Genetic and phenotypic parameters for conformation and yield traits in three Swiss dairy cattle breeds

Body conformation traits in early-lactation associated with clinical mastitis and lameness in lactating Chinese holstein cows

BACKGROUND

Comprehending the correlation between body conformation traits of cows at the early stages of lactation and prevalent lactation diseases might facilitate the execution of selection and feeding strategies that prioritize cow health. This study aimed to evaluate the impact of body conformation traits on the incidence of clinical mastitis and lameness in Chinese Holstein cows. From a pasture herd of 1472 early lactating Chinese Holstein cows, we evaluated 20 body conformation traits. During lactation, this pasture herd was visited weekly to gather clinical mastitis and lameness data. A nine-point scale was used to determine the conformation traits of cows to clarify their linear characters, including frame capacity, rump (RU), feet and leg (FL), mammary system (MS), and dairy character. A longitudinal binary disease (0 = healthy; 1 = diseased) data structure was created by allocating disease records to adjacent official test dates. The impact of body conformation traits on the risk of developing diseases (clinical mastitis and lameness) was analyzed using the logistic regression models.

RESULTS

Compared to cows with low total scores (75-79 points), those with high total scores (80-85 points) of body conformation traits had a significantly lower risk of mastitis (P < 0.001). The disease status (0 or 1: binary variable) of clinical mastitis in lactating cows was significantly impacted negatively by age (P < 0.05). The fore udder attachment (FUA), angularity, rear attachment height (RAH), and rear teat placement (RTP) were all significantly associated with clinical mastitis during lactation (P < 0.05). The rear leg-rear view (RLRV) was significantly correlated with correlated considerably (P < 0.05) with lameness during lactation. An ideal score of four points on the lameness risk dimension of the RLRV may indicate a low risk of lameness. Since the risk of mastitis decreased as this trait score increased, the RTP may be an ideal marker for mastitis risk.

CONCLUSIONS

According to the study, clinical mastitis and lameness risks in cows can be estimated using their body conformation traits. Cows with more centrally located rear teats have a lower risk of mastitis. These results may help dairy farmers identify cows at high risk of disease early in lactation and aid in breeding for disease resistance in cows.

Genetic Parameters for Functional Longevity, Type Traits, and Production in the Serbian Holstein

In this study, the authors focused on the evaluation of the genetic parameters of longevity, milk yield traits, and type traits in dairy cattle populations in the Republic of Serbia. The total dataset used consisted of production records and pedigree data for 32,512 Holstein cows that calved from 1981 to 2015. The animal model was applied to determine the variance and covariance components and genetic parameters of the analyzed traits by applying the restricted maximum likelihood (REML) approach and using the programs VCE6 and PEST. The heritability of longevity traits was estimated using the Survival Kit V6.0 software package. Variance and covariance were estimated for five production traits: milk yield (MY), fat yield (FY), protein yield (PY), milk fat content (MC), and protein content (PC), and three longevity traits: length of productive life (LPL), lifetime milk yield (LMY), and the number of lactations achieved (NL) as well as for 18 standard type traits. Heritabilities for the milk, fat, and protein yield traits were 0.20 (MY), 0.15 (FY), and 0.19 (PY), respectively. The estimated coefficients of heritability for the longevity traits were higher when using the Weibull proportional hazards model compared to the traditional linear methods and ranged from 0.08 for NL to 0.10 for LPL. Heritability values for the type traits varied from a low of 0.10 (RLSsv-rear legs set-side view) to medium values of 0.32 (ST-stature). Genetic correlations were found between MY and the following longevity traits: LPL, LMY, and NL with values of -0.18, -0.11, and -0.09, respectively. Genetic correlations were found between MY and a number of linear type traits and varied from 0.02 (between MY and RUH-rear udder height) to 0.28 (between MY and FUA-fore udder attachment). Genetic correlations between the 18 investigated type traits ranged from -0.33 between TL (top line) and RTP (rear teats position) to 0.71 between AN (angularity) and RUH (rear udder height). Genetic correlations between most linear type traits and longevity traits (LPL, LMY, and NL) were generally negative and very low. The highest positive genetic correlation was found between UD and LPL (r_xy = 0.38).

Genetic analysis of production traits and body size measurements and their relationships with metabolic diseases in German Holstein cattle

This study sheds light on the genetic complexity and interplay of production, body size, and metabolic health in dairy cattle. Phenotypes for body size-related traits from conformation classification (130,166 animals) and production (101,562 animals) of primiparous German Holstein cows were available. Additionally, 21,992, 16,641, and 7,096 animals were from herds with recordings of the metabolic diseases ketosis, displaced abomasum, and milk fever in first, second, and third lactation. Moreover, all animals were genotyped. Heritabilities of traits and genetic correlations between all traits were estimated and GWAS were performed. Heritability was between 0.240 and 0.333 for production and between 0.149 and 0.368 for body size traits. Metabolic diseases were lowly heritable, with estimates ranging from 0.011 to 0.029 in primiparous cows, from 0.008 to 0.031 in second lactation, and from 0.037 to 0.052 in third lactation. Production was found to have negative genetic correlations with body condition score (BCS; -0.279 to -0.343) and udder depth (-0.348 to -0.419). Positive correlations were observed for production and body depth (0.138-0.228), dairy character (DCH) (0.334-0.422), and stature (STAT) (0.084-0.158). In first parity cows, metabolic disease traits were unfavorably correlated with production, with genetic correlations varying from 0.111 to 0.224, implying that higher yielding cows have more metabolic problems. Genetic correlations of disease traits in second and third lactation with production in primiparous cows were low to moderate and in most cases unfavorable. While BCS was negatively correlated with metabolic diseases (-0.255 to -0.470), positive correlations were found between disease traits and DCH (0.269-0.469) as well as STAT (0.172-0.242). Thus, the results indicate that larger and sharper animals with low BCS are more susceptible to metabolic disorders. Genome-wide association studies revealed several significantly associated SNPs for production and conformation traits, confirming previous findings from literature. Moreover, for production and conformation traits, shared significant signals on Bos taurus autosome (BTA) 5 (88.36 Mb) and BTA 6 (86.40 to 87.27 Mb) were found, implying pleiotropy. Additionally, significant SNPs were observed for metabolic diseases on BTA 3, 10, 14, 17, and 26 in first lactation and on BTA 2, 6, 8, 17, and 23 in third lactation. Overall, this study provides important insights into the genetic basis and interrelations of relevant traits in today's Holstein cattle breeding programs, and findings may help to improve selection decisions.

Estimation of Genetic Parameters for Conformation Traits and Milk Production Traits in Chinese Holsteins

The objective of this study was to explore the genetic parameters of conformation traits and milk production traits in Chinese Holstein cattle and to provide a reference for dairy cattle breeding. We collected the phenotypic data of 23 conformation traits and five milk production traits of Chinese Holsteins and used animal models to estimate the genetic parameters of conformation traits and milk production traits. The estimated heritability of conformation traits ranged from 0.11 (angularity) to 0.37 (heel depth) and the genetic correlation between conformation traits ranged from -0.73 (bone quality and rear leg-rear view) to 0.76 (chest width and loin strength). The heritability of milk production traits ranged from 0.23 (somatic cell score) to 0.50 (305-d milk yield). The estimated values of genetic correlation between conformation traits and milk production traits ranged from -0.56 (heel depth and 305-d milk yield) to 0.57 (udder texture and milk fat percentage). There was a positive genetic correlation between most conformation traits and milk fat percentage, but a weak negative genetic correlation with milk yield. Strengthening the moderately and highly heritable milk production and conformation traits, especially the selection of rear udder traits and body shape total score, will be beneficial in improving the performance of dairy cows.

Identification of Genetic Effects of ACADVL and IRF6 Genes with Milk Production Traits of Holstein Cattle in China

With the development of high-throughput sequencing, RNA sequencing has been widely used in the identification of candidate genes for complex traits in livestock, and the functional genes and mutations with large genetic effects on milk production traits can provide molecular information for marker-assisted selection to increase the selection accuracy and accelerate genetic gain in dairy cattle. Our previous study on the liver transcriptome of Holstein cows found that acyl-CoA dehydrogenase (ACADVL) and interferon regulatory factor 6 (IRF6) are differentially expressed between dry and peak lactation periods, as well as that they are involved in lipid metabolism and the proliferation and differentiation of mammary epithelial cells. Thus, the two genes were considered candidates for milk traits. Hence, this study further collected 1186 Holstein cows from 110 sire families to investigate their genetic associations with milk yield and composition traits. By resequencing the entire exons and 2000 bp of the 5' and 3' flanking regions of the two genes, we identified eight SNPs in ACADVL and eight SNPs in IRF6. Subsequent single-locus association analyses showed that the eight SNPs in ACADVL were all significantly associated with milk fat yield, fat percentage, and protein yield (p values ≤ 0.0001-0.0414), and the eight SNPs in IRF6 were associated with milk, fat, and protein yields in the first or second lactation (p values ≤ 0.0001-0.0467). Using Haploview 4.2, one haplotype block with eight of the SNPs in ACADVL (D' = 0.99-1.00) and two haplotype blocks in IRF6 with three of the SNPs in each were observed (D' = 0.98-1.00). Similarly, the haplotype combinations of ACADVL were significantly associated with milk yield, fat percentage, fat yield, and protein yield in the two lactations (p values ≤ 0.0001-0.0125), and those of IRF6 were associated with five milk traits (p values ≤ 0.0001-0.0263). Furthermore, with the JASPAR software, it was predicted that the SNPs 19:g.26933503T>C in ACADVL and 16:g.73501985G>A in IRF6 changed the transcription factor binding sites of ZEB1, PLAGL2, and RHOXF1, implying their impacts on the expressions of the corresponding genes. Our findings demonstrated that the ACADVL and IRF6 genes have significant genetic effects on milk yield and composition traits, and the valuable SNPs might be used as genetic markers for genomic selection programs in dairy cattle.

Bull fertility and semen quality are not correlated with dairy and production traits in Brown Swiss cattle

Undisturbed reproduction is key for successful breeding of beef and dairy cattle. Improving reproductive ability can be difficult because of antagonistic relationships with other economically relevant traits. In cattle, thorough investigation of female fertility revealed unfavorable genetic correlations with various production phenotypes. However, the correlation between male reproductive ability and production traits remains poorly understood. Here, we investigated the genetic relationships among and between male fertility characteristics and economically relevant traits in a population of Brown Swiss cattle. We performed GWAS with imputed genotypes at nearly 12 million sequence variants for semen quality (sperm head and tail anomalies, motility, concentration, and volume), male fertility, and 57 production phenotypes. Allele substitution effects were then correlated on a trait-by-trait basis to estimate genetic correlations. Correlations between male reproductive characteristics and traits of economic value were small and ranged from -0.0681 to 0.0787. Among the semen quality parameters, sperm motility was negatively correlated with anomalies (head: r = -0.7083 ± 0.0002; tail: r = -0.7739 ± 0.0002) and volume (r = -0.1266 ± 0.0003), whereas volume was negatively correlated with concentration (r = -0.3503 ± 0.0002). Sire nonreturn rate was negatively correlated with sperm anomalies (head: r = -0.1640 ± 0.0002; tail: r = -0.1580 ± 0.0002) and positively correlated with motility (r = 0.1598 ± 0.0002). A meta-analysis of male reproductive traits identified 2 quantitative trait loci: a previously described region on chromosome 6 showed pleiotropic effects and a novel region on chromosome 11 was associated with sperm head anomalies. In conclusion, our results suggest that selection for economically important dairy and production phenotypes has little impact on semen quality and fertility of Brown Swiss bulls.

Estimation of Genetic Parameters of Type Traits in First Parity Cows of the Autochthonous Cika Cattle in Slovenia

The aim of this study was to estimate genetic parameters of 26 individual and four composite type traits in first parity Cika cows. An analysis of variance was performed with the generalized linear model procedure of the SAS/STAT statistical package, where the fixed effects of year of recording, cow's age at recording and days after calving as a linear regression were included in the model. The variance components for the direct additive genetic effect and the herd effect in all type traits were estimated using the REML method in the VCE-6 software package. The estimated heritabilities ranged from 0.42 to 0.67 for the measured body frame traits, from 0.36 to 0.80 for the scored autochthonous traits, from 0.11 to 0.61 for the scored body frame traits, and from 0.20 to 0.47 for the scored udder traits. The estimated heritabilities for the composite traits called "autochthonous characteristics", "muscularity", "body frame" and "udder" were 0.55, 0.19, 0.19, and 0.26, respectively. The estimated genetic correlations among the measured body frame traits were positive and high, while the majority of them among the scored body frame traits were low to moderate. The estimated proportions of variance explained by the herd effect for the composite traits "autochthonous characteristics," "muscularity," "body frame" and "udder" were 0.09, 0.28, 0.14, and 0.10, respectively. The estimated heritabilities for the type traits of first parity Cika cows were similar to those reported for other breeds where breeding values have been routinely predicted for a long time. All estimated genetic parameters are already used for breeding value prediction in the Cika cattle population.

Genomic Prediction in Local Breeds: The Rendena Cattle as a Case Study

Simple Summary

Although genomic selection is being used in many livestock species, it has not yet been considered in local breeds due to the lower population size and the potential less effective impact on the genetic evaluation of these breeds. The current research aims to investigate how genomic data can impact the accuracy of genetic predictions for beef traits in Rendena, a small local cattle breed of the North-East of Italy selected for a dual purpose. Classical animal models using only phenotypic information were compared with two models that integrated genomic data with pedigree information. The genomic models presented better accuracy in estimated breeding values of the animals than the ‘classical’ animal model, especially the ‘simpler’ one assuming homogeneous variances of single nucleotide polymorphisms. Our results show that the inclusion of genomic information can be successfully applied to breeding selection scenarios even in small local cattle breeds such as Rendena.

Abstract

The maintenance of local cattle breeds is key to selecting for efficient food production, landscape protection, and conservation of biodiversity and local cultural heritage. Rendena is an indigenous cattle breed from the alpine North-East of Italy, selected for dual purpose, but with lesser emphasis given to beef traits. In this situation, increasing accuracy for beef traits could prevent detrimental effects due to the antagonism with milk production. Our study assessed the impact of genomic information on estimated breeding values (EBVs) in Rendena performance-tested bulls. Traits considered were average daily gain, in vivo EUROP score, and in vivo estimate of dressing percentage. The final dataset contained 1691 individuals with phenotypes and 8372 animals in pedigree, 1743 of which were genotyped. Using the cross-validation method, three models were compared: (i) Pedigree-BLUP (PBLUP); (ii) single-step GBLUP (ssGBLUP), and (iii) weighted single-step GBLUP (WssGBLUP). Models including genomic information presented higher accuracy, especially WssGBLUP. However, the model with the best overall properties was the ssGBLUP, showing higher accuracy than PBLUP and optimal values of bias and dispersion parameters. Our study demonstrated that integrating phenotypes for beef traits with genomic data can be helpful to estimate EBVs, even in a small local breed.

Selection Response Due to Different Combination of Antagonistic Milk, Beef, and Morphological Traits in the Alpine Grey Cattle Breed

Selection in local dual-purpose breeds requires great carefulness because of the need to preserve peculiar traits and also guarantee the positive genetic progress for milk and beef production to maintain economic competitiveness. A specific breeding plan accounting for milk, beef, and functional traits is required by breeders of the Alpine Grey cattle (AG), a local dual-purpose breed of the Italian Alps. Hereditability and genetic correlations among all traits have been analyzed for this purpose. After that, different selection indexes were proposed to identify the most suitable for this breed. Firstly, a genetic parameters analysis was carried out with different datasets. The milk dataset contained 406,918 test day records of milk, protein, and fat yields and somatic cells (expressed as SCS). The beef dataset included performance test data conducted on 749 young bulls. Average daily gain, in vivo estimated carcass yields, and carcass conformation (SEUROP) were the phenotypes obtained from the performance tests. The morphological dataset included 21 linear type evaluations of 11,320 first party cows. Linear type traits were aggregated through factor analysis and three factors were retained, while head typicality (HT) and rear muscularity (RM) were analyzed as single traits. Heritability estimates (h2) for milk traits ranged from 0.125 to 0.219. Analysis of beef traits showed h2 greater than milk traits, ranging from 0.282 to 0.501. Type traits showed a medium value of h2 ranging from 0.238 to 0.374. Regarding genetic correlation, SCS and milk traits were strongly positively correlated. Milk traits had a negative genetic correlation with the factor accounting for udder conformations (-0.40) and with all performance test traits and RM. These latter traits showed also a negative genetic correlation with udder volume (-0.28). The HT and the factor accounting for rear legs traits were not correlated with milk traits, but negatively correlated with beef traits (-0.32 with RM). We argue that the consequence of these results is that the use of the current selection index, which is mainly focused on milk attitude, will lead to a deterioration of all other traits. In this study, we propose more appropriate selection indexes that account for genetic relationships among traits, including functional traits.

Analyses of the genetic relationships between lactose, somatic cell score, and growth traits in Simmental cattle

Lactose and somatic cell score (SCS) are major economic traits of milk. However, for many countries, they are typically not directly considered in the national genetic evaluation of Simmental cattle. This study aimed to estimate the genetic relationships between lactose, SCS, and growth traits of Simmental cattle to provide information for the national genetic evaluation of the selection of traits of this cattle population. The data of 1781 animals with 6519 records obtained over a period of 41 years (1975-2016) were collected from Xinjiang Hutubi Farm, China. The analyzed traits included 305 days of milk yield (305MY), milk fat percentage (MFP), milk protein percentage (MPP), milk lactose percentage (MLP), total solids (TS), SCS, body height (BH), body length (BL), chest girth (CG), abdominal circumference (AC), rump width (RW), rump length (RL), leg circumference (LC), and cannon circumference (CC). The multiple-trait repeatability model was adopted to estimate (co)variance components using the average information-restricted maximum likelihood method implemented using the DMU statistical package. The heritability estimates for milk components and growth traits ranged from 0.09 (SCS) to 0.51 (BH). Genetic correlations for milk components ranged from 0.03 ± 0.14 (MFP and MLP) to 0.81 ± 0.08 (MFP and MPP). Genetic correlation between MLP and SCS was moderate and negative (-0.50 ± 0.15) compared with that among other traits. Genetic correlations between the milk components and growth traits ranged from 0.00 ± 0.07 (305MY and RW) to -0.64 ± 0.15 (MLP and BL). Genetic correlations of BL, LC, RW, and RL with MLP were moderate to high and negative ranging from -0.39 to -0.64. Somatic cell score showed the highest correlation with BL (0.41) followed by LC (0.21). An increase in MLP would result in an increase in 305MY or TS and a decrease in BL, LC, RW, and RL. Additionally, a decrease in SCS would occur with the selection of increased MLP and reduced BL. We conclude that selection based on easily and inexpensively measured growth traits could improve the milk quality from Simmental cattle.

A multi-breed GWAS for morphometric traits in four Beninese indigenous cattle breeds reveals loci associated with conformation, carcass and adaptive traits

BACKGROUND

Specific adaptive features including disease resistance and growth abilities in harsh environments are attributed to indigenous cattle breeds of Benin, but these breeds are endangered due to crossbreeding. So far, there is a lack of systematic trait recording, being the basis for breed characterizations, and for structured breeding program designs aiming on conservation. Bridging this gap, own phenotyping for morphological traits considered measurements for height at withers (HAW), sacrum height (SH), heart girth (HG), hip width (HW), body length (BL) and ear length (EL), including 449 cattle from the four indigenous Benin breeds Lagune, Somba, Borgou and Pabli. In order to utilize recent genomic tools for breed characterizations and genetic evaluations, phenotypes for novel traits were merged with high-density SNP marker data. Multi-breed genetic parameter estimations and genome-wide association studies (GWAS) for the six morphometric traits were carried out. Continuatively, we aimed on inferring genomic regions and functional loci potentially associated with conformation, carcass and adaptive traits.

RESULTS

SNP-based heritability estimates for the morphometric traits ranged between 0.46 ± 0.14 (HG) and 0.74 ± 0.13 (HW). Phenotypic and genetic correlations ranged from 0.25 ± 0.05 (HW-BL) to 0.89 ± 0.01 (HAW-SH), and from 0.14 ± 0.10 (HW-BL) to 0.85 ± 0.02 (HAW-SH), respectively. Three genome-wide and 25 chromosome-wide significant SNP positioned on different chromosomes were detected, located in very close chromosomal distance (±25 kb) to 15 genes (or located within the genes). The genes PIK3R6 and PIK3R1 showed direct functional associations with height and body size. We inferred the potential candidate genes VEPH1, CNTNAP5, GYPC for conformation, growth and carcass traits including body weight and body fat deposition. According to their functional annotations, detected potential candidate genes were associated with stress or immune response (genes PTAFR, PBRM1, ADAMTS12) and with feed efficiency (genes MEGF11 SLC16A4, CCDC117).

CONCLUSIONS

Accurate measurements contributed to large SNP heritabilities for some morphological traits, even for a small mixed-breed sample size. Multi-breed GWAS detected different loci associated with conformation or carcass traits. The identified potential candidate genes for immune response or feed efficiency indicators reflect the evolutionary development and adaptability features of the breeds.

Genetic parameter estimates for body conformation traits using composite index, principal component, and factor analysis

Information about genetic parameters is population specific and it is crucial for designing animal breeding programs and predicting response to selection. This study was carried out to estimate the genetic parameters for 23 body conformation traits of 45,517 Chinese Holstein reared in Eastern China from 1995 to 2017 with the Bayesian inference method using a linear animal mixed model. The methods to integrate these traits included (1) using the composite index from the Dairy Association of China and (2) applying principal component analysis and factor analysis to explore the relationship between the conformation traits. Estimates of heritability using the composite index were low (0.04; feet and legs) to moderate (0.23; body capacity). Strong genetic correlations were observed between the individual body conformation traits. Both principal components (1 to 7; eigenvalues ≥ 1) and latent factors (1 to 7; eigenvalues ≥ 1) explained 60.37% of total variability. Principal component 1 and factor 1 accounted for the traits that are usually associated with milk production. Moderate to low heritability were estimated through multi-trait analysis for principal components (from 0.07 to 0.21) and latent factors (from 0.07 to 0.23). Genetic correlations among the 2 multivariate techniques are typically lower compared with the one existing among the measured traits. Results from these analyses suggest the possibility of using both principal component analysis and factor analysis in morphological evaluation, simplifying the information given by the body conformation traits into new variables that could be useful for the genetic improvement of the Chinese Holstein population. This information could also be used to avoid analyzing large number of correlated traits, thereby improving precision and reducing computation burdens to analyze large and complex data.

Analysis of genetic correlations between beef traits in young bulls and primiparous cows belonging to the dual-purpose Rendena breed

Selection for beef traits in Italian dual-purpose breeds is often carried out using growth and in vivo conformation recorded on young, performance tested bulls and muscularity traits scored during routinely linear type evaluation on primiparous cows. In this context, the knowledge of the genetic structure of traits obtained in different sexes and at different times is necessary for a proper selection plan. This study aimed to estimate, in the local dual-purpose Rendena breed, the genetic relationships between muscularity linear type traits from primiparous cows, the same traits scored on candidate young bulls, and the performance test traits recorded in candidate young bulls. Type traits included: front (chest and shoulder), back (loins and rump); thigh, buttocks side and rear views (two traits). Performance test traits were: average daily gain; EUROP fleshiness evaluation; and dressing percentage. Muscularity linear type traits were recorded on 11 992 first parity cows, and the muscularity type traits were scored on 957 candidate young bulls. Heritability estimates obtained for muscularity traits were moderate in young bulls (on average 0.326), about 16% higher than in primiparous cows. The average heritability for performance test traits in young bulls resulted 0.342. Moderate to strong genetic correlations were found between performance test and muscularity type traits collected in young bulls (from 0.500 between front (chest and shoulder) and average daily gain to 0.955 between thigh, buttocks side view and in vivo dressing percentage). The genetic relationships obtained between muscularity linear type traits of primiparous cows and performance traits of young bulls were variable (from a null correlation between front (chest and shoulder) and average daily gain to 0.822 between thigh, buttocks rear view and dressing percentage), with an average genetic correlation of 0.532. Generally, the traits measured during performance testing in young bulls were favourably correlated with muscularity traits evaluated on primiparous cows, indicating a common selection pathway.

Genetic correlations among milk yield, morphology, performance test traits and somatic cells in dual-purpose Rendena breed

Selection in native local breeds needs great carefulness due to the small population size and the risk of inbreeding. Furthermore, most breeds are dual-purpose, and milk and beef attitudes are antagonistic. For preservation purposes functional traits need to be considered. Focusing on the small local Rendena cattle, this study aimed to analyse the genetic correlations among milk, beef and udder health traits and the response to selection predicted under different scenarios. The study considered milk, fat and protein yields (MY), factor scores for udder volume (UV), conformation (UC) and muscularity obtained from type traits scored on primiparous cows, and performance test traits (PT) measured on young bulls at test station: average daily gain, in vivo SEUROP fleshiness, in vivo dressing percentage. Somatic cell score (SCS) was considered as a functional trait, with a possibility of restricting its genetic gain to zero. The study considered 281 497 MY test-day data collected on 16 974 cows, and data from linear type evaluation on 11 992 primiparous cows for factor scores. The PT data were recorded on 1428 young bulls, and SCS obtained from cell counts at milk recording. Bi-trait restricted maximum likelihood animal model analyses were performed to assess genetic parameters. Heritability varied from 0.157 (fat) to 0.442 (dressing percentage). Udder volume and MY resulted positively genetically correlated (average correlation 0.427), whereas the low-negative genetic correlation between MY and UC (-0.141) suggested a negative impact of milk gain on udder form. Beef traits of factor muscularity and PT showed medium-high favourable genetic correlations (from 0.357 to 0.984), excluding a null correlation between daily gain and muscularity. The genetic correlation MY v. muscularity was unfavourable (-0.328 on average), whereas null correlations were found in MY v. PT, apart from fat v. dressing percentage (-0.151). Somatic cell score showed low unfavourable correlations with protein (0.111) and UV (0.092), and favourable correlations with UC (-0.193). Response to selection in different scenarios indicated a good balanced gain for milk and beef when standardized economic weights of 0.66 and 0.34 are given to the two attitudes, and SCS genetic gain is restricted. Current genetic trends (MY and PT increasing, but muscularity lessening) reflect a stronger selection for milk, suggesting a slight progressive change towards a milk conformation. Aiming to preserve the dual-purpose characteristics of a breed, proper breeding policies taking into account the genetic relationships among traits and including functional traits should be applied in local dual-purpose populations.

Genome-wide association studies identified multiple genetic loci for body size at four growth stages in Chinese Holstein cattle

The growth and maturity of cattle body size affect not only feed efficiency, but also productivity and longevity. Dissecting the genetic architecture of body size is critical for cattle breeding to improve both efficiency and productivity. The volume and weight of body size are indicated by several measurements. Among them, Heart Girth (HG) and Hip Height (HH) are the most important traits. They are widely used as predictors of body weight (BW). Few association studies have been conducted for HG and HH in cattle focusing on single growth stage. In this study, we extended the Genome-wide association studies to a full spectrum of four growth stages (6-, 12-, 18-, and 24-months after birth) in Chinese Holstein heifers. The whole genomic single nucleotide polymorphisms (SNPs) were obtained from the Illumina BovineSNP50 v2 BeadChip genotyped on 3,325 individuals. Estimated breeding values (EBVs) were derived for both HG and HH at the four different ages and analyzed separately for GWAS by using the Fixed and random model Circuitous Probability Unification (FarmCPU) method. In total, 27 SNPs were identified to be significantly associated with HG and HH at different growth stages. We found 66 candidate genes located nearby the associated SNPs, including nine genes that were known as highly related to development and skeletal and muscular growth. In addition, biological function analysis was performed by Ingenuity Pathway Analysis and an interaction network related to development was obtained, which contained 16 genes out of the 66 candidates. The set of putative genes provided valuable resources and can help elucidate the genomic architecture and mechanisms underlying growth traits in dairy cattle.

Body traits, carcass characteristics and price of cull cows as affected by farm type, breed, age and calving to culling interval

Beef production from cull cows is an additional source of income for dairy farms and greatly contributes to red meat production, but the sources of variation of live animal characteristics and the carcass traits of cull cows have rarely been examined. This study investigated the effects of the farm type, breed, age at slaughter (AGE) and calving to culling interval (Calv_Cull) on the body traits and carcass characteristics of dairy and dual-purpose cull cows. Data from 555 cull cows from 182 herds belonging to five farm types, characterised by a combination of housing and feeding systems, were recorded and analysed. Dairy breeds, such as Holstein Friesian and Brown Swiss, and dual-purpose breeds (Simmental, Rendena) were included in the trait assessments. The day before slaughter, the cows were weighed and scored for body condition (BCS) and fleshiness, and then, their heart girth and wither height were measured. At the slaughterhouse, the carcass weight (CW), dressing percentage (DP), carcass conformation and fatness scores, carcass price per kg and carcass total value were obtained. On average, the cows were slaughtered at nearly 71±27 months of age, 285±187 days after the last calving; 615±95 kg BW; and provided a 257±51 kg CW. Nearly 50% of the cows fell within the BCS range of 2.75 to 3.50, and the carcasses were mostly graded in the lowest class of conformation and fatness scores. Cull cows from free-stall farms had a higher DP, carcass conformation score and price than those from traditional tie-stall farms. The breed influenced the AGE, live animal characteristics and carcass traits. Cows from dairy breeds were younger at slaughter, had a lower BCS and fleshiness, and greater body measurements, but a lower DP and carcass price than those from dual-purpose breeds, although differences between the breeds were found within both groups. The age of the cows at slaughter influenced the Calv_Cull and increased the BW, body measurements and CW, but not the fleshiness and fatness appreciation (both in vivo and postmortem) or carcass price. The increasing Calv_Cull improved the BW, BCS, fleshiness, CW and carcass conformation and fatness. In conclusion, the decision to cull dairy cows should also take into account the factors that affect their carcass value in regards to improving the carcass price of cows.

Genetic correlations between type and test-day milk yield in small dual-purpose cattle populations: The Aosta Red Pied breed as a case study

This study aimed at estimating the relationships between linear type traits and milk production in the dual-purpose Aosta Red Pied (ARP) cattle breed, by expressing type traits as factor scores with the same biological meaning of the individual traits. Factor analysis was applied to individual type traits for muscularity and udder of 32,275 first-parity ARP cows, obtaining 3 factor scores for individual muscularity (F1), udder side (F2), and udder conformation (F3). Data from 169,008 test-day records of milk, fat, and protein yield (kg), belonging to the first 3 lactations of 16,605 cows, were also analyzed. After obtaining genetic parameters for both morphological factors and milk production traits through a series of AIREML single-trait models, bivariate analyses were performed on a data set accounting for 201,283 records of 35,530 cows, to assess the phenotypic and genetic correlations among all factor scores and milk yield traits. The heritability estimates obtained proved to be moderate for both groups of traits, ranging from 0.132 (fat) to 0.314 (F1). Muscularity factor showed moderate and negative genetic correlations (ra) with udder size (-0.376) and udder conformation (0.214) factors. A low and negative ra was found between udder factors. Strong and positive ra were found among all the 3 milk production traits and F 0010 (ra≥0.597). Negative ra with milk traits were obtained for both F 0005 and F3, ranging from -0.417 to -0.221. Phenotypic correlations were lower than the genetic ones, and sometimes close to zero. The antagonism between milk production and meat attitude traits suggests that great attention should be paid in assigning proper weight to the traits, comprising functional traits such as udder conformation, included in selection indices for the dual-purpose breed. The ra obtained for factor scores are consistent with previous estimates for the corresponding individual type traits, and this confirms the possible use of factor analysis to improve type traits relevant to beef attitude.

Phenotypic and genetic parameters of antibody and delayed-type hypersensitivity responses of lactating Holstein cows

Breeding dairy cattle using diverse phenotypic markers has been suggested as a feasible approach to improve health and decrease the deleterious consequences of infectious diseases. Studies conducted in pigs have demonstrated the value of antibody (AMIR)- and cell (CMIR)-mediated immune responses as quantitative traits for improving immune responsiveness by selecting livestock using estimated breeding values (EBV) for immune response (IR) traits. Studies of cattle have tested the possibility of using IR traits as phenotypic markers to classify cows as high (HR), average (AR) and low (LR) responders. Information is scarce or unavailable about either genetic parameters of AMIR and CMIR or their phenotypic and genetic associations with production, conformation, fertility or health traits in lactating dairy cattle. The objectives of the current study were to evaluate phenotypic and genetic parameters of both AMIR and CMIR as quantitative immunological traits (n=6) in comparison with production, fertility and health traits in dairy cattle for their use in a selection index intended to improve bovine health. Results of this study showed significant AMIR and CMIR responses. Most phenotypic correlations between IR traits and production, health or fertility traits were not significant. The highest heritabilities (h(2)) were observed for delayed-type hypersensitivity (DTH) to killed Candida albicans whole cell (CaWC) at 48 h (0.54) and AMIR day 14 (0.42). The highest genetic correlations were observed between AMIR 14 and AMIR 21 (0.99) and between DTH to CaWC 24h and DTH to CaWC 48 h (0.93). Two important and significant sire EBV correlations were noted between AMIR and fat % (0.18), and between CMIR and protein % (-0.15). In conclusion, this study demonstrated that both AMIR and CMIR are heritable traits in cattle and could be considered for their inclusion in a selection index intended to improve health.

Genetic relationship of conformation traits with average somatic cell score at 150 and 305 days in milk in Holstein cows of Iran

Genetic, environmental, and phenotypic correlations among average somatic cell score (SCS) at different stages of lactation and conformation traits were estimated. Data consisted of the lactational average of SCS at 150 (SCS(150)) and 305 (SCS(305)) d in milk and 19 conformation traits recorded on 57,154 primiparous Holstein cows, that calved from 1996 to 2009 in 119 herds in Iran. Variance components were estimated using the restricted maximum likelihood procedure based on multiple-trait animal models. Udder depth (-0.32), fore udder attachment (-0.22), and udder width (0.34) showed moderate genetic correlation with SCS(150). Heart girth (0.17), body depth (0.14), chest width (0.26), and angularity (0.19), showed modest genetic correlation with SCS(150). The estimated heritabilities for SCS(150) and SCS(305) were 0.06 and 0.08, respectively. The heritability of the conformation traits ranged from 0.09 to 0.29. Genetic and environmental correlations between SCS(150) and SCS(305) were very high (means ± SE; 0.99±0.01 and 0.89±0.01, respectively), which indicates that recording SCS over a shorter period of lactation is an alternative approach for involving many herds in SCS data collection. The low heritability of SCS indicated that indirect selection for some of udder and body traits might be helpful to reduce the SCS. Additionally, selection for udder traits may help reduce SCS in developing countries where SCS data are sparsely recorded.