Biasing of Capacitive Micromachined Ultrasonic Transducers

Wearable Ultrasound System Using Low-Voltage Time Delay Spectrometry for Dynamic Tissue Imaging

OBJECTIVE

Wearable ultrasound is emerging as a new paradigm of real-time imaging in freely moving humans and has wide applications from cardiovascular health monitoring to human gesture recognition. However, current wearable ultrasound devices have typically employed pulse-echo imaging which requires high excitation voltages and sampling rates, posing safety risks, and requiring specialized hardware. Our objective was to develop and evaluate a wearable ultrasound system based on time delay spectrometry (TDS) that utilizes low-voltage excitation and significantly simplified instrumentation.

METHODS

We developed a TDS-based ultrasound system that utilizes continuous, frequency-modulated sweeps at low excitation voltages. By mixing the transmit and receive signals, the system digitizes the ultrasound signal at audio frequency (kHz) sampling rates. Wearable ultrasound transducers were developed, and the system was characterized in terms of imaging performance, acoustic output, thermal characteristics, and applications in musculoskeletal imaging.

RESULTS

The prototype TDS system is capable of imaging up to 6 cm of depth with signal-to-noise ratio of up to 42 dB at a spatial resolution of 0.33 mm. Acoustic and thermal radiation measurements were within clinically safe limits for continuous ultrasound imaging. We demonstrated the ability to use a 4-channel wearable system for dynamic imaging of muscle activity.

CONCLUSION

We developed a wearable ultrasound imaging system using TDS to mitigate challenges with pulse echo-based wearable ultrasound imaging systems. Our device is capable of high-resolution, dynamic imaging of deep-seated tissue structures and is safe for long-term use.

SIGNIFICANCE

This work paves the way for low-voltage wearable ultrasound imaging devices with significantly reduced hardware complexity.

Critical Advances for Democratizing Ultrasound Diagnostics in Human and Veterinary Medicine

The democratization of ultrasound imaging refers to the process of making ultrasound technology more accessible. Traditionally, ultrasound imaging has been predominately used in specialized medical facilities by trained professionals. Advancements in technology and changes in the health-care landscape have inspired efforts to broaden the availability of ultrasound imaging to various settings such as remote and resource-limited areas. In this review, we highlight several key factors that have contributed to the ongoing democratization of ultrasound imaging, including portable and handheld devices, recent advancements in technology, and training and education. Examples of diagnostic point-of-care ultrasound (POCUS) imaging used in emergency and critical care, gastroenterology, musculoskeletal applications, and other practices are provided for both human and veterinary medicine. Open challenges and the future of POCUS imaging are presented, including the emerging role of artificial intelligence in technology development.

A Study on Capacitive Micromachined Ultrasonic Transducer Periodic Sparse Array

Capacitive micromachined ultrasonic transducer (CMUT) is an ultrasonic transducer based on the microelectromechanical system (MEMS). CMUT elements are easily made into a high-density array, which will increase the hardware complexity. In order to reduce the number of active channels, this paper studies the grating lobes generated by CMUT periodic sparse array (PSA) pairs. Through the design of active element positions in the transmitting and receiving processes, the simulation results of effective aperture and beam patterns show that the common grating lobes (CGLs) generated by the transmit and receive array are eliminated. On the basis of point targets imaging, a CMUT linear array with 256 elements is used to carry out the PSA pairs experiment. Under the same sparse factor (SF), the optimal sparse array configuration can be selected to reduce the imaging artifacts. This conclusion is of great significance for the application of CMUT in three-dimensional ultrasound imaging.

On the Temperature Dependence of the Piezoelectric Response of Prepoled Poly(vinylidene fluoride) Films

There is growing interest in integrating piezoelectric materials with complementary metal-oxide-semiconductor (CMOS) technology to enable expanded applications. A promising material for ultrasound transducer applications is polyvinylidene fluoride (PVDF), a piezoelectric polymer. One of the challenges with PVDF is that its piezoelectric properties can deteriorate when exposed to temperatures in excess of 70 °C for extended periods of time during fabrication. Here, we report on the effects of both shortening annealing times and providing this heating non-uniformly, as is characteristic of some processing conditions, on the piezoelectric coefficient (d ₃₃) of PVDF films for various thicknesses. In this case, no degradation in the d ₃₃ was observed at temperatures below 100 °C for anneal times of under one minute when this heating is applied through one side of the film, making PVDF compatible with many bonding and photolithographic processing steps required for CMOS integration. More surprisingly, for one-sided heating to temperatures between 90 °C and 110 °C, we observed a transient enhancement of the d ₃₃ by nearly 40% that lasted for several hours after these anneals. We attribute this effect to induced strain in these films.