Metal Nanotubule Membranes with Electrochemically Switchable Ion-Transport Selectivity

2D Conjugated Metal-Organic Framework-Based Composite Membranes for Nanofluidic Ionic Photoelectric Conversion

Nanofluidic photoelectric conversion system based on photo-excitable 2D materials can directly transduce light stimuli into an ion-transport-mediated electric signal, showing potential for mimicking the retina's function with a more favorable human-robot interactions. However, the current membranes suffer from low generation efficiency of charge carriers due to the mixed microstructure and limited charge transport ability caused by the large interlayer spacing and monotonous pathway. Here, a fully conjugated 2D hexaimino-substituted triphenylene-based metal-organic framework (2D-HATP-cMOF) based composite membrane with high conductivity for photoelectric conversion is presented. The extended π-d conjugation within the ab plane and the favorable transport pathway through π-π stacking of the c-MOF maximize the generation and transfer of charge carrier and greatly accelerate the ion transport. As a result, the 2D-HATP-cMOF-based composite membrane possesses ultrafast photoelectric response, superior to other reported 2D systems like graphene oxide (GO), transition metal carbides, carbonitrides and nitrides (MXene), and MoS2, which require at least 10 s. A successful ion pump phenomenon, that is active transport from low concentration to high concentration as an important way of information transmission in organisms, is realized based on the efficient photoelectric conversion capability. This work demonstrates the great promise of 2D c-MOF in ionic photoelectric conversion.

Nanoporous air filtering systems made from renewable sources: benefits and challenges

There is a crucial need for air purification systems due to increasing air contamination, while conventional air-filtering materials face challenges in eliminating gaseous and particulate pollutants. This review examines the development and characteristics of nanoporous polymeric materials developed from renewable resources, which have rapidly advanced in recent years. These materials offer more sustainable alternatives for nanoporous structures made out of conventional polymers and significantly impact the properties of porous polymers. The review explores nanoporous materials' production from renewable sources, filtering mechanisms, physicochemical makeup, and sensing capabilities. The recent advancements in this field aim to enhance production techniques, lower pressure drop, and improve adsorption efficiency. Currently, supporting approaches include using adsorbent layers and binders to immobilize nanoporous materials. Furthermore, the prospects and challenges of nanoporous materials obtained from renewable sources used for air purification are discussed.

Potentiometric Studies on Ion-Transport Selectivity in Charged Gold Nanotubes

Under ideal conditions, nanotubes with a fixed negative tube-wall charge will reject anions and transport-only cations. Because many proposed nanofluidic devices are optimized in this ideally cation-permselective state, it is important to know the experimental conditions that produce ideal responses. A parameter called Ccrit, the highest salt concentration in a contacting solution that still produces ideal cation permselectivity, is of particular importance. Pioneering potentiometric studies on gold nanotubes were interpreted using an electrostatic model that states that Ccrit should occur when the Debye length in the contacting salt solution becomes equivalent to the tube radius. Since this "double-layer overlap model" (DLOM), treats all same-charge ions as identical point charges, it predicts that all same-charged cations should produce the same Ccrit. However, the effect of cation on Ccrit in gold nanotubes was never investigated. This knowledge gap has become important because recent studies with a polymeric cation-permselective nanopore membrane showed that DLOM failed for every cation studied. To resolve this issue, we conducted potentiometric studies on the effect of salt cation on Ccrit for a 10 nm diameter gold nanotube membrane. Ccrit for all cations studied were, within experimental error, the same and identical, with values predicted by DLOM. The reason DLOM prevailed for the gold nanotubes but failed for the polymeric nanopores stems from the chemical difference between the fixed negative charges of these two membranes.

Broken symmetries in quasi-2D charged systems via negative dielectric confinement

We report spontaneous symmetry breaking (SSB) phenomena in symmetrically charged binary particle systems under planar nanoconfinement with negative dielectric constants. The SSB is triggered solely via the dielectric confinement effect, without any external fields. The mechanism of SSB is found to be caused by the strong polarization field enhanced by nanoconfinement, giving rise to charge/field oscillations in the transverse directions. Interestingly, dielectric contrast can even determine the degree of SSB in transverse and longitudinal dimensions, forming charge-separated interfacial liquids and clusters on square lattices. Furthermore, we analytically show that the formed lattice constant is determined by the dielectric mismatch and the length scale of confinement, which is validated via molecular dynamics simulations. The novel broken symmetry mechanism may provide new insights into the study of quasi-2D systems and the design of future nanodevices.

Photosynthetic-Membrane-Like Ion Translocation in Visible-Light-Harvesting Nanofluidic Channels

The selective uphill and downhill movement of protons in and out of photosynthetic membrane enabled by ion pumps and ion channels is key to photosynthesis. Reproducing the functions of photosynthetic membranes in artificial systems has been a persistent goal. Here, a visible-light-harvesting nanofluidic channels is reported which experimentally demonstrates the ion translocation functions of photosynthetic membranes. A molecular junction consisting of photosensitive ruthenium complexes linked to TiO2 electron acceptors forms the reaction centers in the nanofluidic channels. The visible-light-triggered vectorial electron injection into TiO2 establishes a difference in transmembrane potential across the channels, which enables uphill transport of ions against a 5-fold concentration gradient. In addition, the asymmetric charge distribution across the channels enables the unidirectional downhill movement of ions, demonstrating an ion rectification effect with a ratio of 18:1. This work, for the first time, mimics both the uphill and downhill ion translocation functions of photosynthetic membranes, which lays a foundation for nanofluidic energy conversion.

Effect of Organic Cation Adsorption on Ion-Transport Selectivity in a Cation-Permselective Nanopore Membrane

A key knowledge gap in the emerging field of nanofluidics concerns how the ionic composition and ion-transport properties of a nanoconfined solution differ from those of a contacting bulk solution. We and others have been using potentiometric concentration cells, where a nanopore or nanotube membrane separates salt solutions of differing concentrations to explore this issue. The membranes studied contained a fixed pore/tube wall anionic charge, which ideally would prohibit anions and salt from entering the pore/tube-confined solution. We have been investigating experimental conditions that allow for this ideally permselective cation state to be achieved. Results of potentiometric investigations of a polymeric nanopore membrane (10 ± 2 nm-diameter pores) with anionic charge due to carbonate are presented here. While studies of this type have been reported using alkaline metal and alkaline earth cations, there have been no analogous studies using organic cations. This paper uses a homologous series of tetraalkylammonium ions to address this knowledge gap. The key result is that, in contrast to the inorganic cations, the ideal cation-permselective state could not be obtained under any experimental conditions for the organic cations. We propose that this is because these hydrophobic cations adsorb onto the polymeric pore walls. This makes ideality impossible because each adsorbed alkylammonium must bring a charge-balancing anion, Cl-, with it into the nanopore solution. The alkylammonium adsorption that occurred was confirmed and quantified by using surface contact angle measurements.

Advances in nanofluidic field-effect transistors: external voltage-controlled solid-state nanochannels for stimulus-responsive ion transport and beyond

Ion channels, intricate protein structures facilitating precise ion passage across cell membranes, are pivotal for vital cellular functions. Inspired by the remarkable capabilities of biological ion channels, the scientific community has ventured into replicating these principles in fully abiotic solid-state nanochannels (SSNs). Since the gating mechanisms of SSNs rely on variations in the physicochemical properties of the channel surface, the modification of their internal architecture and chemistry constitutes a powerful strategy to control the transport properties and, consequently, render specific functionalities. In this framework, both the design of the nanofluidic platform and the subsequent selection and attachment of different building blocks gain special attention. Similar to biological ion channels, functional SSNs offer the potential to finely modulate ion transport in response to various stimuli, leading to innovations in a variety of fields. This comprehensive review delves into the intricate world of ion transport across stimuli-responsive SSNs, focusing on the development of external voltage-controlled nanofluidic devices. This kind of field-effect nanofluidic technology has attracted special interest due to the possibility of real-time reconfiguration of the ion transport with a non-invasive strategy. These properties have found interesting applications in drug delivery, biosensing, and nanoelectronics. This document will address the fundamental principles of ion transport through SSNs and the construction, modification, and applications of external voltage-controlled SSNs. It will also address future challenges and prospects, offering a comprehensive perspective on this evolving field.

Bio-Inspired Subnanofluidics: Advanced Fabrication and Functionalization

Biological ion channels can realize high-speed and high-selective ion transport through the protein filter with the sub-1-nanometer channel. Inspired by biological ion channels, various kinds of artificial subnanopores, subnanochannels, and subnanoslits with improved ion selectivity and permeability are recently developed for efficient separation, energy conversion, and biosensing. This review article discusses the advanced fabrication and functionalization methods for constructing subnanofluidic pores, channels, tubes, and slits, which have shown great potential for various applications. Novel fabrication methods for producing subnanofluidics, including top-down techniques such as electron beam etching, ion irradiation, and electrochemical etching, as well as bottom-up approaches starting from advanced microporous frameworks, microporous polymers, lipid bilayer embedded subnanochannels, and stacked 2D materials are well summarized. Meanwhile, the functionalization methods of subnanochannels are discussed based on the introduction of functional groups, which are classified into direct synthesis, covalent bond modifications, and functional molecule fillings. These methods have enabled the construction of subnanochannels with precise control of structure, size, and functionality. The current progress, challenges, and future directions in the field of subnanofluidic are also discussed.

Structure Evolution of Iron (Hydr)oxides under Nanoconfinement and Its Implication for Water Treatment

In the development of nanoenabled technologies for large-scale water treatment, immobilizing nanosized functional materials into the confined space of suitable substrates is one of the most effective strategies. However, the intrinsic effects of nanoconfinement on the decontamination performance of nanomaterials, particularly in terms of structural modulation, are rarely unveiled. Herein, we investigate the structure evolution and decontamination performance of iron (hydr)oxide nanoparticles, a widely used material for water treatment, when confined in track-etched (TE) membranes with channel sizes varying from 200 to 20 nm. Nanoconfinement drives phase transformation from ferrihydrite to goethite, rather than to hematite occurring in bulk systems, and the increase in the nanoconfinement degree from 200 to 20 nm leads to a significant drop in the fraction of the goethite phase within the aged products (from 41% to 0%). The nanoconfinement configuration is believed to greatly slow down the phase transformation kinetics, thereby preserving the specific adsorption of ferrihydrite toward As(V) even after 20-day aging at 343 K. This study unravels the structure evolution of confined iron hydroxide nanoparticles and provides new insights into the temporospatial effects of nanoconfinement on improving the water decontamination performance.

Amphiphilic Polyampholytes for Fouling-Resistant and Easily Tunable Membranes

The versatility of membranes is limited by the narrow range of material chemistries on the market, which cannot address many relevant separations. Expanding their use requires new membrane materials that can be tuned to address separations by providing the desired selectivity and robustness. Self-assembly is a versatile and scalable approach to create tunable membranes with a narrow pore size distribution. This study reports the first examples of a new class of membrane materials that derives state-of-the-art permeability, selectivity, and fouling resistance from the self-assembly of random polyampholyte amphiphilic copolymers. These membranes feature a network of ionic nanodomains that serve as nanochannels for water permeation, framed by hydrophobic nanodomains that preserve their structural integrity. This copolymer design approach enables precise selectivity control. For example, sodium sulfate rejections can be tuned from 5% to 93% with no significant change in the pore size or fouling resistance. Membranes developed here have potential applications in wastewater treatment and chemical separations.

Modelling the Performance of Electrically Conductive Nanofiltration Membranes

Electrically conductive membranes are a class of stimuli-responsive materials, which allow the adjustment of selectivity for and the rejection of charged species by varying the surface potential. The electrical assistance provides a powerful tool for overcoming the selectivity-permeability trade-off due to its interaction with charged solutes, allowing the passage of neutral solvent molecules. In this work, a mathematical model for the nanofiltration of binary aqueous electrolytes by an electrically conductive membrane is proposed. The model takes into account the steric as well as Donnan exclusion of charged species due to the simultaneous presence of chemical and electronic surface charges. It is shown that the rejection reaches its minimum at the potential of zero charge (PZC), where the electronic and chemical charges compensate for each other. The rejection increases when the surface potential varies in positive and negative directions with respect to the PZC. The proposed model is successfully applied to a description of experimental data on the rejection of salts and anionic dyes by PANi-PSS/CNT and MXene/CNT nanofiltration membranes. The results provide new insights into the selectivity mechanisms of conductive membranes and can be employed to describe electrically enhanced nanofiltration processes.

Biphasic concentration patterns in ionic transport under nanoconfinement revealed in steady-state and time-dependent properties

Ion permeation across nanoscopic structures differs considerably from microfluidics because of strong steric constraints, transformed solvent properties, and charge-regulation effects revealed mostly in diluted solutions. However, little is known about nanofluidics in moderately concentrated solutions, which are critically important for industrial applications and living systems. Here, we show that nanoconfinement triggers general biphasic concentration patterns in a myriad of ion transport properties by using two contrasting systems: a biological ion channel and a much larger synthetic nanopore. Our findings show a low-concentration regime ruled by classical Debye screening and another one where ion-ion correlations and enhanced ion-surface interactions contribute differently to each electrophysiological property. Thus, different quantities (e.g., conductance vs noise) measured under the same conditions may appear contradictory because they belong to different concentration regimes. In addition, non-linear effects that are barely visible in bulk conductivity only in extremely concentrated solutions become apparent in nanochannels around physiological conditions.

Electrochemically addressed FET-like nanofluidic channels with dynamic ion-transport regimes

Nanofluidic channels in which the ionic transport can be modulated by the application of an external voltage to the nanochannel walls have been described as nanofluidic field effect transistors (nFETs) because of their analogy with electrolyte-gated field effect transistors. The creation of nFETs is attracting increasing attention due to the possibility of controlling ion transport by using an external voltage as a non-invasive stimulus. In this work, we show that it is possible to extend the actuation range of nFETs by using the supporting electrolyte as a "chemical effector". For this aim, a gold-coated poly(ethylene terephthalate) (PET) membrane was modified with electroactive poly-o-aminophenol. By exploiting the interaction between the electroactive poly-o-aminophenol and the ions in the electrolyte solution, the magnitude and surface charge of the nanochannels were fine-tuned. In this way, by setting the electrolyte nature it has been possible to set different ion transport regimes, i.e.: cation-selective or anion-selective ion transport, whereas the rectification efficiency of the ionic transport was controlled by the gate voltage applied to the electroactive polymer layer. Remarkably, under both regimes, the platform displays a reversible and rapid response. We believe that this strategy to preset the actuation range of nFETs by using the supporting electrolyte as a chemical effector can be extended to other devices, thus offering new opportunities for the development of stimulus-responsive solid-state nanochannels.

Characterizing the Interactions of Cell Membrane-Disrupting Peptides with Lipid-Functionalized Single-Walled Carbon Nanotube Systems for Antimicrobial Screening

Lipid-functionalized single-walled carbon nanotubes (SWNTs) have garnered significant interest for their potential use in a wide range of biomedical applications. In this work, we used molecular dynamics simulations to study the equilibrium properties of SWNTs surrounded by the phosphatidylcholine (POPC) corona phase, and their interactions with three cell membrane disruptor peptides: colistin, TAT peptide, and crotamine-derived peptide. Our results show that SWNTs favor asymmetrical positioning within the POPC corona, so that one side of the SWNT, covered by the thinnest part of the corona, comes in contact with charged and polar functional groups of POPC and water. We also observed that colistin and TAT insert deeply into POPC corona, while crotamine-derived peptide only adsorbs to the corona surface. Compared to crotamine-derived peptide, colistin and TAT also induce larger perturbations in the thinnest region of the corona, by allowing more water molecules to directly contact the SWNT surface. In separate simulations, we show that three examined peptides exhibit similar insertion and adsorption behaviors when interacting with POPC bilayers, confirming that peptide-induced perturbations to POPC in conjugates and bilayers are similar in nature and magnitude. Furthermore, we observed correlations between the peptide-induced structural perturbations and the near-infrared emission of the lipid-functionalized SWNTs, which suggest that the optical signal of the conjugates transduces the morphological changes in the lipid corona. Overall, our findings indicate that lipid-functionalized SWNTs could serve as simplified cell membrane model systems for pre-screening of new antimicrobial compounds that disrupt cell membranes.

Analyses of Pore-Size-Dependent Ionic Transport in Nanopores in the Presence of Concentration and Temperature Gradients

Mass transport through nanopores occurs in various natural systems, including the human body. For example, ion transport across nerve cell membranes plays a significant role in neural signal transmission, which can be significantly affected by the electrolyte and temperature conditions. To better understand and control the underlying nanoscopic transport, it is necessary to develop multiphysical transport models as well as validate them using enhanced experimental methods for facile nanopore fabrication and precise nanoscale transport characterization. Here, we report a nanopore-integrated microfluidic platform to characterize ion transport in the presence of electrolyte and temperature gradients; we employ our previous self-assembled particle membrane (SAPM)-integrated microfluidic platform to produce various nanopores with different pore sizes. Subsequently, we quantify pore-size-dependent ionic transport by measuring the short circuit current (SCC) and open circuit voltage (OCV) across various nanopores by manipulating the electrolyte and temperature gradients. We establish three simple theoretical models that heavily depend on pore size, electrolyte concentration, and temperature and subsequently validate them with the experimental results. Finally, we anticipate that the results of this study would help clarify ion transport phenomena at low-temperature conditions, not only providing a fundamental understanding but also enabling practical applications of cryo-anesthesia in the near future.

Ion Current Rectification and Long-Range Interference in Conical Silicon Micropores

Fluidic devices exhibiting ion current rectification (ICR), or ionic diodes, are of broad interest for applications including desalination, energy harvesting, and sensing, among others. For such applications a large conductance is desirable, which can be achieved by simultaneously using thin membranes and wide pores. In this paper we demonstrate ICR in micrometer sized conical channels in a thin silicon membrane with pore diameters comparable to the membrane thickness but both much larger than the electrolyte screening length. We show that for these pores the entrance resistance is key not only to Ohmic conductance around 0 V but also for understanding ICR, both of which we measure experimentally and capture within a single analytic theoretical framework. The only fit parameter in this theory is the membrane surface potential, for which we find that it is voltage dependent and its value is excessively large compared to the literature. From this we infer that surface charge outside the pore strongly contributes to the observed Ohmic conductance and rectification by a different extent. We experimentally verify this hypothesis in a small array of pores and find that ICR vanishes due to pore-pore interactions mediated through the membrane surface, while Ohmic conductance around 0 V remains unaffected. We find that the pore-pore interaction for ICR is set by a long-ranged decay of the concentration which explains the surprising finding that the ICR vanishes for even a sparsely populated array with a pore-pore spacing as large as 7 μm.

Cation-Selective Oxide Semiconductor Mesoporous Membranes for Biomimetic Ion Rectification and Light-Powered Ion Pumping

Artificial membranes precisely imitating the biological functions of ion channels and ion pumps have attracted significant attention to explore nanofluidic energy conversion. Herein, inspired by the cyclic ion transport for the photosynthesis in purple bacteria, a bilayer inorganic membrane (TiO₂ /AAO) composed of oxide semiconductor (TiO₂ ) mesopores on anodic alumina (AAO) macropores is we developed. This inorganic membrane achieves the functions of ion channels and ion pumps, including the ion rectification and light-powered ion pumping. The asymmetric charge distribution across the bilayer membrane contributes to the cationic selectivity and ion rectification characteristics. The electrons induced by ultraviolet irradiation introduce a built-in electric field across TiO₂ /AAO membrane, which pumps the active ion transport from a low to a high concentration. This work integrates the functions of biological ion channels and ion pumps within an artificial membrane for the first time, which paves the way to explore multifunctional membranes analogous to its biological counterpart.

Geometrically Induced Selectivity and Unidirectional Electroosmosis in Uncharged Nanopores

Selectivity toward positive and negative ions in nanopores is often associated with electroosmotic flow, the control of which is pivotal in several micro-nanofluidic technologies. Selectivity is traditionally understood to be a consequence of surface charges that alter the ion distribution in the pore lumen. Here we present a purely geometrical mechanism to induce ionic selectivity and electroosmotic flow in uncharged nanopores, and we tested it via molecular dynamics simulations. Our approach exploits the accumulation of charges, driven by an external electric field, in a coaxial cavity that decorates the membrane close to the pore entrance. The selectivity was shown to depend on the applied voltage and becomes completely inverted when reversing the voltage. The simultaneous inversion of ionic selectivity and electric field direction causes a unidirectional electroosmotic flow. We developed a quantitatively accurate theoretical model for designing pore geometry to achieve the desired electroosmotic velocity. Finally, we show that unidirectional electroosmosis also occurs in much more complex scenarios, such as a biological pore whose structure presents a coaxial cavity surrounding the pore constriction as well as a complex surface charge pattern. The capability to induce ion selectivity without altering the pore lumen shape or the surface charge may be useful for a more flexible design of selective membranes.

The Ionic Composition and Chemistry of Nanopore-Confined Solutions

There is increasing interest in understanding the properties of solutions confined within nanotubes and synthetic or biological nanopores. How the ionic content of a nanopore-confined solution differs from that of a contacting bulk salt solution is of particular importance, for example, to water desalinization, industrial electrolysis, and all living systems. This paper explores ionic content, ionic interactions, and ion-transport properties of solutions confined within the 10 nm diameter pores of a synthetic polymer membrane. The membrane has a fixed negative pore-wall and surface charge due to ionizable carbonate groups. As a result, under some conditions, the nanopore-confined solution contains only cations and no anions or salt present in a contacting solution, ideal cation permselectivity. This anion- and salt-rejecting ability varies greatly with the cation of the salt, a result that is in contradiction to the prevailing model for permselectivity in nanopores. The extant model fails because it does not account for specific chemical interactions between the cation and the carbonate groups. The nature of these ion-selective interactions is discussed here.

Real-Time In Situ Monitoring of CO2 Electroreduction in the Liquid and Gas Phases by Coupled Mass Spectrometry and Localized Electrochemistry

The mechanism and dynamics of the CO₂ reduction reaction (CO₂RR) remain poorly understood, which is largely caused by mass transport limitations and lack of time-correlated product analysis tools. In this work, a custom-built gas accessible membrane electrode (GAME) system is used to comparatively assess the CO₂RR behavior of Au and Au−Cu catalysts. The platform achieves high reduction currents (∼ – 50 mA cm^–2 at 1.1 V vs RHE) by creating a three-phase boundary interface equipped with an efficient gas-circulation pathway, facilitating rapid mass transport of CO₂. The GAME system can also be easily coupled with many other analytical techniques as exemplified by mass spectrometry (MS) and localized ultramicroelectrode (UME) voltammetry to enable real-time and in situ product characterization in the gas and liquid phases, respectively. The gaseous product distribution is explicitly and quantitatively elucidated with high time resolution (on the scale of seconds), allowing for the independent assessment of Tafel slope estimates for the hydrogen (159/168 mV decade^–1), ethene (160/170 mV decade^–1), and methane (96/100 mV decade^–1) evolution reactions. Moreover, the UME is used to simultaneously measure the local pH shift during CO₂RR and assess the production of liquid phase species including formate. A positive shift of 0.8 pH unit is observed at a current density of −11 mA cm^–2 during the CO₂RR.

Pushing the limits of nanopore transport performance by polymer functionalization

Inspired by the design and performance of biological pores, polymer functionalization of nanopores has emerged as an evolving field to advance transport performance within the last few years. This feature article outlines developments in nanopore functionalization and the resulting transport performance including gating based on electrostatic interaction, wettability and ligand binding, gradual transport controlled by polymerization as well as functionalization-based asymmetric nanopore and nanoporous material design going towards the transport direction. Pushing the limits of nanopore transport performance and thus reducing the performance gap between biological and technological pores is strongly related to advances in polymerization chemistry and their translation into nanopore functionalization. Thereby, the effect of the spatial confinement has to be considered for polymer functionalization as well as for transport regulation, and mechanistic understanding is strongly increased by combining experiment and theory. A full mechanistic understanding together with highly precise nanopore structure design and polymer functionalization is not only expected to improve existing application of nanoporous materials but also opens the door to new technologies. The latter might include out of equilibrium devices, ionic circuits, or machine learning based sensors.

Light-Powered Ion Pumping in a Cation-Selective Conducting Polymer Membrane

The simulation of the ion pumping against a proton gradient energized by light in photosynthesis is of significant importance for the energy conversion in a non-biological environment. Herein, we report light-powered ion pumping in a polystyrene sulfonate anion (PSS) doped polypyrrole (PPy) conducting polymer membrane (PSS-PPy) with a symmetric geometry. This PSS-PPy conducting polymer membrane exhibits a cationic selectivity and a light-responsive surface-charge-governed ion transport attributed to the negatively charged PSS groups. An asymmetric visible irradiation on one side of the PSS-PPy membrane induces a built-in electric field across the membrane due to the intrinsic photoelectronic property of PPy, which drives the cationic transport against the concentration gradient, demonstrating an ion-pumping effect. This work is a prototype that uses a geometry-symmetric conducting polymer membrane as a light-powered artificial ion pump for active ion transport, which exhibits potential applications in nanofluidic energy conversion.

Selective Fluoride Transport in Subnanometer TiO2 Pores

Synthesizing nanopores which mimic the functionality of ion-selective biological channels has been a challenging yet promising approach to advance technologies for precise ion-ion separations. Inspired by the facilitated fluoride (F^-) permeation in the biological fluoride channel, we designed a highly fluoride-selective TiO₂ film using the atomic layer deposition (ALD) technique. The subnanometer voids within the fabricated TiO₂ film (4 Å < d < 12 Å, with two distinct peaks at 5.5 and 6.5 Å), created by the hindered diffusion of ALD precursors (d = 7 Å), resulted in more than eight times faster permeation of sodium fluoride compared to other sodium halides. We show that the specific Ti-F interactions compensate for the energy penalty of F^- dehydration during the partitioning of F^- ions into the pore and allow for an intrapore accumulation of F^- ions. Concomitantly, the accumulation of F^- ions on the pore walls also enhances the transport of sodium (Na⁺) cations due to electrostatic interactions. Molecular dynamics simulations probing the ion concentration and mobility within the TiO₂ pore further support our proposed mechanisms for the selective F^- transport and enhanced Na⁺ permeation in the TiO₂ film. Overall, our work provides insights toward the design of ion-selective nanopores using the ALD technique.

Silicon Carbide-Gated Nanofluidic Membrane for Active Control of Electrokinetic Ionic Transport

Manipulation of ions and molecules by external control at the nanoscale is highly relevant to biomedical applications. We report a biocompatible electrode-embedded nanofluidic channel membrane designed for electrofluidic applications such as ionic field-effect transistors for implantable drug-delivery systems. Our nanofluidic membrane includes a polysilicon electrode electrically isolated by amorphous silicon carbide (a-SiC). The nanochannel gating performance was experimentally investigated based on the current-voltage (I-V) characteristics, leakage current, and power consumption in potassium chloride (KCl) electrolyte. We observed significant modulation of ionic diffusive transport of both positively and negatively charged ions under physical confinement of nanochannels, with low power consumption. To study the physical mechanism associated with the gating performance, we performed electrochemical impedance spectroscopy. The results showed that the flat band voltage and density of states were significantly low. In light of its remarkable performance in terms of ionic modulation and low power consumption, this new biocompatible nanofluidic membrane could lead to a new class of silicon implantable nanofluidic systems for tunable drug delivery and personalized medicine.

Influence of the Exclusion-Enrichment Effect on Ion Transport in Two-Dimensional Molybdenum Disulfide Membranes

Two-dimensional (2D) nanosheet membranes have been widely studied for water and wastewater treatment. However, mass transport inside 2D nanosheet membranes is far from being fully understood, and suitable applications of these membranes are yet to be identified. In this study, we investigate ion transport inside a 2D molybdenum disulfide (MoS₂) membrane by combining experimental results with numerical modeling. Specifically, we analyze the influence of the electrical double layer (EDL) extension on ion diffusion in the MoS₂ membrane, and a parameter called the exclusion-enrichment coefficient (β) is introduced to quantify how the electrostatic interaction between the coions and the EDL can affect the ion diffusion. Using the model developed in this study, the β values under different experimental conditions (feed solution concentration and applied hydraulic pressure) are calculated. The results show that coion diffusion inside the membrane can be retarded since β is smaller than one. Furthermore, the underlying mechanism is explored by theoretically estimating the radial ion concentration and electrical potential distributions across the membrane nanochannel. In addition, we find that convective mass transport can weaken the exclusion-enrichment effect by increasing β. Based on the results in this study, the potential applications and feasible membrane design strategies of 2D nanosheet membranes are discussed.

Transport Phenomena in Nano/Molecular Confinements

The transport of fluid and ions in nano/molecular confinements is the governing physics of a myriad of embodiments in nature and technology including human physiology, plants, energy modules, water collection and treatment systems, chemical processes, materials synthesis, and medicine. At nano/molecular scales, the confinement dimension approaches the molecular size and the transport characteristics deviates significantly from that at macro/micro scales. A thorough understanding of physics of transport at these scales and associated fluid properties is undoubtedly critical for future technologies. This compressive review provides an elaborate picture on the promising future applications of nano/molecular transport, highlights experimental and simulation metrologies to probe and comprehend this transport phenomenon, discusses the physics of fluid transport, tunable flow by orders of magnitude, and gating mechanisms at these scales, and lists the advancement in the fabrication methodologies to turn these transport concepts into reality. Properties such as chain-like liquid transport, confined gas transport, surface charge-driven ion transport, physical/chemical ion gates, and ion diodes will provide avenues to devise technologies with enhanced performance inaccessible through macro/micro systems. This review aims to provide a consolidated body of knowledge to accelerate innovation and breakthrough in the above fields.

Selectively detecting attomolar concentrations of proteins using gold lined nanopores in a nanopore blockade sensor

Disease diagnosis at earlier stages requires the development of ultrasensitive biosensors for detecting low-abundance biomarkers in complex biological fluids within a reasonable time frame. Here, we demonstrate the development of an ultrasensitive nanopore blockade biosensor that can rapidly diagnose a model protein biomarker, prostate-specific antigen (PSA) with high selectivity. The solid-state nanopores have gold located only along the length of the nanopore whilst the rest of the membrane is silicon nitride. The orthogonal use of materials allows nanopore arrays with a different surface chemistry inside the nanopore relative to the rest of the membrane to be fabricated. The importance of this differential surface chemistry is it can improve the detection limit of nanopore blockade sensors in quantitative analysis. Based on such functionalized nanopore devices, nanopore blockade sensors lower the limit of detection by an order of magnitude and enable ultrasensitive detection of PSA as low as 80 aM. The findings from this study open new opportunities for nanopore sensors in further developments including optical detection and ultralow detection limit biosensing at complex biological fluids.

A Simulation Analysis of Nanofluidic Ion Current Rectification Using a Metal-Dielectric Janus Nanopore Driven by Induced-Charge Electrokinetic Phenomena

We propose herein a unique mechanism of generating tunable surface charges in a metal-dielectric Janus nanopore for the development of nanofluidic ion diode, wherein an uncharged metallic nanochannel is in serial connection with a dielectric nanopore of fixed surface charge. In response to an external electric field supplied by two probes located on both sides of the asymmetric Janus nanopore, the metallic portion of the nanochannel is electrochemically polarized, so that a critical junction is formed between regions with an enriched concentration of positive and negative ions in the bulk electrolyte adjacent to the conducting wall. The combined action of the field-induced bipolar induced double layer and the native unipolar double layer full of cations within the negatively-charged dielectric nanopore leads to a voltage-controllable heterogenous volumetric charge distribution. The electrochemical transport of field-induced counterions along the nanopore length direction creates an internal zone of ion enrichment/depletion, and thereby enhancement/suppression of the resulting electric current inside the Janus nanopore for reverse working status of the nanofluidic ion diode. A mathematical model based upon continuum mechanics is established to study the feasibility of the Janus nanochannel in causing sufficient ion current rectification, and we find that only a good matching between pore diameter and Debye length is able to result in a reliable rectifying functionality for practical applications. This rectification effect is reminiscent of the typical bipolar membrane, but much more flexible on account of the nature of a voltage-based control due to induced-charge electrokinetic polarization of the conducting end, which may hold promise for osmotic energy conversion wherein an electric current appears due to a difference in salt concentration. Our theoretical demonstration of a composite metal-dielectric ion-selective medium provides useful guidelines for construction of flexible on-chip platforms utilizing induced-charge electrokinetic phenomena for a high degree of freedom ion current control.

Glass/Au Composite Membranes with Gold Nanoparticles Synthesized inside Pores for Selective Ion Transport

Nanocomposite membranes have been actively developed in the last decade. The involvement of nanostructures can improve the permeability, selectivity, and anti-fouling properties of a membrane for improved filtration processes. In this work, we propose a novel type of ion-selective Glass/Au composite membrane based on porous glass (PG), which combines the advantages of porous media and promising selective properties. The latter are achieved by depositing gold nanoparticles into the membrane pores by the laser-induced liquid phase chemical deposition technique. Inside the pores, gold nanoparticles with an average diameter 25 nm were formed, which was confirmed by optical and microscopic studies. To study the transport and selective properties of the PG/Au composite membrane, the potentiometric method was applied. The uniform potential model was used to determine the surface charge from the experimental data. It was found that the formation of gold nanoparticles inside membrane pores leads to an increase in the surface charge from −2.75 mC/m² to −5.42 mC/m². The methods proposed in this work allow the creation of a whole family of composite materials based on porous glasses. In this case, conceptually, the synthesis of these materials will differ only in the selection of initial precursors.

Bioimaging using bipolar electrochemical microscopy with improved spatial resolution

In this study, we developed bipolar electrochemical microscopy (BEM) using a closed bipolar electrode (cBPE) array with an electrochemiluminescence (ECL) detecting system.

Surface coatings for solid-state nanopores

Since their introduction in 2001, solid-state nanopores have been increasingly exploited for the detection and characterization of biomolecules ranging from single DNA strands to protein complexes. A major factor that enables the application of nanopores to the analysis and characterization of a broad range of macromolecules is the preparation of coatings on the pore wall to either prevent non-specific adhesion of molecules or to facilitate specific interactions of molecules of interest within the pore. Surface coatings can therefore be useful to minimize clogging of nanopores or to increase the residence time of target analytes in the pore. This review article describes various coatings and their utility for changing pore diameters, increasing the stability of nanopores, reducing non-specific interactions, manipulating surface charges, enabling interactions with specific target molecules, and reducing the noise of current recordings through nanopores. We compare the coating methods with respect to the ease of preparing the coating, the stability of the coating and the requirement for specialized equipment to prepare the coating.

Molecular Design of Solid-State Nanopores: Fundamental Concepts and Applications

Solid-state nanopores are fascinating objects that enable the development of specific and efficient chemical and biological sensors, as well as the investigation of the physicochemical principles ruling the behavior of biological channels. The great variety of biological nanopores that nature provides regulates not only the most critical processes in the human body, including neuronal communication and sensory perception, but also the most important bioenergetic process on earth: photosynthesis. This makes them an exhaustless source of inspiration toward the development of more efficient, selective, and sophisticated nanopore-based nanofluidic devices. The key point responsible for the vibrant and exciting advance of solid nanopore research in the last decade has been the simultaneous combination of advanced fabrication nanotechnologies to tailor the size, geometry, and application of novel and creative approaches to confer the nanopore surface specific functionalities and responsiveness. Here, the state of the art is described in the following critical areas: i) theory, ii) nanofabrication techniques, iii) (bio)chemical functionalization, iv) construction of nanofluidic actuators, v) nanopore (bio)sensors, and vi) commercial aspects. The plethora of potential applications once envisioned for solid-state nanochannels is progressively and quickly materializing into new technologies that hold promise to revolutionize the everyday life.

Low-Voltage Flow-Through Electroporation Membrane and Method

Electroporation uses high electric field gradients to create pores within the membrane of living cells in order to deliver a substance, for example a gene, into the cytoplasm. To achieve such gradients, current electroporation devices deliver voltage pulses in the kV range to the cell medium. We describe here a new device based on gold-microtube membranes that can accomplish electroporation with voltage pulses that are orders of magnitude smaller, 4 V. The percentages of electroporated bacteria were found to be more than an order of magnitude higher than obtained with a commercial electroporator.

Redox-Driven Reversible Gating of Solid-State Nanochannels

The design of an electrochemically addressable nanofluidic diode is proposed, which allows tunable and nanofluidic operations via redox gating under electrochemical control. The fabrication process involves the modification of an asymmetric gold-coated solid-state nanopore with a thin layer of a redox polymer, poly(vinylferrocene) (PVFc). The composite nanochannel acts as a gate electrode by changing the electrochemical state and, consequently, the conversion/switching of ferrocene into ferricenium units upon the application of different voltages. It is shown that the electrochemical input accurately controls the surface charge density of the nanochannel walls with a predictable concomitant effect on the rectification properties. PVFc-based nanofluidic devices are able to discriminate the passage of anionic species through the nanochannel in a qualitative and quantitative manner by simply switching the redox potential of the PVFc layer. Experimental data confirmed that a rapid and reversible modulation of the ionic transport regimes can be easily attained by changing the applied potential. This applied potential plays the role of the gate voltage (V_g) in field-effect transistors (FET), so these nanofluidic channels behave as ionic FETs. Depending on the V_g values, the iontronic behavior can be switched between ohmic and diode-like regimes. We believe that this system illustrates the potential of redox-active polymers integrated into nanofluidic devices as plausible, simple, and versatile platforms to create electrochemically addressable nanofluidic devices for multiple applications.

Selective CO2 Conversion into Fuels on Nanochannels

The purpose of this research idea is to develop a method to electrochemically convert carbon dioxide into higher alcohol chains such as ethanol to be used as fuel. Electrochemical CO₂ reduction has low yields and poor product selectivity, being able to improve this reaction would have an impact in the energy and food market. We propose the use of a modified nanofluidic transistor to block reaction steps that are thermodynamically favored by constraining the kinetics of the reaction when the reaction takes place in a geometrically restricted environment with different double layer properties to those found in conventional planar electrosynthesis.

Membranes with Functionalized Nanopores for Aromaticity-Based Separation of Small Molecules

Membranes that can separate molecules of similar size based on chemical features could transform chemical manufacturing. We demonstrate membranes with functional, 1-3 nm pores prepared using a simple and scalable approach: coating a porous support with random copolymer micelles in alcohol, followed by precipitation in water and functionalization of pore surfaces. This approach was used to prepare membranes that can separate two hormones of similar size and charge, differentiated by aromaticity, mediated through π-π interactions between the aromatic solute and pore walls functionalized with phenol groups. The aromatic molecule permeates more slowly in single-solute experiments. In competitive diffusion experiments, however, it permeates 7.1 times faster than its nonaromatic analogue. This approach can be used to manufacture membranes for complex separations based on various intermolecular interactions.

Low-voltage electrostatic modulation of ion diffusion through layered graphene-based nanoporous membranes

Ion transport in nanoconfinement differs from that in bulk and has been extensively researched across scientific and engineering disciplines^1-4. For many energy and water applications of nanoporous materials, concentration-driven ion diffusion is simultaneously subjected to a local electric field arising from surface charge or an externally applied potential. Due to the uniquely crowded intermolecular forces under severe nanoconfinement (<2 nm), the transport behaviours of ions can be influenced by the interfacial electrical double layer (EDL) induced by a surface potential, with complex implications, engendering unusual ion dynamics^5-7. However, it remains an experimental challenge to investigate how such a surface potential and its coupling with nanoconfinement manipulate ion diffusion. Here, we exploit the tunable nanoconfinement in layered graphene-based nanoporous membranes to show that sub-2 nm confined ion diffusion can be strongly modulated by the surface potential-induced EDL. Depending on the potential sign, the combination and concentration of ion pairs, diffusion rates can be reversibly modulated and anomalously enhanced by 4~7 times within 0.5 volts, across a salt concentration gradient up to seawater salinity. Modelling suggests that this anomalously enhanced diffusion is related to the strong ion-ion correlations under severe nanoconfinement, and cannot be explained by conventional theoretical predictions.

Confinement generates single-crystal aragonite rods at room temperature

The topic of calcite and aragonite polymorphism attracts enormous interest from fields including biomineralization and paleogeochemistry. While aragonite is only slightly less thermodynamically stable than calcite under ambient conditions, it typically only forms as a minor product in additive-free solutions at room temperature. However, aragonite is an abundant biomineral, and certain organisms can selectively generate calcite and aragonite. This fascinating behavior has been the focus of decades of research, where this has been driven by a search for specific organic macromolecules that can generate these polymorphs. However, despite these efforts, we still have a poor understanding of how organisms achieve such selectivity. In this work, we consider an alternative possibility and explore whether the confined volumes in which all biomineralization occurs could also influence polymorph. Calcium carbonate was precipitated within the cylindrical pores of track-etched membranes, where these enabled us to systematically investigate the relationship between the membrane pore diameter and polymorph formation. Aragonite was obtained in increasing quantities as the pore size was reduced, such that oriented single crystals of aragonite were the sole product from additive-free solutions in 25-nm pores and significant quantities of aragonite formed in pores as large as 200 nm in the presence of low concentrations of magnesium and sulfate ions. This effect can be attributed to the effect of the pore size on the ion distribution, which becomes of increasing importance in small pores. These intriguing results suggest that organisms may exploit confinement effects to gain control over crystal polymorph.