Sub-100-nm metafluorophores with digitally tunable optical properties self-assembled from DNA

Force-Encoding DNA Nanomachines for Simultaneous and Direct Detection of Multiple Pathogenic Bacteria in Blood

Pathogen detection is growing in importance in the early stages of bacterial infection and treatment due to the significant morbidity and mortality associated with bloodstream infections. Although various diagnostic approaches for pathogen detection have been proposed, most of them are time-consuming, with insufficient sensitivity and limited specificity and multiplexing capability for clinical use. Here, we report a force-encoding DNA nanomachine for simultaneous and high-throughput detection of multiple pathogens in blood through force-induced remnant magnetization spectroscopy (FIRMS). The force-encoding DNA nanomachines coupled with DNA walkers enable analytical sensitivity down to a single bacterium via a cascade signal amplification strategy. More importantly, it allows for rapid and specific profiling of various pathogens directly in blood samples, without being affected by factors such as light color and solution properties. We expect that this magnetic sensing platform holds great promise for various applications in biomedical research and clinical diagnostics.

Fluorescence intensity coded DNA frameworks based on the FRET effect enable multiplexed miRNA imaging in living cells

miRNA analysis has played an important role in precise diagnosis, treatment and prognosis of cancer, especially multiplexed miRNA imaging. In this work, a novel fluorescence emission intensity (FEI) encoding strategy was developed based on a tetrahedron DNA framework (TDF) carrier and the FRET effect between Cy3 and Cy5. Six FEI-encoded TDF (FEI-TDF) samples were constructed by tuning the labeling number of Cy3 and Cy5 at the vertexes of the TDF. For fluorescence characterization in vitro, distinct FEIs in the spectra and different colors under ultraviolet (UV) irradiation of FEI-TDF samples were observed. By dividing the ranges of FEIs of samples, the stability of FEIs was highly improved. Based on the ranges of FEIs in each sample, five codes with good discrimination were finally developed. Before the application of intracellular imaging, the excellent biocompatibility of the TDF carrier was proved by CCK-8 assay. The barcode probes based on samples 12, 21 and 11 were designed as example models to realize multiplexed imaging of miRNA-16, miRNA-21 and miRNA-10b in MCF-7 cells with obviously different fluorescence merged colors. FEI-TDFs provide a new research perspective for the development of fluorescence multiplexing strategies in the future.

DNA-framework-based multidimensional molecular classifiers for cancer diagnosis

A molecular classification of diseases that accurately reflects clinical behaviour lays the foundation of precision medicine. The development of in silico classifiers coupled with molecular implementation based on DNA reactions marks a key advance in more powerful molecular classification, but it nevertheless remains a challenge to process multiple molecular datatypes. Here we introduce a DNA-encoded molecular classifier that can physically implement the computational classification of multidimensional molecular clinical data. To produce unified electrochemical sensing signals across heterogeneous molecular binding events, we exploit DNA-framework-based programmable atom-like nanoparticles with n valence to develop valence-encoded signal reporters that enable linearity in translating virtually any biomolecular binding events to signal gains. Multidimensional molecular information in computational classification is thus precisely assigned weights for bioanalysis. We demonstrate the implementation of a molecular classifier based on programmable atom-like nanoparticles to perform biomarker panel screening and analyse a panel of six biomarkers across three-dimensional datatypes for a near-deterministic molecular taxonomy of prostate cancer patients.

Controlled Assembly of Fluorophores inside a Nanoliposome

Cellular compartmentalization plays an essential role in organizing the complex and multiple biochemical reactions in the cell. An artificial compartment would provide powerful strategies to develop new biochemical tools for material production and diagnosis, but it is still a great challenge to synthesize the compartments that encapsulate materials of interest while controlling their accurate locations, numbers, and stoichiometry. In this study, we evaluated chemical characteristics of a liposome-encapsulated compartment, which has great potential to locate various materials of interest with precise control of their locations and numbers in the compartment. A nanoliposome was constructed inside a ring-shaped DNA origami skeleton according to the method of Yang et al., and further equipped with a double-stranded DNA platform to assemble molecules of interest in the nanoliposome. Upon formation of the nanoliposome, a pH-sensitive fluorophore on the bridged platform showed little or no response to the pH change of the outer buffer, ensuring that the molecules assembled on the platform are effectively shielded from the outer environment. The ring-shaped DNA skeleton equipped with a double-stranded DNA platform allows spatial assembly of several functional molecules inside the nanoliposome to isolate them from the outer environment.

Multiplexed Detection of Molecular Interactions with DNA Origami Engineered Cells in 3D Collagen Matrices

The interactions of cells with signaling molecules present in their local microenvironment maintain cell proliferation, differentiation, and spatial organization and mediate progression of diseases such as metabolic disorders and cancer. Real-time monitoring of the interactions between cells and their extracellular ligands in a three-dimensional (3D) microenvironment can inform detection and understanding of cell processes and the development of effective therapeutic agents. DNA origami technology allows for the design and fabrication of biocompatible and 3D functional nanodevices via molecular self-assembly for various applications including molecular sensing. Here, we report a robust method to monitor live cell interactions with molecules in their surrounding environment in a 3D tissue model using a microfluidic device. We used a DNA origami cell sensing platform (CSP) to detect two specific nucleic acid sequences on the membrane of B cells and dendritic cells. We further demonstrated real-time detection of biomolecules with the DNA sensing platform on the surface of dendritic cells in a 3D microfluidic tissue model. Our results establish the integration of live cells with membranes engineered with DNA nanodevices into microfluidic chips as a highly capable biosensor approach to investigate subcellular interactions in physiologically relevant 3D environments under controlled biomolecular transport.

Highly Selective FRET-Aided Single-Molecule Counting of MicroRNAs Labeled by Splinted Ligation

MicroRNAs (miRNAs) are short non-coding RNAs that play an important role in regulating gene expression. Since miRNAs are abnormally expressed in various cancers, they are considered to be promising biomarkers for early cancer diagnosis. However, the short length and strong sequence similarity among miRNAs make their reliable quantification very challenging. We developed a highly selective amplification-free miRNA detection method based on Förster resonance energy transfer (FRET)-aided single-molecule counting. miRNAs were selectively labeled with FRET probes using splinted ligation. When imaged with a single-molecule FRET setup, the miRNA molecules were accurately identified by the probe's FRET. miRNA concentrations were estimated from the count of molecules. The high sensitivity of the method in finding sparse molecules enabled us to achieve a limit of detection of 31-56 amol for miR-125b, miR-100, and miR-99a. Single nucleotide mismatch could be discriminated with a very high target-to-mismatch ratio. The method accurately measured the high expression of miR-125b in gastric cancer cells, which agreed well with previous reports. The high sensitivity and accuracy of this technique demonstrated its clinical potential as a robust miRNA detection method.

Biomolecule-Based Optical Metamaterials: Design and Applications

Metamaterials are broadly defined as artificial, electromagnetically homogeneous structures that exhibit unusual physical properties that are not present in nature. They possess extraordinary capabilities to bend electromagnetic waves. Their size, shape and composition can be engineered to modify their characteristics, such as iridescence, color shift, absorbance at different wavelengths, etc., and harness them as biosensors. Metamaterial construction from biological sources such as carbohydrates, proteins and nucleic acids represents a low-cost alternative, rendering high quantities and yields. In addition, the malleability of these biomaterials makes it possible to fabricate an endless number of structured materials such as composited nanoparticles, biofilms, nanofibers, quantum dots, and many others, with very specific, invaluable and tremendously useful optical characteristics. The intrinsic characteristics observed in biomaterials make them suitable for biomedical applications. This review addresses the optical characteristics of metamaterials obtained from the major macromolecules found in nature: carbohydrates, proteins and DNA, highlighting their biosensor field use, and pointing out their physical properties and production paths.

Ultra-photostable DNA FluoroCubes: Mechanism of Photostability and Compatibility with FRET and Dark Quenching

DNA-based FluoroCubes were recently developed as a solution to photobleaching, a ubiquitous limitation of fluorescence microscopy (Niekamp; ; Stuurman; ; Vale Nature Methods, 2020). FluoroCubes, that is, compact ∼4 × 4 × 5.4 nm3 four-helix bundles coupled to ≤6 fluorescent dyes, remain fluorescent up to ∼50× longer than single dyes and emit up to ∼40× as many photons. The current work answers two important questions about the FluoroCubes. First, what is the mechanism by which photostability is enhanced? Second, are FluoroCubes compatible with Förster resonance energy transfer (FRET) and similar techniques? We use single particle photobleaching studies to show that photostability arises through interactions between the fluorophores and the four-helix DNA bundle. Supporting this, we discover that smaller ∼4 × 4 × 2.7 nm3 FluoroCubes also confer ultraphotostability. However, we find that certain dye-dye interactions negatively impact FluoroCube performance. Accordingly, 4-dye FluoroCubes lacking these interactions perform better than 6-dye FluoroCubes. We also demonstrate that FluoroCubes are compatible with FRET and dark quenching applications.

Spatially Patterned Neutralizing Icosahedral DNA Nanocage for Efficient SARS-CoV-2 Blocking

Broad-spectrum anti-SARS-CoV-2 strategies that can inhibit the infection of wild-type and mutant strains would alleviate their threats to global public health. Here, we propose an icosahedral DNA framework for the assembly of up to 30 spatially arranged neutralizing aptamers (IDNA-30) to inhibit viral infection. Each triangular plane of IDNA-30 is composed of three precisely positioned aptamers topologically matching the SARS-CoV-2 spike trimer, thus forming a multivalent spatially patterned binding. Due to its multiple binding sites and moderate size, multifaced IDNA-30 induces aggregation of viruses. The rigid icosahedron framework afforded by four helixes not only forms a steric barrier to prevent the virus from binding to the host but also limits the conformational transformation of the SARS-CoV-2 spike trimer. Combining multivalent topologically patterned aptamers with structurally well-defined nanoformulations, IDNA-30 exhibits excellent broad-spectrum neutralization against SARS-CoV-2, including almost completely blocking the infection of Omicron pseudovirus. Overall, this multidimensional neutralizing strategy provides a new direction for the assembly of neutralizing reagents to enhance their inhibitory effect against SARS-CoV-2 infection and combat other disease-causing viruses.

3D molecular phenotyping of cleared human brain tissues with light-sheet fluorescence microscopy

The combination of optical tissue transparency with immunofluorescence allows the molecular characterization of biological tissues in 3D. However, adult human organs are particularly challenging to become transparent because of the autofluorescence contributions of aged tissues. To meet this challenge, we optimized SHORT (SWITCH-H2O2-antigen Retrieval-TDE), a procedure based on standard histological treatments in combination with a refined clearing procedure to clear and label portions of the human brain. 3D histological characterization with multiple molecules is performed on cleared samples with a combination of multi-colors and multi-rounds labeling. By performing fast 3D imaging of the samples with a custom-made inverted light-sheet fluorescence microscope (LSFM), we reveal fine details of intact human brain slabs at subcellular resolution. Overall, we proposed a scalable and versatile technology that in combination with LSFM allows mapping the cellular and molecular architecture of the human brain, paving the way to reconstruct the entire organ.

Design Features to Accelerate the Higher-Order Assembly of DNA Origami on Membranes

Nanotechnology often exploits DNA origami nanostructures assembled into even larger superstructures up to micrometer sizes with nanometer shape precision. However, large-scale assembly of such structures is very time-consuming. Here, we investigated the efficiency of superstructure assembly on surfaces using indirect cross-linking through low-complexity connector strands binding staple strand extensions, instead of connector strands binding to scaffold loops. Using single-molecule imaging techniques, including fluorescence microscopy and atomic force microscopy, we show that low sequence complexity connector strands allow formation of DNA origami superstructures on lipid membranes, with an order-of-magnitude enhancement in the assembly speed of superstructures. A number of effects, including suppression of DNA hairpin formation, high local effective binding site concentration, and multivalency are proposed to contribute to the acceleration. Thus, the use of low-complexity sequences for DNA origami higher-order assembly offers a very simple but efficient way of improving throughput in DNA origami design.

Quantitative Super-Resolution Microscopy to Assess Adhesion of Neuronal Cells on Single-Layer Graphene Substrates

Single Layer Graphene (SLG) has emerged as a critically important nanomaterial due to its unique optical and electrical properties and has become a potential candidate for biomedical applications, biosensors, and tissue engineering. Due to its intrinsic 2D nature, SLG is an ideal surface for the development of large-area biosensors and, due to its biocompatibility, can be easily exploited as a substrate for cell growth. The cellular response to SLG has been addressed in different studies with high cellular affinity for graphene often detected. Still, little is known about the molecular mechanism that drives/regulates the cellular adhesion and migration on SLG and SLG-coated interfaces with respect to other substrates. Within this scenario, we used quantitative super-resolution microscopy based on single-molecule localization to study the molecular distribution of adhesion proteins at the nanoscale level in cells growing on SLG and glass. In order to reveal the molecular mechanisms underlying the higher affinity of biological samples on SLG, we exploited stochastic optical reconstruction microscopy (STORM) imaging and cluster analysis, quantifying the super-resolution localization of the adhesion protein vinculin in neurons and clearly highlighting substrate-related correlations. Additionally, a comparison with an epithelial cell line (Chinese Hamster Ovary) revealed a cell dependent mechanism of interaction with SLG.

Monochromatic Fluorescent Barcodes Hierarchically Assembled from Modular DNA Origami Nanorods

With the rapid advancement of fluorescence microscopy, there is a growing interest in the multiplexed detection and identification of various bioanalytes (e.g., nucleic acids and proteins) for efficient sample processing and analysis. We introduce in this work a simple and robust method to provide combinations for micrometer-scale fluorescent DNA barcodes of hierarchically assembled DNA origami superstructures for multiplexed molecular probing. In addition to optically resolvable dots, we placed fluorescent loci on adjacent origami within the diffraction limit of each other, rendering them as unresolvable bars of measurable lengths. We created a basic set of barcodes and trained a machine learning algorithm to process and identify individual barcodes from raw images with high accuracy. Moreover, we demonstrated that the number of combinations can be increased exponentially by generating longer barcodes, by controlling the number of incorporated fluorophores to create multiple levels of fluorescence intensity, and by employing super-resolution imaging. To showcase the readiness of the barcodes for applications, we used our barcodes to capture and identify target nucleic acid sequences and for simultaneous multiplexed characterization of binding kinetics of several orthogonal complementary nucleic acids.

Telomerase detection using a DNA-PAINT strategy

Telomerase plays an important role in maintaining the length of telomere during cell division and is recognized as a new kind of biomarkers for cancer diagnosis. In this work, we present a brand new telomerase detection strategy based on a DNA points accumulation for imaging in nanoscale topography (DNA-PAINT) like strategy. With an extraordinary spatial resolution (∼10 nm), the DNA-PAINT based strategy offers several advantages. First, it avoids complicated polymerase chain reaction and electrophoresis procedures. Second, it enables super resolution imaging of the reaction products with a high signal-to-noise ratio and facilitates the location of telomeric elongation sites on the single particle level, which results in a high sensitivity. Third, the detection scheme of the DNA-PAINT strategy allows directin situvisualization of the telomeric elongation process, which has never been achieved before. All these advantages make the DNA-PAINT telomerase detection strategy significant for dynamic investigation of telomerase related physiological processes as well as cancer diagnosis.

Tracking single particles for hours via continuous DNA-mediated fluorophore exchange

Monitoring biomolecules in single-particle tracking experiments is typically achieved by employing fixed organic dyes or fluorescent fusion proteins linked to a target of interest. However, photobleaching typically limits observation times to merely a few seconds, restricting downstream statistical analysis and observation of rare biological events. Here, we overcome this inherent limitation via continuous fluorophore exchange using DNA-PAINT, where fluorescently-labeled oligonucleotides reversibly bind to a single-stranded DNA handle attached to the target molecule. Such versatile and facile labeling allows uninterrupted monitoring of single molecules for extended durations. We demonstrate the power of our approach by observing DNA origami on membranes for tens of minutes, providing perspectives for investigating cellular processes on physiologically relevant timescales.

The length of single-particle tracking experiments are limited due to photobleaching. Here the authors achieve long-term single-particle tracking with continuous fluorophore exchange in DNA-PAINT and use this to observe DNA origami on lipid bilayers for tens of minutes.

Encoding Fluorescence Anisotropic Barcodes with DNA Fameworks

Fluorescence anisotropy (FA) holds great potential for multiplexed analysis and imaging of biomolecules since it can effectively discriminate fluorophores with overlapping emission spectra. Nevertheless, its susceptibility to environmental variation hampers its widespread applications in biology and biotechnology. In this study, we design FA DNA frameworks (FAFs) by scaffolding fluorophores in a fluorescent protein-like microenvironment. We find that the FA stability of the fluorophores is remarkably improved due to the sequestration effects of FAFs. The FA level of the fluorophores can be finely tuned when placed at different locations on an FAF, analogous to spectral shifts of protein-bound fluorophores. The high programmability of FAFs further enables the design of a spectrum of encoded FA barcodes for multiplexed sensing of nucleic acids and multiplexed labeling of live cells. This FAF system thus establishes a new paradigm for designing multiplexing FA probes for cellular imaging and other biological applications.

MXenes: synthesis, incorporation, and applications in ultrafast lasers

The rapid expansion of nanotechnology and material science prompts two-dimensional (2D) materials to be extensively used in biomedicine, optoelectronic devices, and ultrafast photonics. Owing to the broadband operation, ultrafast recovery time, and saturable absorption properties, 2D materials become the promising candidates for being saturable absorbers in ultrafast pulsed lasers. In recent years, the novel 2D MXene materials have occupied the forefront due to their superior optical and electronic, as well as mechanical and chemical properties. Herein, we introduce the fabrication methods of MXenes, incorporation methods of combining 2D materials with laser cavities, and applications of ultrafast pulsed lasers based on MXenes. Firstly, top-down and bottom-up approaches are two types of fabrication methods, where top-down way mainly contains acid etching and the chief way of bottom-up method is chemical vapor deposition. In addition to these two typical ones, other methods are also discussed. Then we summarize the advantages and drawbacks of these approaches. Besides, commonly used incorporation methods, such as sandwich structure, optical deposition, as well as coupling with D-shaped, tapered, and photonic crystal fibers are reviewed. We also discuss their merits, defects, and conditions of selecting different methods. Moreover, we introduce the state of the art of ultrafast pulsed lasers based on MXenes at different wavelengths and highlight some excellent output performance. Ultimately, the outlook for improving fabrication methods and applications of MXene-based ultrafast lasers is presented.

SeqStain is an efficient method for multiplexed, spatialomic profiling of human and murine tissues

Spatial organization of molecules and cells in complex tissue microenvironments provides essential organizational cues in health and disease. A significant need exists for improved visualization of these spatial relationships. Here, we describe a multiplex immunofluorescence imaging method, termed SeqStain, that uses fluorescent-DNA-labeled antibodies for immunofluorescent staining and nuclease treatment for de-staining that allows selective enzymatic removal of the fluorescent signal. SeqStain can be used with primary antibodies, secondary antibodies, and antibody fragments to efficiently analyze complex cells and tissues. Additionally, incorporation of specific endonuclease restriction sites in antibody labels allows for selective removal of fluorescent signals while retaining other signals that can serve as marks for subsequent analyses. The application of SeqStain on human kidney tissue provided a spatialomic profile of the organization of >25 markers in the kidney, highlighting it as a versatile, easy-to-use, and gentle new technique for spatialomic analyses of complex microenvironments.

A facile combinatorial approach to construct a ratiometric fluorescent sensor: application for the real-time sensing of cellular pH changes

Realtime monitoring of the cellular environment, such as the intracellular pH, in a defined cellular space provides a comprehensive understanding of the dynamics processes in a living cell. Considering the limitation of spatial resolution in conventional microscopy measurements, multiple types of fluorophores assembled within that space would behave as a single fluorescent probe molecule. Such a character of microscopic measurements enables a much more flexible combinatorial design strategy in developing fluorescent probes for given targets. Nanomaterials with sizes smaller than the microscopy spatial resolution provide a scaffold to assemble several types of fluorophores with a variety of optical characteristics, therefore providing a convenient strategy for designing fluorescent pH sensors. In this study, fluorescein (CF) and tetramethylrhodamine (CR) were assembled on a DNA nanostructure with controlling the number of each type of fluorophore. By taking advantage of the different responses of CF and CR emissions to the pH environment, an appropriate assembly of both CF and CR on DNA origami enabled a controlled intensity of fluorescence emission and ratiometric pH monitoring within the space defined by DNA origami. The CF and CR-assembled DNA origami was successfully applied for monitoring the intracellular pH changes.

DNA nanotechnology-empowered nanoscopic imaging of biomolecules

DNA nanotechnology has led to the rise of DNA nanostructures, which possess programmable shapes and are capable of organizing different functional molecules and materials. A variety of DNA nanostructure-based imaging probes have been developed.

Development of a sequencing system for spatial decoding of DNA barcode molecules at single-molecule resolution

Single-cell transcriptome analysis has been revolutionized by DNA barcodes that index cDNA libraries, allowing highly multiplexed analyses to be performed. Furthermore, DNA barcodes are being leveraged for spatial transcriptomes. Although spatial resolution relies on methods used to decode DNA barcodes, achieving single-molecule decoding remains a challenge. Here, we developed an in-house sequencing system inspired by a single-molecule sequencing system, HeliScope, to spatially decode DNA barcode molecules at single-molecule resolution. We benchmarked our system with 30 types of DNA barcode molecules and obtained an average read length of ~20 nt with an error rate of less than 5% per nucleotide, which was sufficient to spatially identify them. Additionally, we spatially identified DNA barcode molecules bound to antibodies at single-molecule resolution. Leveraging this, we devised a method, termed “molecular foot printing”, showing potential for applying our system not only to spatial transcriptomics, but also to spatial proteomics.

Oguchi et al. developed an in-house sequencing system to spatially decode DNA barcode molecules at single-molecule resolution. They obtain an average read length of 20 nucleotides with an error rate of less than 5% per nucleotide. Leveraging this system, they devised a molecular foot printing method that can be applied spatial proteomics as well as spatial transcriptomics.

DNA-Origami-Based Fluorescence Brightness Standards for Convenient and Fast Protein Counting in Live Cells

Fluorescence microscopy has been one of the most discovery-rich methods in biology. In the digital age, the discipline is becoming increasingly quantitative. Virtually all biological laboratories have access to fluorescence microscopes, but abilities to quantify biomolecule copy numbers are limited by the complexity and sophistication associated with current quantification methods. Here, we present DNA-origami-based fluorescence brightness standards for counting 5-300 copies of proteins in bacterial and mammalian cells, tagged with fluorescent proteins or membrane-permeable organic dyes. Compared to conventional quantification techniques, our brightness standards are robust, straightforward to use, and compatible with nearly all fluorescence imaging applications, thereby providing a practical and versatile tool to quantify biomolecules via fluorescence microscopy.

Encoding quantized fluorescence states with fractal DNA frameworks

Signal amplification in biological systems is achieved by cooperatively recruiting multiple copies of regulatory biomolecules. Nevertheless, the multiplexing capability of artificial fluorescent amplifiers is limited due to the size limit and lack of modularity. Here, we develop Cayley tree-like fractal DNA frameworks to topologically encode the fluorescence states for multiplexed detection of low-abundance targets. Taking advantage of the self-similar topology of Cayley tree, we use only 16 DNA strands to construct n-node (n = 53) structures of up to 5 megadalton. The high level of degeneracy allows encoding 36 colours with 7 nodes by site-specifically anchoring of distinct fluorophores onto a structure. The fractal topology minimises fluorescence crosstalk and allows quantitative decoding of quantized fluorescence states. We demonstrate a spectrum of rigid-yet-flexible super-multiplex structures for encoded fluorescence detection of single-molecule recognition events and multiplexed discrimination of living cells. Thus, the topological engineering approach enriches the toolbox for high-throughput cell imaging.

Though DNA framework-based scaffolds for biomolecular assembly are attractive for bioimaging applications, realizing super-multiplex fluorescent amplifiers remains a challenge. Here, the authors report a topological engineering approach to designing fractal DNA frameworks for multiplexed amplifiers.

A 6-nm ultra-photostable DNA FluoroCube for fluorescence imaging

Photobleaching limits extended imaging of fluorescent biological samples. Here, we developed DNA based “FluoroCubes” that are similar in size to the green fluorescent protein (GFP), have single-point attachment to proteins, have a ~54-fold higher photobleaching lifetime and emit ~43-fold more photons than single organic dyes. We demonstrate that DNA FluoroCubes provide outstanding tools for single-molecule imaging, allowing the tracking of single motor proteins for >800 steps with nanometer precision.

Efficient Small-Scale Conjugation of DNA to Primary Antibodies for Multiplexed Cellular Targeting

The combination of the specificity of antibodies and the programmability of DNA nanotechnology has provided the scientific community with a powerful tool to label and unambiguously distinguish a large number of subcellular targets using fluorescence-based read-out methods. Whereas primary antibodies are commercially available for a large class of targets, a general stoichiometric site-selective DNA labeling strategy for this affinity reagent is lacking. Here we present a universal, site-selective conjugation method using a small photo-cross-linkable protein G adaptor that allows labeling of antibodies of different host species with a controlled number of short oligonucleotides (ODNs). Importantly, we illustrate that this conjugation method can be directly performed on commercially available primary antibodies on a small scale and without cross-reactivity towards bovine serum albumin. In addition, we present a general benchtop-compatible strategy to purify DNA-labeled antibodies without a loss of function. The application of protein G-ODN-labeled primary antibodies is demonstrated by employing three well-known methods for detecting subcellular targets using fluorescence read-out, including flow cytometry, DNA-PAINT, and dSTORM. This work thus establishes a general and efficient platform for the synthesis of a library of unique ODN–antibody conjugates, facilitating the broader use of DNA-based programmable tags for multiplexed labeling to identify subcellular features with nanometer precision and improving our understanding of cellular structure and function.

Improved Optical Multiplexing with Temporal DNA Barcodes

Many biochemical events of importance are complex and dynamic. Fluorescence microscopy offers a versatile solution to study the dynamics of biology at the mesoscale. An important challenge in the field is the simultaneous study of several objects of interest, referred to as optical multiplexing. For improved multiplexing, some prior techniques used repeated reporter washing or the geometry of nanostructures; however, these techniques require complex nanostructure assembly, multiple reporters, or advanced multistep drift correction. Here we propose a time-based approach, for improved optical multiplexing, that uses readily available inexpensive reporters and requires minimal preparation efforts. We program short DNA strands, referred hereby as DNA devices, such that they undergo unique conformation changes in the presence of the dye-labeled reporters. The universal fluorescent reporter transiently binds with the devices to report their activity. Since each device is programmed to exhibit different hybridization kinetics, their fluorescent time trace, referred to as the temporal barcode, will be unique. We model our devices using continuous-time Markov chains and use stochastic simulation algorithm to generate their temporal patterns. We first ran simulation experiments with a small number of DNA devices, demonstrating several distinct temporal barcodes, all of which use a single dye color. Later, using nanostructure-based devices, we designed a much larger pool of temporal barcodes and used machine learning for classification of these barcodes. Our simulation experiments and design principles can aid in the experimental demonstration of the DNA devices.

Programming Structured DNA Assemblies to Probe Biophysical Processes

Structural DNA nanotechnology is beginning to emerge as a widely accessible research tool to mechanistically study diverse biophysical processes. Enabled by scaffolded DNA origami in which a long single strand of DNA is weaved throughout an entire target nucleic acid assembly to ensure its proper folding, assemblies of nearly any geometric shape can now be programmed in a fully automatic manner to interface with biology on the 1-100-nm scale. Here, we review the major design and synthesis principles that have enabled the fabrication of a specific subclass of scaffolded DNA origami objects called wireframe assemblies. These objects offer unprecedented control over the nanoscale organization of biomolecules, including biomolecular copy numbers, presentation on convex or concave geometries, and internal versus external functionalization, in addition to stability in physiological buffer. To highlight the power and versatility of this synthetic structural biology approach to probing molecular and cellular biophysics, we feature its application to three leading areas of investigation: light harvesting and nanoscale energy transport, RNA structural biology, and immune receptor signaling, with an outlook toward unique mechanistic insight that may be gained in these areas in the coming decade.

Programming Temporal DNA Barcodes for Single-Molecule Fingerprinting

Fluorescence microscopy enables simultaneous observation of the dynamics of single molecules in a large region of interest. Most traditional techniques employ either the geometry or the color of single molecules to uniquely identify (or barcode) different species of interest. However, these techniques require complex sample preparation and multicolor hardware setup. In this work, we introduce a time-based amplification-free single-molecule barcoding technique using easy-to-design nucleic acid strands. A dye-labeled complementary reporter strand transiently binds to the programmed nucleic acid strands to emit temporal intensity signals. We program the DNA strands to emit uniquely identifiable temporal signals for molecular-scale fingerprinting. Since the reporters bind transiently to DNA devices, our method offers relative immunity to photobleaching. We use a single universal reporter strand for all DNA devices making our design extremely cost-effective. We show DNA strands can be programmed for generating a multitude of uniquely identifiable molecular barcodes. Our technique can be easily incorporated with the existing orthogonal methods that use wavelength or geometry to generate a large pool of distinguishable molecular barcodes thereby enhancing the overall multiplexing capabilities of single-molecule imaging.

Supramolecular polymerization: challenges and advantages of various methods in assessing the aggregation mechanism

Oligothiophenes with branched alkyl end groups show distinct aggregation in organic solvents. The process of supramolecular polymerization is assessed by three different methods (UV-vis absorption and fluorescence emission spectroscopy and dynamic light scattering) to exclude artifacts. An apparent dependence of the degree of aggregation on the concentration of the oligomers is observed. Above the upper limit of concentration (a lower micromolar range for the present class of compounds), experimental data delivered conflicting results and the concentration should not therefore be exceeded. Scanning force microscopy and molecular dynamics simulations confirm the formation of one-dimensional aggregates with presumably helical arrangement of the achiral monomers.

DNA Origami Nanophotonics and Plasmonics at Interfaces

DNA nanotechnology provides a versatile toolbox for creating custom and accurate shapes that can serve as versatile templates for nanopatterning. These DNA templates can be used as molecular-scale precision tools in, for example, biosensing, nanometrology, and super-resolution imaging, and biocompatible scaffolds for arranging other nano-objects, for example, for drug delivery applications and molecular electronics. Recently, increasing attention has been paid to their potent use in nanophotonics since these modular templates allow a wide range of plasmonic and photonic ensembles ranging from DNA-directed nanoparticle and fluorophore arrays to entirely metallic nanostructures. This Feature Article focuses on the DNA-origami-based nanophotonics and plasmonics-especially on the methods that take advantage of various substrates and interfaces for the foreseen applications.

DNA Origami Route for Nanophotonics

The specificity and simplicity of the Watson-Crick base pair interactions make DNA one of the most versatile construction materials for creating nanoscale structures and devices. Among several DNA-based approaches, the DNA origami technique excels in programmable self-assembly of complex, arbitrary shaped structures with dimensions of hundreds of nanometers. Importantly, DNA origami can be used as templates for assembly of functional nanoscale components into three-dimensional structures with high precision and controlled stoichiometry. This is often beyond the reach of other nanofabrication techniques. In this Perspective, we highlight the capability of the DNA origami technique for realization of novel nanophotonic systems. First, we introduce the basic principles of designing and fabrication of DNA origami structures. Subsequently, we review recent advances of the DNA origami applications in nanoplasmonics, single-molecule and super-resolution fluorescent imaging, as well as hybrid photonic systems. We conclude by outlining the future prospects of the DNA origami technique for advanced nanophotonic systems with tailored functionalities.

Fluorescent Silica Nanoparticles with Well-Separated Intensity Distributions from Batch Reactions

Silica chemistry provides pathways to uniquely tunable nanoparticle platforms for biological imaging. It has been a long-standing problem to synthesize fluorescent silica nanoparticles (SNPs) in batch reactions with high and low fluorescence intensity levels for reliable use as an intensity barcode, which would greatly increase the number of molecular species that could be tagged intracellularly and simultaneously observed in conventional fluorescence microscopy. Here, employing an amino-acid catalyzed growth, highly fluorescent SNP probes were synthesized with sizes <40 nm and well-separated intensity distributions, as mapped by single-particle imaging techniques. A seeded growth approach was used to minimize the rate of secondary particle formation. Organic fluorescent dye affinity for the SNP during shell growth was tuned using specifics of the organosilane linker chemistry. This work highlights design considerations in the development of fluorescent probes with well-separated intensity distributions synthesized in batch reactions for single-particle imaging and sensing applications, where heterogeneities across the nanoparticle ensemble are critical factors in probe performance.

DNA-based construction at the nanoscale: emerging trends and applications

The field of structural DNA nanotechnology has evolved remarkably-from the creation of artificial immobile junctions to the recent DNA-protein hybrid nanoscale shapes-in a span of about 35 years. It is now possible to create complex DNA-based nanoscale shapes and large hierarchical assemblies with greater stability and predictability, thanks to the development of computational tools and advances in experimental techniques. Although it started with the original goal of DNA-assisted structure determination of difficult-to-crystallize molecules, DNA nanotechnology has found its applications in a myriad of fields. In this review, we cover some of the basic and emerging assembly principles: hybridization, base stacking/shape complementarity, and protein-mediated formation of nanoscale structures. We also review various applications of DNA nanostructures, with special emphasis on some of the biophysical applications that have been reported in recent years. In the outlook, we discuss further improvements in the assembly of such structures, and explore possible future applications involving super-resolved fluorescence, single-particle cryo-electron (cryo-EM) and x-ray free electron laser (XFEL) nanoscopic imaging techniques, and in creating new synergistic designer materials.

Nanometrology and super-resolution imaging with DNA

Structural DNA nanotechnology is revolutionizing the ways researchers construct arbitrary shapes and patterns in two and three dimensions on the nanoscale. Through Watson-Crick base pairing, DNA can be programmed to form nanostructures with high predictability, addressability, and yield. The ease with which structures can be designed and created has generated great interest for using DNA for a variety of metrology applications, such as in scanning probe microscopy and super-resolution imaging. An additional advantage of the programmable nature of DNA is that mechanisms for nanoscale metrology of the structures can be integrated within the DNA objects by design. This programmable structure-property relationship provides a powerful tool for developing nanoscale materials and smart rulers.