Malonyl-coenzyme A reductase in the modified 3-hydroxypropionate cycle for autotrophic carbon fixation in archaeal Metallosphaera and Sulfolobus spp

Dynamic lid domain of Chloroflexus aurantiacus Malonyl-CoA reductase controls the reaction

Malonyl-Coenzyme A Reductase (MCR) in Chloroflexus aurantiacus, a characteristic enzyme of the 3-hydroxypropionate (3-HP) cycle, catalyses the reduction of malonyl-CoA to 3-HP. MCR is a bi-functional enzyme; in the first step, malonyl-CoA is reduced to the free intermediate malonate semialdehyde by the C-terminal region of MCR, and this is further reduced to 3-HP by the N-terminal region of MCR. Here we present the crystal structures of both N-terminal and C-terminal regions of the MCR from C. aurantiacus. A catalytic mechanism is suggested by ligand and substrate bound structures, and structural and kinetic studies of MCR variants. Both MCR structures reveal one catalytic, and one non-catalytic SDR (short chain dehydrogenase/reductase) domain. C-terminal MCR has a lid domain which undergoes a conformational change and controls the reaction. In the proposed mechanism of the C-terminal MCR, the conversion of malonyl-CoA to malonate semialdehyde is based on the reduction of malonyl-CoA by NADPH, followed by the decomposition of the hemithioacetal to produce malonate semialdehyde and coenzyme A. Conserved arginines, Arg734 and Arg773 are proposed to play key roles in the mechanism and conserved Ser719, and Tyr737 are other essential residues forming an oxyanion hole for the substrate intermediates.

Lambda-PCR for precise DNA assembly and modification

Lambda-polymerase chain reaction (λ-PCR) is a novel and open-source method for DNA assembly and cloning projects. λ-PCR uses overlap extension to ultimately assemble linear and circular DNA fragments, but it allows the single-stranded DNA (ssDNA) primers of the PCR extension to first exist as double-stranded DNA (dsDNA). Having dsDNA at this step is advantageous for the stability of large insertion products, to avoid inhibitory secondary structures during direct synthesis, and to reduce costs. Three variations of λ-PCR were created to convert an initial dsDNA product into an ssDNA "megaprimer" to be used in overlap extension: (i) complete digestion by λ-exonuclease, (ii) asymmetric PCR, and (iii) partial digestion by λ-exonuclease. Four case studies are presented that demonstrate the use of λ-PCR in simple gene cloning, simultaneous multipart assemblies, gene cloning not achievable with commercial kits, and the use of thermodynamic simulations to guide λ-PCR assembly strategies. High DNA assembly and cloning efficiencies have been achieved with λ-PCR for a fraction of the cost and time associated with conventional methods and some commercial kits.

Recent Advances, Challenges and Metabolic Engineering Strategies in the Biosynthesis of 3-Hydroxypropionic Acid

As an attractive and valuable platform chemical, 3-hydroxypropionic acid (3-HP) can be used to produce a variety of industrially important commodity chemicals and biodegradable polymers. Moreover, the biosynthesis of 3-HP has drawn much attention in recent years due to its sustainability and environmental friendliness. Here, we focus on recent advances, challenges and metabolic engineering strategies in the biosynthesis of 3-HP. While glucose and glycerol are major carbon sources for its production of 3-HP via microbial fermentation, other carbon sources have also been explored. To increase yield and titer, synthetic biology and metabolic engineering strategies have been explored, including modifying pathway enzymes, eliminating flux blockages due to byproduct synthesis, eliminating toxic byproducts, and optimizing via genome-scale models. This review also provides insights on future directions for 3-HP biosynthesis. This article is protected by copyright. All rights reserved.

Enzymes, In Vivo Biocatalysis, and Metabolic Engineering for Enabling a Circular Economy and Sustainability

Since the industrial revolution, the rapid growth and development of global industries have depended largely upon the utilization of coal-derived chemicals, and more recently, the utilization of petroleum-based chemicals. These developments have followed a linear economy model (produce, consume, and dispose). As the world is facing a serious threat from the climate change crisis, a more sustainable solution for manufacturing, i.e., circular economy in which waste from the same or different industries can be used as feedstocks or resources for production offers an attractive industrial/business model. In nature, biological systems, i.e., microorganisms routinely use their enzymes and metabolic pathways to convert organic and inorganic wastes to synthesize biochemicals and energy required for their growth. Therefore, an understanding of how selected enzymes convert biobased feedstocks into special (bio)chemicals serves as an important basis from which to build on for applications in biocatalysis, metabolic engineering, and synthetic biology to enable biobased processes that are greener and cleaner for the environment. This review article highlights the current state of knowledge regarding the enzymatic reactions used in converting biobased wastes (lignocellulosic biomass, sugar, phenolic acid, triglyceride, fatty acid, and glycerol) and greenhouse gases (CO₂ and CH₄) into value-added products and discusses the current progress made in their metabolic engineering. The commercial aspects and life cycle assessment of products from enzymatic and metabolic engineering are also discussed. Continued development in the field of metabolic engineering would offer diversified solutions which are sustainable and renewable for manufacturing valuable chemicals.

Functional compartmentalization and metabolic separation in a prokaryotic cell

The prokaryotic cell is traditionally seen as a "bag of enzymes," yet its organization is much more complex than in this simplified view. By now, various microcompartments encapsulating metabolic enzymes or pathways are known for Bacteria These microcompartments are usually small, encapsulating and concentrating only a few enzymes, thus protecting the cell from toxic intermediates or preventing unwanted side reactions. The hyperthermophilic, strictly anaerobic Crenarchaeon Ignicoccus hospitalis is an extraordinary organism possessing two membranes, an inner and an energized outer membrane. The outer membrane (termed here outer cytoplasmic membrane) harbors enzymes involved in proton gradient generation and ATP synthesis. These two membranes are separated by an intermembrane compartment, whose function is unknown. Major information processes like DNA replication, RNA synthesis, and protein biosynthesis are located inside the "cytoplasm" or central cytoplasmic compartment. Here, we show by immunogold labeling of ultrathin sections that enzymes involved in autotrophic CO₂ assimilation are located in the intermembrane compartment that we name (now) a peripheric cytoplasmic compartment. This separation may protect DNA and RNA from reactive aldehydes arising in the I. hospitalis carbon metabolism. This compartmentalization of metabolic pathways and information processes is unprecedented in the prokaryotic world, representing a unique example of spatiofunctional compartmentalization in the second domain of life.

Use of acetate for the production of 3-hydroxypropionic acid by metabolically-engineered Pseudomonas denitrificans

The use of acetate as carbon feedstock can enhance sustainability and economics of the current bio-productions. This study explored the potential of acetate for the production of 3-hydroxypropionic acid by engineered Pseudomonas denitrificans. Heterologous mcr (encoding malonyl-CoA reductase) from Chloroflexus aurantiacus and endogenous accABCD (encoding acetyl-CoA carboxylase) were overexpressed in P. denitrificans. Carbon flux to 3-HP synthesis at the malonyl-CoA node was promoted by suppressing fatty acid synthesis through addition of cerulenin or deletion of fabF gene. In addition, stimulation of glyoxylate shunt and/or TCA cycle were attempted. Recombinant P. denitrificans overexpressing mcr and accABCD produced 19.3 mM 3-HP with cerulenin addition, and 14.2 mM with fabF deletion, respectively. Furthermore, the non-growing cells devoid of fabF could continuously produce 3-HP up to 40.4 mM without losing its production activity for 22 h. This study demonstrates that acetate is a good substrate for 3-HP production by recombinant P. denitrificans.

Comparative Genomic Analysis Reveals the Metabolism and Evolution of the Thermophilic Archaeal Genus Metallosphaera

Members of the genus Metallosphaera are widely found in sulfur-rich and metal-laden environments, but their physiological and ecological roles remain poorly understood. Here, we sequenced Metallosphaera tengchongensis Ric-A, a strain isolated from the Tengchong hot spring in Yunnan Province, China, and performed a comparative genome analysis with other Metallosphaera genomes. The genome of M. tengchongensis had an average nucleotide identity (ANI) of approximately 70% to that of Metallosphaera cuprina. Genes sqr, tth, sir, tqo, hdr, tst, soe, and sdo associated with sulfur oxidation, and gene clusters fox and cbs involved in iron oxidation existed in all Metallosphaera genomes. However, the adenosine-5'-phosphosulfate (APS) pathway was only detected in Metallosphaera sedula and Metallosphaera yellowstonensis, and several subunits of fox cluster were lost in M. cuprina. The complete 3-hydroxypropionate/4-hydroxybutyrate cycle and dicarboxylate/4-hydroxybutyrate cycle involved in carbon fixation were found in all Metallosphaera genomes. A large number of gene family gain events occurred in M. yellowstonensis and M. sedula, whereas gene family loss events occurred frequently in M. cuprina. Pervasive strong purifying selection was found acting on the gene families of Metallosphaera, of which transcription-related genes underwent the strongest purifying selection. In contrast, genes related to prophages, transposons, and defense mechanisms were under weaker purifying pressure. Taken together, this study expands knowledge of the genomic traits of Metallosphaera species and sheds light on their evolution.

An Asymptotic Analysis of the Malonyl-CoA Route to 3-Hydroxypropionic Acid in Genetically Engineered Microbes

There has been recent interest in creating an efficient microbial production route for 3-hydroxypropionic acid, an important platform chemical. We develop and solve a mathematical model for the time-dependent metabolite concentrations in the malonyl-CoA pathway for 3-hydroxypropionic acid production in microbes, using a combination of numerical and asymptotic methods. This allows us to identify the most important targets for enzyme regulation therein under conditions of plentiful and sparse pyruvate, and to quantify their relative importance. In our model, we account for sinks of acetyl-CoA and malonyl-CoA to, for example, the citric acid cycle and fatty acid biosynthesis, respectively. Notably, in the plentiful pyruvate case we determine that there is a bifurcation in the asymptotic structure of the system, the crossing of which corresponds to a significant increase in 3-hydroxypropionic acid production. Moreover, we deduce that the most significant increases to 3-hydroxypropionic acid production can be obtained by up-regulating two specific enzymes in tandem, as the inherent nonlinearity of the system means that a solo up-regulation of either does not result in large increases in production. The types of issue arising here are prevalent in synthetic biology applications, and it is hoped that the system considered provides an instructive exemplar for broader applications.

Structural insight into bi-functional malonyl-CoA reductase

The bi-functional malonyl-CoA reductase is a key enzyme of the 3-hydroxypropionate bi-cycle for bacterial CO₂ fixation, catalysing the reduction of malonyl-CoA to malonate semialdehyde and further reduction to 3-hydroxypropionate. Here, we report the crystal structure and the full-length architecture of malonyl-CoA reductase from Porphyrobacter dokdonensis. The malonyl-CoA reductase monomer of 1230 amino acids consists of four tandemly arranged short-chain dehydrogenases/reductases, with two catalytic and two non-catalytic short-chain dehydrogenases/reductases, and forms a homodimer through paring contact of two malonyl-CoA reductase monomers. The complex structures with its cofactors and substrates revealed that the malonyl-CoA substrate site is formed by the cooperation of two short-chain dehydrogenases/reductases and one novel extra domain, while only one catalytic short-chain dehydrogenase/reductase contributes to the formation of the malonic semialdehyde-binding site. The phylogenetic and structural analyses also suggest that the bacterial bi-functional malonyl-CoA has a structural origin that is completely different from the archaeal mono-functional malonyl-CoA and malonic semialdehyde reductase, and thereby constitute an efficient enzyme.

Engineered Production of Short-Chain Acyl-Coenzyme A Esters in Saccharomyces cerevisiae

Short-chain acyl-coenzyme A esters serve as intermediate compounds in fatty acid biosynthesis, and the production of polyketides, biopolymers and other value-added chemicals. S. cerevisiae is a model organism that has been utilized for the biosynthesis of such biologically and economically valuable compounds. However, its limited repertoire of short-chain acyl-CoAs effectively prevents its application as a production host for a plethora of natural products. Therefore, we introduced biosynthetic metabolic pathways to five different acyl-CoA esters into S. cerevisiae. Our engineered strains provide the following acyl-CoAs: propionyl-CoA, methylmalonyl-CoA, n-butyryl-CoA, isovaleryl-CoA and n-hexanoyl-CoA. We established a yeast-specific metabolite extraction protocol to determine the intracellular acyl-CoA concentrations in the engineered strains. Propionyl-CoA was produced at 4-9 μM; methylmalonyl-CoA at 0.5 μM; and isovaleryl-CoA, n-butyryl-CoA, and n-hexanoyl-CoA at 6 μM each. The acyl-CoAs produced in this study are common building blocks of secondary metabolites and will enable the engineered production of a variety of natural products in S. cerevisiae. By providing this toolbox of acyl-CoA producing strains, we have laid the foundation to explore S. cerevisiae as a heterologous production host for novel secondary metabolites.

Direct Photosynthetic Production of Plastic Building Block Chemicals from CO2

Hydroxy acids have attracted attention as building block chemicals due to their roles as precursors for the production of various pharmaceuticals, vitamins, antibiotics, and flavor compounds as well as monomers for biodegradable plastic polyesters. The current approach to hydroxy acid production relies on nonrenewable fossil resources such as petroleum for raw materials, raising issues such as the rising costs of starting materials and environmental incompatibility. Recently, synthetic biology approaches based on the rational design and reconstruction of new biological systems were implemented to produce chemicals from a variety of renewable substrates. In addition to research using heterotrophic organic carbon-dependent Escherichia coli or yeasts, photosynthetic microorganisms such as cyanobacteria possessing the ability to absorb solar radiation and fix carbon dioxide (CO₂) as a sole carbon source have been engineered into a new type of microbial cell factory to directly produce hydroxy acids from CO₂. In this chapter, recent progress regarding the direct photosynthetic production of three important hydroxy acids-3-hydroxypropionate (3-HP), 3-hydroxybutyrate (3-HB), and 3-hydroxyvalerate (3-HV)-from CO₂ in cyanobacteria is summarized and discussed.

A real-time control system of gene expression using ligand-bound nucleic acid aptamer for metabolic engineering

Artificial control of bio-functions through regulating gene expression is one of the most important and attractive technologies to build novel living systems that are useful in the areas of chemical synthesis, nanotechnology, pharmacology, cell biology. Here, we present a novel real-time control system of gene regulation that includes an enhancement element by introducing duplex DNA aptamers upstream promoter and a repression element by introducing a RNA aptamer upstream ribosome binding site. With the presence of ligands corresponding to the DNA aptamers, the expression of the target gene can be potentially enhanced at the transcriptional level by strengthening the recognition capability of RNAP to the recognition region and speeding up the separation efficiency of the unwinding region due to the induced DNA bubble around the thrombin-bound aptamers; while with the presence of RNA aptamer ligand, the gene expression can be repressed at the translational level by weakening the recognition capability of ribosome to RBS due to the shielding of RBS by the formed aptamer-ligand complex upstream RBS. The effectiveness and potential utility of the developed gene regulation system were demonstrated by regulating the expression of ecaA gene in the cell-free systems. The realistic metabolic engineering application of the system has also tested by regulating the expression of mgtC gene and thrombin cDNA in Escherichia coli JD1021 for controlling metabolic flux and improving thrombin production, verifying that the real-time control system of gene regulation is able to realize the dynamic regulation of gene expression with potential applications in bacterial physiology studies and metabolic engineering.

Production of 3-hydroxypropionic acid via the malonyl-CoA pathway using recombinant fission yeast strains

3-Hydroxypropionic acid (3-HP) can be converted into derivatives such as acrylic acid, a source for producing super absorbent polymers. Although Escherichia coli has often been used for 3-HP production, it exhibits low tolerance to 3-HP. To circumvent this problem, we selected the fission yeast Schizosaccharomyces pombe as this microorganism has higher tolerance to 3-HP than E. coli. Therefore, we constructed S. pombe transformants overexpressing two genes, one encoding the S. pombe acetyl-CoA carboxylase (Cut6p) and the other encoding the malonyl-CoA reductase derived from Chloroflexus aurantiacus (CaMCR). To prevent the degradation of these expressed proteins, we employed an S. pombe protease-deficient strain. Moreover, to increase the cytosolic concentration of acetyl-CoA, we supplemented acetate to the medium, which improved 3-HP production. To further produce 3-HP by overexpressing Cut6p and CaMCR, we exploited the highly expressing S. pombe hsp9 promoter. Finally, culturing in high-density reached 3-HP production to 7.6 g/L at 31 h.

Malonyl-CoA pathway: a promising route for 3-hydroxypropionate biosynthesis

3-Hydroxypropionate (3HP) is an attractive platform chemical, serving as a precursor to a variety of commodity chemicals like acrylate and acrylamide, as well as a monomer of a biodegradable plastic. To establish a sustainable way to produce these commercially important chemicals and materials, fermentative production of 3HP is widely investigated in recent years. It is reported that 3HP can be produced from several intermediates, such as glycerol, malonyl-CoA, and β-alanine. Among all these biosynthetic routes, the malonyl-CoA pathway has some distinct advantages, including a broad feedstock spectrum, thermodynamic feasibility, and redox neutrality. To date, this pathway has been successfully constructed in various species including Escherichia coli, yeast and cyanobacteria, and optimized through carbon flux redirection, enzyme screening and engineering, and an increasing supply of energy and cofactors, resulting in significantly enhanced 3HP titer up to 40 g/L. These results show the feasibility of commercial manufacturing of 3HP and its derivatives in the future.

Synthesis of Carboxylic Acids and Esters from CO2

The achievements in the synthesis of carboxylic acids and esters from CO₂ have been summarized and discussed.

Production of acrylic acid and propionic acid by constructing a portion of the 3-hydroxypropionate/4-hydroxybutyrate cycle from Metallosphaera sedula in Escherichia coli

Acrylic acid and propionic acid are important chemicals requiring affordable, renewable production solutions. Here, we metabolically engineered Escherichia coli with genes encoding components of the 3-hydroxypropionate/4-hydroxybutyrate cycle from Metallosphaera sedula for conversion of glucose to acrylic and propionic acids. To construct an acrylic acid-producing pathway in E. coli, heterologous expression of malonyl-CoA reductase (MCR), malonate semialdehyde reductase (MSR), 3-hydroxypropionyl-CoA synthetase (3HPCS), and 3-hydroxypropionyl-CoA dehydratase (3HPCD) from M. sedula was accompanied by overexpression of succinyl-CoA synthetase (SCS) from E. coli. The engineered strain produced 13.28 ± 0.12 mg/L of acrylic acid. To construct a propionic acid-producing pathway, the same five genes were expressed, with the addition of M. sedula acryloyl-CoA reductase (ACR). The engineered strain produced 1430 ± 30 mg/L of propionic acid. This approach can be expanded to synthesize many important organic chemicals, creating new opportunities for the production of chemicals by carbon dioxide fixation.

A systems biology approach reveals major metabolic changes in the thermoacidophilic archaeon Sulfolobus solfataricus in response to the carbon source L-fucose versus D-glucose

Archaea are characterised by a complex metabolism with many unique enzymes that differ from their bacterial and eukaryotic counterparts. The thermoacidophilic archaeon Sulfolobus solfataricus is known for its metabolic versatility and is able to utilize a great variety of different carbon sources. However, the underlying degradation pathways and their regulation are often unknown. In this work, the growth on different carbon sources was analysed, using an integrated systems biology approach. The comparison of growth on L-fucose and D-glucose allows first insights into the genome-wide changes in response to the two carbon sources and revealed a new pathway for L-fucose degradation in S. solfataricus. During growth on L-fucose major changes in the central carbon metabolic network, as well as an increased activity of the glyoxylate bypass and the 3-hydroxypropionate/4-hydroxybutyrate cycle were observed. Within the newly discovered pathway for L-fucose degradation the following key reactions were identified: (i) L-fucose oxidation to L-fuconate via a dehydrogenase, (ii) dehydration to 2-keto-3-deoxy-L-fuconate via dehydratase, (iii) 2-keto-3-deoxy-L-fuconate cleavage to pyruvate and L-lactaldehyde via aldolase and (iv) L-lactaldehyde conversion to L-lactate via aldehyde dehydrogenase. This pathway as well as L-fucose transport shows interesting overlaps to the D-arabinose pathway, representing another example for pathway promiscuity in Sulfolobus species.

Reaction kinetic analysis of the 3-hydroxypropionate/4-hydroxybutyrate CO2 fixation cycle in extremely thermoacidophilic archaea

The 3-hydroxypropionate/4-hydroxybutyrate (3HP/4HB) cycle fixes CO₂ in extremely thermoacidophilic archaea and holds promise for metabolic engineering because of its thermostability and potentially rapid pathway kinetics. A reaction kinetics model was developed to examine the biological and biotechnological attributes of the 3HP/4HB cycle as it operates in Metallosphaera sedula, based on previous information as well as on kinetic parameters determined here for recombinant versions of five of the cycle enzymes (malonyl-CoA/succinyl-CoA reductase, 3-hydroxypropionyl-CoA synthetase, 3-hydroxypropionyl-CoA dehydratase, acryloyl-CoA reductase, and succinic semialdehyde reductase). The model correctly predicted previously observed features of the cycle: the 35-65% split of carbon flux through the acetyl-CoA and succinate branches, the high abundance and relative ratio of acetyl-CoA/propionyl-CoA carboxylase (ACC) and MCR, and the significance of ACC and hydroxybutyryl-CoA synthetase (HBCS) as regulated control points for the cycle. The model was then used to assess metabolic engineering strategies for incorporating CO₂ into chemical intermediates and products of biotechnological importance: acetyl-CoA, succinate, and 3-hydroxypropionate.

Application of an oxygen-inducible nar promoter system in metabolic engineering for production of biochemicals in Escherichia coli

The nar promoter, a dissolved oxygen (DO)-dependent promoter in Escherichia coli, is simply induced and functional in any cell growth phase, which are advantageous for producing biochemicals/fuels on an industrial scale. To demonstrate the feasibility of using the nar promoter in the metabolic engineering of biochemicals/biofuels in E. coli, three target pathways were examined: the d-lactate, 2,3-butandiol (2,3-BDO), and 1,3-propanediol (1,3-PDO) pathways consisting of one, three, and six genes, respectively. Each pathway gene was expressed under the control of the nar promoter. When the ldhD gene was expressed in fed-batch culture, the titer, yield, and productivity of d-lactate were 113.12 ± 2.37 g/L, 0.91 ± 0.07 g/g-glucose, and 4.19 ± 0.09 g/L/h, respectively. When three 2,3-BDO pathway genes (ilvBN, aldB, bdh1) were expressed in fed-batch culture, the titer, yield, and productivity of (R,R)-2,3-BDO were 48.0 ± 8.48 g/L, 0.43 ± 0.07 g/g glucose, and 0.76 ± 0.13 g/L/h, respectively. When six 1,3-PDO pathway genes (dhaB1B2B3, yqhD, gdrA, and gdrB) were expressed in fed-batch culture, the titer, yield, and productivity of 1,3-PDO were 15.8 ± 0.62 g/L, 0.35 ± 0.01 g/g-glycerol, and 0.25 ± 0.01 g/L/h, respectively. Based on the reasonable performance comparable to that observed in previous studies using different promoters in metabolic engineering, the nar promoter can serve as a controlled expression tool for developing a microbial system to efficiently produce biochemicals and biofuels. Biotechnol. Bioeng. 2017;114: 468-473. © 2016 Wiley Periodicals, Inc.

Ancillary contributions of heterologous biotin protein ligase and carbonic anhydrase for CO2 incorporation into 3-hydroxypropionate by metabolically engineered Pyrococcus furiosus

Acetyl-Coenzyme A carboxylase (ACC), malonyl-CoA reductase (MCR), and malonic semialdehyde reductase (MRS) convert HCO₃^- and acetyl-CoA into 3-hydroxypropionate (3HP) in the 3-hydroxypropionate/4-hydroxybutyrate carbon fixation cycle resident in the extremely thermoacidophilic archaeon Metallosphaera sedula. These three enzymes, when introduced into the hyperthermophilic archaeon Pyrococcus furiosus, enable production of 3HP from maltose and CO₂ . Sub-optimal function of ACC was hypothesized to be limiting for production of 3HP, so accessory enzymes carbonic anhydrase (CA) and biotin protein ligase (BPL) from M. sedula were produced recombinantly in Escherichia coli to assess their function. P. furiosus lacks a native, functional CA, while the M. sedula CA (Msed_0390) has a specific activity comparable to other microbial versions of this enzyme. M. sedula BPL (Msed_2010) was shown to biotinylate the β-subunit (biotin carboxyl carrier protein) of the ACC in vitro. Since the native BPLs in E. coli and P. furiosus may not adequately biotinylate the M. sedula ACC, the carboxylase was produced in P. furiosus by co-expression with the M. sedula BPL. The baseline production strain, containing only the ACC, MCR, and MSR, grown in a CO₂ -sparged bioreactor reached titers of approximately 40 mg/L 3HP. Strains in which either the CA or BPL accessory enzyme from M. sedula was added to the pathway resulted in improved titers, 120 or 370 mg/L, respectively. The addition of both M. sedula CA and BPL, however, yielded intermediate titers of 3HP (240 mg/L), indicating that the effects of CA and BPL on the engineered 3HP pathway were not additive, possible reasons for which are discussed. While further efforts to improve 3HP production by regulating gene dosage, improving carbon flux and optimizing bioreactor operation are needed, these results illustrate the ancillary benefits of accessory enzymes for incorporating CO₂ into 3HP production in metabolically engineered P. furiosus, and hint at the important role that CA and BPL likely play in the native 3HP/4HB pathway in M. sedula. Biotechnol. Bioeng. 2016;113: 2652-2660. © 2016 Wiley Periodicals, Inc.

Evaluation of 3-hydroxypropionate biosynthesis in vitro by partial introduction of the 3-hydroxypropionate/4-hydroxybutyrate cycle from Metallosphaera sedula

The chemical 3-hydroxypropionate (3HP) is an important starting reagent for the commercial synthesis of specialty chemicals. In this study, a part of the 3-hydroxypropionate/4-hydroxybutyrate cycle from Metallosphaera sedula was utilized for 3HP production. To study the basic biochemistry of this pathway, an in vitro-reconstituted system was established using acetyl-CoA as the substrate for the kinetic analysis of this system. The results indicated that 3HP formation was sensitive to acetyl-CoA carboxylase and malonyl-CoA reductase, but not malonate semialdehyde reductase. Also, the competition between 3HP formation and fatty acid production was analyzed both in vitro and in vivo. This study has highlighted how metabolic flux is controlled by different catalytic components. We believe that this reconstituted system would be valuable for understanding 3HP biosynthesis pathway and for future engineering studies to enhance 3HP production.

Structural Insights into the Tetrameric State of Aspartate-β-semialdehyde Dehydrogenases from Fungal Species

Aspartate-β-semialdehyde dehydrogenase (ASADH) catalyzes the second reaction in the aspartate pathway, a pathway required for the biosynthesis of one fifth of the essential amino acids in plants and microorganisms. Microarray analysis of a fungal pathogen T. rubrum responsible for most human dermatophytoses identified the upregulation of ASADH (trASADH) expression when the fungus is exposed to human skin, underscoring its potential as a drug target. Here we report the crystal structure of trASADH, revealing a tetrameric ASADH with a GAPDH-like fold. The tetramerization of trASADH was confirmed by sedimentation and SAXS experiments. Native PAGE demonstrated that this ASADH tetramerization is apparently universal in fungal species, unlike the functional dimer that is observed in all bacterial ASADHs. The helical subdomain in dimeric bacteria ASADH is replaced by the cover loop in archaeal/fungal ASADHs, presenting the determinant for this altered oligomerization. Mutations that disrupt the tetramerization of trASADH also abolish the catalytic activity, suggesting that the tetrameric state is required to produce the active fungal enzyme form. Our findings provide a basis to categorize ASADHs into dimeric and tetrameric enzymes, adopting a different orientation for NADP binding and offer a structural framework for designing drugs that can specifically target the fungal pathogens.

Metabolic characteristics of dominant microbes and key rare species from an acidic hot spring in Taiwan revealed by metagenomics

Background

Microbial diversity and community structures in acidic hot springs have been characterized by 16S rRNA gene-based diversity surveys. However, our understanding regarding the interactions among microbes, or between microbes and environmental factors, remains limited.

Results

In the present study, a metagenomic approach, followed by bioinformatics analyses, were used to predict interactions within the microbial ecosystem in Shi-Huang-Ping (SHP), an acidic hot spring in northern Taiwan. Characterizing environmental parameters and potential metabolic pathways highlighted the importance of carbon assimilatory pathways. Four distinct carbon assimilatory pathways were identified in five dominant genera of bacteria. Of those dominant carbon fixers, Hydrogenobaculum bacteria outcompeted other carbon assimilators and dominated the SHP, presumably due to their ability to metabolize hydrogen and to withstand an anaerobic environment with fluctuating temperatures. Furthermore, most dominant microbes were capable of metabolizing inorganic sulfur-related compounds (abundant in SHP). However, Acidithiobacillus ferrooxidans was the only species among key rare microbes with the capability to fix nitrogen, suggesting a key role in nitrogen cycling. In addition to potential metabolic interactions, based on the 16S rRNAs gene sequence of Nanoarchaeum-related and its potential host Ignicoccus-related archaea, as well as sequences of viruses and CRISPR arrays, we inferred that there were complex microbe-microbe interactions.

Conclusions

Our study provided evidence that there were numerous microbe-microbe and microbe-environment interactions within the microbial community in an acidic hot spring. We proposed that Hydrogenobaculum bacteria were the dominant microbial genus, as they were able to metabolize hydrogen, assimilate carbon and live in an anaerobic environment with fluctuating temperatures.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-2230-9) contains supplementary material, which is available to authorized users.

Production of poly(3-hydroxypropionate) and poly(3-hydroxybutyrate-co-3-hydroxypropionate) from glucose by engineering Escherichia coli

Poly(3-hydroxypropionate) (P3HP) is the strongest family member of microbial polyhydroxyalkanoates (PHA) synthesized by bacteria grown on 1,3-propandiol or glycerol. In this study synthesis pathways of P3HP and its copolymer P3HB3HP of 3-hydroxybutyrate (3HB) and 3-hydroxypropionate (3HP) were assembled respectively to allow their synthesis from glucose, a more abundant carbon source. Recombinant Escherichia coli was constructed harboring the P3HP synthetic pathway consisting of heterologous genes encoding glycerol-3-phosphate dehydrogenase (gpd1), glycerol-3-P phosphatase (gpp2) from Saccharomyces cerevisiae that catalyzes formation of glycerol from glucose, and genes coding glycerol dehydratase (dhaB123) with its reactivating factors (gdrAB) from Klebsiella pneumoniae that transfer glycerol to 3-hydroxypropionaldehyde, as well as gene encoding propionaldehyde dehydrogenase (pdup) from Salmonella typhimurium which converts 3-hydroxypropionaldehyde to 3-hydroxypropionyl-CoA, together with the gene of PHA synthase (phaC) from Ralstonia eutropha which polymerizes 3-hydroxypropionyl-CoA into P3HP. When phaA and phaB from Ralstonia eutropha respectively encoding β-ketothiolase and acetoacetate reductase, were introduced into the above P3HP producing recombinant E. coli, copolymers poly(3-hydroxybutyrate-co-3-hydroxypropionate) (P3HB3HP) were synthesized from glucose as a sole carbon source. The above E. coli recombinants grown on glucose LB medium successfully produced 5g/L cell dry weight containing 18% P3HP and 42% P(3HB-co-84mol% 3HP), respectively, in 48h shake flask studies.

Malonic semialdehyde reductase from the archaeon Nitrosopumilus maritimus is involved in the autotrophic 3-hydroxypropionate/4-hydroxybutyrate cycle

The recently described ammonia-oxidizing archaea of the phylum Thaumarchaeota are highly abundant in marine, geothermal, and terrestrial environments. All characterized representatives of this phylum are aerobic chemolithoautotrophic ammonia oxidizers assimilating inorganic carbon via a recently described thaumarchaeal version of the 3-hydroxypropionate/4-hydroxybutyrate cycle. Although some genes coding for the enzymes of this cycle have been identified in the genomes of Thaumarchaeota, many other genes of the cycle are not homologous to the characterized enzymes from other species and can therefore not be identified bioinformatically. Here we report the identification and characterization of malonic semialdehyde reductase Nmar_1110 in the cultured marine thaumarchaeon Nitrosopumilus maritimus. This enzyme, which catalyzes the reduction of malonic semialdehyde with NAD(P)H to 3-hydroxypropionate, belongs to the family of iron-containing alcohol dehydrogenases and is not homologous to malonic semialdehyde reductases from Chloroflexus aurantiacus and Metallosphaera sedula. It is highly specific to malonic semialdehyde (Km, 0.11 mM; Vmax, 86.9 μmol min(-1) mg(-1) of protein) and exhibits only low activity with succinic semialdehyde (Km, 4.26 mM; Vmax, 18.5 μmol min(-1) mg(-1) of protein). Homologues of N. maritimus malonic semialdehyde reductase can be found in the genomes of all Thaumarchaeota sequenced so far and form a well-defined cluster in the phylogenetic tree of iron-containing alcohol dehydrogenases. We conclude that malonic semialdehyde reductase can be regarded as a characteristic enzyme for the thaumarchaeal version of the 3-hydroxypropionate/4-hydroxybutyrate cycle.

Unfamiliar metabolic links in the central carbon metabolism

The central carbon metabolism of all organisms is considered to follow a well established fixed scheme. However, recent studies of autotrophic carbon fixation in prokaryotes revealed unfamiliar metabolic links. A new route interconnects acetyl-coenzyme A (CoA) via 3-hydroxypropionate with succinyl-CoA. Succinyl-CoA in turn may be metabolized via 4-hydroxybutyrate to two molecules of acetyl-CoA; a reversal of this route would result in the assimilation of two molecules of acetyl-CoA into C4 compounds. C5-dicarboxylic acids are a rather neglected class of metabolites; yet, they play a key role not only in one of the CO2 fixation cycles, but also in two acetate assimilation pathways that replace the glyoxylate cycle. C5 compounds such as ethylmalonate, methylsuccinate, methylmalate, mesaconate, itaconate and citramalate or their CoA esters are thereby linked to the acetyl-CoA, propionyl-CoA, glyoxylate and pyruvate pools. A novel carboxylase/reductase converts crotonyl-CoA into ethylmalonyl-CoA; similar reductive carboxylations apply to other alpha-beta-unsaturated carboxy-CoA thioesters. These unfamiliar metabolic links may provide useful tools for metabolic engineering.

Coupled incremental precursor and co-factor supply improves 3-hydroxypropionic acid production in Saccharomyces cerevisiae

3-Hydroxypropionic acid (3-HP) is an attractive platform chemical, which can be used to produce a variety of commodity chemicals, such as acrylic acid and acrylamide. For enabling a sustainable alternative to petrochemicals as the feedstock for these commercially important chemicals, fermentative production of 3-HP is widely investigated and is centered on bacterial systems in most cases. However, bacteria present certain drawbacks for large-scale organic acid production. In this study, we have evaluated the production of 3-HP in the budding yeast Saccharomyces cerevisiae through a route from malonyl-CoA, because this allows performing the fermentation at low pH thus making the overall process cheaper. We have further engineered the host strain by increasing availability of the precursor malonyl-CoA and by coupling the production with increased NADPH supply we were able to substantially improve 3-HP production by five-fold, up to a final titer of 463 mg l⁻¹. Our work thus led to a demonstration of 3-HP production in yeast via the malonyl-CoA pathway, and this opens for the use of yeast as a cell factory for production of bio-based 3-HP and derived acrylates in the future.

The divergence and natural selection of autocatalytic primordial metabolic systems

The diversity of the central metabolism of modern organisms is caused by the existence of a few metabolic modules, combination of which produces multiple metabolic pathways. This paper analyzes biomimetically reconstructed coupled autocatalytic cycles as the basis of ancestral metabolic systems. The mechanism for natural selection and evolution in autocatalytic chemical systems may be affected by natural homeostatic parameters such as ambient chemical potentials, temperature, and pressure. Competition between separate parts of an autocatalytic network with positive-plus-negative feedback resulted in the formation of primordial autotrophic, mixotrophic, and heterotrophic metabolic systems. This work examined the last common ancestor of a set of coupled metabolic cycles in a population of protocells. Physical-chemical properties of these cycles determined the main principles of natural selection for the ancestral Bacteria and Archaea taxa.

Exploiting microbial hyperthermophilicity to produce an industrial chemical, using hydrogen and carbon dioxide

Microorganisms can be engineered to produce useful products, including chemicals and fuels from sugars derived from renewable feedstocks, such as plant biomass. An alternative method is to use low potential reducing power from nonbiomass sources, such as hydrogen gas or electricity, to reduce carbon dioxide directly into products. This approach circumvents the overall low efficiency of photosynthesis and the production of sugar intermediates. Although significant advances have been made in manipulating microorganisms to produce useful products from organic substrates, engineering them to use carbon dioxide and hydrogen gas has not been reported. Herein, we describe a unique temperature-dependent approach that confers on a microorganism (the archaeon Pyrococcus furiosus, which grows optimally on carbohydrates at 100°C) the capacity to use carbon dioxide, a reaction that it does not accomplish naturally. This was achieved by the heterologous expression of five genes of the carbon fixation cycle of the archaeon Metallosphaera sedula, which grows autotrophically at 73°C. The engineered P. furiosus strain is able to use hydrogen gas and incorporate carbon dioxide into 3-hydroxypropionic acid, one of the top 12 industrial chemical building blocks. The reaction can be accomplished by cell-free extracts and by whole cells of the recombinant P. furiosus strain. Moreover, it is carried out some 30°C below the optimal growth temperature of the organism in conditions that support only minimal growth but maintain sufficient metabolic activity to sustain the production of 3-hydroxypropionate. The approach described here can be expanded to produce important organic chemicals, all through biological activation of carbon dioxide.

Structural basis for a bispecific NADP+ and CoA binding site in an archaeal malonyl-coenzyme A reductase

Autotrophic members of the Sulfolobales (crenarchaeota) use the 3-hydroxypropionate/4-hydroxybutyrate cycle to assimilate CO2 into cell material. The product of the initial acetyl-CoA carboxylation with CO2, malonyl-CoA, is further reduced to malonic semialdehyde by an NADPH-dependent malonyl-CoA reductase (MCR); the enzyme also catalyzes the reduction of succinyl-CoA to succinic semialdehyde onwards in the cycle. Here, we present the crystal structure of Sulfolobus tokodaii malonyl-CoA reductase in the substrate-free state and in complex with NADP(+) and CoA. Structural analysis revealed an unexpected reaction cycle in which NADP(+) and CoA successively occupy identical binding sites. Both coenzymes are pressed into an S-shaped, nearly superimposable structure imposed by a fixed and preformed binding site. The template-governed cofactor shaping implicates the same binding site for the 3'- and 2'-ribose phosphate group of CoA and NADP(+), respectively, but a different one for the common ADP part: the β-phosphate of CoA aligns with the α-phosphate of NADP(+). Evolution from an NADP(+) to a bispecific NADP(+) and CoA binding site involves many amino acid exchanges within a complex process by which constraints of the CoA structure also influence NADP(+) binding. Based on the paralogous aspartate-β-semialdehyde dehydrogenase structurally characterized with a covalent Cys-aspartyl adduct, a malonyl/succinyl group can be reliably modeled into MCR and discussed regarding its binding mode, the malonyl/succinyl specificity, and the catalyzed reaction. The modified polypeptide surrounding around the absent ammonium group in malonate/succinate compared with aspartate provides the structural basis for engineering a methylmalonyl-CoA reductase applied for biotechnical polyester building block synthesis.

Role of 4-hydroxybutyrate-CoA synthetase in the CO2 fixation cycle in thermoacidophilic archaea

Metallosphaera sedula is an extremely thermoacidophilic archaeon that grows heterotrophically on peptides and chemolithoautotrophically on hydrogen, sulfur, or reduced metals as energy sources. During autotrophic growth, carbon dioxide is incorporated into cellular carbon via the 3-hydroxypropionate/4-hydroxybutyrate cycle (3HP/4HB). To date, all of the steps in the pathway have been connected to enzymes encoded in specific genes, except for the one responsible for ligation of coenzyme A (CoA) to 4HB. Although several candidates for this step have been identified through bioinformatic analysis of the M. sedula genome, none have been shown to catalyze this biotransformation. In this report, transcriptomic analysis of cells grown under strict H(2)-CO(2) autotrophy was consistent with the involvement of Msed_0406 and Msed_0394. Recombinant versions of these enzymes catalyzed the ligation of CoA to 4HB, with similar affinities for 4HB (K(m) values of 1.9 and 1.5 mm for Msed_0406 and Msed_0394, respectively) but with different rates (1.69 and 0.22 μmol × min(-1) × mg(-1) for Msed_0406 and Msed_0394, respectively). Neither Msed_0406 nor Msed_0394 have close homologs in other Sulfolobales, although low sequence similarity is not unusual for acyl-adenylate-forming enzymes. The capacity of these two enzymes to use 4HB as a substrate may have arisen from simple modifications to acyl-adenylate-forming enzymes. For example, a single amino acid substitution (W424G) in the active site of the acetate/propionate synthetase (Msed_1353), an enzyme that is highly conserved among the Sulfolobales, changed its substrate specificity to include 4HB. The identification of the 4-HB CoA synthetase now completes the set of enzymes comprising the 3HP/4HB cycle.

Carbon dioxide fixation in 'Archaeoglobus lithotrophicus': are there multiple autotrophic pathways?

Several representatives of the euryarchaeal class Archaeoglobi are able to grow facultative autotrophically using the reductive acetyl-CoA pathway, with 'Archaeoglobus lithotrophicus' being an obligate autotroph. However, genome sequencing revealed that some species harbor genes for key enzymes of other autotrophic pathways, i.e. 4-hydroxybutyryl-CoA dehydratase of the dicarboxylate/hydroxybutyrate cycle and the hydroxypropionate/hydroxybutyrate cycle and ribulose 1,5-bisphosphate carboxylase/oxygenase (Rubisco) of the Calvin-Benson cycle. This raised the question of whether only one or multiple autotrophic pathways are operating in these species. We searched for the presence of enzyme activities specific for the dicarboxylate/hydroxybutyrate or the hydroxypropionate/hydroxybutyrate cycles in 'A. lithotrophicus', but such enzymes could not be detected. Low Rubisco activity was detected that could not account for the carbon dioxide (CO(2)) fixation rate; in addition, phosphoribulokinase activity was not found. The generation of ribulose 1,5-bisphosphate from 5-phospho-D-ribose 1-pyrophosphate was observed, but not from AMP; these sources for ribulose 1,5-bisphosphate have been proposed before. Our data indicate that the reductive acetyl-CoA pathway is the only functioning CO(2) fixation pathway in 'A. lithotrophicus'.

Beyond the Calvin cycle: autotrophic carbon fixation in the ocean

Organisms capable of autotrophic metabolism assimilate inorganic carbon into organic carbon. They form an integral part of ecosystems by making an otherwise unavailable form of carbon available to other organisms, a central component of the global carbon cycle. For many years, the doctrine prevailed that the Calvin-Benson-Bassham (CBB) cycle is the only biochemical autotrophic CO2 fixation pathway of significance in the ocean. However, ecological, biochemical, and genomic studies carried out over the last decade have not only elucidated new pathways but also shown that autotrophic carbon fixation via pathways other than the CBB cycle can be significant. This has ramifications for our understanding of the carbon cycle and energy flow in the ocean. Here, we review the recent discoveries in the field of autotrophic carbon fixation, including the biochemistry and evolution of the different pathways, as well as their ecological relevance in various oceanic ecosystems.

Identification of missing genes and enzymes for autotrophic carbon fixation in crenarchaeota

Two autotrophic carbon fixation cycles have been identified in Crenarchaeota. The dicarboxylate/4-hydroxybutyrate cycle functions in anaerobic or microaerobic autotrophic members of the Thermoproteales and Desulfurococcales. The 3-hydroxypropionate/4-hydroxybutyrate cycle occurs in aerobic autotrophic Sulfolobales; a similar cycle may operate in autotrophic aerobic marine Crenarchaeota. Both cycles form succinyl-coenzyme A (CoA) from acetyl-CoA and two molecules of inorganic carbon, but they use different means. Both cycles have in common the (re)generation of acetyl-CoA from succinyl-CoA via identical intermediates. Here, we identified several missing enzymes/genes involved in the seven-step conversion of succinyl-CoA to two molecules of acetyl-CoA in Thermoproteus neutrophilus (Thermoproteales), Ignicoccus hospitalis (Desulfurococcales), and Metallosphaera sedula (Sulfolobales). The identified enzymes/genes include succinyl-CoA reductase, succinic semialdehyde reductase, 4-hydroxybutyrate-CoA ligase, bifunctional crotonyl-CoA hydratase/(S)-3-hydroxybutyryl-CoA dehydrogenase, and beta-ketothiolase. 4-Hydroxybutyryl-CoA dehydratase, which catalyzes a mechanistically intriguing elimination of water, is well conserved and rightly can be considered the key enzyme of these two cycles. In contrast, several of the other enzymes evolved from quite different sources, making functional predictions based solely on genome interpretation difficult, if not questionable.

Design and analysis of synthetic carbon fixation pathways

Carbon fixation is the process by which CO(2) is incorporated into organic compounds. In modern agriculture in which water, light, and nutrients can be abundant, carbon fixation could become a significant growth-limiting factor. Hence, increasing the fixation rate is of major importance in the road toward sustainability in food and energy production. There have been recent attempts to improve the rate and specificity of Rubisco, the carboxylating enzyme operating in the Calvin-Benson cycle; however, they have achieved only limited success. Nature employs several alternative carbon fixation pathways, which prompted us to ask whether more efficient novel synthetic cycles could be devised. Using the entire repertoire of approximately 5,000 metabolic enzymes known to occur in nature, we computationally identified alternative carbon fixation pathways that combine existing metabolic building blocks from various organisms. We compared the natural and synthetic pathways based on physicochemical criteria that include kinetics, energetics, and topology. Our study suggests that some of the proposed synthetic pathways could have significant quantitative advantages over their natural counterparts, such as the overall kinetic rate. One such cycle, which is predicted to be two to three times faster than the Calvin-Benson cycle, employs the most effective carboxylating enzyme, phosphoenolpyruvate carboxylase, using the core of the naturally evolved C4 cycle. Although implementing such alternative cycles presents daunting challenges related to expression levels, activity, stability, localization, and regulation, we believe our findings suggest exciting avenues of exploration in the grand challenge of enhancing food and renewable fuel production via metabolic engineering and synthetic biology.