A tilting device for three-dimensional microscopy: application to in situ imaging of interphase cell nuclei

Three-dimensional quantitative phase imaging via tomographic deconvolution phase microscopy

The field of three-dimensional quantitative phase imaging (3D QPI) is expanding rapidly with applications in biological, medical, and industrial research, development, diagnostics, and metrology. Much of this research has centered on developing optical diffraction tomography (ODT) for biomedical applications. In addition to technical difficulties associated with coherent noise, ODT is not congruous with optical microscopy utilizing partially coherent light, which is used in most biomedical laboratories. Thus, ODT solutions have, for the most part, been limited to customized optomechanical systems which would be relatively expensive to implement on a wide scale. In the present work, a new phase reconstruction method, called tomographic deconvolution phase microscopy (TDPM), is described which makes use of commercial microscopy hardware in realizing 3D QPI. TDPM is analogous to methods used in deconvolution microscopy which improve spatial resolution and 3D-localization accuracy of fluorescence micrographs by combining multiple through-focal scans which are deconvolved by the system point spread function. TDPM is based on the 3D weak object transfer function theory which is shown here to be capable of imaging "nonweak" phase objects with large phase excursions. TDPM requires no phase unwrapping and recovers the entire object spectrum via object rotation, mitigating the need to fill in the "missing cone" of spatial frequencies algorithmically as in limited-angle ODT. In the present work, TDPM is demonstrated using optical fibers, including single-mode, polarization-maintaining, and photonic-crystal fibers as well as an azimuthally varying CO2-laser-induced long-period fiber grating period as test phase objects.

Micro axial tomography: a miniaturized, versatile stage device to overcome resolution anisotropy in fluorescence light microscopy

With the development of novel fluorescence techniques, high resolution light microscopy has become a challenging technique for investigations of the three-dimensional (3D) micro-cosmos in cells and sub-cellular components. So far, all fluorescence microscopes applied for 3D imaging in biosciences show a spatially anisotropic point spread function resulting in an anisotropic optical resolution or point localization precision. To overcome this shortcoming, micro axial tomography was suggested which allows object tilting on the microscopic stage and leads to an improvement in localization precision and spatial resolution. Here, we present a miniaturized device which can be implemented in a motor driven microscope stage. The footprint of this device corresponds to a standard microscope slide. A special glass fiber can manually be adjusted in the object space of the microscope lens. A stepwise fiber rotation can be controlled by a miniaturized stepping motor incorporated into the device. By means of a special mounting device, test particles were fixed onto glass fibers, optically localized with high precision, and automatically rotated to obtain views from different perspective angles under which distances of corresponding pairs of objects were determined. From these angle dependent distance values, the real 3D distance was calculated with a precision in the ten nanometer range (corresponding here to an optical resolution of 10-30 nm) using standard microscopic equipment. As a proof of concept, the spindle apparatus of a mature mouse oocyte was imaged during metaphase II meiotic arrest under different perspectives. Only very few images registered under different rotation angles are sufficient for full 3D reconstruction. The results indicate the principal advantage of the micro axial tomography approach for many microscopic setups therein and also those of improved resolutions as obtained by high precision localization determination.

Multi-view image fusion improves resolution in three-dimensional microscopy

A non-blind, shift-invariant image processing technique that fuses multi-view three-dimensional image data sets into a single, high quality three-dimensional image is presented. It is effective for 1) improving the resolution and isotropy in images of transparent specimens, and 2) improving the uniformity of the image quality of partially opaque samples. This is demonstrated with fluorescent samples such as Drosophila melanogaster and Medaka embryos and pollen grains imaged by Selective Plane Illumination Microscopy (SPIM). The application of the algorithm to SPIM data yields high-resolution images of organ structure and gene expression, in some cases at a sub-cellular level, throughout specimens ranging from several microns up to a millimeter in size.

Automated microaxial tomography of cell nuclei after specific labelling by fluorescence in situ hybridisation

Microaxial tomography provides a good means for microscopic image acquisition of cells or sub-cellular components like cell nuclei with an improved resolution, because shortcomings of spatial resolution anisotropy in optical microscopy can be overcome. Thus, spatial information of the object can be obtained without the necessity of confocal imaging. Since the very early developments of microaxial tomography, a considerable drawback of this method was a complicated image acquisition and processing procedure that requires much operator time. In order to solve this problem the Heidelberg 2pi-tilting device has been mounted on the Brno high-resolution cytometer as an attempt to bring together advanced microscopy and fast automated computer image acquisition and analysis. A special software module that drives all hardware components required for automated microaxial tomography and performs image acquisition and processing has been developed. First, a general image acquisition strategy is presented. Then the procedure for automation of axial tomography and the developed software module are described. The rotation precision has been experimentally proved followed by experiments with a specific biological example. For this application, also a method for the preparation of cell nuclei attached to glass fibres has been developed that allows for the first time imaging of three-dimensionally conserved, fluorescence in situ hybridisation-stained cell nuclei fixed to a glass fibre.

Precise 3D image alignment in micro-axial tomography

Micro (micro-) axial tomography is a challenging technique in microscopy which improves quantitative imaging especially in cytogenetic applications by means of defined sample rotation under the microscope objective. The advantage of micro-axial tomography is an effective improvement of the precision of distance measurements between point-like objects. Under certain circumstances, the effective (3D) resolution can be improved by optimized acquisition depending on subsequent, multi-perspective image recording of the same objects followed by reconstruction methods. This requires, however, a very precise alignment of the tilted views. We present a novel feature-based image alignment method with a precision better than the full width at half maximum of the point spread function. The features are the positions (centres of gravity) of all fluorescent objects observed in the images (e.g. cell nuclei, fluorescent signals inside cell nuclei, fluorescent beads, etc.). Thus, real alignment precision depends on the localization precision of these objects. The method automatically determines the corresponding objects in subsequently tilted perspectives using a weighted bipartite graph. The optimum transformation function is computed in a least squares manner based on the coordinates of the centres of gravity of the matched objects. The theoretically feasible precision of the method was calculated using computer-generated data and confirmed by tests on real image series obtained from data sets of 200 nm fluorescent nano-particles. The advantages of the proposed algorithm are its speed and accuracy, which means that if enough objects are included, the real alignment precision is better than the axial localization precision of a single object. The alignment precision can be assessed directly from the algorithm's output. Thus, the method can be applied not only for image alignment and object matching in tilted view series in order to reconstruct (3D) images, but also to validate the experimental performance (e.g. mechanical precision of the tilting). In practice, the key application of the method is an improvement of the effective spatial (3D) resolution, because the well-known spatial anisotropy in light microscopy can be overcome. This allows more precise distance measurements between point-like objects.

Validation of image processing tools for 3-D fluorescence microscopy

3-D optical fluorescent microscopy becomes nowadays an efficient tool for volumic investigation of living biological samples. Using optical sectioning technique, a stack of 2-D images is obtained. However, due to the nature of the system optical transfer function and non-optimal experimental conditions, acquired raw data usually suffer from some distortions. In order to carry out biological analysis, raw data have to be restored by deconvolution. The system identification by the point-spread function is useful to obtain the knowledge of the actual system and experimental parameters, which is necessary to restore raw data. It is furthermore helpful to precise the experimental protocol. In order to facilitate the use of image processing techniques, a multi-platform-compatible software package called VIEW3D has been developed. It integrates a set of tools for the analysis of fluorescence images from 3-D wide-field or confocal microscopy. A number of regularisation parameters for data restoration are determined automatically. Common geometrical measurements and morphological descriptors of fluorescent sites are also implemented to facilitate the characterisation of biological samples. An example of this method concerning cytogenetics is presented.

Linear measurements in 2-dimensional pelvic floor imaging: the impact of slice tilt angles on measurement reproducibility

OBJECTIVE

Magnetic resonance imaging techniques have improved the study of female pelvic dysfunction. However, disagreements between magnetic resonance measurements and their derived 3-dimensional reconstructions were noted. We tested the hypothesis that these discrepancies stemmed from variations in magnetic resonance acquisition angle.

STUDY DESIGN

Images from the pelvis of the Visible Human Female (a thinly sliced cadaveric image data set) were obtained. Slices in the axial plane were rotated around pivot points in the pelvis to yield a set of similar-appearing para-axial images. A parameter that described the maximum anterior-posterior dimension of the levator hiatus was defined. This levator hiatus parameter was measured on all of the rotated images and compared with an expected value that was calculated from trigonometry. The levator hiatus was also measured on a group of similar-appearing slices rotated slightly around a defined point.

RESULTS

In 1 group of slices, expected levator hiatus variation was 1.5 to 6.1%, whereas measured variation was 4% to 15%. Among the similar-appearing rotated slices, 4.8% to 16.0% variations were seen in the levator hiatus.

CONCLUSION

Identical measurements made on radiologic images can vary widely. Slice acquisition must be standardized to avoid errors in data comparison.

Nuclear architecture and the induction of chromosomal aberrations

Progress in fluorescence in situ hybridization, three dimensional microscopy and image analysis has provided the means to study the three-dimensional structure and distribution of chromosome territories within the cell nucleus. In this contribution, we summarize the present state of knowledge of the territorial organization of interphase chromosomes and their topological relationships with other macromolecular domains in the human cell nucleus, and present data from computer simulations of chromosome territory distributions. On this basis, we discuss models of chromosome territory and nuclear architecture and topological consequences for the formation of chromosome exchanges.

Application of confocal laser microscopy and three-dimensional Voronoi diagrams for volume and surface estimates of interphase chromosomes

This study demonstrates the use of Voronoi tessellation procedures to obtain quantitative morphological data for chromosome territories in the cell nucleus. As a model system, chromosomes 7 and X were visualized in human female amniotic fluid cell nuclei by chromosomal in situ suppression hybridization with chromosome-specific composite probes. Light optical serial sections of 18 nuclei were obtained with a confocal scanning laser fluorescence microscope. A three-dimensional (3-D) tessellation of the image volumes defined by the stack of serial sections was then performed. For this purpose a Voronoi diagram, which consists of convex polyhedra structured in a graph environment, was built for each nucleus. The chromosome territories were extracted by applying the Delaunay graph, the dual of the Voronoi diagram, which describes the neighbourhood in the Voronoi diagram. The chromosome territories were then described by three morphological parameters, i.e. volume, surface area and a roundness factor (shape factor). The complete evaluation of a nucleus, including the calculation of the Voronoi diagram, 3-D visualization of extracted territories using computer graphic methods and parameterization was carried out on a Silicon Graphics workstation and was generally completed within 5 min. The geometric information obtained by this procedure revealed that both X- and 7-chromosome territories were similar in volume. Roundness factors indicated a pronounced variability in interphase shape for both pairs of chromosomes. Surface estimates showed a significant difference between the two X-territories but not between chromosome 7-territories.

Rapid fluorescence in situ hybridization with repetitive DNA probes: quantification by digital image analysis

Fluorescence in situ hybridization (FISH) has become an important tool not only in cytogenetic research but also in routine clinical chromosome diagnostics. Here, results of a quantification of fluorescence signals after in situ hybridization with repetitive DNA probes are reported using a non-enzymatic hybridization technique working with a buffer system not containing any formamide or equivalent chemical denaturing agents. Following simultaneous denaturation of both cells and DNA probes, the renaturation time was reduced to less than 30 min. For one of the DNA probes reasonable FISH-signals were even achieved after about 30 s renaturation time. In addition, the number of washing steps was reduced drastically. As a model system, two repetitive DNA probes (pUC 1.77, D15Z1) were hybridized to human metaphase spreads and interphase nuclei obtained from peripheral blood lymphocytes. The probes were labelled with digoxigenin and detected by FITC-anti-digoxigenin. The hybridization time was reduced step by step and the resulting fluorescence signals were examined systematically. For comparison the pUC 1.77 probe was also hybridized according to a FISH protocol containing 50% formamide. By renaturation for 2 h and overnight two FISH signals per nucleus were obtained. Using shorter renaturation times, no detectable FISH signals were observed. Quantification of the FISH signals was performed using a fluorescence microscope equipped with a cooled colour charge coupled device (CCD) camera. Image analysis was made interactively using a commercially available software package running on a PC (80486). For the pUC 1.77 probe the major binding sites (presumptive chromosomes 1) were clearly distinguished from the minor binding sites by means of the integrated fluorescence intensity. For the two (pUC 1.77) or four (D15Z1) brightest spots on the metaphase spreads and in the interphase nuclei hybridized without formamide, integrated fluorescence intensity distributions were measured for different renaturation times (0.5, 15, 30 min). The intra-nuclear variation in the intensity of the two brightest in situ hybridization spots appeared to be slightly higher (CV between 16 and 32%) than the corresponding variation in the metaphase spreads (CV between 10 and 19%). For the D15Z1 probe FISH signals were detected after hybridization without formamide and 15 min and 30 min renaturation. Always four bright spots were visible and tentatively assigned on the metaphase spreads (presumptive chromosome 15 and 9). The intensity variation of each pair of homologues in a metaphase spread showed a CV of 14 or 15%, respectively, for the presumptive chromosome 15, and 8 or 9%, respectively, for the presumptive chromosome 9.

Evidence for a nuclear compartment of transcription and splicing located at chromosome domain boundaries

The nuclear topography of splicing snRNPs, mRNA transcripts and chromosome domains in various mammalian cell types are described. The visualization of splicing snRNPs, defined by the Sm antigen, and coiled bodies, revealed distinctly different distribution patterns in these cell types. Heat shock experiments confirmed that the distribution patterns also depend on physiological parameters. Using a combination of fluorescence in situ hybridization and immunodetection protocols, individual chromosome domains were visualized simultaneously with the Sm antigen or the transcript of an integrated human papilloma virus genome. Three-dimensional analysis of fluorescence-stained target regions was performed by confocal laser scanning microscopy. RNA transcripts and components of the splicing machinery were found to be generally excluded from the interior of the territories occupied by the individual chromosomes. Based on these findings we present a model for the functional compartmentalization of the cell nucleus. According to this model the space between chromosome domains, including the surface areas of these domains, defines a three-dimensional network-like compartment, termed the interchromosome domain (ICD) compartment, in which transcription and splicing of mRNA occurs.