Glucose penetration and fluid transport through coronal root structure and filled root canals

Effect of chlorhexidine digluconate on antimicrobial activity, cell viability and physicochemical properties of three endodontic sealers

OBJECTIVE

Assess the biological and physicochemical properties of AH Plus, BioRoot RCS and Pulp Canal Sealer (PCS) leachates with and without chlorhexidine (CHX).

METHODS

The sealers were studied in no contact and 1-minute contact with CHX. For biological properties (antibacterial activity and cytotoxicity), leachates were formed in saline of freshly mixed, 1-, 7- and 28 days set sealers. The antibacterial properties of sealer leachates were investigated for planktonic and biofilm growth of E. faecalis, S. mutans, S.epidermidis and S.aureus. The 3-(4,5 dimethylthiazolyl-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay was used to evaluate murine fibroblast cell viability after exposure to the leachates. The physical properties (water uptake, sorption, solubility, porosity, surface characteristics) of sealers and the pH of the immersion liquid (saline or distilled water) were also assessed over a 28-days period.

RESULTS

CHX improved the antibacterial properties of the sealer leachates and reduced cell viability for all sealer leachates, except for freshly mixed PCS. BioRoot RCS leachates presented the highest antibacterial properties and cell viability with and without CHX contact. PCS was the material most affected by CHX in terms of physical properties, whereas for AH Plus, solubility was increased. CHX did not affect the physical properties of BioRoot RCS, except for solubility that was decreased. CHX contact did not change sealers' alkalinity in distilled water whereas it increased it for AH Plus and BioRoot RCS in saline.

SIGNIFICANCE

CHX improved the antibacterial efficacy of sealer leachates and either compromised or did not affect cell viability. CHX affected to various extent sealers' physicochemical properties.

Micro-computed Tomographic Evaluation of the Quality of Root Canal Fillings in Mandibular Molars after Obturation for 54 Months

INTRODUCTION

The present study evaluated the percentage volume of voids in root canals of mandibular molars that had been obturated for 54 months.

METHODS

Thirty extracted human mandibular molars were instrumented and debrided. The teeth were assigned to 3 groups (n = 10) according to the filling technique and sealer used: the single-cone technique using AH Plus sealer (AHS; Dentsply Sirona Endodontics, Tulsa, OK) or EndoSequence BC sealer (BCS; Brasseler USA Dental LLC, Savannah, GA) and the warm vertical compaction technique using AH Plus sealer (AHW). The specimens were stored at 37°C and 100% humidity. Micro-computed tomographic imaging was used to scan each specimen 1 day 54 months after obturation. Data were analyzed using 1-way analysis of variance and the paired t test.

RESULTS

The percentage volume of voids in the teeth 1 day after obturation in the AHS group was higher than in the BCS group and the AHW group (P < .05). After 54 months, the proportion of voids decreased in all groups (P < .05). No significant difference was observed between the AHS group and the BCS group after 54 months. Teeth in the AHW group contained fewer voids than the AHS group (P < .05).

CONCLUSIONS

Voids in root canal filling were reduced 54 months after obturation. The warm vertical compaction technique achieved better root canal filling quality in mandibular molars than the single-cone technique when using AHS after long-term storage at 100% humidity.

Antimicrobial and physicochemical characterization of endodontic sealers after exposure to chlorhexidine digluconate

OBJECTIVES

Assess the antibacterial, physical and chemical properties of AH Plus, BioRoot RCS and Pulp Canal Sealer (PCS) in contact with 2% chlorhexidine digluconate (CHX) used as final irrigant prior to root canal obturation.

METHODS

The antimicrobial properties were investigated by direct contact tests for planktonic and biofilm growth of E. faecalis, S. mutans, S.epidermidis and S.aureus in vitro. The setting time, wettability, microhardness and surface roughness were also assessed. The sealers were studied in no contact, 1-minute (short-term) and continuous contact (long-term) with CHX. Chemical characterization of sealers was performed by scanning electron microscopy, X-ray diffraction analysis and Fourier-transform infrared spectroscopy after CHX or saline used as the last irrigant in an ex vivo tooth model and in endo training blocks.

RESULTS

CHX increased the antibacterial activity of all the sealers investigated against planktonic bacteria and biofilms with PCS exerting the highest antimicrobial activity with and without the presence of CHX. The setting of AH Plus and BioRoot RCS was retarded, while for PCS accelerated in the presence of CHX. AH Plus and PCS were more hydrophilic after contact with CHX, whilst BioRoot RCS was hydrophobic in a time-dependent manner. The microhardness of sealers was compromised and the surface roughness increased after CHX exposure for AH Plus and BioRoot RCS, and decreased for PCS. CHX did not affect the sealers' chemistry, but PCS that exhibited two extra phases.

SIGNIFICANCE

CHX improved the antibacterial efficacy of endodontic sealers but further evidence is needed to confirm its suitability as a final irrigant prior to root canal obturation.

Immediate and Long-Term Porosity of Calcium Silicate-Based Sealers

INTRODUCTION

Open pores between endodontic sealer and root canal walls present potential niches for bacterial growth and migration pathways. The aim was to assess the internal and external porosity of calcium silicate-based sealers and to ascertain the long-term effect of storage in simulated body fluid on sealer porosity.

METHODS

Sixteen single-rooted teeth were filled with gutta-percha and 1 of 4 root canal sealers: BioRoot RCS, EndoSequence BC, MTA Fillapex, or AH Plus. Obturated roots, stored in Hank's balanced salt solution, were scanned after 7 days and after 6 months by using micro-computed tomography at an isotropic resolution of 9.9 μm. Total, open, and closed porosity were calculated in the coronal, middle, and apical thirds. Data were statistically analyzed by using general linear model and paired t test (α = 0.05).

RESULTS

Significantly higher percentage of open than closed porosity was found in all groups. Initially, significantly greater open and total porosity were found for MTA Fillapex than for AH Plus. After 6 months, the percentage of open and total porosity increased in BioRoot RCS and MTA Fillapex and decreased in AH Plus and EndoSequence BC. Both initially and after storage, coronal region of all sealers had significantly greater total porosity than middle and apical regions, which were comparable.

CONCLUSIONS

None of the root fillings were void-free, with predominant open porosity persisting after long-term storage.

Evaluation of the Sealing Ability of Three Obturation Techniques Using a Glucose Leakage Test

The aim of this study was to evaluate the sealing ability of three different canal filling techniques. Sixty-four roots of extracted human maxillary anterior teeth were prepared using ProTaper® rotary instruments. The specimens were then randomly divided into 3 experimental groups (n = 16) and 2 control groups (n = 8). The root canals were filled using cold lateral compaction (CLC group), continuous wave condensation technique using the Elements Obturation Unit® (EOU group), and ProTaper obturators (PT group). For the negative control group, 8 roots were filled using lateral compaction as in the CLC group, and the teeth were covered twice with a layer of nail varnish (NCG group). Another 8 roots were filled using lateral compaction, but without sealer, and these were used as the positive control (PCG group). A glucose leakage model was used for quantitative evaluation of microleakage for 24 hours and 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, and 12 weeks. No significant difference in the cumulative amount of leakage was found between the three experimental groups at all observation times. The lateral condensation of cold gutta-percha can guarantee a similar seal of canal fillings as can be achieved by using thermal methods, in the round canals.

Quantitative microleakage analysis of root canal filling materials in single-rooted canals

The purpose of this study was to analyze the sealing ability of different root canal filling materials over a 6-week period using a glucose penetration model. Forty-six recently extracted human premolars were used in this study. The root canals were enlarged to 40/0.06. Prepared canals were randomly assigned into four groups (n = 10) as follows: Group 1, Gutta-Percha (GP)/AH Plus with cold lateral compaction; Group 2, GP/AH Plus with continuous wave compaction; Group 3, RealSeal SE obturation system; and Group 4, OrthoMTA. The remaining specimens were used as positive and negative controls, and all specimens underwent thermocycling (10,000; 5-55 °C). The sealing ability of all samples was evaluated at 24 h, 1, 2, 4, and 6 weeks using a quantitative glucose leakage model, and scanning electron microscope (SEM) images were taken. A mixed effect analysis using R statistical language was performed. Groups 1, 2, and 4 showed low leakage levels during experimental periods. Group 3 showed low leakage levels for the first 2 weeks; however, the leakage level was significantly increased after 2 weeks compared to negative control group (p < 0.05). In the SEM results, Group 3 showed imperfect dentin bonding, whereas Group 4 showed calcium silicate hydrate short tags, which are formed at the access of the dentin tubules. GP/AH Plus and OrthoMTA showed less microleakage than RealSeal SE obturation system when used as root canal filling materials. Traditional GP/AH Plus sealer and the newly developed OrthoMTA are more appropriate for ideal sealing of the root canals.

Quantitative microleakage analysis of endodontic temporary filling materials using a glucose penetration model

OBJECTIVE

The purpose of this study was to analyze the sealing ability of different temporary endodontic materials over a 6-week period using a glucose penetration model.

MATERIALS AND METHODS

Standardized holes were formed on 48 dentin discs from human premolars. The thicknesses of the specimens were distributed evenly to 2 mm, 3 mm and 4 mm. Prepared dentin specimens were randomly assigned into six groups (n = 7) and the holes in the dentin specimens were filled with two kinds of temporary filling materials as per the manufacturers' instructions as follows: Caviton (GC Corporation, Tokyo, Japan) 2 mm, 3 mm, 4 mm and IRM (Dentsply International Inc., Milford, DE) 2 mm, 3 mm, 4 mm. The remaining specimens were used as positive and negative controls and all specimens underwent thermocycling (1000; 5-55°C). The sealing ability of all samples was evaluated using the leakage model for glucose. The samples were analyzed by a spectrophotometer in quantitative glucose microleakage test over a period of 6 weeks. As a statistical inference, a mixed effect analysis was applied to analyze serial measurements over time.

RESULTS

The Caviton groups showed less glucose penetration in comparison with the IRM groups. The Caviton 4 mm group demonstrated relatively low glucose leakage over the test period. High glucose leakage was detected throughout the test period in all IRM groups. The glucose leakage level increased after 1 week in the Caviton 2 mm group and after 4 weeks in the Caviton 3 mm and 4 mm groups (p < 0.05).

CONCLUSIONS

Caviton had better sealing ability than IRM in the glucose penetration model during 6 weeks. Temporary filling of Caviton to at least 3 mm in thickness is necessary and temporary filling periods should not exceed 4 weeks.

Resilon: a comprehensive literature review

Background and aims. An ideal root canal filling material should completely seal the entire root canal space and block communication between the root canal system and its surrounding tissues; it should also be nontoxic, noncarcinogenic, non-genotoxic, biocompatible, insoluble in tissue fluids and dimensionally stable. Bonding to dentin is a promising property, which can prevent leakage and improve the sealing ability of root canal filling materials. Resilon was developed and rec-ommended initially because the existing rootcanal filling materials did not bond to root canal dentin. Since its introduction in 2004, numerous reports have been published regarding various aspects of this material. The aim of this literature review is to present investigations regarding Resilon's physical and chemical properties and leakage studies. Materials and methods. A review of the literature was performed by using electronic and hand searching methods for Resilon from May 2004 to April 2012. Results. There are many published reports regarding Resilon. The searchshowed that Resilon is composed of a parent polymer, polycaprolactone or Tone, which is a biodegradable aliphatic polyester, with filler particles consisting of bioactive glass, bismuth oxychloride and barium sulfate. It possesses some antibacterial and antifungal properties. It is a promising material for root canal filling. Despite the presence of numerous case reports and case series regarding these applications, there are few designed research studies on clinical applications of this material. Resilon has some drawbacks such as high cost. Conclusion. Resilon seals well and is a biocompatible material. However, more clinical studies are needed to confirm its efficacy compared with other materials.

Root canal hydrophobization by dentinal silanization: improvement of silicon-based endodontic treatment tightness

A new strategy to improve silicon-based endodontic treatment tightness by dentine hydrophobization is presented in this work: root dentine was silanized to obtain a hydrophobic dentine-sealer interface that limits fluid penetration. This strategy was based on the grafting of aliphatic carbon chains on the dentine through a silanization with the silane end groups [octadecyltrichlorosilane (OTS) and octadecyltriethoxysilane]. Dentine surface was previously pretreated, applying ethylenediaminetetraacetic acid and sodium hypochlorite, to expose hydroxyl groups of collagen for the silane grafting. Collagen fibers exposure after pretreatment was visible with scanning electron microscopy, and Fourier transform infrared (FTIR) spectroscopy showed their correct exposition for the silanization (amide I and II, with 1630, 1580, and 1538 cm⁻¹ peaks corresponding to the vibration of C=O and C--N bonds). The grafting of aliphatic carbon chains was confirmed by FTIR (peaks at 2952 and 2923 cm⁻¹ corresponding to the stretching of C--H bonds) and by the increasing of the water contact angle. The most efficient hydrophobization was obtained with OTS in ethyl acetate, with a water contact angle turning from 51° to 109°. Gas and liquid permeability tests showed an increased seal tightness after silanization: the mean gas and water flows dropped from 2.02 × 10⁻⁸ to 1.62 × 10⁻⁸ mol s⁻¹ and from 10.8 × 10⁻³ to 5.4 × 10⁻³ µL min⁻¹, respectively. These results show clear evidences to turn hydrophilic dentine surface into a hydrophobic surface that may improve endodontic sealing.

Comparative analysis of leakage in root canal fillings performed with gutta-percha and Resilon cones with AH Plus and Epiphany sealers

OBJECTIVE

The aim of this study was to compare the leakage of root canal fillings of gutta-percha or Resilon cones in association with AH Plus or Epiphany sealer.

STUDY DESIGN

Four groups of premolars (n = 64) were instrumented to size 45/.04 ProFile and filled with laterally compacted gutta-percha cones or Resilon cones in association with AH Plus or Epiphany sealer. The specimens were stored for 2 weeks at 37 degrees C and 100% humidity. After that, leakage was measured using the fluid filtration method and determined as microL/min.10 psi.

RESULTS

Homogeneity of variance and multiple comparisons tests were performed and indicated that root fillings with the combination of gutta-percha cones and AH Plus sealer showed lower leakage values (P < .05) than the other groups.

CONCLUSION

Considering the experimental conditions and the results obtained, it was concluded that fillings made with gutta-percha cones in combination with AH Plus sealer had the best performance.

Microleakage of various root filling systems by glucose filtration analysis

OBJECTIVE

The aim of this study was to evaluate the microleakage of Resilon + Epiphany, EndoRez, Activ GP, and conventional AH Plus + gutta-percha technique using the glucose filtration model.

STUDY DESIGN

One hundred twenty maxillary incisors were divided into 5 experimental and 2 control groups. After root canal shaping, the experimental groups were filled with AH Plus + gutta-percha (lateral compaction), Resilon + Epiphany (lateral compaction), AH Plus + Protaper's proprietory cone, EndoRez + sealer, or Activ GP + sealer). The specimens were mounted on a glucose model and samples were taken for 3 weeks for leakage measurement.

RESULTS

No statistically significant difference was observed between the leakage of all groups at the 3 testing periods (P > .05).

CONCLUSION

The filling materials with the monoblock concept do not seem to be superior to the conventional AH Plus + gutta-percha system regarding microleakage.

Glucose reactivity with filling materials as a limitation for using the glucose leakage model

AIM

To evaluate the reactivity of different endodontic materials and sealers with glucose and to asses the reliability of the glucose leakage model in measuring penetration of glucose through these materials.

METHODOLOGY

Ten uniform discs (radius 5 mm, thickness 2 mm) were made of each of the following materials: Portland cement, MTA (grey and white), sealer 26, calcium sulphate, calcium hydroxide [Ca(OH)(2)], AH26,Epiphany, Resilon, gutta-percha and dentine. After storing the discs for 1 week at 37 degrees C and humid conditions, they were immersed in 0.2 mg mL(-1) glucose solution in a test tube. The concentration of glucose was evaluated using an enzymatic reaction after 1 week. Statistical analysis was performed with the anova and Dunnett tests at a significant level of P < 0.05.

RESULTS

Portland cement, MTA, Ca(OH)(2) and sealer 26 reduced the concentration in the test tube of glucose significantly after 1 week (P < 0.05). Calcium sulphate reduced the concentration of glucose, but the difference in concentrations was not significant (P = 0.054).

CONCLUSIONS

Portland cement, MTA, Ca(OH)(2) and sealer 26 react with a 0.2 mg mL(-1) glucose solution. Therefore, these materials should not be evaluated for sealing ability with the glucose leakage model.

Antibacterial properties of four endodontic sealers

The purpose of this study was to evaluate the antimicrobial effects of root canal sealers. The direct contact test (DCT) was used to assess the antibacterial properties of AH plus, Apexit Plus, Epiphany SE, and RoekoSeal when in contact with Enterococcus faecalis. The materials were examined immediately after setting and 1, 2, 7, and 14 days after aging in phosphate-buffered-saline. Statistical analysis with two-way analysis of variance, one-way analysis of variance, and Tukey multiple comparison was applied to the data. Apexit Plus had a short-term antibacterial effect of 1 day on E. faecalis, whereas Epiphany SE enhanced bacterial growth for at least 7 days. AH plus and RoekoSeal were ineffective.