New tools for labeling silica in living diatoms

Exploring salinity induced adaptations in marine diatoms using advanced photonic techniques

Photonic-based methods are crucial in biology and medicine due to their non-invasive nature, allowing remote measurements without affecting biological specimens. The study of diatoms using advanced photonic methods remains a relatively underexplored area, presenting significant opportunities for pioneering discoveries. This research provides a comprehensive analysis of marine diatoms, specifically Nitzschia sp., across varying salinity levels, integrating fluorescence lifetime imaging microscopy (FLIM), combined photoacoustic and fluorescence tomographies (PAFT), and ultrastructural examinations using transmission electron microscopy. Key findings include a systematic shift in the mean fluorescence lifetime from 570 ps at 20‰ to 940 ps at 80‰, indicating functional adaptations in chlorophyll molecules within light-harvesting complexes. At 60‰ salinity, anomalies are observed in the development of silica valves and polysaccharide layers, suggesting abnormalities in valve morphogenesis. Lipid droplets within the cells display a minimum diameter at 40‰, indicating metabolic adjustments to osmotic stress. The intensity of both fluorescence and photoacoustic signals increases with increasing salinity levels. These insights enhance understanding of the ecological implications of salinity stress on diatom communities and pave the way for future research on leveraging the unique adaptive mechanisms of microalgae for environmental monitoring and sustainable biotechnological applications.

Widefield Super-Resolution Infrared Spectroscopy and Imaging of Autofluorescent Biological Materials and Photosynthetic Microorganisms Using Fluorescence Detected Photothermal Infrared (FL-PTIR)

We have demonstrated high-speed, super-resolution infrared (IR) spectroscopy and chemical imaging of autofluorescent biomaterials and organisms using camera-based widefield photothermal detection that takes advantage of temperature-dependent modulations of autofluorescent emission. A variety of biological materials and photosynthetic organisms exhibit strong autofluorescence emission under ultraviolet excitation and the autofluorescent emission has a very strong temperature dependence, of order 1%/K. Illuminating a sample with pulses of IR light from a wavelength-tunable laser source causes periodic localized sample temperature increases that result in a corresponding transient decrease in autofluorescent emission. A low-cost light-emitting diode-based fluorescence excitation source was used in combination with a conventional fluorescence microscopy camera to detect localized variations in autofluorescent emission over a wide area as an indicator of localized IR absorption. IR absorption image stacks were acquired over a range of IR wavelengths, including the fingerprint spectral range, enabling extraction of localized IR absorption spectra. We have applied widefield fluorescence detected photothermal IR (FL-PTIR) to an analysis of autofluorescent biological materials including collagen, leaf tissue, and photosynthetic organisms including diatoms and green microalgae cells. We have also demonstrated the FL-PTIR on live microalgae in water, demonstrating the potential for label-free dynamic chemical imaging of autofluorescent cells.

Stress-Adaptive Stiffening Structures Inspired by Diatoms: A Parametric Solution for Lightweight Surfaces

The intricate and highly complex morphologies of diatom frustules have long captured the attention of biomimetic researchers, initiating innovation in engineering solutions. This study investigates the potential of diatom-inspired surface stiffeners to determine whether the introduced innovative strategy is a viable alternative for addressing engineering challenges demanding enhanced stiffness. This interdisciplinary study focuses on the computer-aided generation of stress-adaptive lightweight structures aimed at optimizing bending stiffness. Through a comprehensive microscopical analysis, morphological characteristics of diatom frustules were identified and abstracted to be applied to a reference model using computer-aided methods and simulated to analyze their mechanical behavior under load-bearing conditions. Afterwards, the models are compared against a conventional engineering approach. The most promising biomimetic approach is successfully automated, extending its applicability to non-planar surfaces and diverse boundary conditions. It yields notable improvement in bending stiffness, which manifests in a decrease of displacement by approximately 93% in comparison to the reference model with an equivalent total mass. Nonetheless, for the specific load case considered, the engineering approach yields the least displacement. Although certain applications may favor conventional methods, the presented approach holds promise for scenarios subjected to varying stresses, necessitating lightweight and robust solutions.

Incorporating a molecular antenna in diatom microalgae cells enhances photosynthesis

Diatom microalgae have great industrial potential as next-generation sources of biomaterials and biofuels. Effective scale-up of their production can be pursued by enhancing the efficiency of their photosynthetic process in a way that increases the solar-to-biomass conversion yield. A proof-of-concept demonstration is given of the possibility of enhancing the light absorption of algae and of increasing their efficiency in photosynthesis by in vivo incorporation of an organic dye which acts as an antenna and enhances cells’ growth and biomass production without resorting to genetic modification. A molecular dye (Cy5) is incorporated in Thalassiosira weissflogii diatom cells by simply adding it to the culture medium and thus filling the orange gap that limits their absorption of sunlight. Cy5 enhances diatoms’ photosynthetic oxygen production and cell density by 49% and 40%, respectively. Cy5 incorporation also increases by 12% the algal lipid free fatty acid (FFA) production versus the pristine cell culture, thus representing a suitable way to enhance biofuel generation from algal species. Time-resolved spectroscopy reveals Förster Resonance Energy Transfer (FRET) from Cy5 to algal chlorophyll. The present approach lays the basis for non-genetic tailoring of diatoms’ spectral response to light harvesting, opening up new ways for their industrial valorization.

Characterizations and analysis of genus Amphora diatom frustules: a promising biomaterial

In the present study, the authors have synthesized biosilica from marine diatoms (Amphora sp.) by using an optimized procedure with a combination of acid and salt washing treatments. The purification of frustules employed a simple methodology that combines acid digestion and rinsing with hydrogen peroxide. The content of Amphora sp. biosilica has been analyzed through energy-dispersive spectroscopy. The result declares the purity of biosilica, which is highly pristine in comparison to diatomaceous earth. The structural architecture of Amphora sp. is typically amorphous in nature. Moreover, Amphora sp. biosilica has a mesopore diameter and a surface area of 4·838 nm and 332 m2/g, respectively, which are relatively higher than those from previous reports. The adsorption/desorption isotherm results suggest that the derived frustules have a highly porous architecture, which shows their great potential to be used as drug delivery carriers, biosensors, biocatalysts and adsorbents in the future.

Rapid aggregation of biofilm-covered microplastics with marine biogenic particles

Ocean plastic pollution has resulted in a substantial accumulation of microplastics in the marine environment. Today, this plastic litter is ubiquitous in the oceans, including even remote habitats such as deep-sea sediments and polar sea ice, and it is believed to pose a threat to ecosystem health. However, the concentration of microplastics in the surface layer of the oceans is considerably lower than expected, given the ongoing replenishment of microplastics and the tendency of many plastic types to float. It has been hypothesized that microplastics leave the upper ocean by aggregation and subsequent sedimentation. We tested this hypothesis by investigating the interactions of microplastics with marine biogenic particles collected in the southwestern Baltic Sea. Our laboratory experiments revealed a large potential of microplastics to rapidly coagulate with biogenic particles, which substantiates this hypothesis. Together with the biogenic particles, the microplastics efficiently formed pronounced aggregates within a few days. The aggregation of microplastics and biogenic particles was significantly accelerated by microbial biofilms that had formed on the plastic surfaces. We assume that the demonstrated aggregation behaviour facilitates the export of microplastics from the surface layer of the oceans and plays an important role in the redistribution of microplastics in the oceans.

Anomalies in the valve morphogenesis of the centric diatom alga Aulacoseira islandica caused by microtubule inhibitors

Of all unicellular organisms possessing a cell wall, diatoms are the most adept at micro- and nanoscale embellishment of their frustules. Elements of their cell walls are formed inside the cell under cytoskeletal control. In this work, we used laser scanning microscopy and electron microscopy to describe the major stages of cell wall formation in the centric diatom algae Aulacoseira islandica and to study the effect of various microtubule inhibitors on the morphogenesis of frustule elements. Our results show that colchicine inhibits karyokinesis and cytokinesis in A. islandica colonies. In contrast, valve morphogenesis is changed, rather than inhibited altogether. In normal cells, this process starts simultaneously in both daughter cells, beginning with the formation of two adjacent discs that later become valve faces and connecting spines. Under colchicine treatment, however, the cleavage furrow is blocked and a single lateral valve forms on the side of the cylindrical frustule. As a result, a single hollow pipe forms instead of two separate drinking glass-shaped frustules; such pipes can form up to 35% of all forming frustules. Colchicine inhibits the formation of connecting spines, whereas paclitaxel causes spines to form a complex, branching shape. At the same time, inhibitors do not affect the formation of areolae (openings) in the frustule. We discuss the possibility that various processes of the diatom frustule morphogenesis are controlled by two different mechanisms: membrane-related micromorphogenesis and cytoskeleton-mediated macromorphogenesis.

Multiple Routes to Smart Nanostructured Materials from Diatom Microalgae: A Chemical Perspective

Diatoms are unicellular photosynthetic microalgae, ubiquitously diffused in both marine and freshwater environments, which exist worldwide with more than 100 000 species, each with different morphologies and dimensions, but typically ranging from 10 to 200 µm. A special feature of diatoms is their production of siliceous micro- to nanoporous cell walls, the frustules, whose hierarchical organization of silica layers produces extraordinarily intricate pore patterns. Due to the high surface area, mechanical resistance, unique optical features, and biocompatibility, a number of applications of diatom frustules have been investigated in photonics, sensing, optoelectronics, biomedicine, and energy conversion and storage. Current progress in diatom-based nanotechnology relies primarily on the availability of various strategies to isolate frustules, retaining their morphological features, and modify their chemical composition for applications that are not restricted to those of the bare biosilica produced by diatoms. Chemical or biological methods that decorate, integrate, convert, or mimic diatoms' biosilica shells while preserving their structural features represent powerful tools in developing scalable, low-cost routes to a wide variety of nanostructured smart materials. Here, the different approaches to chemical modification as the basis for the description of applications relating to the different materials thus obtained are presented.

Fluorescently-tagged polyamines for the staining of siliceous materials

Siliceous frustules of diatom algae contain unique long-chain polyamines, including those having more than six nitrogen atoms. These polyamines participate in the formation of the siliceous frustules of the diatoms but their precise physiological role is not clear. The main hypotheses include formation of a polyamine and polyphosphate supramolecular matrix. We have synthesized novel fluorescent dyes from a synthetic oligomeric mixture of polyamines and the fluorophore 7-nitro-2,1,3-benzoxadiazole. The long polyamine chain ensures the high affinity of these dyes to silica, which allows their application in the staining of siliceous materials, such as valves of diatom algae and fossilized samples from sediments. The fluorescently stained diatom valves were found to be promising liquid flow tracers in hydrodynamic tests. Furthermore, complexation of the polyamine component of the dyes with carbonic polymeric acids results in changes to the visible spectrum of the fluorophore, which allows study of the stability of the complex vs the length of the polyamine chain. Using poly (vinyl phosphonic acid) as a model for phosphate functionality in silaffins (a potential matrix in the formation of biogenic silica) little complexation with the polyamine fluorophores was observed, bringing into question the role of a polyamine - polymeric phosphate matrix in biosilicification.

The role of the cytoskeleton in biomineralisation in haptophyte algae

The production of calcium carbonate by coccolithophores (haptophytes) contributes significantly to global biogeochemical cycling. The recent identification of a silicifying haptophyte, Prymnesium neolepis, has provided new insight into the evolution of biomineralisation in this lineage. However, the cellular mechanisms of biomineralisation in both calcifying and silicifying haptophytes remain poorly understood. To look for commonalities between these two biomineralisation systems in haptophytes, we have determined the role of actin and tubulin in the formation of intracellular biomineralised scales in the coccolithophore, Coccolithus braarudii and in P. neolepis. We find that disruption of the actin network interferes with secretion of the biomineralised elements in both C. braarudii and P. neolepis. In contrast, disruption of the microtubule network does not prevent secretion of the silica scales in P. neolepis but results in production of abnormally small silica scales and also results in the increased formation of malformed coccoliths in C. braarudii. We conclude that the cytoskeleton plays a crucial role in biomineralisation in both silicifying and calcifying haptophytes. There are some important similarities in the contribution of the cytoskeleton to these different forms of biomineralisation, suggesting that common cellular mechanisms may have been recruited to perform similar roles in both lineages.

Synthetic vs Natural: Diatoms Bioderived Porous Materials for the Next Generation of Healthcare Nanodevices

Nanostructured porous materials promise a next generation of innovative devices for healthcare and biomedical applications. The fabrication of such materials generally requires complex synthesis procedures, not always available in laboratories or sustainable in industries, and has adverse environmental impact. Nanosized porous materials can also be obtained from natural resources, which are an attractive alternative approach to man-made fabrication. Biogenic nanoporous silica from diatoms, and diatomaceous earths, constitutes largely available, low-cost reservoir of mesoporous nanodevices that can be engineered for theranostic applications, ranging from subcellular imaging to drug delivery. In this progress report, main experiences on nature-derived nanoparticles with healthcare and biomedical functionalities are reviewed and critically analyzed in search of a new collection of biocompatible porous nanomaterials.

Biosilica from Living Diatoms: Investigations on Biocompatibility of Bare and Chemically Modified Thalassiosira weissflogii Silica Shells

In the past decade, mesoporous silica nanoparticles (MSNs) with a large surface area and pore volume have attracted considerable attention for their application in drug delivery and biomedicine. Here we propose biosilica from diatoms as an alternative source of mesoporous materials in the field of multifunctional supports for cell growth: the biosilica surfaces were chemically modified by traditional silanization methods resulting in diatom silica microparticles functionalized with 3-mercaptopropyl-trimethoxysilane (MPTMS) and 3-aminopropyl-triethoxysilane (APTES). Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analyses revealed that the -SH or -NH₂ were successfully grafted onto the biosilica surface. The relationship among the type of functional groups and the cell viability was established as well as the interaction of the cells with the nanoporosity of frustules. These results show that diatom microparticles are promising natural biomaterials suitable for cell growth, and that the surfaces, owing to the mercapto groups, exhibit good biocompatibility.

Cytoplasmic inheritance of parent-offspring cell structure in the clonal diatom Cyclotella meneghiniana

In cytoplasmic inheritance, structural states of a parent cell could be transmitted to offspring cells via two mechanisms. The first is referred to as the hangover of parent structure, where the structure itself remains and faithfully transmits within offspring cells; the second is structural inheritance, wherein the parent structure functions as a template for development of new offspring structure. We estimated to what extent the parent structure affects the development of offspring structure by structural inheritance, using a clone of the diatom Cyclotella meneghiniana The cell has two siliceous valves (a cell wall part at both cell poles): one is inherited from the parent and the other is newly formed. We estimated cytoplasmic heritability by comparing valve traits (central fultoportulae (CTFP), striae, central area, and cell diameter) of parent and new offspring valves, using single-cell isolation and valve labelling. Parent-offspring valve trait regressions showed that all traits, except CTFP, were significantly correlated. We formulated a quantitative genetic model considering the diatom inheritance system and revealed short-term rapid evolution compared with other inheritance systems. Diatom structural inheritance will have evolved to enable clonal populations to rapidly acquire and maintain suitable structures for temporal changes in environments and life-cycle stages.

A model for the effects of germanium on silica biomineralization in choanoflagellates

Silica biomineralization is a widespread phenomenon of major biotechnological interest. Modifying biosilica with substances like germanium (Ge) can confer useful new properties, although exposure to high levels of Ge disrupts normal biosilicification. No clear mechanism explains why this disruption occurs. Here, we study the effect of Ge on loricate choanoflagellates, a group of protists that construct a species-specific extracellular lorica from multiple siliceous costal strips. High Ge exposures were toxic, whereas lower Ge exposures produced cells with incomplete or absent loricae. These effects can be ameliorated by restoring the germanium : silicon ratio, as observed in other biosilicifying organisms. We developed simulations of how Ge interacts with polymerizing silica. In our models, Ge is readily incorporated at the ends of silica forming from silicic acid condensation, but this prevents further silica polymerization. Our 'Ge-capping' model is supported by observations from loricate choanoflagellates. Ge exposure terminates costal strip synthesis and lorica formation, resulting in disruption to cytokinesis and fatal build-up of silicic acid. Applying the Ge-capping model to other siliceous organisms explains the general toxicity of Ge and identifies potential protective responses in metalloid uptake and sensing. This can improve the design of new silica biomaterials, and further our understanding of silicon metabolism.

Simultaneous uptake of a Förster transfer dye pair by diatoms: Application in determination of staining density

The simultaneous uptake of PDMPO and Rhodamine B as two fluorescent dyes forming a Förster transfer pair by the diatom Cyclotella meneghiniana is demonstrated by in vivo-fluorochromation. The incorporation density in the cell walls was high enough for achieving resonant energy transfer between the two dyes as detected by fluorescence and excitation spectroscopy. The mean fluorescence lifetime of the donor is shortened in the presence of the acceptor by a factor of 0.75. By determining the mean lifetime from the fluorescence decay fitted by three eponentials, the efficiency of the energy transfer and the acceptor concentration is calculated assuming a homogenous distribution. For an initial concentration of both dyes of 5μM in the culture medium which is at the saturation limit of incorporation, an acceptor incorporation density of 0.6mM is obtained. In addition to such quantitative determinations, efficient emitting systems based on resonant energy transfer between two laser dyes may be useful in photonic applications of the hybrid biomineral. By achieving stimulated emission, the presence of optical modes in diatom frustules, which may act as photonic resonators due to the refractive index contrast to the environment in combination with the more or less regular pore pattern, may be characterized further.

Applications of Imaging Flow Cytometry for Microalgae

The ability to image large numbers of cells at high resolution enhances flow cytometric analysis of cells and cell populations. In particular, the ability to image intracellular features adds a unique aspect to analyses, and can enable correlation between molecular phenomena resulting in alterations in cellular phenotype. Unicellular microalgae are amenable to high-throughput analysis to capture the diversity of cell types in natural samples, or diverse cellular responses in clonal populations, especially using imaging cytometry. Using examples from our laboratory, we review applications of imaging cytometry, specifically using an Amnis(®) ImageStream(®)X instrument, to characterize photosynthetic microalgae. Some of these examples highlight advantages of imaging flow cytometry for certain research objectives, but we also include examples that would not necessarily require imaging and could be performed on a conventional cytometer to demonstrate other concepts in cytometric evaluation of microalgae. We demonstrate the value of these approaches for (1) analysis of populations, (2) documentation of cellular features, and (3) analysis of gene expression.

New insights into the complex architecture of siliceous copepod teeth

Copepods belong to the dominant marine zooplankton taxa and play an important role in particle and energy fluxes of the marine water column. Their mandibular gnathobases possess tooth-like structures, so-called teeth. In species feeding on large proportions of diatoms these teeth often contain silica, which is very probably the result of a coevolution with the siliceous diatom frustules. Detailed knowledge of the morphology and composition of the siliceous teeth is essential for understanding their functioning and their significance in the context of feeding interactions between copepods and diatoms. Based on analyses of the gnathobases of the Antarctic copepod Rhincalanus gigas, the present study clearly shows, for the first time, that the silica in the siliceous teeth features large proportions of crystalline silica that is consistent with the mineral α-cristobalite and is doped with aluminium. The siliceous structures have internal chitinous fibre networks, which are assumed to serve as scaffolds during the silicification process. The compact siliceous teeth of R. gigas are accompanied by structures with large proportions of the elastic protein resilin, likely reducing the mechanical damage of the teeth when the copepods feed on diatoms with very stable frustules. The results indicate that the coevolution with diatom frustules has resulted in gnathobases exhibiting highly sophisticated composite structures.

Serine-rich protein is a novel positive regulator for silicon accumulation in mangrove

Silicon (Si) plays an important role in reducing plant susceptibility against a variety of different biotic and abiotic stresses; and also has an important regulatory role in soil to avoid heavy metal toxicity and providing suitable growing conditions for plants. A full-length cDNAs of 696bp of serine-rich protein was cloned from mangrove plant (Rhizophora apiculata) by amplification of cDNA ends from an expressed sequence tag homologous to groundnut (Arachis hypogaea), submitted to NCBI (KF211374). This serine-rich protein gene encodes a deduced protein of 223 amino acids. The transcript titre of the serine-rich protein was found to be strongly enriched in roots compared with the leaves of two month old mangrove plants and expression level of this serine-rich protein was found to be strongly induced when the mangrove seedlings were exposed to SiO2. Expression of the serine-rich protein transgenic was detected in transgenic Arabidopsis thaliana, where the amount of serine increased from 1.02 to 37.8mg/g. The same trend was also seen in Si content in the roots (14.3%) and leaves (7.4%) of the transgenic A. thaliana compared to the wild-type plants under Si treatment. The biological results demonstrated that the accumulation of the serine amino acid in the vegetative tissues of the transgenic plants enhanced their ability to absorb and accumulate more Si in the roots and leaves and suggests that the serine-rich protein gene has potential for use in genetic engineering of different stress tolerance characteristics.

Early warning tools for ecotoxicity assessment based on Phaeodactylum tricornutum

Phaeodactylum tricornutum was exposed to various toxic substances (zinc, copper or dodecylbenzenesulfonic acid sodium salt) in accordance with the AlgalToxkit(®) protocol based on the UNI EN ISO 10253 method in order to quantitatively compare the responses obtained by traditional growth-rate inhibition tests with morphological (biovolume) and physiological (chlorophyll-a, phaeophytin ratio) endpoints. A novel approach is proposed for detecting early and sub-lethal effects based on biovolume quantification using confocal microscopy coupled with an image analysis system. The results showed that effects on both biovolume and the photosynthetic complex are sensitive and powerful early warning tools for evaluating sub-lethal effects of exposure. Specifically, biovolume showed significant sensitive and early responses for the tested surfactant. Qualitatively, we also observed structural anomalies and effects on natural auto-fluorescence in exposed cells that also represent potentially useful tools for ecotoxicological studies.

Fluorescent silk cocoon creating fluorescent diatom using a "Water glass-fluorophore ferry"

Fluorophores are ubiquitous in nature. Naturally occurring fluorophores are exceptionally stable and have high quantum yield. Several natural systems have acquired fluorescent signature due to the presence of these fluorophores. Systematic attempt to harvest these fluorophores from natural systems could reap rich commercial benefit to bio-imaging industry. Silk cocoon biomaterial is one such example of natural system, which has acquired a fluorescent signature. The objective of this study is to develop simple, rapid, commercially viable technique to isolate silk cocoon membrane fluorophores and exploring the possibility of using them as fluorescent dye in bio-imaging. Here, we report an innovative water glass (Na2SiO3) based strategy to isolate the silk cocoon fluorophores. Isolated fluorophore is majorly quercetin derivatives and exhibited remarkable photo- and heat stability. Fluorescence and mass spectrometric analysis confirmed presence of a quercetin derivative. We further used this fluorophore to successfully label the silicate shell of diatom species Nitzschia palea.

Putative silicon transport vesicles in the cytoplasm of the diatom Synedra acus during surge uptake of silicon

We studied the growth of the araphid pennate diatom Synedra acus subsp. radians (Kützing) Skabichevskii using a fluorescent dye N(1),N(3)-dimethyl-N(1)-(7-nitro-2,1,3-benzoxadiazol-4-yl)propane-1,3-diamine (NBD-N2), which stains growing siliceous frustules but does not stain other subcellular organelles. We used a clonal culture of S. acus that was synchronized by silicon starvation. Epifluorescence microscopy was performed in two different ways with cells stained by the addition of silicic acid and the dye. Individual cells immobilized on glass were observed during the first 15-20 min following the replenishment of silicic acid after silicon starvation. Alternatively, we examined cells of a batch culture at time intervals during 36 h after the replenishment of silicic acid using fluorescence and confocal microscopy. The addition of silicic acid and NBD-N2 resulted in the rapid (1-2 min) formation of several dozen green fluorescent submicrometer particles (GFSPs) in the cytoplasm, which was accompanied by the accumulation of fluorescent silica inside silica deposition vesicles (SDVs) along their full length. In 5-15 min, GFSPs disappeared from the cytoplasm. Mature siliceous valves were formed within the SDVs during the subsequent 14-16 h. In the next 8-10 h, GFSPs appeared again in the cytoplasm of daughter cells. The data obtained confirm observations about the two-stage mechanism of silicon assimilation, which includes rapid silicon uptake (surge uptake) followed by slow silica deposition. It is likely that the observed GFSPs are silicon transport vesicles, which were first proposed by Schmid and Schulz in (Protoplasma 100:267-288, 1979).

Pentalysine clusters mediate silica targeting of silaffins in Thalassiosira pseudonana

The biological formation of inorganic materials (biomineralization) often occurs in specialized intracellular vesicles. Prominent examples are diatoms, a group of single-celled eukaryotic microalgae that produce their SiO2 (silica)-based cell walls within intracellular silica deposition vesicles (SDVs). SDVs contain protein-based organic matrices that control silica formation, resulting in species specifically nanopatterned biosilica, an organic-inorganic composite material. So far no information is available regarding the molecular mechanisms of SDV biogenesis. Here we have investigated by fluorescence microscopy and subcellular membrane fractionation the intracellular transport of silaffin Sil3. Silaffins are a group of phosphoproteins constituting the main components of the organic matrix of diatom biosilica. We demonstrate that the N-terminal signal peptide of Sil3 mediates import into a specific subregion of the endoplasmic reticulum. Additional segments from the mature part of Sil3 are required to reach post-endoplasmic reticulum compartments. Further transport of Sil3 and incorporation into the biosilica (silica targeting) require protein segments that contain a high density of modified lysine residues and phosphoserines. Silica targeting of Sil3 is not dependent on a particular peptide sequence, yet a lysine-rich 12-14-amino acid peptide motif (pentalysine cluster), which is conserved in all silaffins, strongly promotes silica targeting. The results of the present work provide the first insight into the molecular mechanisms for biogenesis of mineral-forming vesicles from an eukaryotic organism.

Characterization and localization of insoluble organic matrices associated with diatom cell walls: insight into their roles during cell wall formation

Organic components associated with diatom cell wall silica are important for the formation, integrity, and function of the cell wall. Polysaccharides are associated with the silica, however their localization, structure, and function remain poorly understood. We used imaging and biochemical approaches to describe in detail characteristics of insoluble organic components associated with the cell wall in 5 different diatom species. Results show that an insoluble organic matrix enriched in mannose, likely the diatotepum, is localized on the proximal surface of the silica cell wall. We did not identify any organic matrix embedded within the silica. We also identified a distinct material consisting of glucose polymer with variable localization depending on the species. In some species this component was directly involved in the morphogenesis of silica structure while in others it appeared to be only a structural component of the cell wall. A novel glucose-rich structure located between daughter cells during division was also identified. This work for the first time correlates the structure, composition, and localization of insoluble organic matrices associated with diatom cell walls. Additionally we identified a novel glucose polymer and characterized its role during silica structure formation.

Multiparametric analyses reveal the pH-dependence of silicon biomineralization in diatoms

Diatoms, the major contributors of the global biogenic silica cycle in modern oceans, account for about 40% of global marine primary productivity. They are an important component of the biological pump in the ocean, and their assemblage can be used as useful climate proxies; it is therefore critical to better understand the changes induced by environmental pH on their physiology, silicification capability and morphology. Here, we show that external pH influences cell growth of the ubiquitous diatom Thalassiosira weissflogii, and modifies intracellular silicic acid and biogenic silica contents per cell. Measurements at the single-cell level reveal that extracellular pH modifications lead to intracellular acidosis. To further understand how variations of the acid-base balance affect silicon metabolism and theca formation, we developed novel imaging techniques to measure the dynamics of valve formation. We demonstrate that the kinetics of valve morphogenesis, at least in the early stages, depends on pH. Analytical modeling results suggest that acidic conditions alter the dynamics of the expansion of the vesicles within which silica polymerization occurs, and probably its internal pH. Morphological analysis of valve patterns reveals that acidification also reduces the dimension of the nanometric pores present on the valves, and concurrently overall valve porosity. Variations in the valve silica network seem to be more correlated to the dynamics and the regulation of the morphogenesis process than the silicon incorporation rate. These multiparametric analyses from single-cell to cell-population levels demonstrate that several higher-level processes are sensitive to the acid-base balance in diatoms, and its regulation is a key factor for the control of pattern formation and silicon metabolism.

Staining diatoms with rhodamine dyes: control of emission colour in photonic biocomposites

The incorporation of rhodamine dyes in the cell wall of diatoms Coscinodiscus granii and Coscinodiscus wailesii for the production of luminescent hybrid nanostructures is investigated. By systematic variation of the substitution pattern of the rhodamine core, we found that carbonic acids are considerably better suited than esters because of their physiological compatibility. The amino substitution pattern that controls the optical properties of the chromophore has no critical influence on dye uptake and incorporation, thus a variety of biocomposites with different emission maxima can be prepared. Applications in biomineralization studies as well as in materials science are envisioned.

Diatom cell division in an environmental context

Studies of cell division in organisms derived from secondary endosymbiosis such as diatoms have revealed that the mechanisms are far from those found in more conventional model eukaryotes. An atypical acentriolar microtuble-organizing centre, centripetal cytokinesis combined with centrifugal cell wall neosynthesis, and the role of sex in relation to cell size restoration make diatoms an exciting system to re-investigate the evolution, differentiation and regulation of cell division. Such studies are further justified considering the ecological relevance of these microalgae in contemporary oceans and the need to understand the mechanisms controlling their growth and distribution in an environmental context. Recent work derived from genome-wide analyses on representative model diatoms reveals that the cell cycle is finely tuned to inputs derived from both endogenous and environmental signals.

Oceanographic and biogeochemical insights from diatom genomes

Diatoms are the most successful group of eukaryotic phytoplankton in the modern ocean and have risen to dominance relatively quickly over the last 100 million years. Recently completed whole genome sequences from two species of diatom, Thalassiosira pseudonana and Phaeodactylum tricornutum, have revealed a wealth of information about the evolutionary origins and metabolic adaptations that have led to their ecological success. A major finding is that they have incorporated genes both from their endosymbiotic ancestors and by horizontal gene transfer from marine bacteria. This unique melting pot of genes encodes novel capacities for metabolic management, for example, allowing the integration of a urea cycle into a photosynthetic cell. In this review we show how genome-enabled approaches are being leveraged to explore major phenomena of oceanographic and biogeochemical relevance, such as nutrient assimilation and life histories in diatoms. We also discuss how diatoms may be affected by climate change-induced alterations in ocean processes.

Genome-wide transcriptome analyses of silicon metabolism in Phaeodactylum tricornutum reveal the multilevel regulation of silicic acid transporters

Background

Diatoms are largely responsible for production of biogenic silica in the global ocean. However, in surface seawater, Si(OH)₄ can be a major limiting factor for diatom productivity. Analyzing at the global scale the genes networks involved in Si transport and metabolism is critical in order to elucidate Si biomineralization, and to understand diatoms contribution to biogeochemical cycles.

Methodology/Principal Findings

Using whole genome expression analyses we evaluated the transcriptional response to Si availability for the model species Phaeodactylum tricornutum. Among the differentially regulated genes we found genes involved in glutamine-nitrogen pathways, encoding putative extracellular matrix components, or involved in iron regulation. Some of these compounds may be good candidates for intracellular intermediates involved in silicic acid storage and/or intracellular transport, which are very important processes that remain mysterious in diatoms. Expression analyses and localization studies gave the first picture of the spatial distribution of a silicic acid transporter in a diatom model species, and support the existence of transcriptional and post-transcriptional regulations.

Conclusions/Significance

Our global analyses revealed that about one fourth of the differentially expressed genes are organized in clusters, underlying a possible evolution of P. tricornutum genome, and perhaps other pennate diatoms, toward a better optimization of its response to variable environmental stimuli. High fitness and adaptation of diatoms to various Si levels in marine environments might arise in part by global regulations from gene (expression level) to genomic (organization in clusters, dosage compensation by gene duplication), and by post-transcriptional regulation and spatial distribution of SIT proteins.

Microbial oceanography in a sea of opportunity

Plankton use solar energy to drive the nutrient cycles that make the planet habitable for larger organisms. We can now explore the diversity and functions of plankton using genomics, revealing the gene repertoires associated with survival in the oceans. Such studies will help us to appreciate the sensitivity of ocean systems and of the ocean's response to climate change, improving the predictive power of climate models.

Plasticity and robustness of pattern formation in the model diatom Phaeodactylum tricornutum

Understanding the morphogenesis of mineralized structures found in shells, bones, teeth, spicules and plant cell walls is difficult because of the complexities underlying biomineralization, and the requirement of accurate models for pattern formation. Here, we investigated the spatial and temporal development of siliceous structures found in a model diatom species, Phaeodactylum tricornutum, for which the entire genome has been sequenced and transformation is routine. Analyses of pattern formation revealed that the process of silicification starts from a 'pi-like' structure that controls the spatial organization of a sternum upon which regular instabilities are initiated and developed. Detailed analyses also demonstrate that morphogenesis of silica is nonuniform. We also tested the sensitivity of pattern formation to perturbation of proton pumps, and found that selective inhibitors of H(+)-V-ATPases affect silica biomineralization both quantitatively and qualitatively. Morphometric analyses of valves purified from isogenic populations of cells show that the morphometric noise of several traits is under exquisite regulation, explaining why the overall valve pattern is reproducibly maintained. Altogether our analyses demonstrate that silica morphogenesis is a robust but nonuniform process, and allow us to propose a model for the dynamic growth of materials within a spatially controlled geometry.

The Glass Menagerie: diatoms for novel applications in nanotechnology

Diatoms are unicellular, eukaryotic, photosynthetic algae that are found in aquatic environments. Diatoms have enormous ecological importance on this planet and display a diversity of patterns and structures at the nano- to millimetre scale. Diatom nanotechnology, a new interdisciplinary area, has spawned collaborations in biology, biochemistry, biotechnology, physics, chemistry, material science and engineering. We survey diatom nanotechnology since 2005, emphasizing recent advances in diatom biomineralization, biophotonics, photoluminescence, microfluidics, compustat domestication, multiscale porosity, silica sequestering of proteins, detection of trace gases, controlled drug delivery and computer design. Diatoms might become the first organisms for which the gap in our knowledge of the relationship between genotype and phenotype is closed.

Silica biomineralization in diatoms: the model organism Thalassiosira pseudonana

After complete genome sequencing, the diatom Thalassiosira pseudonana has become an attractive model organism for silica biomineralization studies. Recent progress, especially with respect to intracellular silicic acid processing, as well as to the natures of the biomolecules involved in diatom cell wall formation, is described. On the one hand, considerable progress has been made with respect to silicon uptake by special proteins (SITs) from the surrounding water, as well as to the storage and processing of silicon before cell division. On the other hand, the discovery and characterisation of remarkable biomolecules such as silaffins, polyamines and--quite recently--of silacidins in the siliceous cell walls of diatoms strongly impacts the growing field of biomimetic materials synthesis.