Mesostructure design with gemini surfactants: supercage formation in a three-dimensional hexagonal array

Efficient optimization of the synthetic conditions for aerosol-assisted high-quality mesoporous CeO2 powders

The morphology of surfactant-assisted mesoporous metal oxides was tuned to obtain high surface-area particles by utilizing the synthetic conditions for fabricating transparent thin films through an evaporation-induced self-assembly (EISA) process. For investigating their potential applications, especially for designing heterogeneous catalysts, mesoporous metal oxides should be obtained in powder forms; however, a serious limitation associated with their reproducibility persists. Herein, along with a rapid optimization approach, starting from determining and improving chemical composition for the fabrication of mesoporous metal oxide films, an advanced approach to obtain highly porous metal oxide powders is presented using a temperature-controlled spray-drying process with step-by-step but smooth optimization by combining several EISA processes, involving the utilization of a precursor solution optimized for a slow-drying process in the case of ceria (CeO2) using poly(styrene)-block-poly(ethylene oxide) (PS-b-PEO).

Multifunctional mesoporous silica nanoparticles for biomedical applications

Mesoporous silica nanoparticles (MSNs) are recognized as a prime example of nanotechnology applied in the biomedical field, due to their easily tunable structure and composition, diverse surface functionalization properties, and excellent biocompatibility. Over the past two decades, researchers have developed a wide variety of MSNs-based nanoplatforms through careful design and controlled preparation techniques, demonstrating their adaptability to various biomedical application scenarios. With the continuous breakthroughs of MSNs in the fields of biosensing, disease diagnosis and treatment, tissue engineering, etc., MSNs are gradually moving from basic research to clinical trials. In this review, we provide a detailed summary of MSNs in the biomedical field, beginning with a comprehensive overview of their development history. We then discuss the types of MSNs-based nanostructured architectures, as well as the classification of MSNs-based nanocomposites according to the elements existed in various inorganic functional components. Subsequently, we summarize the primary purposes of surface-functionalized modifications of MSNs. In the following, we discuss the biomedical applications of MSNs, and highlight the MSNs-based targeted therapeutic modalities currently developed. Given the importance of clinical translation, we also summarize the progress of MSNs in clinical trials. Finally, we take a perspective on the future direction and remaining challenges of MSNs in the biomedical field.

Leveraging Macromolecular Isomerism for Phase Complexity in Janus Nanograins

It remains intriguing whether macromolecular isomerism, along with competing molecular interactions, could be leveraged to create unconventional phase structures and generate considerable phase complexity in soft matter. Herein, we report the synthesis, assembly, and phase behaviors of a series of precisely defined regioisomeric Janus nanograins with distinct core symmetry. They are named B₂DB₂ where B stands for iso-butyl-functionalized polyhedral oligomeric silsesquioxanes (POSS) and D stands for dihydroxyl-functionalized POSS. While BPOSS prefers crystallization with a flat interface, DPOSS prefers to phase-separate from BPOSS. In solution, they form 2D crystals owing to strong BPOSS crystallization. In bulk, the subtle competition between crystallization and phase separation is strongly influenced by the core symmetry, leading to distinct phase structures and transition behaviors. The phase complexity was understood based on their symmetry, molecular packing, and free energy profiles. The results demonstrate that regioisomerism could indeed generate profound phase complexity.

Shape-Preserving Transformation of Electrodeposited Macroporous Microparticles for Single-Particle SERS Applications

Microparticles composed of bicontinuous and ordered macropores are important in many applications. However, rational integration of ordered macropores into a single crystalline microparticle remains a challenge. Here, we report a method to prepare three-dimensionally ordered macroporous (3DOM) Ag₇O₈NO₃ micropyramids via selectively cementing the colloidal crystal templates via an electrochemical method and their shape-preserving transformation into 3DOM Ag micropryamids formed by Ag nanoparticles via a chemical reduction process. The interconnected macropores facilitated the transportation and enrichment of the analyte molecules into the 3DOM Ag micropyramids. The dense Ag nanoparticles on the skeletons of the 3DOM Ag micropyramids provided strong electromagnetic fields. Taken together, a 3DOM Ag micropyramid as a kind of single-particle surface-enhanced Raman scattering (SERS) sensing substrate demonstrated high SERS sensitivity and outstanding SERS signal reproducibility. We explored the application of 3DOM Ag micropyramids in SERS detection of biomolecules (e.g., adenosine, adenine, hemoglobin bovine, and lysozyme) and proved their potentials in distinguishing exosomes from tumor and non-tumor cells. The method can be extended to prepared 3DOM structures of other materials with promising applications in sensing, separation, and catalytic fields.

Physicochemical Properties of Monolayers of a Gemini Surfactant with a Minimal-Length Spacer

Fundamental physical chemical properties of monolayers formed from a new anionic gemini surfactant with a minimal-length (single-bond) spacer unit have been investigated at the air-water interface and compared with those of monolayers formed from affiliated comparator surfactants. The minimal spacer surfactant, dubbed C₁₈-0-C₁₈, exhibited strikingly different packing characteristics from an anionic gemini surfactant with a comparatively bulkier headgroup, including the formation of close-packed, crystalline films, and shared similar characteristics to simple fatty acid-based monolayers. Monolayers of C₁₈-0-C₁₈ also exhibited good stability at the air-water interface and transferred with reasonable efficiency to solid substrates, although the film integrity was compromised during the transfer. Results from this work suggest that the single-bond spacer approach might be more broadly useful for designing gemini surfactants that pack efficiently into ordered monolayers.

One-Pot Synthesis of Aminated Bimodal Mesoporous Silica Nanoparticles as Silver-Embedded Antibacterial Nanocarriers and CO2 Capture Sorbents

Mesoporous silica nanoparticles have highly versatile structural properties that are suitable for a plethora of applications including catalysis, separation, and nanotherapeutics. We report a one-pot synthesis strategy that generates bimodal mesoporous silica nanoparticles via coassembly of a structure-directing Gemini surfactant (C_16-3-16) with a tetraethoxysilane/(3-aminopropyl)triethoxysilane-derived sol additive. Synthesis temperature enables control of the nanoparticle shape, structure, and mesopore architecture. Variations of the aminosilane/alkylsilane molar ratio further enable programmable adjustments of hollow to core-shell and dense nanoparticle morphologies, bimodal pore sizes, and surface chemistries. The resulting Gemini-directed aminated mesoporous silica nanoparticles have excellent carbon dioxide adsorption capacities and antimicrobial properties against Escherichia coli. Our results provide an enhanced understanding of the structure formation of multiscale mesoporous inorganic materials that are desirable for numerous applications such as carbon sequestration, water remediation, and biomedical-related applications.

Engineering mesoporous silica nanoparticles for drug delivery: where are we after two decades?

The present review details a chronological description of the events that took place during the development of mesoporous materials, their different synthetic routes and their use as drug delivery systems. The outstanding textural properties of these materials quickly inspired their translation to the nanoscale dimension leading to mesoporous silica nanoparticles (MSNs). The different aspects of introducing pharmaceutical agents into the pores of these nanocarriers, together with their possible biodistribution and clearance routes, would be described here. The development of smart nanocarriers that are able to release a high local concentration of the therapeutic cargo on-demand after the application of certain stimuli would be reviewed here, together with their ability to deliver the therapeutic cargo to precise locations in the body. The huge progress in the design and development of MSNs for biomedical applications, including the potential treatment of different diseases, during the last 20 years will be collated here, together with the required work that still needs to be done to achieve the clinical translation of these materials. This review was conceived to stand out from past reports since it aims to tell the story of the development of mesoporous materials and their use as drug delivery systems by some of the story makers, who could be considered to be among the pioneers in this area.

Research on modified blast furnace dust in demulsification: The synergistic effect of ferric oxide, hydrophobic carbon, and polysilicate

Current treatment processes for the cold rolling emulsion wastewater were in the dilemma that the cost was so high while the efficiency was not satisfied in China. In this work, a novel material with high-performance demulsification was obtained and used to treat the emulsion wastewater efficiently by modifying blast furnace dust (BFD), a steel industry waste. Firstly, the BFD was characterized by various analytical techniques and the results suggested that hydrophobic functional groups, positively charged iron oxide, and polysilicon in the BFD were contributed to removing stable oil droplets. Therefore, the BFD modification was conducted accordingly by optimizing the proportion and reaction conditions of these three components. The study demonstrated that the removal rate of oil and COD_cr reached 75.21% and 81.23% under the conditions of the carbon type of GWF-HAC-R90, the carbon content of 14.86%, and the n_(Fe)/n_(Si) of 1.55, respectively. Based on this, the effects of pH, demulsifier dosage, and average agitation rate were investigated. The emulsion components before and after demulsification were analyzed by GC-MS, and the demulsification mechanism was expounded combined with kinetics. Results showed that the Fe₂O₃ with positive charge played a dominant role in emulsions with mainly anionic surfactants, while hydrophobic carbon structures and polysilicate acted as the auxiliaries. Besides, comprehensive analysis and characterization results suggested that the demulsification effect was a combination of the synergic processes: 1) electrostatic interaction developed by the anionic surfactant oil droplets and the positively charged the BFD particles; 2) hydrophobic association among the oil droplet with nonionic surfactant and amphiphilic carbon-iron complexes; 3) adsorption bridging between the surfactant oil droplets and polysilicate. The results of comparative tests in treating the actual cold-rolling emulsion wastewater showed the MBFD could bring about significant technical, economic benefits and achieve utilization of metallurgical solid wastes.Implications: Blast furnace dust (BFD) is an industrial solid waste obtained by dry de-dusting from blast furnace gas during the blast furnace ironmaking process. The main components of BFD are iron oxide and carbon, and also contain small amounts of different recoverable non-ferrous metals zinc, secret, indium and lead, which have recovery value. In this study, we enhanced the three parts of BFD and used to demulsification. In this study, the BFD was modified in three aspects (hydrophobic functional groups, positively charged iron oxide, and polysilicon) to achieve the secondary utilization of waste in emulsion wastewater treatment. And investigated the effect of reaction conditions on the demulsification effect with modified blast furnace dust (MBFD). Furthermore, the GC-MS analyzes combined with kinetics interpret the demulsification mechanism with the MBFD as a secondary resource. Finally, the comparative tests in treating the actual cold-rolling emulsion wastewater showed the MBFD could bring about significant technical and economic benefits and achieve utilization of metallurgical solid wastes.

Multiple Roles of Mesoporous Silica in Safe Pesticide Application by Nanotechnology: A Review

Pollution related to pesticides has become a global problem due to their low utilization and non-targeting application, and nanotechnology has shown great potential in promoting sustainable agriculture. Nowadays, mesoporous silica-based nanomaterials have garnered immense attention for improving the efficacy and safety of pesticides due to their distinctive advantages of low toxicity, high thermal and chemical stability, and particularly size tunability and versatile functionality. Based on the introduction of the structure and synthesis of different types of mesoporous silica nanoparticles (MSNs), the multiple roles of mesoporous silica in safe pesticide application using nanotechnology are discussed in this Review: (i) as nanocarrier for sustained/controlled delivery of pesticides, (ii) as adsorbent for enrichment or removal of pesticides in aqueous media, (iii) as support of catalysts for degradation of pesticide contaminants, and (iv) as support of sensors for detection of pesticides. Several scientific issues, strategies, and mechanisms regarding the application of MSNs in the pesticide field are presented, with their future directions discussed in terms of their environmental risk assessment, in-depth mechanism exploration, and cost-benefit consideration for their continuous development. This Review will provide critical information to related researchers and may open up their minds to develop new advances in pesticide application.

Synthesis, Characterization and Use of Mesoporous Silicas of the Following Types SBA-1, SBA-2, HMM-1 and HMM-2

Mesoporous silicas have enjoyed great interest among scientists practically from the moment of their discovery thanks to their unique attractive properties. Many types of mesoporous silicas have been described in literature, the most thoroughly MCM-41 and SBA-15 ones. The focus of this review are the methods of syntheses, characterization and use of mesoporous silicas from SBA (Santa Barbara Amorphous) and HMM (Hybrid Mesoporous Materials) groups. The first group is represented by (i) SBA-1 of three-dimensional cubic structure and Pm3n symmetry and (ii) SBA-2 of three-dimensional combined hexagonal and cubic structures and P63/mmc symmetry. The HMM group is represented by (i) HMM-1 of two-dimensional hexagonal structure and p6mm symmetry and (ii) HMM-2 of three-dimensional structure and P63/mmc symmetry. The paper provides comprehensive information on the above-mentioned silica materials available so far, also including the data for the silicas modified with metal ions or/and organic functional groups and examples of the materials applications.

Nanosized Organo-Silica Particles with "Built-In" Surface-Initiated Atom Transfer Radical Polymerization Capability as a Platform for Brush Particle Synthesis

A facile synthetic method was developed to prepare sub-5 nm organo-silica (oSiO₂) nanoparticles through the self-condensation of atom transfer radical polymerization (ATRP)-initiator-containing silica precursors. The obtained oSiO₂ nanoparticles were characterized by a combination of nuclear magnetic resonance (NMR), thermogravimetric analysis (TGA), transmission electron microscopy (TEM), dynamic light scattering (DLS), and small-angle neutron scattering (SANS). The accessibility of the surface-Br initiating sites was evaluated by the polymerization of poly(methyl methacrylate) (PMMA) ligands from the surface of the oSiO₂ nanoparticles using surface-initiated atom transfer radical polymerization (SI-ATRP). The ultrasmall size, tunable composition, and ease of surface modification may render these organo-silica nanoparticle systems with built-in SI-ATRP capability an interesting alternative to conventional silica nanoparticles for functional material design.

Mesoporous Silica Nanoparticles in Bioimaging

A biomedical contrast agent serves to enhance the visualisation of a specific (potentially targeted) physiological region. In recent years, mesoporous silica nanoparticles (MSNs) have developed as a flexible imaging platform of tuneable size/morphology, abundant surface chemistry, biocompatibility and otherwise useful physiochemical properties. This review discusses MSN structural types and synthetic strategies, as well as methods for surface functionalisation. Recent applications in biomedical imaging are then discussed, with a specific emphasis on magnetic resonance and optical modes together with utility in multimodal imaging.

Two-Dimensional Superstructures of Silica Cages

Despite extensive studies on mesoporous silica since the early 1990s, the synthesis of two-dimensional (2D) silica nanostructures remains challenging. Here, mesoporous silica is synthesized at an interface between two immiscible solvents under conditions leading to the formation of 2D superstructures of silica cages, the thinnest mesoporous silica films synthesized to date. Orientational correlations between cage units increase with increasing layer number controlled via pH, while swelling with oil and mixed surfactants increase micelle size dispersity, leading to complex clathrate type structures in multilayer superstructures. The results suggest that a three-dimensional (3D) crystallographic registry within cage-like superstructures emerges as a result of the concerted 3D co-assembly of the organic and inorganic components. Mesoporous 2D superstructures can be fabricated over macroscopic film dimensions and stacked on top of each other. The realization of previously inaccessible mesoporous silica heterostructures with separation or catalytic properties unachievable via conventional bulk syntheses is envisioned.

Preparation of Novel Mesoporous Silica Using a Self-Assembled Graphene Oxide Template

Novel mesoporous silicas rolled with silica sheets with 2D regular spacing were prepared using a self-assembled graphene oxide (GO) template formed by mixing GO with Pluronic123 (P123). Self-assembled GO templated mesoporous silicas (SGT-PMS) showed well-developed X-ray diffraction peaks with d-spacings of 9.8–10.8 nm depending on the amount of GO, indicating mesoporous structures. The specific surface areas increased from 603.8 to 861.2 m²g⁻¹ on adding GO. The pore size distribution was in the range 5.1–5.8 nm and pore volume in the range 0.80–0.99 m³g⁻¹. The SEM images of SGT-PMS showed irregular elliptical particles with various sizes. TEM images showed that the cross section of SGT-PMS particles comprises a roll of silica sheets with 2D regular spacing. The pore walls of SGT-PMS are firmer and thicker than those for PMS without GO as indicated by the corresponding intensities of Q³ and Q⁴ signals. These results were explained well by the self-assembled GO templating mechanism.

Synthesis of Fatty Alcohol Ether Carboxylic Ester Surfactant and its Performance in an Anionic/Non-Ionic Mixed System

A salt-type fatty alcohol ether carboxylic ester (AECE-Na) surfactant with both anionic and non-ionic characteristics was synthesised using a fatty alcohol ether (AEO) and succinic anhydride. Compared with traditional synthetic methods, neither irritating substances (chloroacetic acid and chloroacetate) nor precious metals (Pt and Pd) were used in the synthesis, which is a simple, economic, and green method. FT-IR and 1H NMR spectroscopies and MALDI TOF mass spectrometry were used to prove the molecular structure of the target product AECE-Na. In addition, the surface activities, intermolecular interactions, application properties, and aggregation behaviours of the individual systems (AEO and AECE-Na) and the anionic/non-ionic mixed system (AECE-Na/AEO) were investigated. The results showed that AECE-Na/AEO exhibits synergistic effects in terms of surface tension reduction efficiency, wetting, emulsification, foaming, and detergency compared with the individual systems.

Preparation of Mesoporous Silica by Nonionic Surfactant Micelle-Templated Gelation of Na2SiO3 and H2SiF6 and Application as a Catalyst Carrier for the Partial Oxidation of CH4

Mesoporous silica (MSPN12) was prepared by nonionic surfactant micelle–templated gelation of sodium silicate (Na₂SiO₃) and fluorosilicic acid (H₂SiF₆) in aqueous solution, characterized by a range of instrumental techniques, and tested as a support for Ni and Rh catalysts in the partial oxidation of methane (POM). Calcined and sintered MSPN12 exhibited well-defined d_00l-spacings (3.5–4.39 nm), narrow pore distributions (2.4–3.1 nm), and large specific surface areas (552–1,246 m² g⁻¹), and was found to be highly thermally stable. Microscopic imaging revealed that MSPN12 comprised spherical particles with a uniform diameter of ~0.7 µm, with each particle featuring firm and regular honeycomb-type pores. MSPN12-loaded Ni and Rh maintained stable POM activity at 700 °C during almost 100 h on stream, which were comparable to those for the commercial Rh(5)/Al₂O₃ catalyst in terms of methane conversion and H₂ formation selectivity. Thus, the combination of structural stability and favorable physicochemical properties resulted in good POM performance.

Alkali Earth Catalysts Based on Mesoporous MCM-41 and Al-SBA-15 for Sulfone Removal from Middle Distillates

Mg, Ca, and Ba catalysts supported on structured mesoporous silica oxides types MCM-41 and Al-SBA-15 were synthesized and investigated in sulfone cracking for sulfur removal from oxidized diesel fuel. Functional materials and catalysts were characterized by low-temperature nitrogen adsorption/desorption, transmission electron microscopy, and inductively coupled plasma atomic emission spectroscopy techniques. Catalytic tests were carried out in fixed-bed and batch reactors with a model compound dibenzothiophene sulfone and oxidized diesel fraction as a feed. MgO/MCM-41 and MgO/Al-MCM-41 possess high activity in sulfone cracking. The sulfur content in the diesel fraction decreases from initial 450 up to 100 ppmw. Catalysts can be regenerated for reuse in several cycles and may be potentially scaled up for industrial applications.

Pore-tuning to boost the electrocatalytic activity of polymeric micelle-templated mesoporous Pd nanoparticles

Understanding how mesoporous noble metal architectures affect electrocatalytic performance is very important for the rational design and preparation of high-performance electrocatalysts.

Understanding how mesoporous noble metal architectures affect electrocatalytic performance is very important for the rational design and preparation of high-performance electrocatalysts. Herein, by using polymeric micelle-assembled structures as templates, mesoporous Pd nanoparticles with tunable porous constructions are synthesized by simply tuning the solvent compositions. The effect of porous Pd nanoparticles on the electrocatalytic performance is thoroughly studied. Their superior electrocatalytic activity can be attributed to the mass transport efficiency and open porous structures.

Effect of initial Si/Al ratios on the performance of low crystallinity Hβ-x zeolite supported NiMo carbide catalysts for aromatics hydrogenation

The initial Si/Al ratio of supports influences the active metal composition and dispersion, acidity of NiMoC/Hβ-x catalysts, and performance of aromatic hydrogenation.

Mesoporous carbon nitrides: synthesis, functionalization, and applications

Mesoporous carbon nitrides (MCNs) with large surface areas and uniform pore diameters are unique semiconducting materials and exhibit highly versatile structural and excellent physicochemical properties, which promote their application in diverse fields such as metal free catalysis, photocatalytic water splitting, energy storage and conversion, gas adsorption, separation, and even sensing. These fascinating MCN materials can be obtained through the polymerization of different aromatic and/or aliphatic carbons and high nitrogen containing molecular precursors via hard and/or soft templating approaches. One of the unique characteristics of these materials is that they exhibit both semiconducting and basic properties, which make them excellent platforms for the photoelectrochemical conversion and sensing of molecules such as CO₂, and the selective sensing of toxic organic acids. The semiconducting features of these materials are finely controlled by varying the nitrogen content or local electronic structure of the MCNs. The incorporation of different functionalities including metal nanoparticles or organic molecules is further achieved in various ways to develop new electronic, semiconducting, catalytic, and energy harvesting materials. Dual functionalities including acidic and basic groups are also introduced in the wall structure of MCNs through simple UV-light irradiation, which offers enzyme-like properties in a single MCN system. In this review article, we summarize and highlight the existing literature covering every aspect of MCNs including their templating synthesis, modification and functionalization, and potential applications of these MCN materials with an overview of the key and relevant results. A special emphasis is given on the catalytic applications of MCNs including hydrogenation, oxidation, photocatalysis, and CO₂ activation.

Heterogeneous Catalysis in Zeolites, Mesoporous Silica, and Metal-Organic Frameworks

Crystalline porous materials are important in the development of catalytic systems with high scientific and industrial impact. Zeolites, ordered mesoporous silica, and metal-organic frameworks (MOFs) are three types of porous materials that can be used as heterogeneous catalysts. This review focuses on a comparison of the catalytic activities of zeolites, mesoporous silica, and MOFs. In the first part of the review, the distinctive properties of these porous materials relevant to catalysis are discussed, and the corresponding catalytic reactions are highlighted. In the second part, the catalytic behaviors of zeolites, mesoporous silica, and MOFs in four types of general organic reactions (acid, base, oxidation, and hydrogenation) are compared. The advantages and disadvantages of each porous material for catalytic reactions are summarized. Conclusions and prospects for future development of these porous materials in this field are provided in the last section. This review aims to highlight recent research advancements in zeolites, ordered mesoporous silica, and MOFs for heterogeneous catalysis, and inspire further studies in this rapidly developing field.

Selective acid-functionalized mesoporous silica catalyst for conversion of glycerol to monoglycerides: state of the art and future prospects

The quest for efficient and selective catalysts for conversion of glycerol monoglyceride is critical for the development of reliable methods for its synthesis. Thus, various types of catalyst and methods of catalyst manufacturing for conversion of glycerol to monoglycerides have been investigated. Acid-functionalized mesoporous catalysts are emerging as highly efficient catalysts for conversion of glycerol into monoglyceride. The incorporation of acid components into different mesoporous silicas for this application is reviewed in this work. The superiority of mesostructure catalysts in comparison to microporous catalysts has been elucidated in terms of accessibility to active sites, pore diffusion, thermal stability of the catalyst and catalyst reusability. Recent direction of novel acid-functionalized mesoporous catalysts development for this application is also critically reviewed.

Rational Design and Synthesis of Carboxylate Gemini Surfactants with an Excellent Aggregate Behavior for Nano-La2O3 Morphology-Controllable Preparation

A series of carboxylate gemini surfactants (CGS, C_n-Φ-C_n, n = 12, 14, 16, 18) with diphenyl ketone as a spacer group were prepared using a simple and feasible synthetic method. These CGS exhibited an excellent surface activity with extremely low critical micelle concentration (CMC) value (approximately 10^-5 mol/L), good performance in reducing surface tension (nearly 30 mN/m), and the ability of molecular self-assembly into different aggregate morphologies via adjusting the concentrations, which is attributed to the introduction of diphenyl ketone and carboxylic acid ammonium salt in the molecular structure. Moreover, the surface activity and self-assembly ability of CGS were further optimized by tuning the length of the tail chain. These excellent properties imply that CGS can be a soft template to prepare nanomaterials, especially in morphology-controllable synthesis. By adjusting the concentration of one of CGS (C₁₂-Φ-C₁₂), nano-La₂O₃ particles with diverse morphologies were obtained, including spherical shape, bead-chain shape, rod shape, velvet-antler shape, cedar shape, and bowknot shape. This work offers a vital insight into the rational design of template agents for the development of morphology-controllable nanomaterials.

Defect structures in Frank-Kasper type square-triangle tiling of multimodal cage-type mesoporous silicas

Multimodal cage-type mesoporous silicas (MCMSs) with Frank-Kasper type square-triangle tiling show a unique defect structure, so-called three-fold symmetric hexagons, or shields, which are caused by phason fluctuations in dodecagonal quasicrystals. We observed and characterized three types of configurations inside shields in both quasiperiodic and periodic 3².4.3.4 tiling of MCMSs by transmission electron microscopy (TEM). The high-resolution TEM images of the shields were well explained by polyhedral models, which are the constituents of the Frank-Kasper type tetrahedrally close-packed structures of MCMSs. Shield defects invariably formed because of mismatch in periodic and/or aperiodic square-triangle tiling, and they were also catalyzed by other defects. Multiple shields overlapped with sharing of 30° rhombus units and showed characteristic motifs in the tiling, such as defect-mediated 12-fold wheel and stripe bundle arrangements. Hence, MCMSs with square-triangle tiling would be governed by a random-tiling-like structure stabilized by entropy rather than energy, which results in defect-free tiling.

Fabrication and Functionalization of Inorganic Materials Using Amphiphilic Molecules

In this review, the synthesis of inorganic materials with various properties using amphiphilic molecules is examined. Amphiphilic molecules are used for the formation of highly ordered mesostructures and the surface modification. Two examples of the mesostructures are crystalline mesoporous titania (TiO₂) and the novel visible light responsive mesostuructured titania modified with dye in the pores, which can be fabricated using the molecular self-assemblies of amphiphiles as templates. Surface modification using amphiphilic molecules enables the construction of self-assembled arrays of silica particles and the preparation of a film that can control adsorption/desorption behavior of bovine serum albumin (BSA) by light irradiation.

Synthesis and catalytic performance in the propene epoxidation of a vanadium catalyst supported on mesoporous silica obtained with the aid of sucrose

Sucrose is an effective template for mesoporous silica—an efficient support of vanadium catalysts, active in propene epoxidation to propylene oxide.

Organoindium-modified monodisperse ellipsoid-/platelet-like periodic mesoporous silicas

Indium-modified mondisperse ellipsoid-/platelet-like large-pore periodic mesoporous silica nanoparticles (MMSNs) SBA-15 have been prepared via molecular grafting of In[N(SiMe₃)₂]₃. Surface ligand exchange led to the formation of heteroleptic In species, and the resulting surface In species were converted into crystalline In₂O₃ nanoparticles by calcination.

The formation of an ordered microporous aluminum-based material mediated by phthalic acid

By using phthalic acid as a soft template, we showed that it was possible to prepare a microporous aluminum-based material when the precipitation of Al(3+) was properly controlled. We also identified that this microporous aluminum-based material could be promising for the removal of fluoride ions in water treatment.

Construction of gyroid-structured matrices through the design of geminized amphiphilic zwitterions and their self-organization

Gemini amphiphilic zwitterions exhibit thermotropic bicontinuous cubic liquid-crystalline phases having a 3D continuous ionic domain.