction of observed ICU LOS. This greater accuracy would be presumed to result from the capacity of ANN to capture nonlinear effects and higher order interactions. Predictive modeling may be of value in early anticipation of risks of post-operative morbidity and utilization of ICU facilities.

Reconstruction of Precordial Lead Electrocardiogram From Limb Leads Using the State-Space Model

A new electrocardiogram (ECG) reconstruction method based on a state-space model is presented. This method was applied to reconstruct precordial leads from limb leads (lead I, II, III) for its validity verification. The system matrices of the state-space model were estimated at the model estimation stage by considering the limb lead signals as the input of the system and precordial lead signals as the output. To evaluate the performance of the proposed method, all of the 549 records of the Physikalisch Technische Bundesanstalt diagnostic ECG database were used, and the correlation coefficients (CC) and root-mean-square errors between reconstructed ECG and measured ECG were calculated. For a more objective evaluation, the results were compared with those of linear regression model that has been typically used for ECG reconstruction. The mean and median values of CCs were higher than 0.988 and 0.995, respectively, for healthy subject data, and also higher than 0.981 and 0.993, respectively, for cardiac patient data and comparable to those by linear regression model. In addition, it was found that the reconstruction performance depended on the type of disease rather than lead type. Among cardiac patient data, hypertrophy, myocarditis, valvular heart disease, and stable heart angina showed higher CC (>0.990), while unstable angina and heart failure showed lower CC of 0.932 and 0.914, respectively. Moreover, when ECG contaminated with the noise was used for reconstruction, the proposed method demonstrated better performance than linear regression model in general.

Empirical mode decomposition and neural network for the classification of electroretinographic data

The processing of biosignals is increasingly being utilized in ambulatory situations in order to extract significant signals' features that can help in clinical diagnosis. However, this task is hampered by the fact that biomedical signals exhibit a complex behavior characterized by strong nonlinear and non-stationary properties that cannot always be perceived by simple visual examination. New processing methods need be considered. In this context, we propose a signal processing method, based on empirical mode decomposition and artificial neural networks, to analyze electroretinograms, i.e., the retinal response to a light flash, with the aim to detect and classify retinal diseases. The present application focuses on two retinal pathologies: achromatopsia, which is a cone disease, and congenital stationary night blindness, which affects the photoreceptoral signal transmission. The results indicate that, under suitable conditions, the method proposed here has the potential to provide a powerful tool for routine clinical examinations, since it is able to recognize with high level of confidence the eventual presence of one of the two pathologies.

Customized prediction of respiratory motion with clustering from multiple patient interaction

Information processing of radiotherapy systems has become an important research area for sophisticated radiation treatment methodology. Geometrically precise delivery of radiotherapy in the thorax and upper abdomen is compromised by respiratory motion during treatment. Accurate prediction of the respiratory motion would be beneficial for improving tumor targeting. However, a wide variety of breathing patterns can make it difficult to predict the breathing motion with explicit models. We proposed a respiratory motion predictor, that is, customized prediction with multiple patient interactions using neural network (CNN). For the preprocedure of prediction for individual patient, we construct the clustering based on breathing patterns of multiple patients using the feature selection metrics that are composed of a variety of breathing features. In the intraprocedure, the proposed CNN used neural networks (NN) for a part of the prediction and the extended Kalman filter (EKF) for a part of the correction. The prediction accuracy of the proposed method was investigated with a variety of prediction time horizons using normalized root mean squared error (NRMSE) values in comparison with the alternate recurrent neural network (RNN). We have also evaluated the prediction accuracy using the marginal value that can be used as the reference value to judge how many signals lie outside the confidence level. The experimental results showed that the proposed CNN can outperform RNN with respect to the prediction accuracy with an improvement of 50%.

Estimating the Universal Positions of Wireless Body Electrodes for Measuring Cardiac Electrical Activity

A methodology is presented for estimating the wireless body electrode (WE) positions and for calculating the linear transformations that enable the synthesis of a 12-lead ECG or a multichannel ECG from three WEs, which in turn simplifies and improves the acquisition of ECGs. We present, compare, and evaluate three approaches to the synthesis: fully personalized, fully universal, and combined with universal leads and personalized transformations. The evaluation results show that WEs are an acceptable alternative to the standard 12-lead ECG device for patients with chronic myocardial ischemia, if either the fully personalized or combined approach is used. The median correlation coefficients are all higher than 0.94 and 0.92 for the fully personalized and combined approaches, respectively. The corresponding kappa and percentual diagnostic agreements between the synthesized and target 12-lead ECGs are 0.88 (95%) and 0.83 (92%), respectively. The evaluation additionally shows that the personalization of the transformations has more impact on the quality of the synthesized ECGs than the personalization of the WEs' positions.

Smart health monitoring systems: an overview of design and modeling

Health monitoring systems have rapidly evolved during the past two decades and have the potential to change the way health care is currently delivered. Although smart health monitoring systems automate patient monitoring tasks and, thereby improve the patient workflow management, their efficiency in clinical settings is still debatable. This paper presents a review of smart health monitoring systems and an overview of their design and modeling. Furthermore, a critical analysis of the efficiency, clinical acceptability, strategies and recommendations on improving current health monitoring systems will be presented. The main aim is to review current state of the art monitoring systems and to perform extensive and an in-depth analysis of the findings in the area of smart health monitoring systems. In order to achieve this, over fifty different monitoring systems have been selected, categorized, classified and compared. Finally, major advances in the system design level have been discussed, current issues facing health care providers, as well as the potential challenges to health monitoring field will be identified and compared to other similar systems.

Irregular breathing classification from multiple patient datasets using neural networks

Complicated breathing behaviors including uncertain and irregular patterns can affect the accuracy of predicting respiratory motion for precise radiation dose delivery [3-6, 25, 36]. So far investigations on irregular breathing patterns have been limited to respiratory monitoring of only extreme inspiration and expiration [37]. Using breathing traces acquired on a Cyberknife treatment facility, we retrospectively categorized breathing data into several classes based on the extracted feature metrics derived from breathing data of multiple patients. The novelty of this paper is that the classifier using neural networks can provide clinical merit for the statistical quantitative modeling of irregular breathing motion based on a regular ratio representing how many regular/irregular patterns exist within an observation period. We propose a new approach to detect irregular breathing patterns using neural networks, where the reconstruction error can be used to build the distribution model for each breathing class. The proposed irregular breathing classification used a regular ratio to decide whether or not the current breathing patterns were regular. The sensitivity, specificity, and receiver operating characteristic (ROC) curve of the proposed irregular breathing pattern detector was analyzed. The experimental results of 448 patients breathing patterns validated the proposed irregular breathing classifier.