Polymers with Very Low Polydispersities from Atom Transfer Radical Polymerization

Copper Nanodrugs by Atom Transfer Radical Polymerization

In this study, some copper catalysts used for atom transfer radical polymerization (ATRP) were explored as efficient anti-tumor agents. The aqueous solution of copper-containing nanoparticles with uniform spheric morphology was in situ prepared through a copper-catalyzed activator generated by electron transfer (AGET) ATRP in water. Nanoparticles were then directly injected into tumor-bearing mice for antitumor chemotherapy. The copper nanodrugs had prolonged blood circulation time and enhanced accumulation at tumor sites, thus showing potent antitumor activity. This work provides a novel strategy for precise and large-scale preparation of copper nanodrugs with high antitumor activity.

Highly Sensitive Detection of Bacteria by Binder-Coupled Multifunctional Polymeric Dyes

Infectious diseases caused by pathogens are a health burden, but traditional pathogen identification methods are complex and time-consuming. In this work, we have developed well-defined, multifunctional copolymers with rhodamine B dye synthesized by atom transfer radical polymerization (ATRP) using fully oxygen-tolerant photoredox/copper dual catalysis. ATRP enabled the efficient synthesis of copolymers with multiple fluorescent dyes from a biotin-functionalized initiator. Biotinylated dye copolymers were conjugated to antibody (Ab) or cell-wall binding domain (CBD), resulting in a highly fluorescent polymeric dye-binder complex. We showed that the unique combination of multifunctional polymeric dyes and strain-specific Ab or CBD exhibited both enhanced fluorescence and target selectivity for bioimaging of Staphylococcus aureus by flow cytometry and confocal microscopy. The ATRP-derived polymeric dyes have the potential as biosensors for the detection of target DNA, protein, or bacteria, as well as bioimaging.

Strong Anchoring of Hydrogels through Superwetting-Assisted High-Density Interfacial Grafting

Strong adhesion of hydrogels on solids plays an important role in stable working for various practical applications. However, current hydrogel adhesion suffers from poor interfacial bonding with solid surfaces. Here, we propose a general superwetting-assisted interfacial polymerization (SAIP) strategy to robustly anchor hydrogels onto solids by forming high-density interfacial covalent bonds. The key of our strategy is to make the initiator fully contact solid surfaces via a superwetting way for enhancing the interfacial grafting efficiency. The designed anchored hydrogels show strong bulk failure with a high breaking strength of ≈1.37 MPa, different from weak interfacial failure that occurs in traditional strategies. The strong interfacial adhesion greatly enhances the stability of hydrogels against swelling destruction. This work opens up new inspirations for designing strongly anchored hydrogels from an interfacial chemistry perspective.

A Comparative Study of PMETAC-Modified Mesoporous Silica and Titania Thin Films for Molecular Transport Manipulation

The manipulation and understanding of molecular transport across functionalized nanopores will take us closer to mimicking biological membranes and thus to design high-performance permselective separation systems. In this work, Surface-initiated atom transfer radical polymerization (SI-ATRP) of (2-methacryloyloxy)-ethyltrimethylammonium chloride (METAC) was performed on both mesoporous silica and mesoporous titania thin films. Pores were proven to be filled using ellipsometry and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Furthermore, the employed method leads to a polymer overlayer, whose thickness could be discriminated using a double-layer ellipsometry model. Cyclic voltammetry experiments reveal that the transport of electrochemically active probes is affected by the PMETAC presence, both due to the polymer overlayer and the confined charge of the pore-tethered PMETAC. A more detailed study demonstrates that ion permeability depends on the combined role of the inorganic scaffolds' (titania and silica) surface chemistry and the steric and charge exclusion properties of the polyelectrolyte. Interestingly, highly charged negative walls with positively charged polymers may resemble zwitterionic polymer behavior in confined environments.

Atom Transfer Radical Polymerization: A Mechanistic Perspective

Since its inception, atom transfer radical polymerization (ATRP) has seen continuous evolution in terms of the design of the catalyst and reaction conditions; today, it is one of the most useful techniques to prepare well-defined polymers as well as one of the most notable examples of catalysis in polymer chemistry. This Perspective highlights fundamental advances in the design of ATRP reactions and catalysts, focusing on the crucial role that mechanistic studies play in understanding, rationalizing, and predicting polymerization outcomes. A critical summary of traditional ATRP systems is provided first; we then focus on the most recent developments to improve catalyst selectivity, control polymerizations via external stimuli, and employ new photochemical or dual catalytic systems with an outlook to future research directions and open challenges.

Toward Green Atom Transfer Radical Polymerization: Current Status and Future Challenges

Reversible-deactivation radical polymerizations (RDRPs) have revolutionized synthetic polymer chemistry. Nowadays, RDRPs facilitate design and preparation of materials with controlled architecture, composition, and functionality. Atom transfer radical polymerization (ATRP) has evolved beyond traditional polymer field, enabling synthesis of organic-inorganic hybrids, bioconjugates, advanced polymers for electronics, energy, and environmentally relevant polymeric materials for broad applications in various fields. This review focuses on the relation between ATRP technology and the 12 principles of green chemistry, which are paramount guidelines in sustainable research and implementation. The green features of ATRP are presented, discussing the environmental and/or health issues and the challenges that remain to be overcome. Key discoveries and recent developments in green ATRP are highlighted, while providing a perspective for future opportunities in this area.

Ab-Initio Investigations on Hydrogen Dissociation and Cross-Linking of Hydrocarbon Chains of Self-Assembled Monolayers of Alkanes

First-principles calculations were carried out to study the structural and electronic properties of hydrocarbon chains of self-assembled monolayers with hydrogen dissociation. It was found that the incoming hydrogen could lead to the formation of H2 molecules by stripping the nearby hydrogen atoms in the chains and thereby leave the neighboring carbon atoms to be free radicals. Two parallel hydrocarbon chains with dangling bonds can form a direct C-C bond, i.e., cross-linking happens between the two chains, which is ascribed to a charge accumulation in the cross-linking region. The polymerization of short molecules into long hydrocarbon chains through a different cross-linking mode is also discussed.

Fluorogenic monomer activation for protein-initiated atom transfer radical polymerization

Fluorogenic atom transfer radical polymerization (ATRP) directly detects initiator-dependent polymer formation, as initially non-fluorescent polycyclic aromatic probe monomers reveal visible fluorescence upon polymerization in real time. Advancement of this initial proof-of-concept toward biodetection applications requires both a more detailed mechanistic understanding of probe fluorescence activation, and the ability to initiate fluorogenic polymerization directly from a biomolecule surface. Here, we show that simple monomer hydrogenation, independent of polymerization, reveals probe fluorescence, supporting the critical role of covalent enone attachment in fluorogenic probe quenching and subsequent fluorescence activation. We next demonstrate bioorthogonal, protein-initiated fluorogenic ATRP by the surface conjugation and characterization of protein-initiator conjugates of a model protein, bovine serum albumin (BSA). Fluorogenic ATRP from initiator-modified protein allows for real-time visualization of polymer formation with negligible background fluorescence from unmodified BSA controls. We further probe the bioorthogonality of this fluorogenic ATRP assay by assessing polymer formation in a complex biological environment, spiked with fetal bovine serum. Taken together, we demonstrate the potential of aqueous fluorogenic ATRP as a robust, bioorthogonal method for biomolecular-initiated polymerization by real-time fluorescence activation.

Comparable Studies on Nanoscale Antibacterial Polymer Coatings Based on Different Coating Procedures

The antibacterial activity of different antibiotic and metal-free thin polymer coatings was investigated. The films comprised quaternary ammonium compounds (QAC) based on a vinyl benzyl chloride (VBC) building block. Two monomeric QAC of different alkyl chain lengths were prepared, and then polymerized by two different polymerization processes to apply them onto Ti surfaces. At first, the polymeric layer was generated directly on the surface by atom transfer radical polymerization (ATRP). For comparison purposes, in a classical route a copolymerization of the QAC-containing monomers with a metal adhesion mediating phosphonate (VBPOH) monomers was carried out and the Ti surfaces were coated via drop coating. The different coatings were characterized by X-ray photoelectron spectroscopy (XPS) illustrating a thickness in the nanomolecular range. The cytocompatibility in vitro was confirmed by both live/dead and WST-1 assay. The antimicrobial activity was evaluated by two different assays (CFU and BTG, resp.,), showing for both coating processes similar results to kill bacteria on contact. These antibacterial coatings present a simple method to protect metallic devices against microbial contamination.

Precision synthesis for well-defined linear and/or architecturally controlled thermoresponsive poly(N-substituted acrylamide)s

We describe the progress in precision polymerizations of specific kinds of N-alkylacrylamides and N,N-dialkylacrylamides to produce polymers showing thermoresponsive properties in aqueous media, which representatively include the reversible-deactivation radical polymerizations...

Unconventional Approach to Fabricating a TiO2 Nanoring with Precise Dimension Control Based on Starlike Polymeric Nanoreactors

The past few years witnessed the rapid development of bottom-up synthesis strategies for preparing various nanostructures (i.e., nanoparticles, nanorods, nanowires, etc.) with distinct morphology-dependent properties. In this study, we reported a facile and efficient synthesis method for preparing anatase titanium dioxide (TiO₂) nanorings based on multiarm, starlike amphiphilic polystyrene-b-poly(acrylic acid) (PS-b-PAA) diblock copolymers as nanoreactors which were prepared via a sequential atom-transfer radical polymerization (ATRP) technique followed by the conversion of polystyrene-b-poly(tert-butyl acrylate) (PS-b-PtBA) to PS-b-PAA. The outer PAA block of nanoreactors possessed carboxylic acid groups which could coordinate with a titanium precursor followed by high-temperature calcination to form crystalline TiO₂ nanorings. The living nature of ATRP enabled the precise preparation of starlike diblock copolymer nanoreactors with a controlled length of each block (i.e., PtBA and PS), thereby tailoring the inner diameter and wall thickness of the resulting TiO₂ nanorings, which were inaccessible to conventional routes.

Tuning dispersity of linear polymers and polymeric brushes grown from nanoparticles by atom transfer radical polymerization

Molecular weight distribution imposes considerable influence on the properties of polymers, making it an important parameter, impacting morphology and structural behavior of polymeric materials.

RAFT agent symmetry and the effects on photo-growth behavior in living polymer networks

Here we describe how different symmetries of RAFT agent act after growth. Asymmetric networks showed a pore-filling behaviour, while symmetric networks underwent mesh-expansion.

Liquid metal nanocomposites

Liquid metal (LM) has attracted tremendous interest over the past decade for its enabling combination of high electrical and thermal conductivity and low mechanical compliance and viscosity. Efforts to harness LM in electronics, robotics, and biomedical applications have largely involved methods to encapsulate the liquid so that it can support functionality without leaking or smearing. In recent years, there has been increasing interest in LM "nanocomposites" in which either liquid metal is mixed with metallic nanoparticles or nanoscale droplets of liquid metal are suspended within a soft polymer matrix. Both of these material systems represent an important step towards utilizing liquid metal for breakthrough applications. In this minireview, we present a brief overview of recent progress over the past few years in methods to synthesize LM nanomaterials and utilize them as transducers for sensing, actuation, and energy harvesting. In particular, we focus on techniques for stable synthesis of LM nanodroplets, suspension of nanodroplets within various matrix materials, and methods for incorporating metallic nanoparticles within an LM matrix.

Electrochemical immunosensors for the detection of cytokine tumor necrosis factor alpha: A review

In this review, we focus on recent developments in nonlabeled@label-free and labeled@sandwich assay concepts of tumor necrosis factor-alpha (TNF-α) using numerous electrochemical approaches. The fundamental role of such nanostructured materials for the improvement of the analytical response and thus the analytical figures of merit of various TNF-α sensing operations were revealed. Also, this examination focused on recent developments in immuno-electrochemical cytokine TNF-α sensors based on nanostructured materials from 2006 to 2019.

An isocyanide ligand for the rapid quenching and efficient removal of copper residues after Cu/TEMPO-catalyzed aerobic alcohol oxidation and atom transfer radical polymerization

Three for the price of one: 1,4-bis(3-isocyanopropyl)piperazine allows for the removal of Cu impurities, can quench Cu-catalyzed reactions, and can prevent undesirable Glaser coupling.

Polymer-Assisted Metal Deposition (PAMD) for Flexible and Wearable Electronics: Principle, Materials, Printing, and Devices

The rapid development of flexible and wearable electronics favors low-cost, solution-processing, and high-throughput techniques for fabricating metal contacts, interconnects, and electrodes on flexible substrates of different natures. Conventional top-down printing strategies with metal-nanoparticle-formulated inks based on the thermal sintering mechanism often suffer from overheating, rough film surface, low adhesion, and poor metal quality, which are not desirable for most flexible electronic applications. In recent years, a bottom-up strategy termed as polymer-assisted metal deposition (PAMD) shows great promise in addressing the abovementioned challenges. Here, a detailed review of the development of PAMD in the past decade is provided, covering the fundamental chemical mechanism, the preparation of various soft and conductive metallic materials, the compatibility to different printing technologies, and the applications for a wide variety of flexible and wearable electronic devices. Finally, the attributes of PAMD in comparison with conventional nanoparticle strategies are summarized and future technological and application potentials are elaborated.

Transition Metal Mediated Living Radical Polymerisation

Living radical polymerisation has witnessed an unprecedented interest from polymer and materials scientists. Traditionally, polymers tended to replace natural materials such as wood, cotton and glass, and were used primarily for their structural features and performance and cost advantages. New functional polymers are essential for the manufacture of cell phones, lap-top computers, new cosmetics, and many pharmaceuticals. It is important to be able to control how monomers are put together within the macromolecule for the design at the molecular level for specific applications. Living polymerisation allows for end group control, polymer chain length and relatively narrow polydispersity polymers. In nature, the ability to control monomer distribution and chain length is obvious with approximately 20 amino acids being the monomers for polymers as diverse as hair, insulin and haemoglobin. Living radical polymerisation solves many of the problems in the use of monomers that contain heteroatoms and functional groups. These tend to be reactive towards strong nucleophiles and electrophiles which are required in ionic polymerisation. Protecting group chemistry as used in small molecule organic synthesis is not practical in polymer synthesis. Thus radicals that are inert to most functional groups and in particular protic species seem to be the answer. The mechanism of the transition metal mediate systems is extremely complicated with a range of organometallic species present in the reaction mixture. Solvents and coordinating monomers drastically affect the ideal reaction conditions and it is impossible to predict the optimum conditions for each synthesis without certain experiments being carried out. Nevertheless, catalyst systems are available which are acceptable and work well enough to be able to make a plethora of different macromolecules for a diverse range of applications /properties.

Fluorogenic atom transfer radical polymerization in aqueous media as a strategy for detection

The development of novel approaches to signal amplification in aqueous media could enable new diagnostic platforms for the detection of water-soluble analytes, including biomolecules. This paper describes a fluorogenic polymerization approach to amplify initiator signal by the detection of visible fluorescence upon polymerization in real-time. Fluorogenic monomers were synthesized and co-polymerized by atom transfer radical polymerization (ATRP) in water to reveal increasing polymer fluorescence as a function of both reaction time and initiator concentration. Optimization of the fluorogenic ATRP reaction conditions allowed for the quantitative detection of a small-molecule initiator as a model analyte over a broad linear concentration range (pM to mM). Raising the reaction temperature from 30 °C to 60 °C facilitated sensitive initiator detection at sub-picomolar concentrations in as little as 1 h of polymerization. This method was then applied to the detection of streptavidin as a model biological analyte by fluorogenic polymerization from a designed biotinylated ATRP initiator. Taken together, these studies represent the first example of a fluorogenic ATRP reaction and establish fluorogenic polymerization as a promising approach for the direct detection of aqueous analytes and biomolecular recognition events.

Functional materials generated by allying cyclodextrin-based supramolecular chemistry with living polymerization

Cyclodextrin molecules are cyclic oligosaccharides that display a unique structure including an inner side and two faces on their outer sides.

Organocatalyzed Controlled Radical Polymerizations

Radical polymerizations are responsible for a significant amount of the World's total polymer production. Free-radical polymerization provides a relatively inexpensive and facile route to produce bulk plastic products, however, it fails in the synthesis of precisely defined macromolecules. To address this issue, controlled radical polymerizations have been developed, which utilize a reversible deactivation mechanism for the synthesis of advanced polymeric architectures. In this chapter, we discuss the mechanisms and applications of organocatalyzed controlled radical polymerizations, specifically atom transfer radical polymerization, photo mediated reversible addition fragmentation chain-transfer polymerization, and reversible complexation mediated radical polymerization, as powerful new methods for precision polymer synthesis.

Advanced Materials by Atom Transfer Radical Polymerization

Atom transfer radical polymerization (ATRP) has been successfully employed for the preparation of various advanced materials with controlled architecture. New catalysts with strongly enhanced activity permit more environmentally benign ATRP procedures using ppm levels of catalyst. Precise control over polymer composition, topology, and incorporation of site specific functionality enables synthesis of well-defined gradient, block, comb copolymers, polymers with (hyper)branched structures including stars, densely grafted molecular brushes or networks, as well as inorganic-organic hybrid materials and bioconjugates. Examples of specific applications of functional materials include thermoplastic elastomers, nanostructured carbons, surfactants, dispersants, functionalized surfaces, and biorelated materials.

Synthesis of Star Polymers using Organocatalyzed Atom Transfer Radical Polymerization Through a Core-first Approach

Synthetic routes to higher ordered polymeric architectures are important tools for advanced materials design and realization. In this study, organocatalyzed atom transfer radical polymerization is employed for the synthesis of star polymers through a core-first approach using a visible-light absorbing photocatalyst, 3,7-di(4-biphenyl)-1-naphthalene-10-phenoxazine. Structurally similar multifunctional initiators possessing 2, 3, 4, 6, or 8 initiating sites were used in this study for the synthesis of linear telechelic polymers and star polymers typically possessing dispersities lower than 1.5 while achieving high initiator efficiencies. Furthermore, no evidence of undesirable star-star coupling reactions was observed, even at high monomer conversions and high degrees of polymerization. The utility of this system is further exemplified through the synthesis of well-defined diblock star polymers.

Copper(0) Mediated Single Electron Transfer Controlled Radical Polymerization toward CF Bonds on Poly(vinylidene fluoride)

The first copper(0) mediated controlled radical polymerization (CRP) of methyl methacrylate (MMA) toward CF bonds onto poly(vinylidene fluoride) (PVDF) is reported with rather high activity. By avoiding the halogen exchange, Cu⁰ instead of Cu^I complexes utilized as catalyst is responsible for the significantly improved polymerization activity. Using FH decoupled nuclear magnetic resonance technique, the grafting sites onto PVDF are finely located. From this, detailed topologic information including the grafting density, average length of each side chain, along with the overall grafted content of PMMA, is detected by tracking the polymerization as a function of time. This work offers not only a facile CRP strategy based on inactive CF bonds but also a deep insight into the cleavage of F-bearing compounds in organic chemistry.

Solvent Effects on the Intramolecular Charge Transfer Character of N,N-Diaryl Dihydrophenazine Catalysts for Organocatalyzed Atom Transfer Radical Polymerization

The nature of intramolecular charge transfer of N,N-diaryl dihydrophenazine photocatalysts (PCs) in different solvents is explored in context of their performance in organocatalyzed atom transfer radical polymerization (O-ATRP). PCs having a computationally predicted lowest energy excited state exhibiting charge transfer (CT) character can operate a highly controlled O-ATRP in a wide range of solvent polarities, from non-polar hexanes to highly polar N,N-dimethylacetamide. For PCs having a computationally predicted lowest energy excited state not possessing CT character, their ability to operate a controlled O-ATRP is decreased. This study confirms the importance of CT character in the excited state for N,N-diaryl dihydrophenazine PCs, and a deeper understanding of the activity of CT PCs has enabled the synthesis of polymers of low dispersity ( < 1.10) in a controlled fashion.

In-column bonded phase polymerization for improved packing uniformity

It is difficult to pack chromatographic particles having polymeric-bonded phases because solvents used for making a stable slurry cause the polymer layer to swell. Growth of the polymer inside the column (in situ) after packing was investigated and compared with conventional, ex situ polymer growth. The method of activators generated by electron transfer, along with atom-transfer radical polymerization, enabled polymerization under ambient conditions. Nonporous, 0.62 μm silica particles with silane initiators were used. Polyacrylamide films with a hydrated thickness of 23 nm in 75:25 water/isopropanol grew in 55 min for both in situ and ex situ preparations, and the same carbon coverage was observed. Higher chromatographic resolution and better column-to-column reproducibility were observed for in situ polymer growth, as evaluated by hydrophilic interaction liquid chromatography for the model glycoprotein, ribonuclease B. In situ polymer growth was also found to give lower eddy diffusion, as shown by a narrower peak width for injected acetonitrile in 50:50 acetonitrile/water. When columns were packed more loosely, bed collapse occurred quickly for ex situ, but not for in situ, polymer growth. The higher resolution and stability for in situ polymer growth is explained by packing with hard, rather than soft, contacts between particles.