Does the use of microfluidic sperm sorting for the sperm selection improve in vitro fertilization success rates in male factor infertility?

Microfluidic sperm sorting selects a subpopulation of high-quality sperm with a higher potential for fertilization

STUDY QUESTION

Is a microfluidic sperm sorter (MSS) able to select higher quality sperm compared to conventional methods?

SUMMARY ANSWER

The MSS selects sperm with improved parameters, lower DNA fragmentation, and higher fertilizing potential.

WHAT IS KNOWN ALREADY

To date, the few studies that have compared microfluidics sperm selection with conventional methods have used heterogeneous study population and have lacked molecular investigations.

STUDY DESIGN, SIZE, DURATION

The efficiency of a newly designed MSS in isolating high-quality sperm was compared to the density-gradient centrifugation (DGC) and swim-up (SU) methods, using 100 semen samples in two groups, during 2023-2024.

PARTICIPANTS/MATERIALS, SETTING, METHODS

Semen specimens from 50 normozoospermic and 50 non-normozoospermic men were sorted using MSS, DGC, and SU methods to compare parameters related to the quality and fertilizing potential of sperm. The fertilizing potential of sperm was determined by measurement of phospholipase C zeta (PLCζ) and post-acrosomal sheath WW domain-binding protein (PAWP) expression using flow cytometry, and the chromatin dispersion test was used to assess sperm DNA damage.

MAIN RESULTS AND THE ROLE OF CHANCE

In both normozoospermic and non-normozoospermic groups, the MSS-selected sperm with the highest progressive motility, PLCζ positive expression and PLCζ and PAWP fluorescence intensity the lowest non-progressive motility, and minimal DNA fragmentation, compared to sperm selected by DGC and SU methods (P < 0.05).

LIMITATION, REASONS FOR CAUTION

The major limitations of our study were the low yield of sperm in the MSS chips and intentional exclusion of severe male factor infertility to yield a sufficient sperm count for molecular experiments; thus testing with severe oligozoospermic semen and samples with low count and motility is still required. In addition, due to ethical considerations, at present, it was impossible to use the sperm achieved from MSS in the clinic to assess the fertilization rate and further outcomes.

WIDER IMPLICATIONS OF THE FINDINGS

Our research presents new evidence that microfluidic sperm sorting may result in the selection of high-quality sperm from raw semen. This novel technology might be a key to improving clinical outcomes of assisted reproduction in infertile patients.

STUDY FUNDING/COMPETING INTEREST(S)

The study is funded by the Iran University of Medical Sciences and no competing interest exists.

TRIAL REGISTRATION NUMBER

N/A.

Microfluidics: The future of sperm selection in assisted reproduction

BACKGROUND

Obtaining functional sperm cells is the first step to treat infertility. With the ever-increasing trend in male infertility, clinicians require access to effective solutions that are able to single out the most viable spermatozoa, which would max out the chance for a successful pregnancy. The new generation techniques for sperm selection involve microfluidics, which offers laminar flow and low Reynolds number within the platforms can provide unprecedented opportunities for sperm selection. Previous studies showed that microfluidic platforms can provide a novel approach to this challenge and since then researchers across the globe have attacked this problem from multiple angles.

OBJECTIVE

In this review, we seek to provide a much-needed bridge between the technical and medical aspects of microfluidic sperm selection. Here, we provide an up-to-date list on microfluidic sperm selection procedures and its application in assisted reproductive technology laboratories.

SEARCH METHOD

A literature search was performed in Web of Science, PubMed, and Scopus to select papers reporting microfluidic sperm selection using the keywords: microfluidic sperm selection, self-motility, non-motile sperm selection, boundary following, rheotaxis, chemotaxis, and thermotaxis. Papers published before March 31, 2023 were selected.

OUTCOMES

Our results show that most studies have used motility-based properties for sperm selection. However, microfluidic platforms are ripe for making use of other properties such as chemotaxis and especially rheotaxis. We have identified that low throughput is one of the major hurdles to current microfluidic sperm selection chips, which can be solved via parallelization.

CONCLUSION

Future work needs to be performed on numerical simulation of the microfluidics chip prior to fabrication as well as relevant clinical assessment after the selection procedure. This would require a close collaboration and understanding among engineers, biologists, and medical professionals. It is interesting that in spite of two decades of microfluidics sperm selection, numerical simulation and clinical studies are lagging behind. It is expected that microfluidic sperm selection platforms will play a major role in the development of fully integrated start-to-finish assisted reproductive technology systems.

Does microfluidic sperm selection improve clinical pregnancy and miscarriage outcomes in assisted reproductive treatments? A systematic review and meta-analysis

BACKGROUND

The microfluidic sperm selection (MFSS) device has emerged as a promising adjunct in assisted reproduction treatments (ART). It employs mechanisms of biomimicry based on the microanatomy of the female reproductive tract through strategies like chemotaxis and rheotaxis. Numerous studies assert improvements in ART outcomes with the use of MFSS, often attributed to the theoretical reduction in sperm DNA damage compared to other techniques. However, these attributed benefits lack validation through large-scale clinical trials, and there is no significant evidence of enhanced assisted reproductive treatments (ART) outcomes.

OBJECTIVE

To evaluate whether the utilization of MFSS enhances clinical pregnancy results and abortion outcomes in couples undergoing ART compared to standard sperm selection techniques for Intracytoplasmic Sperm Injection (ICSI). We also assessed laboratory outcomes as a supplementary analysis.

SEARCH METHODS

We conducted searches across databases including PubMed, NIH, LILACS, CENTRAL, Crossref, Scopus, and OpenAlex. A total of 1,255 records were identified. From these, 284 duplicate records were eliminated, and an additional 895 records were excluded due to their association with patent applications, diagnostic tests, forensic analyses, or irrelevance to the research focus. Among the initially eligible 76 studies, 63 were excluded, encompassing abstracts, studies lacking adequate control groups, and ongoing clinical trials. Ultimately, 13 studies were selected for inclusion in the ensuing meta-analysis.

RESULTS

Regarding clinical pregnancy, we assessed a total of 868 instances of clinical pregnancies out of 1,646 embryo transfers. Regarding miscarriage, we examined 95 cases of pregnancy loss among the 598 confirmed clinical pregnancies in these studies.

CONCLUSION

The utilization of MFSS demonstrates marginal positive outcomes compared to standard sperm selection techniques, without statistical significance in any of the analyses.

BROADER IMPLICATIONS

This study conducted the first meta-analysis to evaluate clinical pregnancy rates, miscarriage rates, and laboratory results associated with the use of MFSS compared to standard sperm selection techniques. We have also listed potentially eligible studies for future inclusion. It's important to emphasize the need for multicenter studies with standardized parameters to attain a more robust clarification of this issue.

Evolution of the basic semen analysis and processing sperm

PURPOSE OF REVIEW

The sixth edition of the World Health Organization (WHO) laboratory manual for the examination and processing of human semen was recently published with specific step-by-step instructions for semen evaluation and sperm processing. Point-of-care (POC) testing for semen evaluation and microfluidics for sperm processing are rapidly evolving technologies that could impact how we evaluate and process sperm. Understanding the updated manual in the context of these novel technologies is important.

RECENT FINDINGS

Proper standardization of semen evaluation and sperm processing will allow for consistent high-quality results among laboratories worldwide. POC testing could improve access to semen evaluations that generate referrals to male infertility specialists for further assessment. Microfluidics can select functional sperm with decreased DNA fragmentation in semen and testicular biopsy samples for assisted reproductive technology (ART). Clinical outcomes, such as pregnancy rates and live birth rates, have not been shown to be consistently improved with these technologies compared to conventional techniques, although high level evidence research in this area is limited.

SUMMARY

POC testing and microfluidics have the potential to be combined with machine learning technologies to improve fertility care. If these technologies are appropriately optimized, they could change how we evaluate and process sperm, and potentially lead to improved ART outcomes.

Evaluation Of The Clinical Results Of Using Microfluidic Channel System For Sperm Selection In IVF Cycles In Patients With Low Sperm Concentration

Objective: Microfluidic channel system (MAC), a new generation method, gives the chance to select better quality spermatozoa with lower DNA fragmentation indices. This study evaluated the treatment results in patients who underwent ICSI-ET due to the MAC technique's male factors. Methods: Sakarya University ART Center carried out this retrospective study. Patients with 35 male factor indications were included in our study. In these patients, swim-up (SU) was used in the first of two consecutive IVF cycles, and the MAC sperm preparation technique was used in the second. Our study compared fertilization, quality embryo counts, implantation after fresh embryo transfer, pregnancy rates, fifth-day embryo, and frozen embryo numbers. Results: Fertilization rate was higher in the MAC group than in the SU group (P=0.009). The number of 3rd and 5th Day Grade 1 embryo in the MAC group was statistically higher than in the SU group (p=0.000 for both parameters). The number of quality embryos frozen on day 5 was higher in the MAC group than in the SU group (P=0.000). Conclusions: It is thought that MAC application does not make a statistically significant contribution on implantation and pregnancy in IVF cycles performed due to the malefactor. However, it may positively affect fertilization rate and embryo quality. In addition, we think that it increases the number of embryos frozen at the end of the cycle, and for this reason, the MAC technique may provide positive benefits to IVF treatments.

Microfluidic devices employing chemo- and thermotaxis for sperm selection can improve sperm parameters and function in patients with high DNA fragmentation

Conventional sperm processing uses centrifugation has a negative effect on sperm parameters and DNA integrity. We designed and fabricated a novel microfluid device based on chemotaxis and thermotaxis, and compared it with the swim-up method. Twenty normal samples with high DNA fragmentation were included. Each sample was divided into four groups: Group 1, control, Group 2: sperm selection by thermotaxis, Group 3: sperm selection by chemotaxis, and Group 4: sperm selection with thermotaxis and chemotaxis. We used cumulus cells in a microfluid device to create chemotaxis, and, two warm stages to form a temperature gradient for thermotaxis. The spermatozoa were assessed based on the concentration, motility, and fine morphology using Motile Sperm Organelle Morphology Examination, mitochondrial membrane potential (MMP), acrosome reaction (AR), and sperm DNA fragmentation. Concentration (22.40 ± 5.39 vs. 66.50 ± 19.21; p < 0.001) and DNA fragmentation (12.30 ± 3.96% vs. 17.95 ± 2.89%; p < 0.001) after selection in the chemotaxis and thermotaxis microfluid device were significantly lower than control group. The progressive motility (93.75 ± 4.39% vs. 75.55 ± 5.86%, p < 0.001), normal morphology (15.45 ± 2.50% vs. 10.35 ± 3.36, p < 0.001), MMP (97.65 ± 1.81% vs. 94 ± 3.89%, p = 0.02), and AR status (79.20 ± 5.28% vs. 31.20 ± 5.24%, p < 0.001) in the chemotaxis and thermotaxis microfluid device were significantly increased compared to control group. According to these findings, spermatozoa that have penetrated the cumulus oophorus have better morphology and motility, as well as acrosome reactivity and DNA integrity.

Advanced Sperm Selection Strategies as a Treatment for Infertile Couples: A Systematic Review

Assisted reproductive technology (ART) is an essential tool to overcome infertility, and is a worldwide disease that affects millions of couples at reproductive age. Sperm selection is a crucial step in ART treatment, as it ensures the use of the highest quality sperm for fertilization, thus increasing the chances of a positive outcome. In recent years, advanced sperm selection strategies for ART have been developed with the aim of mimicking the physiological sperm selection that occurs in the female genital tract. This systematic review sought to evaluate whether advanced sperm selection techniques could improve ART outcomes and sperm quality/functionality parameters compared to traditional sperm selection methods (swim-up or density gradients) in infertile couples. According to preferred reporting items for systematic reviews and meta-analyses (PRISMA guidelines), the inclusion and exclusion criteria were defined in a PICOS (population, intervention, comparator, outcome, study) table. A systematic search of the available literature published in MEDLINE-PubMed until December 2021 was subsequently conducted. Although 4237 articles were recorded after an initial search, only 47 studies were finally included. Most reports (30/47; 63.8%) revealed an improvement in ART outcomes after conducting advanced vs. traditional sperm selection methods. Among those that also assessed sperm quality/functionality parameters (12/47), there was a consensus (10/12; 83.3%) about the beneficial effect of advanced sperm selection methods on these variables. In conclusion, the application of advanced sperm selection methods improves ART outcomes. In spite of this, as no differences in the reproductive efficiency between advanced methods has been reported, none can be pointed out as a gold standard to be conducted routinely. Further research addressing whether the efficiency of each method relies on the etiology of infertility is warranted.

Sperm selection techniques in cattle: Microfilter device versus conventional methods

Microfluidics and microfilter devices have been developed to mimic the characteristics of the female reproductive tract, minimizing the risk of sperm damage. This study aimed to compare the use of a microfilter device versus conventional methods for sperm selection used in in vitro fertilization (IVF). For selecting spermatozoa, the pooled samples were processed in a microfilter device, swim-up and mini-Percoll gradient. Kinematic and morphometric parameters, vitality and DNA damage were analysed before and after sperm selection. After selection, 10,000 motile spermatozoa per oocyte were used in IVF drops. Embryos were assessed at three (cleavage rate) and seven (blastocyst rate) days post-IVF. Results of sperm kinematic parameters including average path velocity, velocity straight line, curvilinear velocity, linearity, lateral head displacement with the microfilter device were superior to density gradient (p < 0.05), but similar to swim-up method. Likewise, sperm DNA damage was significantly reduced using the microfilter device and swim-up method. Regarding the total sperm recovery rate post selection, results with the microfilter device (17.64%) and mini-Percoll gradient (18.27%) were higher than with swim-up method (6.52%). However, the cleavage and blastocyst rates were the lowest using the microfilter device. In conclusion, sperm selection using the microfilter device and swim-up method can improve kinematic parameters, although the mini Percoll gradient was the most efficient method for embryo production.

Rationale and study design of a double-blinded prospective randomized clinical trial comparing euploidy rates among embryos created from sibling oocytes injected with sperm processed by microfluidics or by density gradient centrifugation

BACKGROUND

During the in vitro fertilization (IVF) process, sperm must be processed prior to insemination. While the most common method, density gradient centrifugation, can potentially damage sperm during centrifugation, a recent advancement in sperm processing uses a microfluidics system which selects for the most highly motile sperm. In selecting for these sperm which may be of higher quality, the euploidy rates of embryos created as a result may also be improved. The primary aim of this study is to compare the euploidy rates per mature oocyte between embryos created from sibling oocytes injected with sperm processed by microfluidics sorting or by density gradient centrifugation.

METHODS

This is a double-blinded prospective randomized sibling oocyte study including patients undergoing treatment with IVF with intracytoplasmic sperm injection (ICSI) and preimplantation genetic testing (PGT). After controlled ovarian hyperstimulation, oocytes from each patient will be separated into two groups. Each group will be randomized to sperm processed using either microfluidics or density gradient centrifugation and embryos biopsied for PGT to assess euploidy rates. A sample size of 686 oocytes in each group for a total of 1372 oocytes will provide 80% power to detect a significant difference in the euploidy rates per mature oocyte between the two groups. An ancillary study examining the relationship between sperm processing method and sperm DNA fragmentation will be assessed.

CONCLUSION

This study will offer insight into the sperm's contribution to embryo euploidy, and has the potential to provide an alternative method of improving euploidy rates in clinical practice.

Oviduct-mimicking microfluidic chips decreased the ROS concentration in the in vitro fertilized embryos of CD-1 mice

BACKGROUND

The process of the assisted reproductive technology (ART) cycle is extremely complicated, and various factors in each step may influence the final clinical outcomes; thus, optimizing culture conditions for embryos is crucial in the ART cycle, particularly when the traditional petri-dish method remains unchanged for decades. In the current study, we intend to culture embryos in a dynamic environment on chips to optimize the embryo culture conditions.

METHODS

Multilayer soft lithography technology was utilized to establish a microfluidics-based oviduct. Mouse primary oviduct epithelial cells were identified by immunofluorescence staining and then loaded into the chip to coculture with the embryos. The development potential parameters of embryos on chips with cells, on chips without cells, and in drops were compared, as well as reactive oxygen species (ROS) in embryos.

RESULTS

There were no obvious differences regarding the fertilization rate, 4-Cell embryo rate, cleavage rate, high-quality embryo rate, or blastocyst formation rate. However, the intracellular ROS levels in 4-Cell stage embryos on chips with cells were statistically significantly lower than those in drops (P < 0.001). This organ-on-chip device allowed the probability of mammalian embryo culture in a microfluidic-based manner.

CONCLUSIONS

Our findings demonstrated that this novel oviduct-on-chip model may optimize embryo culture conditions by reducing intracellular ROS levels, which may be a competent alternative to the existing stable embryo culture system.

Microfluidic chips as a method for sperm selection improve fertilization rate in couples with fertilization failure

PURPOSE

Sperm quality plays a vital role in successful fertilization and pregnancy. Patients with fertilization failure (total failure or low-fertilization rate) despite having normal semen parameters are a challenging group whose sperm cannot fertilize the oocyte via the intracytoplasmic sperm injection (ICSI) technique. Microfluidics is offered as a new method for proper sperm sorting.

METHODS

This study aimed to evaluate sperm parameters, DNA fragmentation index (DFI), expression of phospholipase C zeta 1 (PLCZ1), and transition nuclear proteins 1 (TNP1) mRNAs in sperm selected by microfluidic sperm sorting (MSS) chip compared with conventional density gradient centrifugation technique in patients with fertilization failure following ICSI. Subsequence fertilization rate and embryo quality were assayed.

RESULTS

Normal morphology and total motility were significantly higher, and DFI was significantly lower in sperm selected by the MSS chip in fertilization failure and control groups. The RT-PCR results demonstrated a significant increase in the expression of PLCZ1 and TNP1 genes in sperm of both groups selected by MSS chips compared to the DGC method. In addition, with the selected sperm by MSS chip, an increase in fertilization rate and improvement of embryo quality was obtained.

CONCLUSION

The present study findings show that sperm sorting by the microfluidic method improves fertilization rate in patients with poor fertilization outcomes following ICSI.

Effect of Sperm Selection by Magnetic-Activated Cell Sorting in D-IUI: A Randomized Control Trial

Clinical outcome in assisted reproduction techniques (ARTs) is mainly influenced by the quality of gametes used. It is known that a high percentage of sperm DNA fragmentation (DNAf) decreases the success of ART clinical results. Therefore, techniques such as magnetic-activated cell sorting (MACS) help to improve results in cases of patients with a high percentage of DNAf. Cryopreservation of sperm in donor intrauterine insemination (D-IUI) treatments increases sperm DNAf, so patients using these sperm samples can benefit from using this technique. This prospective randomized national multicenter study analyzed clinical outcomes of 181 D-IUI treatments. MACS was performed after density gradient centrifugation (DGC) in 90 thawed semen donor samples (MACSG), whereas only DGC was performed in 91 thawed semen donor samples (CG). To our knowledge, this is the first study analyzing the effect of MACS on D-IUI cycles. Our results show no significant differences in gestation, live birth, or miscarriage rates between the two groups. We believe that further studies with a larger sample size are needed to evaluate the application of MACS in combination with standard IUI donor sperm preparations in fertility clinics.

Prospective randomized controlled study of a microfluidic chip technology for sperm selection in male infertility patients

The purpose of this study is to evaluate the impact of a microfluidic approach for spermatozoon selection in male infertility patients undergoing intracytoplasmic sperm injection (ICSI). This research enrolled 128 individuals who had ICSI for male-factor infertility. The patients were separated into two groups according to the method used to pick the spermatozoa: group I (n = 64), which used traditional swim-up procedures, and group II (n = 64), which used the Fertile Chip for spermatozoon selection during ICSI therapy. Fertilization rates and embryo quality were the major outcomes. The rates of pregnancy, clinical pregnancy and live birth were used as secondary outcomes. As a result, there was no statistically significant difference between the two groups in terms of fertilization rate, total grade 1 and 2 embryos. Implantation rate was significantly higher in the Fertile Chip group than in the control group (50% vs. 31%, p = 0.02). The Fertile Chip group had considerably greater pregnancy rates, clinical pregnancy rates (CPR) and live birth rates than the control group (62.5% vs. 45.3%, p = 0.038; 59.4% vs. 35.9%, p = 0.006 and 46.8% vs. 25%, p = 0.009). Fertile Chip had no effect on fertilization rates or embryo quality in male-factor infertility couples. However, the Fertile Chip group had a statistically higher pregnancy rate, CPR and live birth rate.

Sperm Selection and Embryo Development: A Comparison of the Density Gradient Centrifugation and Microfluidic Chip Sperm Preparation Methods in Patients with Astheno-Teratozoospermia

In recent years, microfluidic chip-based sperm sorting has emerged as an alternative tool to centrifugation-based conventional techniques for in vitro fertilization. This prospective study aims to compare the effects of density gradient centrifugation and microfluidic chip sperm preparation methods on embryo development in patient populations with astheno-teratozoospermia. In the study, the semen samples of the patients were divided into two groups for preparation with either the microfluidic or density gradient methods. Selected spermatozoa were then used to fertilize mature sibling oocytes and the semen parameters and embryo development on days 3 and 5 were assessed. While the density gradient group was associated with a higher sperm concentration, motility (progressive and total) was significantly higher in the microfluidic chip group. No significant differences were observed in the fertilization rates or grade 1 (G1) and grade 2 (G2) proportions of the third-day embryos. Furthermore, while the proportions of the poor, fair and good blastocysts on day 5 did not differ significantly, excellent blastocysts (indicating high-quality embryos) were observed in a significantly higher proportion of the microfluidic chip group. When compared to the classical density gradient method, the microfluidic chip sperm preparation yielded sperm with higher motility and higher quality blastocysts at day 5; in patients with astheno-teratozoospermia.

A Review on Microfluidics: An Aid to Assisted Reproductive Technology

Infertility is a state of the male or female reproductive system that is defined as the failure to achieve pregnancy even after 12 or more months of regular unprotected sexual intercourse. Assisted reproductive technology (ART) plays a crucial role in addressing infertility. Various ART are now available for infertile couples. Fertilization in vitro (IVF), intracytoplasmic sperm injection (ICSI) and intrauterine insemination (IUI) are the most common techniques in this regard. Various microfluidic technologies can incorporate various ART procedures such as embryo and gamete (sperm and oocyte) analysis, sorting, manipulation, culture and monitoring. Hence, this review intends to summarize the current knowledge about the application of this approach towards cell biology to enhance ART.