General and selective deoxygenation by hydrogen using a reusable earth-abundant metal catalyst

Hydrogen-Induced Formation of Surface Acid Sites on Pt/Al(PO3)3 Enables Remarkably Efficient Hydrogenolysis of C-O Bonds in Alcohols and Ethers

The hydrogenolysis of oxygenates such as alcohols and ethers is central to the biomass valorization and also a valuable transformation in organic synthesis. However, a mild and efficient catalyst system for the hydrogenolysis of a large variety of alcohols and ethers with various functional groups is still underdeveloped. Here, we report an aluminum metaphosphate-supported Pt nanoparticles (Pt/Al(PO3)3) for the hydrogenolysis of a wide variety of primary, secondary, and tertiary alkyl and benzylic alcohols, and dialkyl, aryl alkyl, and diaryl ethers, including biomass-derived furanic compounds, under mild conditions (0.1-1 atm of H2, as low as 70 °C). Mechanistic studies suggested that H2 induces formation of the surface Brønsted acid sites via its cleavage by supported Pt nanoparticles. Accordingly, the high efficiency and the wide applicability of the catalyst system are attributed to the activation and cleavage of C-O bonds by the hydrogen-induced Brønsted acid sites with the assistance of Lewis acidic Al sites on the catalyst surface. The high efficiency of the catalyst implies its potential application in energy-efficient biomass valorization or fine chemical synthesis.

A general and robust Ni-based nanocatalyst for selective hydrogenation reactions at low temperature and pressure

Catalytic hydrogenations are important and widely applied processes for the reduction of organic compounds both in academic laboratories and in industry. To perform these reactions in sustainable and practical manner, the development and applicability of non-noble metal-based heterogeneous catalysts is crucial. Here, we report highly active and air-stable nickel nanoparticles supported on mesoporous silica (MCM-41) as a general and selective hydrogenation catalyst. This catalytic system allows for the hydrogenation of carbonyl compounds, nitroarenes, N-heterocycles, and unsaturated carbon─carbon bonds in good to excellent selectivity under very mild conditions (room temperature to 80°C, 2 to 10 bar H2). Furthermore, the optimal nickel/meso-silicon dioxide catalyst is reusable (4 cycles) without loss of its catalytic activity.

Development of a General and Selective Nanostructured Cobalt Catalyst for the Hydrogenation of Benzofurans, Indoles and Benzothiophenes

The selective hydrogenation of benzofurans in the presence of a heterogeneous non-noble metal catalyst is reported. The developed optimal catalytic material consists of cobalt-cobalt oxide core-shell nanoparticles supported on silica, which has been prepared by the immobilization and pyrolysis of cobalt-DABCO-citric acid complex on silica under argon at 800 °C. This novel catalyst allows for the selective hydrogenation of simple and functionalized benzofurans to 2,3-dihydrobenzofurans as well as related heterocycles. The versatility of the reported protocol is showcased by the reduction of selected drugs and deuteration of heterocycles. Further, the stability, recycling, and reusability of the Co-nanocatalyst are demonstrated.

Synthesis of 3,4‐Dihydro‐2 H ‐Pyrroles from Ketones, Aldehydes, and Nitro Alkanes via Hydrogenative Cyclization

Syntheses of N‐heterocyclic compounds that permit a flexible introduction of various substitution patterns by using inexpensive and diversely available starting materials are highly desirable. Easy to handle and reusable catalysts based on earth‐abundant metals are especially attractive for these syntheses. We report here on the synthesis of 3,4‐dihydro‐2H‐pyrroles via the hydrogenation and cyclization of nitro ketones. The latter are easily accessible from three components: a ketone, an aldehyde and a nitroalkane. Our reaction has a broad scope and 23 of the 33 products synthesized are compounds which have not yet been reported. The key to the general hydrogenation/cyclization reaction is a highly active, selective and reusable nickel catalyst, which was identified from a library of 24 earth‐abundant metal catalysts.

Synergy between homogeneous and heterogeneous catalysis

Catalysis plays a decisive role in the advancement of sustainable processes in chemical, pharmaceutical, and agrochemical industries as well as petrochemical, material, and energy technologies. Notably, more than 80% of...

Ru(dppbsa)-catalyzed hydrodeoxygenation and reductive etherification of ketones and aldehydes

Ru(dppbsa)-catalyzed hydrodeoxygenation and reductive etherification of ketones and aldehydes were developed. The carbonyl substrates without β-CH functionality follow the hydrogenation-hydrogenolysis path, wherein the hydrogenolysis of the alkanol intermediates presents as...

Metal-Organic Framework-Confined Single-Site Base-Metal Catalyst for Chemoselective Hydrodeoxygenation of Carbonyls and Alcohols

Chemoselective deoxygenation of carbonyls and alcohols using hydrogen by heterogeneous base-metal catalysts is crucial for the sustainable production of fine chemicals and biofuels. We report an aluminum metal-organic framework (DUT-5) node support cobalt(II) hydride, which is a highly chemoselective and recyclable heterogeneous catalyst for deoxygenation of a range of aromatic and aliphatic ketones, aldehydes, and primary and secondary alcohols, including biomass-derived substrates under 1 bar H₂. The single-site cobalt catalyst (DUT-5-CoH) was easily prepared by postsynthetic metalation of the secondary building units (SBUs) of DUT-5 with CoCl₂ followed by the reaction of NaEt₃BH. X-ray photoelectron spectroscopy and X-ray absorption near-edge spectroscopy (XANES) indicated the presence of Co^II and Al^III centers in DUT-5-CoH and DUT-5-Co after catalysis. The coordination environment of the cobalt center of DUT-5-Co before and after catalysis was established by extended X-ray fine structure spectroscopy (EXAFS) and density functional theory. The kinetic and computational data suggest reversible carbonyl coordination to cobalt preceding the turnover-limiting step, which involves 1,2-insertion of the coordinated carbonyl into the cobalt-hydride bond. The unique coordination environment of the cobalt ion ligated by oxo-nodes within the porous framework and the rate independency on the pressure of H₂ allow the deoxygenation reactions chemoselectively under ambient hydrogen pressure.

Visible-light-induced 4CzIPN/LiBr system: a tireless electron shuttle to enable reductive deoxygenation of N-heteroaryl carbonyls

A mild visible-light-induced photoredox system was found to be a tireless electron shuttle to enable reductive deoxygenation of N-heteroaryl carbonyls.

Light-Driven Metal-Free Direct Deoxygenation of Alcohols under Mild Conditions

Hydroxyl is widely found in organic molecules as functional group and its deprivation plays an inevitable role in organic synthesis. However, the direct cleavage of Csp³-O bond in alcohols with high selectivity and efficiency, especially without the assistance of metal catalyst, has been a formidable challenge because of its strong bond dissociation energy and unfavorable thermodynamics. Herein, an efficient metal-free strategy that enables direct deoxygenation of alcohols has been developed for the first time, with hydrazine as the reductant induced by light. This protocol features mild reaction conditions, excellent functional group tolerance, and abundant and easily available starting materials, rendering selective deoxygenation of a variety of 1° and 2° alcohols, vicinal diols, and β-1 and even β-O-4 models of natural wood lignin. This strategy is also highlighted by its “traceless” and non-toxic by-products N₂ and H₂, as readily escapable gases. Mechanistic studies demonstrated dimethyl sulfide being a key intermediate in this transformation.

•

Metal-free direct deoxygenation of alcohols enabled by light

•

Traceless non-toxic N₂ and H₂ as by-products

•

Broad substrate scope and wide functional group compatibility

•

Converting lignin models into simple aromatics

The Synthesis of Primary Amines through Reductive Amination Employing an Iron Catalyst

The reductive amination of ketones and aldehydes by ammonia is a highly attractive method for the synthesis of primary amines. The use of catalysts, especially reusable catalysts, based on earth-abundant metals is similarly appealing. Here, the iron-catalyzed synthesis of primary amines through reductive amination was realized. A broad scope and a very good tolerance of functional groups were observed. Ketones, including purely aliphatic ones, aryl-alkyl, dialkyl, and heterocyclic, as well as aldehydes could be converted smoothly into their corresponding primary amines. In addition, the amination of pharmaceuticals, bioactive compounds, and natural products was demonstrated. Many functional groups, such as hydroxy, methoxy, dioxol, sulfonyl, and boronate ester substituents, were tolerated. The catalyst is easy to handle, selective, and reusable and ammonia dissolved in water could be employed as the nitrogen source. The key is the use of a specific Fe complex for the catalyst synthesis and an N-doped SiC material as catalyst support.

Ultra-small cobalt nanoparticles from molecularly-defined Co-salen complexes for catalytic synthesis of amines

We report the synthesis of in situ generated cobalt nanoparticles from molecularly defined complexes as efficient and selective catalysts for reductive amination reactions. In the presence of ammonia and hydrogen, cobalt–salen complexes such as cobalt(ii)–N,N′-bis(salicylidene)-1,2-phenylenediamine produce ultra-small (2–4 nm) cobalt-nanoparticles embedded in a carbon–nitrogen framework. The resulting materials constitute stable, reusable and magnetically separable catalysts, which enable the synthesis of linear and branched benzylic, heterocyclic and aliphatic primary amines from carbonyl compounds and ammonia. The isolated nanoparticles also represent excellent catalysts for the synthesis of primary, secondary as well as tertiary amines including biologically relevant N-methyl amines.

We report the synthesis of in situ generated cobalt nanoparticles from molecularly defined complexes as efficient and selective catalysts for reductive amination reactions.