Concurrent stiffening and softening in hydrogels under dehydration

Constructing anisotropic and strong polysaccharide-based hydrogels with stretching-dehydration strategy: Effect of sodium alginate, pectin, gellan gum, and curdlan

Polysaccharide-based hydrogels are widely utilized in the food industry and materials science due to their safety and abundance from natural sources. However, their functionality is often limited by poor mechanical properties, primarily due to their simple and isotropic structures. In this study, the stretching-dehydration (SD) processing was applied to create anisotropic structure and enhance the mechanical properties in polysaccharide-based hydrogels, specifically sodium alginate (SA), pectin (PE), gellan gum (GG), and curdlan (CU). Among these, low molecular weight sodium alginate (SA-L) hydrogel exhibited notable stretching-induced anisotropy and structural stability during dehydration. Furthermore, increasing the controlled strains (CSN) could improve anisotropy, stretching strength, and Young's modulus which reached up to 100 MPa in anisotropic SA-L hydrogel. The anisotropic hydrogels closely mimicked the microstructure of whole-muscle foods. Sensory evaluations highlighted the enhanced chewiness and hardness, suggesting the anisotropic hydrogels are promising candidates for emulating whole-muscle textures. This work highlights the potential of anisotropic hydrogels produced through simple SD treatment as advanced materials for both food and biomimetic applications.

Co-initiating-system dual-mechanism drives the design of printable entangled polymer multinetworks

Entanglement significantly enhances the mechanical performance and functionality of both natural and synthetic materials. However, developing straightforward, versatile strategies for creating high-performance entangled polymer materials remains a challenge. Here, a co-initiating-system dual-mechanism strategy is designed for fabricating printable entangled polymer multinetworks. This thermal-light dual-initiation process benefits the synthesis of high-molecular-weight polymers and promotes the rapid formation of multinetworks within hydrogels. The resulting long polymer chains enable hydrogels with higher mechanical performance, lower stress relaxation, and activation energy compared to short polymer chain-contained samples. Such a method proves more effective than traditional self-thickening and strengthening techniques for enhancing hydrogel entanglements and is also compatible with additive manufacturing, enabling the design of complex 2D webs with adaptive mechanical performance and capable of detecting and sensing applications. This work provides an effective strategy for designing high-performance entangled polymer materials, which are set to impact numerous fields, from advanced sensing to material science and beyond.

Study on the structural characterization of Premna microphylla Turcz polysaccharides and their improvement effect on the properties of chitosan composite gel

Bioactive polysaccharide composite gels provide strategy for improving the defects of chitosan (CS) gel. The aim of this study was to characterize the structure of Premna microphylla Turcz polysaccharide (PMTP) and investigate the improvement of different PMTP concentrations (4, 6, 8, 10, and 12 wt%) on the PMTP/CS composite gels' properties. PMTP is an acidic heteropolysaccharide with →4)-α-D-GalpA-(1→ and →4)-α-D-Galpa-6-Ome-(1→ as the backbone structure. And PMTP transformed the gel's framework from the lamellar structure of CS gel to 3D porous network constructed by connected nanofibers. This resulted in the increase of surface area from 11.28 to 89.72 m2/g and reduction of pore size from 5.76 to 0.52 μm. Moreover, the mechanical properties of PMTP/CS composite gel was significantly improved 17.9 times higher than that of CS gel. Accordingly, the water holding, swelling, rheology and thermal stability of PMTP/CS gel were further improved. Study on gelation mechanism proved that the formation of composite gel's 3D network was mainly dominated by electrostatic interaction. Finally, Caco-2 cell assay in vitro confirmed the excellent cytocompatibility of PMTP/CS gel. In conclusion, this work provides a scientific reference for the design of bioactive polysaccharide composite gel for food engineering field.

Mucus-Inspired Supramolecular Adhesives: Exploring the Synergy between Dynamic Networks and Functional Liquids

The exceptional physicochemical and mechanical properties of mucus have inspired the development of dynamic mucus-based materials for a wide range of applications. Mucus's combination of noncovalent interactions and rich liquid phases confer a range of properties. This perspective explores the synergy between dynamic networks and functional liquids in mucus-inspired supramolecular adhesives. It delves into the biological principles underlying mucus's dynamic regulation and adhesive properties, the fundamentals of supramolecular adhesive design, and the transformative potential of these materials in biomedical applications. Finally, this perspective proposes potential directions for the molecular engineering of mucus-inspired supramolecular materials, emphasizing the need for interdisciplinary approaches to harness their full potential for biomedical and sustainable applications.

Current state of cancer immunity cycle: new strategies and challenges of using precision hydrogels to treat breast cancer

The cancer-immunity cycle provides a framework for a series of events in anti-cancer immune responses, initiated by T cell-mediated tumor cell killing, which leads to antigen presentation and T cell stimulation. Current immunomodulatory therapies for breast cancer are often associated with short duration, poor targeting to sites of action, and severe side effects. Hydrogels, with their extracellular matrix-mimicking properties, tunable characteristics, and diverse bioactivities, have garnered significant attention for their ability to locally deliver immunomodulators and cells, providing an immunomodulatory microenvironment to recruit, activate, and expand host immune cells. This review focuses on the design considerations of hydrogel platforms, including polymer backbone, crosslinking mechanisms, physicochemical properties, and immunomodulatory components. The immunomodulatory effects and therapeutic outcomes of various hydrogel systems in breast cancer treatment and tissue regeneration are highlighted, encompassing hydrogel depots for immunomodulator delivery, hydrogel scaffolds for cell delivery, and immunomodulatory hydrogels dependent on inherent material properties. Finally, the challenges that persist in current systems and future directions for immunomodulatory hydrogels are discussed.

Extraction and incorporation of cellulose microfibers from textile wastes into MXene-enhanced PVA-borax hydrogel for multifunctional wearable sensors

Conductive hydrogel has drawn great concern in wearable sensors, human-machine interfaces, artificial intelligence (AI), health monitoring, et al. But it still remains challenge to develop hydrogel through facile and sustainable methods. In this work, a conductive, flexible, bendable and self-healing hydrogel (PBCM) composed of polyvinyl alcohol (PVA), borax, cellulose microfibers (CMFs) and MXene nanosheets was fabricated by a simple and efficient strategy. The carboxylated CMFs were extracted from waste ramie fibers via a one-pot ammonium persulfate oxidation method. The crystallinity and tensile strength were increased 70 % and 4 times due to the addition of CMFs and MXene compared to the pristine PVA-borax hydrogel. The incorporation of MXene nanosheets acts as multifunctional cross-linkers and energy transfer platform, promoting the electrical conductivity, stretchability and bendability of hydrogel remarkably. The PBCM-2 hydrogel exhibited the maximum electrical conductivity of 0.81 S/cm. Additionally, the dynamic borate ester linkage imparts self-healing ability to the hydrogel. The resulting PBCM-2 hydrogel demonstrated excellent resistance to fire and pH response properties. Moreover, it showed sensitivity in monitoring various human physiological movements, including finger, wrist, elbow, knee bending and drinking water, indicating its potential for wearable sensing applications like health care and sports training.

Molecular Dynamics Simulation of Structural Assembly and Hydration of Hyaluronic Acid in Salt Aqueous Buffer

Hyaluronic acid (HA) is a nonsulfonated glycosaminoglycan critical in tissue development, physiology, and disease processes. To develop biomimetic in vitro models based on HA, it is important to understand the interaction of this polymer in its pristine form and with physiological solvents. However, atomistic simulations of HA chains are computationally challenging, especially when studying interactions with salts. To tackle this challenge, this study combined quantum mechanical (QM) calculations and molecular dynamics (MD) simulations to investigate HA's structure and behavior. This multiscale approach balances accuracy and computational efficiency. QM calculations emphasize the role of weak noncovalent hydrogen bonds in stabilizing d-glucuronic acid with N-acetyl-d-glucosamine. MD results show that more HA layers lead to a larger structure, higher water sensitivity, and increased dynamic and interlayer complexity. Our QM and MD simulations shed light on the structural dynamics and interactions of HA polymers and HA hydrogels, aiding in their design and optimization for biomedical applications and bridging computational and experimental approaches.

Elasticity of Swollen and Folded Polyacrylamide Hydrogel Using the MARTINI Coarse-Grained Model

One of the key advantages of using a hydrogel is its superb control over elasticity obtained through variations of constituent polymer and water. The underlying molecular nature of a hydrogel is a fundamental origin of hydrogel mechanics. In this article, we report a Polyacrylamide (PAAm)-based hydrogel model using the MARTINI coarse-grained (CG) force field. The MARTINI hydrogel is molecularly developed through Iterative Boltzmann inversion (IBI) using all-atom molecular dynamics (AAMD), and its quality is evaluated through the experimental realization of the target hydrogel. The developed model offers a mechanically high-fidelity CG hydrogel that can access large-scale water-containing hydrogel behavior, which is difficult to explore through AAMD in practical time. With the modeled hydrogel, we reveal that the polymer conformation modulates the elasticity of the hydrogel from a folded state to a swollen state, confirmed by the Panyukov model. The results provide a robust bridge for linking the polymer conformations and alignment to their bulk deformation, enabling the multifaceted and material-specific predictions required for hydrogel applications.

Ionic fuel-powered hydrogel actuators for soft robotics

HYPOTHESIS

Hydrogel actuators powered by chemical fuels are pivotal in autonomous soft robotics. Nevertheless, chemical waste accumulation caused by chemical fuels hampers the development of programmable and reusable hydrogel actuating systems. We propose the concept of ionic fuel-powered soft robotics which are constructed by programmable salt-responsive actuators and use waste-free ionic fuels.

EXPERIMENTS

Herein, soft hydrogel actuators were developed by orchestrating the Janus bilayer hydrogels' capacity for swelling and shrinking. Decomposable and easily removable ionic fuels were applied to power the actuators. Swelling tests were used to evaluate the deformability of the hydrogels. Tensile tests were performed to investigate the modulus of the hydrogels. The bonded interface composed of the interpenetrating polymer chains from both hydrogel layers bilayer was evidenced by the optical microscopy and scanning electron microscopy. The ionic conductivities of solutions were determined by a conductivity meter. Furthermore, a range of biomimetic soft robots with various shapes and asymmetrical structures have been designed and fabricated to execute complex functions.

FINDINGS

The programmable actuators powered by ionic fuel exhibit adjustable bending orientations, amplitudes, and durations, along with consistent cyclic actuations enabled by replenishment of the fuel without noticeable loss in performance. Many life-like programmable soft robotic systems were designed, indicating spatiotemporally controllable functions.

The Effects of Ultrasound on the Rehydration of Konjac Glucomannan/Soy Protein Isolate Gel and Simulation of Gas-Liquid Interface Evolution During the Rehydration Process

Soy protein isolate (SPI) possesses potential gelling properties, making it suitable for gel-based applications. However, the gel network stability and mechanical properties of SPI are relatively poor and can be improved through modifications or by combining it with other polymers, such as Konjac Glucomannan (KGM). Combining SPI with KGM can overcome the poor gel network stability and mechanical properties of SPI, but it reduces the water-absorbing capacity of the gel network after drying, which affects the quality characteristics of plant-based protein rehydrated foods and limits the economic feasibility of soy protein foods. In this study, SPI and KGM are the main research objects. By using the alkali method to construct SPI/KGM dry gels with good gel properties, the influence of different ultrasonic powers on the rehydration kinetics and performance changes of SPI/KGM dry gels is examined. The speed and state of water entering the pores are simulated by constructing different pore-size capillary filling models, and the rehydration mechanism of the gel is elucidated. This study provides research ideas and a theoretical basis for the application of ultrasonic wave technology in the study of dry product rehydration performance.

Direct Metal Transfer on Swellable Hydrogel with Dehydration-Induced Physical Adhesion

Composites of hydrogels and metals are gaining interest because of each material's unique properties. However, the stable adhesion of metals on hydrogels is challenging due to the mechanical mismatch at the soft-hard interface and the liquidity of the water components in hydrogels. We propose a facile physical-adhesion method that involves the dehydration process of hydrogels to transfer metals from a glass substrate. This method is based on the hydrophobic interaction between polymer chains and metals and is stable, even in water. Continuous metal wiring was achieved on a swollen hydrogel, and electrical conduction was effective for a soft electronic device. Therefore, our method could be a versatile method for integrating hydrogels and metals.

Mechanical Regulation of Polymer Gels

The mechanical properties of polymer gels devote to emerging devices and machines in fields such as biomedical engineering, flexible bioelectronics, biomimetic actuators, and energy harvesters. Coupling network architectures and interactions has been explored to regulate supportive mechanical characteristics of polymer gels; however, systematic reviews correlating mechanics to interaction forces at the molecular and structural levels remain absent in the field. This review highlights the molecular engineering and structural engineering of polymer gel mechanics and a comprehensive mechanistic understanding of mechanical regulation. Molecular engineering alters molecular architecture and manipulates functional groups/moieties at the molecular level, introducing various interactions and permanent or reversible dynamic bonds as the dissipative energy. Molecular engineering usually uses monomers, cross-linkers, chains, and other additives. Structural engineering utilizes casting methods, solvent phase regulation, mechanochemistry, macromolecule chemical reactions, and biomanufacturing technology to construct and tailor the topological network structures, or heterogeneous modulus compositions. We envision that the perfect combination of molecular and structural engineering may provide a fresh view to extend exciting new perspectives of this burgeoning field. This review also summarizes recent representative applications of polymer gels with excellent mechanical properties. Conclusions and perspectives are also provided from five aspects of concise summary, mechanical mechanism, biofabrication methods, upgraded applications, and synergistic methodology.

Injectable and in situ foaming shape-adaptive porous Bio-based polyurethane scaffold used for cartilage regeneration

Irregular articular cartilage injury is a common type of joint trauma, often resulting from intense impacts and other factors that lead to irregularly shaped wounds, the limited regenerative capacity of cartilage and the mismatched shape of the scaffods have contributed to unsatisfactory therapeutic outcomes. While injectable materials are a traditional solution to adapt to irregular cartilage defects, they have limitations, and injectable materials often lack the porous microstructures favorable for the rapid proliferation of cartilage cells. In this study, an injectable porous polyurethane scaffold named PU-BDO-Gelatin-Foam (PUBGF) was prepared. After injection into cartilage defects, PUBGF forms in situ at the site of the defect and exhibits a dynamic microstructure during the initial two weeks. This dynamic microstructure endows the scaffold with the ability to retain substances within its interior, thereby enhancing its capacity to promote chondrogenesis. Furthermore, the chondral repair efficacy of PUBGF was validated by directly injecting it into rat articular cartilage injury sites. The injectable PUBGF scaffold demonstrates a superior potential for promoting the repair of cartilage defects when compared to traditional porous polyurethane scaffolds. The substance retention ability of this injectable porous scaffold makes it a promising option for clinical applications.

Research on the Thermal Aging Mechanism of Polyvinyl Alcohol Hydrogel

Polyvinyl alcohol (PVA) hydrogels find applications in various fields, including machinery and tissue engineering, owing to their exceptional mechanical properties. However, the mechanical properties of PVA hydrogels are subject to alteration due to environmental factors such as temperature, affecting their prolonged utilization. To enhance their lifespan, it is crucial to investigate their aging mechanisms. Using physically cross-linked PVA hydrogels, this study involved high-temperature accelerated aging tests at 60 °C for 80 d and their performance was analyzed through macroscopic mechanics, microscopic morphology, and microanalysis tests. The findings revealed three aging stages, namely, a reduction in free water, a reduction in bound water, and the depletion of bound water, corresponding to volume shrinkage, decreased elongation, and a "tough-brittle" transition. The microscopic aging mechanism was influenced by intermolecular chain spacing, intermolecular hydrogen bonds, and the plasticizing effect of water. In particular, the loss of bound water predominantly affected the lifespan of PVA hydrogel structural components. These findings provide a reference for assessing and improving the lifespan of PVA hydrogels.

Improvements and Challenges of Hydrogel Polymer Electrolytes for Advanced Zinc Anodes in Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries (AZIBs) are widely regarded as desirable energy storage devices due to their inherent safety and low cost. Hydrogel polymer electrolytes (HPEs) are cross-linked polymers filled with water and zinc salts. They are not only widely used in flexible batteries but also represent an ideal electrolyte candidate for addressing the issues associated with the Zn anode, including dendrite formation and side reactions. In HPEs, an abundance of hydrophilic groups can form strong hydrogen bonds with water molecules, reducing water activity and inhibiting water decomposition. At the same time, special Zn2+ transport channels can be constructed in HPEs to homogenize the Zn2+ flux and promote uniform Zn deposition. However, HPEs still face issues in practical applications, including poor ionic conductivity, low mechanical strength, poor interface stability, and narrow electrochemical stability windows. This Review discusses the issues associated with HPEs for advanced AZIBs, and the recent progresses are summarized. Finally, the Review outlines the opportunities and challenges for achieving high performance HPEs, facilitating the utilization of HPEs in AZIBs.

Softening implantable bioelectronics: Material designs, applications, and future directions

Implantable bioelectronics, integrated directly within the body, represent a potent biomedical solution for monitoring and treating a range of medical conditions, including chronic diseases, neural disorders, and cardiac conditions, through personalized medical interventions. Nevertheless, contemporary implantable bioelectronics rely heavily on rigid materials (e.g., inorganic materials and metals), leading to inflammatory responses and tissue damage due to a mechanical mismatch with biological tissues. Recently, soft electronics with mechanical properties comparable to those of biological tissues have been introduced to alleviate fatal immune responses and improve tissue conformity. Despite their myriad advantages, substantial challenges persist in surgical handling and precise positioning due to their high compliance. To surmount these obstacles, softening implantable bioelectronics has garnered significant attention as it embraces the benefits of both rigid and soft bioelectronics. These devices are rigid for easy standalone implantation, transitioning to a soft state in vivo in response to environmental stimuli, which effectively overcomes functional/biological problems inherent in the static mechanical properties of conventional implants. This article reviews recent research and development in softening materials and designs for implantable bioelectronics. Examples featuring tissue-penetrating and conformal softening devices highlight the promising potential of these approaches in biomedical applications. A concluding section delves into current challenges and outlines future directions for softening implantable device technologies, underscoring their pivotal role in propelling the evolution of next-generation bioelectronics.

Dehydration regulates structural reorganization of dynamic hydrogels

The dehydration process is widely recognized as a significant phenomenon in nature. Hydrogels, which are important functional materials with high water content and crosslinked networks, encounter the issue of dehydration in their practical applications. Here, we report the distinctive anisotropic dehydration modality of dynamic hydrogels, which is fundamentally different from the more commonly observed isotropic dehydration of covalent hydrogels. Xerogels derived from dynamic hydrogel dehydration will fully cover a curved substrate surface and exhibit hollow structures with internal knots, in contrast to the bulk xerogels produced by covalent hydrogel dehydration. Depending on the competing cohesion of polymer chains and the adhesion at the hydrogel-substrate interface, the previously overlooked reorganization of polymer networks within dynamic hydrogels, triggered by dehydration-induced stress, has been discovered to regulate such macroscopic structural reconstruction for dynamic hydrogel dehydration. With the attached hydrogel-substrate interface, the surface microstructures of substrates can also be engraved onto xerogels with high resolution and on a large scale. This work will greatly enhance our understanding of the soft matter dehydration process and broaden the applications of dehydration technologies using water-containing materials.

Structure, mechanical and adhesive properties of the cellulosic mucilage in Ocimum basilicum seeds

Plant seeds and fruits, like those of Ocimum basilicum, develop a mucilaginous envelope rich in pectins and cellulosic fibers upon hydration. This envelope promotes adhesion for attachment to soils and other substrates for dispersal and protection of the seed for a safe germination. Initially at hydration, the mucilage envelope demonstrates low adhesion and friction, but shows increasing adhesive and frictional properties during dehydration. However, the mechanisms underlying the cellulose fiber arrangement and the mechanical properties, especially the elasticity modulus of the mucilage envelope at different hydration conditions are not fully known. In this study, which is based on scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM) and light microscopy, the structure of the seed coat and arrangement of the cellulose fibers of basil seeds were characterized. Moreover, we performed pull-off force measurements to estimate adhesive properties and JKR-tests to estimate E-modulus of the mucilage at different hydration levels. Microscopy results demonstrate that cellulose fibers are split at their free ends into smaller fibrils, which might enhance the adhesive properties of the mucilage. Adhesive forces in contact increased during dehydration and reached maximum of 33 mN shortly before complete dehydration. The E-modulus of the mucilage changed from 1.4 KPa in water to up to 2.1 MPa in the mucilage at the maximum of its adhesion performance. Obtained results showed hydrogel-like mechanical properties during dehydration and cellulose fiber structures similar to the nanofibrous systems in other organisms with strong adhesive properties. STATEMENT OF SIGNIFICANCE: This paper reveals the hierarchical cellulose fiber structure in Ocimum basilicum's mucilaginous seed coat, suggesting increased fiber splitting towards the end, potentially enhancing adhesion contact areas. Mechanical tests explore elasticity modulus and adhesion force during various hydration stages, crucial as these properties evolve with mucilage desiccation. A rare focus on mucilaginous seed coat mechanical properties, particularly cellulose-reinforced fibers, provides insight into the hydrogel-like mucilage of plant seeds. Adhesion forces peak just before complete desiccation and then decline rapidly. As mucilage water content decreases, the E-modulus rises, displaying hydrogel-like properties during early dehydration stages with higher water content. This study might bring the focus to plant seeds as inspiration for biodegradable glues and applications for hydrogel research.

A strategy for tough and fatigue-resistant hydrogels via loose cross-linking and dense dehydration-induced entanglements

Outstanding overall mechanical properties are essential for the successful utilization of hydrogels in advanced applications such as human-machine interfaces and soft robotics. However, conventional hydrogels suffer from fracture toughness-stiffness conflict and fatigue threshold-stiffness conflict, limiting their applicability. Simultaneously enhancing the fracture toughness, fatigue threshold, and stiffness of hydrogels, especially within a homogeneous single network structure, has proven to be a formidable challenge. In this work, we overcome this challenge through the design of a loosely cross-linked hydrogel with slight dehydration. Experimental results reveal that the slightly-dehydrated, loosely cross-linked polyacrylamide hydrogel, with an original/current water content of 87%/70%, exhibits improved mechanical properties, which is primarily attributed to the synergy between the long-chain structure and the dense dehydration-induced entanglements. Importantly, the creation of these microstructures does not require intricate design or processing. This simple approach holds significant potential for hydrogel applications where excellent anti-fracture and fatigue-resistant properties are necessary.

Injectable thermogel constructed from self-assembled polyurethane micelle networks for 3D cell culture and wound treatment

Injectable hydrogels have attracted significant interest in the biomedical field due to their minimal invasiveness and accommodation of intricate scenes. Herein, we developed an injectable polyurethane-based thermogel platform by modulating the hydrophilic-hydrophobic balance of the segmented components with pendant PEG. The thermogelling behavior is achieved by a combination of the bridging from the hydrophilic PEG and the percolated network from the hydrophobic micelle core. Firstly, the thermogelation mechanism of this system was demonstrated by both DPD simulation and experimental investigation. The gelling temperature could be modulated by varying the solid content, the component of soft segments, and the length of the pendant PEG. We further applied 3D printing technology to prepare personalized hydrogel structures. This integration highlights the adaptability of our thermogel for fabricating complex and patient-specific constructs, presenting a significant advance in the field of regenerative medicine and tissue engineering. Subsequently, in vitro cell experiments demonstrated that the thermogel had good cell compatibility and could promote the proliferation and migration of L929 cells. Impressively, A549 cells could be expediently in situ parceled in the thermogel for three-dimensional cultivation and gain lifeful 3D cell spheres after 7 days. Further, in vivo experiments demonstrated that the thermogel could promote wound healing with the regeneration of capillaries and hair follicles. Ultimately, our study demonstrates the potential of hydrogels to prepare personalized hydrogel structures via 3D printing technology, offering innovative solutions for complex biomedical applications. This work not only provides a fresh perspective for the design of injectable thermogels but also offers a promising avenue to develop thermoresponsive waterborne polyurethane for various medical applications.

Characterization of two different alginate-based bioinks and the influence of melanoma growth within

Extrusion-based bioprinting is an established method in biofabrication. Suitable bioinks have fundamentally different compositions and characteristics, which should be examined, in order to find a perfect model system. Here, we investigate the effect of two alginate-based, yet unalike 3D-printed bioinks, pre-crosslinked alginate-dialdehyde gelatin (ADA-GEL) and a mixture of alginate, hyaluronic acid, and gelatin (Alg/HA/Gel), on the melanoma cell line Mel Im and vice versa in terms of stiffness, shrinkage, cellular behavior and colony formation over 15 days. Rheological stiffness measurements revealed two soft gels with similar storage moduli. The cells did not have a significant impact on the overall stiffness, whereas ADA-GEL (2.5/2.5%) was significantly stiffer than Alg/HA/Gel (0.5/0.1/3%). Regarding the shrinkage of printed constructs, cells had a significant influence, especially in ADA-GEL, which has covalent bonds between the oxidized alginate and gelatin. Multi-photon microscopy exhibited proliferation, cell spreading and migration in ADA-GEL with cell-cell and cell-matrix interaction, dissimilarly to Alg/HA/Gel, in which cells formed spherical, encapsulated colonies. Scanning electron microscopy and histology showed degradation and multi-layered growth on ADA-GEL and fewer examples of escaped cells on Alg/HA/Gel. Both gels serve as proliferation bioink for melanoma with more necrosis in deeper Alg/HA/Gel colonies and differences in spreading and matrix interaction. These findings show the importance of proper characterization of the bioinks for different applications.

Dehydration-Toughing Dual-Solvent Gels with Viscoelastic Transition for Infectious Wound Treatment

The modulus of traditional biomedical hydrogels increases exponentially meditated by dehydration-stiffing mechanism, which leads to the failure of interface matching between hydrogels and soft tissue wounds. It is found in the study that the dual-solvent gels exhibit dehydration-toughening mechanism with the slowly increasing modulus that are always match the soft tissue wounds. Therefore, dual-solvent glycerol hydrogels (GCFen-gly DGHs) are prepared with hydrophobically modified catechol chitosan (hmCSC) and gelatin based on the supramolecular interactions. GCFen-gly DGHs exhibit excellent water retention capacity with a total solvent content exceeding 80%, permanent skin-like modulus within a range of 0.45 to 4.13 kPa, and stable photothermal antibacterial abilities against S, aureus, E. coli, as well as MRSA. Infectious full-thickness rat skin defect model and tissue section analysis indicate that GCFen-gly DGHs are able to accelerate infectious wound healing by alleviating the inflammatory response, promoting granulation tissue growth, re-epithelialization, collagen deposition, and vascular regeneration. As a result, GCFen-gly DGHs is expected to become the next-generation biological gel materials for infectious wound treatment.

The influence of viscosity of hydrogels on the spreading and migration of cells in 3D bioprinted skin cancer models

Various in vitro three-dimensional (3D) tissue culture models of human and diseased skin exist. Nevertheless, there is still room for the development and improvement of 3D bioprinted skin cancer models. The need for reproducible bioprinting methods, cell samples, biomaterial inks, and bioinks is becoming increasingly important. The influence of the viscosity of hydrogels on the spreading and migration of most types of cancer cells is well studied. There are however limited studies on the influence of viscosity on the spreading and migration of cells in 3D bioprinted skin cancer models. In this review, we will outline the importance of studying the various types of skin cancers by using 3D cell culture models. We will provide an overview of the advantages and disadvantages of the various 3D bioprinting technologies. We will emphasize how the viscosity of hydrogels relates to the spreading and migration of cancer cells. Lastly, we will give an overview of the specific studies on cell migration and spreading in 3D bioprinted skin cancer models.

Self-healing, environmentally stable and adhesive hydrogel sensor with conductive cellulose nanocrystals for motion monitoring and character recognition

Conductive hydrogel-based sensors offer diverse applications in artificial intelligence, wearable electronic devices and character recognition management. However, it remains a significant challenge to maintain their satisfactory performances under extreme climatic conditions. Herein, a stretchable, self-adhesive, self-healing and environmentally stable conductive hydrogel was developed through free radical polymerization of hydroxyethyl acrylate (HEA) and poly(ethylene glycol) methacrylate (PEG) as the skeleton, followed by the incorporation of polyaniline-coated cellulose nanocrystal (CNC@PANI) as the conductive and reinforced nanofiller. Encouragingly, the as-prepared hydrogel (CHP) exhibited decent mechanical strength, satisfactory self-adhesion, prominent self-healing property (95.04 % after 60 s), excellent anti-freezing performance (below -60 °C) and outstanding moisture retention. The assembled sensor derived from CHP hydrogel possessed a low detection limit (0.5 % strain), high strain sensitivity (GF = 1.68) and fast response time (96 ms). Remarkably, even in harsh environmental temperatures from -60 °C to 80 °C, it reliably detected subtle and large-scale human motion for a long-term process (>10,000 cycles), manifesting its exceptional environmental tolerance. More interestingly, this hydrogel-based sensor could be assembled into a "writing board" for accurate handwritten numeral recognition. Therefore, the as-obtained multifunctional hydrogel could be a promising material applied in human motion detection and character recognition platforms even in harsh surroundings.

Using chitosan nanofibers to simultaneously improve the toughness and sensing performance of chitosan-based ionic conductive hydrogels

Conductive hydrogels, especially polysaccharide-based ionic conductive hydrogels, have received increasing interest in the field of wearable sensors due to their similarity to human skin. Nevertheless, it is still a challenging task to simultaneously prepare a self-healed and adhesive conductive hydrogel with good toughness, temperature tolerance and high sensing performance, especially with high sensitivity and a low detection limit. Herein, we developed a new strategy to improve the toughness and sensing performance of a multifunctional conductive hydrogel by simultaneously using dissolved chitosan (CS) and solid chitosan nanofibers (CSFs) to induce the formation of hierarchical polymeric networks in the hydrogel. The tensile strength and elongation at break of the hydrogel could be improved from 70.3 kPa and 1005 % to 173.9 kPa and 1477 %, respectively, simply by introducing CSFs to the hydrogel, and its self-healing, adhesive and antibacterial properties were effectively retained. When serving as a resistive sensing material, the introduction of CSFs increased the gauge factor of the hydrogel-based strain sensor from 8.25 to 14.27. Moreover, the hydrogel-based strain sensor showed an ultralow detection limit of 0.2 %, excellent durability and stability (1000 cycles) and could be used to detect various human activities. In addition, the hydrogel prepared by using a water-glycerol binary solvent system showed temperature-tolerant performance and possessed adequate sensitivity when serving as a resistive sensing material. Therefore, this work provides a new way to prepare multifunctional conductive hydrogels with good toughness, sensing performance and temperature tolerance to expand the application range of hydrogel-based strain sensors.

Using chitosan nanofibers to synergistically construct a highly stretchable multi-functional liquid mental-based hydrogel for assembling strain sensor with high sensitivity and broad working range

Liquid metal (LM) microdroplets have garnered significant interest as conductive materials for initiating free radical polymerization in the development of conductive hydrogels suited for strain sensors. However, crafting multi-functional conductive hydrogels that boast both high stretchability and superior sensing capabilities remains as a challenge. In this study, we have successfully synthesized LM-based conductive hydrogels characterized by remarkable stretchability and sensing performance employing acrylic acid (AA) to evenly distribute chitosan nanofibers (CSFs) and to subsequently catalyze the free radical polymerization of AA. The resultant polymer network was crosslinked within situ polyacrylic acid (PAA), facilitated by Ga3+ in conjunction with guar gum (GG)-stabilized Ga droplets. The strategic interplay between the rigid, and protonated CSFs and the pliable PAA matrix, coupled with the ionic crosslinking of Ga3+, endows the resulting GG-Ga-CSF-PAA hydrogel with high stretchability (3700 %), ultrafast self-healing, robust moldability, and strong adhesiveness. When deployed as a strain sensing material, this hydrogel exhibits a high gauge factor (38.8), a minimal detection threshold, enduring durability, and a broad operational range. This versatility enables the hydrogel-based strain sensor to monitor a wide spectrum of human motions. Remarkably, the hydrogel maintains its stretchability and sensing efficacy under extreme temperatures after a simple glycerol solution treatment.

Characterization of drying-induced changes in moduli and internal stresses in a constrained gel using laser vibrometry

Hydrogels, water-saturated polymer networks find widespread use in soft robotics, biomedical, pharmaceutical and food industries. Both solid and water constituents of hydrogels are sensitive to external stimuli such as temperature, humidity, osmolarity, and light. For instance, common hydrogels swell or shrink in the presence of chemical potential gradient between the sample and surrounding environment. Corresponding changes in internal water content lead to significant changes in mechanical properties of hydrogels. Besides, internal stresses build up if the gel samples are constrained during swelling or dehydration. In the present research, we utilize modal analyses technique on drying hydrogels to identify dehydration-induced changes in elastic moduli and internal stresses. In particular, natural frequencies and damping ratios of the first two axisymmetric transverse vibration modes are measured on clamped gelatin disks using non-contact laser vibrometry at various water loss states. Experimental modal frequencies are then compared to the predictions of a pre-stressed thick plate model. The evolutions of elastic moduli and internal stresses for water losses up to 80% are identified. The broadband loss capacity of gelatin is also determined from the measured modal damping ratios. Highly transient mechanical response observed on the gelatin disks further demonstrates the need for non-contact and rapid mechanical characterization of hydrogels. As illustrated in this work, vibration and wave-based techniques are promising candidates to fulfill that need.

The Preparation of Silver and Gold Nanoparticles in Hyaluronic Acid and the Influence of Low-Pressure Plasma Treatment on Their Physicochemical and Microbiological Properties

Nanometals constitute a rapidly growing area of research within nanotechnology. Nanosilver and nanogold exhibit significant antimicrobial, antifungal, antiviral, anti-inflammatory, anti-angiogenic, and anticancer properties. The size and shape of nanoparticles are critical for determining their antimicrobial activity. In this study, silver and gold nanoparticles were synthesized within a hyaluronic acid matrix utilizing distilled water and distilled water treated with low-pressure, low-temperature glow plasma in an environment of air and argon. Electron microscopy, UV-Vis and FTIR spectra, water, and mechanical measurements were conducted to investigate the properties of nanometallic composites. This study also examined their microbiological properties. This study demonstrated that the properties of the composites differed depending on the preparation conditions, encompassing physicochemical and microbiological properties. The application of plasma-treated water under both air and argon had a significant effect on the size and distribution of nanometals. Silver nanoparticles were obtained between the range of 5 to 25 nm, while gold nanoparticles varied between 10 to 35 nm. The results indicate that the conditions under which silver and gold nanoparticles are produced have a significant effect on their mechanical and antibacterial properties.

Establishing a Corrugated Carbon Network with a Crack Structure in a Hydrogel for Improving Sensing Performance

Electronic conductive hydrogels have prompted immense research interest as flexible sensing materials. However, establishing a continuous electronic conductive network within a hydrogel is still highly challenging. Herein, we develop a new strategy to establish a continuous corrugated carbon network within a hydrogel by embedding carbonized crepe paper into the hydrogel with its corrugations perpendicular to the stretching direction using a casting technique. The corrugated carbon network within the as-prepared composite hydrogel serves as a rigid conductive network to simultaneously improve the tensile strength and conductivity of the composite hydrogel. The composite hydrogel also generates a crack structure when it is stretched, enabling the composite hydrogel to show ultrahigh sensitivity (gauge factor = 59.7 and 114 at strain ranges of 0-60 and 60-100%, respectively). The composite hydrogel also shows an ultralow detection limit of 0.1%, an ultrafast response/recovery time of 75/95 ms, and good stability and durability (5000 cycles at 10% strain) when used as a resistive strain sensing material. Moreover, the good stretchability, adhesiveness, and self-healing ability of the hydrogel were also effectively retained after the corrugated carbon network was introduced into the hydrogel. Because of its outstanding sensing performance, the composite hydrogel has potential applications in sensing various human activities, including accurately recording subtle variations in wrist pulse waves and small-/large-scale complex human activities. Our work provides a new approach to develop economical, environmentally friendly, and reliable electronic conductive hydrogels with ultrahigh sensing performance for the future development of electronic skin and wearable devices.

Effect of molecular helical structure on self-growing and damping of single network κ-carrageenan hydrogel

Molecular helical is ubiquitous in molecular structures, however, the impact of the structure on mechanical properties has yet to be extensively studied. In this study, we synthesized a single network κ-carrageenan (KC) hydrogel with the molecular double helix structure, and elucidated its unique self-enhancing and damping properties from a molecular structural perspective. During cycle tensile tests, the helical structure was stretched and entangled to form a directional arrangement, increasing the elastic modulus and achieving 'self-reinforcement'. Meanwhile, the molecular helices have a spring-like damping effect, allowing the hydrogel to dampen low-frequency noise while transmitting high-frequency signals. By utilizing the hydrogel to create electrodes for electrocardiogram (ECG) detection, we were able to effectively filter out noise generated by movements while retaining necessary signals. Our work thus presents a potential pathway bridging from microscopic molecular structure to macroscopic mechanical properties of materials.

Statistical field theory for nonlinear elasticity of polymer networks with excluded volume interactions

Polymer networks formed by cross linking flexible polymer chains are ubiquitous in many natural and synthetic soft-matter systems. Current micromechanics models generally do not account for excluded volume interactions except, for instance, through imposing a phenomenological incompressibility constraint at the continuum scale. This work aims to examine the role of excluded volume interactions on the mechanical response. The approach is based on the framework of the self-consistent statistical field theory of polymers, which provides an efficient mesoscale approach that enables the accounting of excluded volume effects without the expense of large-scale molecular modeling. A mesoscale representative volume element is populated with multiple interacting chains, and the macroscale nonlinear elastic deformation is imposed by mapping the end-to-end vectors of the chains by this deformation. In the absence of excluded volume interactions, it recovers the closed-form results of the classical theory of rubber elasticity. With excluded volume interactions, the model is solved numerically in three dimensions using a finite element method to obtain the energy, stresses, and linearized moduli under imposed macroscale deformation. Highlights of the numerical study include: (i) the linearized Poisson's ratio is very close to the incompressible limit without a phenomenological imposition of incompressibility; (ii) despite the harmonic Gaussian chain as a starting point, there is an emergent strain-softening and strain-stiffening response that is characteristic of real polymer networks, driven by the interplay between the entropy and the excluded volume interactions; and (iii) the emergence of a deformation-sensitive localization instability at large excluded volumes.

A constitutive theory for large stretch behaviors of slide-ring gels by considering molecular frictions

Synthetic slide-ring hydrogels display excellent mechanical properties, including high extensibility, low viscosity, high toughness, etc. Here, by considering molecular frictions induced by sliding of rings on polymer chains, we have developed a nonaffine constitutive theory for large stretch behaviors of these hydrogels. In the theory, a represented volume element of a cube is employed with one chain aligning along each cubic edge, similar to the classical 3-chain model. Different from the classical 3-chain model, crosslinks at each corner of the cube are now mobile due to ring sliding so that contour lengths of chains within the cube would adapt upon loading. Based on the virtual work principle at each time step, the stress-stretch relationship is then obtained using an explicit method. With the theory, we predict viscoelastic behaviors of several slide-ring hydrogels, which are in agreement with experiments. Our analysis clearly indicates that sliding of rings is critical for their high fracture energy. Our analysis also suggests that the molecular friction coefficient for ring sliding on chains can be very small at small stretching but large at large stretch, which might strongly depend on the normal force occurring at the interface between rings and polymer chains. This work provides insights into the understanding of the high mechanical performance of slide-ring hydrogels.