Acutely induced cell mortality in the unicellular green alga Chlamydomonas reinhardtii (Chlorophyceae) following exposure to acrylic resin nanoparticles

In Vitro Efficacy of Isobutyl Cyanoacrylate Nanoparticles against Fish Bacterial Pathogens and Selection Preference by Rainbow Trout (Oncorhynchus mykiss)

The upsurge in havoc being wreaked by antibiotic-resistant bacteria has led to an urgent need for efficacious alternatives to antibiotics. This study assessed the antibacterial efficacy of two isobutyl cyanoacrylate nanoparticles (iBCA-NPs), D6O and NP30, against major bacterial pathogens of fish. In vivo tests on rainbow trout were preceded by in vitro tests of minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). NP30 exhibited higher efficacy than D60, but both iBCA-NPs demonstrated dose-dependent and species-specific in vitro antibacterial properties against the bacterial isolates. Generally, Gram-negative bacteria were more resistant to the iBCA-NPs. Streptococcus iniae, Tenacibaculum maritimum, and Photobacterium damselae were particularly sensitive to both iBCA-NPs. Administered to rainbow trout at 3571.4 mg (iBCA-NP)/kg feed, the iBCA-NPs produced a relative gain rate and survival rates comparable to the control (p > 0.05). The condition factor and the hepatosomatic and viscerosomatic indices of fish were indifferentiable (p > 0.05) between the iBCA-NP groups and the control. The iBCA-NPs caused no alteration in stress, oxidative stress (superoxide dismutase, SOD), plasma complement titer, or lysozyme activity. This study presents the first report of antibacterial activity of iBCA-NPs against Gram-negative bacteria. The results of this study suggest that D60 and NP30 may contribute to reducing the amounts of antibiotics and chemotherapeutic agents used in aquaculture.

A new toxicity mechanism of N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine quinone: Formation of DNA adducts in mammalian cells and aqueous organisms

N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine-quinone (6PPDQ), one of the oxidation products of rubber antioxidant 6PPD, has been identified as a novel toxicant to many organisms. However, an understanding of its underlying toxicity mechanisms remained elusive. In this study, we reported that 6PPDQ could react with deoxyguanosine to form one isomer of 3-hydroxy-1, N²-6PPD-etheno-2'-deoxyguanosine (6PPDQ-dG). Next, by employing an ultra-performance liquid chromatography-electrospray ionization-tandem mass spectrometry (UPLC-ESI-MS/MS) method, we found that 6PPDQ-dG could be detected in genomic DNA from 6PPDQ-treated mammalian cells and Chlamydomonas reinhardtii. We observed positive correlations between concentrations of exogenous 6PPDQ and the amounts of 6PPDQ-dG, and a recovery period after removal of 6PPDQ also led to decreased levels of the adduct in both organisms, which suggested potential repair pathways for this adduct in mammalian cells and unicellular algae. Additionally, we extracted the genomic DNA from tissues of frozen capelin and observed substantial amounts of the adduct in roe and gills, as well as livers at a relatively lower level. These results provided insights into the target organs and tissues that 6PPDQ might accumulate or harm fish. Overall, our study provides a new understanding of the mechanisms of toxicity of 6PPDQ in mammalian cells and aqueous organisms.

Transcriptomic hallmarks of in vitro TiO2 nanotubes toxicity in Chlamydomonas reinhardtii

Recently, more accessible transcriptomic approaches have provided a new and deeper understanding of environmental toxicity. The present study focuses on the transcriptomic profiles of green microalgae Chlamydomonas reinhardtii exposed to new industrially promising material, TiO₂ nanotubes (NTs), as an example of a widely used one-dimensional nanomaterial. The first algal in vitro assay included 2.5 and 7.5 mg/L TiO₂ NTs, resulting in a dose-dependent negative effect on biological endpoints. At a working concentration of 7.5 mg/L, RNA-sequencing showed a mainly negative effect on the cells. In summary, the results indicated metabolic disruption, ^{such as ATP loss, damage to mitochondria and chloroplasts, loss of solutes due to permeated membranes,} and cell wall damage. Moreover, apoptosis-induced transcripts were detected. Interestingly, reactivation of transposons was observed. In signalling and transcription pathways, including chromatin remodelling and locking, the annotated genes were downregulated.

Enhanced triacyclglycerols and starch synthesis in Chlamydomonas stimulated by the engineered biodegradable nanoparticles

Microalgae are promising feedstock for renewable fuels. The accumulation of oils in microalgae can be enhanced by nanoparticle exposure. However, the nanoparticles employed in previous studies are mostly non-biodegradable, which hinders nanoparticles developing as promising approach for biofuel production. We recently reported the engineered resin nanoparticles (iBCA-NPs), which were found to be biodegradable in this study. When the cells of green microalga Chlamydomonas reinhardtii were exposed to the iBCA-NPs for 1 h, the cellular triacyclglycerols (TAG) and starch contents increased by 520% and 60% than that in the control. The TAG production improved by 1.8-fold compared to the control without compromised starch production. Additionally, the content of total fatty acids increased by 1.3-fold than that in control. Furthermore, we found that the iBCA-NPs addition resulted in increased cellular reactive oxygen species (ROS) content and upregulated the activities of antioxidant enzymes. The relative expressions of the key genes involved in TAG and starch biosynthesis were also upregulated. Overall, our results showed that short exposure of the iBCA-NPs dramatically enhances TAG and starch accumulation in Chlamydomonas, which probably resulted from prompt upregulated expression of the key genes in lipid and starch metabolic pathways that were triggered by over-accumulated ROS. This study reported a useful approach to enhance energy-rich reserve accumulation in microalgae. KEY POINTS: 1. The first attempt to increase oil and starch in microalgae by biodegradable NPs. 2. The biodegradability of iBCA-NPs by the BOD test was more than 50% after 28 days. 3. The iBCA-NPs induce more energy reserves than that of previously reported NPs.

Evaluation of the Growth-Inhibitory Spectrum of Three Types of Cyanoacrylate Nanoparticles on Gram-Positive and Gram-Negative Bacteria

The development of novel effective antibacterial agents is crucial due to increasing antibiotic resistance in various bacteria. Poly (alkyl cyanoacrylate) nanoparticles (PACA-NPs) are promising novel antibacterial agents as they have shown antibacterial activity against several Gram-positive and Gram-negative bacteria. However, the antibacterial mechanism remains unclear. Here, we compared the antibacterial efficacy of ethyl cyanoacrylate nanoparticles (ECA-NPs), isobutyl cyanoacrylate NPs (ⁱBCA-NPs), and ethoxyethyl cyanoacrylate NPs (EECA-NPs) using five Gram-positive and five Gram-negative bacteria. Among these resin nanoparticles, ECA-NPs showed the highest growth inhibitory effect against all the examined bacterial species, and this effect was higher against Gram-positive bacteria than Gram-negative. While ⁱBCA-NP could inhibit the cell growth only in two Gram-positive bacteria, i.e., Bacillus subtilis and Staphylococcus aureus, it had negligible inhibitory effect against all five Gram-negative bacteria examined. Irrespective of the differences in growth inhibition induced by these three NPs, N-acetyl-L-cysteine (NAC), a well-known reactive oxygen species (ROS) scavenger, efficiently restored growth in all the bacterial strains to that similar to untreated cells. This strongly suggests that the exposure to NPs generates ROS, which mainly induces cell growth inhibition irrespective of the difference in bacterial species and cyanoacrylate NPs used.

Novel treatment of Microcystis aeruginosa using chitosan-modified nanobubbles

In this study, we treated harmful Microcystis aeruginosa cyanobacteria using chitosan-modified nanobubbles. The chitosan-modified nanobubbles (255 ± 19 nm) presented a positive zeta potential (15.36 ± 1.17 mV) and generated significantly (p < 0.05) more hydroxyl radicals than the negatively charged nanobubbles (-20.68 ± 1.11 mV). Therefore, the interaction between the positively charged chitosan-modified nanobubbles and negatively charged M. aeruginosa (-34.81 ± 1.79 mV) was favored. The chitosan-modified nanobubble treatment (2.20 × 10⁸ particles mL^-1) inactivated 73.16% ± 2.23% of M. aeruginosa (2.00 × 10⁶ cells mL^-1) for 24 h without causing significant cell lysis (≤0.25%) and completely inhibited the acute toxicity of M. aeruginosa toward Daphnia magna. The inactivation was correlated (r² = 0.97) with the formation of reactive oxygen species (ROS) in M. aeruginosa. These findings indicated that the hydroxyl radicals generated by the chitosan-modified nanobubbles disrupted cell membrane integrity and enhanced oxidative stress (ROS formation), thereby inactivating M. aeruginosa. Moreover, the penetration of the chitosan-modified nanobubbles and cell alterations in M. aeruginosa were visually confirmed. Our results suggested that the chitosan-modified nanobubble treatment is an eco-friendly method for controlling harmful algae. However, further studies are required for expanding its practical applications.

Toxicity assessment and underlying mechanisms of multiple metal organic frameworks using the green algae Chlamydomonas reinhardtii model

Metal-organic frameworks (MOFs) are an emerging class of materials which have garnered increasing attention for their utility as adsorbents and photocatalysts in water treatment. Nevertheless, the environmental risks of MOFs, especially their underlying impacts on aquatic organisms, are not fully explored. Herein, the toxicity of multiple representative MOFs was systematically assessed using a freshwater green alga (Chlamydomonas reinhardtii) model. Six typical MOFs with different metal nodes or organic linkers, including four transition metal incorporated aluminum-based porphyrin MOFs [pristine Al-PMOF, Al-PMOF (Cu), Al-PMOF (Ni), and Al-PMOF (Co)], one amine-functionalized MOF NH₂-MIL-125 (Ti), and one bimetallic Hofmann MOF (NiCo-PYZ), were successfully synthesized and characterized. All the tested MOFs significantly reduced the chlorophyll content and inhibited the algal growth, with the most toxic materials being NiCo-PYZ and Al-PMOF (Cu). Distinct toxic mechanisms were observed for the tested MOFs. Metal ion release was the primary cause for algal toxicity induced by NiCo-PYZ. The algal toxicity induced by porphyrin MOFs could be explained by the combined effects of metal ion release and nutrient adsorption, agglomeration and physical interactions, and reactive oxygen species generation. NH₂-MIL-125 (Ti) showed higher stability and more biocompatibility than the other tested MOFs. MOFs concentrations with no harmful effects to algae can be taken as the threshold values for safe use and discharge of MOFs. The ecotoxicological risks of MOFs should be considered as the applied concentrations of MOFs at mg/mL levels in environmental remediation were much higher than the no harmful effect thresholds.

Review of aquatic toxicity of pharmaceuticals and personal care products to algae

Pharmaceuticals and Personal Care Products (PPCPs) have been frequently detected in the environment around the world. Algae play a significant role in aquatic ecosystem, thus the influence on algae may affect the life of higher trophic organisms. This review provides a state-of-the-art overview of current research on the toxicity of PPCPs to algae. Nanoparticles, contained in personal care products, also have been considered as the ingredients of PPCPs. PPCPs could cause unexpected effects on algae and their communities. Chlorophyta and diatoms are more accessible and sensitive to PPCPs. Multiple algal endpoints should be considered to provide a complete evaluation on PPCPs toxicity. The toxicity of organic ingredients in PPCPs could be predicted through quantitative structure-activity relationship model, whereas the toxicity of nanoparticles could be predicted with limitations. Light irradiation can change the toxicity through affecting algae and PPCPs. pH and natural organic matter can affect the toxicity through changing the existence of PPCPs. For joint and tertiary toxicity, experiments could be conducted to reveal the toxic mechanism. For multiple compound mixture toxicity, concentration addition and independent addition models are preferred. However, there has no empirical models to study nanoparticle-contained mixture toxicity. Algae-based remediation is an emerging technology to prevent the release of PPCPs from water treatment plants. Although many individual algal species are identified for removing a few compounds from PPCPs, algal-bacterial photobioreactor is a preferable alternative, with higher chances for industrial applications.