COF-based membranes for liquid phase separation: Preparation, mechanism and perspective

Covalent organic frameworks (COFs) are a new kind of crystalline porous materials composed of organic molecules connected by covalent bonds, processes the characteristics of low density, large specific surface area, adjustable pore size and structure, and easy to functionalize, which have been widely used in the field of membrane separation technology. Recently, there are more and more researches focusing on the preparation methods, separation application, and mechanism of COF membranes, which need to be further summarized and compared. In this review, we primarily summarized several conventional preparation methods, such as two-phase interfacial polymerization, in-situ growth on substrate, unidirectional diffusion method, layer-by-layer assembly method, mixed matrix membranes, and so on. The advantages and disadvantages of each method are briefly summarized. The application potential of COF membrane in liquid separation are introduced from four aspects: dyeing wastewater treatment, heavy metal removal, seawater desalination and oil-water separation. Then, the mechanisms including pore structure, hydrophilic/hydrophobic, electrostatic repulsion/attraction and Donnan effect are introduced. For the efficient removal of different kind of pollutions, researchers can select different ligands to construct membranes with specific pore size, hydrophily, salt or organic rejection ability and functional group. The ideas for the design and preparation of COF membranes are introduced. Finally, the future direction and challenges of the next generation of COF membranes in the field of separation are prospected.

Large-Area Ultrathin Metal-Organic Framework Membranes Fabricated on Flexible Polymer Supports for Gas Separations

Ultrathin continuous metal-organic framework (MOF) membranes have the potential to achieve high gas permeance and selectivity simultaneously for otherwise difficult gas separations, but with few exceptions for zeolitic-imidazolate frameworks (ZIF) membranes, current methods cannot conveniently realize practical large-area fabrication. Here, we propose a ligand back diffusion-assisted bipolymer-directed metal ion distribution strategy for preparing large-area ultrathin MOF membranes on flexible polymeric support layers. The bipolymer directs metal ions to form a cross-linked two-dimensional (2D) network with a uniform distribution of metal ions on support layers. Ligand back diffusion controls the feed of ligand molecules available for nuclei formation, resulting in the continuous growth of large-area ultrathin MOF membranes. We report the practical fabrication of three representative defect-free MOF membranes with areas larger than 2,400 cm2 and ultrathin selective layers (50-130 nm), including ZIFs and carboxylate-linker MOFs. Among these, the ZIF-8 membrane displays high gas permeance of 3,979 GPU for C3H6, with good mixed gas selectivity (43.88 for C3H6/C3H8). To illustrate its scale-up practicality, MOF membranes were prepared and incorporated into spiral-wound membrane modules with an active area of 4,800 cm2. The ZIF-8 membrane module presents high gas permeance (3,930 GPU for C3H6) with acceptable ideal gas selectivity (37.45 for C3H6/C3H8).

Crystalline nanosheets of three-dimensional supramolecular frameworks with uniform thickness and high stability

Fabricating three dimensional (3D) supramolecular frameworks (SMFs) into stable crystalline nanosheets remains a great challenge due to the homogeneous and weak inter-building block interactions along 3D directions. Herein, crystalline nanosheets of a 3D SMF with a uniform thickness of 4.8 ± 0.1 nm immobilized with Pt nanocrystals on the surface (Q[8]/Pt NSs) were fabricated via the solid-liquid reaction between cucurbit[8]uril/H2PtCl6 single crystals and hydrazine hydrate with the help of gas and heat yielded during the reaction process. A series of experiments and theoretical calculations reveal the ultrahigh stability of Q[8]/Pt NSs due to the high density hydrogen bonding interaction among neighboring Q[8] molecules. This in turn endows Q[8]/Pt NSs with excellent photocatalytic and continuous thermocatalytic CO oxidation performance, representing the thus-far reported best Pt nano-material-based catalysts.

Self-condensation-assisted chemical vapour deposition growth of atomically two-dimensional MOF single-crystals

Two-dimensional metal-organic frameworks (MOFs) have a wide variety of applications in molecular separation and other emerging technologies, including atomically thin electronics. However, due to the inherent fragility and strong interlayer interactions, high-quality MOF crystals of atomic thickness, especially isolated MOF crystal monolayers, have not been easy to prepare. Here, we report the self-condensation-assisted chemical vapour deposition growth of atomically thin MOF single-crystals, yielding monolayer single-crystals of poly[Fe(benzimidazole)2] up to 62 μm in grain sizes. By using transmission electron microscopy and high-resolution atomic force microscopy, high crystallinity and atomic-scale single-crystal structure are verified in the atomically MOF flakes. Moreover, integrating such MOFs with MoS2 to construct ultrathin van der Waals heterostructures is achieved by direct growth of atomically MOF single-crystals onto monolayer MoS2, and enables a highly selective ammonia sensing. These demonstrations signify the great potential of the method in facilitating the development of the fabrication and application of atomically thin MOF crystals.

Recent advances in the interfacial engineering of MOF-based mixed matrix membranes for gas separation

The membrane process stands as a promising and transformative technology for efficient gas separation due to its high energy efficiency, operational simplicity, low environmental impact, and easy up-and-down scaling. Metal-organic framework (MOF)-polymer mixed matrix membranes (MMMs) combine MOFs' superior gas-separation performance with polymers' processing versatility, offering the opportunity to address the limitations of pure polymer or inorganic membranes for large-scale integration. However, the incompatibility between the rigid MOFs and flexible polymer chains poses a challenge in MOF MMM fabrication, which can cause issues such as MOF agglomeration, sedimentation, and interfacial defects, substantially weakening membrane separation efficiency and mechanical properties, particularly gas separation. This review focuses on engineering MMMs' interfaces, detailing recent strategies for reducing interfacial defects, improving MOF dispersion, and enhancing MOF loading. Advanced characterisation techniques for understanding membrane properties, specifically the MOF-polymer interface, are outlined. Lastly, it explores the remaining challenges in MMM research and outlines potential future research directions.

Confined-Coordination Induced Intergrowth of Metal-Organic Frameworks into Precise Molecular Sieving Membranes

Metal-organic framework (MOF) membranes with rich functionality and tunable pore system are promising for precise molecular separation; however, it remains a challenge to develop defect-free high-connectivity MOF membrane with high water stability owing to uncontrollable nucleation and growth rate during fabrication process. Herein, we report on a confined-coordination induced intergrowth strategy to fabricate lattice-defect-free Zr-MOF membrane towards precise molecular separation. The confined-coordination space properties (size and shape) and environment (water or DMF) were regulated to slow down the coordination reaction rate via controlling the counter-diffusion of MOF precursors (metal cluster and ligand), thereby inter-growing MOF crystals into integrated membrane. The resulting Zr-MOF membrane with angstrom-sized lattice apertures exhibits excellent separation performance both for gas separation and water desalination process. It was achieved H2 permeance of ~1200 GPU and H2/CO2 selectivity of ~67; water permeance of ~8 L ⋅ m-2 ⋅ h-1 ⋅ bar-1 and MgCl2 rejection of ~95 %, which are one to two orders of magnitude higher than those of state-of-the-art membranes. The molecular transport mechanism related to size-sieving effect and transition energy barrier differential of molecules and ions was revealed by density functional theory calculations. Our work provides a facile approach and fundamental insights towards developing precise molecular sieving membranes.

Popping and Locking: Balanced Rigidity and Porosity of Zeolitic Imidazolate Frameworks for High-Productivity Methane Purification

Zeolitic imidazolate frameworks (ZIFs) hold great promise in carbon capture, owing to their structural designability and functional porosity. However, intrinsic linker dynamics limit their pressure-swing adsorption application to biogas upgrading and methane purification. Recently, a functionality-locking strategy has shown feasibility in suppressing such dynamics. Still, a trade-off between structural rigidity and uptake capacity remains a key challenge for optimizing their high-pressure CO2/CH4 separation performance. Here, we report a sequential structural locking (SSL) strategy for enhancing the CO2 capture capacity and CH4 purification productivity in dynamic ZIFs (dynaZIFs). Specifically, we isolated multiple functionality-locked phases, ZIF-78-lt, -ht1, and -ht2, by activation at 50, 160, and 210 °C, respectively. We observed multiple-level locking through gas adsorption and powder X-ray diffraction. We uncovered an SSL mechanism dominated by linker-linker π-π interactions that transit to C-H···O hydrogen bonds with binding energies increasing from -0.64 to -2.77 and -5.72 kcal mol-1, respectively, as evidenced by single-crystal X-ray diffraction and density functional theory calculations. Among them, ZIF-78-ht1 exhibits the highest CO2 capture capacity (up to 18.6 mmol g-1) and CH4 purification productivity (up to 7.6 mmol g-1) at 298 K and 30 bar. These findings provide molecular and energetic insights into leveraging framework flexibility through the SSL mechanism to optimize porous materials' separation performance.

Micro and Nanoporous Membrane Platforms for Carbon Neutrality: Membrane Gas Separation Prospects

Recently, carbon neutrality has been promoted as a potentially practical solution to global CO2 emissions and increasing energy-consumption challenges. Many attempts have been made to remove CO2 from the environment to address climate change and rising sea levels owing to anthropogenic CO2 emissions. Herein, membrane technology is proposed as a suitable solution for carbon neutrality. This review aims to comprehensively evaluate the currently available scientific research on membranes for carbon capture, focusing on innovative microporous material membranes used for CO2 separation and considering their material, chemical, and physical characteristics and permeability factors. Membranes from such materials comprise metal-organic frameworks, zeolites, silica, porous organic frameworks, and microporous polymers. The critical obstacles related to membrane design, growth, and CO2 capture and usage processes are summarized to establish novel membranes and strategies and accelerate their scaleup.

2D MOFs and Zeolites for Composite Membrane and Gas Separation Applications: A Brief Review

Commercial membranes have predominantly been fabricated from polymers due to their economic viability and processability. This choice offers significant advantages in energy efficiency, cost-effectiveness, and operational simplicity compared to conventional separation techniques like distillation. However, polymeric membranes inherently exhibit a trade-off between their permeability and selectivity, which is summarized in the Robeson upper bound. To potentially surpass these limitations, mixed-matrix membranes (MMMs) can be an alternative solution, which can be constructed by combining polymers with inorganic additives such as metal-organic frameworks (MOFs) and zeolites. Incorporating high-aspect-ratio fillers like MOF nanosheets and zeolite nanosheets is of significant importance. This incorporation not only enhances the efficiency of separation processes but also reinforces the mechanical robustness of the membranes. We outline synthesis techniques for producing two-dimensional (2D) crystals (including nanocrystals with high aspect ratio) and provide examples of their integration into membranes to customize separation performances. Moreover, we propose a potential trajectory for research in the area of high-aspect-ratio materials-based MMMs, supported by a mathematical-model-based performance prediction.

Light-responsive and ultrapermeable two-dimensional metal-organic framework membrane for efficient ionic energy harvesting

Nanofluidic membranes offer exceptional promise for osmotic energy conversion, but the challenge of balancing ionic selectivity and permeability persists. Here, we present a bionic nanofluidic system based on two-dimensional (2D) copper tetra-(4-carboxyphenyl) porphyrin framework (Cu-TCPP). The inherent nanoporous structure and horizontal interlayer channels endow the Cu-TCPP membrane with ultrahigh ion permeability and allow for a power density of 16.64 W m-2, surpassing state of-the-art nanochannel membranes. Moreover, leveraging the photo-thermal property of Cu-TCPP, light-controlled ion active transport is realized even under natural sunlight. By combining solar energy with salinity gradient, the driving force for ion transport is reinforced, leading to further improvements in energy conversion performance. Notably, light could even eliminate the need for salinity gradient, achieving a power density of 0.82 W m-2 in a symmetric solution system. Our work introduces a new perspective on developing advanced membranes for solar/ionic energy conversion and extends the concept of salinity energy to a notion of ionic energy.

Green solvent systems for material syntheses and chemical reactions

It is of great significance to develop environmentally benign, non-volatile and recyclable green solvents for different applications. This feature article overviews the properties of green solvent systems (e.g., ionic liquids, supercritical carbon dioxide, deep eutectic solvents and mixed green solvent systems) and their applications in (1) framework material syntheses, including metal-organic frameworks, covalent organic frameworks and hydrogen-bonded organic frameworks, and (2) CO2 conversion reactions, including photocatalytic and electrocatalytic reduction reactions. Finally, the future perspective for research on green solvent systems is proposed from different aspects.

Two-Dimensional Sulfonate-Functionalized Metal-Organic Framework Membranes for Efficient Lithium-Ion Sieving

Two-dimensional (2D) membranes have shown promising potential for ion-selective separation but often suffer from the trade-off between permeability and selectivity. Herein, we report an ultrathin 2D sulfonate-functionalized metal-organic framework (MOF) membrane for efficient lithium-ion sieving. The narrow pores with angstrom precision in the MOF assist hydrated ions to partially remove the hydration shell, according to different hydration energies. The abundant sulfonate groups in the MOF channels serve as hopping sites for fast lithium-ion transport, contributing to a high Li-ion permeability. Then, the difference in affinity of the Li+, Na+, K+, and Mg2+ ions to the terminal sulfonate groups further enhances the Li-ion selectivity. The reported ultrathin MOF membrane overcomes the trade-off between permeability and selectivity and opens up a new avenue for highly permselective membranes.

Gas-responsive two-dimensional metal-organic framework composites for trace visualization of volatile organic compounds

Highly sensitive and specific identification of complex volatile organic compound mixtures has always been a huge challenge in the field of gas detection. To address this issue, the gas-responsive two-dimensional metal-organic framework (MOF) composites have been designed for fabricating a colorimetric sensor arrays for extremely sensitive detection of volatile organic compounds (VOCs). The physically exfoliated MOF nanosheets Zn2(bim)4 with large surface area and abundant unsaturated active sites were used for loading various dyes to form dye/Zn2(bim)4 composites. Due to the protective effect on dye activity and preconcentration for VOCs, the dye/Zn2(bim)4 composites-based colorimetric sensor arrays showed significantly enhanced sensitivity compared with the corresponding dyes for the detection of various VOCs. The mechanical flexibility of the dye/MOF nanosheets endowed the excellent film-forming properties on various substrates for fabricating the colorimetric sensor arrays. Besides owing to the hydrophobic property and the protection of the Zn2(bim)4 nanosheets, the dye/Zn2(bim)4 sensor arrays exhibited excellent anti-interference including humidity and temperature influence. On the basis of the fantastic properties of dye/Zn2(bim)4 composites for VOCs detection, the dye/Zn2(bim)4 sensor arrays were applied for the early perception of the plant disease late blight via ultra-sensitive and highly specific sensing the VOCs released from the infected plants.

Starfruit-Shaped Zirconium Metal-Organic Frameworks: From 3D Intermediates to 2D Nanosheet Petals with Enhanced Catalytic Activity

We present the fabrication of a novel Starfruit-shaped metal-organic framework (SMOF) composed of zirconium and Tetra(4-carboxyphenyl)porphine linkers. The SMOF exhibits a unique morphology with edge-sharing two-dimensional (2D) nanosheet petals. Our investigation unravels a captivating transformation process, wherein three-dimensional (3D) shuttle-shaped MOFs form initially and subsequently evolve into 2D nanosheet-based SMOF structures. The distinct morphology of SMOF showcases superior catalytic activity in detoxifying G-type nerve agent and blister agent simulants, surpassing that of its 3D counterparts. This discovery of the 3D-to-2D transition growth pathway unlocks exciting opportunities for exploring novel strategies in advanced MOF nanostructure development, not only for catalysis but also for various other applications.

Solution processing of crystalline porous material based membranes for CO2 separation

The carbon emission problem is a significant challenge in today's society, which has led to severe global climate issues. Membrane-based separation technology has gained considerable interest in CO2 separation due to its simplicity, environmental friendliness, and energy efficiency. Crystalline porous materials (CPMs), such as zeolites, metal-organic frameworks, covalent organic frameworks, hydrogen-bonded organic frameworks, and porous organic cages, hold great promise for advanced CO2 separation membranes because of their ordered and customizable pore structures. However, the preparation of defect-free and large-area crystalline porous material (CPM)-based membranes remains challenging, limiting their practical use in CO2 separation. To address this challenge, the solution-processing method, commonly employed in commercial polymer preparation, has been adapted for CPM membranes in recent years. Nanosheets, spheres, molecular cages, and even organic monomers, depending on the CPM type, are dissolved in suitable solvents and processed into continuous membranes for CO2 separation. This feature article provides an overview of the recent advancements in the solution processing of CPM membranes. It summarizes the differences among the solution-processing methods used for forming various CPM membranes, highlighting the key factors for achieving continuous membranes. The article also summarizes and discusses the CO2 separation performance of these membranes. Furthermore, it addresses the current issues and proposes future research directions in this field. Overall, this feature article aims to shed light on the development of solution-processing techniques for CPM membranes, facilitating their practical application in CO2 separation.

Sub-micro porous thin polymer membranes for discriminating H2 and CO2

Polymeric membranes with high permeance and remarkable selectivity for simultaneous H2 purification and CO2 capture under industry-relevant conditions are absent. Herein, sub-micro pores with precise molecular sieving capability are created in ultra-thin (13-30 nm) polymer membranes via controllable transformation of amine-linked polymer (ALP) films into benzimidazole-and-amine-linked polymer (BIALP) layers. The BIALP membranes exhibit stable unprecedented H2/CO2 selectivity of 120 with a H2 permeance of 315 GPU. Furthermore, high pressure (up to 11 bar) and thermal (up to 300 °C) resistance is delivered. This work provides a concept on designing porous polymeric membranes for precise molecular discrimination.

Supramolecular nanosheet formation-induced photosensitisation mechanism change of Rose Bengal dye in aqueous media

Development of two-dimensional materials and exploration of their functionalities are significant challenges due to their potential. In this study, we successfully fabricated a supramolecular nanosheet composed of amphiphilic Rose Bengal dyes in an aqueous medium. Furthermore, we elucidated a distinct change in the photosensitisation mechanism induced by nanosheet formation.

Integrating Photoactive Ligands into Crystalline Ultrathin 2D Metal-Organic Framework Nanosheets for Efficient Photoinduced Energy Transfer

3D metal-organic frameworks (MOFs) have gained attention as heterogeneous photocatalysts due to their porosity and unique host-guest interactions. Despite their potential, MOFs face challenges, such as inefficient mass transport and limited light penetration in photoinduced energy transfer processes. Recent advancements in organic photocatalysis have uncovered a variety of photoactive cores, while their heterogenization remains an underexplored area with great potential to build MOFs. This gap is bridged by incorporating photoactive cores into 2D MOF nanosheets, a process that merges the realms of small-molecule photochemistry and MOF chemistry. This approach results in recyclable heterogeneous photocatalysts that exhibit an improved mass transfer efficiency. This research demonstrates a bottom-up synthetic method for embedding photoactive cores into 2D MOF nanosheets, successfully producing variants such as PCN-641-NS, PCN-643-NS, and PCN-644-NS. The synthetic conditions were systematically studied to optimize the crystallinity and morphology of these 2D MOF nanosheets. Enhanced host-guest interactions in these 2D structures were confirmed through various techniques, particularly solid-state NMR studies. Additionally, the efficiency of photoinduced energy transfer in these nanosheets was evidenced through photoborylation reactions and the generation of reactive oxygen species (ROS).

Catalysis with Two-Dimensional Metal-Organic Frameworks: Synthesis, Characterization, and Modulation

The demand for the exploration of highly active and durable electro/photocatalysts for renewable energy conversion has experienced a significant surge in recent years. Metal-organic frameworks (MOFs), by virtue of their high porosity, large surface area, and modifiable metal centers and ligands, have gained tremendous attention and demonstrated promising prospects in electro/photocatalytic energy conversion. However, the small pore sizes and limited active sites of 3D bulk MOFs hinder their wide applications. Developing 2D MOFs with tailored thickness and large aspect ratio has emerged as an effective approach to meet these challenges, offering a high density of exposed active sites, better mechanical stability, better assembly flexibility, and shorter charge and photoexcited state transfer distances compared to 3D bulk MOFs. In this review, synthesis methods for the most up-to-date 2D MOFs are first overviewed, highlighting their respective advantages and disadvantages. Subsequently, a systematic analysis is conducted on the identification and electronic structure modulation of catalytic active sites in 2D MOFs and their applications in renewable energy conversion, including electrocatalysis and photocatalysis (electro/photocatalysis). Lastly, the current challenges and future development of 2D MOFs toward highly efficient and practical electro/photocatalysis are proposed.

Nanowire-assisted electrochemical perforation of graphene oxide nanosheets for molecular separation

Two-dimensional nanosheets, e.g., graphene oxide (GO), have been widely used to fabricate efficient membranes for molecular separation. However, because of poor transport across nanosheets and high width-to-thickness ratio, the permeation pathway length and tortuosity of these membranes are extremely large, which limit their separation performance. Here we report a facile, scalable, and controllable nanowire electrochemical concept for perforating and modifying nanosheets to shorten permeation pathway and adjust transport property. It is found that confinement effects with locally enhanced charge density, electric field, and hydroxyl radical generation over nanowire tips on anode can be executed under low voltage, thereby inducing confined direct electron loss and indirect oxidation to reform configuration and composition of GO nanosheets. We demonstrate that the porous GO nanosheets with a lot of holes are suitable for assembling separation membranes with tuned accessibility, tortuosity, interlayer space, electronegativity, and hydrophilicity. For molecular separation, the prepared membranes exhibit quadruple water permeance and higher rejections for salts (>91%) and small molecules (>96%) as/than original ones. This nanowire electrochemical perforation concept offers a feasible strategy to reconstruct two-dimensional materials and tune their transport property for separation.

Energy Application of Graphene Based Membrane: Hydrogen Separation

Hydrogen gas (H2 ) is a viable energy carrier that has the potential to replace the traditional fossil fuels and contribute to achieving zero net emissions, making it an attractive option for a hydrogen-based society. However, current H2 purification technologies are often limited by high energy consumption, and as a result, there is a growing demand for alternative techniques that offer higher H2 purity and energy efficiency. Membrane separation has emerged as a promising approach for obtaining high-purity H2 gas with low energy consumption. Nevertheless, despite years of development, commercial polymeric membranes have limited performance, prompting researchers to explore alternative materials. In this context, carbon-based membranes, specifically graphene-based nanomaterials, have gained significant attention as potential membrane materials due to their unique properties. In this review, we provide a comprehensive overview of carbon-based membranes for H2 gas separation, fabrication of the membrane, and its characterization, including their advantages and limitations. We also explore the current technological challenges and suggest insights into future research directions, highlighting potential ways to improve graphene-based membranes performance for H2 separations.

Recent Progress in 2D Metal-Organic Framework-Related Materials

2D metal-organic frameworks-based (2D MOF-related) materials benefit from variable topological structures, plentiful open active sites, and high specific surface areas, demonstrating promising applications in gas storage, adsorption and separation, energy conversion, and other domains. In recent years, researchers have innovatively designed multiple strategies to avoid the adverse effects of conventional methods on the synthesis of high-quality 2D MOFs. This review focuses on the latest advances in creative synthesis techniques for 2D MOF-related materials from both the top-down and bottom-up perspectives. Subsequently, the strategies are categorized and summarized for synthesizing 2D MOF-related composites and their derivatives. Finally, the current challenges are highlighted faced by 2D MOF-related materials and some targeted recommendations are put forward to inspire researchers to investigate more effective synthesis methods.

Modular Customization and Regulation of Metal-Organic Frameworks for Efficient Membrane Separations

Metal-organic frameworks (MOFs) are considered ideal membrane candidates for energy-efficient separations. However, the MOF membrane amount to date is only a drop in the bucket compared to the material collections. The fabrication of an arbitrary MOF membrane exhibiting inherent separation capacity of the material remains a long-standing challenge. Herein, we report a MOF modular customization strategy by employing four MOFs with diverse structures and physicochemical properties and achieving innovative defect-free membranes for efficient separation validation. Each membrane fully displays the separation potential according to the MOF pore/channel microenvironment, and consequently, an intriguing H2 /CO2 separation performance sequence is achieved (separation factor of 1656-5.4, H2 permeance of 964-2745 gas permeation unit). Taking advantage of this strategy, separation performance can be manipulated by a non-destructive modification separately towards the MOF module. This work establishes a universal full-chain demonstration for membrane fabrication-separation validation-microstructure modification and opens an avenue for exclusive customization of membranes for important separations.

Air/liquid interfacial formation process of conductive metal-organic framework nanosheets

The air/liquid interface is a superior platform to create nanosheets of materials by promoting spontaneous two-dimensional growth of components. Metal-organic frameworks (MOFs)-intrinsically porous crystals-with π-conjugated triphenylene-based ligands show high electrical conductivities. Forming nanosheets of such conductive MOFs should enable their use in electronic devices. Although highly conductive MOF nanosheets have been created at the air/liquid interface, direct control of their continuity, morphology, thickness, crystallinity, and orientation directly influencing device performance remains as an issue to be addressed. Here, we present detailed insights into the formation process of electrically conductive MOF nanosheets composed of 2,3,6,7,10,11-hexaiminotriphenylene (HITP) and Ni2+ ions (HITP-Ni-NS) at the air/liquid interface. The morphological and structural features of HITP-Ni-NS strongly depend on the standing time-the time without any external actions involved, but leaving the interface undisturbed after setting the ligand solution onto the metal-ion solution. We find that the fundamental features of HITP-Ni-NS are determined by the standing time with conductivity sensitively influenced by such pre-determined HITP-Ni-NS characteristics. These findings will lead towards the establishment of a rational strategy for creating MOF nanosheets at the air/liquid interface with desired properties, thereby accelerating their use in diverse potential applications.

Bipolar Molecular Torque Wrench Modulates the Stacking of Two-Dimensional Metal-Organic Framework Nanosheets

The precise modulation of nanosheet stacking modes introduces unforeseen properties and creates momentous applications but remains a challenge. Herein, we proposed a strategy using bipolar molecules as torque wrenches to control the stacking modes of 2-D Zr-1,3,5-(4-carboxylphenyl)-benzene metal-organic framework (2-D Zr-BTB MOF) nanosheets. The bipolar phenyl-alkanes, phenylmethane (P-C1) and phenyl ethane (P-C2), predominantly instigated the rotational stacking of Zr-BTB-P-C1 and Zr-BTB-P-C2, displaying a wide angular distribution. This included Zr-BTB-P-C1 orientations at 0, 12, 18, and 24° and Zr-BTB-P-C2 orientations at 0, 6, 12, 15, 24, and 30°. With reduced polarity, phenyl propane (P-C3) and phenyl pentane (P-C5) introduced steric hindrance and facilitated alkyl hydrophobic interactions with the nanosheets, primarily resulting in the modulation of eclipsed stacking for Zr-BTB-P-C3 (64.8%) and Zr-BTB-P-C5 (93.3%) nanosheets. The precise angle distributions of four Zr-BTB-P species were in agreement with theoretical calculations. The alkyl induction mechanism was confirmed by the sequential guest replacement and 2-D 13C-1H heteronuclear correlation (HETCOR). In addition, at the single-particle level, we first observed that rotational stacked pores exhibited similar desorption rates for xylene isomers, while eclipsed stacked pores showed significant discrepancy for xylenes. Moreover, the eclipsed nanosheets as stationary phases exhibited high resolution, selectivity, repeatability, and durability for isomer separation. The universality was proven by another series of bipolar acetate-alkanes. This bipolar molecular torque wrench strategy provides an opportunity to precisely control the stacking modes of porous nanosheets.

Mechanical Exfoliation of Multilayer Pseudohalogen-Bridged Nanosheets

The development of nanolayered materials is one of the greatest challenges in nanoscience. Until now, pseudohalogen-bridged nanosheets using the mechanical exfoliation method have not been reported. A state-of-the-art material, {[FeII(3-acetylpyridine)2][HgII(μ-SCN)4]}n (1), has been developed to achieve the goal. The compound forms a two-dimensional (2D) coordination polymer with weak out-of-plane van der Waals interactions and has an intrinsic tendency to form shear planes perpendicular to the crystallographic c-direction. These structural features predispose 1 to mechanical exfoliation realized by employing the "Scotch-tape method". As a result, nanosheets were fabricated and characterized by digital optical microscopy, scanning electron microscopy, and atomic force microscopy. The nanosheets were found to have a minimum thickness of ∼15 nm and a lateral size of several micrometers. As the first example of thiocyanato-bridged coordination nanosheets, these materials extend the scope of 2D materials and potentially pave the way toward developing nanolayered materials.

Chemically Asymmetric Polymers Manipulate the Crystallization of Two-Dimensional Covalent Organic Frameworks to Synthesize Processable Nanosheets

Nanosheets derived from two-dimensional covalent organic frameworks (2D COFs) are increasingly desirable in various fields. While breakthroughs in the chemical and physical delamination of 2D COFs are rising, precisely regulating the growth of the COF nanosheets has not been realized yet. Herein, we report an effective strategy of polymer-manipulated crystallization to accurately control the growth of COF nanosheets. Chemically asymmetric polyvinylpyrrolidone (PVP) is developed as the manipulator that selectively interacts with the aldehydes and (100) facet to induce anisotropic growth of COFs. The number of PVP constitutional units determines this specific interaction, leading to molecularly thin but thickness-controllable nanosheets with excellent dispersity. We process these nanosheets into robust A4-sized membranes for ultraselective molecular separation. The membrane intercalated with long-chain PVP demonstrates largely improved performance, surpassing the reported COF membranes. This work reports a strategy for anisotropically crystallizing 2D COFs to yield processable nanosheets toward practical applications.

Utilization of 2D materials in aqueous zinc ion batteries for safe energy storage devices

Aqueous rechargeable battery has been an intense topic of research recently due to the significant safety issues of conventional Li-ion batteries (LIBs). Amongst the various candidates of aqueous batteries, aqueous zinc ion batteries (AZIBs) hold great promise as a next generation safe energy storage device due to its low cost, abundance in nature, low toxicity, environmental friendliness, low redox potential, and high theoretical capacity. Yet, the promise has not been realized due to their limitations, such as lower capacity compared to traditional LIB, dendrite growth, detrimental degradation of electrode materials structure as ions intercalate/de-intercalate, and gas evolution/corrosion at the electrodes, which remains a significant challenge. To address the challenges, various 2D materials with different physiochemical characteristics have been utilized. This review explores fundamental physiochemical characteristics of widely used 2D materials in AZIBs, including graphene, MoS2, MXenes, 2D metal organic framework, 2D covalent organic framework, and 2D transition metal oxides, and how their characteristics have been utilized or modified to address the challenges in AZIBs. The review also provides insights and perspectives on how 2D materials can help to realize the full potential of AZIBs for next-generation safe and reliable energy storage devices.

Tuning the Stacking Modes of Ultrathin Two-Dimensional Metal-Organic Framework Nanosheet Membranes for Highly Efficient Hydrogen Separation

Two-dimensional (2D) metal-organic framework (MOF) membranes are considered potential gas separation membranes of the next generation due to their structural diversity and geometrical functionality. However, achieving a rational structure design for a 2D MOF membrane and understanding the impact of MOF nanosheet stacking modes on membrane separation performance remain challenging tasks. Here, we report a novel kind of 2D MOF membrane based on [Cu2 Br(IN)2 ]n (IN=isonicotinato) nanosheets and propose that synergetic stacking modes of nanosheets have a significant influence on gas separation performance. The stacking of the 2D MOF nanosheets is controlled by solvent droplet dynamic behaviors at different temperatures of drop coating. Our 2D MOF nanosheet membranes exhibit high gas separation performances for H2 /CH4 (selectivity >290 with H2 permeance >520 GPU) and H2 /CO2 (selectivity >190 with H2 permeance >590 GPU) surpassing the Robeson upper bounds, paving a potential way for eco-friendly H2 separation.

Suppression of Methanol and Formate Crossover through Sulfanilic-Functionalized Holey Graphene as Proton Exchange Membranes

Proton exchange membranes with high proton conductivity and low crossover of fuel molecules are required to realize advanced fuel-cell technology. The selective transportation of protons, which occurs by blocking the transportation of fuel molecules across a proton exchange membrane, is crucial to suppress crossover while maintaining a high proton conductivity. In this study, a simple yet powerful method is proposed for optimizing the crossover-conductivity relationship by pasting sulfanilic-functionalized holey graphenes onto a Nafion membrane. The results show that the sulfanilic-functionalized holey graphenes supported by the membrane suppresses the crossover by 89% in methanol and 80% in formate compared with that in the self-assembled Nafion membrane; an ≈60% reduction is observed in the proton conductivity. This method exhibits the potential for application in advanced fuel cells that use methanol and formic acid as chemical fuels to achieve high energy efficiency.

Unit-cell-thick zeolitic imidazolate framework films for membrane application

Zeolitic imidazolate frameworks (ZIFs) are a subset of metal-organic frameworks with more than 200 characterized crystalline and amorphous networks made of divalent transition metal centres (for example, Zn2+ and Co2+) linked by imidazolate linkers. ZIF thin films have been intensively pursued, motivated by the desire to prepare membranes for selective gas and liquid separations. To achieve membranes with high throughput, as in ångström-scale biological channels with nanometre-scale path lengths, ZIF films with the minimum possible thickness-down to just one unit cell-are highly desired. However, the state-of-the-art methods yield membranes where ZIF films have thickness exceeding 50 nm. Here we report a crystallization method from ultradilute precursor mixtures, which exploits registry with the underlying crystalline substrate, yielding (within minutes) crystalline ZIF films with thickness down to that of a single structural building unit (2 nm). The film crystallized on graphene has a rigid aperture made of a six-membered zinc imidazolate coordination ring, enabling high-permselective H2 separation performance. The method reported here will probably accelerate the development of two-dimensional metal-organic framework films for efficient membrane separation.

Two Dimensional Ir-Based Catalysts for Acidic OER

Electrochemical water splitting in acidic media is one of the most promising hydrogen production technologies, yet its practical applications in proton exchange membrane (PEM) water electrolyzers are limited by the anodic oxygen evolution reaction (OER). Iridium (Ir)-based materials are considered as the state-of-the-art catalysts for acidic OER due to their good stability under harsh acidic conditions. However, their activities still have much room for improvement. Two-dimensional (2D) materials are full of the advantages of high-surface area, unique electrical properties, facile surface modification, and good stability, making the development of 2D Ir-based catalysts more attractive for achieving high catalytic performance. In this review, first, the unique advantages of 2D catalysts for electrocatalysis are reviewed. Thereafter, the classification, synthesis methods, and recent OER achievements of 2D Ir-based materials, including pure metals, alloys, oxides, and perovskites are introduced. Finally, the prospects and challenges of developing 2D Ir-based catalysts for future acidic OER are discussed.

Fine-Tuning Electrolyte Concentration and Metal-Organic Framework Surface toward Actuating Fast Zn2+ Dehydration for Aqueous Zn-Ion Batteries

Functional porous coating on zinc electrode is emerging as a powerful ionic sieve to suppress dendrite growth and side reactions, thereby improving highly reversible aqueous zinc ion batteries. However, the ultrafast charge rate is limited by the substantial cation transmission strongly associated with dehydration efficiency. Here, we unveil the entire dynamic process of solvated Zn2+ ions' continuous dehydration from electrolyte across the MOF-electrolyte interface into channels with the aid of molecular simulations, taking zeolitic imidazolate framework ZIF-7 as proof-of-concept. The moderate concentration of 2 M ZnSO4 electrolyte being advantageous over other concentrations possesses the homogeneous water-mediated ion pairing distribution, resulting in the lowest dehydration energy, which elucidates the molecular mechanism underlying such concentration adopted by numerous experimental studies. Furthermore, we show that modifying linkers on the ZIF-7 surface with hydrophilic groups such as -OH or -NH2 can weaken the solvation shell of Zn2+ ions to lower the dehydration free energy by approximately 1 eV, and may improve the electrical conductivity of MOF. These results shed light on the ions delivery mechanism and pave way to achieve long-term stable zinc anodes at high capacities through atomic-scale modification of functional porous materials.

Direct Synthesis of Metal-Organic Framework Sols: Advances and Perspectives

The intrinsic lack of processability in the conventional nano/microcrystalline powder form of metal-organic frameworks (MOFs) greatly limits their application in various fields. Synthesis of MOFs with certain flowability make them promising for multitudinous applications. The direct synthesis strategy represents one of the simplest and efficient method for synthesizing solution processable MOF sols/suspensions, compared with other approaches, for instance, the post-synthesis surface modification, the direct dispersion of MOFs in hindered ionic liquids, as well as the calcination method toward a few MOFs with melting behavior. This article reviews the recent direct synthesis strategies of solution processable MOF sols and their typical applications in different fields. The direct synthesis strategies of MOF sols can be classified into two categories: particle size reduction strategy, and selective coordination strategy. The synthesis mechanism of different strategies and the factors affecting the formation of sols are summarized. The application of solution processable MOF sols in different fields are introduced, showing great application potentials. Furthermore, the challenges faced by the direct synthesis of MOF sols and the main methods to deal with the challenges are emphasized, and the future development trend is prospected.

Oriented Ultrathin π-complexation MOF Membrane for Ethylene/Ethane and Flue Gas Separations

Rational design and engineering of high-performance molecular sieve membranes towards C2 H4 /C2 H6 and flue gas separations remain a grand challenge to date. In this study, through combining pore micro-environment engineering with meso-structure manipulation, highly c-oriented sub-100 nm-thick Cu@NH2 -MIL-125 membrane was successfully prepared. Coordinatively unsaturated Cu ions immobilized in the NH2 -MIL-125 framework enabled high-affinity π-complexation interactions with C2 H4 , resulting in an C2 H4 /C2 H6 selectivity approaching 13.6, which was 9.4 times higher than that of pristine NH2 -MIL-125 membrane; moreover, benefiting from π-complexation interactions between CO2 and Cu(I) sites, our membrane displayed superior CO2 /N2 selectivity of 43.2 with CO2 permeance of 696 GPU, which far surpassed the benchmark of other pure MOF membranes. The above multi-scale structure optimization strategy is anticipated to present opportunities for significantly enhancing the separation performance of diverse molecular sieve membranes.

Recent Advancements in Metal-Organic Framework-Based Membranes for Hydrogen Separation: A Review

Metal-organic frameworks (MOFs) are promising porous materials that have huge potential for gas separation when put in the membrane configuration. MOFs have huge potential due to certain salient features of the MOFs such as excellent pore size, ease of tuning the pore chemistry, higher surface area, and chemical and thermal stabilities. MOFs have been explored for various gas separation and storage applications. This review discusses various approaches for fabricating MOFs-based membranes for the separation of H2 gas from a variety of feeds having various gases CO2 , CO, N2 , and CH4 as impurities. The emphasis has been put on three types of membranes for H2 separation which include MOFs-based hollow fibrous/tubular/disk membranes, MOFs-based mixed matrix membranes (MMMs), and MOFs-based stand-alone membranes. In addition, various challenges such as reducing inhomogeneity between MOFs and polymeric matrices have also been discussed. Similarly, the approaches to successfully decorating MOFs on different supports in different configurations have been explained. The possible ways of improving the MOFs-based membranes for H2 have also been discussed.

Polyiodo Azole-Based Metal-Organic Framework Energetic Biocidal Material for Synergetic Sterilization Applications

Biological hazards caused by bacteria, viruses, and toxins have become a major survival and development issue facing the international community. However, the traditional method of disinfection and sterilization is helpless in dealing with viruses that spread quickly and are highly infectious. Metal-organic framework (MOF) biocidal materials hold promise as superior alternatives to traditional sterilization materials because of their stable framework structures and unique properties. Now, we demonstrate for the first time the synthesis of a MOF (TIBT-Cu) containing Cu metal centers and tetraiodo-4,4'-bi-1,2,4-triazole as the main ligand. This novel MOF biocidal material has good thermal stability (Td = 278 °C), excellent mechanical sensitivity, and a high bacteriostatic efficiency (>99.90%). Additionally, the particles produced by the combustion of TIBT-Cu are composed of active iodine substances and CuO particles, which can act synergistically against harmful microorganisms such as bacteria and viruses. This study provides a new perspective for the preparation of highly effective bactericidal materials.

Solid-solvent processing of ultrathin, highly loaded mixed-matrix membrane for gas separation

Mixed-matrix membranes (MMMs) that combine processable polymer with more permeable and selective filler have potential for molecular separation, but it remains difficult to control their interfacial compatibility and achieve ultrathin selective layers during processing, particularly at high filler loading. We present a solid-solvent processing strategy to fabricate an ultrathin MMM (thickness less than 100 nanometers) with filler loading up to 80 volume %. We used polymer as a solid solvent to dissolve metal salts to form an ultrathin precursor layer, which immobilizes the metal salt and regulates its conversion to a metal-organic framework (MOF) and provides adhesion to the MOF in the matrix. The resultant membrane exhibits fast gas-sieving properties, with hydrogen permeance and/or hydrogen-carbon dioxide selectivity one to two orders of magnitude higher than that of state-of-the-art membranes.

Recent Progress of Copper-Based Nanomaterials in Tumor-Targeted Photothermal Therapy/Photodynamic Therapy

Nanotechnology, an emerging and promising therapeutic tool, may improve the effectiveness of phototherapy (PT) in antitumor therapy because of the development of nanomaterials (NMs) with light-absorbing properties. The tumor-targeted PTs, such as photothermal therapy (PTT) and photodynamic therapy (PDT), transform light energy into heat and produce reactive oxygen species (ROS) that accumulate at the tumor site. The increase in ROS levels induces oxidative stress (OS) during carcinogenesis and disease development. Because of the localized surface plasmon resonance (LSPR) feature of copper (Cu), a vital trace element in the human body, Cu-based NMs can exhibit good near-infrared (NIR) absorption and excellent photothermal properties. In the tumor microenvironment (TME), Cu2+ combines with H2O2 to produce O2 that is reduced to Cu1+ by glutathione (GSH), causing a Fenton-like reaction that reduces tumor hypoxia and simultaneously generates ROS to eliminate tumor cells in conjunction with PTT/PDT. Compared with other therapeutic modalities, PTT/PDT can precisely target tumor location to kill tumor cells. Moreover, multiple treatment modalities can be combined with PTT/PDT to treat a tumor using Cu-based NMs. Herein, we reviewed and briefly summarized the mechanisms of actions of tumor-targeted PTT/PDT and the role of Cu, generated from Cu-based NMs, in PTs. Furthermore, we described the Cu-based NMs used in PTT/PDT applications.

Aptamer-modified metal organic frameworks for measurement of food contaminants: a review

The measurement of food contaminants faces a great challenge owing to the increasing demand for safe food, increasing consumption of fast food, and rapidly changing patterns of human consumption. As different types of contaminants in food products can pose different levels of threat to human health, it is desirable to develop specific and rapid methods for their identification and quantification. During the past few years, metal-organic framework (MOF)-based materials have been extensively explored in the development of food safety sensors. MOFs are porous crystalline materials with tunable composition, dynamic porosity, and facile surface functionalization. The construction of high-performance biosensors for a range of applications (e.g., food safety, environmental monitoring, and biochemical diagnostics) can thus be promoted through the synergistic combination of MOFs with aptamers. Accordingly, this review article delineates recent innovations achieved for the aptamer-functionalized MOFs toward the detection of food contaminants. First, we describe the basic concepts involved in the detection of food contaminants in terms of the advantages and disadvantages of the commonly used analytical methods (e.g., DNA-based methods (PCR/real-time PCR/multiplex PCR/digital PCR) and protein-based methods (enzyme-linked immunosorbent assay/immunochromatography assay/immunosensor/mass spectrometry). Afterward, the progress in aptamer-functionalized MOF biosensors is discussed with respect to the sensing mechanisms (e.g., the role of MOFs as signal probes and carriers for loading signal probes) along with their performance evaluation (e.g., in terms of sensitivity). We finally discuss challenges and opportunities associated with the development of aptamer-functionalized MOFs for the measurement of food contaminants.

Potential of nonporous adaptive crystals for hydrocarbon separation

Hydrocarbon separation is an important process in the field of petrochemical industry, which provides a variety of raw materials for industrial production and a strong support for the development of national economy. However, traditional separation processes involve huge energy consumption. Adsorptive separation based on nonporous adaptive crystal (NAC) materials is considered as an attractive green alternative to traditional energy-intensive separation technologies due to its advantages of low energy consumption, high chemical and thermal stability, excellent selective adsorption and separation performance, and outstanding recyclability. Considering the exceptional potential of NAC materials for hydrocarbon separation, this review comprehensively summarizes recent advances in various supramolecular host-based NACs. Moreover, the current challenges and future directions are illustrated in detail. It is expected that this review will provide useful and timely references for researchers in this area. Based on a large number of state-of-the-art studies, the review will definitely advance the development of NAC materials for hydrocarbon separation and stimulate more interesting studies in related fields.

Efficient separation of monobromotoluene isomers by nonporous adaptive perbromoethylated pillar[5]arene crystals

Herein we report an efficient adsorptive separation approach for monobromotoluene isomers using nonporous adaptive crystals of perbromoethylated pillar[5]arene (BrP5). The purity of separated m-bromotoluene from an equal volume mixture of m-bromotoluene and o-bromotoluene reaches 96.6% in one cycle and the adsorbent BrP5 can be reused without losing separation performance.

A Mini Review of Ceramic-Based MOF Membranes for Water Treatment

Ceramic membranes have been increasingly employed in water treatment owing to their merits such as high-stability, anti-oxidation, long lifespan and environmental friendliness. The application of ceramic membranes mainly focuses on microfiltration and ultrafiltration processes, and some precise separation can be achieved by introducing novel porous materials with superior selectivity. Recently, metal-organic frameworks (MOFs) have developed a wide spectrum of applications in the fields of the environment, energy, water treatment and gas separation due to the diversity and tunable advantages of metal clusters and organic ligands. Although the issue of water stability in MOF materials inhibits the development of MOF membranes in water treatment, researchers still overcome many obstacles to advance the application of MOF membranes in water treatment processes. To the best of our knowledge, there is still a lack of a reviews on the development process and prospects of ceramic-based MOF membranes for water treatment. Therefore, in this review, we mainly summarize the fabrication method for ceramic-based MOF membranes and their application in water treatment, such as water/salt separation, pollutant separation, heavy metal separation, etc. Following this, based on the high structural, thermal and chemical stability of ceramic substrates, and the high controllability of MOF materials, the superiority and insufficient use of ceramic-based MOF membranes in the field of water treatment are critically discussed.

Tetrahedral Imidazolate Frameworks with Auxiliary Ligands (TIF-Ax): Synthetic Strategies and Applications

Zeolitic imidazolate frameworks (ZIFs) are an important subclass of metal-organic frameworks (MOFs). Recently, we reported a new kind of MOF, namely tetrahedral imidazolate frameworks with auxiliary ligands (TIF-Ax), by adding linear ligands (Hint) into the zinc-imidazolate system. Introducing linear ligands into the M2+-imidazolate system overcomes the limitation of imidazole derivatives. Thanks to the synergistic effect of two different types of ligands, a series of new TIF-Ax with interesting topologies and a special pore environment has been reported, and they have attracted extensive attention in gas adsorption, separation, catalysis, heavy metal ion capture, and so on. In this review, we give a comprehensive overview of TIF-Ax, including their synthesis methods, structural diversity, and multi-field applications. Finally, we also discuss the challenges and perspectives of the rational design and syntheses of new TIF-Ax from the aspects of their composition, solvent, and template. This review provides deep insight into TIF-Ax and a reference for scholars with backgrounds of porous materials, gas separation, and catalysis.

Growth mechanisms of monolayer hexagonal boron nitride (h-BN) on metal surfaces: theoretical perspectives

Two-dimensional hexagonal boron nitride (h-BN) has appeared as a promising material in diverse areas of applications, including as an excellent substrate for graphene devices, deep-ultraviolet emitters, and tunneling barriers, thanks to its outstanding stability, flat surface, and wide-bandgap. However, for achieving such exciting applications, controllable mass synthesis of high-quality and large-scale h-BN is a precondition. The synthesis of h-BN on metal surfaces using chemical vapor deposition (CVD) has been extensively studied, aiming to obtain large-scale and high-quality materials. The atomic-scale growth process, which is a prerequisite for rationally optimizing growth circumstances, is a key topic in these investigations. Although theoretical investigations on h-BN growth mechanisms are expected to reveal numerous new insights and understandings, different growth methods have completely dissimilar mechanisms, making theoretical research extremely challenging. In this article, we have summarized the recent cutting-edge theoretical research on the growth mechanisms of h-BN on different metal substrates. On the frequently utilized Cu substrate, h-BN development was shown to be more challenging than a simple adsorption-dehydrogenation-growth scenario. Controlling the number of surface layers is also an important challenge. Growth on the Ni surface is controlled by precipitation. An unusual reaction-limited aggregation growth behavior has been seen on interfaces having a significant lattice mismatch to h-BN. With intensive theoretical investigations employing advanced simulation approaches, further progress in understanding h-BN growth processes is predicted, paving the way for guided growth protocol design.

Zeolites and metal-organic frameworks for gas separation: the possibility of translating adsorbents into membranes

Zeolites and metal-organic frameworks (MOFs) represent an attractive class of crystalline porous materials that possesses regular pore structures. The inherent porosity of these materials has led to an increasing focus on gas separation applications, encompassing adsorption and membrane separation techniques. Here, a brief overview of the critical properties and fabrication approaches for zeolites and MOFs as adsorbents and membranes is given. The separation mechanisms, based on pore sizes and the chemical properties of nanochannels, are explored in depth, considering the distinct characteristics of adsorption and membrane separation. Recommendations for judicious selection and design of zeolites and MOFs for gas separation purposes are emphasized. By examining the similarities and differences between the roles of nanoporous materials as adsorbents and membranes, the feasibility of zeolites and MOFs from adsorption separation to membrane separation is discussed. With the rapid development of zeolites and MOFs towards adsorption and membrane separation, challenges and perspectives of this cutting-edge area are also addressed.

Heat-driven molecule gatekeepers in MOF membrane for record-high H2 selectivity

Hydrogen/carbon dioxide (H₂/CO₂) separation for sustainable energy is in desperate need of reliable membranes at high temperatures. Molecular sieve membranes take their nanopores to differentiate sizes between H₂ and CO₂ but have compromised at a marked loss of selectivity at high temperatures owing to diffusion activation of CO₂. We used molecule gatekeepers that were locked in the cavities of the metal-organic framework membrane to meet this challenge. Ab initio calculations and in situ characterizations demonstrate that the molecule gatekeepers make a notable move at high temperatures to dynamically reshape the sieving apertures as being extremely tight for CO₂ and restitute with cool conditions. The H₂/CO₂ selectivity was improved by an order of magnitude at 513 kelvin (K) relative to that at the ambient temperature.

Assembling Triphenylene-Based Metal-Organic Framework Nanosheets at the Air/Liquid Interface: Modification by Tuning the Spread Solution Concentration

Metal-organic frameworks (MOFs)─crystalline coordination polymers─with unique characteristics such as structural designability accompanied by tunable electronic properties and intrinsic uniform nanopores have become the platform for applications in diverse scientific areas ranging from nanotechnology to energy/environmental sciences. To utilize the superior features of MOF in potential applications, the fabrication and integration of thin films are of importance and have been actively sought. Especially, downsized MOFs into nanosheets can act as ultimately thin functional components in nanodevices and potentially display unique chemical/physical properties rarely seen in bulk MOFs. Assembling nanosheets by aligning amphiphilic molecules at the air/liquid interface has been known as the Langmuir technique. By utilizing the air/liquid interface as a reaction field between metal ions and organic ligands, MOFs are readily formed into the nanosheet state. The expected features in MOF nanosheets including electrical conduction largely depend on the nanosheet characteristics such as lateral size, thickness, morphology, crystallinity, and orientation. However, their control has not been achieved as yet. Here, we demonstrate how changing the concentration of a ligand spread solution can modify the assembly of MOF nanosheets, composed of 2,3,6,7,10,11-hexaiminotriphenylene (HITP) and Ni²⁺ ions (HITP-Ni-NS), at the air/liquid interface. A systematic increase in the concentration of the ligand spread solution leads to the enlargement of both the lateral size and the thickness of the nanosheets while retaining their perfect alignment and preferred orientation. On the other hand, at much higher concentrations, we find that unreacted ligand molecules are included in HITP-Ni-NS, introducing disorder in HITP-Ni-NS. These findings can develop further sophisticated control of MOF nanosheet features, accelerating fundamental and applied studies on MOFs.

Exfoliation of a Two-Dimensional Metal-Organic Framework for Enhanced Photocatalytic CO2 Reduction

A two-dimensional metal-organic framework, FICN-12, was constructed from tris[4-(1H-pyrazole-4-yl)phenyl]amine (H₃TPPA) ligands and Ni₂ secondary building units. The triphenylamine moiety in the H₃TPPA ligand readily absorbs UV-visible photons and sensitizes the Ni center to drive photocatalytic CO₂ reduction. FICN-12 can be exfoliated into monolayer and few-layer nanosheets with a "top-down" approach, which exposes more catalytic sites and increases its catalytic activity. As a result, the nanosheets (FICN-12-MONs) showed photocatalytic CO and CH₄ production rates of 121.15 and 12.17 μmol/g/h, respectively, nearly 1.4 times higher than those of bulk FICN-12.