DnaA protein is required for replication of the minimal replicon of the broad-host-range plasmid RK2 in Escherichia coli

AT-rich region and repeated sequences - the essential elements of replication origins of bacterial replicons

Repeated sequences are commonly present in the sites for DNA replication initiation in bacterial, archaeal, and eukaryotic replicons. Those motifs are usually the binding places for replication initiation proteins or replication regulatory factors. In prokaryotic replication origins, the most abundant repeated sequences are DnaA boxes which are the binding sites for chromosomal replication initiation protein DnaA, iterons which bind plasmid or phage DNA replication initiators, defined motifs for site-specific DNA methylation, and 13-nucleotide-long motifs of a not too well-characterized function, which are present within a specific region of replication origin containing higher than average content of adenine and thymine residues. In this review, we specify methods allowing identification of a replication origin, basing on the localization of an AT-rich region and the arrangement of the origin's structural elements. We describe the regularity of the position and structure of the AT-rich regions in bacterial chromosomes and plasmids. The importance of 13-nucleotide-long repeats present at the AT-rich region, as well as other motifs overlapping them, was pointed out to be essential for DNA replication initiation including origin opening, helicase loading and replication complex assembly. We also summarize the role of AT-rich region repeated sequences for DNA replication regulation.

The replication origin of a repABC plasmid

Background

repABC operons are present on large, low copy-number plasmids and on some secondary chromosomes in at least 19 α-proteobacterial genera, and are responsible for the replication and segregation properties of these replicons. These operons consist, with some variations, of three genes: repA, repB, and repC. RepA and RepB are involved in plasmid partitioning and in the negative regulation of their own transcription, and RepC is the limiting factor for replication. An antisense RNA encoded between the repB-repC genes modulates repC expression.

Results

To identify the minimal region of the Rhizobium etli p42d plasmid that is capable of autonomous replication, we amplified different regions of the repABC operon using PCR and cloned the regions into a suicide vector. The resulting vectors were then introduced into R. etli strains that did or did not contain p42d. The minimal replicon consisted of a repC open reading frame under the control of a constitutive promoter with a Shine-Dalgarno sequence that we designed. A sequence analysis of repC revealed the presence of a large A+T-rich region but no iterons or DnaA boxes. Silent mutations that modified the A+T content of this region eliminated the replication capability of the plasmid. The minimal replicon could not be introduced into R. etli strain containing p42d, but similar constructs that carried repC from Sinorhizobium meliloti pSymA or the linear chromosome of Agrobacterium tumefaciens replicated in the presence or absence of p42d, indicating that RepC is an incompatibility factor. A hybrid gene construct expressing a RepC protein with the first 362 amino acid residues from p42d RepC and the last 39 amino acid residues of RepC from SymA was able to replicate in the presence of p42d.

Conclusions

RepC is the only element encoded in the repABC operon of the R. etli p42d plasmid that is necessary and sufficient for plasmid replication and is probably the initiator protein. The oriV of this plasmid resides within the repC gene and is located close to or inside of a large A+T region. RepC can act as an incompatibility factor, and the last 39 amino acid residues of the carboxy-terminal region of this protein are involved in promoting this phenotype.

Mechanisms of DNA binding and regulation of Bacillus anthracis DNA primase

DNA primases are pivotal enzymes in chromosomal DNA replication in all organisms. In this article, we report unique mechanistic characteristics of recombinant DNA primase from Bacillus anthracis. The mechanism of action of B. anthracis DNA primase (DnaG(BA)) may be described in several distinct steps as follows. Its mechanism of action is initiated when it binds to single-stranded DNA (ssDNA) in the form of a trimer. Although DnaG(BA) binds to different DNA sequences with moderate affinity (as expected of a mobile DNA binding protein), we found that DnaG(BA) bound to the origin of bacteriophage G4 (G4ori) with approximately 8-fold higher affinity. DnaG(BA) was strongly stimulated (>or=75-fold) by its cognate helicase, DnaB(BA), during RNA primer synthesis. With the G4ori ssDNA template, DnaG(BA) formed short (<or=20 nucleotides) primers in the absence of DnaB(BA). The presence of DnaB(BA) increased the rate of primer synthesis. The observed stimulation of primer synthesis by cognate DnaB(BA) is thus indicative of a positive effector role for DnaB(BA). By contrast, Escherichia coli DnaB helicase (DnaB(EC)) did not stimulate DnaG(BA) and inhibited primer synthesis to near completion. This observed effect of E. coli DnaB(EC) is indicative of a strong negative effector role for heterologous DnaB(EC). We conclude that DnaG(BA) is capable of interacting with DnaB proteins from both B. anthracis and E. coli; however, between DnaB proteins derived from these two organisms, only the homologous DNA helicase (DnaB(BA)) acted as a positive effector of primer synthesis.

Interaction of initiator proteins with the origin of replication of an IncL/M plasmid

The origin of replication of the IncL/M plasmid pMU604 was analyzed to identify sequences important for binding of initiator proteins and origin activity. A thrice repeated sequence motif 5'-NANCYGCAA-3' was identified as the binding site (RepA box) of the initiator protein, RepA. All three copies of the RepA box were required for in vivo activity and binding of RepA to these boxes appeared to be cooperative. A DnaA R box (box 1), located immediately upstream of the RepA boxes, was not required for recruitment of DnaA during initiation of replication by RepA of pMU604 unless a DnaA R box located at the distal end of the origin (box 3) had been inactivated. However, DnaA R box 1 was important for recruitment of DnaA to the origin of replication of pMU604 when the initiator RepA was that from a distantly related plasmid, pMU720. A mutation which scrambled DnaA R boxes 1 and 3 and one which scrambled DnaA R boxes 1, 3 and 4 had much more deleterious effects on initiation by RepA of pMU720 than on initiation by RepA of pMU604. Neither Rep protein could initiate replication from the origin of pMU604 in the absence of DnaA, suggesting that the difference between them might lie in the mechanism of recruitment of DnaA to this origin. DnaA protein enhanced the binding and origin unwinding activities of RepA of pMU604, but appeared unable to bind to a linear DNA fragment bearing the origin of replication of pMU604 in the absence of other proteins.

Positioning and the specific sequence of each 13-mer motif are critical for activity of the plasmid RK2 replication origin

The minimal replication origin of the broad-host-range plasmid RK2, oriV, contains five iterons which are binding sites for the plasmid-encoded replication initiation protein TrfA, four DnaA boxes, which bind the host DnaA protein, and an AT-rich region containing four 13-mer sequences. In this study, 26 mutants with altered sequence and/or spacing of 13-mer motifs have been constructed and analysed for replication activity in vivo and in vitro. The data show that the replacement of oriV 13-mers by similar but not identical 13-mer sequences from Escherichia coli oriC inactivates the origin. In addition, interchanging the positions of the oriV 13-mers results in greatly reduced activity. Mutants with T/A substitutions are also inactive. Furthermore, introduction of single-nucleotide substitutions demonstrates very restricted sequence requirements depending on the 13-mer position. Only two of the mutants are host specific, functional in Pseudomonas aeruginosa but not in E. coli. Our experiments demonstrate considerable complexity in the plasmid AT-rich region architecture required for functionality. It is evident that low internal stability of this region is not the only feature contributing to origin activity. Our studies suggest a requirement for sequence-specific protein interactions within the 13-mers during assembly of replication complexes at the plasmid origin.

Replication regions of Sinorhizobium meliloti plasmids

The replication (rep) regions of small plasmids from three Sinorhizobium meliloti strains were cloned by marker rescue. Two unique replication regions were identified, one of which was common to two different strains. Plasmid pBB83 carried a 7.2 kbp rep region from a 42 kbp plasmid, and pBB84 carried a 4.5 kbp rep region from a 36 kbp plasmid. The cloned rep regions were of different compatibility types, and were capable of displacing their parent plasmids from S. meliloti. Neither could function in a PolA- strain of Escherichia coli. The cloned replication regions were less stable in S. meliloti than their parent plasmids. The rep genes for each plasmid were localized to less than 2.5 kbp segments. Sequencing data revealed that the pBB83 Rep protein is uncommon, with partial identity to a protein encoded by a plasmid from S. meliloti GR4 [Mercado-Blanco, J., Olivares, J., 1994. The large nonsymbiotic plasmid pRmeGR4a of Rhizobium meliloti GR4 encodes a protein involved in replication that has homology with the RepC protein of Agrobacterium plasmids. Plasmid 32, 75-79]. However, the cloned DNA fragment also contains a truncated segment of the common repABC genes, suggesting that the parent plasmid contained two sets of replication genes. Other genes and an IS-element within the insert are most closely related to sequences derived from the Rhizobiaceae family, suggesting that the plasmid has a limited host range. In contrast, the pBB84 rep region contained genes similar to those associated with several broad host-range plasmids, and its Rep protein is related to that of a Pseudomonas aeruginosa broad host-range plasmid, pVS1 [Heeb, S., Itoh, Y., Nishijyo, T., Schnider, U., Keel, C., Wade, J., Walsh, U., O'Gara, F., Haas, D., 2000. Small, stable shuttle vectors based on the minimal pVS1 replicon for use in gram-negative, plant-associated bacteria. Mol. Plant-Microbe Interact. 13, 232-237]. The pBB84 rep region also includes a probable origin of replication, consisting of DNA boxes flanking a series of direct repeats and an AT-rich sequence.

Role of RepA and DnaA proteins in the opening of the origin of DNA replication of an IncB plasmid

The replication initiator protein RepA of the IncB plasmid pMU720 was shown to induce localized unwinding of its cognate origin of replication in vitro. DnaA, the initiator protein of Escherichia coli, was unable to induce localized unwinding of this origin of replication on its own but enhanced the opening generated by RepA. The opened region lies immediately downstream of the last of the three binding sites for RepA (RepA boxes) and covers one turn of DNA helix. A 6-mer sequence, 5'-TCTTAA-3', which lies within the opened region, was essential for the localized unwinding of the origin in vitro and origin activity in vivo. In addition, efficient unwinding of the origin of replication of pMU720 in vitro required the native positioning of the binding sites for the initiator proteins. Interestingly, binding of RepA to RepA box 1, which is essential for origin activity, was not required for the localized opening of the origin in vitro.

Mechanistic aspects of DnaA-RepA interaction as revealed by yeast forward and reverse two-hybrid analysis

Using yeast forward and reverse two-hybrid analysis and biochemical techniques, we present novel and definitive in vivo and in vitro evidence that both the N-terminal domain I and C-terminal domain IV of the host-encoded DnaA initiator protein of Escherichia coli interact physically with plasmid-encoded RepA initiator of pSC101. The N-terminal, but not the C-terminal, region of RepA interacted with DnaA in vitro. These protein-protein interactions are critical for two very early steps of replication initiation, namely origin unwinding and helicase loading. Neither domain I nor IV of DnaA could individually collaborate with RepA to promote pSC101 replication. However, when the two domains are co-expressed within a common cell milieu and allowed to associate non-covalently with each other via a pair of leucine zippers, replication of the plasmid was supported in vivo. Thus, the result shows that physical tethering, either non-covalent or covalent, of domain I and IV of DnaA and interaction of both domains with RepA, are critical for replication initiation. The results also provide the molecular basis for a novel, potential, replication-based bacterial two-hybrid system.

DnaA box sequences as the site for helicase delivery during plasmid RK2 replication initiation in Escherichia coli

DnaA box sequences are a common motif present within the replication origin region of a diverse group of bacteria and prokaryotic extrachromosomal genetic elements. Although the origin opening caused by binding of the host DnaA protein has been shown to be critical for the loading of the DnaB helicase, to date there has been no direct evidence presented for the formation of the DnaB complex at the DnaA box site. For these studies, we used the replication origin of plasmid RK2 (oriV), containing a cluster of four DnaA boxes that bind DnaA proteins isolated from different bacterial species (Caspi, R., Helinski, D. R., Pacek, M., and Konieczny, I. (2000) J. Biol. Chem. 275, 18454-18461). Size exclusion chromatography, surface plasmon resonance, and electron microscopy experiments demonstrated that the DnaB helicase is delivered to the DnaA box region, which is localized approximately 200 base pairs upstream from the region of origin opening and a potential site for helicase entry. The DnaABC complex was formed on both double-stranded superhelical and linear RK2 templates. A strict DnaA box sequence requirement for stable formation of that nucleoprotein structure was confirmed. In addition, our experiments provide evidence for interaction between the plasmid initiation protein TrfA and the DnaABC prepriming complex, formed at DnaA box region. This interaction is facilitated via direct contact between TrfA and DnaB proteins.

DnaA boxes in the P1 plasmid origin: the effect of their position on the directionality of replication and plasmid copy number

The DnaA protein is essential for initiation of DNA replication in a wide variety of bacterial and plasmid replicons. The replication origin in these replicons invariably contains specific binding sites for the protein, called DnaA boxes. Plasmid P1 contains a set of DnaA boxes at each end of its origin but can function with either one of the sets. Here we report that the location of origin-opening, initiation site of replication forks and directionality of replication do not change whether the boxes are present at both or at one of the ends of the origin. Replication was bidirectional in all cases. These results imply that DnaA functions similarly from the two ends of the origin. However, origins with DnaA boxes proximal to the origin-opening location opened more efficiently and maintained plasmids at higher copy numbers. Origins with the distal set were inactive unless the adjacent P1 DNA sequences beyond the boxes were included. At either end, phasing of the boxes with respect to the remainder of the origin influenced the copy number. Thus, although the boxes can be at either end, their precise context is critical for efficient origin function.

Host-dependent requirement for specific DnaA boxes for plasmid RK2 replication

The replication origin of the broad-host-range plasmid RK2, oriV, contains four DnaA boxes, which bind the DnaA protein isolated from Escherichia coli. Using a transformation assay, mutational analysis of these boxes showed a differential requirement for replication in different Gram-negative bacteria. DnaA boxes 3 and 4 were required in E. coli and Pseudomonas putidabut not as strictly in Azotobacter vinelandii and not at all in P. aeruginosa. In vitro replication results using an extract prepared from E. coli demonstrated that the activity of origin derivatives containing mutations in boxes 3 or 4 or a deletion of all four DnaA boxes could be restored by the addition of increasing amounts of purified DnaA protein. High levels of DnaA protein in the presence of the TrfA protein also resulted in the stimulation of open complex formation and DnaB helicase loading on oriV, even in the absence of the four DnaA boxes. These observations at least raise the possibility that an alternative mechanism of initiation of oriV is being used in the absence of the four DnaA boxes and that this mechanism may be similar to that used in P. aeruginosa, which does not require these four DnaA boxes for replication.

A critical DnaA box directs the cooperative binding of the Escherichia coli DnaA protein to the plasmid RK2 replication origin

The requirement of DnaA protein binding for plasmid RK2 replication initiation the Escherichia coli was investigated by constructing mutations in the plasmid replication origin that scrambled or deleted each of the four upstream DnaA boxes. Altered origins were analyzed for replication activity in vivo and in vitro and for binding to the E. coli DnaA protein using a gel mobility shift assay and DNase I footprinting. Most strikingly, a mutation in one of the boxes, box 4, abolished replication activity and eliminated stable DnaA protein binding to all four boxes. Unlike DnaA binding to the E. coli origin, oriC, DnaA binding to two of the boxes (boxes 4 and 3) in the RK2 origin, oriV, is cooperative with box 4 acting as the "organizer" for the formation of the DnaA-oriV nucleoprotein complex. Interestingly, the inversion of box 4 also abolished replication activity, but did not result in a loss of binding to the other boxes. However, DnaA binding to this mutant origin was no longer cooperative. These results demonstrate that the sequence, position, and orientation of box 4 are crucial for cooperative DnaA binding and the formation of a nucleoprotein structure that is functional for the initiation of replication.

Mechanism of recruitment of DnaB helicase to the replication origin of the plasmid pSC101

Although many bacterial chromosomes require only one replication initiator protein, e.g., DnaA, most plasmid replicons depend on dual initiators: host-encoded DnaA and plasmid-encoded Rep initiator protein for replication initiation. Using the plasmid pSC101 as a model system, this work investigates the biological rationale for the requirement for dual initiators and shows that the plasmid-encoded RepA specifically interacts with the replicative helicase DnaB. Mutations in DnaB or RepA that disrupt RepA-DnaB interaction cause failure to load DnaB to the plasmid ori in vitro and to replicate the plasmid in vivo. Although, interaction of DnaA with DnaB could not substitute for RepA-DnaB interaction for helicase loading, DnaA along with integration host factor, DnaC, and RepA was essential for helicase loading. Therefore, DnaA is indirectly needed for helicase loading. Instead of a common surface of interaction with initiator proteins, interestingly, DnaB helicase appears to have at least a limited number of nonoverlapping surfaces, each of which interacts specifically with a different initiator protein.

Mechanistic studies of initiator-initiator interaction and replication initiation

Unlike the chromosome of Escherichia coli that needs only one replication initiator protein (origin recognition protein) called DnaA, many plasmid replicons require dual initiators: host-encoded DnaA and a plasmid-encoded origin recognition protein, which is believed to be the major determinant of replication control. Hitherto, the relative mechanistic roles of dual initiators in DNA replication were unclear. Here, we present the first evidence that DnaA communicates with the plasmid-encoded pi initiator of R6K and contacts the latter at a specific N-terminal region. Without this specific contact, productive unwinding of plasmid ori gamma and replication is abrogated. The results also show that DnaA performs different roles in host and plasmid replication as revealed by the finding that the ATP-activated form of DnaA, while indispensable for oriC replication, was not required for R6K replication. We have analyzed the accessory role of the DNA bending protein, integration host factor (IHF), in promoting initiator-origin interaction and have found that IHF significantly enhances the binding of DnaA to its cognate site. Collectively, the results further advance our understanding of replication initiation.

Replication origin of the broad host range plasmid RK2. Positioning of various motifs is critical for initiation of replication

The 393-base pair minimal origin, oriV, of plasmid RK2 contains three iterated motifs essential for initiation of replication: consensus sequences for binding the bacterial DnaA protein, DnaA boxes, which have recently been shown to bind the DnaA protein; 17-base pair direct repeats, iterons, which bind the plasmid encoded replication protein, TrfA; and A + T-rich repeated sequences, 13-mers, which serve as the initial site of helix destabilization. To investigate how the organization of the RK2 origin contributes to the mechanism of replication initiation, mutations were introduced into the minimal origin which altered the sequence and/or spacing of each particular region relative to the rest of the origin. These altered origins were analyzed for replication activity in vivo and in vitro, for localized strand opening and for DnaB helicase mediated unwinding. Mutations in the region between the iterons and the 13-mers which altered the helical phase or the intrinsic DNA curvature prevented strand opening of the origin and consequently abolished replication activity. Insertions of more or less than one helical turn between the DnaA boxes and the iterons also inactivated the replication origin. In these mutants, however, strand opening appeared normal but the levels of DnaB helicase activity were substantially reduced. These results demonstrate that correct helical phasing and intrinsic DNA curvature are critical for the formation of an open complex and that the DnaA boxes must be on the correct side of the helix to load DnaB helicase.

Helicase delivery and activation by DnaA and TrfA proteins during the initiation of replication of the broad host range plasmid RK2

Specific binding of the plasmid-encoded protein, TrfA, and the Escherichia coli DnaA protein to the origin region (oriV) is required for the initiation of replication of the broad host range plasmid RK2. It has been shown that the DnaA protein which binds to DnaA boxes upstream of the TrfA-binding sites (iterons) cannot by itself form an open complex, but it enhances the formation of the open complex by TrfA (Konieczny, I., Doran, K. S., Helinski, D. R., Blasina, A. (1997) J. Biol. Chem. 272, 20173). In this study an in vitro replication system is reconstituted from purified TrfA protein and E. coli proteins. With this system, a specific interaction between the DnaA and DnaB proteins is required for delivery of the helicase to the RK2 origin region. Although the DnaA protein directs the DnaB-DnaC complex to the plasmid replication origin, it cannot by itself activate the helicase. Both DnaA and TrfA proteins are required for DnaB-induced template unwinding. We propose that specific changes in the nucleoprotein structure mediated by TrfA result in a repositioning of the DnaB helicase within the open origin region and an activation of the DnaB protein for template unwinding.

The replication initiation protein of the broad-host-range plasmid RK2 is activated by the ClpX chaperone

Initiation and control of replication of the broad-host-range plasmid RK2 requires two plasmid-encoded elements, the replication origin (oriV) and the initiation protein TrfA. Purified TrfA is largely in the form of a dimer; however, only the monomeric form of the protein can bind specifically to the direct repeats (iterons) at the RK2 origin. The largely dimeric form of wild-type TrfA is inactive in the initiation of replication of RK2 in an in vitro replication system reconstituted from purified components. However, preincubation of the TrfA protein with the ClpX molecular chaperone isolated from Escherichia coli activates the initiator protein for replication in the purified system. We further observed that ClpX, in an ATP-dependent reaction, greatly increases the proportion of TrfA monomers and, therefore, the ability of this protein to bind to iterons localized within RK2 origin. Finally, a copy-up mutant of the TrfA protein which is largely in the monomer form is active in the reconstituted in vitro replication system, and its activity is not affected by ClpX.

Role of TrfA and DnaA proteins in origin opening during initiation of DNA replication of the broad host range plasmid RK2

The Escherichia coli protein DnaA and the plasmid RK2-encoded TrfA protein are required for initiation of replication of the broad host range plasmid RK2. The TrfA protein has been shown to bind to five 17-base pair repeat sequences, referred to as iterons, at the minimal replication origin (oriV). Using DNase I footprinting and a gel mobility shift assay, purified DnaA protein was found to bind to four DnaA consensus binding sequences immediately upstream of the five iterons at the RK2 origin of replication. Binding of the TrfA protein to the iterons results in localized strand opening within the A+T-rich region of the replication origin as determined by reactivity of the top and bottom strands to potassium permanganate (KMnO4). The presence of either the E. coli DnaA or HU protein is required for the TrfA-mediated strand opening. Although the DnaA protein itself did not produce an RK2 open complex, it did enhance and/or stabilize the TrfA-induced strand opening.

Characterization of the replicon of plasmid pSW500 of Erwinia stewartii

A 1.6-kb DNA region required for the replication of pSW500 from Erwinia stewartii SW2 has been identified. DNA sequencing analysis revealed that this DNA fragment consists of a DnaA box, seven 16-bp direct repeats, and a 1005-bp open reading frame. The seven direct repeats have been demonstrated to mediate the incompatibility function of the plasmid. Primer extension analysis showed that the 1005-bp ORF is transcribed in vivo and the +1 site of the transcript is located 113 bp upstream from the translation initiation codon of the ORF. Complementation studies showed that this ORF is required for the replication of the plasmid and may encode a replication protein, RepA. Gene fusion studies revealed that the expression of repA is autoregulated by RepA. We also found that the pSW500 replicon has a copy number of approximately two and that the plasmid is stably maintained in Escherichia coli, thus demonstrating that the replicon contains all the elements required for copy number control and plasmid stability in E. coli. Curing of pSW500 from E. stewartii SW2 revealed that loss of pSW500 did not have any obvious effect on morphology or physiology of the cells, suggesting that pSW500 does not encode a function that is indispensable for the survival of the organism.

Interactions of the origin of replication (oriV) and initiation proteins (TrfA) of plasmid RK2 with submembrane domains of Escherichia coli

It has been possible to locate a submembrane domain representing less than 10% of the total membrane that appears to be responsible for sequestering some essential components required for plasmid RK2 DNA replication. This subfraction, whose cellular location in the membrane prior to extraction is still unknown, is derived from the inner membrane fraction, since it possesses enzyme marker activity (NADH oxidase) exclusively associated with the inner membrane. The subfraction was detected by a modification of the methods of Ishidate et al. (K. Ishidate, E. S. Kreeger, J. Zrike, S. Deb, B. Glauner, T. MacAlister, and L. I. Rothfield, J. Biol. Chem. 261:428-443, 1986) in which low pressure in a French pressure cell and lysozyme were used to preserve the supercoil plasmid DNA template during cell disruption. This was followed by successive cycles of sucrose gradient sedimentation and flotation density gradient centrifugation to reveal a number of subfractions, including the one of interest. The characteristics of plasmid interaction with the subfraction include the presence of supercoil DNA after extraction, the binding of the origin of plasmid replication (oriV) in vitro, and the association of the two plasmid-encoded initiation (TrfA) proteins (encoded by overlapping genes). However, another peak, the outer membrane fraction, also binds oriV in vitro, contains plasmid DNA in vivo, and associates with the TrfA initiation proteins. Nevertheless, it contains much less of the initiation proteins, and the specific activity of binding oriV is also much reduced compared with the other subfraction. There is a strong correlation between the association of the TrfA initiation proteins with a particular membrane fraction and the binding of oriV in vitro or plasmid DNA in vivo. Since the proteins are known to bind to repeated sequences in oriV (S. Perri, D. R. Helinski, and A. Toukdarian, J. Biol. Chem. 266:12536-1254, 1991; M. Pinkney, R. Diaz, E. Lanka, and C. M. Thomas, J. Mol. Biol. 203: 927-938, 1988), it appears that the initiation proteins themselves could be responsible, at least in part, for the association of plasmid DNA to the membrane.

Characterization of the basic replicon of pCM1, a narrow-host-range plasmid from the moderate halophile Chromohalobacter marismortui

The moderately halophilic bacterium Chromohalobacter marismortui contains a 17.5-kb narrow-host-range plasmid, pCM1, which shows interesting properties for the development of cloning vectors for the genetic manipulation of this important group of extremophiles. Plasmid pCM1 can stably replicate and is maintained in most gram-negative moderate halophiles tested. The replication origin has been identified and sequenced, and the minimal pCM1 replicon has been localized to a 1,600-bp region which includes two functionally discrete regions, the oriV region and the repA gene. oriV, located on a 700-bp fragment, contains four iterons 20 bp in length adjacent to a DnaA box that is dispensable but required for efficient replication of pCM1, and it requires trans-acting functions. The repA gene, which encodes a replication protein of 289 residues, is similar to the replication proteins of other gram-negative bacteria.

Regulation of cellular differentiation in Caulobacter crescentus

In Caulobacter crescentus, asymmetry is generated in the predivisional cell, resulting in the formation of two distinct cell types upon cell division: a motile swarmer cell and a sessile stalked cell. These progeny cell types differ in their relative programs of gene expression and DNA replication. In progeny swarmer cells, DNA replication is silenced for a defined period, but stalked cells reinitiate chromosomal DNA replication immediately following cell division. The establishment of these differential programs of DNA replication may be due to the polar localization of DNA replication proteins, differences in chromosome higher-order structure, or pole-specific transcription. The best-understood aspect of Caulobacter development is biogenesis of the polar flagellum. The genes encoding the flagellum are expressed under cell cycle control predominantly in the predivisional cell type. Transcription of flagellar genes is regulated by a trans-acting hierarchy that responds to both flagellar assembly and cell cycle cues. As the flagellar genes are expressed, their products are targeted to the swarmer pole of the predivisional cell, where assembly occurs. Specific protein targeting and compartmentalized transcription are two mechanisms that contribute to the positioning of flagellar gene products at the swarmer pole of the predivisional cell.

Characterization of a replicon of the moderately promiscuous plasmid, pGSH5000, with features of both the mini-replicon of pCU1 and the ori-2 of F

The dominant, polA1-independent replicon of pGSH500, rep beta (1.8 kb), consists of a cis-acting oriV region of 245 bp; a repB gene that is essential for autonomous replication and 18, 30 to 36 bp iterons which constitute the inc/cop region. The molecular organization of rep beta resembles that of mini-pCU1 (IncN). Furthermore, there is a 58% identity between the Rep proteins of these replicons. RepB also shows a 31% identity with RepE of mini-F. In addition, an 80% identity over 200 bp was identified between the cis-acting beta oriV region and the equivalent region of ori-2 (mini-F). Replicons with deletions of repB could be complemented by Rep (pCU1) and RepE (mini-F) in trans, supporting the hypothesis that rep beta is a natural hybrid between a pCU1-like and F-like replicon.

Differential binding of wild-type and a mutant RepA protein to oriR sequence suggests a model for the initiation of plasmid R1 replication

DNA replication of the enterobacterial plasmid R1 is initiated by RepA protein. We have developed a new procedure for the purification of RepA from inclusion bodies, which involves CHAPS-mediated solubilization. This method has been also used for the thermosensitive mutant protein RepA2623. The nucleoprotein complexes obtained with both proteins and oriR, the origin of replication, are studied in this paper. DNaseI and hydroxyl-radical footprinting suggest the presence in oriR of two sites with different affinity for RepA separated by eight helical turns. The pattern of hypersensitive sites in the footprints indicates that the oriR sequence, when complexed with RepA, is curved. The binding of RepA molecules to oriR is co-operative and this co-operativity is defective in the thermosensitive protein. Band-shift analysis of RepA-oriR complexes revealed the existence of a species with an anomalously high electrophoretic mobility that appears after formation of the first RepA-oriR complex and requires the sequential interaction of RepA with its two distal binding sites. These features lead us to propose that protein-protein interactions between RepA bound to both distal sites could be responsible for oriR looping. This model represents a novel mechanism that results in activation of an origin in a replicon that does not contain iterons.

Cooperativity at a distance promoted by the combined action of two replication initiator proteins and a DNA bending protein at the replication origin of pSC101

We have investigated the interaction of the host-encoded DNA bending protein IHF, the host-encoded initiator DnaA, and the plasmid-encoded initiator RepA with the replication origin of pSC101. We have discovered that DNA bending induced by IHF in vitro promoted the interaction of DnaA protein with two physically separated binding sites called dnaAs and dnaAw. This cooperative interaction at a distance, most probably, caused looping out of the ihf site. We have also discovered that RepA protein binding to its cognate sites promoted enhanced binding of DnaA protein to the physically distant dnaAs site, probably also by DNA looping. The addition of RepA to a binding reaction containing IHF and DnaA further enhanced the binding of DnaA protein to the dnaAs site. Thus, the three DNA-binding proteins interacted with the origin, generating a higher order structure in vitro. On the basis of the results of the known requirement of all three proteins for replication initiation, we have proposed a model for the structure of a preinitiation complex at the replication origin.

Iteron inhibition of plasmid RK2 replication in vitro: evidence for intermolecular coupling of replication origins as a mechanism for RK2 replication control

The broad-host-range plasmid RK2 and its derivatives are maintained in Gram-negative bacteria at a specific copy number that appears to be determined by a series of direct repeats (iterons) located at the RK2 replication origin and by the RK2 replication initiation protein. TrfA. An in vitro replication system was developed from Escherichia coli that is active with either the intact eight-iteron RK2 origin or a minimal five-iteron RK2 origin when purified TrfA protein is provided. Using this in vitro replication system, we have examined the mechanism(s) of copy-number control. It was found that two or more RK2 iterons present on a supercoiled compatible plasmid molecule are capable of specifically inhibiting in vitro the replication of either functional RK2 origin plasmid and that this inhibition is not overcome by adding increasing amounts of TrfA protein. A mutant TrfA protein, TrfA-33(cop254D), that increases the copy number of an RK2 origin in vivo exhibits replication kinetics and activity levels in this in vitro system similar to that of the wild-type protein. However, RK2 in vitro replication initiated by TrfA-33(cop254D) has a much reduced sensitivity to iteron inhibition. These data support a model for RK2 copy-number control that involves intermolecular coupling between TrfA-bound iterons.

The replication of plasmid pSC101

The origin of replication of plasmid pSC101 presents features reminiscent of those found in a number of plasmids. As for those plasmids, many details about the way it initiates its replication are beginning to be known, but the regulation of this process will not be easily understood.

IncN plasmid replicon. A deletion and subcloning analysis

A DNA segment of approximately 2000 base-pairs bounded by restriction enzyme sites for PvuII and containing the minimal replicon of an N group plasmid was characterized. A natural derivative of this miniplasmid was found to have undergone a deletion within one of two tandem iteron families, the group I iterons. Further analysis showed that all plasmid-determined functions essential for stable maintenance in Escherichia coli were localized to a contiguous region of DNA of 1019 nucleotides that excludes entirely these iterons. However, the loss of these iterons led to an increase in plasmid copy number. This indicates that members of the group I iteron-family have a role in determining plasmid copy number perhaps by titrating a plasmid-specified trans-acting product. The 2000 base-pair segment contains six open reading frames of 40 or more amino acid residues. The essential segment contains a 368 nucleotide region that must be present in cis and within which there are three "GATC" sequences and a putative Escherichia coli DnaA protein-binding sequence (dnaA box). An interesting feature is that the cis-acting region is present entirely within a presumptive rep gene. The essential segment contains four open reading frames, only one of which has an Escherichia coli canonical ribosome-binding site. The 2000 base-pair miniplasmid has two separable regions determining N group plasmid incompatibility.

Plasmid and chromosomal DNA replication and partitioning during the Caulobacter crescentus cell cycle

Cell division in Caulobacter crescentus yields a swarmer and a stalked cell. Only the stalked cell progeny is able to replicate its chromosome, and the swarmer cell progeny must differentiate into a stalked cell before it too can replicate its chromosome. In an effort to understand the mechanisms that limit chromosomal replication to the stalked cell, plasmid DNA synthesis was analyzed during the developmental cell cycle of C. crescentus, and the partitioning of both the plasmids and the chromosomes to the progeny cells was examined. Unlike the chromosome, plasmids from the incompatibility groups Q and P replicated in all C. crescentus cell types. However, all plasmids tested showed a ten- to 20-fold higher replication rate in the stalked cells than the swarmer cells. We observed that all plasmids replicated during the C. crescentus cell cycle with comparable kinetics of DNA synthesis, even though we tested plasmids that encode very different known (and putative) replication proteins. We determined the plasmid copy number in both progeny cell types, and determined that plasmids partitioned equally to the stalked and swarmer cells. We also reexamined chromosome partitioning in a recombination-deficient strain of C. crescentus, and confirmed an earlier report that chromosomes partition to the progeny stalked and swarmer cells in a random manner that does not discriminate between old and new DNA strands.

Replication of plasmids in gram-negative bacteria

Replication of plasmid deoxyribonucleic acid (DNA) is dependent on three stages: initiation, elongation, and termination. The first stage, initiation, depends on plasmid-encoded properties such as the replication origin and, in most cases, the replication initiation protein (Rep protein). In recent years the understanding of initiation and regulation of plasmid replication in Escherichia coli has increased considerably, but it is only for the ColE1-type plasmids that significant biochemical data about the initial priming reaction of DNA synthesis exist. Detailed models have been developed for the initiation and regulation of ColE1 replication. For other plasmids, such as pSC101, some hypotheses for priming mechanisms and replication initiation are presented. These hypotheses are based on experimental evidence and speculative comparisons with other systems, e.g., the chromosomal origin of E. coli. In most cases, knowledge concerning plasmid replication is limited to regulation mechanisms. These mechanisms coordinate plasmid replication to the host cell cycle, and they also seem to determine the host range of a plasmid. Most plasmids studied exhibit a narrow host range, limited to E. coli and related bacteria. In contrast, some others, such as the IncP plasmid RK2 and the IncQ plasmid RSF1010, are able to replicate in nearly all gram-negative bacteria. This broad host range may depend on the correct expression of the essential rep genes, which may be mediated by a complex regulatory mechanism (RK2) or by the use of different promoters (RSF1010). Alternatively or additionally, owing to the structure of their origin and/or to different forms of their replication initiation proteins, broad-host-range plasmids may adapt better to the host enzymes that participate in initiation. Furthermore, a broad host range can result when replication initiation is independent of host proteins, as is found in the priming reaction of RSF1010.

Replication of an RK2 miniplasmid derivative in vitro by a DNA/membrane complex extracted from Escherichia coli: involvement of the dnaA but not dnaK host proteins and association of these and plasmid-encoded proteins with the inner membrane

A DNA/membrane complex extracted from a miniplasmid derivative of the broad host range plasmid RK2 cultured in Escherichia coli capable of synthesizing new plasmid supercoiled DNA in vitro was treated with antibodies that were made against or reacted with the dnaA and dnaK host-encoded proteins, respectively. Anti-dnaA protein antibody inhibited total plasmid DNA synthesis significantly and the synthesis of supercoil plasmid DNA almost completely. In contrast, anti-dnaK protein antibody and nonimmune serum had little or no effect on total plasmid DNA synthesis. Both proteins were found to be present in the inner but not outer membrane fraction of E. coli. A variety of miniplasmid-encoded proteins which had previously been found in the DNA/membrane complex have also been localized to the inner but not outer membrane fraction. These include an essential initiation protein of 32 kDa (and an overlapping protein of 43 kDa coded for by the same gene), as well as a 30-kDa protein that may be linked to incompatibility functions. Various extraction methods were used to distinguish between the associated and the integral nature of the plasmid-encoded proteins. The results demonstrated that the essential replication proteins (32 and 43 kDa) as well as the 30-kDa protein was tightly bound to the inner membrane. Computer analysis of the amino acid sequence of the 32 (and 43)-kDa protein revealed a hydrophobic region that is only half that normally required to span the membrane. Other interactions are discussed with respect to attaching this protein to the membrane.

The effect of DnaA protein levels and the rate of initiation at oriC on transcription originating in the ftsQ and ftsA genes: in vivo experiments

The DnaA protein of Escherichia coli, essential for initiation at oriC, binds at a defined sequence which occurs at the chromosomal origin, near plasmid replication origins and in the promoters of the dnaA and mioC genes. This sequence also occurs at many other sites on the E. coli chromosome including three sites within the essential cell division genes ftsQ and A. Using an fts-lac fusion phage, lambda JFL100, we show here that fts gene expression responds both to reduced and increased intracellular levels of DnaA protein in a manner consistent with the hypothesis that DnaA protein regulates fts gene expression. Experiments using dnaC and dnaB-ts strains, however, suggest that DnaA control of fts transcription may be indirect, at least in part, with fts responding to the rate of initiation at oriC as well as to changes in DnaA protein level per se. It differs in this respect from dnaA gene expression which is unaffected when initiation of replication is inhibited by DnaB or DnaC inactivation. Strains integratively suppressed with pKN500 behave anomalously; neither fts nor dnaA transcription is significantly increased when DnaA is inactivated in these strains.

Integrative suppression of dnaA46 by broad host-range plasmid R1162

Replication of plasmid R1162 DNA does not require the product of the dnaA gene. An integrated copy of the plasmid can suppress the temperature-sensitive dnaA46 allele when (1) additional plasmid copies are present in the cytoplasm and (2) an inactive replication origin, generated by deletion, is also present in the chromosome. We propose that the inactive origin sets the rate of initiation of chromosome replication at a level compatible with cell viability, possibly by providing additional binding sites for an R1162-encoded protein that is rate-limiting for plasmid replication.

Replication of mini RK2 plasmid in extracts of Escherichia coli requires plasmid-encoded protein TrfA and host-encoded proteins DnaA, B, G DNA gyrase and DNA polymerase III

Soluble extracts of Escherichia coli capable of carrying out replication of the mini-RK2 derivative pCT461 have been prepared from cells carrying this plasmid or from plasmid-free bacteria. The latter are dependent upon exogenously added plasmid-encoded replication protein (TrfA) and require additional DnaA protein for optimum activity. This dependence upon DnaA was confirmed by the failure of DnaA-deficient cell extracts to support replication of pCT461 in the absence of added DnaA protein. Replication is unidirectional and begins at or near oriV, the vegetative replication origin of RK2. DNase I protection studies with purified TrfA indicate that this protein acts by binding to short (17 base-pairs) directly repeated DNA sequences present in oriV. The in vitro replication is resistant to rifampicin but can be abolished by antibodies against DnaG protein (E. coli primase) or DnaB protein (helicase) and by DNA gyrase inhibitors. Inhibition by arabinosyl-CTP suggests that DNA polymerase III is responsible for elongation of nascent DNA strands. These results are discussed in relation to the mechanism of RK2 replication and in the context of the host range of the plasmid.

The Agrobacterium tumefaciens virE2 gene product is a single-stranded-DNA-binding protein that associates with T-DNA

Agrobacterium tumefaciens transfers T-DNA into the plant genome by a process mediated by Ti plasmid-encoded vir genes. Cleavage at T-DNA border sequences by the VirD endonuclease generates linear, single-stranded T-DNA molecules. In the work described in this report, we used electrophoretic mobility shift assays to show that the purified virE2 gene product binds to single-stranded DNA. VirE2 protein associates with T-DNA as shown by immunoprecipitation studies with VirE2-specific antiserum. The VirE2 protein was detected primarily in the cytoplasm, but also in the inner and outer membrane and periplasmic fractions. Virulence of a virE2 mutant was restored by mixed infection with strains carrying an intact vir region, but not with virA, virB, virD, virE, or virG mutants or chvA, chvB, or exoC mutants. We propose that the VirE2 protein is involved in the processing of T-DNA and in T-strand protection during transfer to the plant cell.