A clinical long-term radiographic evaluation of graft height changes after maxillary sinus floor augmentation with a 2 : 1 autogenous bone/xenograft mixture and simultaneous placement of dental implants

Radiographic graft changes following maxillary sinus floor augmentation with autogenous bone compared with composite grafts: a one-year single-blind randomized controlled trial

This study evaluated radiographic graft changes following maxillary sinus floor augmentation with (A) autogenous bone, (B) 1:1 autogenous bone and deproteinized porcine bone mineral, or (C) 1:1 autogenous bone and biphasic bone graft material. Sixty patients were randomly allocated to groups A, B, and C (20 in each). CBCT scans were obtained at enrolment, after surgery (T1), after prosthetic rehabilitation (T2), and 1 year after implant loading (T3). Significant decreases in graft volume (3D) and graft height (2D) from T1 to T3 were observed in all groups (P < 0.05). However, at T2 and T3, graft volume was significantly higher in group B than in groups A and C (P < 0.05), and graft height was significantly higher in group B than in group A (P < 0.05). Bone density increased significantly from T1 to T2 in all groups (P < 0.001). However, bone density was significantly higher in group B than in groups A and C, at T2 and T3 (P < 0.05). No significant correlation between graft volume or height and implant protrusion length or residual bone height was found. In conclusion, 1:1 autogenous bone and porcine bone resulted in significantly higher graft volume, height, and bone density when compared with autogenous bone or a 1:1 ratio of autogenous bone and biphasic bone. However the higher graft volume, height, and bone density did not appear to lead to improved outcomes at 1 year of functional loading when compared to the other groups.

Three-dimensional volumetric assessment and stability of simultaneously placed implant following sinus floor augmentation with deproteinized human demineralized tooth matrix or deproteinized bovine bone mineral: a randomized controlled clinical trial

PURPOSE

This study aimed to analyze and compare three-dimensional volumetric bone changes and stability of simultaneously placed dental implants following sinus augmentation using deproteinized human demineralized tooth matrix (dpDTM) and deproteinized bovine bone mineral (DBBM).

METHODS

Twenty-four patients who required lateral maxillary sinus floor augmentation with simultaneous dental implant placement were randomly assigned to receive either dpDTM (n = 12) or DBBM (n = 12). Cone-beam computed tomography and resonance frequency analysis of implant stability were conducted immediately after surgery and 6 months postoperatively. Changes in the graft sinus floor and graft height volumes in the sagittal and coronal views, along with the implant stability quotient (ISQ), were analyzed and compared.

RESULTS

Volumetric graft alteration was comparable between dpDTM (120.33 ± 77.48 mm3) and DBBM (108.51 ± 65.15 mm3) (p = 0.690). Reduction in the average graft height was also comparable: dpDTM group ranged from - 0.59 to - 0.93 mm and the DBBM group ranged from - 0.55 to - 0.82 mm (p > 0.05) at most examined levels. However, greater reduction in the mesial-graft height occurred in the dpDTM group (- 1.08 ± 0.70 mm vs. -0.58 ± 0.39 mm, p = 0.04). The ISQ values increased similarly in both groups to reach 70 at 6 months.

CONCLUSION

dpDTM demonstrated comparable stability in graft volume and height during the healing process compared to DBBM and could serve as a viable alternative to DBBM for sinus floor augmentation with simultaneous implant placement.

Retrospective Study of Maxillary Sinus Augmentation Using Demineralized Tooth Block Bone for Dental Implant

(1) Background: When placing implants in the maxillary posterior region with insufficient alveolar bone, a maxillary sinus elevation is necessary. Autogenous bone, though biologically ideal, poses risks and discomfort due to donor site harvesting. Block-type autogenous tooth bone graft material, made from the patient's own extracted tooth, offers similar biological stability without these drawbacks. (2) Methods: This study observed the progress of 19 implant patients who were treated with maxillary sinus elevation procedures using block-type autogenous tooth bone graft material at the Daegu Catholic University Medical Center. Extracted teeth were processed into demineralized tooth block bone. After elevating the sinus membrane, implants and the tooth bone graft material were placed in the space, and the bony window was repositioned. Postoperative evaluations through clinical observation and radiographic imaging assessed sinus membrane elevation, alveolar bone height increase, and implant osseointegration. (3) Results: Results showed proportional increases in alveolar bone height to the graft material size, with long-term stability. No postoperative complications occurred, even with sinus membrane perforation, and implants remained stable. (4) Conclusions: The study concludes that maxillary sinus lifts using block-type autogenous tooth bone graft material provide excellent bone induction and biocompatibility, making this a highly beneficial method for both dentists and patients.

Clinical outcomes and risk factor analysis of dental implants inserted with lateral maxillary sinus floor augmentation: A 3- to 8-year retrospective study

AIM

To evaluate the 3- to 8-year outcomes of dental implants placed with lateral sinus floor augmentation (LSFA) and to identify factors affecting implant survival.

MATERIALS AND METHODS

This retrospective study was performed by screening all implants placed with LSFA procedures, which were conducted between January 2012 and December 2016. Subantral bone gain (SABG) and apical bone height (ABH) were assessed using panoramic radiographs. The cumulative survival rate of implants was analysed using life-table analysis and Kaplan-Meier survival curves. The influential risk factors affecting survival were assessed using univariate log-rank tests and multivariable mixture cure rate model. Implant complications were recorded.

RESULTS

Based on the established criteria, a total of 449 patients (760 implants) were included in this study. In the 3- to 8-year follow-up (mean ± SD, 5.81 ± 1.33 years), 15 implants in 14 patients failed, with a CRS of 96.81% on an implant basis and 95.07% on a patient basis. A history of periodontitis and poor compliance with supportive periodontal treatment was associated with a significantly higher risk of implant failure at both implant and patient levels. Significant decreases in ABH occurred during each yearly interval except for 3 years. A similar trend has been observed for SABG at 1, 2, 6 and 8 years. The total complication rate was 31.84% on implant basis, with peri-implant mucositis (21.58%) being the most frequent biologic complication and porcelain cracking (5.00%) being the most common technical complication.

CONCLUSIONS

Implant with LSFA is a reliable treatment option in atrophic maxilla. A history of periodontitis without regular supportive periodontal treatment was identified as a predictor for implant failure. Slight but significant shrinkage of vertically augmented bone can be observed after implant placement.

Long-Term Volumetric Stability of Maxillary Sinus Floor Augmentation Using a Xenograft Bone Substitute and Its Combination with Autologous Bone: A 6+ Year Retrospective Follow-Up Study Using Cone Beam Computed Tomography

Deproteinised bovine bone (DBB) is widely used as bone substitute in maxillary sinus floor augmentation (MSFA) surgery. No previous studies have shown the long-term volumetric changes in the augmented bone when using DBB. The selected patients had MFSA performed using a lateral window technique and a xenograft, alone or in combination with the patient's autologous bone from the mandible. Cone beam computed tomography (CBCT) images were used to compare the volumetric changes in the augmented bone for patients over a period of 6 or more years. No significant bone reduction was seen in the augmented bone region when comparing MSFA after 7 months and 6 or more years after dental implantation.

Quantitative analysis of change in bone volume 5 years after sinus floor elevation using plate-shaped bone substitutes: a prospective observational study

PURPOSE

Tricalcium phosphate (TCP) has osteoconductive ability and reportedly offers similar clinical results as autogenous bone grafts in dental implant treatment. However, few reports quantify temporal changes in augmented bone volume after sinus augmentation. We aimed to establish a three-dimensional (3D) quantification method to assess bone volume after sinus augmentation and to evaluate biocompatibility of the TCP plate.

METHODS

Maxillary sinus floor augmentation was performed employing the lateral window technique, and plate-shaped β-TCP (TCP plate) was used instead of granular bone grafting materials. After lifting the sinus membrane, the TCP plate was inserted and supported by dental implants or micro-screws. The changes in bone volumes in the maxillary sinus before and after surgery were recorded using cone-beam computed tomography, saved as Digital Imaging and Communications in Medicine-formatted files, and transformed to Standard Triangle Language (STL)-formatted files. Pre- and post-operative STL data of bone volume were superimposed, and the augmented bone volume was calculated. Moreover, changes in bone volumes, TCP plate resorption rates, and bone heights surrounding the implants were three dimensionally quantified.

RESULTS

Fifteen implants in nine subjects were included in this study. TCP plates secured long-term space making, with results similar to those of granular bone substitutes. Newly formed bone was identified around the implant without bone graft material. TCP plate was absorbed and gradually disappeared.

CONCLUSIONS

A novel 3D quantification method was established to evaluate changes in bone volume. Clinical application of TCP plate in sinus augmentation could be a better procedure in terms of prognosis and safety.

Volumetric changes and graft stability after lateral window sinus floor augmentation: A randomized clinical trial

INTRODUCTION

The present investigation compared the stability and volumetric changes of two different grafting material used for lateral window sinus floor augmentation (LWSFA).

METHODS

Sixteen patients with a total 20 maxillary sinuses in need of LWSFA were included in the present study. The sinuses were grafted with either 100% anorganic bovine bone mineral (ABBM) alone (Group 1) or a mixture (0.8:1 ratio) of ABBM and mineralized cortical allograft (MCA) (Group 2). Cone beam computer tomography (CBCT) was obtained pre-operatively, and at 2-weeks, and 6-months after LWSFA to perform linear measurements including lateral window dimensions, sinus anatomy, residual bone height/thickness (RBH/RBT), and Schneiderian membrane thickness (SMT), among others. Three-dimensional segmentation analysis was used to evaluate changes of bone graft volume/height (GV/GH).

RESULTS

A total of 10 sinuses per group were included in the analysis. No statistically significant difference was found in between groups regarding mean reduction of GV (Group 1: 14.87% ± 16.60%, Group 2: 18.06% ± 9.81%, p = 0.33). Among the linear measurements, only SMT revealed a significant increase after 2-weeks more pronounce in Group 1 (8.70 mm) when compared with Group 2 (5.70 mm) with plausible effect upon LWSFA outcomes. Sinus width showed weak positive correlation with GH reduction after 6 months.

CONCLUSION

This study demonstrated that both ABBM alone and ABBM + MCA represent suitable alternatives for LWSFA with adequate graft stability as they revealed similar volumetric and linear dimensional changes 6 months postoperatively.

Clinical, radiographic, and histological/histomorphometric analysis of maxillary sinus grafting with deproteinized porcine or bovine bone mineral: A randomized clinical trial

OBJECTIVE

The present study aimed to compare histomorphometrically evaluated new bone formation, radiographically measured graft stability, and clinical implant outcome between maxillary sinus grafting with either deproteinized porcine bone mineral (DPBM) or deproteinized bovine bone mineral (DBBM).

MATERIALS AND METHODS

Thirty maxillary sinuses were initially included and randomly assigned to the test group (TG; DPBM, n = 15) or control group (CG; DBBM, n = 15). After a healing period (6 months), axially retrieved bone biopsies of the molar region were used for histological/histomorphometric analysis of new bone formations. Additionally, radiographically measured graft stability and clinical implant outcome were assessed.

RESULTS

Twenty-three sinus sites with 10 sinuses of the TG and 13 of the CG were ultimately available for data and statistical analysis. In the TG, a slightly, but yet significantly (p = .040) higher proportion of new bone formation (TG: 27.7 ± 5.6% vs. CG: 22.9 ± 5.1%) and a lesser (p = .019) amount of connective (non-mineralized) tissue (TG: 47.5 ± 9.5% vs. CG: 56.1 ± 9.5%) was found than in the CG. However, both xenografts showed comparable (n.s.) residual bone graft (TG: 23.7 ± 7.2% vs. CG: 21.1 ± 9.85.6%), bone-to-graft contacts (TG: 26.2 ± 9.8% vs. CG: 30.8 ± 13.8%), similar graft height reduction over time (TG: 12.9 ± 6.7% CG: 12.4 ± 5.8%) and implant survival/success rate (100%). At the 3-year post-loading evaluation, the peri-implant marginal bone loss (TG: 0.52 ± 0.19 mm; CG: 0.48 ± 0.15 mm) and the peri-implant health conditions (TG: 87.5%/CG: 81.2%) did not differ between implants inserted in both xenografts used.

CONCLUSIONS

The use of DPBM or DBBM for maxillary sinus augmentation is associated with comparable bone formation providing stable graft dimension combined with healthy peri-implant conditions.

Changes in bone graft height and influencing factors after sinus floor augmentation by using the lateral window approach: A clinical retrospective study of 1 to 2 years

STATEMENT OF PROBLEM

Recent systematic reviews have reported resorption of bone grafts after augmentation, but the influencing factors are numerous and uncertain. Different brands of bone graft and other factors may affect the bone formation effect after sinus floor augmentation.

PURPOSE

The purpose of this retrospective clinical study was to evaluate the graft material height changes after sinus floor augmentation with cone beam computed tomography (CBCT) and to investigate the potential influencing factors related to graft resorption.

MATERIAL AND METHODS

Four midsagittal cut CBCT images of 157 posterior maxillary implants after maxillary sinus floor elevation by using the lateral window approach with bone grafts from 116 patients were obtained. Four CBCT scans had been performed immediately (T0), 6 months (T1) and 12 months after bone grafting (T2), and 1.5 to 2 years after treatment (T3), and the distance between the implant platform and the grafted mucosa of the maxillary sinus floor was measured at 3 locations. Correlation coefficients of these parameters were calculated. A linear mixed model was used to investigate potential factors influencing graft height reduction, including the patient's sex, age, smoking status, periodontal status, graft brand, implant site, implant level, placement time, and residual bone height.

RESULTS

Mean ±standard deviation graft height at the mesial side of the implant (MeGH) was significantly decreased by 0.32 ±0.88 mm in the first 6 months, was gradually reduced after 6 months (0.26 ±0.43 mm), and then 1 to 2 years later increased to 0.39 ±0.97 mm. The changes in graft height at the center of the implant (CeGH) and graft height at the distal side (DiGH) groups were similar to those in the MeGH group. A significantly positive correlation was found among the height alterations in 3 locations (rs=0.954, P<.001). The linear mixed model showed that smoking was more likely to cause graft height reduction in MeGH (P=.034).

CONCLUSIONS

Graft height significantly decreased after maxillary sinus augmentation over 1 to 2 years. Smoking had a negative effect on graft height changes, while the 2 brands of graft and other factors had no significant effect.

Longitudinal Study of Bone Height Change between Two Approaches for Sinus Floor Elevation

Background and Objectives: The purpose of this study is to assess the long-term maintenance of each approach of sinus elevation, the crestal approach and lateral approach, by comparing the radiographic results of each technique. Materials and Methods: In total, 103 patients who had undergone an implant procedure with either the crestal approach or lateral approach method applied to their maxillary molar edentulous area were included. Using orthopantomographs, the radiographic changes were consistently evaluated over 3 years after the procedure (immediately after procedure and 1 year, 2 years and 3 years after implant placement) Results: The radiographic evaluation after 3 years of implantation with sinus elevation showed a significant amount of bone formation (8.07 mm for crestal approach and 12.00 mm for lateral approach method). The largest amount of grafted height loss occurred during the 1 year, but the resorption was minimal (0.98 mm for crestal approach and 0.95 mm for lateral approach method) over the entire 3 years. Conclusions: Although the lateral approach showed more bone growth, the amount of bone resorption was similar to that of the crestal approach. Both methods showed the highest amount of bone resorption in the first year, and the amount of change thereafter was insignificant. It is judged that both methods can be used according to the situation to help implant placement.

CBCT for Diagnostics, Treatment Planning and Monitoring of Sinus Floor Elevation Procedures

Sinus floor elevation (SFE) is a standard surgical technique used to compensate for alveolar bone resorption in the posterior maxilla. Such a surgical procedure requires radiographic imaging pre- and postoperatively for diagnosis, treatment planning, and outcome assessment. Cone beam computed tomography (CBCT) has become a well-established imaging modality in the dentomaxillofacial region. The following narrative review is aimed to provide clinicians with an overview of the role of three-dimensional (3D) CBCT imaging for diagnostics, treatment planning, and postoperative monitoring of SFE procedures. CBCT imaging prior to SFE provides surgeons with a more detailed view of the surgical site, allows for the detection of potential pathologies three-dimensionally, and helps to virtually plan the procedure more precisely while reducing patient morbidity. In addition, it serves as a useful follow-up tool for assessing sinus and bone graft changes. Meanwhile, using CBCT imaging has to be standardized and justified based on the recognized diagnostic imaging guidelines, taking into account both the technical and clinical considerations. Future studies are recommended to incorporate artificial intelligence-based solutions for automating and standardizing the diagnostic and decision-making process in the context of SFE procedures to further improve the standards of patient care.

Long-Term Results after Placing Dental Implants in Patients with Papillon-Lefèvre Syndrome: Results 2.5-20 Years after Implant Insertion

Aim: A retrospective evaluation of patients with Papillon-Lefèvre syndrome (PLS) treated with dental implants to identify factors that may influence treatment outcomes. Methods: All PLS patients with dental implants currently registered at the Department of Periodontology, Goethe-University Frankfurt (20–38 years; mean: 29.6 years), were recruited. Five patients from three families (two pairs of siblings) with a total of 48 dental implants (inserted in different dental institutions) were included with a follow-up time of 2.5–20 years (mean: 10.4 years). Results: Implant failure occurred in three patients (at least 15 implants). Nearly all patients demonstrated peri-implantitis in more or less advanced stages; 60% of patients demonstrated bone loss ≥50% around the implants. Two patients did not follow any supportive therapy. Conclusions: Implants in PLS patients who did not follow any maintenance programme had a high risk of peri-implantitis and implant loss.

Radiographic Analysis of Graft Dimensional Changes after Lateral Maxillary Sinus Augmentation with Heterologous Materials and Simultaneous Implant Placement: A Retrospective Study in 18 Patients

Background: This investigation aimed to radiographically assess the variations of graft dimension following maxillary sinus augmentation by the lateral approach. Methods: Eighteen patients (seven males), with a mean age at surgery of 66.5 ± 9.8 (range 52−82) years, were unilaterally treated. Thirty-five dental implants were positioned in the posterior maxilla simultaneously to grafting with heterologous biomaterials. Intraoral radiographs taken at the time of surgery, after six months, and at the longest follow-up (up to nine years after implant placement) were analyzed. The following distances were measured: mesio-distal width of the graft, vertical distance from implant apex to most coronal level of the graft, distance from the mesial aspect of the (mesial) implant to the mesial graft extension; distance from the distal aspect of the (distal) implant to the distal graft extension, and graft height along the implant axis. The dimensional changes with respect to baseline, after six months and at the longest follow-up were calculated. Results: The patient-based mean follow-up was 38.3 ± 30.1 months (range 12−108 months). The mean residual bone height at the mesial and distal aspect of the implants was 3.19 ± 2.05 mm and 2.65 ± 1.60 mm, respectively (p = 0.38). The mean graft width at baseline was 27.95 ± 5.23 mm, and the mean graft width reduction was 10.2 ± 12.7% (2.98 ± 3.62 mm) and 11.3 ± 14.4% (3.36 ± 4.08 mm) at six months and at the latest follow-up. The change was significant at six months (p = 0.005), but did not show significant further variation (p = 0.11). On the mesial and distal aspect, the mean graft extension decreased by 1.56 ± 2.67 mm and 0.84 ± 2.71 mm at the latest follow-up. No significant difference between mesial and distal changes was found (p = 0.24), suggesting that the biomaterial is resorbed homogeneously on both sides. The mean graft height was 11.92 ± 2.53 mm at baseline and decreased by 9.3 ± 9.05% (1.11 ± 1.09 mm) at six months (p < 0.001). Non-significant further changes were found at the latest follow-up (p = 0.10). Conclusions: after early remodeling, heterologous bone substitutes showed a good dimensional stability in the mid-term for maxillary sinus augmentation.

Radiographic Analysis of Graft Dimensional Changes in Transcrestal Maxillary Sinus Augmentation: A Retrospective Study

Background. The maxillary sinus lift is a popular and predictable technique associated with implant-supported rehabilitation of the severely atrophic maxilla. The aim of the present retrospective study was to investigate the effectiveness of transcrestal maxillary sinus augmentation and the graft resorption pattern using different heterologous bone substitutes. Methods. A total of 75 sinus-grafting procedures were performed and 89 implants were placed in 66 patients, 24 males and 42 females, with mean age 67.9 ± 10.64 years (range 43−84 years). Nineteen subjects were smokers. The mean follow-up period was 93.33 ± 54.71 months (range 14−240 months). Clinical and radiographical evaluations were performed. Graft height and width were measured at baseline and at the latest follow-up. Results. Mesiodistal and vertical resorption averaged 9.3 ± 20.7% (standard deviation), and 5.04 ± 9.9% of the postoperative size, respectively, considering the graft as the unit. Linear regression analysis showed that graft resorption in both the vertical and the mesiodistal dimension is independent of the follow-up time. Conversely, there was a trend for greater resorption when increasing the postoperative graft size, in both vertical (p = 0.001) and horizontal (p = 0.007) dimensions. When grouping the dimensional changes by graft particle size (only small (<300 μm) particles, combination of small and medium (>500 μm)/large (>1000 μm) particles, and only medium/large particles), there was a trend for greater resorption associated with smaller particles, but it was not significant; neither in the mesiodistal nor in the vertical dimension (p = 0.17 and p = 0.25, respectively). No implant was lost during the observation period. In conclusion, the transcrestal technique for maxillary sinus augmentation documented a high level of predictability. The low clinical morbidity and the contextual dental implant positioning is clinically useful in relation to a significant reduction of the time required for implant restoration, a consistent decrease of the number of surgical phases, and a cost-effectiveness approach for the rehabilitation. The graft resorption pattern in all cases was compatible with persistent implant protection and support.

Osteotome-Induced Blood Clot and Subsequent Bone Formation with the Use of Collagen Sponge for Integration of Single Dental Implants into the Atrophied Posterior Maxilla: A Retrospective Follow-Up of 36 Implants after 5 to 13 years

Background

Atrophy of the posterior maxilla as a consequence of tooth loss and sinus pneumatization is a frequent condition encountered in the clinical practice. Prosthetic rehabilitation with implants in these patients often requires some kind of bone regeneration procedure to increase the bone volume.

Aim

The aim of the present retrospective study is to analyze the survival and success rates of a series of implants placed in the atrophic posterior maxilla with a transcrestal osteotome procedure, without placing a bone grafting material.

Materials and Methods

From 2006 to 2014, 36 dental implants (Neoss Ltd., Harrogate, UK) were inserted in 36 patients with at least 4 mm of bone below the maxillary sinus using transcrestal osteotome sinus floor elevation and placement of collagen sponge below the sinus membrane. ISQ measurements were made after implant placement and at abutment surgery after 4 to 6 months. The vertical bone height (VBH) was evaluated in intraoral radiographs taken prior to surgery and in radiographs from annual check-up appointments 5 to 13 years after implant placement. In addition, marginal bone loss (MBL) was evaluated.

Results

One implant was lost after four years of prosthetic loading. The remaining 35 implants showed no complications and were loaded with single crowns after 4–6 months of healing. All 35 implants showed clinical success after 8.5 ± 2.8 years of prosthetic loading (from 5 to 13 years). The vertical bone height was 5.9 ± 1.4 mm at surgery, 9.7 ± 1.1 mm at second surgery after 4–6 months, and 8.3 ± 1.8 at the follow-up at 8.5 ± 2.8 years (from 5 to 13 years). The implant stability registered was 73.2 ± 6.2 ISQ at the surgery and 75.8 ± 3.9 at the second surgery after 4–6 months.

Conclusions

The present long-term follow-up study showed that the crestal approach for sinus floor bone augmentation without additional bone grafting results in predicable bone formation and high implant survival. The osteotome technique is a valid alternative to the more invasive lateral window technique in single cases with a minimum of 4 mm of VBH below the maxillary sinus.

Influence of anatomical factors related to maxillary sinus on outcomes of transcrestal sinus floor elevation

Background/purpose

Graft bone maturation and remodeling in the maxillary sinus require adequate angiogenesis and osteoprogenitor cells migration from the surrounding bony walls and Schneiderian membrane. This study aimed to evaluate the influence of anatomical factors related to maxillary sinus on the outcomes of transcrestal sinus floor elevation using cone-beam computed tomography (CBCT).

Materials and methods

Forty-five patients (63 elevated sites) were included in this study. CBCT were obtained preoperatively, immediately and 6 months after surgery. The anatomical features of residual bone height, maxillary sinus width, maxillary sinus angle and Schneiderian membrane thickness were measured on preoperative CBCT. Descriptive statistics and correlation analysis were conducted to evaluate the influence of anatomical factors on outcome parameters, including sinus lift height, graft bone resorption and marginal bone loss.

Results

The results showed that there was a positive correlation between sinus width and graft bone resorption. A significantly positive correlation between sinus angle and graft bone resorption was also found.

Conclusion

Our findings indicate that the anatomical factors of maxillary sinus (sinus width and sinus angle) have influence on the linear change of bone grafts after transcrestal sinus floor elevation.

Evaluation of regeneration after the application of 2 types of deproteinized bovine bone mineral to alveolar bone defects in adult dogs

Purpose

The aim of this study was to evaluate the preclinical results of 2 types of commercially available deproteinized bovine bone mineral (DBBM) when applied to alveolar bone defects in dogs.

Methods

This study was conducted using 6 beagles. Alveolar defects in the mandible were formed and filled with 2 DBBMs produced by a similar procedure. Defects were randomly assigned to be filled using DBBM 1 or 2. All defects were covered with a collagen membrane and had a healing period of 12 weeks. After the dogs were sacrificed, histological, histomorphometric, and linear/volumetric analyses were performed.

Results

Both DBBM groups showed similar histological findings, demonstrating that bone remodeling had occurred and new bone had formed. The residual bone particles were surrounded by newly formed vital bone. In the histomorphometric analysis, the ratio of the area of vital bone and residual bone substitute in DBBM 2 (38.18% and 3.47%, respectively) was higher than that of DBBM 1 (33.74% and 3.41%, respectively), although the difference was not statistically significant. There were also no statistically significant differences between both groups in linear and volumetric analyses using micro-computed tomography scans and digitized images of dental casts.

Conclusions

In the present study, DBBM 1and 2, which were produced by similar processes, showed similar results in histological, histomorphometric, and volumetric analyses. Further studies are needed to identify more specific differences between the 2 DBBMs.

Radiographic and Histomorphometric Evaluation of Biomaterials Used for Lateral Sinus Augmentation: A Systematic Review on the Effect of Residual Bone Height and Vertical Graft Size on New Bone Formation and Graft Shrinkage

The aim of the present systematic review was to investigate the effect of residual bone height (RBH) and vertical bone gain on new bone formation (NBF) and graft shrinkage after lateral sinus lifts using different biomaterials.

METHODS

An electronic search was conducted on three databases to identify randomized controlled trials (RCTs) published until January 2021 with at least one follow-up at 6 months and at least five patients treated, comparing biomaterials used for maxillary sinus augmentation with a lateral approach. Graft volumetric changes, RBH, vertical bone gain, implant failure, and post-operative complications were evaluated. The risk of bias was assessed using the Cochrane tool.

RESULTS

We used 4010 identified studies, of which 21 were RCTs. Overall, 412 patients and 533 sinuses were evaluated. Only three publications had an overall low risk of bias. After 6 months, xenograft (XG) showed the least volume reduction (7.30 ± 15.49%), while autogenous graft (AU) was the most reabsorbed (41.71 ± 12.63%). NBF appeared to not be directly correlated with RBH; on the contrary, the overall linear regression analysis showed that NBF significantly decreased by 1.6% for each mm of postoperative vertical graft gain. This finding suggests that the greater the augmentation, the lower the NBF. A similar tendency, with a regression coefficient even higher than the overall one, was also observed with alloplast (AP) and XG.

CONCLUSIONS

The present results suggested that NBF was essentially independent of preoperative bone height. On the contrary, the smaller the volume was of the graft placed, the higher the amount of new bone formed, and the smaller the graft shrinkage was. Minimizing the augmentation volume might be beneficial to graft healing and stability especially when using AP and XG.

Maxillary Sinus Floor Augmentation with Autogenous Bone Graft Compared with a Composite Grafting Material or Bone Substitute Alone: a Systematic Review and Meta-Analysis Assessing Volumetric Stability of the Grafting Material

Objectives

Test the hypothesis of no difference in the volumetric stability of the grafting material following maxillary sinus floor augmentation with autogenous bone graft compared with composite grafting material or bone substitute alone applying the lateral window technique.

Material and Methods

MEDLINE (PubMed), Embase, Cochrane library and hand-search of relevant journals were conducted. Human studies published in English until the 9^th of October 2020 were included. Outcome measures included three-dimensional volumetric changes of the grafting material and potential predictive parameters. Volumetric changes were evaluated by descriptive statistics and meta-analysis including 95% confidence interval.

Results

Electronic search and hand-searching resulted in 102 entries. Four randomized controlled trials with unclear risk of bias fulfilled the inclusion criteria. The volumetric stability of the grafting material was significantly improved by mixing autogenous bone graft with a non-resorbable xenograft compared with autogenous bone graft. Meta-analyses assessing absolute and relative volumetric changes demonstrated no significant differences between autogenous bone graft compared with allogeneic bone graft, synthetic biomaterials combined with autogenous bone graft or used alone. Association between volumetric changes of the grafting material and potential predictive parameters were not assessed in the included studies.

Conclusions

Volumetric reduction of the augmented area seems inevitable following maxillary sinus floor augmentation regardless of the grafting material. The volumetric stability of autogenous bone graft is improved with addition of xenograft compared with autogenous bone graft. However, conclusions drawn from this systematic review should be interpreted with caution since only four studies using three-dimensional radiographic measurements were included.

Comparison of the performances of low-crystalline carbonate apatite and Bio-Oss in sinus augmentation using three-dimensional image analysis

BACKGROUND

In locations where the alveolar bone height is low, such as at the maxillary molars, implant placement can be difficult, or even impossible, without procedures aimed at generating new bone, such as sinus lifts. Various types of bone graft materials are used after a sinus lift. In our study, a three-dimensional image analysis using a volume analyzer was performed to measure and compare the volume of demineralized bovine bone mineral (Bio-Oss®) and carbonate apatite (Cytrans®) after a sinus lift, as well as the amount of bone graft material resorption. Patient data were collected from cone-beam computed tomography images taken before, immediately following, and 6 months after the sinus lift. Using these images, both the volume and amount of resorption of each bone graft material were measured using a three-dimensional image analysis system.

RESULTS

The amount of bone resorption in the Bio-Oss®-treated group was 25.2%, whereas that of the Cytrans®-treated group was 14.2%. A significant difference was found between the two groups (P < 0.001).

CONCLUSIONS

Our findings indicate that the volume of bone resorption was smaller in the Cytrans®-treated group than in the Bio-Oss®-treated group, suggesting that Cytrans® is more promising for successful implant treatments requiring a sinus lift.

Sinus Floor Elevation via an Osteotome Technique without Biomaterials

According to classic Hirschfeld studies, the first teeth to be lost are the first and second maxillary molars. After the teeth are extracted and the alveolar process is developed, the maxillary sinus is reabsorbed and pneumatized with a decrease in bone availability in the posterior sector of the maxilla. This process often creates the need to perform regeneration techniques for the placement of implants in this area due to the low availability of bone. The most frequently used and documented technique for the elevation of the sinus maxillary floor is elevation by the side window, as proposed by Tatum. In 1994, Summers proposed a technique that allowed the elevation of the sinus floor from a crestal access using an instrument called an osteotome, as well as the placement of the implant in the same surgical act. The aimed of the study was to evaluate the survival of 32 implants placed in posterior maxilla with bone availability less than 5 mm performing a sinus lift augmentation technique with osteotome without biomaterials. The results of this study show a survival rate of 100% for 32 implants placed in situations with an initial bone availability of 2 to 5 mm without the use of graft material. The infra-drilling technique used offers an increase in the primary stability of implants that allows adequate osteointegration Implants placed were charged at 12 weeks. In all cases, spontaneous bone formation was observed, even in cases where a positive Valsalva maneuver was observed. This proposed technique reduces treatment time and the need for more invasive maxillary sinus augmentation techniques.

The comparative evaluation of transcrestal and lateral sinus floor elevation in sites with residual bone height ≤6 mm: A two-year prospective randomized study

OBJECTIVES

To compare clinical and radiographic outcomes between transcrestal sinus floor elevation (TSFE) and lateral sinus floor elevation (LSFE) approaches of simultaneous implant placement in atrophic maxilla.

MATERIALS AND METHODS

Patients with a residual bone height (RBH) ≤6 mm were enrolled and randomly assigned to TSFE and LSFE groups. Patients in both groups simultaneously underwent sinus floor elevation with bovine-derived xenograft and implant placement. Clinical and radiographic results were evaluated immediately after surgery and after 6, 12, 18, and 24 months. The endo-sinus bone gain (ESBG), apical implant bone height (ABH), endo-sinus bone-implant contact rate (EBICR), and crestal bone level (CBL) were assessed using panoramic radiographs.

RESULTS

Forty-one implants (TSFE: 21, LSFE: 20) were placed in cases with a mean RBH of 3.77 ± 1.16 mm. All implants obtained clinical success and satisfactory ESBG at 24 months. No significant differences were found in ESBG and ABH between two groups immediately after surgery, but LSFE group showed significantly higher values than TSFE group thereafter. Grafts in TSFE group reached stability 6 months earlier than that in LSFE group. In both groups, EBICR was almost 100%, and CBL showed no detectable changes.

CONCLUSIONS

LSFE can achieve higher ESBG 2 years after surgery. Otherwise, TSFE could be an alternative to LSFE, when the access for lateral window preparation is limited. Both approaches were highly predictable for RBH ≤6 mm during 24-month observation period for the implants placed simultaneously.

Bacterial Nanocellulose in Dentistry: Perspectives and Challenges

Bacterial cellulose (BC) is a natural polymer that has fascinating attributes, such as biocompatibility, low cost, and ease of processing, being considered a very interesting biomaterial due to its options for moldability and combination. Thus, BC-based compounds (for example, BC/collagen, BC/gelatin, BC/fibroin, BC/chitosan, etc.) have improved properties and/or functionality, allowing for various biomedical applications, such as artificial blood vessels and microvessels, artificial skin, and wounds dressing among others. Despite the wide applicability in biomedicine and tissue engineering, there is a lack of updated scientific reports on applications related to dentistry, since BC has great potential for this. It has been used mainly in the regeneration of periodontal tissue, surgical dressings, intraoral wounds, and also in the regeneration of pulp tissue. This review describes the properties and advantages of some BC studies focused on dental and oral applications, including the design of implants, scaffolds, and wound-dressing materials, as well as carriers for drug delivery in dentistry. Aligned to the current trends and biotechnology evolutions, BC-based nanocomposites offer a great field to be explored and other novel features can be expected in relation to oral and bone tissue repair in the near future.

Considerations for Clinical Use of Concentrated Growth Factor in Maxillofacial Regenerative Medicine

Different strategies have been utilized to facilitate mineralized/soft tissues. Concentrated growth factor (CGF) emerges as a promising biomaterial for regenerative therapy due to high levels of platelets, growth factors, and nucleated cells entrapped in the fibrin scaffold. This review aimed to collect extensive studies on CGF used in maxillofacial regenerative medicine, discussing current obstacles, and expressing some considerations of CGF use. Articles were retrieved systematically without time limitation. In total, 27 human studies were included and separated accordingly. In general, CGF has been most evaluated in implant related therapy and maxillofacial bone regeneration where a majority of articles have revealed favorable outcomes. Little studies have supported the effects on improving probing periodontal depth reductions and clinical attachment level gains for intrabony and furcation defect regeneration. Very little data with high-level evidence was available directly to investigate its effects on the soft tissue regeneration and postoperative complications reduction. The evidence supporting the clinical efficacy of CGF in maxillofacial regenerative medicine is limited. Some conflicting results are worrisome. In addition, the characterization of CGF preparation protocols and CGF's components was not performed in most studies. Further studies should make a consensus on standardized end-product of CGF including characterization of protocols and optimal ratio of CGF' components. Defined algorithms and evidence-based protocols for the clinical use of CGF should be also available.

Grafted bone remodeling following transcrestal sinus floor elevation: A cone-beam computed tomography study

Background

Transcrestal sinus floor elevation is a reliable procedure when additional bone height is needed for maxillary implant placement. However, the grafted bone undergoes remodeling and the dimensional stability of grafted bone height may be affected by several clinical factors, including graft material, sinus anatomy and the morphology of grafted space.

Methods

This retrospective study examined patients who had undergone transcrestal sinus floor elevation with synthetic biphasic calcium phosphate and single implant placement. The reduction of sinus graft height (GHR) after 6–8 months healing period was measured with cone-beam computed tomography (CBCT) images. Correlating factors, including vertical amount of implant protrusion (IP), sinus width, and the morphology of grafted space were analyzed by Spearman's correlation test.

Results

A total of 25 implant sites were analyzed. The mean GHR was 0.57 ± 0.49 mm, which was positively correlated with IP, vertical elevation height (VEH), and the ratio of vertical to horizontal elevation of the grafted space. However, GHR was not correlated with sinus width and mesial-distal or buccal-palatal width of the grafted space.

Conclusions

Synthetic biphasic calcium phosphate used in transcrestal sinus floor elevation underwent shrinkages and graft remodeling. Grafted height reduction was associated with IP, VEH, and the ratio of vertical to horizontal elevation of the grafted space.

Long-term outcomes of osteotome sinus floor elevation with or without bone grafting: The 10-year results of a randomized controlled trial

AIMS

To assess the long-term clinical and radiographic results of implants placed using osteotome sinus floor elevation (OSFE) with or without bone grafting.

MATERIALS AND METHODS

Forty-five patients were randomly assigned into two groups: Group 1 (OSFE with deproteinized bovine bone mineral) and Group 2 (OSFE without grafting). The patients were recalled at 1, 3, 5 and 10 years after surgery. The implant survival, endo-sinus bone gain (ESBG), marginal bone loss (MBL), peri-implant bone height (PBH, distance from the most coronal level to the most apical level of bone-to-implant contact), prosthesis survival and hardware complications, and peri-implant soft tissue conditions were assessed.

RESULTS

Forty patients attended the 10-year examination. Mean residual bone height was 4.58 ± 1.28 mm. The 10-year cumulative survival rate was 90.7% for Group 1 and 95.0% for Group 2. The PBH was 5.89 ± 1.24 mm for Group 1 and 5.74 ± 1.43 mm for Group 2 at 10 years. The ESBG of both groups remained stable after 3 years. Two-thirds of the implants were free of hardware complications. No significant differences in MBL and peri-implant tissue parameters were found.

CONCLUSION

OSFE with or without grafting both yielded predictable clinical outcomes with similar PBH (ClinicalTrials.gov. NCT01619956).

Bone Formation in Grafts with Bio-Oss and Autogenous Bone at Different Proportions in Rabbit Calvaria

Background

The aim of this study was to assess the volumetric stability and bone formation in grafts with Bio-Oss and autogenous bone at different proportions in rabbit calvaria. Material and Methods. Ten rabbits received four titanium cylinders in their calvaria and randomly divided into the following groups: Group I: Bio-Oss (100%), Group II: Bio-Oss (75%) + autogenous bone (25%), Group III: Bio-Oss (50%) + autogenous bone (50%), and Group IV: autogenous bone (100%). After twelve weeks, the animals were euthanized, and samples were collected for clinical and histological analysis.

Results

Clinical analysis showed that Groups I (90.43 ± 8.99) and II (90.87 ± 7.43) had greater dimensional stability compared to Group IV (P=0.0005). Histologically, Groups I, II, and III showed areas of bone formation with particles of biomaterial remaining in close contact with the newly formed bone. However, there were no significant differences between the groups regarding the newly formed bone area.

Conclusion

It was concluded that the use of Bio-Oss either alone or associated with the autogenous bone at a proportion of 25% showed superior dimensional stability compared to the use of autogenous bone in the proposed experimental model.

Comparison between Micro-Computed Tomography and Cone-Beam Computed Tomography in the Assessment of Bone Quality and a Long-Term Volumetric Study of the Augmented Sinus Grafted with an Albumin Impregnated Allograft

The purpose of our study was to compare micromorphometric data obtained by cone-beam computed-tomography (CBCT) and microcomputed-tomography (micro-CT) of the augmented sinus and to evaluate the long-term stability of the bone gain achieved using BoneAlbumin. Sinus lifts, and after 6-months, healing bone-biopsy and implant placement were carried out. Specimens were analyzed by micro-CT. A total of 16 samples were collected from nine patients (mean age 54.7 ± 6.5 years). Pre-, postoperative, and 3-year control CBCT-data were registered to determine from where the biopsy samples were harvested. Micromorphometric variables were calculated from the micro-CT- and CBCT-data, and their correlation was determined by Spearman's test. The volume of augmented bone was calculated at the time of implant placement and after 3 years. A positive correlation was found between bone-volume fraction, trabecular-separation, open-, and total-porosity, while a negative correlation was found between trabecular-thickness obtained from CBCT- and micro-CT-data (p < 0.05). Mean volumetric reduction of 39.28% (11.88-60.02%) was observed. Correlation of CBCT- and micro-CT-data suggested that micromorphometric analysis of CBCT reconstructions of the augmented sinuses provided reliable information on the microarchitecture of augmented bone. CBCT as a modality might be adequate in the analysis of bone quality in the augmented sinus. At the 3-year, control sinus grafts showed volumetric stability.

Efficacy of Dental Implants Placements between Lateral and Crestal Sinus Lift Techniques: A Split-Mouth Study

Background:

Bone atrophy and pneumatization of the maxillary sinus resulting from tooth loss, associated with low bone density in the region, do not usually allow adequate quantity and quality for the installation of osseointegrated implants.

Objective:

To evaluate the efficacy of crestal and lateral sinus lift techniques which are performed on same patients.

Materials and Methods:

Ten patients who required both crestal and lateral approaches in 20 sinus lifts were selected; 31 endosseous dental implants were placed into these patients, with a reported timeline for each approach. Assessment of the surgical procedures in all patients was done using a Visual Analog Scale (VAS). Clinical and radiographic parameters, including Pocket Probing Depth (PPD), distance between the implant shoulder and the mucosal margin (DIM) and distance between the implant shoulder and first visible bone-implant contact (DIB), were analyzed to compare implant survival for both approaches.

Results:

All implants were successfully osseointegrated. No significant differences were observed between lateral and crestal approaches in PPD, DIM and DIB (p-values = 0.0504, 0.7784 and 0.18170, respectively), and in the total VAS scores (p-value ≥ 0.05). Most of the patients preferred the crestal approach due to the delay in implant placements with the lateral approach.

Conclusion:

Evaluation of the sinus floor elevation is more precise when both techniques are performed on the same patient. Furthermore, although post-operative vertigo is a major concern with the crestal approach; patients preferred this approach over the lateral technique because it is less invasive and required less time for the procedure.

Automatic three-dimensional analysis of bone volume and quality change after maxillary sinus augmentation

INTRODUCTION

Maxillary sinus augmentation is a widely used surgical procedure to increase the bone volume before implant placement. In order to predict the stability of the implant, analysis of the change in bone volume and quality after a sinus graft procedure is necessary. The purpose of this study was to analyze the change in volume and quality of bone graft material after maxillary sinus augmentation using cone beam computed tomography (CBCT).

METHODS AND MATERIALS

Maxillary sinus lift procedures using bovine bone materials (Bio-Oss, Geistrich, Swiss) without immediate implantation were performed at the Pusan National University Dental Hospital in 22 patients, from 2014 to 2017. CBCT images were captured before surgery (T1), a day after surgery (T2), and after 4 to 7 months at follow-up (T3). The T2 and T3 images were registered to the T1 image using histogram matching and intensity-based registration. A total of 30 sinuses were analyzed three-dimensionally (3-D), using self-made software MATLAB 2018a (MathWorks, Natick, Massachusetts). The volume and structural indices of the bone graft material were measured and analyzed.

RESULTS

The average volume of graft material showed a decrease, while the average gray value showed an increase during the follow-up period, but these changes were not statistically significant. The structural indices of the graft material after histogram matching showed a significant difference in homogeneity, connectivity, thickness, and roughness at the postoperative follow-up.

CONCLUSIONS

The volume and gray value showed no statistically significant changes after the maxillary sinus lift procedures. The results of this study show that structural analysis using histogram matching can be used as a promising tool to analyze the quality of graft materials.

Sinus bone graft and simultaneous vertical ridge augmentation: case series study

Background

This study aims to examine the outcome of simultaneous maxillary sinus lifting, bone grafting, and vertical ridge augmentation through retrospective studies.

Methods

From 2005 to 2010, patients with exhibited severe alveolar bone loss received simultaneous sinus lifting, bone grafting, and vertical ridge augmentations were selected. Fifteen patients who visited in Seoul National University Bundang Hospital were analyzed according to clinical records and radiography. Postoperative complications; success and survival rate of implants; complications of prosthesis; implant stability quotient (ISQ); vertical resorption of grafted bone after 1, 2, and 3 years after surgery; and final observation and marginal bone loss were evaluated.

Results

The average age of the patients was 54.2 years. Among the 33 implants, six failed to survive and succeed, resulting in an 81.8% survival rate and an 81.8% success rate. Postoperative complications were characterized by eight cases of ecchymosis, four cases of exposure of the titanium mesh or membrane, three cases of peri-implantitis, three cases of hematoma, two cases of sinusitis, two cases of fixture fracture, one case of bleeding, one case of numbness, one case of trismus, and one case of fixture loss. Prosthetic complications involved two instances of screw loosening, one case of abutment fracture, and one case of food impaction. Resorption of grafted bone material was 0.23 mm after 1 year, 0.47 mm after 2 years, 0.41 mm after 3 years, and 0.37 mm at the final observation. Loss of marginal bone was 0.12 mm after 1 year, and 0.20 mm at final observation.

Conclusions

When sinus lifting, bone grafting, and vertical ridge augmentation were performed simultaneously, postoperative complications increased, and survival rates were lower. For positive long-term prognosis, it is recommended that a sufficient recovery period be needed before implant placement to ensure good bone formation, and implant placement be delayed.

Biological and technical outcomes of restored implants after maxillary sinus augmentation-Results at 1-year loading

OBJECTIVE

To report biological and technical outcomes of implant-supported restorations placed into previously maxillary sinus floor augmentation using the lateral wall approach (MSA) using anorganic bovine bone mineral (ABBM) + autogenous bone (AB) (control group) or collagen-stabilized ABBM (test group).

MATERIALS AND METHODS

Single implant was placed 6 months after MSA in 27 control and 26 test patients. Fixed restorations were delivered 12 weeks later and reviewed 12 months after function. Outcomes measured included implant survival, marginal bone levels (DIB), peri-implant parameters, and incidence of biological and technical complications.

RESULTS

Seven patients (three control, four test group) did not return for their 1-year review. No significant inter-group differences were noted for all parameters. At baseline (3 months after implant placement), a mean(SD) marginal bone loss of 0.66 mm (0.40) and 0.77 mm (0.48) from the implant shoulder was recorded in the control and test group, respectively. After 12 months of loading, a mean (SD) additional marginal bone loss of 0.32 mm (0.24) and 0.35 mm (0.23) was noted in the control and test group, respectively. Peri-implant mucositis (≥1 site BOP) was diagnosed in 62.9% of control and 69.23% of test patients. No peri-implantitis was diagnosed. Screw retention and single crowns predominated. Technical complications mostly comprised of ceramic veneer chipping and were noted in 7.4% of control and 11.54% of test patients.

CONCLUSION

Based on a short observation period, implant reconstruction of the partially edentulous posterior maxilla after MSA using ABBM + AB or collagen-stabilized ABBM led stable marginal bone levels, high prevalence of peri-implant mucositis, and low rates of technical complications.

The Use of Tooth Derived Bone Graft Materials in Sinus Augmentation Procedures: a Systematic Review

OBJECTIVES

The goal of this systematic review was to assess the current literature about sinus augmentation procedure using different types of tooth derived bone graft materials, thorough analysing the outcomes of sinus grafting with tooth grafts compared to sinus grafting with xenografts, allografts and alloplasts by radiography and histomorphometry.

MATERIAL AND METHODS

An electronic search in the MEDLINE (NCBI PubMed and PubMed Central) database was conducted to identify articles concerning application of tooth bone grafts in sinus augmentation. The search was restricted to English language articles published in the last 10 years (December 2009 to March 2019).

RESULTS

In total, 21 articles were found, out of which 7 met the inclusion criteria and were included in the final synthesis. According to the type of diagnostic tool, data about graft material outcome in sinus was extracted, and included the residual alveolar height, augmented graft height, resorption height as seen in panoramic radiography and histomorphometric analysis of new bone formation and residual graft material.

CONCLUSIONS

Within the limitations of our review, we suggest that tooth derived graft materials are as successful as xenografts, allografts and alloplasts in sinus augmentation procedures according to the radiographic and histomorphometric showings. Additional wider research should be conducted in order to determine whether tooth derived graft materials are superior to the currently used materials.

Clinical outcome and factors determining new bone formation in lateral sinus membrane elevation with simultaneous implant placement without grafting material: A cross-sectional, 3-17 year follow-up study

BACKGROUND

Lateral sinus membrane elevation with simultaneous implant placement without grafting material (graft-less LSFE) is a widely investigated method for bone augmentation of the maxillary sinus floor. Long-term follow-up studies are rare.

PURPOSE

This study aimed to investigate the long-term effects of implants placed with graft-less LSFE.

MATERIALS AND METHODS

The study group was comprised of 111 patients previously treated with graft-less LSFE. The first follow-up visit, which occurred after a mean of 5 years after surgery, included a clinical examination, cone beam computerized tomography, and panorama or intraoral radiography. The second follow-up included panorama or intraoral radiography, and it was conducted after a mean of 8 years.

RESULTS

Overall, 218 implants were placed in 127 sinuses. Nine of the 218 implants failed resulting in an overall implant survival of 95.9%. The average bone gain at the follow-up was 4.0 ±2.0 mm.

CONCLUSION

The implant-supported rehabilitation achieved using graft-less LSFE was stable over time, and there was no or little impact on sinus health. Furthermore, it was concluded that the new bone formation and the amount of bone gain is proportional to the length of the implant protruding into the sinus cavity.

Maxillary sinus augmentation using biphasic calcium phosphate: dimensional stability results after 3-6 years

Purpose

This study was designed to observe the resorption pattern of biphasic calcium phosphate (BCP) used for maxillary sinus augmentation over a 3- to 6-year healing period, and to investigate factors affecting the resorption of BCP.

Methods

A total of 47 implants placed in 27 sinuses of 22 patients were investigated. All patients had residual bone height less than 5 mm at baseline. The modified Caldwell-Luc approach was used to elevate the maxillary sinus membrane, and the sinus cavity was filled with BCP (70% hydroxyapatite and 30% β-tricalcium phosphate). Implant placement was done simultaneously or in a staged manner. Serial radiographic analysis was performed up to 6 years postoperatively.

Results

During the follow-up period, no implant loss was reported. The mean reduced height of the augmented sinus (RHO) was 0.27±1.08 mm at 36 months, and 0.89±1.39 mm at 72 months postoperatively. Large amounts of graft material (P=0.021) and a long healing period (P=0.035) significantly influenced the amount of RHO. In particular, there was a significant relationship between a healing period longer than 40 months and RHO.

Conclusions

BCP can achieve proper dimensional stability with minimal reduction of the graft height in a 3- to 6-year healing period after maxillary sinus augmentation. The healing period and the amount of graft material influenced the resorption of BCP.

A 2-year prospective case series on volumetric changes, PROMs, and clinical outcomes following sinus floor elevation using deproteinized bovine bone mineral as filling material

BACKGROUND

A sinus floor augmentation may be indicated when a lack of hard tissue impedes implant placement. Although clinically successful, evidence supporting the long-term three-dimensional stability of the grafted volume is scarce. Second, evidence on the patient's acceptance of this type of treatment is limited.

PURPOSE

First is to evaluate the changes in graft volume after lateral wall sinus lifting based on superimposed cone beam computed tomography (CBCT) images and then to assess patient-reported outcome measures (PROMs) and clinical outcomes.

MATERIALS AND METHODS

Partially edentulous patients in need of a sinus lift and fixed reconstruction on at least two neighboring implants were selected for a prospective case series. Lateral wall sinus augmentation was performed using deproteinized bovine bone mineral (DBBM) as the only filling material. Volumetric changes were quantified on the basis of a preoperative CBCT and three postoperative CBCTs (at 2 weeks, 3 months, and 2 years). PROMs and clinical parameters were registered.

RESULTS

Twenty-two patients (7 males, 15 females; mean age 59 years) participated of which three patients dropped out during the follow up. Graft volumes amounted to 1418.26 mm³ at 2 weeks, 1201.21 mm³ at 3 months, and 1130.13 mm³ at 2 years postoperative pointing to a relative graft volume stability of 79.7%. Swelling was the leading symptom during the first week. A peak in visual analogue scale scores was observed for pain, swelling, and hematoma the day of surgery and 1 day postoperation with a statistically significant decline between days 3 and 7. Hemorrhage and nose bleeding occurred in 18.2% and 27.3% of the subjects, respectively. About 95.5% of the subjects would undergo the treatment again. All implants integrated successfully and demonstrated healthy clinical conditions.

CONCLUSION

Lateral wall sinus augmentation using DBBM as the only filling material is a viable treatment concept given limited graft resorption, good patients' tolerance, and clinical outcomes.

Use of Combination of Allografts and Xenografts for Alveolar Ridge Preservation Procedures: A Clinical and Histological Case Series

AIM

To perform a clinical and histomorphometric evaluation of a combination of allograft and xenograft for alveolar ridge preservation (ARP) procedures.

METHODS

Seven consecutive cases in need of nonmolar tooth extraction and posterior implant placement were treated by ARP, using a combination of a cortico-trabecular allograft and a mineralized xenograft. All sites received a minimally traumatic tooth extraction, bone graft, collagen membrane placement, and flap closure as possible. Healing time was 4 months for the majority of cases. After tooth removal and just before implant installation, clinical measurements were taken; after the healing time, bone biopsies were taken.

RESULTS

All sites healed uneventfully. Bone dimensional changes were small; a mid-buccal vertical bone gain of 1.0 mm (SD, 3.2 mm) and a horizontal bone reduction of 1.6 mm (1.6) were recorded. Histomorphometric analysis showed large variability in percentages of new bone (mean 22.3% [17.3], range: 1.8%-35.2%) and a considerable amount of residual bone graft material (mean 33.2% [13.2], range: 5.5%-45.8%).

CONCLUSION

Favorable clinical results were observed after the use of the combined bone graft, although a large variability in tissue proportions was present at 4-month healing time, especially for new mature bone.

Maxillary Sinus Floor Augmentation Using Low-Crystalline Carbonate Apatite Granules With Simultaneous Implant Installation: First-in-Human Clinical Trial

PURPOSE

Carbonate apatite (CO₃Ap), an inorganic component of human bone, can be fabricated in chemically pure form from calcium carbonate block via a dissolution-precipitation reaction. A first-in-human clinical trial was conducted in which low-crystalline CO₃Ap granules were evaluated for safety and efficacy in sinus floor augmentation and simultaneous implant installation.

MATERIALS AND METHODS

Procedures were performed in 8 patients (9 implants) with 2 granule sizes: small (300 to 600 μm) and medium (600 to 1,000 μm). Panoramic radiographic assessment was performed immediately after augmentation, 7 ± 2 months after augmentation, 6 ± 2 months after prosthetic loading, and 12 ± 2 months after prosthetic loading.

RESULTS

Postoperative healing was uniformly uneventful, with no abnormal bleeding, pain, or swelling, and all implants achieved successful osseointegration. The mean residual maxillary molar bone height was 5.2 ± 0.8 mm preoperatively and increased to 14.0 ± 1.9 mm after augmentation. Implants 9.0 to 11.5 mm in length were placed. The post-augmentation height decreased to 12.4 ± 1.3 mm at 7 ± 2 months; after prosthetic loading, it decreased to 11.9 ± 0.8 mm at 6 ± 2 months and 11.7 ± 0.6 mm at 12 ± 2 months. No abnormal bone resorption of the augmented areas was observed, and bone height supporting the implants was maintained. The overall implant survival rate was 100%, with no implant failures or complications during the first year.

CONCLUSIONS

Low-crystalline CO₃Ap granules were useful and safe for sinus floor augmentation and simultaneous implant installation, providing a promising bone substitute for dental implant surgery.

Simultaneous and delayed direct sinus lift versus conventional implants: Retrospective study with 5-years minimum follow-up

Background

To compare the radiological parameters and success of posterior maxillary direct sinus lift with simultaneous or delayed implant placement, or implant placement in native bone, after a minimum follow-up period of 5 years.

Material and Methods

A retrospective cohort study was carried out in a university clinic, selecting patients subjected to implant treatment in the posterior maxilla between the years 2005 and 2011. The patients were divided into three groups: 1) implants placed in native bone; 2) direct sinus lift with simultaneous implant placement; and 3) direct sinus lift with delayed implant placement. Bone crest level, bone loss, vertical bone gain, and implant success and survival after a minimum follow-up period of 5 years after prosthetic loading were analyzed.

Results

A total of 163 patients and 329 implants were included in the study. The mean duration of follow-up was 7.0 ± 1.9 years. Bone loss and implant success and survival were very similar in all three groups, with no significant differences among them. Graft reabsorption was greatest during the first 12 months, though graft stabilization was confirmed after 5 years of follow-up.

Conclusions

Bone loss and percentage success and survival proved very similar for the implants placed in native bone and for sinus lift with simultaneous or delayed implant placement. The height of the graft material decreased mainly in the first 12 months, and continued until stabilization after 5 years, with no significant variations thereafter.

Key words:Sinus lift, pristine bone, native bone, dental implants, marginal bone loss, radiological study, implant survival, implant success.

Sinus Membrane Elevation with Heterologous Cortical Lamina: A Randomized Study of a New Surgical Technique for Maxillary Sinus Floor Augmentation without Bone Graft

Background: The aim of this randomized controlled clinical trial was to compare the efficacy of two different techniques for maxillary sinus augmentation using a lateral window approach: Heterologous cortical lamina without any grafting material versus 100% collagenated granular collagen porcine bone. Methods: Twenty-three healthy patients with not relevant past medical history (14 women and 9 men, non-smokers, mean age 52 years, range 48–65 years) were included. In Group I, the sinus was filled with collagen porcine bone (Geno-os, OsteoBiol, Turin, Italy) and a collagen membrane (Evolution, OsteoBiol, Turin, Italy) was used to close the lateral window of the sinus. In Group II, the sinus was treated with heterologous cortical lamina only (Lamina, OsteoBiol, Turin, Italy). Results: There was a statistically significant difference in the surgical time required to complete the augmentation procedures: 18.3 ± 2.1 min for lamina treated sites versus 12.5 ± 3.1 min for porcine bone treated sites. In Group I, the mean volume of the graft was 3101 ± 321 mm³ in the immediate postoperative examination (5–7 days), while after a six-month healing period it was 2716.7 ± 432 mm³. Conclusion: This study demonstrates that the use of heterologous cortical lamina is a valid technique for the mechanical support of sinus membranes resulting in only bone tissue formation and not mixed with the graft. The graft material was biocompatible and not completely resorbed after six months, although the remains were integrated into the bone.

Association of Smoking Habits and Height of Residual Bone on Implant Survival and Success Rate in Lateral Sinus Lift: A Retrospective Study

The primary aim was to evaluate the association of patient-related factors, biomaterials, and implant characteristics on complications' rate of sinus graft surgery and on implant survival rate in grafted sinus. Secondary aims were to measure bone remodeling around implants and patient satisfaction. A retrospective cohort study was designed. Patients who had computerized tomography (CT) before sinus surgery (T0), orthopantomography after implant surgery (T1) and at follow-up (T2), were included. Specific forms were used to collect clinical data. Radiographic measures were: height of residual bone before sinus surgery measured on CT (T0) and apical and marginal bone levels around implants measured on orthopantomography at T1 and T2. Forty-three lateral sinus lifts were performed. Three grafts failed before implant insertion. Out of 83 implants inserted in 29 patients, a total of 19 failed. Mean follow-up (T2) was 6 ± 1.8 years [4; 11.2 years]. The multilevel models analysis showed no association between complications rate and patient-related factors, biomaterials, and implant characteristics. Smoking (odds ratio [OR]: 8.3; 95% CI 1.46-48.05, P = .0173) and height of residual bone (OR: 0.32 for each mm; 95% CI 0.15-0.68, P = .0034) were associated with implant failure. Bone remodeling between T1 and T2 was -0.8 ± 0.2 mm for apical bone and -0.6 ± 0.3 mm for marginal bone. General therapy satisfaction measured in a visual analogue scale was 8.4 ±1.4. In conclusion, lower height of residual bone before sinus surgery and smoking habits had a negative prognostic effect on survival rate of dental implants placed in grafted sinuses.

A radiographic evaluation of graft height changes after maxillary sinus augmentation

Purpose

The aims of the present study were to quantitatively assess graft height changes after sinus lift procedures and to analyze the factors that influenced graft height changes, including the residual bone height before surgery, surgical approach, and tooth type.

Methods

A total of 39 maxillary posterior implants placed during a simultaneous sinus lift procedure were evaluated. Panoramic radiographs of all patients were taken immediately after implant installation and at 3 months, 6 months, 1 year, 2 years, and 3 years. To analyze graft height changes over time, we measured the distance between the implant platform and the base of the grafted sinus floor at 3 locations. The radiographs were analyzed by a single examiner.

Results

Graft height tended to decrease over time, and a statistically significant difference was observed at 2 years compared to baseline (P<0.05). There was no statistically significant difference in graft height change according to the surgical approach or tooth type. For residual bone height, a statistically significant difference in graft height change was found between those with 4–7 mm of residual bone height and those with ≥7 mm (P<0.05).

Conclusions

Graft height after sinus lift procedures significantly decreased at 2 years compared to baseline after sinus augmentation. Further studies should be done with controlled variables, and prospective studies with 3-dimensional images are needed to clarify the factors that influence graft height changes.

Sinus floor elevation procedures to enable implant placement and integration: techniques, biological aspects and clinical outcomes

Implant treatment in an atrophied edentulous posterior maxilla constitutes a challenge for the therapeutic team. The authors of the present study acknowledge that modern micro-rough surface implants in lengths of about 8-10 mm or longer and of different brands are similarly successful. Consequently, the authors propose that the use of different sinus floor elevation techniques should be considered when < 8 mm of bone is available below the maxillary sinus. The type of sinus floor elevation technique selected is mainly based on residual vertical bone height, marginal bone width, local intrasinus anatomy and the number of teeth to be replaced, although other factors (such as surgical training and surgical experience) may have an impact. It is proposed that a transcrestal sinus floor elevation approach can be considered as a first-choice method for single tooth gaps in situations with sufficient width for implant placement and a residual bone height of 5-8 mm, while lateral sinus floor elevation, with or without grafting materials, is indicated when < 5 mm of bone is available and when several teeth are to be replaced. With regard to time of implant placement, a one-stage procedure is preferred provided that high primary stability can be ensured.

Maxillary sinus lift using osteoinductive simvastatin combined with β-TCP versus β-TCP - a comparative pilot study to evaluate simvastatin enhanced and accelerated bone formation

PURPOSE

The aim of this study was to evaluate available bone quality and quantity after performing sinus augmentation using simvastatin/β-TCP combination versus β-TCP alone.

MATERIALS AND METHODS

This study included eight sinus lift procedures conducted on six patients. The sinuses were divided into two equal groups. The patients were recalled one, two weeks two, five, nine months post-operatively for post-operative evaluation. Radiographic evaluation involved cone beam computed tomography (CBCT) radiographs taken for every patient one week and nine months post-operatively to evaluate the changes in bone height, while histomorphometric evaluation involved transcortical bone biopsies taken after nine months during the second-stage surgery for implant placement.

RESULTS

The histomorphometric results showed that the amount of newly formed bone was higher in the simvastatin group when compared to the β-TCP group nine months after the surgery; the difference between the two groups was statistically significant. On the other hand, the radiographic evaluation showed that the rate of resorption of the simvastatin group was found to be higher than the control group; however, the difference between both groups was statistically insignificant.

CONCLUSION

These results showed that Simvastatin is safe to be used in sinus lift with promising osteoinductive capacity, yet further studies using larger sample size is needed.

A prospective controlled trial comparing xenograft/autogenous bone and collagen-stabilized xenograft for maxillary sinus augmentation-Complications, patient-reported outcomes and volumetric analysis

OBJECTIVE

Compare maxillary sinus augmentation (MSA) using two different materials-anorganic bovine bone mineral (ABBM) + autogenous bone (AB) (control group) vs. collagen-stabilized ABBM (test group) in terms of complications, patient-reported outcome measures (PROMs) and volumetric analysis.

MATERIALS AND METHODS

Sixty patients underwent sinus augmentation (30 control + 30 test group). Intra- and postoperative complications were recorded. PROMs measured the impact of grafting on daily activities, pain and morbidity. CT scans were used to measure graft volume, ridge height, material selection and degree of contact of graft-to-surrounding sinus walls. Dental implant placement parameters were also recorded.

RESULTS

All complications were minor and did not prevent completion of the augmentation or subsequent implant placement. Schneiderian membrane perforation was the most frequently encountered complication. Both treatment groups reported moderate limitation in the 1st 48 hr post-surgery but little or none by day 3 or 4. Jaw opening, chewing and bruising were significantly higher in the control group. The impact on work and social life was moderate initially but reduced to little or none by the 2nd day. Mild to moderate pain and interference to daily activities were reported for the first 3 days requiring the use of NSAIDs only. A mean graft volume of 1.46 cm³ (±0.77) was calculated in the control group and 1.27 cm³ (±0.65) in the test group. Extent of contact between graft and surrounding sinus walls had a significant impact on bone volume. Shorter (8 mm) implants were utilized more frequently in the test group, which was also more likely to require additional vertical augmentation, but this was not statistically significant.

CONCLUSION

MSA using a lateral wall approach is safe and associated with mild to moderate pain and restrictions to daily activities for 48-72 hr. Patients' reports of morbidity were greater with autogenous bone harvesting. Collagen-stabilized ABBM provides comparable bone volume to AB + ABBM that is sufficient for placement of implants of adequate size with no need for further vertical augmentation. Engaging the surrounding sinus walls had a significant positive impact on graft volume.

A description of the sequence of long-term behavior of autogenous boneblock in maxillary sinus augmentation in sheep: Additional morphologic and histomorphometric evidence

OBJECTIVE

To document the behavior of autogenous bone block in sinus lift and surgical consequences.

STUDY DESIGN

Twelve sinus lifts with autogenous hip bone blocks and simultaneous insertion of two implants in 6 adult female sheep. Polychrome sequential labelling and histologic and histomorphometric evaluation after 6, 16, and 26 weeks.

RESULTS

Augmentation material in the apical third was almost fully resorbed after 26 weeks (P = .00388). Percentage of bone tissue increased 0.5-1.0 mm from the implant in crestal region (15.3 ± 7.5% to 16.2 ± 10.1%), whereas it vanished in the apical region from 16 to 26 weeks (4.2 ± 10.4% to 0%) (P = .363).

CONCLUSIONS

Autogenous bone block leaves an apical thin but functionally crucial layer covering implants in a form follows function way. Denial of animal-originated biomaterials and prion diseases remain a rarely discussed issue. The use of an implant length-adapted autogenous transplant with osseoinductive advantages should be taken into consideration.