Expression vectors for the use of eukaryotic luciferases as bacterial markers with different colors of luminescence

Building a genome engineering toolbox in nonmodel prokaryotic microbes

The realization of a sustainable bioeconomy requires our ability to understand and engineer complex design principles for the development of platform organisms capable of efficient conversion of cheap and sustainable feedstocks (e.g., sunlight, CO₂ , and nonfood biomass) into biofuels and bioproducts at sufficient titers and costs. For model microbes, such as Escherichia coli, advances in DNA reading and writing technologies are driving the adoption of new paradigms for engineering biological systems. Unfortunately, microbes with properties of interest for the utilization of cheap and renewable feedstocks, such as photosynthesis, autotrophic growth, and cellulose degradation, have very few, if any, genetic tools for metabolic engineering. Therefore, it is important to develop "design rules" for building a genetic toolbox for novel microbes. Here, we present an overview of our current understanding of these rules for the genetic manipulation of prokaryotic microbes and the available genetic tools to expand our ability to genetically engineer nonmodel systems.

Using transposition to introduce eGFP fusions in Sinorhizobium meliloti: A tool to analyze protein localization patterns in bacteria

Conventional methods used for the in vivo analysis of subcellular protein localizations and their spatio-temporal dynamics in prokaryotes are based on either the engineering of N(amino)- or C(carboxy)-terminal fusions of fluorescent proteins with the protein of interest, or involved probing internal sites for tag integration. In addition, the use of inducible or constitutive promoters for the expression of fluorescent fusion proteins can lead to overexpression and result in localization artifacts. Here, we describe a method for the synthesis of fluorescent fusion proteins using transposable elements, which can randomly integrate in the internal sections of the protein coding sequence to produce full-length fluorescent fusion proteins expressed at endogenous levels. The established method was used for investigating subcellular localization of proteins in the soil bacterium and plant symbiont Sinorhizobium meliloti. Two constructs for transposition-based insertion of the enhanced green fluorescent protein (eGFP), as well as for in vivo excision of the selection marker for the production of full-length proteins were engineered. Conjugation with pHB14 plasmid and induction of the transposition in S. meliloti produced approx. 3.22×10⁴ transconjugant colonies harboring the fluorescent marker with the transposition efficiency of 0.8%. Sixteen randomly targeted proteins of diverse functions, fused to the eGFP were identified and analyzed in living cells by epifluorescence microscopy, demonstrating the suitability of the novel tool for massive, random production of fluorescent proteins and for following of these proteins with different localizations inside the prokaryotic cell.

Rational elicitation of cold-sensitive phenotypes

Cold-sensitive phenotypes have helped us understand macromolecular assembly and biological phenomena, yet few attempts have been made to understand the basis of cold sensitivity or to elicit it by design. We report a method for rational design of cold-sensitive phenotypes. The method involves generation of partial loss-of-function mutants, at either buried or functional sites, coupled with selective overexpression strategies. The only essential input is amino acid sequence, although available structural information can be used as well. The method has been used to elicit cold-sensitive mutants of a variety of proteins, both monomeric and dimeric, and in multiple organisms, namely Escherichia coli, Saccharomyces cerevisiae, and Drosophila melanogaster This simple, yet effective technique of inducing cold sensitivity eliminates the need for complex mutations and provides a plausible molecular mechanism for eliciting cold-sensitive phenotypes.

'Deadman' and 'Passcode' microbial kill switches for bacterial containment

Biocontainment systems that couple environmental sensing with circuit-based control of cell viability could be used to prevent escape of genetically modified microbes into the environment. Here we present two engineered safe-guard systems: the Deadman and Passcode kill switches. The Deadman kill switch uses unbalanced reciprocal transcriptional repression to couple a specific input signal with cell survival. The Passcode kill switch uses a similar two-layered transcription design and incorporates hybrid LacI/GalR family transcription factors to provide diverse and complex environmental inputs to control circuit function. These synthetic gene circuits efficiently kill Escherichia coli and can be readily reprogrammed to change their environmental inputs, regulatory architecture and killing mechanism.

Stress responsive bacteria: biosensors as environmental monitors

The delicate and dynamic balance of the physiological steady state and its maintenance is well characterized by studies of bacterial stress response. Through the use of genetic analysis, numerous stress regulons, their physiological regulators and their biochemical processes have been delineated. In particular, transcriptionally activated stress regulons are subjects of study and application. These regulons include those that respond to macromolecular damage and toxicity as well as to nutrient starvation. The convenience of reporter gene fusions has allowed the creation of biosensor strains, resulting from the fusion of stress-responsive promoters with a variety of reporter genes. Such cellular biosensors are being used for monitoring dynamic systems and can report the presence of environmental stressors in real time. They provide a greater range of sensitivity, e.g. to sub-lethal concentrations of toxicants, than the simple assessment of cell viability. The underlying physiological context of the reporter strains results in the detection of bioavailable concentrations of both toxicants and nutrients. Culture conditions and host strain genotypes can be customized so as to maximize the sensitivity of the strain for a particular application. Collections of specific strains that are grouped in panels are used to diagnose targets or mode of action for unknown toxicants. Further application in massive by parallel DNA and gene fusion arrays greatly extends the information available for diagnosis of modes of action and may lead to development of novel high-throughput screens. Future studies will include more panels, arrays, as well as single reporter cell detection for a better understanding of the population heterogeneity during stress response. New knowledge of physiology gained from further studies of novel systems, or using innovative methods of analysis, will undoubtedly yield still more useful and informative environmental biosensors.

Kinetics of regulated protein-protein interactions revealed with firefly luciferase complementation imaging in cells and living animals

Signaling pathways regulating proliferation, differentiation, and apoptosis are commonly mediated through protein-protein interactions as well as reversible phosphorylation of proteins. To facilitate the study of regulated protein-protein interactions in cells and living animals, we optimized firefly luciferase protein fragment complementation by screening incremental truncation libraries of N- and C-terminal fragments of luciferase. Fused to the rapamycin-binding domain (FRB) of the kinase mammalian target of rapamycin and FK506-binding protein 12 (FKBP), respectively, the optimized FRB-N-terminal luciferase fragment (NLuc)/C-terminal luciferase fragment (CLuc)-FKBP luciferase complementation imaging (LCI) pair reconstituted luciferase activity in cells upon single-site binding of rapamycin in an FK506-competitive manner. LCI was used in three independent applications. In mice bearing implants of cells expressing the FRB-NLuc/CLuc-FKBP LCI pair, dose- and time-dependent luciferase activity allowed target-specific pharmacodynamic analysis of rapamycin-induced protein-protein interactions in vivo. In cells expressing a Cdc25C-NLuc/CLuc-14-3-3epsilon LCI pair, drug-mediated disruption of cell cycle regulated protein-protein interactions was demonstrated with the protein kinase inhibitor UCN-01 in a phosphoserine-dependent manner. When applied to IFN-gamma-dependent activation of Janus kinase/signal transducer and activator of transcription 1 (STAT1), LCI revealed, in the absence of ligand-induced phosphorylation, STAT1 proteins existing in live cells as preformed dimers. Thus, optimized LCI provides a platform for near real-time detection and characterization of regulated and small molecule-induced protein-protein interactions in intact cells and living animals and should enable a wide range of novel applications in drug discovery, chemical genetics, and proteomics research.

Characterization of an oxygen-dependent inducible promoter, the Escherichia coli nar promoter, in gram-negative host strains

The Escherichia coli nar promoter is maximally induced under anaerobic conditions in the presence of nitrate ion or under anaerobic only conditions, depending on the genotype of the E. coli nar promoter. Previously, we found that the E. coli nar promoter has some desirable characteristics as an inducible promoter in the E. coli host strains. In this study, the E. coli nar promoter with lacZ gene at the downstream was cloned onto a broad-host-range Gram-negative vector, pBBR122. It was then induced in some other Gram-negative host strains, such as Agrobacterium, Pseudomonas, and Rhizobium, to determine whether the E. coli nar promoter could be used as an inducible promoter in these strains. From shake-flask experiments it was found that the wild-type E. coli nar promoter cloned onto pBBR122, pNW61, was suppressed under aerobic conditions in an Agrobacterium host strain, was partially induced under microaerobic only conditions, and was maximally induced under microaerobic conditions in the presence of nitrate ion. Whereas the mutant-type E. coli nar promoter cloned onto pBBR122, pNW618, was suppressed under aerobic conditions and was maximally induced under microaerobic conditions, regardless of the presence of nitrate ion. This kind of induction pattern observed for the E. coli nar promoters in the Agrobacterium host strain was similar to that observed for the E. coli nar promoters in the E. coli host strain. On the other hand, it was found that both of the E. coli nar promoters, pNW61 and pNW618, in a Pseudomonas host strain were partially induced under aerobic conditions and were maximally induced under microaerobic conditions, regardless of the presence of nitrate. Finally, it was found that both of the E. coli nar promoters in a Rhizobium host strain were minimally induced, regardless of the presence of oxygen or nitrate ion. Similar induction patterns for the three strains were also observed from fermentor experiments in which the dissolved oxygen (DO) level was tightly controlled. From an evolutionary point of view, the results from the three Gram-negative host strains indicate that the E. coli nar promoter system, including the promoter and regulatory proteins, was best conserved in the Agrobacterium host strain and the least conserved in the Rhizobium host strain. From an industrial point of view, the results indicate that the E. coli nar promoter system can be used as an oxygen-dependent inducible promoter in both Agrobacterium and Pseudomonas host strains.

Improvement of recombinant protein yield by a combination of transcriptional amplification and stabilization of gene expression

We explored the use of a cascade circuit for heterologous gene expression that consists of a regulatory module with a salicylate-inducible system that controls the expression of a second regulator, xylS2, whose product is activated by common inducers. Activation and increasing the concentration of the second regulator synergistically induced heterologous genes downstream of the Pm promoter in the expression module. This module can be placed in multicopy vectors or in the chromosome of a host strain by means of minitransposons. Using reporter genes, we evaluated gene regulation capacity and gross production of the system with different configurations. The highest yield was obtained when the expression module was in a multicopy plasmid after a 6-h induction. However, expression modules in plasmids showed low stability after induction even with selective pressure. The chromosomal configuration had the lowest basal levels and induced levels comparable to those of plasmid configurations, resulting in accumulation of more than 10% of the total protein. Unlike the configurations in plasmids, the yield was maintained for at least 3 days even without selective pressure. In conclusion, the cascade system in the chromosome configuration is more efficient for long-term fermentation because of the great stability of the overexpressing phenotype in spite of the high levels of expression.

Plasmid Transfer Detection in Soil using the Inducible lPR System Fused to Eukaryotic Luciferase Genes

We report a model system for plasmid transfer analysis using the regulated lambda phage right promoter, lPR, fused to luc and lucOR as reporter genes. We have demonstrated that the systems cI857-lPR::luc and cI857-lPR::lucOR are temperature-inducible in Escherichia coli but not in other Gram-negative bacteria analyzed, enabling detection of luminescence when plasmids were mobilized from E. coli to those Gram-negative backgrounds. Using light for the detection, we have observed plasmid transfer from E. coli harboring RK2 and R388 derived plasmids to Pseudomonas putida KT2440 (co-introduced with donors) and to indigenous microorganisms, in vitro and in nonsterile soil microcosms. The importance of nutrients for an efficient plasmid transfer in nonsterile soil microcosms has been confirmed. When plasmid transfer experiments were carried out into nonsterile soil microcosms, significant populations of indigenous transconjugants arose. This system provides efficient marker genes and avoids the use of antibiotics for the selection of transconjugants.

How novel methods can help discover more information about foodborne pathogens

Considerable emphasis is being placed on quantitative risk assessment modelling as a basis for regulation of trade in food products. However, for models to be accurate, information about the behaviour of potential pathogens in foods needs to be available. The question is how to obtain this knowledge in a simple and cost effective way. One technique that has great potential is the use of reporter bacteria which have been genetically modified to express a phenotype that can be easily monitored, such as light production in luminescent organisms. Bacteria carrying these (lux) genes can easily be detected using simple luminometers or more sophisticated low light imaging equipment.By monitoring light output from these bacteria over time, it can easily be determined if the organism is growing (resulting in an increase in light emission), is dead (causing a decrease in light production) or is injured (light output remains constant). The use of imaging systems allows the response of bioluminescent bacteria to be studied directly on the food, making the technique even more useful. Applications of bioluminescence are discussed below and include use as reporters of gene expression; biocide efficacy and antibiotic susceptibility; sub-lethal injury; adhesion and biofilm formation; the microbial ecology of foods; pathogenesis; and as biosensors.

Bioluminescence-based assays for detection and characterization of bacteria and chemicals in clinical laboratories

OBJECTIVES

To survey recent advances in the application of bioluminescence to public health problems. The usefulness of bacterial (lux) and eucaryotic (luc) luciferase genes is presented, along with several examples that demonstrate their value as "reporters" of many endpoints of clinical concern.

CONCLUSIONS

The development of new technologies for monitoring biological and chemical contaminants is in continuous progress. Recent excitement in this area has come from the use of genes encoding enzymes for bioluminescence as reporter systems. Applications of the recombinant luciferase reporter phage concept now provide a sensitive approach for bacterial detection, their viability, and sensitivity to antimicrobial agents. Moreover, a number of fusions of the lux and luc genes to stress inducible genes in different bacteria can allow a real-time measurement of gene expression and determination of cellular viability, and also constitute a new tool to detect toxic chemicals and their bioavailability.

Green fluorescent protein as a marker for Pseudomonas spp

The development of sensitive methods for observing individual bacterial cells in a population in experimental models and natural environments, such as in biofilms or on plant roots, is of great importance for studying these systems. We report the construction of plasmids which constitutively express a bright mutant of the green fluorescent protein of the jellyfish Aequorea victoria and are stably maintained in Pseudomonas spp. We demonstrate the utility of these plasmids to detect individual cells in two experimental laboratory systems: (i) the examination of a mixed bacterial population of Pseudomonas aeruginosa and Burkholderia cepacia attached to an abiotic surface and (ii) the association of Pseudomonas fluorescens WCS365 with tomato seedling roots. We also show that two plasmids, pSMC2 and pGB5, are particularly useful, because they are stable in the absence of antibiotic selection, they place an undetectable metabolic burden on cells that carry the plasmids, and cells carrying these constructs continue to fluoresce even after 7 days in culture without the addition of fresh nutrients. The construction of improved Escherichia coli-Pseudomonas shuttle vectors which carry multiple drug resistance markers also is described.

Quantification of the presence and activity of specific microorganisms in nature

Traditional techniques for assessment of microbial numbers and activity generally lack the specificity required for risk assessment following environmental release of genetically engineered microbial inocula. Immunological and molecular-based techniques, such as DNA probing and genetic tagging, were initially used to determine the presence or absence of microorganisms in environmental samples. Increasingly they are being developed for quantification of populations of specific organisms, either indigenous or introduced, in the environment. In addition, they are being used to quantify the activity of particular organisms or groups of organisms, greatly extending the range of techniques available to the microbial ecologist. This article reviews the use of traditional techniques for the quantification of microbial population size and activity and the application of molecular techniques, including DNA probing, genetic marking, use of fluorescent probes, and quantitative PCR, in combination with advanced cell detection techniques such as confocal laser scanning microscopy and flow cytometry.

Improved broad-host-range RK2 vectors useful for high and low regulated gene expression levels in gram-negative bacteria

This report describes the construction and use of improved broad-host-range expression vectors based on the previously constructed pJB137 and pJB653 plasmids (Blatny et al., 1997). These vectors contain the minimal replicon of RK2 and the inducible Pu or Pm promoters together with their regulatory xylR or xylS genes, respectively, from the Pseudomonas putida TOL plasmid pWWO. A set of ATG vectors were derived from pJB653, and these vectors are characterized by the relatively small size, the presence of multiple cloning sites downstream of Pm, the establishment of their nucleotide sequence, the presence of RK2 oriT, and different antibiotic selection markers. The copy numbers of all the vectors can easily be modified by using copy-up mutations of the trfA gene, required for initiation of replication of RK2 replicons. The vectors were used to study the expression levels of the Acetobacter xylinum phosphoglucomutase gene celB and the two commonly used reporter genes luc and cat in Escherichia coli, Pseudomonas aeruginosa, and Xanthomonas campestris. Good induction properties and tight regulation of Pm were achieved in all three species tested, and higher gene expression levels were obtained by using the ATG vectors compared to pJB653. By introducing different trfA copy-up mutations into the vectors, a wide range of gene expression levels from Pu and Pm were obtained in E. coli. Induced expression levels of luc, cat, and celB from Pm were found to be comparable to or higher than those from the Ptrc and PT7 promoters located on high copy number plasmids. The induced levels of Luc activity were higher in P. aeruginosa than in E. coli, indicating that these vectors may be useful for maximization of gene expression in strains other than E. coli. We believe that the well-characterized vectors described here are useful for gene expression studies and routine cloning experiments in many Gram-negative bacteria.

Nucleic acids in the environment

The past year has witnessed several excellent advances in basic and applied research on nucleic acids in the environment. Improved methods for extracting nucleic acids from environmental samples have been published, as well as information on the use of reporter genes in bacteria, natural genetic transformation in soil and DNA adsorption to soil. These advances will have a significant impact on both future research and the way in which we view nucleic acids in the environment.

Luminescence-based systems for detection of bacteria in the environment

The development of techniques for detection and tracking of microorganisms in natural environments has been accelerated by the requirement for assessment of the risks associated with environmental release of genetically engineered microbial inocula. Molecular marker systems are particularly appropriate for such studies and luminescence-based markers have the broadest range of applications, involving the introduction of prokaryotic (lux) or eukaryotic (luc) genes for the enzyme luciferase. Lux or luc genes can be detected on the basis of unique DNA sequences by gene probing and PCR amplification, but the major advantage of luminescence-based systems is the ability to detect light emitted by marked organisms or by luciferase activity in cell-free extracts. Luminescent colonies can be detected by eye, providing distinction from colonies of indigenous organisms, and the sensitivity of plate counting can be increased greatly by CCD imaging. Single cells or microcolonies of luminescent organisms can also be detected in environmental samples by CCD image-enhanced microscopy, facilitating study of their spatial distribution. The metabolic activity of luminescence-marked populations can be quantified by luminometry and does not require extraction of cells or laboratory growth. Metabolic activity, and potential activity, of marked organisms therefore can be measured during colonization of soil particles and plant material in real time without disturbing the colonization process. In comparison with traditional activity techniques, luminometry provides significant increases in sensitivity, accuracy, and, most importantly, selectivity, as activity can be measured in the presence of indigenous microbial communities. The sensitivity, speed, and convenience of luminescence measurements make this a powerful technique that is being applied to the study of an increasingly wide range of ecological problems. These include microbial survival and recovery, microbial predation, plant pathogenicity, phylloplane and rhizosphere colonization and reporting of gene expression in environmental samples.