New anti-infective coatings of medical implants

The Outcome of Sac Filling With Fibrin Sealant and Gentamicin After Endovascular Aortic Repair of Brucella-Related Aorto-Iliac Artery Aneurysms: A Retrospective Single-Center Study

PURPOSE

This study aimed to analyze the experience of our center and assess the efficacy of sac filling with fibrin sealant (FS) and gentamicin after endovascular aortic repair (EVAR) in patients with Brucella-related aorto-iliac artery aneurysms.

MATERIALS AND METHODS

All patients who received sac filling with FS and gentamicin after EVAR for Brucella-related aorto-iliac artery aneurysms between March 2019 and September 2022 were reviewed. Before and after sac filling with FS and gentamicin, aneurysm sac thrombosis and endoleak were evaluated using a preloaded catheter to monitor immediate repair outcome. Short- to mid-term outcomes were assessed by the incidence of vascular graft infection (VGI), all-cause mortality, maximum aneurysm diameter, aneurysm sac thrombosis, and other adverse events.

RESULTS

There were 14 patients with Brucella-related aorto-iliac artery aneurysms who underwent sac filling with FS and gentamicin after EVAR. Perioperative death due to myocardial infarction in 1 patient resulted in a postoperative all-cause mortality rate of 7.1% (1/14). All patients received anti-Brucella drugs for a median of 6.0 (range: 3-12) months postoperatively. During a median follow-up period of 15.0 (range 0.5-36) months, the absolute and sagittal maximum diameters of the aorto-iliac aneurysm sac were significantly smaller than preoperation (from 46.3 ± 17.0 to 27.2 ± 16.3 mm, P<.001, and from 39.2 ± 13.1 to 24.0 ± 13.8 mm, P<.001). Two of these patients had a postoperative disappearance of the pseudoaneurysm. One patient was reintervened for bilateral femoral artery bypass surgery. Except for sac filling with gentamicin, all patients received anti-brucella medication for a median of 6.0 (range: 3-12) months. There were no allergic reactions, nephrotoxicity, endoleak, recurrence, VGI, aorta-related or infection-related deaths during the perioperative period and follow-up.

CONCLUSIONS

Sac filling with FS and gentamicin adjunctive to EVAR, with targeted drug delivery to the sites of Brucella-related aorto-iliac artery aneurysm infection lesions, may be an effective solution to control pseudoaneurysm infection and rupture.

CLINICAL IMPACT

Previous Brucella-associated aorto-iliac artery aneurysms have been limited to case reports. This study significantly increased the number of Brucella-associated aorto-iliac aneurysms by 19.7% (14/71) and extended the follow-up to 3 years. In this retrospective study of 14 patients with Brucella-associated aorto-iliac aneurysms treated endovascularly with fibrin sealant and gentamicin for sac filling and targeted administration to infection-related aneurysms, there were no aneurysm-related deaths or infection-related complications and may be an effective solution for controlling aneurysm infection and rupture. And, this approach is an attractive treatment for moving away from long-term dependence on antibiotics but still needs further evaluation.

Antibacterial and Biocompatible Polyethylene Composites with Hybrid Clay Nanofillers

Low-density polyethylene is one of the basic polymers used in medicine for a variety of purposes; so, the relevant improvements in functional properties are discussed here, making it safer to use as devices or implants during surgery or injury. The objective of the laboratory-prepared material was to study the antimicrobial and biocompatible properties of low-density polyethylene composites with 3 wt. % hybrid nanoclay filler. We found that the antimicrobial activity was mainly related to the filler, i.e., the hybrid type, where inorganic clay minerals, vermiculite or montmorillonite, were intercalated with organic chlorhexidine diacetate and subsequently decorated with Ca-deficient hydroxyapatite. After fusion of the hybrid nanofiller with polyethylene, intense exfoliation of the clay layers occurred. This phenomenon was confirmed by the analysis of the X-ray diffraction patterns of the composite, where the original basal peak of the clays decreased or completely disappeared, and the optimal distribution of the filler was observed using the transmission mode of light microscopy. Functional property testing showed that the composites have good antibacterial activity against Staphylococcus aureus, and the biocompatibility prediction demonstrated the formation of Ca- and P-containing particles through an in vitro experiment, thus applicable for medical use.

Do Triclosan Sutures Modify the Microbial Diversity of Surgical Site Infections? A Systematic Review and Meta-Analysis

Randomised controlled clinical trials (RCTs) report a lower incidence rate of surgical site infections (SSIs) with triclosan sutures (TSs) compared with non-triclosan sutures (NTSs). Do triclosan sutures modify the microbial diversity of culture-confirmed SSIs (ccSSIs)? If so, this would support the association between TS antimicrobial activity and the SSI incidence rate. This prospective systematic literature review (PROSPERO CRD42019125099) was conducted according to PRISMA. RCTs that compared the incidence of SSIs with TSs and NTSs and reported microbial counts from SSI cultures per suture group were eligible. The microbial species were grouped by genus, and the association between genera and sutures was tested. The pooled relative risk (RR) of ccSSIs was also calculated. Twelve RCTs were eligible. No publication bias was identified. The microorganism count was 180 in 124 SSIs with TSs versus 246 in 199 SSIs with NTSs. No significant difference in microbial diversity was found, but statistical power was low for test results to support or challenge the association between the antimicrobial activity of TSs and the reduced rate of SSIs. The RR of the ccSSIs was significant and consistent with comprehensive meta-analyses. The certainty of the pooled RR was moderate.

How Long Do Implanted Triclosan Sutures Inhibit Staphylococcus aureus in Surgical Conditions? A Pharmacological Model

(1) Background: Sutures with triclosan (TS) are used to reduce the risk of surgical site infections (SSI), but most clinical trials are inconclusive. The traceability of SSI risk to antimicrobial activity in operated tissues is needed. (2) Objectives: This study aimed to predict triclosan antistaphylococcal activity in operated tissues. (3) Methods: Three TS were exposed to static water for 30 days, and triclosan release was recorded. Polyglactin TS explanted from sheep seven days after cardiac surgery according to 3Rs provided ex vivo acceleration benchmarks. TS immersion up to 7 days in ethanol-water cosolvency and stirring simulated tissue implantation. Controls were 30-day immersion in static water. The release rate over time was measured and fitted to a predictive function. Antistaphylococcal activity and duration were measured by time-kill analysis with pre-immersed polyglactin TS. (4) Fifteen to 60-fold accelerated in vitro conditions reproduced the benchmarks. The rate prediction with double-exponential decay was validated. The antistaphylococcal activity was bactericidal, with TS pre-immersed for less than 12 h before then S. aureus began to grow. The residual triclosan level was more than 95% and played no detectable role. (5) Conclusions: Polyglactin, poliglecaprone, and polydioxanone TS share similar triclosan release functions with parametric differences. Polyglactin TS is antistaphylococcal in surgical conditions for 4 to 12 h.

Pre-clinical In Vitro Models of Vascular Graft Coating in the Prevention of Vascular Graft Infection: A Systematic Review

OBJECTIVE

Vascular graft infection (VGI) is a feared complication. Prevention is of the utmost importance and vascular graft coatings (VGCs) could offer a potential to do this, with in vitro research a first crucial step. The aim of this study was to summarise key features of in vitro models investigating coating strategies to prevent VGI in order to provide guidance for the setup of future translational research.

DATA SOURCES

A comprehensive search was performed in MEDLINE, Embase, and Web of Science.

METHODS

A systematic review was conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-analyses guidelines. For each database, a specific search strategy was developed. Quality was assessed with the Toxicological data Reliability Assessment Tool (ToxRTool). In vitro models using a VGC and inoculation of the graft with a pathogen were included. The type of graft, coating, and pathogen were summarised. The outcome assessment in each study was evaluated.

RESULTS

In total, 4 667 studies were identified, of which 45 papers met the inclusion criteria. The majority used polyester grafts (68.2%). Thirty-one studies (68.9%) included antibiotics, and nine studies (20%) used a commercial silver graft in their protocol. New antibacterial strategies (e.g., proteolytic enzymes) were investigated. A variety of testing methods was found and focused mainly on bacterial adherence, coating adherence and dilution, biofilm formation, and cytotoxicity. Ninety-three per cent of the studies (n = 41) were considered unreliable.

CONCLUSION

Polyester is the preferred type of graft to coat on. The majority of coating studies are based on antibiotics; however, new coating strategies (e.g., antibiofilm coating) are coming. Many in vitro setups are available. In vitro studies have great potential, they can limit the use, but cannot replace in vivo studies completely. This paper can be used as a guidance document for future in vitro research.

Freeze-Dried Softisan® 649-Based Lipid Nanoparticles for Enhanced Skin Delivery of Cyclosporine A

Inflammatory skin diseases, including psoriasis and atopic dermatitis, affect around one quarter to one third of the world population. Systemic cyclosporine A, an immunosuppressant agent, is included in the current therapeutic armamentarium of these diseases. Despite being highly effective, it is associated with several side effects, and its topical administration is limited by its high molecular weight and poor water solubility. To overcome these limitations, cyclosporine A was incorporated into solid lipid nanoparticles obtained from Softisan^® 649, a commonly used cosmetic ingredient, aiming to develop a vehicle for application to the skin. The nanoparticles presented sizes of around 200 nm, low polydispersity, negative surface charge, and stability when stored for 8 weeks at room temperature or 4 °C. An effective incorporation of 88% of cyclosporine A within the nanoparticles was observed, without affecting its morphology. After the freeze-drying process, the Softisan^® 649-based nanoparticles formed an oleogel. Skin permeation studies using pig ear as a model revealed low permeation of the applied cyclosporine A in the freeze-dried form of the nanoparticles in relation to free drug and the freshly prepared nanoparticles. About 1.0 mg of cyclosporine A was delivered to the skin with reduced transdermal permeation. These results confirm local delivery of cyclosporine A, indicating its promising topical administration.

Mechanism of Action of Surface Immobilized Antimicrobial Peptides Against Pseudomonas aeruginosa

Bacterial colonization and biofilm development on medical devices can lead to infection. Antimicrobial peptide-coated surfaces may prevent such infections. Melimine and Mel4 are chimeric cationic peptides showing broad-spectrum antimicrobial activity once attached to biomaterials and are highly biocompatible in animal models and have been tested in Phase I and II/III human clinical trials. These peptides were covalently attached to glass using an azidobenzoic acid linker. Peptide attachment was confirmed using X-ray photoelectron spectroscopy and amino acid analysis. Mel4 when bound to glass was able to adopt a more ordered structure in the presence of bacterial membrane mimetic lipids. The ability of surface bound peptides to neutralize endotoxin was measured along with their interactions with the bacterial cytoplasmic membrane which were analyzed using DiSC(3)-5 and Sytox green, Syto-9, and PI dyes with fluorescence microscopy. Leakage of ATP and nucleic acids from cells were determined by analyzing the surrounding fluid. Attachment of the peptides resulted in increases in the percentage of nitrogen by 3.0% and 2.4%, and amino acid concentrations to 0.237 nmole and 0.298 nmole per coverslip on melimine and Mel4 coated surfaces, respectively. The immobilized peptides bound lipopolysaccharide and disrupted the cytoplasmic membrane potential of Pseudomonas aeruginosa within 15 min. Membrane depolarization was associated with a reduction in bacterial viability by 82% and 63% for coatings melimine and Mel4, respectively (p < 0.001). Disruption of membrane potential was followed by leakage of ATP from melimine (1.5 ± 0.4 nM) or Mel4 (1.3 ± 0.2 nM) coated surfaces compared to uncoated glass after 2 h (p < 0.001). Sytox green influx started after 3 h incubation with either peptide. Melimine coatings yielded 59% and Mel4 gave 36% PI stained cells after 4 h. Release of the larger molecules (DNA/RNA) commenced after 4 h for melimine (1.8 ± 0.9 times more than control; p = 0.008) and after 6 h with Mel4 (2.1 ± 0.2 times more than control; p < 0.001). The mechanism of action of surface bound melimine and Mel4 was similar to that of the peptides in solution, however, their immobilization resulted in much slower (approximately 30 times) kinetics.

[Local antibiotic therapy]

The treatment of superficial wound infections with local antibiotics is considered to be problematic as it is accompanied by an increased risk of resistance development and ineffectiveness in deeper regions. On the contrary, the local application of antibiotics is useful in arthroplasty and necessary if implants are utilized. The reason for this is the prevention of a rapid biofilm formation on foreign implants and a resulting infection may remain undiscovered until it becomes chronic. Apart from exogenous material, necrotic tissue (e. g. bone sequestra) provides suitable retreat areas for pathogens in the body. Because of the characteristics of bone and joint infections and an exceptional infection recurrence rate, a combined approach is required. Systemic antibiotic prophylaxis is able to reduce the number of pathogens acquired by perioperative contamination or hematogenic spread from another focus of infection; however, systemically applied antibiotics often fail to form an effective colonization barrier around the implant because their ability to penetrate the bone is relatively low. On the other hand, the high concentration of locally released antibiotics leads to an effective protection of the implant from bacteria in situ. Thus, for the treatment of implant-associated infections, systemic and local application of anti-infective agents is a reliable adjuvant measure that improves the therapeutic success. Polymethylmethacrylate (PMMA) bone cement is the most commonly used local drug carrier. Based on clinical and microbiological results, microbiologists and infectious disease experts together with the surgeon and pharmacist determine which anti-infective agents are indicated for systemic and local, PMMA cement-related application. Because there is no evident concept for the local application, unlike the recommendation for systemic use of anti-infective agents, this review article describes which aspects should be taken into account.

Design and evaluation of antibiotic releasing self- assembled scaffolds at room temperature using biodegradable polymer particles

Biodegradable polymer-based drug-eluting implants offer many advantages such as predictable drug release kinetics, safety, and acceptable drug loading under ambient conditions. Herein, we describe fabrication and evaluation of antibiotic loaded scaffolds for localized delivery and tissue engineering applications. PDLLA particles entrapping gentamycin were formulated using solvent evaporation method and used for scaffold fabrication. Optimization of formulation parameters such as pH of the internal aqueous phase and combination of excipients like glycerol, polyvinyl alcohol (PVA) resulted in high entrapment efficiencies up to 96% of gentamicin in particles with drug load of 16-18μg/mg of polymer particles. These microparticles were fused in presence of methanol at ambient temperatures to form scaffolds of different geometry having reasonable mechanical strength. Porosity of these scaffolds was found to be more than 80%. Antibiotic released from the scaffolds was found to be bioactive as tested against Staphylococcus aureus and the release pattern was biphasic over a period of one week. The scaffolds were found to be non-toxic to murine fibroblasts cultures in vitro as well as to mice upon subcutaneous implantation. This method provides a novel and easy way of fabricating antibiotic loaded polymer scaffolds for varieties of applications.

Histological response of soda-lime glass-ceramic bactericidal rods implanted in the jaws of beagle dogs

Bacterial and fungal infections remain a major clinical challenge. Implant infections very often require complicated revision procedures that are troublesome to patients and costly to the healthcare system. Innovative approaches to tackle infections are urgently needed. We investigated the histological response of novel free P₂O₅ glass-ceramic rods implanted in the jaws of beagle dogs. Due to the particular percolated morphology of this glass-ceramic, the dissolution of the rods in the animal body environment and the immature bone formation during the fourth months of implantation maintained the integrity of the glass-ceramic rod. No clinical signs of inflammation took place in any of the beagle dogs during the four months of implantation. This new glass-ceramic biomaterial with inherent bactericidal and fungicidal properties can be considered as an appealing candidate for bone tissue engineering.

Cefazolin Irreversibly Inhibits Proliferation and Migration of Human Mesenchymal Stromal Cells

Drugs may have a significant effect on postoperative bone healing by reducing the function of human mesenchymal stromal cells (hMSC) or mature osteoblasts. Although cefazolin is one of the most commonly used antibiotic drugs in arthroplasty to prevent infection worldwide, there is a lack of information regarding how cefazolin affects hMSC and therefore may have an effect on early bone healing. We studied the proliferation and migration capacity of primary hMSC during cefazolin treatment at various doses for up to 3 days, as well as the reversibility of the effects during the subsequent 3 days of culture without the drug. We found a time- and dose-dependent reduction of the proliferation rate and the migratory potential. Tests of whether these effects were reversible revealed that doses ≥250 μg/mL or treatments longer than 24 h irreversibly affected the cells. We are the first to show that application of cefazolin irreversibly inhibits the potential of hMSC for migration to the trauma site and local proliferation. Cefazolin should be administered only at the required dosage and time to prevent periprosthetic infection. If long-term administration is required and delayed bone healing is present, cefazolin application must be considered as a cause of delayed bone healing.

Antimicrobial performance of mesoporous titania thin films: role of pore size, hydrophobicity, and antibiotic release

Implant-associated infections are undesirable complications that might arise after implant surgery. If the infection is not prevented, it can lead to tremendous cost, trauma, and even life threatening conditions for the patient. Development of an implant coating loaded with antimicrobial substances would be an effective way to improve the success rate of implants. In this study, the in vitro efficacy of mesoporous titania thin films used as a novel antimicrobial release coating was evaluated. Mesoporous titania thin films with pore diameters of 4, 6, and 7 nm were synthesized using the evaporation-induced self-assembly method. The films were characterized and loaded with antimicrobial agents, including vancomycin, gentamicin, and daptomycin. Staphylococcus aureus and Pseudomonas aeruginosa were used to evaluate their effectiveness toward inhibiting bacterial colonization. Drug loading and delivery were studied using a quartz crystal microbalance with dissipation monitoring, which showed successful loading and release of the antibiotics from the surfaces. Results from counting bacterial colony-forming units showed reduced bacterial adhesion on the drug-loaded films. Interestingly, the presence of the pores alone had a desired effect on bacterial colonization, which can be attributed to the documented nanotopographical effect. In summary, this study provides significant promise for the use of mesoporous titania thin films for reducing implant infections.

Self-assembled capsules of poly-N-glycidyl histidine ether–tannic acid for inhibition of biofilm formation in urinary catheters

A coating made of N-glycidyl-histidine ether–tannic acid complex, a biocompatible polymer, onto a catheter surface inhibits the biofilm formation and helps to control the catheter associated infections caused by biofilm forming MDR pathogens.

Coating with a novel gentamicinpalmitate formulation prevents implant-associated osteomyelitis induced by methicillin-susceptible Staphylococcus aureus in a rat model

PURPOSE

Implant-associated osteomyelitis still represents a demanding challenge due to unfavourable biological conditions, bacterial properties and incremental resistance to antibiotic treatment. Therefore different bactericide or bacteriostatic implant coatings have been developed recently to control local intramedullary infections. Controlled local release of gentamicin base from a highly lipophilic gentamicin palmitate compound achieves extended intramedullary retention times and thus may improve its bactericide effect.

METHODS

Forty male Sprague-Dawley rats were divided into two groups receiving an intramedullary femoral injection of 10(2) colony-forming units (CFU) of a common methicillin susceptible Staphylococcus aureus strain (MSSA Rosenbach) and either an uncoated femur nail (Group I) or a nail coated with gentamicin palmitate (Group II). Animals were observed for 28 and 42 days. Serum haptoglobin and relative weight gain were assessed as well as rollover cultures of explanted femur nails and histological scores of periprosthetic infection in dissected femurs.

RESULTS

Implants coated with gentamicin palmitate significantly reduced periprosthetic bacterial growth as well as signs of systemic inflammation compared with uncoated implants.

CONCLUSIONS

Gentamicin palmitate appears to be a viable coating for the prevention of implant-associated infections. These findings will have to be confirmed in larger animal models as well as in clinical trials.

Calcium and zinc containing bactericidal glass coatings for biomedical metallic substrates

The present work presents new bactericidal coatings, based on two families of non-toxic, antimicrobial glasses belonging to B₂O₃–SiO₂–Na₂O–ZnO and SiO₂–Na₂O–Al₂O₃–CaO–B₂O₃ systems. Free of cracking, single layer direct coatings on different biomedical metallic substrates (titanium alloy, Nb, Ta, and stainless steel) have been developed. Thermal expansion mismatch was adjusted by changing glass composition of the glass type, as well as the firing atmosphere (air or Ar) according to the biomedical metallic substrates. Formation of bubbles in some of the glassy coatings has been rationalized considering the reactions that take place at the different metal/coating interfaces. All the obtained coatings were proven to be strongly antibacterial versusEscherichia coli (>4 log).

Novel high efficient coatings for anti-microbial surgical sutures using chlorhexidine in fatty acid slow-release carrier systems

Sutures can cause challenging surgical site infections, due to capillary effects resulting in bacteria permeating wounds. Anti-microbial sutures may avoid these complications by inhibiting bacterial pathogens. Recently, first triclosan-resistances were reported and therefore alternative substances are becoming clinically relevant. As triclosan alternative chlorhexidine, the “gold standard” in oral antiseptics was used. The aim of the study was to optimize novel slow release chlorhexidine coatings based on fatty acids in surgical sutures, to reach a high anti-microbial efficacy and simultaneously high biocompatibility. Sutures were coated with chlorhexidine laurate and chlorhexidine palmitate solutions leading to 11, 22 or 33 µg/cm drug concentration per length. Drug release profiles were determined in aqueous elutions. Antibacterial efficacy against Staphylococcus aureus was assessed in agar diffusion tests. Biocompatibility was evaluated via established cytotoxicity assay (WST-1). A commercially triclosan-containing suture (Vicryl Plus), was used as anti-microbial reference. All coated sutures fulfilled European Pharmacopoeia required tensile strength and proved continuous slow drug release over 96 hours without complete wash out of the coated drug. High anti-microbial efficacy for up to 5 days was observed. Regarding biocompatibility, sutures using 11 µg/cm drug content displayed acceptable cytotoxic levels according to ISO 10993-5. The highest potential for human application were shown by the 11 µg/cm chlorhexidine coated sutures with palmitic acid. These novel coated sutures might be alternatives to already established anti-microbial sutures such as Vicryl Plus in case of triclosan-resistance. Chlorhexidine is already an established oral antiseptic, safety and efficacy should be proven for clinical applications in anti-microbial sutures.

Effect of freezing on the release rate of gentamicin palmitate and gentamicin sulfate from bone tissue

In this study we evaluated gentamicin palmitate salt and gentamicin sulfate salt mixed with bone chips after storage at -80°C. Different concentration rates of gentamicin sulfate and gentamicin palmitate were mixed with human bone chips and stored for 1-6 months at -80°C. Nonstored samples were used as control. The release of the antibiotics from the bone was carried out in phosphate-buffered saline. Antibiotic concentrations in the elutions were determined with microbiological agar diffusion assay using Bacillus subtilis. Susceptibility tests were carried out using Staphylococci strains. The rate of gentamicin base (GB) released from bone was similar for all gentamicin salts and all storage conditions. The elutions released were efficient on reducing S. aureus and S. epidermidis CFU during all storage time. In resume, the capacity of bone grafts to act as gentamicin carriers has been confirmed in this study. GS + GP showed equivalent efficacy against S. aureus and S. epidermidis compared with GS pure. The lower delivery rate of GS + GP, related to its affinity with fat tissue can be an advantage for longer release times, increasing the local protection against infections. Storage at -80°C does not interfere on the gentamicin salts activity used.

Treatment of microbial biofilms in the post-antibiotic era: prophylactic and therapeutic use of antimicrobial peptides and their design by bioinformatics tools

The treatment for biofilm infections is particularly challenging because bacteria in these conditions become refractory to antibiotic drugs. The reduced effectiveness of current therapies spurs research for the identification of novel molecules endowed with antimicrobial activities and new mechanisms of antibiofilm action. Antimicrobial peptides (AMPs) have been receiving increasing attention as potential therapeutic agents, because they represent a novel class of antibiotics with a wide spectrum of activity and a low rate in inducing bacterial resistance. Over the past decades, a large number of naturally occurring AMPs have been identified or predicted from various organisms as effector molecules of the innate immune system playing a crucial role in the first line of defense. Recent studies have shown the ability of some AMPs to act against microbial biofilms, in particular during early phases of biofilm development. Here, we provide a review of the antimicrobial peptides tested on biofilms, highlighting their advantages and disadvantages for prophylactic and therapeutic applications. In addition, we describe the strategies and methods for de novo design of potentially active AMPs and discuss how informatics and computational tools may be exploited to improve antibiofilm effectiveness.

Identification of antimicrobial peptides and immobilization strategy suitable for a covalent surface coating with biocompatible properties

Bacterial accumulation on solid material displays a major source of biomaterial associated infections, cross contamination, and spreading. To overcome these problems, different investigations on surface modifications for the containment of bacterial adhesion have been done. The aim of this research is the development of a rapid and efficient screening procedure to identify and investigate biologically active peptides in an immobilized state in order to produce an antimicrobial surface coating. We figured out that the antimicrobial mode of action is the most important parameter because only peptides with pronounced membrane disruption abilities displayed meaningful activity in an immobilized state. In addition, we highlighted the influence of the coupling reaction chemistry on the activity and amount of the immobilized peptide. Thereupon we developed an optimized antimicrobial surface coating with unrestricted antimicrobial properties by adjusting the immobilization strategy in combination with lowering the necessary peptide amount. Moreover we demonstrated that this antimicrobial surface coating displayed no cytotoxic activity against a eukaryotic cell line and thereby indicates a promising biocompatibility. Furthermore, different antimicrobial peptides obtained either by chemical peptide synthesis or by recombinant DNA technology were used in this study and their activities as well as their potential applications were discussed.

Gentamicin palmitate as a new antibiotic formulation for mixing with bone tissue and local release

During surgery with bone grafting, the impaction of bone tissue creates an avascular area where local circulation is disrupted. If infections arise, they may prevent systemically administered antibiotics from reaching the infected bone. In this study we evaluated gentamicin palmitate (GP) mixed with gentamicin sulfate (GS) as a coating for bone chips (BCh). The efficacy of the coated BCh was measured by gentamicin base release tests using B. subtilis, S. epidermidis and S. aureus. Gentamicin base release was evaluated in phosphate-buffered saline for up to 7 days using B. subtilis bioassay. Antimicrobial efficacy was tested with S. aureus and S. epidermidis. A significant difference on the release of gentamicin base between GS and GS + GP was observed. S. epidermidis are significantly more susceptible to GS + GP and GS than S. aureus. BCh can act as gentamicin carriers and showed efficacy against S. aureus and S. epidermidis.

Sutures coated with antiseptic pomade to prevent bacterial colonization: a randomized clinical trial

OBJECTIVE

The aim of this study was to assess if an antiseptic pomade could reduce the bacterial colonization on multifilament sutures.

STUDY DESIGN

A randomized clinical trial was conducted with 40 volunteer patients of both sexes aged 18-70, randomly separated into experimental (n = 20) and control (n = 20) groups. The experimental group received pomade-coated sutures (iodoform + calendula) and the control group uncoated sutures. Two millimeters of the suture was harvested from each patient from the 1st to the 15th postoperative day. The bacteria that had adhered to them were cultured. The number of colony-forming units per milliliter (CFU/mL) was determined and the groups were compared using the Mann-Whitney statistical test (P < .05).

RESULTS

The experimental group showed a significant reduction in bacterial growth compared with the control group (P = .002).

CONCLUSIONS

In this experimental model, the antiseptic pomade was effective in reducing bacterial colonization on silk braided sutures.

Novel fatty acid gentamicin salts as slow-release drug carrier systems for anti-infective protection of vascular biomaterials

Infections of vascular prostheses are still a major risk in surgery. The current work presents an in vitro evaluation of novel slow release antibiotic coatings based on new gentamicin fatty acid salts for polytetrafluoroethylene grafts. These grafts were coated with gentamicin sodium dodecyl sulfate, gentamicin laurate and gentamicin palmitate. Drug release kinetics, anti-infective characteristics, biocompatibility and haemocompatibility of developed coatings were compared to commercially available gelatin sealed PTFE grafts (SEALPTFE™) and knitted silver coated Dacron(®) grafts (InterGard(®)). Each gentamicin fatty acid coating showed a continuous drug release in the first eight hours followed by a low continuous release. Grafts coated with gentamicin fatty acids reduced bacterial growth even beyond pathologically relevant high concentrations. Cytotoxicity levels depending on drug formulation bringing up gentamicin palmitate as the most promising biocompatible coating. Thrombelastography studies, ELISA assays and an amidolytic substrate assay confirmed haemocompatibility of developed gentamicin fatty acid coatings comparable to commercially available grafts.

Biomembrane interactions reveal the mechanism of action of surface-immobilized host defense IDR-1010 peptide

Dissecting the mechanism of action of surface-tethered antimicrobial and immunomodulatory peptides is critical to the design of optimized anti-infection coatings on biomedical devices. To address this, we compared the biomembrane interactions of host defense peptide IDR-1010cys (1) in free form, (2) as a soluble polymer conjugate, and (3) with one end tethered to a solid support with model bacterial and mammalian lipid membranes. Our results show that IDR-1010cys in all three distinct forms interacted with bacterial and mammalian lipid vesicles, but the extent of the interactions as monitored by the induction of secondary structure varied. The enhanced interaction of surface-tethered peptides is well correlated with their very good antimicrobial activities. Our results demonstrate that there may be a difference in the mechanism of action of surface-tethered versus free IDR-1010cys.

Antibacterial surfaces based on polymer brushes: investigation on the influence of brush properties on antimicrobial peptide immobilization and antimicrobial activity

Primary amine containing copolymer, poly(N,N-dimethylacrylamide-co-N-(3-aminopropyl)methacrylamide hydrochloride) (poly(DMA-co-APMA)), brushes were synthesized on Ti surface by surface-initiated atom transfer radical polymerization (SI-ATRP) in aqueous conditions. A series of poly(DMA-co-APMA) copolymer brushes on titanium (Ti) surface with different molecular weights, thicknesses, compositions, and graft densities were synthesized by changing the SI-ATRP reaction conditions. Cysteine-functionalized cationic antimicrobial peptide Tet213 (KRWWKWWRRC) was conjugated to the copolymers brushes using a maleimide-thiol addition reaction after initial modification of the grafted chains using 3-maleimidopropionic acid N-hydroxysuccinimide ester. The modified surfaces were characterized by X-ray photoelectron spectroscopy (XPS), water contact angle measurements, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, atomic force microscopy (AFM), and ellipsometry analysis. The conjugation of the Tet213 onto brushes strongly depended on graft density of the brushes at different copolymer brush compositions. The peptide density (peptides/nm(2)) on the surface varied with the initial composition of the copolymer brushes. Higher graft density of the brushes generated high peptide density (pepetide/nm(2)) and lower number of peptides/polymer chain and vice versa. The peptide density and graft density of the chains on surface greatly influenced the antimicrobial activity of peptide grafted polymer brushes against Pseudomonas aeruginosa.

Changing the release kinetics of gentamicin from poly(D,L-lactide) implant coatings using only one polymer

Creating orthopedic implants that locally deliver drugs is an appealing approach to induce bone regeneration and prevent or treat infections. In this study, titanium K-wires were coated with poly(D,L-lactide) (PDLLA) solutions with different polymer/solvent/drug ratios to modify the release kinetics of the antibiotic gentamicin. The concentrations of PDLLA ranged from one-fold (100 mg/1.5 mL solvent, 1X) to four-fold (400 mg/1.5 mL solvent, 4X), where the higher concentrations led to the thickening of the drug-loaded coatings and an increase of total coating mass. Coated wires were incubated in PBS buffer at 37 °C for up to 32 weeks, and the elution kinetics were analyzed at several time points. Different release profiles were observed: I) a burst release within the first hours for the coatings made out of lower concentrations of PDLLA with higher amounts of gentamicin and II) a sustained release of up to 14 weeks for the different coatings with higher polymer amounts with lower concentrations of gentamicin. Moreover, the amounts of remaining gentamicin on the wires after elution were dependent on the coating composition. Nearly complete gentamicin was released from the 1X PDLLA coatings and approximately one-third with respect to initial gentamicin remained in the 4X coatings. Based on these results, we garnered a better understanding of the parameters that influenced release kinetics in this simple system and described how to realize different release patterns by using only one polymer. Using this knowledge, tailored coated implants that can improve infection prophylaxis or stimulate bone healing may be designed.

Antimicrobial activity of gentamicin palmitate against high concentrations of Staphylococcus aureus

The reduction of implant related infections plays a pivotal role in orthopaedic surgery as an increasing number of people require implants (up to 200,000 per year in the United States (source: Joint Implant Surgery & Research Foundation 2010)). The aim of the current study is to prevent and thus decrease the number of bacterial infections. Both pre and post operative systemic antibiotic treatment and gentamicin containing bone cements (polymethylmethacrylate, PMMA) are commonly used strategies to overcome infections. In this study, the antimicrobial efficacy of gentamicin sulfate loaded bone cement was compared with titan discs coated with a new form of gentamicin, gentamicin palmitate. Adherence prevention, killing rates and killing kinetics were compared in an in vitro model, using Staphylococcus aureus (S. aureus), which together with Staphylococcus epidermidis (S. epidermidis) represents 60% of bacteria found responsible for hip implant infections (An and Friedman, 1996, J Hosp Infect 33(2):93-108). In our experiments gentamicin, which was applied as gentamicin palmitate on the surface of the implants, showed a high efficacy in eliminating bacteria. In contrast to gentamicin sulfate containing bone cements, gentamicin palmitate is released over a shorter period of time thus not inducing antibiotic resistance. Another benefit for clinical application is that it achieves high local levels of active ingredient which fight early infections and minimize toxic side effects. Furthermore, the short term hydrophobic effect of gentamicin palmitate can successfully impede biofilm formation. Thus, the use of self-adhesive antibiotic fatty acid complexes like gentamicin palmitate represents a new option for the anti-infective coating of cementless titan implants.

Stability of Phosphonic Self Assembled Monolayers (SAMs) on Cobalt Chromium (Co-Cr) Alloy under Oxidative conditions

Cobalt Chromium (Co-Cr) alloys has been widely used in the biomedical arena for cardiovascular, orthopedic and dental applications. Surface modification of the alloy allows us to tailor the interfacial properties to address critical challenges of Co-Cr alloy in medical applications. Self assembled monolayers (SAMs) of Octadecylphosphonic acid (ODPA) have been used to form thin films on the oxide layer of the Co-Cr alloy surface by solution deposition technique. The SAMs formed were investigated for their stability to oxidative conditions of ambient laboratory environment over periods of 1, 3, 7 and 14 days. The samples were then characterized for their stability using X-ray Photoelectron Spectroscopy (XPS), Atomic Force Microscopy (AFM) and Contact Angle Measurements. Detailed high energy XPS elemental scans confirmed the presence of the phosphonic monolayer after oxidative exposure which suggested that the SAMs were firmly attached to the oxide layer of Co-Cr alloy. AFM images gave topographical data of the surface and showed islands of SAMs on Co-Cr alloy surface, before and after SAM formation and also over the duration of the oxidative exposure. Contact angle measurements confirmed the hydrophobicity of the surface over 14 days. Thus the SAMs were found to be stable for the duration of the study. These SAMs could be subsequently tailored by modifying the terminal functional groups and could be used for various potential biomedical applications such as drug delivery, biocompatibility and tissue integration.

Biodegradable tocopherol acetate as a drug carrier to prevent ureteral stent-associated infection

Biomaterial-centred bacterial infections present common and challenging complications with medical implants like ureteral stent which provide substratum for the biofilm formation. Hence the purpose of this study is to make antibacterial stent surface with biodegradable polymer (tocopherol acetate) and anti-infective agents (norfloxacin and metronidazole) using a modified dip-coating procedure. This is done by impregnating the stent pieces in the anti-infective solution (a mixture of norfloxacin-metronidazole and polymer) for uniform surface coating (drug-carrier-coated stents). After coating, agar diffusion test was performed as qualitative test to find out the sensitivity of coated stents against the clinical isolates, Staphylococcus epidermidis and Escherichia coli. Quantitative test was measured by calculating the numbers of adhered bacteria on coated and uncoated stents by incubating the stent pieces in artificial urine. Difference in the number of viable bacteria adhered on the surface of coated and uncoated stents were statistically calculated using chi square test with p < 0.05 considered significant. The stent colonising ability of Staphylococcus epidermidis and Escherichia coli in a controlled environment chamber was determined using two-challenge dose of the isolates by in vitro challenge test. In qualitative test, the zone of inhibition around the coated stents showed sensitivity against the clinical isolates. In quantitative test, the number of adhered bacteria on the surface of coated stents was reduced to a significant level (p < 0.05). The polymer, tocopherol acetate is highly biodegradable in nature. Due to its degrading ability in body tissues, it releases the anti-infective drugs at a constant and sustained rate.

Prevention of early vascular graft infection using regional antibiotic release

BACKGROUND

Infections after prosthetic replacement of the aorta remain a serious and life-threatening complication. The only appropriate treatment is the surgical removal of the infected prosthesis. Accordingly, there is a need for new procedures to prevent the infection of vascular prostheses. This in vitro experiment investigated the effect of the pretreatment of vascular prostheses with antibiotics (daptomycin or baneocin) and the effect of antibiotics combined with fibrin sealant as possible prophylaxis of perioperative graft infection.

METHODS

Untreated prostheses served as controls. Pretreated prostheses of double woven velour vascular grafts were contaminated with Staphylococcus epidermidis, and colony-forming units were counted each day (CFU/mL).

RESULTS

The period of sterility differed significantly as a function of the pretreatment. Uncoated prostheses were immediately non-sterile and exhibited 2.63 ± 0.61 × 10(5) CFU/mL. Baneocin pretreatment resulted in sterility for 1.7 ± 0.6 (95% confidence interval (CI) 1.0-2.4) d before we detected 2.14 ± 0.57 × 10(5) CFU/mL on the prostheses. Pretreatment with daptomycin yielded 2.9 ± 0.4 (CI 2.6-3.2) and fibrin sealant/baneocin compound yielded 3.1 ± 0.3 (CI 2.9-3.3) d of sterility, after which 1.81 ± 0.86 × 10(5) CFU/mL and 1.04 ± 0.77 × 10(5) CFU/mL were recorded. Finally, pretreatment with fibrin sealant/daptomycin led to sterility for 7.1 ± 0.3 (CI 6.9-7.3) d, after which 0.77 ± 0.60 × 10(5) CFU/mL were observed on the prostheses.

CONCLUSIONS

The risk of vascular graft infection is reduced by pretreating the prostheses with antibiotics. The antibiotic/fibrin compound exhibited an effect of delayed antibiotic release. Vascular prostheses should therefore be pretreated with antibiotic solution to reduce bacterial adhesion. This procedure might be an effective prophylaxis for perioperative vascular graft infection and provides suitable protection for the prosthetic material.

Biofilm formation in environmental bacteria is influenced by different macromolecules depending on genus and species

The formation of biofilms by diverse bacteria isolated from contaminated soil and groundwater on model substrata with different surface properties was assessed in a multifactorial screen. Diverse attachment phenotypes were observed as measured by crystal violet dye retention and confocal laser scanning microscopy (CLSM). Bulk measurements of cell hydrophobicity had little predictive ability in determining whether biofilms would develop on hydrophobic or hydrophilic substrata. Therefore selected pairs of bacteria from the genera Rhodococcus, Pseudomonas and Sphingomonas that exhibited different attachment phenotypes were examined in more detail using CLSM and the lipophilic dye, Nile Red. The association of Rhodococcus sp. cell membranes with lipids was shown to influence the attachment properties of these cells, but this approach was not informative for Pseudomonas and Sphingomonas sp. Confocal Raman Microspectroscopy of Rhodococcus biofilms confirmed the importance of lipids in their formation and indicated that in Pseudomonas and Sphingomonas biofilms, nucleic acids and proteins, respectively, were important in identifying the differences in attachment phenotypes of the selected strains. Treatment of biofilms with DNase I confirmed a determining role for nucleic acids as predicted for Pseudomonas. This work demonstrates that the attachment phenotypes of microbes from environmental samples to different substrata varies markedly, a diverse range of macromolecules may be involved and that these differ significantly between genera. A combination of CLSM and Raman spectroscopy distinguished between phenotypes and could be used to identify the key macromolecules involved in cell attachment to surfaces for the specific cases studied.

Treatment of osteomyelitis by liposomal gentamicin-impregnated calcium sulfate

OBJECTIVES

Traditional therapy of staphylococcal osteomyelitis is ineffective in producing complete sterilization of infected bones due to the formation of the Staphylococcus aureus biofilms. The aim of this study was to develop a new drug-delivery system of antibiotics for treatment of chronic experimental osteomyelitis.

METHODS

In the current work, cationic liposomal gentamicin was prepared and impregnated in calcium sulfate (CS), and tested for anti-biofilm activities in vitro and in vivo.

RESULTS AND CONCLUSIONS

The combination of liposomal gentamicin and CS showed initial burst-release of active liposomal gentamicin and had continuous-release (12 days). Liposomal gentamicin released from CS had the same anti-biofilm activity with the liposomal gentamicin prepared freshly. Meanwhile, both agents were more effective relative to free gentamicin at low drug concentration. Therapeutic trials with antibiotics given intravenously revealed that free gentamicin for 14 days was ineffective in sterilizing bone. Treatment with liposomal gentamicin for 14 days resulted in recovery of 33.3% of treated animals, which was the lower slightly than the result treated with implantation of gentamicin-impregnated CS (66.7%). Complete sterilization of bone tissues on cultures (100% cure) was obtained only in the group of liposomal gentamicin-impregnated CS treated for 14 days. The new drug-delivery system was effective in preventing biofilm infection in a contaminated defect, and it could also be used clinically for bacterial infections in the conditions like plaque formation or in arresting biofilm formation in the implanted devices or dead bone of osteomyelitis.