Biodegradation of anthracene by a newly isolated bacterial strain,Bacillus thuringiensisAT.ISM.1, isolated from a fly ash deposition site

Degradation of anthracene and phenanthrene by strain Streptomyces sp. M-1 and its application in the treatment of PAHs-contaminated water

Polycyclic aromatic hydrocarbons (PAHs) are persistent organic pollutants with mutagenicity, carcinogenicity and teratogenicity, widely distributed in the environment. Effective biodegradation of PAHs is highly required, especially in wastewater. An efficient PAHs degrading strain Streptomyces sp. M-1 was isolated from polluted kerosene. The degradation capacity of anthracene and phenanthrene was evaluated under various PAHs concentrations, pH, and temperatures by M-1. To find the degradation pathways, the key intermediates were detected by mass spectrometry and the enzyme-encoding genes were analyzed by many bioinformatics tools. Furthermore, the potential of the strain for bioremediation in PAH-contaminated water was evaluated. The results showed that the maximal degradation rate of anthracene and phenanthrene reached 93.14% (100 mg L-1, 7 days) and 49.25% (50 mg L-1, 7 days), respectively. Their average degradation rate increased within the concentration of 50-800 mg L-1 and reached 2.72 mg d-1 for anthracene and 1.28 mg d-1 for phenanthrene at 800 mg L-1. M-1 exhibited high and stable anthracene degradation rate under tested pH and temperatures, and high phenanthrene degradation under tested pH and higher temperatures. Based on the analysis of both intermediates and enzyme-encoding genes, it is proposed that anthracene undergoes degradation via the phthalic acid pathway, while phenanthrene follows the salicylic acid pathway. Finally, 98.98% degradation of anthracene and 72.77% degradation of phenanthrene in water was realized over 14 days. We thus propose that Streptomyces sp. M-1 is an effective degrader for bioremediation of PAHs pollution.

Green titanium dioxide (TiO2) nanoparticles assisted biodegradation of anthracene employing Serratia quinivorans HP5

The anthracene biodegradation potential of Serratia quinivorans HP5 was studied under a controlled laboratory environment. The green TiO2 nanoparticles (NPs) synthesized from Paenibacillus sp. HD1PAH was used to accelerate the biodegradation process. The synergistic application of TiO2 NPs and S. quinivorans HP5 resulted in a reduction of anthracene concentration by 1.2 folds in liquid-medium and 1.5 folds in contaminated soil. Gas-chromatography and mass-spectrometric investigation showed the production of four anthracene derivatives, namely 1,2-anthracene dihydrodiol, 6,7-benzocoumarin, anthrone, and 9,10-anthraquinoneat the termination of experimental periods. Furthermore, bacterial biomass increased by 23.3 folds in the presence of TiO2 NPs, and overall soil enzyme activities were enhanced by 4.2 folds in the treated samples. In addition, there was a negative correlation observed between the biomass of S. quinivorans HP5 and the concentrations of anthracene, suggesting the involvement of bacterium in anthracene biodegradation processes. The degradation pathway of anthracene revealed its transformation into the less toxic compound 9,10-anthraquinone. Overall, this study elucidates a novel biodegradation pathway for anthracene and highlights the potential of nano-assisted bacterial remediation as a promising approach for environmental cleanup.

Nano-composite rGO-Ag-Cu-Ni mediated photocatalytic degradation of anthracene and benzene

Polycyclic aromatic hydrocarbons (PAHs) are omnipresent, persistent, and carcinogenic pollutants continuously released in the atmosphere due to the rapid increase in population and industrialization worldwide. Hence, there is an ultimate rise in concern about eliminating the toxic PAHs and their related aromatic hydrocarbons from the air, water, and soil environment by employing efficient removal technologies using nanoparticles as a catalyst. Here, the degradation of selective PAHs viz., anthracene and benzene using laboratory synthesized rGO-Ag-Cu-Ni nanocomposite (catalyst) was studied. Characterization studies revealed the nanocomposites exhibited surface plasma resonance at 350 - 450 nm, confirming the presence of Ag, Cu, and Ni metal ions embedded on the reduced graphene substrate. It was found that the nanocomposites synthesized were spherical, amorphous in nature, and aggregated together with measurements ranging from 423 to 477 nm. An SEM-EDX analysis of the nanocomposite demonstrated that it contained 25.13% O, 14.24% Ni, 27.79% Cu, and 32.84% Ag, which confirms the synthesis of the nanocomposite. Crystalline, sharp nanocomposites of average size 17-41 nm with an average diameter of 118.5 nm (X-ray diffraction and DLS) were observed. FTIR spectra showed that the nanocomposites had the functional groups alkanes, alkenes, alkynes, carboxylic acids, and halogen derivatives. Batch adsorption studies revealed that the maximum degradation achieved at optimum nano-composite concentration of 10 μg/mL, pH value of 5, PAHs concentration of 2 μg/mL and effective irradiation source being UV radiations in the case of both benzene and anthracene pollutants. The degradation of benzene and anthracene followed Freundlich & Langmuir isotherm with the highest R2 value of 0.9894 & 0.9885, respectively. Adsorption kinetic studies under optimum conditions revealed that the adsorption of both benzene and anthracene followed Pseudo-second order kinetics. Antimicrobial studies revealed that the synthesized nano-composite exhibited potential antimicrobial activity against Gram positive bacterium (Bacillus subtilis, Staphylococcus aureus), Gram negative bacterium (Klebsiella pneumonia, Escherichia coli) and fungal strain (Aspergillus niger) respectively. Thus, the synthesized rGO-Ag-Cu-Ni nano-composite acts as an effective antimicrobial agent as well as a PAHs degrading agent, helping to overcome antibiotics resistance and to mitigate the overgrowing PAHs pollution in the environment.

Microbiome based approaches for the degradation of polycyclic aromatic hydrocarbons (PAHs): A current perception

Globally, polycyclic aromatic hydrocarbons (PAHs) pollution is primarily driven by their release into the air through various combustion processes, including burning fossil fuels such as coal, oil, and gas in motor vehicles, power plants, and industries, as well as burning organic matter like wood, tobacco, and food in fireplaces, cigarettes, and grills. Apart from anthropogenic pollution sources, PAHs also occur naturally in crude oil, and their potential release during oil extraction, refining processes, and combustion further contributes to contamination and pollution concerns. PAHs are resistant and persistent in the environment because of their inherent features, viz., heterocyclic aromatic ring configurations, hydrophobicity, and thermostability. A wide range of microorganisms have been found to be effective degraders of these recalcitrant contaminants. The presence of hydrocarbons as a result of numerous anthropogenic activities is one of the primary environmental concerns. PAHs are found in soil, water, and the air, making them ubiquitous in nature. The presence of PAHs in the environment creates a problem, as their presence has a detrimental effect on humans and animals. For a variety of life forms, PAH pollutants are reported to be toxic, carcinogenic, mutation-inducing, teratogenic, and immune toxicogenics. Degradation of PAHs via biological activity is an extensively used approach in which diverse microorganisms (fungal, algal, clitellate, and protozoan) and plant species and their derived composites are utilized as biocatalysts and biosurfactants. Some microbes have the ability to transform and degrade these PAHs, allowing them to be removed from the environment. The goal of this review is to provide a critical overview of the existing understanding of PAH biodegradation. It also examines current advances in diverse methodologies for PAH degradation in order to shed light on fundamental challenges and future potential.

New roles for Bacillus thuringiensis in the removal of environmental pollutants

For a long time, the well-known Gram-positive bacterium Bacillus thuringiensis (Bt) has been extensively studied and developed as a biological insecticide for Lepidoptera and Coleoptera pests due to its ability to secrete a large number of specific insecticidal proteins. In recent years, studies have found that Bt strains can also potentially biodegrade residual pollutants in the environment. Many researchers have isolated Bt strains from multiple sites polluted by exogenous compounds and characterized and identified their xenobiotic-degrading potential. Furthermore, its pathway for degradation was also investigated at molecular level, and a number of major genes/enzymes responsible for degradation have been explored. At present, a variety of xenobiotics involved in degradation in Bt have been reported, including inorganic pollutants (used in the field of heavy metal biosorption and recovery and precious metal recovery and regeneration), pesticides (chlorpyrifos, cypermethrin, 2,2-dichloropropionic acid, etc.), organic tin, petroleum and polycyclic aromatic hydrocarbons, reactive dyes (congo red, methyl orange, methyl blue, etc.), and ibuprofen, among others. In this paper, the biodegrading ability of Bt is reviewed according to the categories of related pollutants, so as to emphasize that Bt is a powerful agent for removing environmental pollutants.

Biodegradation of isoproturon by Escherichia coli expressing a Pseudomonas putida catechol 1,2-dioxygenase gene

The phenylurea herbicides are persistent in soil and water, necessitating the creation of methods for removing them from the environment. This study aimed to examine the soil microbial diversity, searching for local bacterial isolates able to efficiently degrade the phenylurea herbicide isoproturon, 3-(4-isopropylphenyl)-1, 1-dimethylurea (IPU). The best isolates able to effectively degrade IPU were selected, characterized, and identified as Pseudomonas putida and Acinetobacter johnsonii. The catechol 1, 2-dioxygenase enzyme's catA gene was amplified, cloned, and expressed in E. coli M15. The Expressed E. coli showed high degradation efficiency (44.80%) as analyzed by HPLC after 15 days of inoculation in comparison to P. putida (21.60%). The expression of the catA gene in P. putida and expressed E. coli was measured using quantitative polymerase chain reaction (qPCR). The results displayed a significant increase in the mRNA levels of the catA gene by increasing the incubation time with IPU. Hydrophilic interaction chromatography (HILIC) mass spectrometry analysis revealed that three intermediate metabolites, 1-(4-isopropylphenyl)-3-methylurea (MDIPU), 4-Isopropylaniline (4-IA) and 1-(4-isopropylphenyl) urea (DDIPU) were generated by both P. putida and expressed E. coli. In addition, IPU-induced catA activity was detected in both P. putida and expressed E. coli. The supernatant of both P. putida and expressed E. coli had a significant influence on weed growth. The study clearly exhibited that P. putida and expressed E. coli were capable of metabolizing IPU influentially and thus could be utilized for bioremediation and biodegradation technology development.

Mobile technology features and technostress in mandatory online teaching during the COVID-19 crisis

Technostress is defined as any unhealthy condition caused by dealing with modern technology in various harmful ways; examples of technostress include addiction and stress. Even though technostress has been extensively studied in the literature, little attention has been paid to investigating technostress among academics who work in exceptional circumstances, such as crises, and who might be experiencing different psychological states due to those circumstances. To fill the gap, this study aims to explore the factors influencing technostress among school teachers. The study examined technostress's level and factor graphics structure among 692 academics from different Arab countries during COVID-19. The technostress factors and their stories were explored and measured using sequential mixed methods and confirmatory and exploratory factor analysis. The study discusses various factors' direct and indirect effects on mobile technology integration in education and the theoretical and practical implications of managing technostress in online classes. A model of techno-stressors among Arab academics was found to include: schedule overload, complexity, uncertainty, uselessness, invasion, and compulsion. The direct effect of various factors on mobile technology integration in education is mainly positive, while indirect effects are more varied. The theoretical and practical implications of managing technostress in online classes include: considering the psychological and physiological impact of technostress on students' learning performance, decreasing overall satisfaction with the learning experience, and improving the overall quality of online courses. As a result of this study's findings, a new perspective is provided on how academics in particular circumstances (in this study, the occupation of Palestine) may behave and feel toward technology in teaching.

Anthracene removal potential of green synthesized titanium dioxide nanoparticles (TiO2-NPs) and Alcaligenes faecalis HP8 from contaminated soil

Anthracene biodegradation potential has been studied in liquid culture and soil microcosm environment by employing green synthesized TiO₂ nanoparticles (NPs) and Alcaligenes faecalis HP8. The bacterium was isolated from crude oil contaminated soil, while TiO₂ nanoparticles were synthesized using Paenibacillus sp. HD1PAH and Cyperus brevifolius which have PAHs remediation abilities. The dual application of TiO₂ nanoparticles and Alcaligenes faecalis HP8 decreases anthracene concentration up to 21.3% in liquid at the end of 7 days and 37.9% in the soil treatments after completion of 30 days. Besides, the GC-MS analysis revealed production of five metabolites including 1,2-anthracenedihydrodiol; 6,7-benzocoumarin; 3-hydroxy-2-naphthoic acid; salicylic acid and 9,10-anthraquinone at different time interval of the treatments. Anthracene degradation pathway confirms the breakdown of three ring anthracene to one ring salicylic acid. Additionally, soil dehydrogenase, urease, alkaline phosphatase, catalase and amylase activities increased up to 4.09 folds, 8.6 folds, 4.4 folds, 3.6 folds and 2.1 folds respectively after the combined treatments of TiO₂ nanoparticles and Alcaligenes faecalis HP8. The bacterial biomass and residual anthracene concentration were found to be negatively correlated. Finally, the study brings into light a novel anthracene biodegradation pathway and provides a new dimension in nano assisted bacterial remediation.

Bioengineering for the Microbial Degradation of Petroleum Hydrocarbon Contaminants

Petroleum hydrocarbons are relatively recalcitrant compounds, and as contaminants, they are one of the most serious environmental problems. n-Alkanes are important constituents of petroleum hydrocarbons. Advances in synthetic biology and metabolic engineering strategies have made n-alkane biodegradation more designable and maneuverable for solving environmental pollution problems. In the microbial degradation of n-alkanes, more and more degradation pathways, related genes, microbes, and alkane hydroxylases have been discovered, which provide a theoretical basis for the further construction of degrading strains and microbial communities. In this review, the current advances in the microbial degradation of n-alkanes under aerobic condition are summarized in four aspects, including the biodegradation pathways and related genes, alkane hydroxylases, engineered microbial chassis, and microbial community. Especially, the microbial communities of “Alkane-degrader and Alkane-degrader” and “Alkane-degrader and Helper” provide new ideas for the degradation of petroleum hydrocarbons. Surfactant producers and nitrogen providers as a “Helper” are discussed in depth. This review will be helpful to further achieve bioremediation of oil-polluted environments rapidly.

Benzo[A]Pyrene Biodegradation by Multiple and Individual Mesophilic Bacteria under Axenic Conditions and in Soil Samples

To date, only a handful of bacterial strains that can independently degrade and utilize benzo[a]pyrene (BaP) as the sole carbon source has been isolated and characterized. Here, three new bacterial strains-JBZ1A, JBZ2B, and JBZ5E-were isolated from contaminated soil and, using 16S rRNA sequencing, were identified as Brad rhizobium japonicum, Micrococcus luteus, and Bacillus cereus, respectively. The growth ability of each individual strain and a consortium of all strains in the presence of BaP (4-400 µmol·L^-1, pH 7, 37 °C) was identified by the doubling time (dt). The results illustrate that dt decreased with increasing BaP concentrations for individual strains and the consortium. The optimum growth conditions of the consortium were 37 °C, 0.5% NaCl (w/v), and pH 7. Under these conditions, the degradation rate was 1.06 µmol·L^-1·day^-1, whereas that of individual strains ranged from 0.9 to 0.38 µmol·L^-1·day^-1. B. cereus had the strongest contribution to the consortium's activity, with a degradation rate of 0.9 µmol·L^-1·day^-1. The consortium could also remove BaP spiked with soil but at a lower rate (0.01 µmol L^-1.day^-1). High-performance liquid chromatography-high-resolution tandem mass spectrometry permitted the detection of the metabolites of these strains, and a biodegradation pathway is proposed.

Potential Toxicity Risk Assessment and Priority Control Strategy for PAHs Metabolism and Transformation Behaviors in the Environment

In this study, 16 PAHs were selected as the priority control pollutants to summarize their environmental metabolism and transformation processes, including photolysis, plant degradation, bacterial degradation, fungal degradation, microalgae degradation, and human metabolic transformation. Meanwhile, a total of 473 PAHs by-products generated during their transformation and degradation in different environmental media were considered. Then, a comprehensive system was established for evaluating the PAHs by-products' neurotoxicity, immunotoxicity, phytotoxicity, developmental toxicity, genotoxicity, carcinogenicity, and endocrine-disrupting effect through molecular docking, molecular dynamics simulation, 3D-QSAR model, TOPKAT method, and VEGA platform. Finally, the potential environmental risk (phytotoxicity) and human health risks (neurotoxicity, immunotoxicity, genotoxicity, carcinogenicity, developmental toxicity, and endocrine-disrupting toxicity) during PAHs metabolism and transformation were comprehensively evaluated. Among the 473 PAH's metabolized and transformed products, all PAHs by-products excluding ACY, CHR, and DahA had higher neurotoxicity, 152 PAHs by-products had higher immunotoxicity, and 222 PAHs by-products had higher phytotoxicity than their precursors during biological metabolism and environmental transformation. Based on the TOPKAT model, 152 PAH by-products possessed potential developmental toxicity, and 138 PAH by-products had higher genotoxicity than their precursors. VEGA predicted that 247 kinds of PAH derivatives had carcinogenic activity, and only the natural transformation products of ACY did not have carcinogenicity. In addition to ACY, 15 PAHs produced 123 endocrine-disrupting substances during metabolism and transformation. Finally, the potential environmental and human health risks of PAHs metabolism and transformation products were evaluated using metabolic and transformation pathway probability and degree of toxic risk as indicators. Accordingly, the priority control strategy for PAHs was constructed based on the risk entropy method by screening the priority control pathways. This paper assesses the potential human health and environmental risks of PAHs in different environmental media with the help of models and toxicological modules for the toxicity prediction of PAHs by-products, and thus designs a risk priority control evaluation system for PAHs.

Uptake, translocation, and metabolism of anthracene in tea plants

The origin of 9, 10-anthraquinone (AQ) contamination in tea remains unclear at present. The objective of this study was to test the hypothesis that AQ could be produced from the precursor anthracene in tea plantations. To test this hypothesis, the uptake, translocation, and transformation of anthracene in tea (Camellia sinensis) seedlings using hydroponic experimentation was investigated. Anthracene concentrations in tea tissues rose with increased anthracene exposure, which in the roots were significantly (p < 0.05) higher than those in aboveground parts at the end of the exposure. These results indicated that anthracene tended to be adsorbed into tea seedling via the roots and accumulated largely within roots. The three main pathways of anthracene degradation in tea seedlings were suggested: oxygen was incorporated in the 9^th and 10^th positions of anthracene resulting in AQ (I) and anthrone (II), and naphthalene was formed by ring fission of anthracene via methylanthracene (III). The principal anthracene metabolites were AQ and anthrone. The concentrations of AQ, like anthrone, were markedly elevated in the roots than those in stems throughout the entire exposure period. Moreover, the translocation factors for anthracene and its primary metabolites AQ and anthrone from roots to stems were persistently lower than 0.1, demonstrating a poor translocation from roots to the aboveground regions. However, tea seedlings could take anthracene up from water and translocate it to the leaves. It was a possible risk for AQ contamination in tea leaves continuously exposed to anthracene for long periods of time because tea plants were perennial crops.

Different metabolic pathways involved in anthracene biodegradation by Brevibacillus, Pseudomonas and Methylocystis Species

Background

Polycyclic aromatic hydrocarbons (PAHs) such as anthracene are one of the most toxic contaminants to our environment. Microbial biodegradation of these xenobiotics is a cost-effective technological solution. The present study aimed to recover some bacterial isolates from Beni-Suef Governorate in Egypt with high capabilities of anthracene biodegradation. The selected isolates were molecularly characterized by 16S rRNA gene sequencing, the degree of anthracene biodegradation was monitored using optical density (OD) and high-performance liquid chromatography (HPLC), PCR amplification of some selected genes encoding biodegradation of PAHs was monitored, and gas chromatography–mass spectrometry (GC–MS) analysis was applied for detecting the resulted metabolites.

Result

Three bacterial isolates were studied, the 16s rRNA sequences of the isolates showed homology of the first isolate to Brevibacillus sp. (94.58 %), the second isolates showed homology to Pseudomonas sp. (94.53%) and the third isolate showed homology to Methylocystis sp. (99.61 %), all isolates showed the ability to degrade anthracene. PCR amplification of some selected genes encoding biodegradation of PAHs revealed the presence of many biodegrading genes in the selected strains. Gas chromatography-mass spectrometry (GC–MS) analysis of the metabolites resulted from anthracene biodegradation in the present study suggested that more than one biodegradation pathway was followed by the selected isolates.

Conclusions

The selected strains could represent a potential bioremediation tool in solving the PAHs problem in the Egyptian environment with a clean and cost-effective technique.

Graphical Abstract

Bioremediation of Polycyclic Aromatic Hydrocarbons from Industry Contaminated Soil Using Indigenous Bacillus spp

Polycyclic aromatic hydrocarbons (PAHs) are reportedly toxic, ubiquitous and organic compounds that can persist in the environment and are released largely due to the incomplete combustion of fossil fuel. There is a range of microorganisms that are capable of degrading low molecular weight PAHs, such as naphthalene; however, fewer were reported to degrade higher molecular weight PAHs. Bacillus spp. has shown to be effective in neutralizing polluted streams containing hydrocarbons. Following the growing regulatory requirement to meet the PAH specification upon disposal of contaminated soil, the following study aimed to identify potential Bacillus strains that could effectively remediate low and high molecular weight PAHs from the soil. Six potential hydrocarbon-degrading strains were formulated into two prototypes and tested for the ability to remove PAHs from industry-contaminated soil. Following the dosing of each respective soil system with prototypes 1 and 2, the samples were analyzed for PAH concentration over 11 weeks against an un-augmented control system. After 11 weeks, the control system indicated the presence of naphthalene (3.11 µg·kg−1), phenanthrene (24.47 µg·kg−1), fluoranthene (17.80 µg·kg−1) and pyrene (28.92 µg·kg−1), which illustrated the recalcitrant nature of aromatic hydrocarbons. The soil system dosed with prototype 2 was capable of completely degrading (100%) naphthalene, phenanthrene and pyrene over the experimental period. However, the accumulation of PAHs, namely phenanthrene, fluoranthene and pyrene, were observed using prototype 1. The results showed that prototype 2, consisting of a combination of Bacillus cereus and Bacillus subtilis strains, was more effective in the biodegradation of PAHs and intermediate products. Furthermore, the bio-augmented system dosed with prototype 2 showed an improvement in the overall degradation (10–50%) of PAHs, naphthalene, phenanthrene and pyrene, over the un-augmented control system. The following study demonstrates the potential of using Bacillus spp. in a bioremediation solution for sites contaminated with PAHs and informs the use of biological additives for large-scale environmental remediation.

An overview of neonicotinoids: biotransformation and biodegradation by microbiological processes

Neonicotinoids are a class of pesticides widely used in different phases of agricultural crops. Similar to other classes of pesticides, they can damage human and environmental health if overused, and can be resistent to degradation. This is especially relevant to insect health, pollination, and aquatic biodiversity. Nevertheless, application of pesticides is still crucial for food production and pest control, and should therefore be carefully monitored by the government to control or reduce neonicotinoid contamination reaching human and animal feed. Aware of this problem, studies have been carried out to reduce or eliminate neonicotinoid contamination from the environment. One example of a green protocol is bioremediation. This review discusses the most recent microbial biodegradation and bioremediation processes for neonicotinoids, which employ isolated microorganisms (bacteria and fungi), consortiums of microorganisms, and different types of soils, biobeds, and biomixtures.

Biofilm development of Bacillus siamensis ATKU1 on pristine short chain low-density polyethylene: A case study on microbe-microplastics interaction

A low-density polyethylene (LDPE) degrading bacterial strain (ATKU1) was isolated (99.86% similar with Bacillus siamensis KCTC 13613^T) from a plastic dumping site to study interactions between microplastics (< 5 mm) and microorganisms. The strain was found (by scanning electron microscopy) to form biofilm on the microplastic surface after its interaction with LDPE (avg. M_w~4,000 Da and avg. M_n~1,700 Da) as a sole carbon source. Atomic force microscopy (AFM) showed the biofilm's 3-D developmental patterns and significantly increased Young's modulus of the LDPE surface after microbial treatment. Most of the viable bacteria attached to biofilms rather than media, which suggested their ability to utilize LDPE. Absorption bands of carbonyl, alkenyl, acyl, ester, primary-secondary alcohol, alkene groups and nitric oxides were found on the treated LDPE particles using Fourier-transform infrared spectroscopy. Fourier transform-ion cyclotron resonance mass spectrometry of the media indicated compositional shifts of the compounds after treatment (i.e., increase in the degree of unsaturation and increment in oxygen-to-carbon ratio) and presence of unsaturated hydrocarbons, polyketides, terpenoids, aliphatic/peptides, dicarboxylic acids, lipid-like compounds were hinted. The plastic degrading abilities of Bacillus siamensis ATKU1 suggest its probable application for large scale plastic bioremediation facility.

Profiling and potential cancer risk assessment on children exposed to PAHs in playground dust/soil: a comparative study on poured rubber surfaced and classical soil playgrounds in Seoul

Children can get affected by polycyclic aromatic hydrocarbons (PAHs) while they interact with play area soil/rubber surfacing and exposed to PAHs by dermal contact, inhalation and hand-to-mouth activity. A comparative study has been conducted on PAHs profiling and probable cancer risk of children from PAHs present in uncovered playground surface soil and poured rubber surfaced playground dust. Surface soil and dust samples have been collected from 14 different children parks around the Korea University campus, Seoul, Republic of Korea. Concentrations of 16 PAHs in the soils/dust were found to be in a range of 2.82-57.93 μg g^-1. Profiling of the PAHs from the playground soils/dust reveals 3-ring PAHs are dominating with 79.9% of total PAHs content, on an average. The diagnostic ratio analysis confirms that vehicular exhaust and fossil fuel burning are likely the main sources of high molecular weight carcinogenic PAHs, whereas low molecular weight PAHs have pyrogenic origin. The probabilistic health risk assessment using Monte Carlo simulations for the estimation of the 95% cancer risk exposed to the PAHs from the surfaced playgrounds shows a little higher value than the USEPA safety standard (1.3 × 10^-5). Sensitivity analysis revealed exposure duration and relative skin adherence factor for soil as the most influential parameters of the assessment. Noticeably, cancer risk is approximately 10 times higher in poured rubber surfaced playgrounds than in uncovered soil playgrounds.

Biofilm development of Bacillus thuringiensis on MWCNT buckypaper: Adsorption-synergic biodegradation of phenanthrene

Adsorption-synergic biodegradation of a model PAH (phenanthrene, Phe) on MWCNT buckypaper surface with a potential PAH biodegrading bacterial strain Bacillus thuringiensis AT.ISM.11 has been studied in aqueous medium. Adsorption of Phe on buckypaper follows Dubinin-Ashtakhov model (R² = 0.9895). MWCNT generally exerts toxicity to microbes but adsorbed layer of Phe prevents the direct contact between MWCNT and bacterial cell wall. FESEM study suggests that formation of biofilms occurred on buckypaper. Lower layer cells are disrupted and flattened as they are in direct contact with MWCNT but the upper layer cells of the developed biofilm are fully intact and functional. Force-distance curves of Bacillus thuringiensis AT.ISM.11 with buckypaper indicates adhesion forces varied from -10.3 to -15.6 nN with increasing contact time, which supports the phenomenon of biofilm formation. AFM surface statistical data of buckypaper suggests increase in bacterial cell count increases the Rms roughness (95.7242-632.565) while adhering to the buckypaper surface to form biofilm. We observed an enhanced Phe biodegradation of 93.81% from that of the 65.71% in 15 days' study period, using buckypaper as a bio-carrier or a matrix for the microbial growth. GC-MS study identified phthalic acid ester as metabolite, which is the evidence of protocatechuate pathway degradation of Phe. Current study enlightens the interaction between hydrocarbons and microbes in presence of MWCNT buckypaper matrix in aqueous system for the first time. An enhancement in biodegradation of Phe by 28.10% has also been reported which can be a basis for CNT aided enhanced biodegradation studies in future.

Health risk assessment and source study of PAHs from roadside soil dust of a heavy mining area in India

The total concentrations of 13 detected polycyclic aromatic hydrocarbons (PAHs) in different traffic soil samples of Dhanbad heavy mining area, India, were between 8.256 and 12.562 µg/g and were dominated by four ring PAHs (44%). Diagnostic ratio study revealed that fossil fuel burning and vehicular pollution are the most prominent sources of the PAHs in roadside soil even at a heavy coal mining area. The 90th percentiles cancer risks determined by probabilistic health risk assessment (Monte Carlo simulations) for both the age groups (children and adults) were above tolerable limit (>1.00E-06) according to USEPA. The simulated mean cancer risk was 1.854E-05 for children and 1.823E-05 for adults. For different exposure pathways, dermal contact was observed to be the major pathway with an exposure load of 74% for children and 85% for adults. Sensitivity analysis demonstrated relative skin adherence factor for soil (AF) is the most influential parameter of the simulation, followed by exposure duration (ED).