Titanium nitride meta-biosensors targeting extracellular vesicles for high-sensitivity prostate cancer detection

Disposable plasmonic metasurfaces with high biosensing performance are urgently sought for clinical label-free detection. Low-cost aluminum (Al) and titanium nitride (TiN) offer promising alternatives to noble metals for constructing these metasurfaces. However, Al suffers from limited chemical stability, and TiN exhibits weak plasmonic effects, both of which hinder their application in meta-biosensing. Here we integrate their complementary advantages and propose the TiN/Al meta-biosensors. They not only empower the unique near-field enhancement for sensing by TiN/Al hybrid plasmonic modes, but also construct a robust TiN armor against external wear, heat, moisture and corrosion during the bio-detection process. Compared to traditional gold-based counterparts, our meta-biosensors offer superior optical sensitivity at a much lower cost and with fewer pretreatment steps. The excellent biosensing performance facilitates the development of a high-throughput detection system for serum small extracellular vesicles (sEVs), aiding in the diagnosis and follow-up of prostate cancer. The sEVs meta-biosensing demonstrates a diagnostic sensitivity of 100% for significantly distinguishing early cancer, breaking through the conventional testing limitation. Moreover, it doubles the prediction accuracy of cancer recurrence risk following surgery. Our research highlights the potential for large-scale development of powerful meta-biosensors based on non-noble materials, opening up significant opportunities in cancer diagnosis and prognosis.

Harnessing chirality in plasmonics: from synthesis to cutting-edge applications

Nanomaterials composed of noble metals such as gold and silver, commonly known as plasmonic materials, exhibit localized surface plasmon resonance (LSPR). LSPR significantly enhances the electric field strength, thereby influencing the optical properties, for instance in surface enhanced Raman spectroscopy (SERS). Recently, chiral nanostructures, nanostructures with broken symmetry, have demonstrated significant potential in various applications, including enantiomer detection and separation, chiral catalysis, and the development of metamaterials. Due to LSPR, these nanostructures can amplify signals such as circular dichroism (CD) and optical rotatory dispersion (ORD), making them valuable in chiroptical applications. This review provides an analysis of the synthesis, properties, and applications of chiral plasmonic nanostructures. The primary synthesis methods discussed include chemical approaches, glancing angle deposition, and focused ion beam deposition, each providing precise control over the chiral properties of the nanostructures. Furthermore, the review explores the applications of these nanostructures, particularly in the detection of biomolecules (chiral sensing), asymmetric catalysis, and the development of advanced optical devices. Lastly, the review explores future directions for the field and highlights potential areas for improvement.

Plasmon-Driven Chemistry

Plasmonic nanomaterials are promising photocatalysts due to their large optical cross sections and facile generation of nanoscale hotspot regions. They have been used to drive a range of photochemical reactions, including H2 dissociation, CO2 reduction, and ammonia synthesis, offering an exciting approach to light-driven chemistry. Deepening our understanding of how energy can be controllably transferred from the plasmonic nanomaterial to proximal reactants should lead to improvements in the efficiency and selectivity in plasmonic photocatalysis. Here we provide a comprehensive overview of plasmonic properties and explore different energy partitioning pathways. We focus on the importance of mapping molecular potential energy landscapes to understand reactivity and describe recent advancements in spectroscopic techniques, such as ultrafast surface-enhanced Raman spectroscopy, electron microscopy, and electrochemistry, that can aid in understanding how plasmonic nanomaterials can be used to shape potential energy surfaces and modify chemical outcomes. Additionally, we explore innovative hybrid plasmonic nanostructures such as antenna-reactor complexes, plasmonic single-atom catalysts, plasmonic picocavities, and chiral plasmonic substrates, all of which show great promise in advancing the field of plasmon-driven chemistry.

Mid-Infrared Photonic Sensors: Exploring Fundamentals, Advanced Materials, and Cutting-Edge Applications

Mid-infrared (MIR) photonic sensors are revolutionizing optical sensing by enabling precise chemical and biological detection through the interrogation of molecules' unique vibrational modes. This review explores the core principles of MIR photonics, emphasizing the light-matter interactions within the 2-20 µm wavelength range. Additionally, it examines innovative sensor architectures, such as integrated photonic platforms and optical fibers, that enhance sensitivity, specificity, and device miniaturization. The discussion extends to groundbreaking applications in environmental monitoring, medical diagnostics, industrial processes, and security, highlighting the transformative impact of these technologies. This comprehensive overview aims to illuminate the current state-of-the-art while inspiring future developments in MIR photonic sensing.

Mid-infrared photodetection with 2D metal halide perovskites at ambient temperature

The detection of mid-infrared (MIR) light is technologically important for applications such as night vision, imaging, sensing, and thermal metrology. Traditional MIR photodetectors either require cryogenic cooling or have sophisticated device structures involving complex nanofabrication. Here, we conceive spectrally tunable MIR detection by using two-dimensional metal halide perovskites (2D-MHPs) as the critical building block. Leveraging the ultralow cross-plane thermal conductivity and strong temperature-dependent excitonic resonances of 2D-MHPs, we demonstrate ambient-temperature, all-optical detection of MIR light with sensitivity down to 1 nanowatt per square micrometer, using plastic substrates. Through the adoption of membrane-based structures and a photonic enhancement strategy unique to our all-optical detection modality, we further improved the sensitivity to sub-10 picowatt-per-square-micrometer levels. The detection covers the mid-wave infrared regime from 2 to 4.5 micrometers and extends to the long-wave infrared wavelength at 10.6 micrometers, with wavelength-independent sensitivity response. Our work opens a pathway to alternative types of solution-processable, long-wavelength thermal detectors for molecular sensing, environmental monitoring, and thermal imaging.

Tunable hybridized plasmons-phonons in a graphene/mica-nanofilm heterostructure

Graphene plasmons exhibit significant potential across diverse fields, including optoelectronics, metamaterials, and biosensing. However, the exposure of all surface atoms in graphene makes it susceptible to surrounding interference, including losses stemming from charged impurity scattering, the dielectric environment, and the substrate roughness. Thus, designing a dielectric environment with a long lifetime and tunability is essential. In this study, we created a van der Waals (vdW) heterostructure with graphene nanoribbons and mica nano-films. Through Fourier-transform infrared spectroscopy, we identified hybrid modes resulting from the interaction between graphene plasmons and mica phonons. By doping and manipulating the structure of graphene, we achieved control over the phonon-plasmon ratio, thereby influencing the characteristics of these modes. Phonon-dominated modes exhibited stable resonant frequencies, whereas plasmon-dominated modes demonstrated continuous tuning from 1140 to 1360 cm-1 in resonance frequency, accompanied by an increase in extinction intensity from 0.1% to 1.2%. Multiple phonon couplings limited frequency modulation, yielding stable resonances unaffected by the gate voltage. Mica substrates offer atomic level flatness, long phonon lifetimes, and dielectric functionality, enabling hybrid modes with high confinement, extended lifetimes (up to 1.9 picoseconds), and a broad frequency range (from 750 cm-1 to 1450 cm-1). These properties make our graphene and mica heterostructure promising for applications in chemical sensing and integrated photonic devices.

Ideal Photothermal Materials Based on Ge Subwavelength Structure

Photothermal materials often prioritize solar absorption while neglecting thermal radiation losses, which diminishes thermal radiation conversion efficiency. This study addresses this gap by introducing a germanium (Ge) subwavelength structure (SWS) designed to optimize both solar absorption and infrared emissivity. Using a self-masked reactive ion etching (RIE) technique, we achieved a peak absorption of 98.8% within the 300 nm to 1800 nm range, with an infrared emissivity as low as 0.32. Under solar illumination of 1000 W/m2, the structure's temperature increased by 50 °C, generating a heating power of 800 W/m2. Additionally, it demonstrated good mechanical and thermal stability at high temperatures and possessed a hydrophobic angle of 132°, ensuring effective self-cleaning. These characteristics make the Ge SWS suitable for application in solar panels, displays, sensors, and other optoelectronic devices.

Engineering Carrier Density and Effective Mass of Plasmonic TiN Films by Tailoring Nitrogen Vacancies

The introduction of nitrogen vacancies has been shown to be an effective way to tune the plasmonic properties of refractory titanium nitrides. However, its underlying mechanism remains debated due to the lack of high-quality single-crystalline samples and a deep understanding of electronic properties. Here, a series of epitaxial titanium nitride films with varying nitrogen vacancy concentrations (TiNx) were synthesized. Spectroscopic ellipsometry measurements revealed that the plasmon energy could be tuned from 2.64 eV in stoichiometric TiN to 3.38 eV in substoichiometric TiNx. Our comprehensive analysis of electrical and plasmonic properties showed that both the increased electronic states around the Fermi level and the decreased carrier effective mass due to the modified electronic band structures are responsible for tuning the plasmonic properties of TiNx. Our findings offer a deeper understanding of the tunable plasmonic properties in epitaxial TiNx films and are beneficial for the development of nitride plasmonic devices.

Mechanistic Study of the Electrochemical Reduction of CO2 in Aprotic Ionic Liquid in Air

The capture and electrochemical conversion of dilute CO2 in air is a promising approach to mitigate global warming. Aiming to increase the efficiency of the electrochemical reduction of CO2, we fabricated electrodes and developed a custom-designed sealed electrochemical reaction system to study the mechanism of this conversion. The performance of three metal electrodes, Ag, Cu, and SUS 316 L, was compared in an aprotic ionic liquid as the electrolyte to monitor the CO2 concentration and chemical reactions using a CO2 sensor and diffuse reflectance infrared Fourier transform spectroscopy and Raman spectroscopy in CO2/N2 (400 ppm CO2 and 99.96 % N2) or synthetic air (400 ppm CO2, 21 % O2, and 79 % N2). The CO2 concentration decreased at negative potentials and was more drastic in synthetic air than in CO2/N2. At negative potential in synthetic air, IR revealed carbon monoxide, carbonate, or peroxydicarbonate on the Ag, Cu, or SUS 316L electrodes, respectively. Reaction intermediates were identified using Raman spectroscopy. Superoxide (O2⋅-), produced by the reduction of O2 on each electrode, promotes the electrochemical reduction of CO2 whose reduction potential is higher on the negative side than that of O2. This research deepens our understanding of the electrochemical capture/release and conversion of dilute CO2.

Dark-field microscopy studies of single silicon nanoparticles fabricated by e-beam evaporation technique: effect of thermal annealing, polarization of light and deposition parameters

Herein, we report the dark-field microscopy studies on single silicon nanoparticles (SiNPs) fabricated using different deposition parameters in the electron beam evaporation technique. The morphology of the fabricated SiNPs is studied using theAtomic Force Microscope. Later, for the first time, the effect of thermal annealing and deposition parameters (i.e. beam current and deposition time) on the far-field scattering images and spectra of single SiNPs is studied using a transmission-mode dark-field optical microscope to estimate the wavelength locations and full-width at half maxima of the optical resonances of single SiNPs. Finally, the role of polarization of incident light on the optical resonances of single SiNPs is also studied by recording their scattering images and spectra.

Fano resonances induced by strong conductive coupling in cross-shaped metasurfaces for tunable EIT-like phenomena

Highly efficient Metamaterials are necessary for applications in sensing, communication, etc. Fano resonance and electromagnetically induced transparency-like phenomena are essential for obtaining high Q-factor and sensitive Metamaterials. Employing both numerical simulations and experimental analysis, we investigate the emergence of Fano resonance in cross-resonator Metamaterials facilitated by the conductive coupling between dark and bright resonators. We analyze the gradual shift of the fano resonance by tuning the dark resonator and finally form an electromagnetically induced transparency-like transmission peak. The strong coupling of the resonator is observed in the form of an anti-crossing and discussed through analytical models. We demonstrate that the coupling strength of the dark and bright resonance in our metamaterial is proportional to the asymmetry parameter, albeit at the cost of the Fano resonance's Q-factor. The findings and methods introduced in this study can be used to develop highly efficient THz Metamaterials for various applications operable in room conditions.

High-Power Impulse Magnetron Sputter Deposition of Ag on Self-Assembled Au Nanoparticle Arrays at Low-Temperature Dewetting Conditions

Plasmons have facilitated diverse analytical applications due to the boosting signal detectability by hot spots. In practical applications, it is crucial to fabricate straightforward, large-scale, and reproducible plasmonic substrates. Dewetting treatment, via applying direct thermal annealing of metal films, has been used as a straightforward method in the fabrication of such plasmonic nanostructures. However, tailoring the evolution of the dewetting process of metal films poses considerable experimental complexities, mainly due to nanoscale structure formation. Here, we use grazing-incidence small- and wide-angle X-ray scattering for the in situ investigation of the high-power impulse magnetron sputter deposition of Ag on self-assembled Au nanoparticle arrays at low-temperature dewetting conditions. This approach allows us to examine both the direct formation of binary Au/Ag nanostructure and the consequential impact of the dewetting process on the spatial arrangement of the bimetallic nanoparticles. It is observed that the dewetting at 100 °C is sufficient to favor the establishment of a homogenized structural configuration of bimetallic nanostructures, which is beneficial for localized surface plasmon resonances (LSPRs). The fabricated metal nanostructures show potential application for the surface-enhanced Raman scattering (SERS) detection of rhodamine 6G molecules. As SERS platform, bimetallic nanostructures formed with dewetting conditions turn out to be superior to those without dewetting conditions. The method in this work is envisioned as a facile strategy for the fabrication of plasmonic nanostructures.

Self-Assembled TiN-Metal Nanocomposites Integrated on Flexible Mica Substrates towards Flexible Devices

The integration of nanocomposite thin films with combined multifunctionalities on flexible substrates is desired for flexible device design and applications. For example, combined plasmonic and magnetic properties could lead to unique optical switchable magnetic devices and sensors. In this work, a multiphase TiN-Au-Ni nanocomposite system with core-shell-like Au-Ni nanopillars embedded in a TiN matrix has been demonstrated on flexible mica substrates. The three-phase nanocomposite film has been compared with its single metal nanocomposite counterparts, i.e., TiN-Au and TiN-Ni. Magnetic measurement results suggest that both TiN-Au-Ni/mica and TiN-Ni/mica present room-temperature ferromagnetic property. Tunable plasmonic property has been achieved by varying the metallic component of the nanocomposite films. The cyclic bending test was performed to verify the property reliability of the flexible nanocomposite thin films upon bending. This work opens a new path for integrating complex nitride-based nanocomposite designs on mica towards multifunctional flexible nanodevice applications.

Nanomechanical inhomogeneities in CVA-deposited titanium nitride thin films: Nanoindentation and finite element method investigations

Refractory metals that can withstand at high temperatures and harsh conditions are of utmost importance for solar-thermal and energy storage applications. Thin films of TiN have been deposited using cathodic vacuum arc deposition at relatively low temperatures ∼300 °C using the substrate bias ∼ -60 V. The nanomechanical properties of these films were investigated using nanoindentation and the spatial fluctuations were observed. The nanoindentation results were simulated using finite element method through Johnson-Cook model. A parametric study was conducted, and 16 different models were simulated to predict the hardening modulus, hardening exponent, and yield stress of the deposited film. The predicted values of elastic modulus, yield stress, hardening modulus and hardening exponent as 246 GPa, 2500 MPa, 25000 MPa and 0.1 respectively are found to satisfactorily explain the experimental load-indentation curves. We have found the local nitridation plays an important role on nanomechanical properties of TiN thin films and confirms that the nitrogen deficient regions are ductile with low yield stress and hardening modulus. This study further opens the opportunities of modelling the nanoscale system using FEM analysis.

Nonreciprocal Topological Phonon Transfer Independent of Both Device Mass and Exceptional-Point Encircling Direction

Imposing topological operations encircling an exceptional point (EP) engenders unconventional one-way topological phonon transfer (TPT), strictly depending on the direction of EP-inclusive control loops and inherently limited to the small-mass regime of practical resonators. We here show how to beat these limitations and predict a mass-free unidirectional TPT by combining topological operations with the Fizeau light-dragging effect, which splits countercirculating optical modes. An efficient TPT happens when light enters from one chosen side of the fiber but not from the other, leading to a unique nonreciprocal TPT, independent of the direction of winding around the EP. Unlike previous proposals naturally sensitive to both mass and quality of quantum devices, our approach is almost immune to these factors. Remarkably, its threshold duration of adiabatic control loops for maintaining an optimal TPT can be easily shortened, yielding a top-speed-tunable perfect TPT that has no counterpart in previous demonstrations. The study paves a quite-general route to exploiting profoundly different chiral topological effects, independent of both EP-encircling direction and device mass.

Suppressing the radiation loss by hybrid Tamm-surface plasmon BIC modes

Tamm plasmon polaritons (TPPs), localized near the boundary of a dielectric Bragg reflector (DBR) and a thin metal film, have attracted much attention for the lower ohm loss and flexible excitation. However, the radiation loss resulting from the direct coupling to the surroundings hinders their applications. Here, we propose and experimentally demonstrate a new type of hybrid plasmonic quasi-bound state in the continuum (BIC) in a Tamm-surface plasmon polariton system to suppress the radiation loss. Leveraging the scattering of the periodic metal array, the TPP interacts with the surface plasmon polariton (SPP) mode and form a Friedrich-Wintgen type quasi-BIC state that originated from the interference of two surface waves with different natures. Through angle resolved reflectance spectrum measurement, the hybrid plasmonic quasi-BIC was observed in the experiment. Our work proposes a new method to design a high Q mode in plasmonic systems, and thus holds promise for applications in the field of light matter interactions.

Arrayed electro-optic modulators for novel WDM multiplexing

In this paper, a novel silicon-on-chip integrated 4 × 1 wavelength division multiplexing (WDM) multiplexer has been developed. This is the first time that the multiplexer design incorporates arrayed electro-optical modulators with crosstalk cancellation. The design utilizes two types of electro-optic modulators in each channel. The first modulator, based on 1D-PhCNBC, extracts the desired wavelengths from the WDM spectrum. The second modulator, based on coupled hybrid plasmonics, acts as a switch to eliminate crosstalk of the desired optic wavelength signal at the multiplexer output. By combining the advantages of electro-optical modulators and crosstalk cancellation techniques, we anticipate that our proposed design contributes to the advancement of WDM multiplexing technology and facilitates the implementation of efficient and compact optical communication systems. Additionally, this synergy enables enhanced performance, reduced signal interference, and improved signal quality, leading to more reliable and high-speed data transmission in optical networks. The functionality of the device is theoretically simulated using 3D-FDTD (Finite-Difference Time-Domain) method.

Wavelength selective beam-steering in a dual-mode multi-layer plasmonic laser

Due to its improved localization and confinement of light in single or multiple wavelength modes, nanolasers based on plasmonic crystals have grown in popularity in recent years. However, the lasing modes are not spatially separated, making applying different modes to different applications difficult. This work demonstrates an effective technique for spatially separating the two modes of a merged lattice metal nanohole array-based dual-mode plasmonic laser. A flat dielectric metasurface-based beam-splitter that exploits phase gradient profiles on the interfaces has been added to the laser to separate the modes into distinct spatial beams. The proposed structure successfully separates two modes by ∼23°, and the separation can be raised to ∼63° by tuning structural parameters such as the radius of the nanocylinders and the number of supercell rows. In addition, multiple beams can be generated, allowing for manual beam steering. This approach has a high emission output with a narrow linewidth, clarity, and a substantial degree of future tunability potential. The proposed integrated structure will provide a novel means of device miniaturization and may also serve advanced optical applications such as optical communication, quantum optics, interferometry, spectroscopy, and light detection and ranging (LiDAR).

Plasmonic nanosensor and pressure-induced transparency based on coupled resonator in a nanoscale system

Plasmonic nanosensors and the dynamic control of light fields are of the utmost significance in the field of micro- and nano-optics. Here, our study successfully demonstrates a plasmonic nanosensor in a compact coupled resonator system and obtains the pressure-induced transparency phenomenon for the first time to our knowledge. The proposed structure consists of a groove and slot cavity coupled in the metal-insulator-metal waveguide, whose mechanical and optical characteristics are investigated in detail using the finite element method. Simulation results show that we construct a quantitative relationship among the resonator deformation quantity, the applied pressure variation, and the resonant wavelength offset by combining the mechanical and optical properties of the proposed system. The physical features contribute to highly efficient plasmonic nanosensors for refractive index and optical pressure sensing with sensitivity of 1800 nm/RIU and 7.4 nm/MPa, respectively. Furthermore, the light waves are coupled to each other in the resonators, which are detuned due to the presence of pressure, resulting in the pressure-induced transparency phenomenon. It is noteworthy to emphasize that, unlike previously published works, our numerical results take structural deformation-induced changes in optical properties into account, making them trustworthy and practical. The proposed structure introduces a novel, to the best of our knowledge, approach for the dynamic control of light fields and has special properties that can be utilized for the realization of various integrated components.

Tuning the plasmonic resonance in TiN refractory metal

Plasmonic coatings can absorb electromagnetic radiation from visible to far-infrared spectrum for the better performance of solar panels and energy saving smart windows. For these applications, it is important for these coatings to be as thin as possible and grown at lower temperatures on arbitrary substrates like glass, silicon, or flexible polymers. Here, we tune and investigate the plasmonic resonance of titanium nitride thin films in lower thicknesses regime varying from ~ 20 to 60 nm. High-quality crystalline thin films of route-mean-square roughness less than ~ 0.5 nm were grown on a glass substrate at temperature of ~ 200 °C with bias voltage of - 60 V using cathodic vacuum arc deposition. A local surface-enhanced-plasmonic-resonance was observed between 400 and 500 nm, which further shows a blueshift in plasmonic frequency in thicker films due to the increase in the carrier mobility. These results were combined with finite-difference-time-domain numerical analysis to understand the role of thicknesses and stoichiometry on the broadening of electromagnetic absorption.

Tuning d-Orbital Electronic Structure via Au-Intercalated Two-Dimensional Fe3GeTe2 to Increase Surface Plasmon Activity

While extensive research has been dedicated to plasmon tuning within non-noble metals, prior investigations primarily concentrated on markedly augmenting the inherently low concentration of free carriers in materials with minimal consideration given to the influence of electron orbitals on surface plasmons. Here, we achieve successful intercalation of Au atoms into the layered structure of Fe3GeTe2 (FGT), thereby exerting control over the orbital electronic states or structure of FGT. This intervention not only amplifies the charge density and electron mobility but also mitigates the loss associated with interband transitions, resulting in increased two-dimensional FGT surface plasmon activity. As a consequence, Au-intercalated FGT detects crystal violet molecules as a surface-enhanced Raman scattering substrate, and the detection lines are 3 orders of magnitude higher than before Au intercalation. Our work provides insight for further studies on plasmon effects and the relation between surface plasmon resonance behavior and electronic structures.

Diffractive optical computing in free space

Structured optical materials create new computing paradigms using photons, with transformative impact on various fields, including machine learning, computer vision, imaging, telecommunications, and sensing. This Perspective sheds light on the potential of free-space optical systems based on engineered surfaces for advancing optical computing. Manipulating light in unprecedented ways, emerging structured surfaces enable all-optical implementation of various mathematical functions and machine learning tasks. Diffractive networks, in particular, bring deep-learning principles into the design and operation of free-space optical systems to create new functionalities. Metasurfaces consisting of deeply subwavelength units are achieving exotic optical responses that provide independent control over different properties of light and can bring major advances in computational throughput and data-transfer bandwidth of free-space optical processors. Unlike integrated photonics-based optoelectronic systems that demand preprocessed inputs, free-space optical processors have direct access to all the optical degrees of freedom that carry information about an input scene/object without needing digital recovery or preprocessing of information. To realize the full potential of free-space optical computing architectures, diffractive surfaces and metasurfaces need to advance symbiotically and co-evolve in their designs, 3D fabrication/integration, cascadability, and computing accuracy to serve the needs of next-generation machine vision, computational imaging, mathematical computing, and telecommunication technologies.

A Quasi-Bound States in the Continuum Dielectric Metasurface-Based Antenna-Reactor Photocatalyst

Metasurfaces are a class of two-dimensional artificial resonators, creating new opportunities for strong light-matter interactions. One type of nonradiative optical metasurface that enables substantial light concentration is based on quasi-Bound States in the Continuum (quasi-BIC). Here we report the design and fabrication of a quasi-BIC dielectric metasurface that serves as an optical frequency antenna for photocatalysis. By depositing Ni nanoparticle reactors onto the metasurface, we create an antenna-reactor photocatalyst, where the virtually lossless metasurface funnels light to drive a chemical reaction. This quasi-BIC-Ni antenna-reactor drives H2 dissociation under resonant illumination, showing strong polarization, wavelength, and optical power dependencies. Both E-field-induced electronic and photothermal heating effects drive the reaction, supported by load-dependent reactivity studies and our theoretical model. This study unlocks new opportunities for photocatalysis that employ dielectric metasurfaces for light harvesting in an antenna-reactor format.

Colloidal Plasmonic TiN Nanoparticles for Efficient Solar Seawater Desalination

Transferring traditional plasmonic noble metal nanomaterials from the laboratory to industrial production has remained challenging due to the high price of noble metals. The development of cost-effective non-noble-metal alternatives with outstanding plasmonic properties has therefore become essential. Herein, we report on the gram-scale production of differently shaped TiN nanoparticles with strong plasmon-enabled broadband light absorption, including differently sized TiN nanospheres, nanobipyramids, and nanorod arrays. The TiN nanospheres and nanobipyramids are further coembedded in highly porous poly(vinyl alcohol) films to function as a photothermal material for solar seawater desalination. A seawater evaporation rate of 3.8 kg m-2 h-1 is achieved, which marks the record performance among all plasmonic solar seawater desalination systems reported so far. The removal percentage of phenol reaches 98.3%, which is attributed to the joint action of the excellent photocatalytic ability and the superhydrophilicity of the porous TiN-based composite film.

Simultaneous Control of Spectral And Directional Emissivity with Gradient Epsilon-Near-Zero InAs Photonic Structures

Controlling both the spectral bandwidth and directionality of emitted thermal radiation is a fundamental challenge in contemporary photonics. Recent work has shown that materials with a spatial gradient in the frequency range of their epsilon-near-zero (ENZ) response can support broad spectrum directionality in their emissivity, enabling high total radiance to specific angles of incidence. However, this capability is limited spectrally and directionally by the availability of materials with phonon-polariton resonances over long-wave infrared wavelengths. Here, an approach is designed and experimentally demonstrated using doped III-V semiconductors that can simultaneously tailor spectral peak, bandwidth, and directionality of infrared emissivity. InAs-based gradient ENZ photonic structures that exhibit broadband directional emission with varying spectral bandwidths and directional ranges as a function of their doping concentration profile and thickness are epitaxially grown and characterized. Due to its easy-to-fabricate geometry, it is believed that this approach provides a versatile photonic platform to dynamically control broadband spectral and directional emissivity for a range of emerging applications in heat transfer and infrared sensing.

Synergistic Effects of Localized Surface Plasmon Resonance, Surface Plasmon Polariton, and Waveguide Plasmonic Resonance on the Same Material: A Promising Hypothesis to Enhance Organic Solar Cell Efficiency

This work explores the utilization of plasmonic resonance (PR) in silver nanowires to enhance the performance of organic solar cells. We investigate the simultaneous effect of localized surface plasmon resonance (LSPR), surface plasmon polariton (SPP), and waveguide plasmonic mode on silver nanowires, which have not been thoroughly explored before. By employing finite-difference time-domain (FDTD) simulations, we analyze the plasmonic resonance behavior of a ZnO/Silver nanowires/ZnO (ZAZ) electrode structure. Our investigations demonstrate the dominance of LSPR, leading to intense electric fields inside the nanowire and their propagation into the surrounding medium. Additionally, we observe the synergistic effects of SPP and waveguide plasmonic mode, contributing to enhanced light absorption within the active layer of the organic solar cell. This leads to an improvement in photovoltaic performance, as demonstrated by our previous work, showing an approximate 20% increase in photocurrent and overall power conversion efficiency of the organic solar cell. The incorporation of metallic nanostructures exhibiting these multiple plasmonic modes opens up new opportunities for improving light absorption and overall device efficiency. Our study highlights the potential of these combined plasmonic effects for the design and optimization of organic solar cells.

Synergetic positivity of loss and noise in nonlinear non-Hermitian resonators

Loss and noise are usually undesirable in electronics and optics, which are generally mitigated by separate ways in the cost of bulkiness and complexity. Recent studies of non-Hermitian systems have shown a positive role of loss in various loss-induced counterintuitive phenomena, while noise still remains a fundamental challenge in non-Hermitian systems particularly for sensing and lasing. Here, we simultaneously reverse the detrimental loss and noise and reveal their coordinated positive role in nonlinear non-Hermitian resonators. This synergetic effect leads to the amplified spectrum intensity with suppressed spectrum fluctuations after adding both loss and noise. We reveal the underlying mechanism of nonlinearity-induced bistability engineered by loss in the non-Hermitian resonators and noise-loss enhanced coherence of eigenfrequency hopping driven by temporal modulation of detuning. Our findings enrich counterintuitive non-Hermitian physics and lead to a general recipe to overcome loss and noise from electronics to photonics with applications from sensing to communication.

Nanostructured surface plasmon resonance sensors: Toward narrow linewidths

Surface plasmon resonance sensors have found wide applications in optical sensing field due to their excellent sensitivity to the slight refractive index change of surrounding medium. However, the intrinsically high optical losses in metals make it nontrivial to obtain narrow resonance spectra, which greatly limits the performance of surface plasmon resonance sensors. This review first introduces the influence factors of plasmon linewidths of metallic nanostructures. Then, various approaches to achieve narrow resonance linewidths are summarized, including the fabrication of nanostructured surface plasmon resonance sensors supporting surface lattice resonance/plasmonic Fano resonance or coupling with a photonic cavity, the preparation of surface plasmon resonance sensors with ultra-narrow resonators, as well as strategies such as platform-induced modification, alternating different dielectric layers, and the coupling with whispering-gallery-modes. Lastly, the applications and some existing challenges of surface plasmon resonance sensors are discussed. This review aims to provide guidance for the further development of nanostructured surface plasmon resonance sensors.

Practical Considerations for Simulating the Plasmonic Properties of Metal Nanoparticles

Simulating the plasmonic properties of colloidally derived metal nanoparticles with accuracy to their experimentally observed measurements is challenging due to the many structural and compositional parameters that influence their scattering and absorption properties. Correlation between single nanoparticle scattering measurements and simulated spectra emphasize these strong structural and compositional relationships, providing insight into the design of plasmonic nanoparticles. This Perspective builds from this history to highlight how the structural features of models used in simulation methods such as those based on the Finite-Difference Time-Domain (FDTD) method and Discrete Dipole Approximation (DDA) are of critical consideration for correlation with experiment and ultimately prediction of new nanoparticle properties. High-level characterizations such as electron tomography are discussed as ways to advance the accuracy of models used in such simulations, allowing the plasmonic properties of structurally complex nanoparticles to be better understood. However, we also note that the field is far from bringing experiment and simulation into agreement for plasmonic nanoparticles with complex compositions, reflecting analytical challenges that inhibit accurate model generation. Potential directions for addressing these challenges are also presented.

Graphene-Based Metamaterial Sensor for Pesticide Trace Detection

Organophosphate insecticides with broad spectrum and high efficiency make a great difference to agricultural production. The correct utilization and residue of pesticides have always been important issues of concern, and residual pesticides can accumulate and pass through the environment and food cycle, resulting in safety and health hazards to humans and animals. In particular, current detection methods are often characterized by complex operations or low sensitivity. Fortunately, using monolayer graphene as the sensing interface, the designed graphene-based metamaterial biosensor working in the 0-1 THz frequency range can achieve highly sensitive detection characterized by spectral amplitude changes. Meanwhile, the proposed biosensor has the advantages of easy operation, low cost, and quick detection. Taking phosalone as an example, its molecules can move the Fermi level of graphene with π-π stacking, and the lowest concentration of detection in this experiment is 0.01 μg/mL. This metamaterial biosensor has great potential in detecting trace pesticides, and its application in food hygiene and medicine can provide better detection services.

Design of infrared optical absorber using silver nanorings array made by a top-down process

This paper presents the numerical simulation and fabrication of a metasurface composed of silver nanorings with a split-ring gap. These nanostructures can exhibit optically-induced magnetic responses with unique possibilities to control absorption at optical frequencies. The absorption coefficient of the silver nanoring was optimized by performing a parametric study with Finite Difference Time Domain (FDTD) simulations. The absorption and scattering cross sections of the nanostructures are numerically calculated to assess the impact of the inner and outer radii, the thickness and the split-ring gap of one nanoring, as well as the periodicity factor for a group of four nanorings. This showed full control on resonance peaks and absorption enhancement in the near infrared spectral range. The experimental fabrication of this metasurface made of an array of silver nanorings is achieved by e-beam lithography and metallization. Optical characterizations are then carried out and compared to the numerical simulations. In contrast to usual microwave split-ring resonator metasurfaces reported in literature, the present study shows both the realization by a top-down process and modelling performed in the infrared frequency range.

Photothermal Nanomaterials: A Powerful Light-to-Heat Converter

All forms of energy follow the law of conservation of energy, by which they can be neither created nor destroyed. Light-to-heat conversion as a traditional yet constantly evolving means of converting light into thermal energy has been of enduring appeal to researchers and the public. With the continuous development of advanced nanotechnologies, a variety of photothermal nanomaterials have been endowed with excellent light harvesting and photothermal conversion capabilities for exploring fascinating and prospective applications. Herein we review the latest progresses on photothermal nanomaterials, with a focus on their underlying mechanisms as powerful light-to-heat converters. We present an extensive catalogue of nanostructured photothermal materials, including metallic/semiconductor structures, carbon materials, organic polymers, and two-dimensional materials. The proper material selection and rational structural design for improving the photothermal performance are then discussed. We also provide a representative overview of the latest techniques for probing photothermally generated heat at the nanoscale. We finally review the recent significant developments of photothermal applications and give a brief outlook on the current challenges and future directions of photothermal nanomaterials.

Crosstalk prohibition at the deep-subwavelength scale by epsilon-near-zero claddings

To prevent the crosstalk between adjacent waveguides in photonic integrated circuits, the minimum thickness of the cladding layers is around half a wavelength, which imposes a fundamental limitation to further integration and miniaturization of photonic circuits. Here, we reveal that epsilon-near-zero claddings, either isotropic or anisotropic, can break the above bottleneck by prohibiting the crosstalk for the modes with magnetic field polarized in the z direction at a deep-subwavelength thickness (e.g., λ 0/30, λ 0 is the free-space wavelength), therefore bestowing ultra-compact waveguide systems. The physical origin of this remarkable effect attributes to the divergent impedance of epsilon-near-zero materials far beyond those of dielectric or epsilon-negative claddings. Through full-wave simulations and microwave experiments, we have verified the effectiveness of the ultrathin epsilon-near-zero cladding in crosstalk prohibition. Our finding reveals the significant impact of impedance difference in waveguide designs and opens a promising route toward ultra-compact photonic chips.

Stepped waveguide metamaterials as low-loss effective replica of surface plasmon polaritons

Surface plasmon polaritons (SPPs) have attracted intensive attention for the unprecedented developments of light-matter interactions in optics and photonics, providing a feasible method for light confinement and transmission at a subwavelength scale. However, SPPs traditionally suffer from large losses due to the intrinsic dissipations and absorptions, which hinder further development and applications of SPPs. Here, we theoretically and experimentally investigate the concept of stepped waveguide metamaterials behaving as low-loss effective replicas of SPPs. The proposed structure without natural plasmonic material maintains the identical field configuration to that in regular SPP but avoids the inherent losses, outperforming regular low-loss SPP design with natural plasmonic materials on SPP propagation lengths. Furthermore, stepped waveguide metamaterial exhibits excellent compatibility in direct interconnections with arbitrary regular SPP and potentially represents a feasible route toward new SPP devices with low-loss advantages.

Narrowband HgCdTe infrared photodetector with integrated plasmonic structure

The application of plasmonic structure has been demonstrated to improve the performance of infrared photodetectors. However, the successful experimental realization of the incorporation of such optical engineering structure into HgCdTe-based photodetectors has rarely been reported. In this paper, we present a HgCdTe infrared photodetector with integrated plasmonic structure. The experimental results show that the device with plasmonic structure has a distinct narrowband effect with a peak response rate close to 2 A/W, which is nearly 34% higher compared with the reference device. The simulation results are in good agreement with the experiment, and an analysis of the effect of the plasmonic structure is given, demonstrating the crucial role of the plasmonic structure in the enhancement of the device performance.

Advances in Meta-Optics and Metasurfaces: Fundamentals and Applications

Meta-optics based on metasurfaces that interact strongly with light has been an active area of research in recent years. The development of meta-optics has always been driven by human's pursuits of the ultimate miniaturization of optical elements, on-demand design and control of light beams, and processing hidden modalities of light. Underpinned by meta-optical physics, meta-optical devices have produced potentially disruptive applications in light manipulation and ultra-light optics. Among them, optical metalens are most fundamental and prominent meta-devices, owing to their powerful abilities in advanced imaging and image processing, and their novel functionalities in light manipulation. This review focuses on recent advances in the fundamentals and applications of the field defined by excavating new optical physics and breaking the limitations of light manipulation. In addition, we have deeply explored the metalenses and metalens-based devices with novel functionalities, and their applications in computational imaging and image processing. We also provide an outlook on this active field in the end.

Recent Advances in Liquid Metal Photonics: Technologies and Applications

Near-room-temperature liquid metals offer unique and crucial advantages over solid metals for a broad range of applications which require soft, stretchable and/or reconfigurable structures and devices. In particular, gallium-based liquid metals are the most suitable for a wide range of applications, not only owing to their low melting points, but also thanks to their low toxicity and negligible vapor pressure. In addition, gallium-based liquid metals exhibit attractive optical properties which make them highly suitable for a variety of photonics applications. This review summarizes the material properties of gallium-based liquid metals, highlights several effective techniques for fabricating liquid-metal-based structures and devices, and then focuses on the various photonics applications of these liquid metals in different spectral regions, following with a discussion on the challenges and opportunities for future research in this relatively nascent field.

Carrier density tuning in CuS nanoparticles and thin films by Zn doping via ion exchange

Copper sulphide (covellite) nanoplatelets have recently emerged as a plasmonic platform in the near-infrared with ultrafast nonlinear optical properties. Here we demonstrate that the free-carrier density in CuS, which is an order of magnitude lower than in traditional plasmonic metals, can be further tuned by chemical doping. Using ion exchange to replace Cu with an increasing content of Zn in the nanoparticles, the free-hole density can be lowered, resulting in a long-wavelength shift of the localised plasmon resonances from 1250 nm to 1750 nm. The proposed approach provides new opportunities for tuning the plasmonic response of covellite nanocrystals as well as the carrier relaxation time which decreases for lower free-carrier densities.

Silent region barcode particle arrays for ultrasensitive multiplexed SERS detection

Suspension arrays are a critical components of next generation multiplexed detection technologies. Current fluorescence suspension arrays are limited by a multiplexed coding ceiling and difficulties with ultrasensitive detection. Raman mode is a promising substitute, but the complex spectral peak distributions and extremely weak intrinsic signal intensity severely diminish Raman signal performance in suspension arrays. To address these limitations, we constructed a Raman suspension array system using plasmonic microbeads as barcode substrates and Au nanoflowers as reporter carriers. The well-designed shell morphology and plasmonic microbead composition enabled significant surface enhancement Raman scattering (SERS) such that we were able to adjust silent region Raman-coding intensity levels. Due to synergistic SERS effects from the plasmonic shell and the multi-branched Au nanoflower nanostructure, the reporting signal was greatly improved, enabling ultrasensitive detection of 5-plexed lung cancer markers. Detection in patient serum samples demonstrated good consistency with the standard electrochemiluminescence method. Thus, this silent region SERS barcode-based suspension array is a developmental advance for modern multiplexed biodetection, potentially providing a powerful early disease screening and diagnosis tool.

Lithium-plasmon-based low-powered dynamic color display

Display and power supply have been two essential and independent cornerstones of modern electronics. Here, we report a lithium-plasmon-based low-powered dynamic color display with intrinsic dual functionality (plasmonic display and energy recycling unit) which is a result of the electric-field-driven transformation of nanostructured lithium metals. Dynamic color displays are enabled by plasmonic transformation through electrodeposition (electrostripping) of lithium metals during the charging (discharging) process, while the consumed energy for coloring can be retrieved in the inverse process respectively. Energy recycling of lithium metals brings energy consumption down to 0.390 mW cm-2 (0.105 mW cm-2) for the active (static) coloration state of a proof-of-concept display/battery device, which approaches nearly-zero-energy-consumption in the near-100%-energy-efficiency limit of commercial lithium batteries. Combining the subwavelength feature of plasmonics with effective energy recycling, the lithium-plasmon-based dynamic display offers a promising route towards next-generation integrated photonic devices, with the intriguing advantages of low energy consumption, a small footprint and high resolution.

Plasmon Resonances in 1D Nanowire Arrays and 3D Nanowire Networks of Topological Insulators and Metals

The 1D nanowire arrays and 3D nanowire networks of topological insulators and metals have been fabricated by template-assisted deposition of Bi₂Te₃ and Ni inside anodic aluminum oxide (AAO) templates, respectively. Despite the different origins of the plasmon capabilities of the two materials, the results indicate that the optical response is determined by plasmon resonances, whose position depends on the nanowire interactions and material properties. Due to the thermoelectric properties of Bi₂Te₃ nanowires, these plasmon resonances could be used to develop new ways of enhancing thermal gradients and their associated thermoelectric power.

ZnO-ferromagnetic metal vertically aligned nanocomposite thin films for magnetic, optical and acoustic metamaterials

Magnetoacoustic waves generated in piezoelectric and ferromagnetic coupled nanocomposite films through magnetically driven surface acoustic waves present great promise of loss-less data transmission. In this work, ferromagnetic metals of Ni, Co and Co x Ni1-x are coupled with a piezoelectric ZnO matrix in a vertically-aligned nanocomposite (VAN) thin film platform. Oxidation was found to occur in the cases of ZnO-Co, forming a ZnO-CoO VAN, while only very minor oxidation was found in the case of ZnO-Ni VAN. An alloy approach of Co x Ni1-x has been explored to overcome the oxidation during growth. Detailed microstructural analysis reveals limited oxidation of both metals and distinct phase separation between the ZnO and the metallic phases. Highly anisotropic properties including anisotropic ferromagnetic properties and hyperbolic dielectric functions are found in the ZnO-Ni and ZnO-Co x Ni1-x systems. The magnetic metal-ZnO-based hybrid metamaterials in this report present great potential in coupling of optical, magnetic, and piezoelectric properties towards future magnetoacoustic wave devices.

All-optical AZO-based modulator topped with Si metasurfaces

All-optical communication systems are under continuous development to address different core elements of inconvenience. Here, we numerically investigate an all-optical modulator, realizing a highly efficient modulation depth of 22 dB and a low insertion loss of 0.32 dB. The tunable optical element of the proposed modulator is a layer of Al-doped Zinc Oxide (AZO), also known as an epsilon-near-zero transparent conductive oxide. Sandwiching the AZO layer between a carefully designed distributed Bragg reflector and a dielectric metasurface-i.e., composed of a two-dimensional periodic array of cubic Si-provides a guided-mode resonance at the OFF state of the modulator, preventing the incident signal reflection at λ = 1310 nm. We demonstrate the required pump fluence for switching between the ON/OFF states of the designed modulator is about a few milli-Joules per cm². The unique properties of the AZO layer, along with the engineered dielectric metasurface above it, change the reflection from 1 to 93%, helping design better experimental configurations for the next-generation all-optical communication systems.

Plasmonic gain in current biased tilted Dirac nodes

Surface plasmons, which allow tight confinement of light, suffer from high intrinsic electronic losses. It has been shown that stimulated emission from excited electrons can transfer energy to plasmons and compensate for the high intrinsic losses. To-date, these realizations have relied on introducing an external gain media coupled to the surface plasmon. Here, we propose that plasmons in two-dimensional materials with closely located electron and hole Fermi pockets can be amplified, when an electrical current bias is applied along the displaced electron-hole pockets, without the need for an external gain media. As a prototypical example, we consider WTe₂ from the family of 1T[Formula: see text]-MX₂ materials, whose electronic structure can be described within a type-II tilted massive Dirac model. We find that the nonlocal plasmonic response experiences prominent gain for experimentally accessible currents on the order of mAμm^-1. Furthermore, the group velocity of the plasmon found from the isofrequency curves imply that the amplified plasmons are highly collimated along a direction perpendicular to the Dirac node tilt when the electrical current is applied along it.

Flexible graphene-based metamaterial sensor for highly sensitive detection of bovine serum albumin

A graphene-based metamaterial sensor working in the terahertz spectrum is proposed, simulated, and experimentally verified by measuring bovine serum albumin (BSA). Flexible, low-cost polyimide (PI) is used as the substrate, and aluminum with periodic square rings is chosen as the metal layer. Furthermore, the introduction of the graphene monolayer interacts with the molecules through π-π stacking, resulting in the highly sensitive detection of BSA by calculating the amplitude changes at the resonance frequency. The sensor, which is a biosensor platform that offers the advantages of a small size, high sensitivity, and easy fabrication, is a promising method for THz biological detection.

Phase-to-pattern inverse design for a fast realization of a functional metasurface by combining a deep neural network and a genetic algorithm

Metasurface provides an unprecedented means to manipulate electromagnetic waves within a two-dimensional planar structure. Traditionally, the design of meta-atom follows the pattern-to-phase paradigm, which requires a time-consuming brute-forcing process. In this work, we present a fast inverse meta-atom design method for the phase-to-pattern mapping by combining the deep neural network (DNN) and genetic algorithm (GA). The trained classification DNN with an accuracy of 92% controls the population generated by the GA within an arbitrary preset small phase range, which could greatly enhance the optimization efficiency with less iterations and a higher accuracy. As proof-of-concept demonstrations, two reflective functional metasurfaces including an orbital angular momentum generator and a metalens have been numerically investigated. The simulated results agree very well with the design goals. In addition, the metalens is also experimentally validated. The proposed method could pave a new avenue for the fast design of the meta-atoms and functional meta-devices.

Electric Field-Controlled Damping Switches of Coupled Dirac Plasmons

For quasiparticle systems, the control of the quasiparticle lifetime is an important goal, determining whether the related fascinating physics can be revealed in fundamental research and utilized in practical applications. Here, we use double-layer graphene with a boron nitride spacer as a model system to demonstrate that the lifetime of coupled Dirac plasmons can be remotely tuned by electric field-controlled damping pathways. Essentially, one of the graphene layers serves as an external damping amplifier whose efficiency can be controlled by the corresponding doping level. Through this damping switch, the damping rate of the plasmon can be actively tuned up to 1.7 fold. This Letter provides a prototype design to actively control the lifetime of graphene plasmons and also broadens our horizon for the damping control of other quasiparticle systems.

Bio-Inspired Nanomembranes as Building Blocks for Nanophotonics, Plasmonics and Metamaterials

Nanomembranes are the most widespread building block of life, as they encompass cell and organelle walls. Their synthetic counterparts can be described as freestanding or free-floating structures thinner than 100 nm, down to monatomic/monomolecular thickness and with giant lateral aspect ratios. The structural confinement to quasi-2D sheets causes a multitude of unexpected and often counterintuitive properties. This has resulted in synthetic nanomembranes transiting from a mere scientific curiosity to a position where novel applications are emerging at an ever-accelerating pace. Among wide fields where their use has proven itself most fruitful are nano-optics and nanophotonics. However, the authors are unaware of a review covering the nanomembrane use in these important fields. Here, we present an attempt to survey the state of the art of nanomembranes in nanophotonics, including photonic crystals, plasmonics, metasurfaces, and nanoantennas, with an accent on some advancements that appeared within the last few years. Unlimited by the Nature toolbox, we can utilize a practically infinite number of available materials and methods and reach numerous properties not met in biological membranes. Thus, nanomembranes in nano-optics can be described as real metastructures, exceeding the known materials and opening pathways to a wide variety of novel functionalities.

Direct Observation of Self-Hybridized Exciton-Polaritons and Their Valley Polarizations in a Bare WS2 Layer

The strong excitonic properties of transition metal dichalcogenides (TMD) have led to the successful demonstration of exciton-polaritons (EPs) in various optical cavity structures. Recently, self-hybridized EPs have been discovered in a bare TMD layer, but experimental investigation is still lacking because of their nonradiative nature. Herein, the direct observation of self-hybridized EPs in a bare multilayer WS₂ via the evanescent field coupling technique is reported. Because of the thickness-dependent Rabi splitting energy, the dispersion curves of the EPs change sensitively with sample thickness. Moreover, continuous tuning of EP dispersion curves is demonstrated by controlling the excitation laser power. Lastly, it is observed that guided EPs retain valley polarization up to 0.2 at room temperature, representing a valley-preserved strong coupling regime. It is believed that the high tunability and valley polarization properties of the guided EPs in bare TMD layers can facilitate new nanophotonic and valleytronic applications.

Infrared plasmons propagate through a hyperbolic nodal metal

Metals are canonical plasmonic media at infrared and optical wavelengths, allowing one to guide and manipulate light at the nanoscale. A special form of optical waveguiding is afforded by highly anisotropic crystals revealing the opposite signs of the dielectric functions along orthogonal directions. These media are classified as hyperbolic and include crystalline insulators, semiconductors, and artificial metamaterials. Layered anisotropic metals are also anticipated to support hyperbolic waveguiding. However, this behavior remains elusive, primarily because interband losses arrest the propagation of infrared modes. Here, we report on the observation of propagating hyperbolic waves in a prototypical layered nodal-line semimetal ZrSiSe. The observed waveguiding originates from polaritonic hybridization between near-infrared light and nodal-line plasmons. Unique nodal electronic structures simultaneously suppress interband loss and boost the plasmonic response, ultimately enabling the propagation of infrared modes through the bulk of the crystal.