Asymmetric intermolecular allylic C-H amination of alkenes with aliphatic amines

Direct Amination of Anilines Utilizing Dearomatized Phenolate Species

Activation of the aryl C-N bond underpins critical challenges in modern organic synthesis. Herein, the direct amination of anilines is presented via hypervalent iodine-mediated transient dearomatized phenolate intermediates, enabling selective C(aryl)-NH2 bond cleavage under mild conditions. A library of bioactive p-alkylaminophenols is synthesized in up to 85% yields within 3 h. Being used in late-stage drug diversification and mechanistic studies, this protocol offers a modular platform for complex amine construction.

Solvent-Controlled Enantioselective Allylic C-H Alkylation of 2,5-Dihydrofuran via Synergistic Palladium/Nickel Catalysis

Enantioenriched, substituted tetrahydrofuran skeletons extensively occur in natural products, bioactive targets, and organic frameworks. The rapid and diverse synthesis of these tetrahydrofuran molecules is highly desired yet challenging. Herein, we present a practical synthetic strategy for asymmetric allylic C-H bond functionalization of oxyheterocyclic alkenes by making use of the synergistic catalysis of achiral Pd complex and chiral N,N'-dioxide-Ni(II) catalyst. Notably, the chemodivergent synthesis of allylic C-H alkylated products and hydroalkylated products was readily achieved in good outcomes via the regulation of solvents. Furthermore, the post-transformation of these functionalized 2,5-dihydrofurans provides an innovative synthetic route to access tetrahydrofuran skeleton compounds containing multiple stereocenters.

Ternary Aldehyde-Copper-Iridium Catalysis Enables Stereodivergent Allylation via α-C-H Functionalization of Primary Amines

α-Chiral primary amines are recognized as one of the most valuable and versatile synthetic intermediates, widely utilized in the construction of diverse amine-containing natural products, pharmaceuticals, and agrochemicals. The direct asymmetric α-C-H functionalization of unprotected primary amines is the most straightforward method for creating these motifs. However, this transformation remains underdeveloped, particularly in stereodivergent synthesis of primary amines with multiple stereocenters. Herein, we report an aldehyde/copper/iridium ternary catalytic system, which was successfully employed for the direct enantio- and diastereodivergent α-allylation of primary α-amino-chromanone without requiring additional protection or activation of the NH2 group. A wide range of α-tertiary primary amines bearing vicinal stereocenters were prepared in high yields with excellent enantio- and diastereoselectivities (generally >20:1 dr and >99% ee). Notably, all four stereoisomers of the α-tertiary amines can be readily prepared by simply switching the configuration combinations of the two chiral metal catalysts. Furthermore, the asymmetric induction model for the α-C-H functionalization of primary amines was meticulously elucidated through comprehensive density functional theory (DFT) calculations.

Copper-Catalyzed Allylic Amination of Alkenes Using O-Acylhydroxylamines: A Direct Entry to Diverse N-Alkyl Allylamines

We report a copper-catalyzed direct allylic amination of alkenes using readily available O-benzyolhydroxylamines as the alkylamine precursors and internal oxidant. A range of primary and secondary alkylamines can be installed onto diversely substituted alkenes for rapid construction of N-alkyl allylamines. Mechanistic studies support that the reaction engages an initial electrophilic amination to alkenes with anti-Markovnikov selectivity and subsequently a regioselective oxidative elimination to furnish the double bond transposition. In the electrophilic amination step, the use of strong Brønsted acid is critical for generating the key aminium radical cation (ARC) species.

Mechanistic Insights into Copper-Catalyzed Asymmetric Cyanation of Allylic C-H Bonds

Direct C-H bond functionalization has emerged as one of the most powerful and practical strategies for the modification of drug molecules. We have recently disclosed a Cu/NFAS (NFAS = N-fluoroalkyl sufonamide) catalytic system that exhibits high site-, regio-, and enantioselectivity for the direct cyanation of allylic C-H bonds. Here, we present a mechanistic investigation of this catalyst system, including the elucidation of side reactions involved in the transformation. This work focuses on an in-depth analysis of the catalytic cycle based on kinetic studies by NMR spectroscopy and characterization of the catalyst speciation by EPR and UV-vis spectroscopy. These studies indicate that a fraction of NFAS is sacrificed to the side reactions of the Cu(II)-bounded N-centered radical (Cu(II)-NCR) species for the generation of silylated sulfonamides and (CN)2. The data also show a great dependence of the reaction yield and selectivity (hydrogen atom abstraction or HAA over side reactions) on the structure of the Cu(II)-NCR species. Kinetic studies and DFT calculations further reveal that oxidation of the CuCN species by NFAS, HAA process, and cyanation of Cu(II)-NCRs with TMSCN have comparable energy barriers, which collectively determine the rate of the overall C-H cyanation reaction.

Regiodivergent and Enantioselective Allylic C-H Alkylation of Allyl Ethers: Optimization, Scope, Mechanism and Application

Vinyl ethers and allyl ethers are important motifs in natural products and pharmaceuticals. Among various methods toward their synthesis, direct allylic C-H functionalization of allyl ethers is one of the most efficient approaches. In this study, one of two regioisomers, a vinyl ether or an allyl ether, could be obtained, depending on whether a Lewis acid co-catalyst was present. Furthermore, branched allyl ethers were smoothly prepared in excellent regio- and enantioselectivity (up to 20 : 1 b/l, 99 % ee) by synergistic catalysis with an achiral Pd(0) complex and a chiral Lewis acid catalyst.

A Versatile Carbonylative Approach to Ureas and Carbamates through Light Activated Nickel Catalyzed Formation of Aliphatic Isocyanates

We describe the development of a nickel-catalyzed route to prepare aliphatic isocyanates via carbonylation chemistry. Unlike thermal reactions, where the affinity of Ni(0) for carbon monoxide has traditionally limited its use in carbonylations, mechanistic studies suggest that visible light excitation of a Xantphos-bound nickel catalyst can enable a radical pathway for the carbonylation of alkyl halides, while the CO-bound nickel drives the formation of a reactive acyl azide product for rapid Curtius rearrangement. Coupling this transformation with subsequent nucleophilic reactions has opened a unique and modular pathway to apply carbonylations to the synthesis of an array of diversely substituted, unsymmetrical ureas and carbamates, including those of relevance to drug design.

Photoinduced copper-catalysed enantioselective amination of allylic and propargylic C-H bonds

The hydrogen atom transfer (HAT)-mediated strategy has emerged as a straightforward and powerful approach for oxidative C-H bond functionalization. However, despite remarkable progress in this field, enantioselective allylic and propargylic C-H aminations remain a challenge. In this study, we developed highly enantioselective allylic and propargylic C-H aminations by combining a visible light-activated HAT process with copper catalysis. Using this method, a wide range of alkenes and alkynes can be converted into high-value chiral allylic and propargylic amines with high enantio-, regio-, and E/Z-selectivity. These enantio-enriched amines serve as versatile building blocks in organic synthesis and hold significant potential for applications in the synthesis of pharmaceuticals, natural products and other bioactive molecules.

Palladium-Catalyzed Transfer Iodination from Aryl Iodides to Nonactivated C(sp3)-H Bonds

We report a new strategy for the catalytic iodination of nonactivated C(sp3)-H bonds. The method merges the concepts of shuttle and light-enabled palladium catalysis to employ aryl iodides as both hydrogen atom transfer reagents and iodine donors. A noncanonical Pd0/PdI catalytic cycle is harnessed to transfer iodine from a C(sp2) to a C(sp3)-H bond under mild conditions, which tolerate sensitive functional groups. This mechanism is also applied to implement a C(sp3)-H thiolation that exploits reversible steps of the system.

Asymmetric Amination of 1,2-Diol through Borrowing Hydrogen: Synthesis of Vicinal Amino α-Tertiary Alcohol

Methods to prepare vicinal amino alcohols are important because of their presence in biologically active compounds. Despite the development of various methods for vicinal amino alcohol synthesis, C(sp3)-rich oxygen-containing β-amine compounds continue to pose great challenge. While ring-opening reaction of epoxides with amine nucleophile is the prime method for vicinal amino alcohol preparation, epoxides are highly reactive and sometimes difficult to make, resulting in drawbacks regarding selectivity of this approach. Here, we report a catalytic enantio-convergent amination of α-tertiary 1,2-diols for the efficient access to vicinal amino α-tertiary alcohols. The racemic α-tertiary 1,2-diol substrates of different alkyl/aryl or alkyl/alkyl backbone, can be converted to chiral vicinal amino α-tertiary alcohols through diphenyl phosphate-mediated RuCl3 catalysed asymmetric borrowing hydrogen (ABH) pathway. This simple ABH reaction can be scaled up to the synthesis of chiral ligands, synthetic intermediates, and other medicinally-relevant compounds. Overall, this catalytic redox-neutral procedure broadens the scope of Ru-catalysed amination of alcohols and discloses an underexplored step- and atom-economical synthetic strategy for the synthesis of vicinal amino α-tertiary alcohols and provides a practicable alternative to the present benchmark procedures.

Catalysis in the Excited State: Bringing Innate Transition Metal Photochemistry into Play

Transition metal catalysis is an indispensable tool for organic synthesis that has been harnessed, modulated, and perfected for many decades by careful selection of metal centers and ligands, giving rise to synthetic methods with unparalleled efficiency and chemoselectivity. Recent developments have demonstrated how light irradiation can also be recruited as a powerful tool to dramatically alter the outcome of catalytic reactions, providing access to innovative pathways with remarkable synthetic potential. In this context, the adoption of photochemical conditions as a mainstream strategy to drive organic reactions has unveiled exciting opportunities to exploit the rich excited-state framework of transition metals for catalytic applications. This Perspective examines advances in the application of transition metal complexes as standalone photocatalysts, exploiting the innate reactivity of their excited states beyond their common use as photoredox catalysts. An account of relevant examples is dissected to provide a discussion on the electronic reorganization, the orbitals involved, and the associated reactivity of different types of excited states. This analysis aims to provide practitioners with fundamental principles and guiding strategies to understand, design, and apply light-activation strategies to homogeneous transition metal catalysis for organic synthesis.

Illuminating Palladium Catalysis

ConspectusThe past decade has witnessed significant advancements of visible-light-induced photocatalysis, establishing it as a powerful and versatile tool in organic synthesis. The major focus of this field has centered on the development of methodologies that either rely solely on photocatalysts or combine photocatalysis with other catalytic methods, such as transition metal catalysis, to address a broader and more diverse array of transformations. Within this rapidly evolving area, a subfield that we refer to as transition metal photocatalysis has garnered significant attention due to its growing impact and mechanistic uniqueness. A distinguishing feature of this subfield is the dual functionality of a single transition metal complex, which not only acts as a photocatalyst to initiate photochemical processes but also functions as a traditional catalyst, facilitating key bond-breaking and bond-forming events. As such, an exogenous photocatalyst is not required in transition metal photocatalysis. However, the implications of harnessing both the excited- and ground-state reactivities of the transition metal complex can extend beyond this simplification. One of the most compelling aspects of this area is that photoexcited transition metal complexes can exhibit unique reactivities inaccessible through conventional thermal or dual photocatalytic approaches. These distinct reactivities can be leveraged to accomplish novel transformations either by engaging an entirely different substrate pool or by unlocking new reactivities of known substrates.In 2016, our group pioneered the use of phosphine-ligated palladium catalysts that can be photoexcited upon visible-light irradiation to engage diverse substrates in radical reactions. In our initial discovery, we showed that photoexcitation can redirect the well-established oxidative addition of a Pd(0) complex into aryl iodides toward an unprecedented radical process, generating hybrid aryl Pd(I) radical species. We subsequently extended this novel strategy to the formation of alkyl radicals from alkyl halides. These reactive radical intermediates have been harnessed in a wide variety of transformations, including desaturation, alkyl Heck reactions, and alkene difunctionalization cascades, among others.Seeking to further expand this new avenue, we achieved the first example of asymmetric palladium photocatalysis in the context of allylic C-H amination, where the palladium catalyst now plays triple duty by additionally controlling the stereochemical outcome of the reaction. In parallel to reaction discovery, we have also established that diazo compounds, strained molecules, and electron-deficient alkenes can serve as alkyl radical precursors beyond organic halides and redox-active esters. Notably, the engagement of electron-deficient alkenes has been made possible by the photoinduced hydricity enhancement of Pd-H species, representing a new mode of photoexcited reactivity.This Account presents our discovery and development of visible-light-induced palladium catalysis, organized by the type of transformations explored. Given the rapid progress in the field, we anticipate that this Account will provide readers with guiding principles and inspiration for designing and developing more efficient and novel transformations.

Unified approaches in transition metal catalyzed C(sp3)-H functionalization: recent advances and mechanistic aspects

In organic synthesis, C(sp3)-H functionalization is a revolutionary method that allows direct alteration of unactivated C-H bonds. It can obviate the need for pre-functionalization and provides access to streamlined and atom economical routes for the synthesis of complex molecules starting from simple starting materials. Many strategies have evolved, such as photoredox catalysis, organocatalysis, non-directed C-H activation, transiently directed C-H activation, and native functionality directed C-H activation. Together these advances have reinforced the importance of C(sp3)-H functionalization in synthetic chemistry. C(sp3)-H functionalization has direct applications in pharmacology, agrochemicals, and materials science, demonstrating its ability to transform synthetic approaches by creating new retrosynthetic disconnections and boost the efficiency of chemical processes. This review aims to provide an overview of current state of C(sp3)-H functionalization, focusing more on recent breakthroughs and associated mechanistic insights.

HFIP-mediated cascade aminomethylation and intramolecular cyclization of allenamides with N,O-acetals to access tetrahydro-β-carboline derivatives

The construction of complex molecules under metal-free conditions via multiple bond-forming steps in a cascade manner is highly desirable. Herein, we have developed an HFIP-alone promoted aminomethylation and intramolecular cyclization of allenamides, providing biologically relevant tetrahydro-β-carboline derivatives embedded with an allylic amine functionality. The metal-free protocol provided the desired tetrahydro-β-carboline derivatives under mild conditions. The potential of the protocol is further highlighted by the gram-scale reaction and synthesizing derivatives of biologically important molecules.

Stereospecific 3-Aza-Cope Rearrangement Interrupted Asymmetric Allylic Substitution-Isomerization

Transition-metal catalyzed asymmetric allylic substitution with alkyl and heteroaryl carbon nucleophiles has been well-established. However, the asymmetric allylic arylation of acyclic internal alkenes with aryl nucleophiles remains challenging and underdeveloped. Herein we report a stereospecific 3-aza-Cope rearrangement interrupted asymmetric allylic substitution-isomerization (Int-AASI) that enables asymmetric allylic arylation. By means of this stepwise strategy, both enantioenriched allylic arylation products and axially chiral alkenes could be readily obtained in high enantioselectivities. Experimental studies support a mechanism involving a cascade of asymmetric allylic amination, stereospecific 3-aza-Cope rearrangement and alkene isomerization. Density functional theory studies detailed the reasons of achieving the high chemoselectivity, regioselectivity, stereoselectivity and stereospecificity, respectively.

Pd-Catalyzed Allylic Substitution of Azo-Ene Adducts Enables Net Allylic C-H Alkylation of Allylic Alcohols

We present a protocol for a regioselective allylic C-H alkylation of allylic alcohols, consisting of a sequential azo-ene reaction and attendant Pd-catalyzed allylic substitution with Grignard reagents. Notable features of this work include: (1) regioselective C(sp3)-C(sp3) bond formation is achieved under Pd-catalysis, and (2) the allylic substitution proceeds with retention of configuration at the electrophilic allylic carbon as well as the olefin geometry.

Enantioselective Three-Component α-Allylic Alkylation of α-Amino Esters by Synergistic Photoinduced Pd/Carbonyl Catalysis

Photoinduced excited-state Pd catalysis has emerged as an intriguing strategy for unlocking new reactivity potential of simple substrates. However, the related transformations are still limited and the enantiocontrol remains challenging. Organocatalysis displays unique capability in substrate activation and stereocontrol. Combination of organocatalysis and photoinduced excited-state Pd catalysis may provide opportunities to develop new enantioselective reactions from simple substrates. By applying cooperative triple catalysis including excited-state Pd catalysis, ground-state Pd catalysis, and carbonyl catalysis, we have successfully realized enantioselective α-allylic alkylation of α-amino esters with simple styrene and alkyl halide starting materials. The reaction allows rapid modular assembly of the three reaction partners into a variety of chiral quaternary α-amino esters in good yields with 90-99 % ee, without protecting group manipulations at the active NH2 group. The cooperation of the chiral pyridoxal catalyst and the chiral phosphine ligand accounts for the excellent chirality induction.

Allylic C-H oxygenation of unactivated internal olefins by the Cu/azodiformate catalyst system

Allylic ethers and alcohols are essential structural motifs commonly present in natural products and pharmaceuticals. Direct allylic C-H oxygenation of internal alkenes is one of the most direct methods, bypassing the necessity for an allylic leaving group that is needed in the traditional Tsuji-Trost reaction. Herein, we develop an efficient and practical method for synthesizing (E)-allyl ethers from readily available internal alkenes and alcohols or phenols via selective allylic C-H oxidation. Key advances include the use of a Cu/Azodiformate catalyst system to facilitate remote allylic C-H activation and the achievement of excellent chemoselectivity through a dynamic ligand exchange strategy using a bis(sulfonamide) ligand. This method features a broad substrate scope and functional group tolerance, successfully applied to the synthesis of various challenging medium-sized cyclic ethers (7-10 members) and large-ring lactones (14-20 members), with high regioselectivity and stereoselectivity.

Monitoring Radical Intermediates in Photoactivated Palladium-Catalyzed Coupling of Aryl Halides to Arenes by an Aryl Radical Assay

An aryl radical assay is used to provide information about the formation of aryl radicals from aryl halides in coupling reactions to arenes in the presence of palladium sources and under LED irradiation (λ = 456 nm). The assay uses 2-halo-m-xylenes as substrates. Aryl radical formation is indicated both by a defined product composition and by signature deuterium isotope effects. Comparison with our recently published results for corresponding ground-state palladium-catalyzed reactions shows three principal differences: (i) in the photoactivated reactions, evidence supports the formation of aryl radical intermediates with all the phosphine ligands tested, in contrast to thermal ground-state chemistry where only specific ligands had encouraged this pathway, while others had promoted a nonradical coupling mechanism; (ii) oxidative addition complexes that are formed from the reaction of Pd(0) sources with aryl halides react under photoactivation to form biaryl coupled products through radical intermediates, in contrast to their behavior under thermal activation - so Ar-Pd bonds are homolyzed under LED irradiation; (iii) the photoreactions work well with mild bases like Cs2CO3, while the thermal reactions required KOtBu as the base due to the different roles for base under the thermal versus photochemical mechanisms.

Photoinduced Pd-Catalyzed 1,4-Dicarbofunctionalization of 1,3-Butadienes via Aliphatic C-H Bond Elaboration

A three-component coupling strategy for 1,4-dicarbofunctionalization of 1,3-butadiene with C-H bearing substrates has been developed using photoinduced Pd catalysis, with aryl bromide serving as the hydrogen atom transfer (HAT) reagent. This photocatalytic coupling process achieves functionalized oxindole motifs in good yield and regioselectivity under mild reaction conditions. The versatility and synthetic utility of this method are demonstrated through the addition of a variety of C-H-bearing partners and various oxindole substrates to both substituted and unsubstituted butadiene.

Photoinduced Regiodivergent and Enantioselective Cross-Coupling of Glycine Derivatives with Hydrocarbon Feedstocks

Regiodivergent asymmetric synthesis represents a transformative strategy for the efficient generation of structurally diverse chiral products from a single set of starting materials, significantly enriching their enantiomeric composition. However, the design of radical-mediated regiodivergent and enantioselective reactions that can accommodate a wide range of functional groups and substrates has posed significant challenges. The obstacles primarily lie in switching the regioselectivity and achieving high enantiodiscrimination, especially when dealing with high-energy intermediates. To address these issues, we have developed a new catalytic system that integrates photoinduced hydrogen atom transfer (HAT) and chiral copper catalysis, involving the fine-tuning of chiral ligands, additives, and other reaction parameters. The strategy facilitates regiodivergent and enantioselective cross-couplings between N-aryl glycine ester/amide derivatives and abundant hydrocarbon feedstocks through strong C(sp3)-H bond activation. This approach allows for the controlled and stereoselective formation of C(sp3)-C(sp3) and C(sp3)-N bonds, yielding a rich variety of C- or N-alkylated glycine esters and amides with commendable yields (up to 92% yield), exclusive regioselectivities (typically >20:1 rr), and high enantioselectivities (up to 96% ee). Our methodology not only provides a promising avenue for the stereoselective incorporation of alkyl functionalities onto specific sites of biologically significant molecules but also offers a practical approach for regioselectivity switching while simultaneously achieving high asymmetric induction within photochemical reactions.

Asymmetric Catalytic Synthesis of Allylic Sulfenamides from Vinyl α-Diazo Compounds by a Rearrangement Route

The asymmetric rearrangement of allylic sulfilimines is an effective route to synthetically attractive targets, such as allylic sulfenamides. The current methods are limited to chirality transfer from chiral allylic sulfilimine precursors. Herein, we report a general and fundamentally new rearrangement route to access optically enriched allylic sulfenamides and their derivatives. The process involves S-alkylation and an unusual S-to-N rearrangement step. A chiral nickel complex enables the transformation of a broad scope of sulfenamides and vinyl α-diazo pyrazoleamides under mild conditions. Various allylic sulfenamides have been synthesized with excellent γ-regioselectivity and enantioselectivity, and can be efficiently converted into sulfinamide and 4-aminobutenoic acid derivatives. In addition, DFT calculations demonstrate the connection between the spin state and conformation of the nickel vinyl carbenoid, as well as an unknown rearrangement process.

General (hetero)polyaryl amine synthesis via multicomponent cycloaromatization of amines

(Hetero)polyaryl amines are extensively prevalent in pharmaceuticals, fine chemicals, and materials but the intricate and varied nature of their structures severely restricts their synthesis. Here, we present a selective multicomponent cycloaromatization of structurally and functionally diverse amine substrates for the general and modular synthesis of (hetero)polyaryl amines through copper(I)-catalysis. This strategy directly constructs a remarkable range of amino group-functionalized (hetero)polyaryl frameworks (194 examples), including naphthalene, binaphthalene, phenanthren, benzothiophene, dibenzothiophene, benzofuran, dibenzofuran, quinoline, isoquinoline, quinazoline, and others, which are challenging or impossible to obtain using alternative methods. Copper(III)-acetylide species are involved in driving the exclusive 7-endo-dig cyclization, suppressing many side-reactions that are susceptible to occur. Due to the easy introduction of various functional units into heteropolyarylamines, multiple functionalized fluorescent dyes can be arbitrarily synthesized, which can serve as effective fluorescent probes for monitoring the pathological processes (e.g. chemotherapy-induced cell apoptosis) and studying the related disease mechanisms.

Halide Perovskite Induces Halogen/Hydrogen Atom Transfer (XAT/HAT) for Allylic C-H Amination

Allylic C-H amination has emerged as a powerful tool to construct allylamines, common motifs in molecular therapeutics. Such reaction implies an oxidative path for C-H activation but furnishes reductive amines, inferring mild oxidants' inactivity for C-H oxidation but strong oxidants' detriment to products. Herein we report a heterogeneous catalytic approach that manipulates halogen-vacancies of perovskite photocatalyst and exploits halogenated-solvents (i.e. CH2Cl2, CH2Br2) as mild oxidants for selective C-H allyl amination with 19,376 turnovers. CsPbBr3 nanocrystals induce cooperative hydrogen-atom-transfer (HAT, C-H oxidation, and halogen-vacancy CsPbBr3-x formation) and halogen-atom-transfer (XAT, CsPbBr3-x-induced solvent reduction) under a radical chain mechanism. Terminal/internal olefins are amenable to forge aromatic/aliphatic, cyclic/acyclic, secondary/tertiary allylamines (70 examples), including drugs or their derivatives.

Photoinduced Pd-Catalyzed Direct Sulfonylation of Allylic C-H Bonds

Allylic sulfones are valuable motifs due to their medicinal and biological significance and their versatile chemical reactivities. While direct allylic C-H sulfonylation represents a straightforward and desirable approach, these methods are primarily restricted to terminal alkenes, leaving the engagement of the internal counterparts a formidable challenge. Herein we report a photocatalytic approach that accommodates both cyclic and acyclic internal alkenes with diverse substitution patterns and electronic properties. Importantly, the obtained allylic sulfones can be readily diversified into a wide range of products, thus enabling formal alkene transposition and all-carbon quaternary center formation through the sequential C-H functionalization.

Chiral pyrrolidines via an enantioselective Hofmann-Löffler-Freytag reaction

Radical C-H aminations enable rapid access to the most common heterocycles in medicines (e.g. pyrrolidines), yet stereocontrol of these powerful transformations remains a challenge. Here, we report the discovery of the first enantio- and regio- selective C-H imination, which readily converts ketones to enantioenriched pyrrolidines. This enantioselective Hofmann-Löffler-Freytag reaction mechanism entails iminyl radical generation from an oxime by a chiral Cu catalyst that facilitates 1,5-H-atom transfer (HAT) to form a remote C-radical, regioselectively. The selective capture of this alkyl radical as an organocopper(III) complex then mediates highly stereoselective reductive elimination to unprotected pyrrolines. The broad steric and electronic scope of this remote C-H amination has been probed systematically, along with key mechanistic aspects of enantiodetermination, radical intermediacy, and atypical Cu(III) ligands that enable this uniquely selective C-N coupling. Importantly, either (1) reductions or (2) nucleophilic additions to these enantioenriched pyrrolines provide the most rapid syntheses of chiral pyrrolidines to date.

Highly Dispersed Pd@ZIF-8 for Photo-Assisted Cross-Couplings and CO2 to Methanol: Activity and Selectivity Insights

Our study unveils a pioneering methodology that effectively distributes Pd species within a zeolitic imidazolate framework-8 (ZIF-8). We demonstrate that Pd can be encapsulated within ZIF-8 as atomically dispersed Pd species that function as an excited-state transition metal catalyst for promoting carbon-carbon (C-C) cross-couplings at room temperature using visible light as the driving force. Furthermore, the same material can be reduced at 250 °C, forming Pd metal nanoparticles encapsulated in ZIF-8. This catalyst shows high rates and selectivity for carbon dioxide hydrogenation to methanol under industrially relevant conditions (250 °C, 50 bar): 7.46 molmethanol molmetal -1 h-1 and >99 %. Our results demonstrate the correlations of the catalyst structure with the performances at experimental and theoretical levels.

Photoinduced Copper-Catalyzed Enantioselective Allylic C(sp3)-H Oxidation of Acyclic 1-Aryl-2-alkyl Alkenes as Limiting Substrates

Herein, we disclose a simple copper-catalyzed method for enantioselective allylic C(sp3)-H oxidation of unsymmetrical acyclic alkenes, specifically 1-aryl-2-alkyl alkenes. The C-H substrates are used in limiting amounts, and the products are obtained with high enantioselectivity, E/Z-selectivity, and regioselectivity. The method exhibits broad functional group tolerance, and E/Z-alkene mixtures are suitable C-H substrates. The transformation is enabled by light irradiation, which sustains the enantioselective copper catalysis by photoinduced oxidant homolysis.

Synchronous recognition of amines in oxidative carbonylation toward unsymmetrical ureas

Unsymmetrical ureas are commonly found in pharmaceuticals and bioactive compounds. However, devising strategies to introduce two distinct amines selectively in the construction of unsymmetrical ureas remains a challenge. In this work, we use a synchronous recognition strategy that takes advantage of radical and nucleophilic activation to discriminate between secondary and primary amines. Specifically, a copper catalyst preferentially oxidizes secondary amines to radical species, whereas a cobalt catalyst carbonylates primary amines to produce cobalt amides. Coupling these fragments by cooperative catalysis produces unsymmetrical ureas with high selectivity, as showcased by the modification of 41 biologically active compounds and six drugs.

Molybdenum Complex-Catalyzed N-Alkylation of Bulky Primary and Secondary Amines

Aliphatic allylic amines are present in a large number of complex and pharmaceutically relevant molecules. The direct amination of allylic electrophiles serves as the most common method toward the preparation of these motifs. However, the use of feedstock reaction components (allyl alcohol and aliphatic amine) in these transformations remains a great challenge. Such a challenge primarily stems from the high Lewis basicity and large steric hindrance of aliphatic amines, in addition to the low reactivity of allylic alcohols. Herein, we report a general solution to these challenges. The developed protocol allows an efficient allylic amination of allyl alcohols with sterically bulky aliphatic amines in the presence of an inexpensive earth-abundant molybdenum complex. This simple and economic protocol also enables regioselective branched amination; the practicality of the reaction was shown in an efficient, scaled-up synthesis of several drugs.

Iodine(III)-Mediated Photochemical C-H Azolation

A systematic radical polarity analysis framework is formulated herein for the projection of radical reactivity patterns. An iodine(III)-mediated photochemical C-H azolation reaction has been envisaged and developed based on the set of empirical guidelines. The synthesis features an environmentally benign reagent, mild reaction conditions, an operationally simple protocol, and a broad substrate scope. The inclusive demonstration of reactivity for ether, thioether, amide, benzylic, and allylic C-H bonds promises wide-ranging synthetic utility.

Enhanced electrocatalytic CH amination of toluene via tailored interfacial microenvironment

Electrocatalytic CH amination of hydrocarbons is a promising avenue for the synthesis of high-value CN compounds. However, efficient activation of CH bonds remains a significant challenge in electrocatalytic CN coupling. Herein, we present a novel strategy to enhance the electrocatalytic conversion of toluene to N-benzylacetamide through a Ritter-type reaction by engineering a hydrophobic electrode-electrolyte interface using polytetrafluoroethylene (PTFE)-coated carbon paper (CP). The hydrophobic CP-based electrode exhibited a superior N-benzylacetamide productivity of 1860.9 mmol m-2h-1 and a substantially higher Faradaic efficiency (FE) of 70.1 % compared to pure CP (41.5 %). Experimental results and density functional theory (DFT) calculations reveal that the PTFE coating promotes toluene adsorption and efficiently lowers the energy barrier for toluene dehydrogenation. Additionally, the hydrophobic interface effectively hinders water adsorption on the electrode, suppressing the competitive water oxidation reaction. This study underscores the crucial role of interfacial engineering in optimizing electrocatalytic CN coupling reactions for the sustainable synthesis of high-value amide compounds.

Pd-Catalyzed 1,4-Difluoromethylative Functionalization of 1,3-Dienes Using Freon-22

We report a visible-light-driven, palladium-catalyzed 1,4-difluoromethylative functionalization of conjugated dienes using chlorodifluoromethane (ClCF2H, Freon-22) as a cost-effective difluoromethyl source. The excited palladium catalyst efficiently reduces the C-Cl bond, which generates a CF2H radical, followed by regioselective SN2' substitution to afford 1,4-difunctionalized products. This versatile, redox-neutral method accommodates diverse nucleophiles and exhibits broad functional group compatibility, making it suitable for late-stage functionalization in drug discovery and offering a direct route to difluoromethylated molecules.

Photoinduced Electron Donor Acceptor Complex-Enabled α-C(sp3)-H Alkenylation of Amines

Allylic amines are prevalent and vital structural components present in many bioactive compounds and natural products. Additionally, they serve as valuable intermediates and building blocks, with wide-ranging applications in organic synthesis. However, direct α-C(sp3)-H alkenylation of feedstock amines, particularly for the preparation of α-alkenylated cyclic amines, has posed a longstanding challenge. Herein, we present a general, mild, operationally simple, and transition-metal-free α-alkenylation of various readily available amines with alkenylborate esters in excellent E/Z - and diastereoselectivities. This method features good compatibility with water and oxygen, broad substrate scope, and excellent functional group tolerance, thereby enabling the late-stage modification of various complex molecules. Mechanistic studies suggest that the formation of a photoactive electron donor-acceptor complex between 2-iodobenzamide and the tetraalkoxyborate anion, which subsequently undergoes photoinduced single electron transfer and intramolecular 1,5-hydrogen atom transfer to generate the crucial α-amino radicals, is the key to success of this chemistry.

Visible light-induced ruthenium(ii)-catalyzed hydroarylation of unactivated olefins

Hydroarylation reactions have emerged as a valuable tool for the direct functionalization of C-H bonds with ideal atom economy. However, common catalytic variants for these transformations largely require harsh reaction conditions, which often translate into reduced selectivites. In contrast, we herein report on a photo-induced hydroarylation of unactivated olefins at room temperature employing a readily available ruthenium(ii) catalyst. Our findings include high position- and regio-selectivity and remarkable tolerance of a wide range of functional groups, which further enabled the late-stage diversification.

Enantioselective 1,2-Carboamination of 1,3-Dienes with N-Hydroxyphthalimide (NHP) Esters Enabled by a Photoinduced Pd Catalysis

Herein, a photoinduced, Pd-catalyzed direct 1,2-carboamination of conjugated 1,3-dienes has been successfully achieved. Sequential regioselective C-C bond and enantioselective C-N bond formation allows rapid assembly of a wide range of value-added chiral allylic amines from readily available N-hydroxyphthalimide (NHP) esters and 1,3-dienes under mild conditions. This developed protocol further demonstrates the versatility and potency of the photoexcited Pd catalytic system with a bifunctional reagent in the streamlined difunctionalization of C═C bonds.

Direct C(sp3)-H functionalization with aryl and alkyl radicals as intermolecular hydrogen atom transfer (HAT) agents

Recent years have witnessed the emergence of direct intermolecular C(sp3)-H bond functionalization using in situ generated aryl/alkyl radicals as a unique class of hydrogen atom transfer (HAT) agents. A variety of precursors have been exploited to produce these radical HAT agents under photocatalytic, electrochemical or thermal conditions. To date, viable aryl radical precursors have included aryl diazonium salts or aryl azosulfones, diaryliodonium salts, O-benzoyl oximes, aryl sulfonium salts, aryl thioesters, and aryl halides; and applicable alkyl radical sources have included tetrahalogenated methanes (e.g., CCl3Br, CBr4 and CF3I), N-hydroxyphthalimide esters, alkyl bromides, and acetic acid. This review summarizes the current advances in direct intermolecular C(sp3)-H functionalization through key HAT events with in situ generated aryl/alkyl radicals and categorizes the procedures by the specific radical precursors applied. With an emphasis on the reaction conditions, mechanisms and representative substrate scopes of these protocols, this review aims to demonstrate the current trends and future challenges of this emerging field.

Photoinduced Palladium-Catalyzed Radical Germylative Arylation of Alkenes with Chlorogermanes

We describe a visible light-induced palladium-catalyzed radical germylative arylation of alkenes with easily accessible chlorogermanes. This protocol provides expedient access to germanium-substituted indolin-2-ones in good to excellent yields under mild reaction conditions. The key step for this strategy lies in the reductive activation of germanium-chloride bonds with an excited palladium complex under visible light irradiation. The involvement of germanium radicals was evidenced by electron paramagnetic resonance spectroscopy experiments.

Rh-Catalyzed Enantioselective Single-Carbon Insertion of Alkenes

The interest in the discovery and development of skeletal editing processes that selectively insert, exchange, or delete an atom in organic molecules has significantly increased over the last few years. However, processes of this class that proceed through the creation of a chiral center with high asymmetric induction have been largely unexplored. Herein, we report an enantioselective single-carbon insertion in aryl- and alkyl-substituted alkenes mediated by a catalytically generated chiral Rh-carbynoid and phosphate nucleophiles that produce enantioenriched allylic phosphates (enantiomeric ratio (e.r.) = 89.5:10.5-99.5:0.5). The key to the process was a diastereo- and enantioselective cyclopropanation of the alkene with a chiral Rh-carbynoid and the formation of a transient cyclopropyl-I(III) intermediate. The addition of the phosphate nucleophile provided a cyclopropyl-I(III)-phosphate intermediate that undergoes disrotatory ring opening following the Woodward-Hoffmann-DePuy rules. This process led to a chiral intimate allyl cation-phosphate pair that evolved with excellent enantioretention. The evidence of an SN1-like SNi mechanism is provided by linear free-energy relationship studies, kinetic isotope effects, X-ray crystallography, and control experiments. We demonstrated the utility of the enantioenriched allylic phosphates in late-stage N-H allylations of natural products and drug molecules and in cross-coupling reactions that occurred with excellent enantiospecificity.

Regio- and enantioselective nickel-alkyl catalyzed hydroalkylation of alkynes

The migratory insertion of metal-hydride into alkene has allowed regioselective access to organometallics, readily participating in subsequent functionalization as one conventional pathway of hydroalkylation, whereas analogous process with feedstock alkyne is drastically less explored. Among few examples, the regioselectivity of metal-hydride insertion is mostly governed by electronic bias of alkynes. To alter the regioselectivity and drastically expand the intermediate pools that we can access, one aspirational design is through alternative nickel-alkyl insertion, providing opposite regioselectivity induced by steric demand. Leveraging in situ formed nickel-alkyl species, we herein report the regio- and enantioselective hydroalkylation of alkynes with broad functional group tolerance, excellent regio- and enantioselectivity, enabling efficient route to diverse valuable chiral allylic amines motifs. Preliminary mechanistic studies indicate the aminoalkyl radical species can participate in metal-capture and lead to formation of nickel-alkyl, of which the migratory insertion is key to reverse regioselectivity observed in metal-hydride insertion.

Site-Selective Carbonylative Cyclization with Two Allylic C-H Bonds Enabled by Radical Differentiation

Controlling the site-selectivity of C-H functionalization is of significant importance and a formidable undertaking in synthetic organic chemistry, motivating the continuing development of efficient and sustainable technologies for activating C-H bonds. However, methods that control the site-selectivity for double C-H functionalization are rare. We herein report a conceptually new method to achieve highly site-selective C-H functionalization by implementing a radical single-out strategy. Leveraging the steric hindrance-sensitive CO-insertion as the radical differentiation process, a site-selective and stereoselective carbonylative formal [2 + 2] cycloaddition of imines and alkenes by sequential double allylic C-H bond activation was established without special and complicated HAT-reagents. This reaction was compatible with a wide range of alkenes and imines with diverse skeletons to deliver allylic β-lactams that are of synthetic and medicinal interest.

Photoexcited Palladium-Catalyzed Deracemization of Allenes

The different enantiomers of specific chiral molecules frequently exhibit disparate biological, physiological, or pharmacological properties. Therefore, the efficient synthesis of single enantiomers is of particular importance not only to the pharmaceutical sector but also to other industrial sectors, such as agrochemical and fine chemical industries. Deracemization, a process during which a racemic mixture is converted into a nonracemic product with 100% atom economy and theoretical yield, is the most straightforward method to access enantioenriched molecules but a challenging task due to a decrease in entropy and microscopic reversibility. Axially chiral allenes bear a distinctive structure of two orthogonal cumulative π-systems and are acknowledged as synthetically versatile synthons in organic synthesis. The selective creation of axially chiral allenes with high optical purity under mild reaction conditions has always been a very popular and hot topic in organic synthesis but remains challenging. Herein, a photoexcited palladium-catalyzed deracemization of nonprefunctionalized disubstituted allenes is disclosed. This method provides an efficient and economical strategy to accommodate a broad scope of allenes with good enantioselectivities and yields (53 examples, up to 96% yield and 95% ee). The use of a suitable chiral palladium complex with visible light irradiation is an essential factor in achieving this transformation. A metal-to-ligand charge transfer mechanism was proposed based on control experiments and density functional theory calculations. Quantum mechanical studies implicate dual modes of asymmetric induction behind our new protocol: (1) sterically controlled stereoselective binding of one allene enantiomer under the ground-state and (2) facile, noncovalent interaction-driven excited-state isomerization toward the opposite enantiomer. The success of this newly established photochemical deracemization strategy should provide inspiration for expansion to other multisubstituted allenes and will open up a new mode for enantioselective excited-state palladium catalysis.

General Regio- and Diastereoselective Allylic C-H Oxygenation of Internal Alkenes

Branched allylic esters and carboxylates are fundamental motifs prevalent in natural products and drug molecules. The direct allylic C-H oxygenation of internal alkenes represents one of the most straightforward approaches, bypassing the requirement for an allylic leaving group as in the classical Tsuji-Trost reaction. However, current methods suffer from limited scope─often accompanied by selectivity issues─thus hampering further development. Herein we report a photocatalytic platform as a general solution to these problems, enabling the coupling of diverse internal alkenes with carboxylic acids, alcohols, and other O-nucleophiles, typically in a highly regio- and diastereoselective manner.

Selective 1,4-syn-Addition to Cyclic 1,3-Dienes via Hybrid Palladium Catalysis

1,4-cis-Disubstituted cyclic compounds play a pivotal role in pharmaceutical development, offering enhanced potency and bioavailability. However, their stereoselective and modular synthesis remains a long-standing challenge. Here, we report an innovative strategy for accessing these structures via mild conditions employing cyclic 1,3-dienes/alkyl(aryl)halides and amines. This procedure exhibits a wide substrate scope that tolerates various functional groups. The utility of this method is demonstrated in the efficient synthesis of a TRPV6 inhibitor, CFTR modulator, and other bioactive molecules. Combined experimental and computational studies suggest that the hybrid palladium-catalyzed radical-polar crossover mechanism is crucial for achieving exceptional 1,4-syn-addition selectivity (dr > 20:1).

Intermolecular Aza-Wacker Coupling of Alkenes with Azoles by Photo-Aerobic Selenium-π-Acid Multicatalysis

Herein, the intermolecular, photoaerobic aza-Wacker coupling of azoles with alkenes by means of dual and ternary selenium-π-acid multicatalysis is presented. The title method permits an expedited avenue toward a broad scope of N-allylated azoles and representative azinones under mild conditions with broad functional group tolerance, as is showcased in more than 60 examples including late-stage drug derivatizations. From a regiochemical perspective, the protocol is complementary to cognate photoredox catalytic olefin aminations, as they typically proceed through either allylic hydrogen atom abstraction or single electron oxidation of the alkene substrate. These methods predominantly result in C-N bond formations at the allylic periphery of the alkene or the less substituted position of the former π-bond (i.e., anti-Markovnikov selectivity). The current process, however, operates through a radical-polar crossover mechanism, which solely affects the selenium catalyst, thus allowing the alkene to be converted strictly through an ionic two-electron transfer regime under Markovnikov control. In addition, it is shown that the corresponding N-vinyl azoles can also be accessed by sequential or one-pot treatment of the allylic azoles with base, thus emphasizing the exquisite utility of this method.

Catalytic Asymmetric Cascade Dearomatization of Indoles via a Photoinduced Pd-Catalyzed 1,2-Bisfunctionalization of Butadienes

Photoinduced Pd-catalyzed bisfunctionalization of butadienes with a readily available organic halide and a nucleophile represents an emerging and attractive method to assemble versatile alkenes bearing various functional groups at the allylic position. However, enantiocontrol and/or diastereocontrol in the C-C or C-X bond-formation step have not been solved due to the open-shell process. Herein, we present a cascade asymmetric dearomatization reaction of indoles via photoexcited Pd-catalyzed 1,2-biscarbonfunctionalization of 1,3-butadienes, wherein asymmetric control on both the nucleophile and electrophile part is achieved for the first time in photoinduced bisfunctionalization of butadienes. This method delivers structurally novel chiral spiroindolenines bearing two contiguous stereogenic centers with high diastereomeric ratios (up to >20 : 1 dr) and good to excellent enantiomeric ratios (up to 97 : 3 er). Experimental and computational studies of the mechanism have confirmed a radical pathway involving excited-state palladium catalysis. The alignment and non-covalent interactions between the substrate and the catalyst were found to be essential for stereocontrol.

Recent advances in C(sp3)-N bond formation via metallaphoto-redox catalysis

The C(sp3)-N bond is ubiquitous in natural products, pharmaceuticals, biologically active molecules and functional materials. Consequently, the development of practical and efficient methods for C(sp3)-N bond formation has attracted more and more attention. Compared to the conventional ionic pathway-based thermal methods, photochemical processes that proceed through radical mechanisms by merging photoredox and transition-metal catalyses have emerged as powerful and alternative tools for C(sp3)-N bond formation. In this review, recent advances in the burgeoning field of C(sp3)-N bond formation via metallaphotoredox catalysis have been highlighted. The contents of this review are categorized according to the transition metals used (copper, nickel, cobalt, palladium, and iron) together with photocatalysis. Emphasis is placed on methodology achievements and mechanistic insight, aiming to inspire chemists to invent more efficient radical-involved C(sp3)-N bond-forming reactions.

Photoinduced Pd-Catalyzed Enantioselective Carboamination of Dienes via Aliphatic C-H Bond Elaboration

Three-component diene carboaminations offer a potent means to access synthetically valuable allylic amines with rapid molecular complexity escalation. The existing literature primarily discloses racemic examples, necessitating the use of halides/pseudohalides as substrates. This paper introduces a photoinduced Pd-catalyzed enantioselective three-component carboamination of aryl-substituted 1,3-dienes, leveraging aliphatic C-H bonds for rapid synthesis. The reaction employs 10 mol % of chiral palladium catalyst and an excess aryl bromide as the HAT reagent. This approach yields diverse chiral allylamines with moderate to excellent enantioselectivities. Notably, it stands as the first instance of an asymmetric three-component diene carboamination reaction, directly utilizing abundant C(sp3)-H bearing partners, such as toluene-type substrates, ethers, amines, esters, and ketones. The protocol exhibits versatility across amines, encompassing aliphatic, aromatic, primary, and secondary derivatives. This method could serve as a versatile platform for stereoselective incorporation of various nucleophiles, dienes, and C(sp3)-H bearing partners.

Blue-Light Induced Iron-Catalyzed Synthesis of γ,δ-Unsaturated Ketones

A visible-light-induced iron-catalyzed α-alkylation of ketones with allylic and propargylic alcohols as pro-electrophiles is reported. The diaminocyclopentadienone iron tricarbonyl complex plays a dual role by harvesting light and facilitating dehydrogenation and reduction steps without the help of any exogenous photosensitizer. γ,δ-Unsaturated ketones can now be accessed through this borrowing hydrogen methodology at room temperature. Mechanistic investigations revealed that the steric hindrance on the δ-position of either the dienone or ene-ynone intermediate is the key feature to prevent or decrease the competitive 1,6-reduction (and consequently the formation of the saturated ketone) and to favor the synthesis of a set of non-conjugated enones and ynones.

Direct synthesis of branched amines enabled by dual-catalyzed allylic C─H amination of alkenes with amines

Direct conversion of hydrocarbons into amines represents an important and atom-economic goal in chemistry for decades. However, intermolecular cross-coupling of terminal alkenes with amines to form branched amines remains extremely challenging. Here, a visible-light and Co-dual catalyzed direct allylic C─H amination of alkenes with free amines to afford branched amines has been developed. Notably, challenging aliphatic amines with strong coordinating effect can be directly used as C─N coupling partner to couple with allylic C─H bond to form advanced amines with molecular complexity. Moreover, the reaction proceeds with exclusive regio- and chemoselectivity at more steric hinder position to deliver primary, secondary, and tertiary aliphatic amines with diverse substitution patterns that are difficult to access otherwise.