The Role of Oral Processing in Dynamic Sensory Perception

A review of assessment methods for measuring individual differences in oral somatosensory perception

While taste and smell perception have been thoroughly investigated, our understanding of oral somatosensory perception remains limited. Further, assessing and measuring individual differences in oral somatosensory perception pose notable challenges. This review aimed to evaluate the existing methods to assess oral somatosensory perception by examining and comparing the strengths and limitations of each method. The review highlighted the lack of standardized assessment methods and the various procedures within each method. Tactile sensitivity can be assessed using several methods, but each method measures different tactile dimensions. Further investigations are needed to confirm its correlation with texture sensitivity. In addition, measuring a single textural attribute may not provide an overall representation of texture sensitivity. Thermal sensitivity can be evaluated using thermal-change detection or temperature discrimination tests. The chemesthetic sensitivity tests involve either localized or whole-mouth stimulation tests. The choice of an appropriate method for assessing oral somatosensory sensitivity depends on several factors, including the specific research objectives and the target population. Each method has its unique intended purpose, strengths, and limitations, so no universally superior approach exists. To overcome some of the limitations associated with certain methods, the review offers alternative or complementary approaches that could be considered. Researchers can enhance the comprehensive assessment of oral somatosensory sensitivity by carefully selecting and potentially combining methods. In addition, a standardized protocol remains necessary for each method.

Oral processing behavior and dental caries; an insight into a new relationship

INTRODUCTION

Previous evidence suggests an individual variation in the preferred oral processing behavior. Individuals can be classified as firm processing(FPL) or soft processing likers(SPL). FPL(crunchers and chewers) prefer using their teeth while SPL(smooshers and suckers) prefer using the tongue and the palate when processing different food items. Variation in the preferred oral processing behavior has been associated with differences in food texture preference and eating time. Time is one of the factors directly related to the development of dental caries(tooth decay). Oral retention and eating times are associated with greater caries experience. This study aims to explore if a relationship exists between the preferred oral processing behavior and the individual's caries experience.

MATERIALS AND METHODS

This was a cross-sectional, dental center-based study conducted at Jordan University of Science and Technology. Five hundred participants consented to fill out the preferred oral processing behavior(POPB) questionnaire. Anthropometric measurements (including weight, height, and waist circumference) were recorded. A single trained and calibrated dentist registered each participant's caries experience and plaque levels using the DMFS index and plaque index of Silness and Loe.

RESULTS

A total of 351(70.2%) and 149(29.8%) participants were typed as FPL and SPL, respectively. SPL demonstrated higher levels of dental caries experience compared to FPL. The mean DMFS score for SPL was 28.8(±25.43) while for FPL was 18.71(± 18.34). This difference remained significant after adjustment for confounders(P<0.001). SPL exhibited a significantly higher mean score for the "M" component(P <0.001) while no significant difference in the mean score of the "D"(P = 0.076) and "F"(P = 0.272) components was observed when compared to FPL.

CONCLUSION

The current findings provide new insight into a possible relationship between the preferred oral processing behavior and an individual's caries experience. A relationship in which the preferred oral processing behavior can potentially affect and/or be affected by the dental caries experience.

Photobiomodulation minimizes taste changes during hematopoietic cell transplantation: A randomized clinical trial

Prevention and treatment protocols for taste changes observed during hematopoietic cell transplantation (HCT) are not well-established. The purpose of this study was to assess the efficacy of photobiomodulation (PBM) in relieving taste changes and preventing lingual papillae atrophy. HCT patients received PBM (n = 42) on the tongue dorsum using an InGaAIP laser (660 nm, 100 mW, 1.1 W/cm2, 8.8 J/cm2). During the HCT conditioning (T0), severe neutropenia (T1), and after neutrophil engraftment (T2), taste acuity for sweet, bitter, sour, and salty solutions, and clinical appearance of lingual papillae were compared with those of a placebo group (n = 43). PBM significantly reduced hypogeusia, ageusia, and parageusia at T1 and T2, and also successfully prevented papillae atrophy during all the analyzed HCT periods. In conclusion, PBM enhanced taste acuity during HCT. The decrease in papillae atrophy indicated a potential regenerative effect of this therapy on tongue mucosa.

A Pharmacological perspective on the temporal properties of sweeteners

Several non-caloric sweeteners exhibit a delay in sweetness onset and a sweetness linger after sampling. These temporal properties are thought to be the result of non-specific interactions with cell membranes and proteins in the oral cavity. Data and analysis presented in this report also support the potential involvement of receptor affinity and binding kinetics to this phenomenon. In general, affected sweeteners exhibit distinctly higher binding affinity compared to carbohydrate sweeteners, which do not have temporal issues. In addition, binding kinetic simulations illustrate much slower receptor binding association and dissociation kinetics for a set of non-caloric sweeteners presenting temporal issues, in comparison to carbohydrate sweeteners. So, the higher affinity of some non-caloric sweeteners, dictating lower use levels, and affecting binding kinetics, could contribute to their delay and linger in sweetness perception. Simple pharmacology principles could explain, at least in part, some of the temporal issues of sweeteners.

Correlations of sensations of hardness and springiness of agar and gelatin gels with mechanical properties in human participants

OBJECTIVES

It is unclear which mechanical properties of foods cause the texture sensation in humans. This study aimed to investigate the relationship between unilateral compression measurements and the sensations of hardness and springiness in gels.

METHODS

Three different concentrations of agar and gelatin gels were prepared by the addition of agar (1%, 2%, and 3%) and gelatin (4%, 8%, and 16%) to water or apple juice. In a stress-rupture test, stress-strain curves were obtained by the application of uniaxial compression with a disc plunger at a compression rate of 10 mm/s. The hardness, springiness, and palatability of the gels were evaluated by 12 healthy volunteers using a visual analog scale.

RESULTS

The sensation of hardness was positively correlated with the sensation of springiness for the agar and gelatin gels. Palatability decreased as hardness increased for both gels. In terms of mechanical properties, the sensation of hardness was only significantly correlated with the initial elastic modulus, while the sensation of springiness was correlated with the late elastic modulus and other mechanical properties such as fracture strain, time, and stress.

CONCLUSIONS

These results suggest that sensations of hardness and springiness are produced in the initial and late stages, respectively, during the food-crushing process using the tongue, palate, and teeth.

Sensory and affective response to chocolate differing in cocoa content: A TDS and facial electromyography approach

Existing research has offered insight into facial activities and their associations with hedonic liking during the consumption of basic food samples and suggests facial changes during consumption are linked to the hedonic evaluation of tastes and, thus related to the taster's perception rather than the tastes themselves. This study tests whether, during the consumption of commercially available dark chocolate, a complex food product, which can be high in bitterness but expectedly so, how facial activities are linked to the bitterness levels and the hedonic liking of the samples. To do this we carried out two studies with untrained consumers, the first of which captured temporally dynamic sensory perception during the consumption of dark chocolate samples of 36% and 85% cocoa content, using the Temporal Dominance of Sensations (TDS) approach. The second study captured facial EMG over the corrugator and zygomaticus muscles during the consumption of dark chocolate samples (36%, 70%, and 85% cocoa). Specifically, the aim of this research was to investigate whether corrugator activity had a greater association with bitterness perception, linked to cocoa, or hedonic evaluation. Capturing the dynamic sensory profile of chocolate samples allowed an investigation into the time points most evident of sensory variation related to the bitterness and sweetness of the taste, allowing insight into whether facial activities also deviated during this time. These data offer evidence to suggest that corrugator was associated with hedonic evaluation during consumption of the samples, with the most liked samples (being those with 70% and 36% cocoa) eliciting similar corrugator activities and less activity than the least liked 85% cocoa content sample; however, there was also evidence to suggest a significant variation in participants' corrugator activity during the period of oral processing when bitterness was most evident in the 85% cocoa sample and sweetness was most evident in the 36% cocoa sample (i.e., the time when bitterness and sweetness were most divergent) Further investigation showed a variation in facial activities elicited during consumption of the 36% cocoa sample based on whether individuals were part of the group who favoured the 85% cocoa sample or the group favouring the 36% cocoa sample. The findings, therefore, suggest facial EMG, specifically over the corrugator, appears to be related to the hedonic evaluation of a complex food product and not the taste itself. Furthermore, being aware of the time points where sensory variations are most apparent between samples can allow for targeted investigation into facial EMG and its ability to distinguish food samples.

Developing a novel method to measure texture changes of semi-solid food during a continuous compressive motion with high deformation using repeatable dual extrusion cell (RDEC)

Mechanical changes during mastication are difficult to evaluate without using a novel method because the size of the sample is continuously and randomly reduced. The repeatable dual extrusion cell (RDEC) has been developed to measure the breakdown characteristics of a semi-solid food (i.e., minced pork gel) from initial solid states to a small particle size during repeated high deformation compressive motions. The force-time curve of RDEC was recorded, followed by a calculation of work values for each cycle and fitted by Peleg's model. The decrease of k₁ (1.7-1.19) and k₂ (1.56-1.42) values in Peleg's model with an increase of moisture content (56.5-62.5 %) indicated the easily deformable characteristics of soft food. During RDEC measurement, as long as the characteristic length of the sample was larger than the diameter of RDEC probe hole (>4.5 mm), the initial sample size showed no significant influence (p < 0.05) on the measurements. RDEC demonstrated similar ratios of particulate size with human subjects up till 20 cycles of processing. The equilibrium force value from RDEC and SEM images demonstrate that the connective tissue in pork gel mainly contributed to the end-product texture properties after continuous mastication. This study provided an application of the novel RDEC device to estimate the texture and structural changes of minced pork gel under a continuous high deformation compressive motion.

Comparing consumer liking of beef from three feeding systems using a combination of traditional and temporal liking sensory methods

Research on the effects of animal diet on consumer liking of beef has yielded conflicting results. Currently it is unknown whether dynamic changes occur in liking during consumption of beef. This study applied a combination of traditional and temporal (free and structured) liking methods to determine consumer liking of beef derived from animals that were fed grain (GF), grass silage plus grain (SG) or grazed grass (GG) during finishing. Three separate panels of beef eating consumers (n = 51; n = 52; n = 50) were recruited from Teagasc Food Research Centre, Dublin, Ireland to assess striploin steaks from animals fed either GF, SG, or GG. Using the free temporal liking (TL) method, results revealed that beef from GF animals was liked significantly less (p ≤ 0.05) in terms of overall liking, tenderness and juiciness, when compared to steaks from the SG and GG animals. These effects were not observed using the structured TL or traditional liking methods. Further analysis showed the evolution of scores over time was significant (p ≤ 0.05) for all attributes using the free TL method. Overall, the free TL method yielded more discriminative data and was perceived as easier to perform by consumers compared to the structured TL method. These results show that the free TL method may provide an opportunity to elicit more in-depth information regarding consumer sensory response to meat.

Transparent, Ultra-Stretching, Tough, Adhesive Carboxyethyl Chitin/Polyacrylamide Hydrogel Toward High-Performance Soft Electronics

To date, hydrogels have gained increasing attentions as a flexible conductive material in fabricating soft electronics. However, it remains a big challenge to integrate multiple functions into one gel that can be used widely under various conditions. Herein, a kind of multifunctional hydrogel with a combination of desirable characteristics, including remarkable transparency, high conductivity, ultra-stretchability, toughness, good fatigue resistance, and strong adhesive ability is presented, which was facilely fabricated through multiple noncovalent crosslinking strategy. The resultant versatile sensors are able to detect both weak and large deformations, which owns a low detection limit of 0.1% strain, high stretchability up to 1586%, ultrahigh sensitivity with a gauge factor up to 18.54, as well as wide pressure sensing range (0-600 kPa). Meanwhile, the fabrication of conductive hydrogel-based sensors is demonstrated for various soft electronic devices, including a flexible human-machine interactive system, the soft tactile switch, an integrated electronic skin for unprecedented nonplanar visualized pressure sensing, and the stretchable triboelectric nanogenerators with excellent biomechanical energy harvesting ability. This work opens up a simple route for multifunctional hydrogel and promises the practical application of soft and self-powered wearable electronics in various complex scenes.

Strategies to improve meat-like properties of meat analogs meeting consumers' expectations

Due to environmental and ethical concerns, meat analogs represent an emerging trend to replace traditional animal meat. However, meat analogs lacking specific sensory properties (flavor, texture, color) would directly affect consumers' acceptance and purchasing behavior. In this review, we discussed the typical sensory characteristics of animal meat products from texture, flavor, color aspects, and sensory perception during oral processing. The related strategies were detailed to improve meat-like sensory properties for meat analogs. However, the upscaling productions of meat analogs still face many challenges (e.g.: sensory stability of plant-based meat, 3D scaffolds in cultured meat, etc.). Producing safe, low cost and sustainable meat analogs would be a hot topic in food science in the next decades. To realize these promising outcomes, reliable robust devices with automatic processing should also be considered. This review aims at providing the latest progress to improve the sensory properties of meat analogs and meet consumers' requirements.

Multi-attribute temporal descriptive methods in sensory analysis applied in food science: Protocol for a scoping review

BACKGROUND

Sensory perception is a temporal phenomenon highly present in food evaluation. Over the last decades, several sensory analysis methods have been developed to determine how our processing of the stimuli changes during tasting. These methods differ in several parameters: how attributes are characterized (intensity, dominance or applicability), the number of attributes evaluated, the moment of sample characterization (simultaneously with the tasting in continuous or discrete time, retrospectively), the required panel (trained subjects or consumers), etc. At the moment, there is no systematic review encompassing the full scope of this topic. This article presents the protocol for conducting a scoping review on multi-attribute temporal descriptive methods in sensory analysis in food science.

METHODS

The protocol was developed according to the Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) extension for Scoping Reviews checklist. The research question was "how have multi-attribute temporal descriptive methods been implemented, used and compared in sensory analysis?". The eligibility criteria were defined using the PICOS (Population, Intervention, Comparator, Outcome, Study design) framework. This protocol details how the articles of the final review will be retrieved, selected and analyzed. The search will be based on the querying of two academic research databases (Scopus and Web of Science). The main topics reported in research involving sensory analyses methods will be identified and summarized in a data extraction form. This form (detailed in the protocol) will be used to report pertinent information regarding the objectives of the review. It could also be reused as a guideline for carrying out and reporting results of future research in a more standardized way. A quality appraisal process was derived from literature. It will be applied on the included articles of the review, and could also be re-used to ensure that future publications meet higher quality levels. Finally, for the sake of transparency, the limitations of the protocol are discussed.

Determining the relationship between food texture and dental condition: First bite and chewing aspects

Among the sensory properties of foods, texture perception is a complex modality due to catastrophic changes during eating. Relating dental conditions and capacity of texture sensation are still paucities in the literature. Different dental areas emphasize the difference in texture sensation. Anterior teeth are responsible for biting, ripping or tearing; while posterior teeth are chewing and grinding. Hence, the absence of any is expected to cause disruptions in mastication functions. The hypothesis of the present study was dental loss or missing is a burden for hardness perception for first-bite and twice chewed for anterior and posterior teeth, respectively. Patient groups were divided according to anterior-posterior tooth deficiencies and hardness sensation was assessed at first bite and twice chewed modal food (white cheese) with various hardness levels obtained with different fat content. The modal food was tested for its physicochemical, textural and sensory properties with dental assessment. Findings suggest that first-bite hardness judgements were not affected by the loss of the anterior. Oppositely, twice chewed hardness has a significant effect on the loss of a posterior tooth. These findings can indicate to future researchers to be tested according to their dental status especially if chewing is necessary for their sensory tests.

Improvement of chewing and swallowing risks in community-dwelling older adults using texture-modified food

BACKGROUND/OBJECTIVES

SUBJECTS/METHODS

RESULTS

CONCLUSIONS

Dynamic characteristics of sweetness and bitterness and their correlation with chemical structures for six steviol glycosides

Time-intensity (TI) dynamic sensory characterization was used to evaluate the temporal sweet and bitter perception of six commonly available steviol glycosides (Rubusoside, Stevioside, Rebaudioside C, Rebaudioside A, Rebaudioside D and Rebaudioside M). All parameters extracted from TI curves significantly varied among the six samples for both sweetness and bitterness. Compared to other compounds, Rebaudioside M and Rebaudioside D had faster onset of sweetness, quicker decay of aftertaste, and were nearly devoid of bitterness. Conversely, Rubusoside and Stevioside demonstrated an immediate distinct bitter taste and lingering aftertaste. Based on these results, a further investigation into the relationship between temporal properties and chemical structures was conducted. It was found that fewer glucosyl groups on C-19 would result in shorter time for initial stimulation and longer perception of bitterness, whereas more glucosyl groups on C-13 could trigger a faster increase and stronger intensity of sweetness. A shorter time to the peak for sweetness was obtained when the ratio of the number of glucosyl groups on C-13 to that on C-19 was lower, although there was no such effect on bitter taste. These relationships were explained by the adsorption and desorption of these compounds on the taste receptors. Higher numbers and larger sizes of substitutions at the C-19 position of steviol glycosides can increase their desorption percentages and lead to a quicker decay of sweetness. Meanwhile, compounds with fewer glucosyl groups, such as Rubusoside and Stevioside, presented lower desorption and thus longer bitter aftertaste. Overall, the addition of glucosyl groups would generate stronger sweetness and less bitterness if the substituent number on C-13 was closer to that on C-19. These findings conveyed insights into how to modify steviol glycosides to enhance their quality as sweeteners.

A secret of salivary secretions: Multimodal effect of saliva in sensory perception of food

Saliva plays multifunctional roles in oral cavity. Even though its importance for the maintenance of oral health has long been established, the role of saliva in food perception has attracted increasing attention in recent years. We encourage researchers to discover the peculiarity of this biological fluid and aim to combine the data concerning all aspects of the saliva influence on the sensory perception of food. This review presents saliva as a unique material, which modulates food perception due to constant presence of saliva in the mouth and thanks to its composition. Therefore, we highlight the salivary components that contribute to these effects. Moreover, this review is an attempt to structure the effects of saliva on perception of different food categories, where the mechanisms of salivary impact in perception of liquid, semi-solid, and solid foods are revealed. Finally, we emphasize that the large inter-individual variability in salivary composition and secretion appear to contribute to the fact that everyone experiences food in their own way. Therefore, the design of the sensory studies should consider the properties of volunteers' saliva and also carefully monitor the experimental conditions that affect salivary composition and flow rate.

Brow and Masticatory Muscle Activity Senses Subjective Hedonic Experiences during Food Consumption

Sensing subjective hedonic or emotional experiences during eating using physiological activity is practically and theoretically important. A recent psychophysiological study has reported that facial electromyography (EMG) measured from the corrugator supercilii muscles was negatively associated with hedonic ratings, including liking, wanting, and valence, during the consumption of solid foods. However, the study protocol prevented participants from natural mastication (crushing of food between the teeth) during physiological data acquisition, which could hide associations between hedonic experiences and masticatory muscle activity during natural eating. We investigated this issue by assessing participants’ subjective ratings (liking, wanting, valence, and arousal) and recording physiological measures, including EMG of the corrugator supercilii, zygomatic major, masseter, and suprahyoid muscles while they consumed gel-type solid foods (water-based gellan gum jellies) of diverse flavors. Ratings of liking, wanting, and valence were negatively correlated with corrugator supercilii EMG and positively correlated with masseter and suprahyoid EMG. These findings imply that subjective hedonic experiences during food consumption can be sensed using EMG signals from the brow and masticatory muscles.

Predicting thickness perception of liquid food products from their non-Newtonian rheology

The "mouthfeel" of food products is a key factor in our perception of food quality and in our appreciation of food products. Extensive research has been performed on what determines mouthfeel, and how it can be linked to laboratory measurements and eventually predicted. This was mainly done on the basis of simple models that do not accurately take the rheology of the food products into account. Here, we show that the subjectively perceived "thickness" of liquid foods, or the force needed to make the sample flow or deform in the mouth, can be directly related to their non-Newtonian rheology. Measuring the shear-thinning rheology and modeling the squeeze flow between the tongue and the palate in the oral cavity allows to predict how a panel perceives soup "thickness". This is done for various liquid bouillons with viscosities ranging from that of water to low-viscous soups and for high-viscous xanthan gum solutions. Our findings show that our tongues, just like our eyes and ears, are logarithmic measuring instruments in agreement with the Weber-Fechner law that predicts a logarithmic relation between stimulus amplitude and perceived strength. Our results pave the way for more accurate prediction of mouthfeel characteristics of liquid food products.

Food Oral Processing-An Industry Perspective

We illustrate how scientific understanding of Food Oral Processing enables food product development with specific benefits for several target populations. in vivo, in vitro, and in silico approaches are discussed in the context of their ability to quantify oral processing from the molecular to the macroscopic scale. Based on this understanding, food structures with enhanced performance in terms of hedonic and nutritional properties as well as appropriateness for age and certain medical conditions can be developed. We also discuss current gaps and highlight development opportunities from an industry perspective.

Brain-derived neurotrophic factor is related to stress and chewing in saliva and salivary glands

Chewing is one of the most important orofacial functions. During this process, food is reduced in size, while saliva moistens the food and binds it into a bolus that can be easily swallowed. Characteristics of the oral system, including the number of teeth, bite force, and salivary flow, influence the masticatory process. In addition, salivary glands produce several cell growth factors and play an important role in human health. The nerve growth factor (NGF) family consists of NGF, brain-derived neurotrophic factor (BDNF), and neurotrophins-3 to 7. BDNF is a well-studied neurotrophin involved in the neurogenesis, differentiation, and maintenance of select peripheral and central neuronal cell populations during development and adulthood. However, there has been no detailed description of the expression of neurotrophins other than NGF in the salivary gland. We previously studied the effect of immobilization stress + chewing on BDNF secretion and its receptor, tyrosine receptor kinase B, in rat submandibular glands and found increased BDNF expression in duct cells under these conditions. In this review, we describe recent advances in understanding the role of stress and chewing-related BDNF in the saliva and salivary glands.

Sucking versus swallowing coordination, integration, and performance in preterm and term infants

Mammalian infants must be able to integrate the acquisition, transport, and swallowing of food to effectively feed. Understanding how these processes are coordinated is critical, as they have differences in neural control and sensitivity to perturbation. Despite this, most studies of infant feeding focus on isolated processes, resulting in a limited understanding of the role of sensorimotor integration in the different processes involved in infant feeding. This is especially problematic in the context of preterm infants, as they are considered to have pathophysiological brain development and often experience feeding difficulties. Here, we use an animal model to study how the different properties of food acquisition, transport, and swallowing differ between term and preterm infants longitudinally through infancy to understand which processes are sensitive to variation in the bolus being swallowed. We found that term infants are better able to acquire milk than preterm infants, and that properties of acquisition are strongly correlated with the size of the bolus being swallowed. In contrast, behaviors occurring during the pharyngeal swallow, such as hyoid and soft palate movements, show little to no correlation with bolus size. These results highlight the pathophysiological nature of the preterm brain and also demonstrate that behaviors occurring during oral transport are much more likely to respond to sensory intervention than those occurring during the "pharyngeal phase."NEW & NOTEWORTHY Physiological maturation of infant feeding is clinically and developmentally significant, but seldom examined as an integrated function. Using longitudinal high-speed videofluoroscopic data, we found that properties of sucking, such as the length of the suck, are more sensitive to swallow physiology than those associated with the pharyngeal swallow itself, such as hyoid excursion. Prematurity impacted the function and maturation of the feeding system, resulting in a physiology that fundamentally differs from term infants by weaning.

Sensory Nudges: The Influences of Environmental Contexts on Consumers' Sensory Perception, Emotional Responses, and Behaviors toward Foods and Beverages

Food products with highly acceptable flavors are not always successful in the marketplace. Sales of identical food products sold in two different stores often differ. Patrons’ choices of specific menu items vary depending on menu designs at restaurants. Such examples suggest that consumer behavior related to eating, preparing, or purchasing foods and beverages is typically complex, dynamic, and sensitive. There is a growing body of evidence that environmental cues surrounding foods and beverages can modulate consumer perception and behavior in the context of eating and drinking. In light of increasing interest in environmental cues, this Special Issue was designed to introduce recent research that highlights how sensory cues derived from environmental cues can modulate consumer perceptions, emotional responses, and behavior related to foods and beverages. The eleven articles addressed in this Special Issue provide informative and insightful findings that may be applied to a wide range of food-related sites, including grocery stores, retail markets, restaurants, dining facilities, and public dining areas. The findings from these articles also suggest that product developers, sensory professionals, retailers, marketers, and business owners should consider not only sensory aspects of food products, but also sensory cues derived from surrounding contexts to better understand consumer perception, acceptability, and behavior toward their food products.

Liking of food textures and its relationship with oral physiological parameters and mouth-behavior groups

Researchers have categorized people into four "mouth-behavior" groups based on their oral processing preferences, and claimed that members of those mouth-behavior groups differ in their food texture preferences. If people could be classified into groups based on their liking of different textures, food products could be targeted to specific subgroups, potentially enhancing consumer acceptability. In the first part of our study, we grouped people based on their liking ratings of a wide variety of food textures by asking 288 participants to rate their liking of 106 food texture attributes in an online survey. In the second part of our study, we further examined relationships among individuals' food texture liking ratings, mouth-behavior group membership, and measurements of four oral physiological parameters (saliva flow rate, chewing efficiency, biting force, and particle size sensitivity). One-hundred participants completed the online survey on food texture liking, classified themselves into one of four mouth-behavior groups (Chewers, Crunchers, Smooshers, and Suckers), and were measured for four oral physiological parameters. We refuted the idea that large texture-liking subgroups exist. Although our participants self-categorized themselves into the four mouth-behavior groups similarly to previous researchers, our texture liking measurements did not support the presumed preferences of those mouth-behavior groups. Clustering of participants on their oral physiological measurements produced a "low particle-size sensitivity" cluster, a "high biting force" cluster, a "high saliva flow rate" cluster, and a "low saliva flow and low chewing efficiency" cluster. Neither our texture liking nor our oral physiological measurements predicted membership in the four mouth-behavior groups.

Highly Stretchable, Elastic, and Sensitive MXene-Based Hydrogel for Flexible Strain and Pressure Sensors

Electronic skin is driving the next generation of cutting-edge wearable electronic products due to its good wearability and high accuracy of information acquisition. However, it remains a challenge to fulfill the requirements on detecting full-range human activities with existing flexible strain sensors. Herein, highly stretchable, sensitive, and multifunctional flexible strain sensors based on MXene- (Ti₃C₂T _x -) composited poly(vinyl alcohol)/polyvinyl pyrrolidone double-network hydrogels were prepared. The uniformly distributed hydrophilic MXene nanosheets formed a three-dimensional conductive network throughout the hydrogel, endowing the flexible sensor with high sensitivity. The strong interaction between the double-network hydrogel matrix and MXene greatly improved the mechanical properties of the hydrogels. The resulting nanocomposited hydrogels featured great tensile performance (2400%), toughness, and resilience. Particularly, the as-prepared flexible pressure sensor revealed ultrahigh sensitivity (10.75 kPa^-1) with a wide response range (0-61.5 kPa), fast response (33.5 ms), and low limit of detection (0.87 Pa). Moreover, the hydrogel-based flexible sensors, with high sensitivity and durability, could be employed to monitor full-range human motions and assembled into some aligned devices for subtle pressure detection, providing enormous potential in facial expression and phonation recognition, handwriting verification, healthy diagnosis, and wearable electronics.

Morphological and masticatory performance variation of mouth behavior groups

Food texture preference and product acceptance are hypothesized to be influenced by mouth behavior. Recent work identified four mouth behavior (MB) groups that describe most consumers in the United States: Chewers, Crunchers, Smooshers, and Suckers. While these behavioral preferences are thought to play a significant role in food selection and purchasing decisions, it is unknown how closely they relate to body and oral cavity measures as well as masticatory apparatus performance. Our objectives were twofold: to determine whether MB groups are related to (a) morphological variation in body, head, and oral cavity size and (b) masticatory apparatus performance (i.e., maximum jaw gape, maximum bite forces at the incisors and first molar). Measurements were collected following an online MB assessment (JBMB Mouth Behavior Typing Tool) where participants self-identified as one of the four types of consumers. As expected, univariate associations were observed between masticatory performance and overall body as well as oral cavity size. These relationships did not persist when assessed with multivariate methods. MB groups did not differ by body, head, or oral cavity measurements; maximum gape; or maximum bite force. Because of small sample sizes for Smooshers and Suckers-a reflection of their limited prevalence in the U.S. population-we interpret the results for these groups with caution. We can more confidently conclude based on our sample that Chewers and Crunchers do not differ in size, bite force, or maximum gape, suggesting other factors primarily drive food texture choice and preference in these individuals.

Sensory product characterisations based on check-all-that-apply questions: Further insights on how the static (CATA) and dynamic (TCATA) approaches perform

Check-all-that-apply (CATA) questions have become one of the most popular methods for sensory characterisation with consumers. Temporal CATA (TCATA) is an extension of the former that takes into account the dynamic nature of sensory perception. The aim of the present work was to expand the methodological comparison of CATA and TCATA questions, considering the characterisation of solid products that undergo substantial oral processing when consumed. Five studies involving a total of 731 consumers were conducted with different product categories: dried apricots, peas, cheese, bread and milk chocolate. A between-subjects experimental design was used to compare the static and dynamic versions of CATA questions. For comparison purposes, TCATA data were analysed as CATA by collapsing the data into four fixed time intervals (quarters). The four quarters of TCATA were compared to results from CATA considering the frequency of use of the terms, sample discrimination, and product configurations. The temporal aspect of TCATA did not largely modify the average citation proportion of terms or the maximum citation proportion for individual terms. Significant differences among samples were established for most of the terms in both CATA and TCATA evaluations, albeit some subtle differences between the two methods were found. These differences were dependent on the product category and the specific sensory characteristics that were relevant for describing the focal samples. The largest differences were found for Study 5 (milk chocolate), for which TCATA identified a few additional insights on the evolution of similarities and differences among samples. However, in most cases general findings were virtually identical for both methodological approaches. In light of these results, the extra effort of using a dynamic sensory characterisation method compared to a static one, may, in many instances, not be warranted.

Texture Modification Technologies and Their Opportunities for the Production of Dysphagia Foods: A Review

Dysphagia or swallowing difficulty is a common morbidity experienced by those who have suffered a stroke or those undergone such treatments as head and neck surgeries. Dysphagic patients require special foods that are easier to swallow. Various technologies, including high-pressure processing, high-hydrodynamic pressure processing, pulsed electric field treatment, plasma processing, ultrasound-assisted processing, and irradiation have been applied to modify food texture to make it more suitable for such patients. This review surveys the applications of these technologies for food texture modification of products made of meat, rice, starch, and carbohydrates, as well as fruits and vegetables. The review also attempts to categorize, via the use of such key characteristics as hardness and viscosity, texture-modified foods into various dysphagia diet levels. Current and future trends of dysphagia food production, including the use of three-dimensional food printing to reduce the design and fabrication time, to enhance the sensory characteristics, as well as to create visually attractive foods, are also mentioned.

Consumer textural food perception over time based on Mouth Behavior

Food texture assessment is difficult because it is constantly being modified as a food is eaten. While texture has generally been statically assessed, methods aimed at measurement over time are becoming more common. However, even when texture is assessed over time, that assessment is based on averages across all individuals. This study shows that individuals with different Mouth Behaviors eat foods differently in an effort to develop a texture that suits their Mouth Behavior. Because of this, their texture assessments differ over the eating experience. Overall liking was driven by whether individuals were able to transform the product texture into one that aligned with their Mouth Behavior and how well they liked the dominant texture attribute.

Enabling the Rational Design of Low-Fat Snack Foods: Insights from In Vitro Oral Processing

Texture perception is conceptualized as an emergent cognitive response to food characteristics that comprise several physical and chemical properties. Contemporary oral processing research focuses on revealing the relationship between the sensory perceptions and food properties, with the goal of enabling rational product design. One major challenge is associated with revealing the complex molecular and biocolloidal interactions underpinning even simple texture percepts. Here, we introduce in vitro oral processing, which considers oral processing in terms of discrete units of operation (first bite, comminution, granulation, bolus formation, and tribology). Within this framework, we systematically investigate the material properties that govern each specific oral processing unit operation without being impacted by the biological complexity of the oral environment. We describe how this framework was used to rationally design a low-fat potato chip with improved sensory properties by investigating the impact from adding back, to a low-fat potato chip, a small amount of oil mixed with the surface-active agent polyglycerol polyricinoleate (PGPR). The relevance of instrumental measures is validated by sensory assessment, whereby panelists ranked the perceived oiliness of three different types of potato chips. The sensory results indicate that perceived oiliness was higher when a low-fat potato chip was supplemented with an additional 0.5% (w/w) topical coating (the coating comprised 15%, w/w, PGPR in oil) compared to the unaltered low-fat potato chip. The perceived difference in oiliness is hypothesized to correspond to the dynamic friction measured in vitro with a saliva-coated substrate in the presence and absence of PGPR. The study illustrates how dividing oral processing into distinct units provides a rational approach to food product design focused on controlling key sensory attributes.

Evaluating chewing function: Expanding the dysphagia field using food oral processing and the IDDSI framework

The dysphagia field is still in relative infancy with a sophisticated knowledge base amassed since the early 1980's. The desire to identify aspiration and prevent life threatening pneumonia has resulted in a focus on the complexities of swallowing liquids. However, humans also ingest saliva, food, and oral medications, with the potential for these substances to incompletely clear the pharynx, be aspirated or block the airway. Safe swallowing of solid food in particular requires adequate chewing function, good oral control, and sufficient higher cortical function. Although screening and assessment for liquid swallowing safety is well established, the same cannot be said for the evaluation of safety to chew and swallow different food textures. While research into liquid swallowing physiology and its clinical application has largely come from the medical and allied health fields, our knowledge of chewing function for food textures comes from food texture research and food sensory science arenas. There is an exciting opportunity to bring the medical and food texture science fields together to expand our knowledge base on human chewing function, with clinical application to people with dysphagia. The development of the IDDSI Framework as an international standardized way of describing and labelling food texture and drink thickness allows the field to move toward management of texture modified food and thick liquids in a coordinated fashion, speaking the same language. This commentary will describe what we know of chewing function and how it is assessed clinically, proposing methods of assessment that utilize the IDDSI Framework.

Hand-Feel Touch Cues and Their Influences on Consumer Perception and Behavior with Respect to Food Products: A Review

There has been a great deal of research investigating intrinsic/extrinsic cues and their influences on consumer perception and purchasing decisions at points of sale, product usage, and consumption. Consumers create expectations toward a food product through sensory information extracted from its surface (intrinsic cues) or packaging (extrinsic cues) at retail stores. Packaging is one of the important extrinsic cues that can modulate consumer perception, liking, and decision making of a product. For example, handling a product packaging during consumption, even just touching the packaging while opening or holding it during consumption, may result in a consumer expectation of the package content. Although hand-feel touch cues are an integral part of the food consumption experience, as can be observed in such an instance, little has been known about their influences on consumer perception, acceptability, and purchase behavior of food products. This review therefore provided a better understanding about hand-feel touch cues and their influences in the context of food and beverage experience with a focus on (1) an overview of touch as a sensory modality, (2) factors influencing hand-feel perception, (3) influences of hand-feel touch cues on the perception of other sensory modalities, and (4) the effects of hand-feel touch cues on emotional responses and purchase behavior.

Influence of Chewing Cycles on Flavor Recognition Time in Healthy Adults

Flavor recognition times were measured in 23 young, healthy participants of both sexes using an electromyography-based system. The participants were instructed to chew a gummy candy, which was randomly selected among six commercially available types, and to press a button immediately on flavor recognition. A total of 107 normally distributed, flavor recognition times were analyzed, with an average time of 7.5 seconds (± 2.34 seconds, standard deviation). No significant differences were found among the six types of candies in terms of recognition time. Analysis of the association between flavor recognition and chewing phase showed that 70 (65%) of the analyzed 107 recognition signals occurred between 0.2 seconds before and 0.4 seconds after the end of jaw closing. Recognition signals occurring during the jaw-opening phase prolonged its duration by an average of 21%, whereas those occurring during the jaw-closing phase did not influence it.