Normal-mode and free-Air gravity constraints on lateral variations in velocity and density of Earth's mantle

Iron silicate perovskite and postperovskite in the deep lower mantle

Ferromagnesian silicates are the dominant constituents of the Earth's mantle, which comprise more than 80% of our planet by volume. To interpret the low shear-velocity anomalies in the lower mantle, we need to construct a reliable transformation diagram of ferromagnesian silicates over a wide pressure-temperature (P-T) range. While MgSiO3 in the perovskite structure has been extensively studied due to its dominance on Earth, phase transformations of iron silicates under the lower mantle conditions remain unresolved. In this study, we have obtained an iron silicate phase in the perovskite (Pv) structure using synthetic fayalite (Fe2SiO4) as the starting material under P-T conditions of the lower mantle. Chemical analyses revealed an unexpectedly high Fe/Si ratio of 1.72(3) for the Pv phase in coexistence with metallic iron particles, indicating incorporation of about 25 mol% Fe2O3 in the Pv phase with an approximate chemical formula (Fe2+0.75Fe3+0.25)(Fe3+0.25Si0.75)O3. We further obtained an iron silicate phase in the postperovskite (PPv) structure above 95 GPa. The calculated curves of compressional (VP) and shear velocity (VS) of iron silicate Pv and PPv as a function of pressure are nearly parallel to those of MgSiO3, respectively. To the best of our knowledge, the iron silicate Pv and PPv are the densest phases among all the reported silicates stable at P-T conditions of the lower mantle. The high ferric iron content in the silicate phase and the spin-crossover of ferric iron at the Si-site above ~55 GPa should be taken into account in order to interpret the seismic observations. Our results would provide crucial information for constraining the geophysical and geochemical models of the lower mantle.

Structure and elasticity of CaC2O5 suggests carbonate contribution to the seismic anomalies of Earth's mantle

Knowledge of carbonate compounds under high pressure inside Earth is key to understanding the internal structure of the Earth, the deep carbon cycle and major geological events. Here we use first-principles simulations to calculate the structure and elasticity of CaC2O5-minerals with different symmetries under high pressure. Our calculations show that CaC2O5-minerals represent a group of low-density low-seismic-wave velocity mantle minerals. Changes in seismic wave velocity caused by the phase transformation of CaC2O5-Cc to CaC2O5-I[Formula: see text]2d (CaC2O5-C2-l) agree with wave velocity discontinuity at a depth of 660 km in the mantle transition zone. Moreover, when CaC2O5-Fdd2 transforms into CaC2O5-C2 under 70 GPa, its shear wave velocity decreases by 7.4%, and its density increases by 5.8%, which is consistent with the characteristics of large low-shear-velocity provinces (LLSVPs). Furthermore, the shear wave velocity of CaC2O5-I[Formula: see text]2d is very similar to that of cubic Ca-perovskite, which is one of the main constituents of the previously detected LLSVPs. Therefore, we propose that CaC2O5 and its high-pressure polymorphs may be a main component of LLSVPs.

Vestiges of impact-driven three-phase mixing in the chemistry and structure of Earth's mantle

Highly siderophile elements (HSEs; namely Ru, Rh, Pd, Re, Os, Ir, Pt, and Au) in Earth's mantle require the addition of metals after the formation of Earth's core. Early, large collisions have the potential to deliver metals, but the details of their mixing with Earth's mantle remain unresolved. As a large projectile disrupts and penetrates Earth's mantle, a fraction of its metallic core may directly merge with Earth's core. Ensuing gravitational instabilities remove the remaining projectile's core stranded in Earth's mantle, leaving the latter deprived of HSEs. Here, we propose a framework that can efficiently retain the metallic components during large impacts. The mechanism is based on the ubiquitous presence of a partially molten region in the mantle beneath an impact-generated magma ocean, and it involves rapid three-phase flow with solid silicate, molten silicate, and liquid metal as well as long-term mixing by mantle convection. In addition, large low-shear-velocity provinces in the lower mantle may originate from compositional heterogeneities resulting from the proposed three-phase flow during high-energy collisions.

Compositional and thermal state of the lower mantle from joint 3D inversion with seismic tomography and mineral elasticity

The compositional and thermal state of Earth's mantle provides critical constraints on the origin, evolution, and dynamics of Earth. However, the chemical composition and thermal structure of the lower mantle are still poorly understood. Particularly, the nature and origin of the two large low-shear-velocity provinces (LLSVPs) in the lowermost mantle observed from seismological studies are still debated. In this study, we inverted for the 3D chemical composition and thermal state of the lower mantle based on seismic tomography and mineral elasticity data by employing a Markov chain Monte Carlo framework. The results show a silica-enriched lower mantle with a Mg/Si ratio less than ~1.16, lower than that of the pyrolitic upper mantle (Mg/Si = 1.3). The lateral temperature distributions can be described by a Gaussian distribution with a standard deviation (SD) of 120 to 140 K at 800 to 1,600 km and the SD increases to 250 K at 2,200 km depth. However, the lateral distribution in the lowermost mantle does not follow the Gaussian distribution. We found that the velocity heterogeneities in the upper lower mantle mainly result from thermal anomalies, while those in the lowermost mantle mainly result from compositional or phase variations. The LLSVPs have higher density at the base and lower density above the depth of ~2,700 km than the ambient mantle, respectively. The LLSVPs are found to have ~500 K higher temperature, higher Bridgmanite and iron content than the ambient mantle, supporting the hypothesis that the LLSVPs may originate from an ancient basal magma ocean formed in Earth's early history.

Mapping global kimberlite potential from reconstructions of mantle flow over the past billion years

Kimberlites are the primary source of economic grade diamonds. Their geologically rapid eruptions preferentially occur near or through thick and ancient continental lithosphere. Studies combining tomographic models with tectonic reconstructions and kimberlite emplacement ages and locations have revealed spatial correlations between large low shear velocity provinces in the lowermost mantle and reconstructed global kimberlite eruption locations over the last 320 Myr. These spatial correlations assume that the lowermost mantle structure has not changed over time, which is at odds with mantle flow models that show basal thermochemical structures to be mobile features shaped by cold sinking oceanic lithosphere. Here we investigate the match to the global kimberlite record of stationary seismically slow basal mantle structures (as imaged through tomographic modelling) and mobile hot basal structures (as predicted by reconstructions of mantle flow over the past billion years). We refer to these structures as “basal mantle structures” and consider their intersection with reconstructed thick or ancient lithosphere to represent areas with a high potential for past eruptions of kimberlites, and therefore areas of potential interest for diamond exploration. We use the distance between reconstructed kimberlite eruption locations and kimberlite potential maps as an indicator of model success, and we find that mobile lowermost mantle structures are as close to reconstructed kimberlites as stationary ones. Additionally, we find that mobile lowermost mantle structures better fit major kimberlitic events, such as the South African kimberlite bloom around 100 Ma. Mobile basal structures are therefore consistent with both solid Earth dynamics and with the kimberlite record.

On the relative temperatures of Earth's volcanic hotspots and mid-ocean ridges

Volcanic hotspots are thought to be fed by hot, active upwellings from the deep mantle, with excess temperatures (T_ex) ~100° to 300°C higher than those of mid-ocean ridges. However, T_ex estimates are limited in geographical coverage and often inconsistent for individual hotspots. We infer the temperature of oceanic hotspots and ridges simultaneously by converting seismic velocity to temperature. We show that while ~45% of plume-fed hotspots are hot (T_ex ≥ 155°C), ~15% are cold (T_ex ≤ 36°C) and ~40% are not hot enough to actively upwell (50°C ≤ T_ex ≤ 136°C). Hot hotspots have an extremely high helium-3/helium-4 ratio and buoyancy flux, but cold hotspots do not. The latter may originate at upper mantle depths. Alternatively, the deep plumes that feed them may be entrained and cooled by small-scale convection.

The evolution of basal mantle structure in response to supercontinent aggregation and dispersal

Seismic studies have revealed two Large Low-Shear Velocity Provinces (LLSVPs) in the lowermost mantle. Whether these structures remain stable over time or evolve through supercontinent cycles is debated. Here we analyze a recently published mantle flow model constrained by a synthetic plate motion model extending back to one billion years ago, to investigate how the mantle evolves in response to changing plate configurations. Our model predicts that sinking slabs segment the basal thermochemical structure below an assembling supercontinent, and that this structure eventually becomes unified due to slab push from circum-supercontinental subduction. In contrast, the basal thermochemical structure below the superocean is generally coherent due to the persistence of a superocean in our imposed plate reconstruction. The two antipodal basal thermochemical structures exchange material several times when part of one of the structures is carved out and merged with the other one, similarly to “exotic” tectonic terranes. Plumes mostly rise from thick basal thermochemical structures and in some instances migrate from the edges towards the interior of basal thermochemical structures due to slab push. Our results suggest that the topography of basal structures and distribution of plumes change over time due to the changing subduction network over supercontinent cycles.

Seismological expression of the iron spin crossover in ferropericlase in the Earth's lower mantle

The two most abundant minerals in the Earth’s lower mantle are bridgmanite and ferropericlase. The bulk modulus of ferropericlase (Fp) softens as iron d-electrons transition from a high-spin to low-spin state, affecting the seismic compressional velocity but not the shear velocity. Here, we identify a seismological expression of the iron spin crossover in fast regions associated with cold Fp-rich subducted oceanic lithosphere: the relative abundance of fast velocities in P- and S-wave tomography models diverges in the ~1,400-2,000 km depth range. This is consistent with a reduced temperature sensitivity of P-waves throughout the iron spin crossover. A similar signal is also found in seismically slow regions below ~1,800 km, consistent with broadening and deepening of the crossover at higher temperatures. The corresponding inflection in P-wave velocity is not yet observed in 1-D seismic profiles, suggesting that the lower mantle is composed of non-uniformly distributed thermochemical heterogeneities which dampen the global signature of the Fp spin crossover.

This study identifies the predicted seismic expression of the high-to-low iron spin crossover in the deep Earth mineral ferropericlase. A depth-dependent signal is detected in the fastest and slowest regions, related to lateral temperature variations, of several global seismic tomography models.

Giant impacts stochastically change the internal pressures of terrestrial planets

Pressure is a key parameter in the physics and chemistry of planet formation and evolution. Previous studies have erroneously assumed that internal pressures monotonically increase with the mass of a body. Using smoothed particle hydrodynamics and potential field method calculations, we demonstrate that the hot, rapidly rotating bodies produced by giant impacts can have much lower internal pressures than cool, slowly rotating planets of the same mass. Pressures subsequently increase because of thermal and rotational evolution of the body. Using the Moon-forming impact as an example, we show that the internal pressures after the collision could have been less than half that in present-day Earth. The current pressure profile was not established until Earth cooled and the Moon receded, a process that may take up to tens of millions of years. Our work defines a new paradigm for pressure evolution during accretion of terrestrial planets: stochastic changes driven by impacts.

Valence and spin states of iron are invisible in Earth's lower mantle

Heterogeneity in Earth's mantle is a record of chemical and dynamic processes over Earth's history. The geophysical signatures of heterogeneity can only be interpreted with quantitative constraints on effects of major elements such as iron on physical properties including density, compressibility, and electrical conductivity. However, deconvolution of the effects of multiple valence and spin states of iron in bridgmanite (Bdg), the most abundant mineral in the lower mantle, has been challenging. Here we show through a study of a ferric-iron-only (Mg_0.46Fe³⁺_0.53)(Si_0.49Fe³⁺_0.51)O₃ Bdg that Fe³⁺ in the octahedral site undergoes a spin transition between 43 and 53 GPa at 300 K. The resolved effects of the spin transition on density, bulk sound velocity, and electrical conductivity are smaller than previous estimations, consistent with the smooth depth profiles from geophysical observations. For likely mantle compositions, the valence state of iron has minor effects on density and sound velocities relative to major cation composition.

Tidal tomography constrains Earth's deep-mantle buoyancy

Earth's body tide-also known as the solid Earth tide, the displacement of the solid Earth's surface caused by gravitational forces from the Moon and the Sun-is sensitive to the density of the two Large Low Shear Velocity Provinces (LLSVPs) beneath Africa and the Pacific. These massive regions extend approximately 1,000 kilometres upward from the base of the mantle and their buoyancy remains actively debated within the geophysical community. Here we use tidal tomography to constrain Earth's deep-mantle buoyancy derived from Global Positioning System (GPS)-based measurements of semi-diurnal body tide deformation. Using a probabilistic approach, we show that across the bottom two-thirds of the two LLSVPs the mean density is about 0.5 per cent higher than the average mantle density across this depth range (that is, its mean buoyancy is minus 0.5 per cent), although this anomaly may be concentrated towards the very base of the mantle. We conclude that the buoyancy of these structures is dominated by the enrichment of high-density chemical components, probably related to subducted oceanic plates or primordial material associated with Earth's formation. Because the dynamics of the mantle is driven by density variations, our result has important dynamical implications for the stability of the LLSVPs and the long-term evolution of the Earth system.

Density structure of Earth's lowermost mantle from Stoneley mode splitting observations

Advances in our understanding of Earth's thermal evolution and the style of mantle convection rely on robust seismological constraints on lateral variations of density. The large-low-shear-wave velocity provinces (LLSVPs) atop the core-mantle boundary beneath Africa and the Pacific are the largest structures in the lower mantle, and hence severely affect the convective flow. Here, we show that anomalous splitting of Stoneley modes, a unique class of free oscillations that are perturbed primarily by velocity and density variations at the core-mantle boundary, is explained best when the overall density of the LLSVPs is lower than the surrounding mantle. The resolved density variations can be explained by the presence of post-perovskite, chemical heterogeneity or a combination of the two. Although we cannot rule out the presence of a ∼100-km-thick denser-than-average basal structure, our results support the hypothesis that LLSVPs signify large-scale mantle upwelling in two antipodal regions of the mantle.

Deep mantle structure as a reference frame for movements in and on the Earth

Earth's residual geoid is dominated by a degree-2 mode, with elevated regions above large low shear-wave velocity provinces on the core-mantle boundary beneath Africa and the Pacific. The edges of these deep mantle bodies, when projected radially to the Earth's surface, correlate with the reconstructed positions of large igneous provinces and kimberlites since Pangea formed about 320 million years ago. Using this surface-to-core-mantle boundary correlation to locate continents in longitude and a novel iterative approach for defining a paleomagnetic reference frame corrected for true polar wander, we have developed a model for absolute plate motion back to earliest Paleozoic time (540 Ma). For the Paleozoic, we have identified six phases of slow, oscillatory true polar wander during which the Earth's axis of minimum moment of inertia was similar to that of Mesozoic times. The rates of Paleozoic true polar wander (<1°/My) are compatible with those in the Mesozoic, but absolute plate velocities are, on average, twice as high. Our reconstructions generate geologically plausible scenarios, with large igneous provinces and kimberlites sourced from the margins of the large low shear-wave velocity provinces, as in Mesozoic and Cenozoic times. This absolute kinematic model suggests that a degree-2 convection mode within the Earth's mantle may have operated throughout the entire Phanerozoic.

Stability of active mantle upwelling revealed by net characteristics of plate tectonics

Viscous convection within the mantle is linked to tectonic plate motions and deforms Earth's surface across wide areas. Such close links between surface geology and deep mantle dynamics presumably operated throughout Earth's history, but are difficult to investigate for past times because the history of mantle flow is poorly known. Here we show that the time dependence of global-scale mantle flow can be deduced from the net behaviour of surface plate motions. In particular, we tracked the geographic locations of net convergence and divergence for harmonic degrees 1 and 2 by computing the dipole and quadrupole moments of plate motions from tectonic reconstructions extended back to the early Mesozoic era. For present-day plate motions, we find dipole convergence in eastern Asia and quadrupole divergence in both central Africa and the central Pacific. These orientations are nearly identical to the dipole and quadrupole orientations of underlying mantle flow, which indicates that these 'net characteristics' of plate motions reveal deeper flow patterns. The positions of quadrupole divergence have not moved significantly during the past 250 million years, which suggests long-term stability of mantle upwelling beneath Africa and the Pacific Ocean. These upwelling locations are positioned above two compositionally and seismologically distinct regions of the lowermost mantle, which may organize global mantle flow as they remain stationary over geologic time.

Indoor seismology by probing the Earth's interior by using sound velocity measurements at high pressures and temperatures

The adiabatic bulk (K(S)) and shear (G) moduli of mantle materials at high pressure and temperature can be obtained directly by measuring compressional and shear wave velocities in the laboratory with experimental techniques based on physical acoustics. We present the application of the current state-of-the-art experimental techniques by using ultrasonic interferometry in conjunction with synchrotron x radiation to study the elasticity of olivine and pyroxenes and their high-pressure phases. By using these updated thermoelasticity data for these phases, velocity and density profiles for a pyrolite model are constructed and compared with radial seismic models. We conclude that pyrolite provides an adequate explanation of the major seismic discontinuities at 410- and 660-km depths, the gradient in the transition zone, as well as the velocities in the lower mantle, if the uncertainties in the modeling and the variations in different seismic models are considered. The characteristics of the seismic scaling factors in response to thermal anomalies suggest that anticorrelations between bulk sound and shear wave velocities, as well as the large positive density anomalies observed in the lower mantle, cannot be explained fully without invoking chemical variations.

Insights into the nature of the transition zone from physically constrained inversion of long-period seismic data

Imposing a thermal and compositional significance to the outcome of the inversion of seismic data facilitates their interpretation. Using long-period seismic waveforms and an inversion approach that includes constraints from mineral physics, we find that lateral variations of temperature can explain a large part of the data in the upper mantle. The additional compositional signature of cratons emerges in the global model as well. Above 300 km, we obtain seismic geotherms that span the range of expected temperatures in various tectonic regions. Absolute velocities and gradients with depth are well constrained by the seismic data throughout the upper mantle, except near discontinuities. The seismic data are consistent with a slower transition zone and an overall faster shallow upper mantle, which is not compatible with a homogenous dry pyrolite composition. A gradual enrichment with depth in a garnet-rich component helps to reduce the observed discrepancies. A hydrated transition zone would help to lower the velocities in the transition zone, but it does not explain the seismic structure above it.

A Post-Perovskite Lens and D'' Heat Flux Beneath the Central Pacific

Temperature gradients in a low-shear-velocity province in the lowermost mantle (D'' region) beneath the central Pacific Ocean were inferred from the observation of a rapid S-wave velocity increase overlying a rapid decrease. These paired seismic discontinuities are attributed to a phase change from perovskite to post-perovskite and then back to perovskite as the temperature increases with depth. Iron enrichment could explain the occurrence of post-perovskite several hundred kilometers above the core-mantle boundary in this warm, chemically distinct province. The double phase-boundary crossing directly constrains the lowermost mantle temperature gradients. Assuming a standard but unconstrained choice of thermal conductivity, the regional core-mantle boundary heat flux (approximately 85 +/- 25 milliwatts per square meter), comparable to the average at Earth's surface, was estimated, along with a lower bound on global core-mantle boundary heat flow in the range of 13 +/- 4 terawatts. Mapped velocity-contrast variations indicate that the lens of post-perovskite minerals thins and vanishes over 1000 kilometers laterally toward the margin of the chemical distinct region as a result of a approximately 500-kelvin temperature increase.

Iron-Rich Post-Perovskite and the Origin of Ultralow-Velocity Zones

The boundary layer between the crystalline silicate lower mantle and the liquid iron core contains regions with ultralow seismic velocities. Such low compressional and shear wave velocities and high Poisson's ratio are also observed experimentally in post-perovskite silicate phase containing up to 40 mol% FeSiO3 endmember. The iron-rich post-perovskite silicate is stable at the pressure-temperature and chemical environment of the core-mantle boundary and can be formed by core-mantle reaction. Mantle dynamics may lead to further accumulation of this material into the ultralow-velocity patches that are observable by seismology.

MgSiO3 postperovskite at D'' conditions

The postperovskite transition in MgSiO(3) at conditions similar to those expected at the D'' discontinuity of Earth's lower mantle offers a paradigm for interpreting the properties of this region. Despite consistent experimental and theoretical predictions of this phase transformation, the complexity of the D'' region raises questions about its geophysical significance. Here we report the thermoelastic properties of Cmcm postperovskite at appropriate conditions and evidences of its presence in the lowermost mantle. These are (i) the jumps in shear and longitudinal velocities similar to those observed in certain places of the D'' discontinuity and (ii) the anticorrelation between shear and bulk velocity anomalies as detected within the D'' region. In addition, the increase in shear modulus across the phase transition provides a possible explanation for the reported discrepancy between the calculated shear modulus of postperovskite free aggregates and the seismological counterpart in the lowermost mantle.

The physical and chemical composition of the lower mantle

This article reviews some of the recent advances made within the field of mineral physics. In order to link the observed seismic and density structures of the lower mantle with a particular mineral composition, knowledge of the thermodynamic properties of the candidate materials is required. Determining which compositional model best matches the observed data is difficult because of the wide variety of possible mineral structures and compositions. State-of-the-art experimental and analytical techniques have pushed forward our knowledge of mineral physics, yet certain properties, such as the elastic properties of lower mantle minerals at high pressures and temperatures, are difficult to determine experimentally and remain elusive. Fortunately, computational techniques are now sufficiently advanced to enable the prediction of these properties in a self-consistent manner, but more results are required.A fundamental question is whether or not the upper and lower mantles are mixing. Traditional models that involve chemically separate upper and lower mantles cannot yet be ruled out despite recent conflicting seismological evidence showing that subducting slabs penetrate deep into the lower mantle and that chemically distinct layers are, therefore, unlikely.Recent seismic tomography studies giving three-dimensional models of the seismic wave velocities in the Earth also base their interpretations on the thermodynamic properties of minerals. These studies reveal heterogeneous velocity and density anomalies in the lower mantle, which are difficult to reconcile with mineral physics data.

Deep mantle structure and the postperovskite phase transition

Seismologists have known for many years that the lowermost mantle of the Earth is complex. Models based on observed seismic phases sampling this region include relatively sharp horizontal discontinuities with strong zones of anisotropy, nearly vertical contrasts in structure, and small pockets of ultralow velocity zones (ULVZs). This diversity of structures is beginning to be understood in terms of geodynamics and mineral physics, with dense partial melts causing the ULVZs and a postperovskite solid-solid phase transition producing regional layering, with the possibility of large-scale variations in chemistry. This strong heterogeneity has significant implications on heat transport out of core, the evolution of the magnetic field, and magnetic field polarity reversals.

Earth's Free Oscillations Excited by the 26 December 2004 Sumatra-Andaman Earthquake

At periods greater than 1000 seconds, Earth's seismic free oscillations have anomalously large amplitude when referenced to the Harvard Centroid Moment Tensor fault mechanism, which is estimated from 300- to 500-second surface waves. By using more realistic rupture models on a steeper fault derived from seismic body and surface waves, we approximated free oscillation amplitudes with a seismic moment (6.5 x 10(22) Newton.meters) that corresponds to a moment magnitude of 9.15. With a rupture duration of 600 seconds, the fault-rupture models represent seismic observations adequately but underpredict geodetic displacements that argue for slow fault motion beneath the Nicobar and Andaman islands.

Probabilistic Tomography Maps Chemical Heterogeneities Throughout the Lower Mantle

We obtained likelihoods in the lower mantle for long-wavelength models of bulk sound and shear wave speed, density, and boundary topography, compatible with gravity constraints, from normal mode splitting functions and surface wave data. Taking into account the large uncertainties in Earth's thermodynamic reference state and the published range of mineral physics data, we converted the tomographic likelihoods into probability density functions for temperature, perovskite, and iron variations. Temperature and composition can be separated, showing that chemical variations contribute to the overall buoyancy and are dominant in the lower 1000 kilometers of the mantle.

Zoned mantle convection

We review the present state of our understanding of mantle convection with respect to geochemical and geophysical evidence and we suggest a model for mantle convection and its evolution over the Earth's history that can reconcile this evidence. Whole-mantle convection, even with material segregated within the D" region just above the core-mantle boundary, is incompatible with the budget of argon and helium and with the inventory of heat sources required by the thermal evolution of the Earth. We show that the deep-mantle composition in lithophilic incompatible elements is inconsistent with the storage of old plates of ordinary oceanic lithosphere, i.e. with the concept of a plate graveyard. Isotopic inventories indicate that the deep-mantle composition is not correctly accounted for by continental debris, primitive material or subducted slabs containing normal oceanic crust. Seismological observations have begun to hint at compositional heterogeneity in the bottom 1000 km or so of the mantle, but there is no compelling evidence in support of an interface between deep and shallow mantle at mid-depth. We suggest that in a system of thermochemical convection, lithospheric plates subduct to a depth that depends - in a complicated fashion - on their composition and thermal structure. The thermal structure of the sinking plates is primarily determined by the direction and rate of convergence, the age of the lithosphere at the trench, the sinking rate and the variation of these parameters over time (i.e. plate-tectonic history) and is not the same for all subduction systems. The sinking rate in the mantle is determined by a combination of thermal (negative) and compositional buoyancy and as regards the latter we consider in particular the effect of the loading of plates with basaltic plateaux produced by plume heads. Barren oceanic plates are relatively buoyant and may be recycled preferentially in the shallow mantle. Oceanic plateau-laden plates have a more pronounced negative buoyancy and can more easily founder to the very base of the mantle. Plateau segregation remains statistical and no sharp compositional interface is expected from the multiple fate of the plates. We show that the variable depth subduction of heavily laden plates can prevent full vertical mixing and preserve a vertical concentration gradient in the mantle. In addition, it can account for the preservation of scattered remnants of primitive material in the deep mantle and therefore for the Ar and (3)He observations in ocean-island basalts.

The thermochemical structure and evolution of Earth's mantle: constraints and numerical models

Geochemical observations place several constraints on geophysical processes in the mantle, including a requirement to maintain several distinct reservoirs. Geophysical constraints limit plausible physical locations of these reservoirs to a thin basal layer, isolated deep 'piles' of material under large-scale mantle upwellings, high-viscosity blobs/plums or thin strips throughout the mantle, or some combination of these. A numerical model capable of simulating the thermochemical evolution of the mantle is introduced. Preliminary simulations are more differentiated than Earth but display some of the proposed thermochemical processes, including the generation of a high-mu mantle reservoir by recycling of crust, and the generation of a high-(3)He/(4)He reservoir by recycling of residuum, although the resulting high-(3)He/(4)He material tends to aggregate near the top, where mid-ocean-ridge melting should sample it. If primitive material exists as a dense basal layer, it must be much denser than subducted crust in order to retain its primitive (e.g. high-(3)He) signature. Much progress is expected in the near future.

Sharp sides to the African superplume

Beneath southern Africa is a large structure about 1200 kilometers across and extending obliquely 1500 kilometers upward from the core-mantle boundary with a shear velocity reduction of about 3%. Using a fortuitous set of SKS phases that travel along its eastern side, we show that the boundary of the anomaly appears to be sharp, with a width less than 50 kilometers, and is tilted outward from its center. Dynamic models that fit the seismic constraints have a dense chemical layer within an upwardly flowing thermal structure. The tilt suggests that the layer is dynamically unstable on geological time scales.