Degradations of aroma characteristics and changes of aroma related compounds, PPO activity, and antioxidant capacity in sugarcane juice during thermal process

Inhibition mechanism of thermally induced furfural in simplified sugarcane juice model system by polyphenols

The inhibitory mechanisms of 5 polyphenols including vanillin (V), chlorogenic acid (CA), hydroxybenzoic acid (HA), 3, 4-dihydroxybenzoic acid (P) and gallic acid (GA) on furfural (FF) in sugarcane juice model systems were investigated in this study. The inhibition rates of all these 5 polyphenols on the FF could reach over 90 %. The contents of Fru and 3-DG in polyphenol system were lower than those in Fru/Ser. The adducts formed from polyphenols and Fru were found in all systems and exhibited a trend of increasing first and then decreasing. The results of correlation analysis indicated CA, HA and P exerted negative effects on of FF. Polyphenols probably inhibited FF generation by 2 ways: competitive binding with the precursors and preventing the conversion of intermediates to FF by scavenging free radicals. These results provided basis for improving the quality and safety of sugarcane juice and the application of polyphenol in food industry.

Roles of ROS in physiological, microbial and metabolomic alterations of fresh-cut sugarcane under red and blue light irradiation

Effects of red and blue light treatment on physiological quality, microbial loads, redox status and metabolomics profiles of fresh-cut sugarcane in vacuum and plastic packages were investigated during 15 d storage. The results showed that light synergistic vacuum treatment delayed the decrease of pH and the increase of respiration rate and microbial loads, enhanced antioxidant capacities and related enzymes activities. Light treatment was beneficial to 1O2 generation, but had opposite effects on O2 -, H2O2 and malondialdehyde. O2- and H2O2 was negatively associated with CAT, sucrose, fructose, glucose, 2-oxoglutaramate, liquiritigenin and dihydromyricetin, positively with PPO and malondialdehyde. Only phenylacetaldehyde exhibited a negative correlation with 1O2. The biosynthesis of sugars, amino acids and flavonoids were the principal metabolite pathways corresponding to oxidative stress in fresh-cut sugarcane. It could be concluded that the concentration of ROS, especially O2- and H2O2, should be appropriate to kill bacteria and retain the quality of fresh-cut sugarcane.

The anabolism of volatile compounds during the pasteurization process of sea buckthorn (Hippophae rhamnoides) pulp

Pasteurization (PS) causes the abnormal changes in volatiles and off-flavors in juices and limit the commercial production of juices. Herein, the first study on the biochemical reaction of volatile and nonvolatile compounds in response to PS factors during the process of sea buckthorn pulp (SBP) was evaluated. Processing conditions (mainly 80 °C for 20 min) had significant effects on the volatile and nonvolatile compounds. The restricted unsaturated fatty acid metabolism led to the greatest decrease of 20.25% in esters with fruity odor, and furans, smelling like caramel and toast, exhibited the highest increase of 136.40% because of the enhancement of the Maillard reaction. Dimethyl sulfide and dimethyl trisulfide elicited a cooked onion-like off-flavor, generated mainly from Strecker degradation of sulfur-containing amino acids, strengthened by the high pH and sufficient substrates due to the highest consumption rates of 4.66% and 12.01% for organic acids and sugars. Reasonable temperature and time control are crucial to the improvement of the process for PS for the SBP industry.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-024-05943-z.

Investigation of the formation of furfural compounds in apple products treated with pasteurization and high pressure processing

The thermal treatment carried out in the processing of apple products is very likely to induce Maillard reaction to produce furfurals, which have raised toxicological concerns. This study aimed to elucidate the formation of furfural compounds in apple products treated with pasteurization and high pressure processing (HPP). The method for simultaneous determination of five furfural compounds including 5-hydroxymethyl-2-furfural (5-HMF), furfural (F), 4-hydroxy-2,5-dimethyl-3(2H)-furanone (HDMF), 2-acetylfuran (FMC), and 5-Methyl-2-furfural (MF) using high performance liquid chromatography equipped with diode array detector (HPLC-DAD) was successfully developed and validated. All five furfurals exhibited an increasing trend after the pasteurization treatment of apple clear juice, cloudy juice, and puree. 5-HMF, F, FMC, and MF were increased significantly during the precooking of apple puree. Whereas there was no significant change in the furfurals formation after apple products treated with high pressure processing (HPP) with 300 MPa and 15 min. Based on the variation of the fructose, glucose and sucrose detected in apple products after thermal treatment, it revealed that the saccharides and thermal treatment have great effect on the furfural compounds formation. The commercial fruit juice samples with different treatments and fruit puree samples treated with pasteurization were also analyzed. Five furfurals were detected more frequently in the fruit juice samples treated with pasteurization or ultra-high temperature instantaneous sterilization (UHT) than those treated with HPP. 5-HMF and FMC were detected in all fruit puree samples treated with pasteurization, followed by F, MF, and HDMF with the detection rate of 79.31 %, 72.41 %, and 51.72 %. The results could provide a reference for risk assessment of furfural compounds and dietary guidance of fruit products for human, especially for infants and young children. Moreover, moderate HPP treatment with 300 MPa and 15 min would be a worthwhile alternative processing technology in the fruit juice and puree production to reduce the formation of furfural compounds.

Impact of Fermentation and Pasteurization on the Physico-Chemical and Phytochemical Composition of Opuntia ficus-indica Juices

Opuntia ficus-indica fruits are a source of valuable compounds, presenting a high nutritional value and several health benefits. However, due to its low shelf life and increased production, there are considerable post-harvest losses of this cactus fruit. So, ways need to be found to drain the increased production of this fruit that is being wasted. The chemical composition of prickly pear makes it an appealing substrate for fermentation. This study investigates the production of fermented beverages produced from Opuntia ficus-indica cv 'Rossa' and evaluates the effects of different fermentation times (18 and 42 h) and post-fermentation pasteurization by high-pressure (500 MPa for 10 min) and temperature (71.1 °C for 30 s) on the physico-chemical and biological characteristics of the produced beverages. According to the results, the beverage produced from 48 h of fermentation has an alcohol content value of 4.90 ± 0.08% (v/v) and a pH of 3.91 ± 0.03. These values contribute to an extended shelf life and improved organoleptic characteristics compared to the sample fermented for 18 h. Additionally, the longer fermentation resulted in 50% fewer total soluble solids, 90% less turbidity, and lower pH when compared to the sample fermented for 18 h. Moreover, overall, high-pressure processing demonstrates better retention of "fresh-like" characteristics, along with higher levels of phytochemical compounds and antioxidant capacity, similar to those observed in the juice for SO^•- and NO^•-scavenging abilities.

Effect of High-Pressure and Thermal Pasteurization on Microbial and Physico-Chemical Properties of Opuntia ficus-indica Juices

Opuntia fruits are recognized for their richness in nutrients and in bioactive compounds, being also highly appreciated by consumers as a juice. Nevertheless, without further processing, prickly pear juices have a short shelf-life, hampering their commercial use. In this work, thermal (TP) and high-pressure (HPP) pasteurization were applied to juices from Opuntia ficus-indica cultivars ‘Rossa’, ‘Gialla’, and ‘Bianca’ to understand the impact of those methods on the microbial safety, physico-chemical properties, and the nutritional content of the samples, over storage at 4 °C. In general, thermal pasteurization at 71.1 °C for 30 s increased the shelf-life by 22 days, and high-pressure pasteurization at 500 MPa for 10 min increased the shelf-life by 52 days with regard to microbial growth as well as maintenance of physical-chemical characteristics. The application of these two pasteurization methods delayed changes in the physico-chemical characteristics of the juices, with a more pronounced effect on the titratable acidity, °Brix and browning. For the same periods of time, the application of pasteurization methods decreased the variation in these quality parameters by around 75%. Similarly, these methods were shown to have the same effect on the polyphenolic concentration as well as the antioxidant activity of the juices. In particular, HPP was more efficient in preventing a decrease in °Brix and increase in titratable acidity, which normally negatively affect the flavor of the juices.

Potential impact of ultrasound, pulsed electric field, high-pressure processing and microfludization against thermal treatments preservation regarding sugarcane juice (Saccharum officinarum)

Sugarcane juice (Saccharum officinarum) is a proven nutritious beverage with high levels of antioxidants, polyphenols, and other beneficial nutrients. It has recently gained consumer interest due to its high nutritional profile and alkaline nature. Still, high polyphenolic and sugar content start the fermentation in juice, resulting in dark coloration. Lately, some novel techniques have been introduced to extend shelf life and improve the nutritional value of sugarcane juice. The introduction of such processing technologies is beneficial over conventional processes and essential for producing chemical-free, high-quality, fresh juices. The synergistic impact of these novel technologies is also advantageous for preserving sugarcane juice. In literature, novel thermal, non-thermal and hurdle technologies have been executed to preserve sugarcane juice. These technologies include high hydrostatic pressure (HHP), ultrasound (US), pulsed electric field (PEF), ultraviolet irradiation (UV), ohmic heating (OH), microwave (MW), microfludization and ozone treatment. This review manifests the impact of novel thermal, non-thermal, and synergistic technologies on sugarcane juice processing and preservation characteristics. Non-thermal techniques have been successfully proved effective and showed better results than novel thermal treatments. Because they reduced microbial load and retained nutritional content, while thermal treatments degraded nutrients and flavor of sugarcane juice. Among non-thermal treatments, HHP is the most efficient technique for the preservation of sugarcane juice while OH is preferable in thermal techniques due to less nutritional loss.

Key Drivers for Non-Centrifugal Sugar Cane Research, Technological Development, and Market Linkage: A Technological Roadmap Approach for Colombia

Food science innovation depends on consumers' needs and is currently seeking functional food with health effects. Non-centrifugal cane sugar (NCS) is known for its potential health effects, but there is a lack of holistic analysis on technological advancement and socio-economic and market trends for decision-making in the development of the technology. The aim of this article was to analyse the research trends, recent patents, and market trends and niches for NCS to structure an NCS technological roadmap. Scientometric, bibliometric methods, and global and local market information on NCS were used. Comprehensive analysis of the worldwide research trends and patents on NCS processing and of the growth of the main niche markets for Colombian NCS exports in the last five years was conducted. Finally, with the information obtained, an NCS technological roadmap was structured, which can be used as a tool for planning innovation processes and supporting the development of new research using market information and new norms forged by the COVID-19 pandemic for Colombian case. Furthermore, the methodological design could be used for other NCS producer countries.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s12355-022-01200-9.

Comparison of the Effects of High Pressure Processing, Pasteurization and High Temperature Short Time on the Physicochemical Attributes, Nutritional Quality, Aroma Profile and Sensory Characteristics of Passion Fruit Purée

The study investigated the effects of high-pressure processing (HPP) (600 MPa/5 min), pasteurization (PT) (85 °C/30 s), and high-temperature short time (HTST) (110 °C/8.6 s) on physicochemical parameters (sugar, acid, pH, TSS), sensory-related attributes (color, aroma compounds), antioxidants (phenolics, vitamin C, carotenoids, antioxidant capacity), and sensory attributes of yellow passion fruit purée (PFP). Compared to the PT and HTST, HPP obtained the PFP with better color, sugar, and organic acid profiles. Although PT was equally effective preservation of antioxidants and antioxidant capacity of PFP compared to HPP, high temperature inevitable resulted in the greater degradation of the aroma profile. The amounts of esters, alcohols, and hydrocarbon in PFP were significantly increased by 11.3%, 21.3%, and 30.0% after HPP, respectively. All samples were evaluated by a panel comprising 30 panelists according to standard QDA (quantitative descriptive analysis) procedure, and the result showed that HPP-treated PFP was rated the highest overall intensity score with 7.06 for its sensory attributes, followed by control (6.96), HTST (6.17), and PT (6.16). Thus, HPP is a suitable alternative technology for achieving the good sensory quality of PFP without compromising their nutritional properties.

Formation of Volatile and Aroma Compounds during the Dehydration of Membrane-Clarified Sugarcane Juice to Non-Centrifugal Sugar

The development of volatile compounds and their precursors during the dehydration process of membrane-clarified sugarcane juice to non-centrifugal sugar (NCS) was investigated. Head-space solid phase microextraction/gas chromatography–mass spectrometry (HS-SPME/GC–MS) coupled with chemometrics was employed to assess the differences at the various stages of the dehydration process. A total of 111 volatile compounds were identified, among which 57 were endogenous compounds from sugarcane juice and displayed an attenuated abundance in the first 30 min. Typical oxygen and nitrogen heterocyclic compounds, including furans and pyrazines, and aldehydes derived were found to be the main volatiles contributing to the formation of NCS characteristic aroma, with phenols, alcohols, esters, acids, and sulfur compounds as supplementary odor. Free amino acids and reducing sugars were identified as important precursors for the aroma development process. The low temperature (90–108 °C) and micro vacuum condition (−0.03 MPa) approach used in this study could be an alternative option for the manufacture of NCS.

Effect of processing and storage on the volatile profile of sugarcane honey: A four-year study

Sugarcane honey (SCH) is a syrup from Madeira Island recognized by its unique and excellent aroma, associated to volatile organic compounds (VOCs) generated during the well-defined five stages of its traditional making process. The establishment of volatile profile throughout all SCH-making stages during four years, allowed the evaluation of the influence of each stage in the typical characterisitcs of SCH. One hundred eighthy seven VOCs were identified, being associated to several origins and formation pathways. VOCs formed during stage 1 and 2 were originate from raw material, and its oxidation (i.e. enzymatic browning) and thermal degradation (i.e. lipid oxidation, Maillard reactions, Strecker degradation). In stage 3 and 4, the caramelization and melanoidin degradation also occurred, while in stage 5, the thermal degradation continues, followed by microbial activity. Chemometric analysis allowed to identify 35 VOCs as potential markers for processing control by the producers and as guarantee of the typicality and authenticity of SCH. Based on the obtained results, we propose for the first time an innovative schematic diagram explaining the potential reactions and pathways for VOCs formation during the different steps of the SCH production.

Influence of food matrix and food processing on the chemical interaction and bioaccessibility of dietary phytochemicals: A review

Consumption of phytochemicals-rich foods shows the health effect on some chronic diseases. However, the bioaccessibility of these phytochemicals is extremely low, and they are often consumed in the diet along with the food matrix. The food matrix can be described as a complex assembly of various physical and chemical interactions that take place between the compounds present in the food. Some studies indicated that the physiological response and the health benefits of phytochemicals are resultant in these interactions. Some food substrates inhibit the absorption of phytochemicals via this interaction. Moreover, processing technologies have been developed to facilitate the release and/or to increase the accessibility of phytochemicals in plants or breakdown of the food matrix. Food processing processes may disrupt the activity of phytochemicals or reduce bioaccessibility. Enhancement of functional and sensorial attributes of phytochemicals in the daily diet may be achieved by modifying the food matrix and food processing in appropriate ways. Therefore, this review concisely elaborated on the mechanism and the influence of food matrix in different parts of the digestive tract in the human body, the chemical interaction between phytochemicals and other compounds in a food matrix, and the various food processing technologies on the bioaccessibility and chemical interaction of dietary phytochemicals. Moreover, the enhancing of phytochemical bioaccessibility through food matrix design and the positive/negative of food processing for dietary phytochemicals was also discussed in this study.

Characterization of volatile compounds in differently coloured Chenopodium quinoa seeds before and after cooking by headspace-gas chromatography-ion mobility spectrometry

Aroma is an important feature of quinoa that influences consumer preferences. Differently coloured quinoa seeds exhibit diverse nutritional characteristics; however, their aromatic profile differences are poorly investigated. The volatile components of 11 quinoa samples were characterized by headspace-gas chromatography-ion mobility spectrometry (HS-GC-IMS). A total of 120 peaks were detected, with 61 compounds identified. White quinoa liberated a high concentration of volatiles with grass (n-hexanol) and green ((E)-2-octenal, (E)-2-heptenal, etc.) aromas before and after cooking, respectively. Raw flaxen samples uniquely released a caramel compound (cyclotene) and exhibited several sweet and caramel volatiles (decanal, 5-methyl-furfural, and 2-furfural) after cooking. Additionally, cooked black quinoa exerted more fruity substances (methyl hexanoate and phenylacetaldehyde). Orthogonal partial least square discriminant analysis clearly distinguished the samples before and after cooking and differentiated the seeds into different colours. The results confirm the potential of HS-GC-IMS to evaluate volatiles in quinoa and are meaningful for quinoa consumption.

Supercritical CO2 Processing of a Functional Beverage Containing Apple Juice and Aqueous Extract of Pfaffia glomerata Roots: Fructooligosaccharides Chemical Stability after Non-Thermal and Thermal Treatments

The effects of supercritical CO₂ processing on the chemical stability of fructooligosaccharides (FOS) and other functional and nutritional compounds were evaluated employing non-thermal and thermal approaches. Apple juice was enriched with Pfaffia glomerata roots aqueous extract due to its high content of short-chain FOS and then subjected to different levels of temperature (40 and 60 °C), pressure (8 and 21 MPa), and CO₂ volume ratio (20 and 50%). The percentage of CO₂ volume was evaluated concerning the total volume of the high-pressure reactor. Also, the functional beverage was thermally treated at 105 °C for 10 min. Physicochemical properties (pH and soluble solid content), beta-ecdysone, sugars (glucose, fructose, and sucrose), and FOS (1-kestose, nystose, and fructofuranosylnystose) content were determined. The pH and soluble solid content did not modify after all treatments. The pressure and CO₂ volume ratio did not influence the FOS content and their chemical profile, however, the temperature increase from 40 to 60 °C increased the nystose and fructofuranosylnystose content. High-temperature thermal processing favored the hydrolysis of 1-kestose and reduced the sucrose content. Regarding beta-ecdysone, its content remained constant after all stabilization treatments demonstrating thus its high chemical stability. Our results demonstrated that supercritical CO₂ technology is a promising technique for the stabilization of FOS-rich beverages since the molecular structures of these fructans were preserved, thus maintaining their prebiotic functionality.