Quantitative Reverse Sample Genome Probing of Microbial Communities and Its Application to Oil Field Production Waters

Transcriptome-wide marker gene expression analysis of stress-responsive sulfate-reducing bacteria

Sulfate-reducing bacteria (SRB) are terminal members of any anaerobic food chain. For example, they critically influence the biogeochemical cycling of carbon, nitrogen, sulfur, and metals (natural environment) as well as the corrosion of civil infrastructure (built environment). The United States alone spends nearly $4 billion to address the biocorrosion challenges of SRB. It is important to analyze the genetic mechanisms of these organisms under environmental stresses. The current study uses complementary methodologies, viz., transcriptome-wide marker gene panel mapping and gene clustering analysis to decipher the stress mechanisms in four SRB. Here, the accessible RNA-sequencing data from the public domains were mined to identify the key transcriptional signatures. Crucial transcriptional candidate genes of Desulfovibrio spp. were accomplished and validated the gene cluster prediction. In addition, the unique transcriptional signatures of Oleidesulfovibrio alaskensis (OA-G20) at graphene and copper interfaces were discussed using in-house RNA-sequencing data. Furthermore, the comparative genomic analysis revealed 12,821 genes with translation, among which 10,178 genes were in homolog families and 2643 genes were in singleton families were observed among the 4 genomes studied. The current study paves a path for developing predictive deep learning tools for interpretable and mechanistic learning analysis of the SRB gene regulation.

Desulfovibrio vulgaris as a model microbe for the study of corrosion under sulfate-reducing conditions

Corrosion of iron-containing metals under sulfate-reducing conditions is an economically important problem. Microbial strains now known as Desulfovibrio vulgaris served as the model microbes in many of the foundational studies that developed existing models for the corrosion of iron-containing metals under sulfate-reducing conditions. Proposed mechanisms for corrosion by D. vulgaris include: (1) H2 consumption to accelerate the oxidation of Fe0 coupled to the reduction of protons to H2; (2) production of sulfide that combines with ferrous iron to form iron sulfide coatings that promote H2 production; (3) moribund cells release hydrogenases that catalyze Fe0 oxidation with the production of H2; (4) direct electron transfer from Fe0 to cells; and (5) flavins serving as an electron shuttle for electron transfer between Fe0 and cells. The demonstrated possibility of conducting transcriptomic and proteomic analysis of cells growing on metal surfaces suggests that similar studies on D. vulgaris corrosion biofilms can aid in identifying proteins that play an important role in corrosion. Tools for making targeted gene deletions in D. vulgaris are available for functional genetic studies. These approaches, coupled with instrumentation for the detection of low concentrations of H2, and proven techniques for evaluating putative electron shuttle function, are expected to make it possible to determine which of the proposed mechanisms for D. vulgaris corrosion are most important.

In depth metagenomic analysis in contrasting oil wells reveals syntrophic bacterial and archaeal associations for oil biodegradation in petroleum reservoirs

Microbial biodegradation of hydrocarbons in petroleum reservoirs has major consequences in the petroleum value and quality. The identification of microorganisms capable of in-situ degradation of hydrocarbons under the reservoir conditions is crucial to understand microbial roles in hydrocarbon transformation and the impact of oil exploration and production on energy resources. The aim of this study was to profile the metagenome of microbial communities in crude oils and associated formation water from two high temperature and relatively saline oil-production wells, where one has been subjected to water flooding (BA-2) and the other one is considered pristine (BA-1). The microbiome was studied in the fluids using shotgun metagenome sequencing. Distinct microbial compositions were revealed when comparing pristine and water flooded oil wells in contrast to the similar community structures observed between the aqueous and oil fluids from the same well (BA-2). The equal proportion of archaea and bacteria together with the greater anaerobic hydrocarbon degradation potential in the BA-1 pristine but degraded reservoir contrasted with the predominance of bacteria over archaea, aerobic pathways and lower frequency of anaerobic degradation genes in the BA-2 water flooded undegraded well. Our results suggest that Syntrophus, Syntrophomonas, candidatus Atribacteria and Synergistia, in association with mainly acetoclastic methanogenic archaea of the genus Methanothrix, were collectively responsible for the oil biodegradation observed in the pristine petroleum well BA-1. Conversely, the microbial composition of the water flooded oil well BA-2 was mainly dominated by the fast-growing and putatively aerobic opportunists Marinobacter and Marinobacterium. This presumable allochthonous community introduced a greater metabolic versatility, although oil biodegradation has not been detected hitherto perhaps due to in-reservoir unfavorable physicochemical conditions. These findings provide a better understanding of the petroleum reservoir microbiomes and their potential roles in biogeochemical processes occurring in environments with different geological and oil recovery histories.

Development of a DNA Macroarray for the Detection and Identification of Fungal Pathogens Causing Decline of Young Grapevines

Young vine decline (YVD) is a complex disease caused by at least 51 different fungi and responsible for important economic losses to the grapevine industry worldwide. YVD fungi are known to occur in planting material. Hence, detection prior to planting is critical to assure longevity of newly established vineyards. A DNA macroarray based on reverse dot-blot hybridization containing 102 oligonucleotides complementary to portions of the β-tubulin region was developed for detection of YVD fungi. Specificity of the array was first evaluated against 138 pure fungal cultures representing 72 different taxa from nine genera, including 37 YVD species. In total, 61 species, including 34 YVD pathogens, were detected and identified by the array. The detection limit of the array was below 0.1 pg of genomic DNA. The array was validated against artificially inoculated canes and soil and commercial planting material, with the latter showing a high incidence of YVD fungi in nursery plants otherwise not detected by traditional plating and culturing. This DNA array proved to be a rapid and specific tool to simultaneously detect and identify most YVD fungi in a single test, which has the potential to be used in commercial diagnostics or by the grapevine nursery industry to determine the health status of the planting material.

A New Application Using a Chromogenic Assay in a Plant Pathogen DNA Macroarray Detection System

A DNA macroarray was previously developed to detect major fungal and oomycete pathogens of solanaceous crops. To provide a convenient alternative for researchers with no access to X-ray film-developing facilities, specific CCD cameras or Chemidoc XRS systems, a chromogenic detection method with sensitivity comparable with chemiluminescent detection, has been developed. A fungal (Stemphylium solani) and an oomycete (Phytophthora capsici) pathogen were used to develop the protocol using digoxigenin (DIG)-labeled targets. The internal transcribed spacer (ITS) region of the nuclear ribosomal DNA (rDNA), including ITS1, 5.8S rDNA, and ITS2, was used as the target gene and polymerase chain reaction amplified as in the previous protocol. Various amounts of species-specific oligonucleotides on the array, quantities of DIG-labeled ITS amplicon, and hybridization temperatures were tested. The optimal conditions for hybridization were 55°C for 2 h using at least 10 pmol of each species-specific oligonucleotide and labeled target at 10 ng/ml of hybridization buffer. Incubation of the hybridized array with anti-DIG conjugated alkaline phosphatase substrates, NBT/BCIP, produced visible target signals between 1 and 3 h compared with 1 h in chemiluminescent detection. Samples from pure cultures, soil, and artificially inoculated plants were also used to compare the detection using chemiluminescent and chromogenic methods. Chromogenic detection was shown to yield similar results compared with chemiluminescent detection in regard to signal specificity, duration of hybridization between the array and targets, and cost, though it takes 1 to 2 h longer for the visualization process, thus providing a convenient alternative for researchers who lack darkroom facilities. To our knowledge, this is the first report of DNA macroarray detection of plant pathogens using a chromogenic method.

Identification of hydrocarbon-degrading bacteria in soil by reverse sample genome probing

Bacteria with limited genomic cross-hybridization were isolated from soil contaminated with C5+, a mixture of hydrocarbons, and identified by partial 16S rRNA sequencing. Filters containing denatured genomic DNAs were used in a reverse sample genome probe (RSGP) procedure for analysis of the effect of an easily degradable compound (toluene) and a highly recalcitrant compound (dicyclopentadiene [DCPD]) on community composition. Hybridization with labeled total-community DNA isolated from soil exposed to toluene indicated enrichment of several Pseudomonas spp., which were subsequently found to be capable of toluene mineralization. Hybridization with labeled total-community DNA isolated from soil exposed to DCPD indicated enrichment of a Pseudomonas sp. or a Sphingomonas sp. These two bacteria appeared capable of producing oxygenated DCPD derivatives in the soil environment, but mineralization could not be shown. These results demonstrate that bacteria, which metabolize degradable or recalcitrant hydrocarbons, can be identified by the RSGP procedure.

Effect of nitrate injection on the microbial community in an oil field as monitored by reverse sample genome probing

The reverse sample genome probe (RSGP) method, developed for monitoring the microbial community in oil fields with a moderate subsurface temperature, has been improved by (i) isolation of a variety of heterotrophic bacteria and inclusion of their genomes on the oil field master filter and (ii) use of phosphorimaging technology for the rapid quantitation of hybridization signals. The new master filter contains the genomes of 30 sulfate-reducing, 1 sulfide-oxidizing, and 16 heterotrophic bacteria. Most have been identified by partial 16S rRNA sequencing. Use of improved RSGP in monitoring the effect of nitrate injection in an oil field indicated that the sulfide-oxidizing, nitrate-reducing isolate CVO (a Campylobacter sp.) becomes the dominant community component immediately after injection. No significant enhancement of other community members, including the sulfate-reducing bacteria, was observed. The elevated level of CVO decayed at most sampling sites within 30 days after nitrate injection was terminated. Chemical analyses indicated a corresponding decrease and subsequent increase in sulfide concentrations. Thus, transient injection of a higher potential electron acceptor into an anaerobic subsurface system can have desirable effects (i.e., reduction of sulfide levels) without a permanent adverse influence on the resident microbial community.

Role of Serratia marcescens ACE2 on diesel degradation and its influence on corrosion

A facultative anaerobic species Serratia marcescens ACE2 isolated from the corrosion products of diesel transporting pipeline in North West, India was identified by 16S rDNA sequence analysis. The role of Serratia marcesens ACE2 on biodegradation of diesel and its influence on the corrosion of API 5LX steel has been elucidated. The degrading strain ACE2 is involved in the process of corrosion of steel API 5LX and also utilizes the diesel as an organic source. The quantitative biodegradation efficiency (BE) of diesel was 58%, calculated by gas-chromatography-mass spectrum analysis. On the basis of gas-chromatography-mass spectrum (GC-MS), Fourier Transform infrared spectroscopy (FTIR) and X-ray diffractometer (XRD), the involvement of Serratia marcescens on degradation and corrosion has been investigated. This basic study will be useful for the development of new approaches for detection, monitoring and control of microbial corrosion.

Hybridization of genomic DNA to microarrays: a challenge for the analysis of environmental samples

The use of DNA microarrays for detection and identification of bacteria and genes of interest from various environments (e.g. soil, sediment, water column...) is a major challenge for microbiologists working on functional diversity. So far, most of the genomic methods that have been described rely on the use of taxonomic markers (such as 16S rRNA) that can be easily amplified by PCR prior to hybridization on microarrays. However, taxonomical markers are not always informative on the functions present in these bacteria. Moreover, genes for which sequence database is limited or that lack any conserved regions will be difficult to amplify and thus to detect in unknown samples. Furthermore, PCR amplification often introduces biases that lead to inaccurate analysis of microbial communities. An alternative solution to overcome these strong limitations is to use genomic DNA (gDNA) as target for hybridisation, without prior PCR amplification. Though hybridization of gDNA is already used for comparative genome hybridization or sequencing by hybridization, yet to the high cost of tiling strategies and important data filtering, its adaptation for use in environmental research poses great challenges in terms of specificity, sensitivity and reproducibility of hybridization. Considering the very faint number of publications that have described hybridization of gDNA to microarrays for environmental applications, we confront in this review the different approaches that have been developed so far, and propose alternative strategies that may contribute to improve the development of microarrays for studying the microbial genetic structure and composition of samples of high environmental and ecological value.

Quantitative assessment of phytopathogenic fungi in various substrates using a DNA macroarray

Detection, identification and quantification of plant pathogens are the cornerstones of preventive plant disease management. To detect multiple pathogens in a single assay, DNA array technology currently is the most suitable technique. However, for sensitive detection, polymerase chain reaction (PCR) amplification before array hybridization is required. To evaluate whether DNA array technology can be used to simultaneously detect and quantify multiple pathogens, a DNA macroarray was designed and optimized for accurate quantification over at least three orders of magnitude of the economically important vascular wilt pathogens Verticillium albo-atrum and Verticillium dahliae. A strong correlation was observed between hybridization signals and pathogen concentrations for standard DNA added to DNA from different origins and for infested samples. While accounting for specific criteria like amount of immobilized detector oligonucleotide and controls for PCR kinetics, accurate quantification of pathogens was achieved in concentration ranges typically encountered in horticultural practice. Subsequently, quantitative assessment of other tomato pathogens (Fusarium oxysporum, Fusarium solani, Pythium ultimum and Rhizoctonia solani) in environmental samples was performed using DNA array technology and correlated to measurements obtained using real-time PCR. As both methods of quantification showed a very high degree of correlation, the reliability and robustness of the DNA array technology is shown.

Development of a DNA Macroarray for Detection and Monitoring of Economically Important Apple Diseases

Short DNA gene sequences (oligonucleotides) from the ribosomal spacer regions of bacterial and fungal pathogens were used to identify and monitor economically important apple diseases. The oligonucleotides or probes were attached to a nylon membrane by an amine modified linker arm and arranged in a precise pattern to form an array for detecting five pathogens corresponding to five apple diseases. Initially the specificity of the probes was determined by hybridizing pure cultures of the pathogens to the probes. The DNA array correctly identified Botrytis cinerea, Penicillium expansum, Podosphaera leucotricha, Venturia inaequalis, and Erwinia amylovora and eliminated closely related species. When the array was used to monitor V. inaequalis ascospores collected from spore traps located in orchards, it confirmed the presence of ascospores as predicted by the disease forecasting model. Preliminary tests to quantify P. leucotricha populations using grayscale values was effective to 20 conidia per leaf disk. The DNA array is a promising new detection system for accurate identification of several pathogens in a single test with the potential for being a new tool for epidemiological studies.

Simultaneous enumeration of different bacteria using reverse sample genome probing technique

Quantitative reverse sample genome probing (RSGP) with lambdaDNA as an internal standard was used to enumerate the total numbers of Rhizobium sp. CCRC 13560, Rhizobium meliloti CCRC 13516 and Bradyrhizobium sp. CCRC 13585. K(lambda)/Kx ratios varied between the three species but also in response to the amounts of lambdaDNA or genomic DNA used in the labeling mixture or fixed upon the membrane. Comparative enumerations of pure cultures revealed higher counts using genomic probing as compared with growth-based colony forming units (CFU; 3.4+/-1.7-fold higher for R. meliloti, 6.4+/-7.8-fold higher for Rhizobium sp. and 0.34+/-0.17-fold higher for Bradyrhizobium sp.). In mixed cultures, the estimated cell numbers using genomic probing were 126+/-172-, 85+/-83- and 4.0+/-3.4-fold higher (same respective order) than the growth-based assay. By replacing the klambda/kx ratio with k'lambda/k'x (slope from signal intensity of differently diluted lambdaDNA/slope from signal intensity of differently diluted target DNAxf(x)/flambda), significant improvement in the accuracy of the estimation was achieved. The calculated cell numbers via the genomic probe technique were 0.99+/-0.13-, 1.25+/-0.23- and 0.18+/-0.11-fold higher than the respective CFUs in pure cultures of R. meliloti, Rhizobium sp. and Bradyrhizobium sp. In samples containing mixed populations, the estimated numbers from genomic probing were 1.25+/-0.51-, 45.9+/-14.8- and 0.27+/-0.07-fold higher than the CFU-derived cell count (same respective order).

Development and evaluation of microarray-based whole-genome hybridization for detection of microorganisms within the context of environmental applications

The detection and identification of microorganisms in natural communities is a great challenge to biologists. Microarray-based genomic technology provides a promising high-throughput alternative to traditional microbial characterization. A novel prototype microarray containing whole genomic DNA, termed community genome array (CGA), was constructed and evaluated. Microarray hybridizations at 55 degrees C using 50% formamide permitted the examined bacteria to be distinguished at the species level, while strain-level differentiation was obtained at hybridization temperatures of 65 or 75 degrees C. The detection limit was estimated to be approximately 0.2 ng with genomic DNA from a single pure culture using a reduced hybridization volume (3 microL). Using mixtures of known amounts of DNA or a known number of cells from 14 or 16 different species, respectively, about 5 ng of genomic DNA or 2.5 x 10(5) cells were detected under the hybridization conditions used. In addition, strong linear relationships were observed between hybridization signal intensity and target DNA concentrations for pure cultures, a mixture of DNA templates, and a population of mixed cells (r2 = 0.95-0.98, P < 0.01). Finally, the prototype CGA revealed differences in microbial community composition in soil, river, and marine sediments. The results suggest that CGA hybridization has potential as a specific, sensitive, and quantitative tool for detection and identification of microorganisms in environmental samples.

Methods of studying soil microbial diversity

Soil microorganisms, such as bacteria and fungi, play central roles in soil fertility and promoting plant health. This review examines and compares the various methods used to study microbial diversity in soil.

Use of community genome arrays (CGAs) to assess the effects of Acacia angustissima on rumen ecology

This research developed a community genome array (CGA) to assess the effects of Acacia angustissima on rumen microbiology. A. angustissima produces non-protein amino acids as well as tannins, which may be toxic to animals, and CGA was used to assess the effects of this plant on the ecology of the rumen. CGAs were developed using a 7·5 cm×2·5 cm nylon membrane format that included up to 96 bacterial genomes. It was possible to separately hybridize large numbers of membranes at once using this mini-membrane format. Pair-wise cross-hybridization experiments were conducted to determine the degree of cross-hybridization between strains; cross-hybridization occurred between strains of the same species, but little cross-reactivity was observed among different species. CGAs were successfully used to survey the microbial communities of animals consuming an A. angustissima containing diet but quantification was not precise. To properly quantify and validate the CGA, Fibrobacter and Ruminococcus populations were independently assessed using 16S rDNA probes to extracted rRNA. The CGA detected an increase in these populations as acacia increased in the diet, which was confirmed by rRNA analysis. There was a great deal of variation among strains of the same species in how they responded to A. angustissima. However, in general Selenomonas strains tended to be resistant to the tannins in the acacia while Butyrivibrio fibrisolvens was sensitive. On the other hand some species, like streptococci, varied. Streptococcus bovis-like strains were sensitive to an increase in acacia in the diet while Streptococcus gallolyticus-like strains were resistant. Strep. gallolyticus has independently been shown to be resistant to tannins. It is concluded that there is significant variation in tannin resistance between strains of the same species. This implies that there are specific molecular mechanisms at play that are independent of the phylogenetic position of the organism.

Recent advances in petroleum microbiology

Recent advances in molecular biology have extended our understanding of the metabolic processes related to microbial transformation of petroleum hydrocarbons. The physiological responses of microorganisms to the presence of hydrocarbons, including cell surface alterations and adaptive mechanisms for uptake and efflux of these substrates, have been characterized. New molecular techniques have enhanced our ability to investigate the dynamics of microbial communities in petroleum-impacted ecosystems. By establishing conditions which maximize rates and extents of microbial growth, hydrocarbon access, and transformation, highly accelerated and bioreactor-based petroleum waste degradation processes have been implemented. Biofilters capable of removing and biodegrading volatile petroleum contaminants in air streams with short substrate-microbe contact times (<60 s) are being used effectively. Microbes are being injected into partially spent petroleum reservoirs to enhance oil recovery. However, these microbial processes have not exhibited consistent and effective performance, primarily because of our inability to control conditions in the subsurface environment. Microbes may be exploited to break stable oilfield emulsions to produce pipeline quality oil. There is interest in replacing physical oil desulfurization processes with biodesulfurization methods through promotion of selective sulfur removal without degradation of associated carbon moieties. However, since microbes require an environment containing some water, a two-phase oil-water system must be established to optimize contact between the microbes and the hydrocarbon, and such an emulsion is not easily created with viscous crude oil. This challenge may be circumvented by application of the technology to more refined gasoline and diesel substrates, where aqueous-hydrocarbon emulsions are more easily generated. Molecular approaches are being used to broaden the substrate specificity and increase the rates and extents of desulfurization. Bacterial processes are being commercialized for removal of H(2)S and sulfoxides from petrochemical waste streams. Microbes also have potential for use in removal of nitrogen from crude oil leading to reduced nitric oxide emissions provided that technical problems similar to those experienced in biodesulfurization can be solved. Enzymes are being exploited to produce added-value products from petroleum substrates, and bacterial biosensors are being used to analyze petroleum-contaminated environments.

Molecular ecology of anaerobic reactor systems

Anaerobic reactor systems are essential for the treatment of solid and liquid wastes and constitute a core facility in many waste treatment plants. Although much is known about the basic metabolism in different types of anaerobic reactors, little is known about the microbes responsible for these processes. Only a few percent of Bacteria and Archaea have so far been isolated, and almost nothing is known about the dynamics and interactions between these and other microorganisms. This lack of knowledge is most clearly exemplified by the sometimes unpredictable and unexplainable failures and malfunctions of anaerobic digesters occasionally experienced, leading to sub-optimal methane production and wastewater treatment. Using a variety of molecular techniques, we are able to determine which microorganisms are active, where they are active, and when they are active, but we still need to determine why and what they are doing. As genetic manipulations of anaerobes have been shown in only a few species permitting in-situ gene expression studies, the only way to elucidate the function of different microbes is to correlate the metabolic capabilities of isolated microbes in pure culture to the abundance of each microbe in anaerobic reactor systems by rRNA probing. This chapter focuses on various molecular techniques employed and problems encountered when elucidating the microbial ecology of anaerobic reactor systems. Methods such as quantitative dot blot/fluorescence in-situ probing using various specific nucleic acid probes are discussed and exemplified by studies of anaerobic granular sludge, biofilm and digester systems.

Analysis of environmental microbial communities by reverse sample genome probing

Development of fast and accurate methods for monitoring environmental microbial diversity is one of the great challenges in microbiology today. Oligonucleotide probes based on 16S rRNA sequences are widely used to identify bacteria in the environment. However, the successful development of a chip of immobilized 16S rRNA probes for identification of large numbers of species in a single hybridization step has not yet been reported. In reverse sample genome probing (RSGP), labelled total community DNA is hybridized to arrays in which genomes of cultured microorganisms are spotted on a solid support in denatured form. This method has provided useful information on changes in composition of the cultured component of microbial communities in oil fields, the soil rhizhosphere, hydrocarbon-contaminated soils and acid mine drainage sites. Applications and limitations of the method, as well as the prospects of extending RSGP to cover also the as yet uncultured component of microbial communities, are evaluated.

Molecular diagnostics for fungal plant pathogens

Accurate identification of fungal phytopathogens is essential for virtually all aspects of plant pathology, from fundamental research on the biology of pathogens to the control of the diseases they cause. Although molecular methods, such as polymerase chain reaction (PCR), are routinely used in the diagnosis of human diseases, they are not yet widely used to detect and identify plant pathogens. Here we review some of the diagnostic tools currently used for fungal plant pathogens and describe some novel applications. Technological advances in PCR-based methods, such as real-time PCR, allow fast, accurate detection and quantification of plant pathogens and are now being applied to practical problems. Molecular methods have been used to detect several pathogens simultaneously in wheat, and to study the development of fungicide resistance in wheat pathogens. Information resulting from such work could be used to improve disease control by allowing more rational decisions to be made about the choice and use of fungicides and resistant cultivars. Molecular methods have also been applied to the study of variation in plant pathogen populations, for example detection of different mating types or virulence types. PCR-based methods can provide new tools to monitor the exposure of a crop to pathogen inoculum that are more reliable and faster than conventional methods. This information can be used to improve disease control decision making. The development and application of molecular diagnostic methods in the future is discussed and we expect that new developments will increase the adoption of these new technologies for the diagnosis and study of plant disease.

Challenges in applying microarrays to environmental studies

Although DNA microarray technology has been used successfully to analyze global gene expression in pure cultures, it has not been rigorously tested and evaluated within the context of complex environmental samples. Adapting microarray hybridization for use in environmental studies faces several challenges associated with specificity, sensitivity and quantitation.

Quantitative detection of microbial genes by using DNA microarrays

To quantify target genes in biological samples using DNA microarrays, we employed reference DNA to normalize variations in spot size and hybridization. This method was tested using nitrate reductase (nirS), naphthalene dioxygenase (nahA), and Escherichia coli O157 O-antigen biosynthesis genes as model genes and lambda DNA as the reference DNA. We observed a good linearity between the log signal ratio and log DNA concentration ratio at DNA concentrations above the method's detection limit, which was approximately 10 pg. This approach for designing quantitative microarrays and the inferred equation from this study provide a simple and convenient way to estimate the target gene concentration from the hybridization signal ratio.

Phylogeny of culturable estuarine bacteria catabolizing riverine organic matter in the northern Baltic Sea

The objective of our study was to isolate and determine the phylogenetic affiliation of culturable estuarine bacteria capable of catabolizing riverine dissolved organic matter (RDOM) under laboratory conditions. Additions of RDOM consistently promoted the growth of estuarine bacteria in carbon-limited dilution cultures, with seasonal variation in growth rates and yields. At least 42 different taxa were culturable on solid agar media and, according to quantitative DNA-DNA hybridizations, constituted 32 to 89% of the total bacterial number in the enriched treatments. Five species in the Cytophaga-Flexibacter-Bacteroides group and one in the gamma-proteobacteria phylogenetic group (Marinomonas sp.) were numerically dominant during the stationary phase of the RDOM-enriched dilution cultures but not in the control cultures. Four of the isolates in Cytophaga-Flexibacter-Bacteroides group were putatively affiliated with the genus FLAVOBACTERIUM: All dominating isolates were determined to be new species based on comparison to the current databases. The same group of species dominated independently of the season investigated, suggesting a low diversity of bacteria catabolizing RDOM in the estuary. It also suggested a broad tolerance of the dominating species to seasonal variation in hydrography, chemistry, and competition with other species. Taken together, our results suggest that a limited group of bacteria, mainly in the Flavobacterium genus, played an important role in introducing new energy and carbon to the marine system in the northern Baltic Sea.

Development and evaluation of functional gene arrays for detection of selected genes in the environment

To determine the potential of DNA array technology for assessing functional gene diversity and distribution, a prototype microarray was constructed with genes involved in nitrogen cycling: nitrite reductase (nirS and nirK) genes, ammonia mono-oxygenase (amoA) genes, and methane mono-oxygenase (pmoA) genes from pure cultures and those cloned from marine sediments. In experiments using glass slide microarrays, genes possessing less than 80 to 85% sequence identity were differentiated under hybridization conditions of high stringency (65 degrees C). The detection limit for nirS genes was approximately 1 ng of pure genomic DNA and 25 ng of soil community DNA using our optimized protocol. A linear quantitative relationship (r(2) = 0.89 to 0.94) was observed between signal intensity and target DNA concentration over a range of 1 to 100 ng for genomic DNA (or genomic DNA equivalent) from both pure cultures and mixed communities. However, the quantitative capacity of microarrays for measuring the relative abundance of targeted genes in complex environmental samples is less clear due to divergent target sequences. Sequence divergence and probe length affected hybridization signal intensity within a certain range of sequence identity and size, respectively. This prototype functional gene array did reveal differences in the apparent distribution of nir and amoA and pmoA gene families in sediment and soil samples. Our results indicate that glass-based microarray hybridization has potential as a tool for revealing functional gene composition in natural microbial communities; however, more work is needed to improve sensitivity and quantitation and to understand the associated issue of specificity.

Mechanistic study of microbial control of hydrogen sulfide production in oil reservoirs

Microbial control of biogenic production of hydrogen sulfide in oil fields was studied in a model system consisting of pure cultures of the nitrate-reducing, sulfide-oxidizing bacterium (NR-SOB) Thiomicrospira sp. strain CVO and the sulfate-reducing bacterium (SRB) Desulfovibrio sp. strain Lac6, as well as in microbial cultures enriched from produced water of a Canadian oil reservoir. The presence of nitrate at concentrations up to 20 mM had little effect on the rate of sulfate reduction by a pure culture of Lac6. Addition of CVO imposed a strong inhibition effect on production of sulfide. In the absence of added nitrate SRB we were able to overcome this effect after an extended lag phase. Simultaneous addition of CVO and nitrate stopped the production of H2S immediately. The concentration of sulfide decreased to a negligible level due to nitrate-dependent sulfide oxidation activity of CVO. This was not prevented by raising the concentration of Na-lactate, the electron donor for sulfate reduction. Similar results were obtained with enrichment cultures. Enrichments of produced water with sulfide and nitrate were dominated by CVO, whereas enrichments with sulfate and Na-lactate were dominated by SRB. Addition of an NR-SOB enrichment to an SRB enrichment inhibited the production of sulfide. Subsequent addition of sufficient nitrate caused the sulfide concentration to drop to zero. A similar response was seen in the presence of nitrate alone, although after a pronounced lag time, it was needed for emergence of a sizable CVO population. The results of the present study show that two mechanisms are involved in microbial control of biogenic sulfide production. First, addition of NR-SOB imposes an inhibition effect, possibly by increasing the environmental redox potential to levels which are inhibitory for SRB. Second, in the presence of sufficient nitrate, NR-SOB oxidize sulfide, leading to its complete removal from the environment. Successful microbial control of H2S in an oil reservoir is crucially dependent on the simultaneous presence of NR-SOB (either indigenous population or injected) and nitrate in the environment.

Persistence of selected Spartina alterniflora rhizoplane diazotrophs exposed to natural and manipulated environmental variability

Rhizoplane-rhizosphere nitrogen-fixing microorganisms (diazotrophs) are thought to provide a major source of biologically available nitrogen in salt marshes dominated by Spartina alterniflora. Compositional and functional stability has been demonstrated for this important functional group; however, the quantitative responses of specific diazotroph populations to environmental variability have not been assessed. Changes in the relative abundances of selected rhizoplane diazotrophs in response to long-term fertilization were monitored quantitatively by reverse sample genome probing. Fertilization stimulated Spartina, with plant height nearly tripling after 1 year. Fertilization also resulted in significant changes in interstitial porewater parameters. Diazotrophic activity (acetylene reduction assay) was sensitive to the fertilization treatments and was inhibited in some plots on several sampling dates. However, inhibition was never consistent across all of the replicates within a treatment and activity always recovered. The rhizoplane diazotrophs were quite responsive to environmental variability and to experimental treatments, but none were displaced by either environmental variability or experimental treatments. All strains were detected consistently throughout this study, and extensive spatial heterogeneity in the distribution patterns of these organisms was observed. The physiological traits that differentiate the diazotroph populations presumably support competitiveness and niche specialization, resulting in the observed resilience of the diazotroph populations in the rhizosphere.

Culture-dependent and culture-independent characterization of microbial assemblages associated with high-temperature petroleum reservoirs

Recent investigations of oil reservoirs in a variety of locales have indicated that these habitats may harbor active thermophilic prokaryotic assemblages. In this study, we used both molecular and culture-based methods to characterize prokaryotic consortia associated with high-temperature, sulfur-rich oil reservoirs in California. Enrichment cultures designed for anaerobic thermophiles, both autotrophic and heterotrophic, were successful at temperatures ranging from 60 to 90 degrees C. Heterotrophic enrichments from all sites yielded sheathed rods (Thermotogales), pleomorphic rods resembling Thermoanaerobacter, and Thermococcus-like isolates. The predominant autotrophic microorganisms recovered from inorganic enrichments using H(2), acetate, and CO(2) as energy and carbon sources were methanogens, including isolates closely related to Methanobacterium, Methanococcus, and Methanoculleus species. Two 16S rRNA gene (rDNA) libraries were generated from total community DNA collected from production wellheads, using either archaeal or universal oligonucleotide primer sets. Sequence analysis of the universal library indicated that a large percentage of clones were highly similar to known bacterial and archaeal isolates recovered from similar habitats. Represented genera in rDNA clone libraries included Thermoanaerobacter, Thermococcus, Desulfothiovibrio, Aminobacterium, Acidaminococcus, Pseudomonas, Halomonas, Acinetobacter, Sphingomonas, Methylobacterium, and Desulfomicrobium. The archaeal library was dominated by methanogen-like rDNAs, with a lower percentage of clones belonging to the Thermococcales. Our results strongly support the hypothesis that sulfur-utilizing and methane-producing thermophilic microorganisms have a widespread distribution in oil reservoirs and the potential to actively participate in the biogeochemical transformation of carbon, hydrogen, and sulfur in situ.

Sulfur cycling in mixed cultures of sulfide-oxidizing and sulfate- or sulfur-reducing oil field bacteria

Thiomicrospira strain CVO and Arcobacter strain FWKO B are two nitrate-reducing, sulfide-oxidizing bacteria (NR-SOB) isolated from the Coleville field in western Canada. Analysis by reverse sample genome probing (RSGP) indicates that both can be enriched from Coleville produced water samples by addition of nitrate. Neither could be enriched from waters produced from oil fields with a high resident temperature (40-60°C). In co-cultures of the two microorganisms, CVO dominated at lower and FWKO B at higher sulfide concentrations. Sulfide concentrations of up to 15 mM (480 ppm) could be controlled (i.e., reduced to lower values) by the co-culture. Mixed cultures of a sulfate-reducing bacterium (Desulfovibrio strain Lac6) and CVO or FWKO B produced considerably less sulfide than cultures of Lac6 alone, indicating that these NR-SOB can efficiently oxidize sulfide generated by sulfate reduction provided nitrate is present. The same observations were made for mixed cultures of a sulfur-oxidizing bacterium (Desulfuromonas acetoxidans) and CVO. The results indicate that successful nitrate-mediated conversion of sulfide to oxidized forms (sulfur, sulfate) in oil field production waters by NR-SOB requires the absence of high concentrations of electron donors (e.g., lactate, acetate) that can reverse the nitrate-mediated oxidation reaction.

The same species of sulphate-reducing Desulfomicrobium occur in different oil field environments in the north sea

Several metabolic types of sulphate-reducing bacteria, including mesophiles and thermophiles, were successfully obtained from four samples from two different North Sea oil fields. The Gram-negative, rod-shaped, sulphate-reducing strains MM6, EF2, FM2, and GF2 were isolated from drain water, and from drilling muds E, F, and G, respectively. All four isolates grew on lactate, pyruvate, glycerol, and ethanol, with optimal growth temperatures between 25 degrees C and 35 degrees C and at salinities between 0 and 5% NaCl. They were capable of using sulphate, thiosulphate or sulphite, but not nitrate, as electron acceptors. These isolates were tentatively identified to be the same species of Desulfomicrobium based on physiological and biochemical characterization, and 16S rRNA gene analysis. Therefore, the same Desulfomicrobium species was present in different samples from distant oil fields. This result suggests that these microorganisms are likely to be widespread throughout oil field systems, and possibly play an important role in the generation of sulphide.

Conventional and molecular methods for understanding probiotic bacteria functionality in gastrointestinal tracts

The recent successes of probiotic application to limit colonization of foodborne pathogens in the gastrointestinal tracts of food animals ensures continued commercialization and widespread use of such cultures. Given that the the fermentation response and ecological balance of the probiotic consortium appears to be essential for the effectiveness of the cultures, it is essential to develop a methodology to accurately identify and quantitate these organisms during commercial production as well as successful in vivo colonization after administration. However, if further optimization of the effectiveness of defined cultures is to be achieved, methods to assess expression of key metabolic processes occurring during establishment of the probiotic culture as well as its subsequent ability to limit foodborne pathogen colonization are needed. Conventional methods to study individual probiotic gastrointestinal organisms include selective plating to identify specific nutritional groups, but the requirement of strict anaerobiosis for the obligate anaerobic members of these cultures can confound sample handling and preparation. Immunological methods can circumvent some of these problems but are somewhat limited for assessing functionality. The main advantage of using molecular tools is that the genetic diversity of the microflora, as well as their gene activity data are obtainable, both at the community level and at the single species level. Methods are currently available that permit studying individual members of microbial consortia, fluxes in community diversity, spatial distribution of consortia members, and the expression of specific microbial genes within communities. These methods involve the utilization of both DNA- and RNA-targeted probes, gene amplification protocols, and mRNA analysis. The study of mechanisms and functionality can only enhance the potential of probiotic cultures for limiting foodborne pathogen colonization.

Identification of some oomycetes by reverse dot blot hybridization

ABSTRACT An assay was developed that can identify unknown isolates of Pythium or Phytophthora species in a single hybridization. This reverse dot blot system is based on arrays of species-specific amplified fragments or oligonucleotides derived from the internal transcribed spacer (ITS) region, which are blotted as dots on a nylon membrane. By using total DNA from a sample as the template, universal primers, and digoxigenin-dUTP, the ITS was amplified and labeled simultaneously by the polymerase chain reaction (PCR). A small aliquot of the resultant labeled and amplified product was used as a probe for hybridization to a dot blot membrane that contained the immobilized species-specific oligonucleotides or amplified PCR fragments. The reverse dot blot system based on arrays of oligonucleotides showed far fewer cross-hybridizations than one based on entire amplified ITS I fragments. Unknown species can be identified simply by visualizing the positive hybridization reaction between the DNA labeled directly from the sample and the immobilized specific oligonucleotide. Currently, the assay can be used to identify Pythium aphanidermatum, P. ultimum, P. acanthicum, and Phytophthora cinnamomi. An oligonucleotide that was originally designed to identify Phytophthora hybridized to 10 of the 14 Phytophthora species tested. Another oligonucleotide designed to identify oomycetes hybridized to the 68 species tested, which represented two of the four orders of this phylum.

Dominant marine bacterioplankton species found among colony-forming bacteria

The density of specific aquatic bacteria was determined by use of whole-genome DNA hybridization towards community DNA. From a coastal marine environment (northern Baltic Sea), 48 specific bacteria were isolated on solid media over a 1-year period. Based on the presented hybridization protocol, the total density of the isolates ranged between 7 and 69% of the bacteria determined by acridine orange direct counts. When compared to the number of nucleoid-containing cells, the range increased to 29 to 111%. Thus, our results showed that bacteria able to form colonies on solid media accounted for a large fraction of the bacterioplankton. There were significant changes in the density of the different bacteria over the year, suggesting that bacterioplankton exhibit a seasonal succession analogous to phytoplankton. The bacteria studied were of diverse phylogenetic origin, being distributed among the alpha, beta, and gamma subdivisions of the class Proteobacteria and the cytophaga-flexibacter group. Partial 16S rRNA gene sequence analysis of 29 Baltic Sea isolates as well as of 30 Southern California Bight isolates showed that a majority of the isolates had low similarity (0.85 to 0.95) to reported sequence data. This indicated that the diversity of marine bacteria able to grow on solid media is largely unexplored.

Identifying numerically abundant culturable bacteria from complex communities: an example from a lignin enrichment culture

Culturable bacteria that were numerically important members of a marine enrichment community were identified and characterized phylogenetically. Selective and nonselective isolation methods were used to obtain 133 culturable bacterial isolates from model marine communities enriched with the high-molecular-weight (lignin-rich) fraction of pulp mill effluent. The culture collection was screened against community DNA from the lignin enrichments by whole-genome hybridization methods, and three marine bacterial isolates were identified as being numerically important in the communities. One isolate was in the alpha-subclass of Proteobacteria, and the other two were in the gamma-subclass of Proteobacteria. Isolate-specific 16S rRNA oligonucleotide probes designed to precisely quantify the isolates in the lignin enrichment communities indicated contributions ranging from 2 to 32% of enrichment DNA, values nearly identical to those originally obtained by the simpler whole-genome hybridization method. Two 16S rRNA sequences closely related to that of one of the isolates, although not identical, were amplified via PCR from the seawater sample originally used to inoculate the enrichment medium. Partial sequences of 14 other isolates revealed significant phylogenetic diversity and unusual sequences among the culturable lignin enrichment bacteria, with the Proteobacteria, Cytophaga-Flavobacterium, and gram-positive groups represented.

Degradative capacities and 16S rRNA-targeted whole-cell hybridization of sulfate-reducing bacteria in an anaerobic enrichment culture utilizing alkylbenzenes from crude oil

A mesophilic sulfate-reducing enrichment culture growing anaerobically on crude oil was used as a model system to study which nutritional types of sulfate-reducing bacteria may develop on original petroleum constituents in oil wells, tanks, and pipelines. Chemical analysis of oil hydrocarbons during growth revealed depletion of toluene and o-xylene within 1 month and of m-xylene, o-ethyltoluene, m-ethyltoluene, m-propyltoluene, and m-isopropyltoluene within approximately 2 months. In anaerobic counting series, the highest numbers of CFU (6 x 10(6) to 8 x 10(6) CFU ml-1) were obtained with toluene and benzoate. Almost the same numbers were obtained with lactate, a substrate often used for detection of the vibrio-shaped, incompletely oxidizing Desulfovibrio sp. In the present study, however, lactate yielded mostly colonies of oval to rod-shaped, completely oxidizing, sulfate-reducing bacteria which were able to grow slowly on toluene or crude oil. Desulfovibrio species were detected only at low numbers (3 x 10(5) CFU ml-1). In agreement with this finding, a fluorescently labeled, 16S rRNA-targeted oligonucleotide probe described in the literature as specific for members of the Desulfovibrionaceae (suggested family) hybridized only with a small portion (< 5%) of the cells in the enrichment culture. These results are consistent with the observation that known Desulfovibrio species do not utilize aromatic hydrocarbons, the predominant substrates in the enrichment culture. All known sulfate-reducing bacteria which utilize aromatic compounds belong to a separate branch, the Desulfobacteriaceae (suggested family). Most members of this family are complete oxidizers. For specific hybridization with members of this branch, the probe had to be modified by a nucleotide exchange. Indeed, this modified probe hybridized with more than 95% of the cells in the enrichment culture. The results show that completely oxidizing, alkylbenzene-utilizing sulfate-reducing bacteria rather than Desulfovibrio species have to be considered in attempts to understand the microbiology of sulfide production in oil wells, tanks, and pipelines when no electron donors other than the indigenous oil constituents are available.

Characterization of 16S rRNA genes from oil field microbial communities indicates the presence of a variety of sulfate-reducing, fermentative, and sulfide-oxidizing bacteria

Oil field bacteria were characterized by cloning and sequencing of PCR-amplified 16S rRNA genes. A variety of gram-negative, sulfate-reducing bacteria was detected (16 members of the family Desulfovibrionaceae and 8 members of the family Desulfobacteriaceae). In contrast, a much more limited number of anaerobic, fermentative, or acetogenic bacteria was found (one Clostridium sp., one Eubacterium sp., and one Synergistes sp.). Potential sulfide oxidizers and/or microaerophiles (Thiomicrospira, Arcobacter, Campylobacter, and Oceanospirillum spp.) were also detected. The first two were prominently amplified from uncultured production water DNA and represented 28 and 47% of all clones, respectively. Growth on media containing sulfide as the electron donor and nitrate as the electron acceptor and designed for the isolation of Thiomicrospira spp. gave only significant enrichment of the Campylobacter sp., which was shown to be present in different western Canadian oil fields. This newly discovered sulfide oxidizer may provide a vital link in the oil field sulfur cycle by reoxidizing sulfide formed by microbial sulfate or sulfur reduction.

Characterization of sulfate-reducing bacteria isolated from oil-field waters

The occurrence and metabolic capacities of sulfate-reducing bacteria (SRB) were studied in 23 water samples taken from producing wells at 14 different sites. Oil fields in France, the North Sea, and the Gulf of Guinea were selected and classified according to physicochemical parameters (salinity ranging from 0.3 to 120 g.L-1 and temperature between 29 and 85 degrees C). After the distribution of SRB within oil fields was studied, several strains of SRB were isolated and characterized metabolically. Twenty of the thirty-seven strains were not related to any known species. Most of the identified strains were members of the genera Desulfovibrio and Desulfotomaculum by molecular, morphological, and physiological properties.

Direct isolation of functional genes encoding cellulases from the microbial consortia in a thermophilic, anaerobic digester maintained on lignocellulose

Gene libraries ("zoolibraries") were constructed in Escherichia coli using DNA isolated from the mixed liquor of thermophilic, anaerobic digesters, which were in continuous operation with lignocellulosic feedstocks for over 10 years. Clones expressing cellulase and xylosidase were readily recovered from these libraries. Four clones that hydrolyzed carboxymethylcellulose and methylumbelliferyl-beta-D-cellobiopyranoside were characterized. All four cellulases exhibited temperature optima (60-65 degrees C) and pH optima (pH 6-7) in accordance with conditions of the enrichment. The DNA sequence of the insert in one clone (plasmid pFGH1) was determined. This plasmid encoded an endoglucanase (celA) and part of a putative beta-glucosidase (celB), both of which were distinctly different from all previously reported homologues. CelA protein shared limited homology with members of the A3 subfamily of cellulases, being similar to endoglucanase C from Clostridium thermocellum (40% identity). The N-terminal part of CelB protein was most similar to beta-glucosidase from Pseudomonas fluorescens subsp. cellulosa (28% homology). The use of zoolibraries constructed from natural or laboratory enrichment cultures offers the potential to discover many new enzymes for biotechnological applications.

Genetic diversity of Desulfovibrio spp. in environmental samples analyzed by denaturing gradient gel electrophoresis of [NiFe] hydrogenase gene fragments

The genetic diversity of Desulfovibrio species in environmental samples was determined by denaturing gradient gel electrophoresis (DGGE) of PCR-amplified [NiFe] hydrogenase gene fragments. Five different PCR primers were designed after comparative analysis of [NiFe] hydrogenase gene sequences from three Desulfovibrio species. These primers were tested in different combinations on the genomic DNAs of a variety of hydrogenase-containing and hydrogenase-lacking bacteria. One primer pair was found to be specific for Desulfovibrio species only, while the others gave positive results with other bacteria also. By using this specific primer pair, we were able to amplify the [NiFe] hydrogenase genes of DNAs isolated from environmental samples and to detect the presence of Desulfovibrio species in these samples. However, only after DGGE analysis of these PCR products could the number of different Desulfovibrio species within the samples be determined. DGGE analysis of PCR products from different bioreactors demonstrated up to two bands, while at least five distinguishable bands were detected in a microbial mat sample. Because these bands most likely represent as many Desulfovibrio species present in these samples, we conclude that the genetic diversity of Desulfovibrio species in the natural microbial mat is far greater than that in the experimental bioreactors.

Conservation of the genes for dissimilatory sulfite reductase from Desulfovibrio vulgaris and Archaeoglobus fulgidus allows their detection by PCR

The structural genes for dissimilatory sulfite reductase (desulfoviridin) from Desulfovibrio vulgaris Hilden-borough were cloned as a 7.2-kbp SacII DNA fragment. Nucleotide sequencing indicated the presence of a third gene, encoding a protein of only 78 amino acids, immediately downstream from the genes for the alpha and beta subunits (dsvA and dsvB). We designated this protein DsvD and the gene encoding it the dsvD gene. The alpha- and beta-subunit sequences are highly homologous to those of the dissimilatory sulfite reductase from Archaeoglobus fulgidus, a thermophilic archaeal sulfate reducer, which grows optimally at 83 degrees C. A gene with significant homology to dsvD was also found immediately downstream from the dsrAB genes of A. fulgidus. The remarkable conservation of gene arrangement and sequence across domain (bacterial versus archaeal) and physical (mesophilic versus thermophilic) boundaries indicates an essential role for DsvD in dissimilatory sulfite reduction and allowed the construction of conserved deoxyoligonucleotide primers for detection of the dissimilatory sulfite reductase genes in the environment.

Bacterial biofilms and biofouling

Advances in the development and application of investigative tools, such as scanning confocal laser microscopy and genetic techniques, are leading to new insights concerning the composition, structure, and function of bacterial biofilms. Molecular biology has also demonstrated that bacteria are able to 'sense' surface environments, altering their pattern of gene expression. Recent studies on mechanisms of bacterial attachment provide further evidence for the diversity of attachment mechanisms, as do investigations of attachment interactions between bacteria and invertebrates.