Multiple and tandemly arranged promoters of the cell wall protein gene operon in Bacillus brevis 47

Available strategies for improved expression of recombinant proteins in Brevibacillus expression system: a review

Brevibacillus offers great potential as a recombinant protein expression host because of its exceptional abilities to synthesize and excrete proteins and its low extracellular protease activity. Despite these strengths, effective recombinant expression strategies are still the key to achieving high-level expression of recombinant proteins in Brevibacillus due to individual differences among strains and target proteins. Many strategies have been developed to improve recombinant protein expression in Brevibacillus. This review begins by introducing the processes used to establish and apply the Brevibacillus expression system, and then critically discusses the strategies available for improving recombinant protein expression in Brevibacillus, including optimization of the host and the expression vector, co-expression of a fusion partner or foldase, and optimization of the fermentation process. Finally, the prospects for further improvement of recombinant protein expression based on Brevibacillus are also discussed. This review is intended to provide a strategic reference for scientists wanting to improve the expression of a specific recombinant protein in Brevibacillus or other expression systems.

Direct detection of mRNA expression in microbial cells by fluorescence in situ hybridization using RNase H-assisted rolling circle amplification

Meta-analyses using next generation sequencing is a powerful strategy for studying microbiota; however, it cannot clarify the role of individual microbes within microbiota. To know which cell expresses what gene is important for elucidation of the individual cell’s function in microbiota. In this report, we developed novel fluorescence in situ hybridization (FISH) procedure using RNase-H-assisted rolling circle amplification to visualize mRNA of interest in microbial cells without reverse transcription. Our results show that this method is applicable to both Gram-negative and Gram-positive microbes without any noise from DNA, and it is possible to visualize the target mRNA expression directly at the single-cell level. Therefore, our procedure, when combined with data of meta-analyses, can help to understand the role of individual microbes in the microbiota.

Diversity in S-layers

Surface layers, referred simply as S-layers, are the two-dimensional crystalline arrays of protein or glycoprotein subunits on cell surface. They are one of the most common outermost envelope components observed in prokaryotic organisms (Archaea and Bacteria). Over the past decades, S-layers have become an issue of increasing interest due to their ubiquitousness, special features and functions. Substantial work in this field provides evidences of an enormous diversity in S-layers. This paper reviews and illustrates the diversity from several different aspects, involving the S-layer-carrying strains, the structure of S-layers, the S-layer proteins and genes, as well as the functions of S-layers.

Colonization of the Intestinal Tract of the Polyphagous Pest Spodoptera littoralis with the GFP-Tagged Indigenous Gut Bacterium Enterococcus mundtii

The alkaline gut of Lepidopterans plays a crucial role in shaping communities of bacteria. Enterococcus mundtii has emerged as one of the predominant gut microorganisms in the gastrointestinal tract of the major agricultural pest, Spodoptera littoralis. Therefore, it was selected as a model bacterium to study its adaptation to harsh alkaline gut conditions in its host insect throughout different stages of development (larvae, pupae, adults, and eggs). To date, the mechanism of bacterial survival in insects' intestinal tract has been unknown. Therefore, we have engineered a GFP-tagged species of bacteria, E. mundtii, to track how it colonizes the intestine of S. littoralis. Three promoters of different strengths were used to control the expression of GFP in E. mundtii. The promoter ermB was the most effective, exhibiting the highest GFP fluorescence intensity, and hence was chosen as our main construct. Our data show that the engineered fluorescent bacteria survived and proliferated in the intestinal tract of the insect at all life stages for up to the second generation following ingestion.

The sll1951 gene encodes the surface layer protein of Synechocystis sp. strain PCC 6803

Sll1951 is the surface layer (S-layer) protein of the cyanobacterium Synechocystis sp. strain PCC 6803. This large, hemolysin-like protein was found in the supernatant of a strain that was deficient in S-layer attachment. An sll1951 deletion mutation was introduced into Synechocystis and was easily segregated to homozygosity under laboratory conditions. By thin-section and negative-stain transmission electron microscopy, a ~30-nm-wide S-layer lattice covering the cell surface was readily visible in wild-type cells but was absent in the Δsll1951 strain. Instead, the Δsll1951 strain displayed a smooth lipopolysaccharide surface as its most peripheral layer. In the presence of chaotropic agents, the wild type released a large (>150-kDa) protein into the medium that was identified as Sll1951 by mass spectrometry of trypsin fragments; this protein was missing in the Δsll1951 strain. In addition, Sll1951 was prominent in crude extracts of the wild type, indicating that it is an abundant protein. The carotenoid composition of the cell wall fraction of the Δsll1951 strain was similar to that of the wild type, suggesting that the S-layer does not contribute to carotenoid binding. Although the photoautotrophic growth rate of the Δsll1951 strain was similar to that of the wild-type strain, the viability of the Δsll1951 strain was reduced upon exposure to lysozyme treatment and hypo-osmotic stress, indicating a contribution of the S-layer to the integrity of the Synechocystis cell wall. This work identifies the S-layer protein in Synechocystis and shows that, at least under laboratory conditions, this very abundant, large protein has a supportive but not a critical role in the function of the cyanobacterium.

Efficient production of anti-fluorescein and anti-lysozyme as single-chain anti-body fragments (scFv) by Brevibacillus expression system

Expression of scFv in Brevibacillus choshinensis was tested using combinations of three different promoters and four different secretion signals. Two model scFv constructs, i.e., His-scFvFLU and His-scFvHEL, were successfully expressed with some of the combinations. Ni Sepharose column and size exclusion chromatography resulted in fairly pure preparations of these two proteins. The purified His-scFvFLU inhibited fluorescence from fluorescein, while the purified His-scFvHEL inhibited lysozyme activity. Relatively high yield of His-scFvFLU (∼40%) and His-scFvHEL (∼30%) was achieved with the expression and purification system described here.

Development of Tools for Genetic Analysis of Phenanthrene Degradation and Nanopod Production by Delftia sp. Cs1-4

The bacterium Delftia sp. Cs1-4 produces novel extracellular structures (nanopods) in conjunction with its growth on phenanthrene. While a full genome sequence is available for strain Cs1-4, genetic tools that could be applied to study phenanthrene degradation/nanopod production have not been reported. Thus, the objectives of this study were to establish such tools, and apply them for molecular analysis of nanopod formation or phenanthrene degradation. Three types of tools were developed or validated. First, we developed a new expression system based on a strong promoter controlling expression of a surface layer protein (NpdA) from Delftia sp. Cs1-4, which was ca. 2,500-fold stronger than the widely used lactose promoter. Second, the Cre-loxP system was validated for generation of markerless, in-frame, gene deletions, and for in-frame gene insertions. The gene deletion function was applied to examine potential roles in nanopod formation of three genes (omp32, lasI, and hcp), while the gene insertion function was used for reporter gene tagging of npdA. Lastly, pMiniHimar was modified to enhance gene recovery and mutant analysis in genome-wide transposon mutagenesis. Application of the latter to strain Cs1-4, revealed several new genes with potential roles in phenanthrene degradation or npdA expression. Collectively, the availability of these tools has opened new avenues of investigation in Delftia sp. Cs1-4 and other related genera/species with importance in environmental toxicology.

A temperature-sensitive expression system based on the Geobacillus stearothermophilus NRS 2004/3a sgsE surface-layer gene promoter

The sgsE gene coding for the S-layer (surface layer) protein in the thermophilic Gram-positive bacterium Geobacillus stearothermophilus NRS 2004/3a is strongly induced when the culture is shifted from optimal (55 degrees C) to maximally tolerable growth temperature (67 degrees C). Here, we investigated the regulation of the sgsE promoter in G. stearothermophilus and tested the function of this promoter in Bacillus subtilis. We used EGFP (enhanced green fluorescent protein) reporter constructs and found that the sgsE promoter has very low basal activity at 28 degrees C, but is approx. 20-fold induced by elevated growth temperatures (37 and 45 degrees C). The promoter confers high expression levels, as EGFP mRNA levels at 45 degrees C were approx. 120-fold more abundant than mRNA levels of the cat (chloramphenicol resistance) gene, which was transcribed from a constitutive promoter on the same plasmid. In fluorescence-microscopic and Western-blot analysis, the EGFP protein was barely detectable at 28 degrees C, whereas intermediate and high levels were detected at 37 and 45 degrees C respectively. The potential to tune expression levels of genes driven by the sgsE promoter in B. subtilis by simple temperature adjustments presents a considerable potential for its future use as high-yield protein expression system for B. subtilis.

Isolation, gene structure, and comparative analysis of the S-layer gene sslA of Sporosarcina ureae ATCC 13881

The surface (S)-layer of Sporosarcina ureae strain ATCC 13881, a periodic ordered structure with p4 square type symmetry, was recently reported to be an excellent biotemplate for the formation of highly ordered metal clusters. The S-layer is formed by self-assembly of a single subunit, the 116 kDa SslA protein. Here we report on the isolation and sequence analysis of the sslA gene. The protein sequence reveals a high degree of similarity to the sequences of other S-layer proteins that form self-assembly lattices with the p4 square type symmetry, especially to those of Bacillus sphaericus. Two conserved surface layer homology (SLH) domains in the extreme aminoterminal portion are likely to mediate attachment of the protein to secondary cell wall polymers. A central HisXXXHis motif and a cysteine residue in the carboxyl-terminal part of the protein, both extremely rare in S-layer proteins, may contribute to the high affinity for metal ions. The strong bias in the codon usage may explain that heterologous expression of SslA in E. coli is not very intense. With respect to the regulatory region we notice several features that are also present in other S-layer genes. The distance between the -35/-10 region and the ATG initiation codon is unusually long, and a 41 bp palindromic sequence is present in the immediate vicinity of the -35/-10 region.

High-level production of recombinant chicken interferon-gamma by Brevibacillus choshinensis

Cytokines, such as interferon-gamma have been shown to have adjuvant and growth promoting activity in poultry and livestock and have the potential to be used as alternatives to antibiotics. We have developed an efficient system for commercial-scale synthesis of recombinant chicken interferon-gamma (ChIFN-gamma) using Brevibacillus choshinensis as the host for protein production. The ChIFN-gamma expression vector, pNCIFN, was constructed using the novel Escherichia coli-B. choshinensis shuttle vector, pNCMO2. ChIFN-gamma expression was optimized by investigating different culture conditions and different host B. choshinensis mutants. The highest level of production was observed using the B. choshinensis HPD31-MB2 strain grown at 30 degrees C, where ChIFN-gamma was produced at approximately 300-500 mg/L. ChIFN-gamma was also produced as a His-tagged fusion protein by using the pNCHis-IFN expression vector, a derivative of pNCMO2. The protein was constitutively secreted into the culture supernatant and could be partially purified in a single step using a Ni-nitrilotriacetic acid column. This recombinant His-ChIFN-gamma was shown to have the same biological activity as native ChIFN-gamma.

S-layer gene sbsC of Bacillus stearothermophilus ATCC 12980: molecular characterization and heterologous expression in Escherichia coli

The cell surface of Bacillus stearothermophilus ATCC 12980 is completely covered with an oblique S-layer lattice. To investigate sequence identities and a common structure-function relationship in S-layer proteins of different B. stearothermophilus wild-type strains, the nucleotide sequence encoding the S-layer protein SbsC of B. stearothermophilus ATCC 12980 was determined by PCR techniques. The entire sbsC sequence showed an ORF of 3297 bp predicted to encode a protein of 1099 aa with a theoretical molecular mass of 115409 Da and an isoelectric point of 5.73. Primer extension analysis suggested the existence of two promoter regions. Amino acid sequence comparison between SbsC and SbsA, a previously characterized S-layer protein of B. stearothermophilus PV72/p6 which assembles into a hexagonally ordered lattice, revealed an identical secretion signal peptide, 85% identity for the N-terminal regions (aa 31-270) which do not carry any S-layer homologous motifs, but only 21% identity for the rest of the sequences. Affinity studies demonstrated that the N-terminal part of SbsC is necessary for recognition of a secondary cell wall polymer. This was in accordance with results obtained in a previous study for SbsA, thus confirming a common functional principle for the N-terminal parts of both S-layer proteins. The sbsC coding region cloned into the pET3a vector without its own upstream region, the signal sequence and the 3' transcriptional terminator led to stable expression in Escherichia coli.

S-layer protein production by Corynebacterium strains is dependent on the carbon source

Three strains of Corynebacterium producing various amounts of PS2 S-layer protein were studied. For all strains, more PS2 was produced if the bacteria were grown in minimal medium supplemented with lactate than if they were grown in minimal medium supplemented with glucose. The consumption of substrate and PS2 production was studied in cultures with mixed carbon sources. It was found that the inhibitory effect of glucose consumption was stronger than the stimulatory effect of lactate in one strain, but not in the other two strains. The regulation of gene expression involved in S-layer formation may involve metabolic pathways, which probably differ between strains. S-layer organization was also studied by freeze-fracture electron microscopy. It was found that low levels of PS2 production correlated with the partial covering of the cell surface by a crystalline array. Finally, it was found that PS2 production was mainly regulated by changes in gene expression and that secretion was probably not a limiting step in PS2 accumulation.

Human interleukin-1 receptor antagonist: large-scale expression in Bacillus brevis 47-5Q

Interleukin-1 receptor antagonist (IL-1RA) has been used as a tool to study the biologic activity of IL-1 and as a possible therapeutic substance for inflammatory disease. To perform in vivo study, however, large quantities of IL-1RA are required. Bacillus brevis strains secrete large amounts of protein but little protease into the medium. Using B. brevis 47-5Q, we developed a large-scale expression system of human IL-1RA (HuIL-1RA). The bacteria secreted HuIL-1RA into the culture medium at very high levels, approximately 200 mg/L. The protein was isolated in one-step purification with monoclonal antibody (mAb) against HuIL-1RA. The IL-1RA molecule was determined to be functionally active by the inhibiting assay of HuIL-1-induced cell proliferation in a mouse T cell line, D10N4M.

Molecular biology of S-layers

In this chapter we report on the molecular biology of crystalline surface layers of different bacterial groups. The limited information indicates that there are many variations on a common theme. Sequence variety, antigenic diversity, gene expression, rearrangements, influence of environmental factors and applied aspects are addressed. There is considerable variety in the S-layer composition, which was elucidated by sequence analysis of the corresponding genes. In Corynebacterium glutamicum one major cell wall protein is responsible for the formation of a highly ordered, hexagonal array. In contrast, two abundant surface proteins from the S-layer of Bacillus anthracis. Each protein possesses three S-layer homology motifs and one protein could be a virulence factor. The antigenic diversity and ABC transporters are important features, which have been studied in methanogenic archaea. The expression of the S-layer components is controlled by three genes in the case of Thermus thermophilus. One has repressor activity on the S-layer gene promoter, the second codes for the S-layer protein. The rearrangement by reciprocal recombination was investigated in Campylobacter fetus. 7-8 S-layer proteins with a high degree of homology at the 5' and 3' ends were found. Environmental changes influence the surface properties of Bacillus stearothermophilus. Depending on oxygen supply, this species produces different S-layer proteins. Finally, the molecular bases for some applications are discussed. Recombinant S-layer fusion proteins have been designed for biotechnology.

In vivo expression of the Lactobacillus brevis S-layer gene

Lactobacillus brevis possesses a surface layer protein (SlpA) with tightly regulated synthesis. The slpA gene is expressed by two adjacent promoters, P1 and P2. The level of P2-derived transcripts was approximately 10 times higher than that of P1-derived transcripts throughout the entire growth of L. brevis. The half-lives of slpA transcripts were shown to be exceptionally long (14 min).

The Lactobacillus acidophilus S-layer protein gene expression site comprises two consensus promoter sequences, one of which directs transcription of stable mRNA

S-proteins are proteins which form a regular structure (S-layer) on the outside of the cell walls of many bacteria. Two S-protein-encoding genes are located in opposite directions on a 6.0-kb segment of the chromosome of Lactobacillus acidophilus ATCC 4356 bacteria. Inversion of this chromosomal segment occurs through recombination between two regions with identical sequences, thereby interchanging the expressed and the silent genes. In this study, we show that the region involved in recombination also has a function in efficient S-protein production. Two promoter sequences are present in the S-protein gene expression site, although only the most downstream promoter (P-1) is used to direct mRNA synthesis. S-protein mRNA directed by this promoter has a half-life of 15 min. Its untranslated leader can form a stable secondary structure in which the 5' end is base paired, whereas the ribosome-binding site is exposed. Truncation of this leader sequence results in a reduction in protein production, as shown by reporter gene analysis of Lactobacillus casei. The results obtained indicate that the untranslated leader sequence of S-protein mRNA is involved in efficient S-protein production.

Dynamics in oxygen-induced changes in S-layer protein synthesis from Bacillus stearothermophilus PV72 and the S-layer-deficient variant T5 in continuous culture and studies of the cell wall composition

Stable synthesis of the hexagonally ordered (p6) S-layer protein from the wild-type strain of Bacillus stearothermophilus PV72 could be achieved in continuous culture on complex medium only under oxygen-limited conditions when glucose was used as the sole carbon source. Depending on the adaptation of the wild-type strain to low oxygen supply, the dynamics in oxygen-induced changes in S-layer protein synthesis was different when the rate of aeration was increased to a level that allowed dissimilation of amino acids. If oxygen supply was increased at the beginning of continuous culture, synthesis of the p6 S-layer protein from the wild-type strain (encoded by the sbsA gene) was immediately stopped and replaced by that of a new type of S-layer protein (encoded by the sbsB gene) which assembled into an oblique (p2) lattice. In cells adapted to a prolonged low oxygen supply, first, low-level p2 S-layer protein synthesis and second, synchronous synthesis of comparable amounts of both types of S-layer proteins could be induced by stepwise increasing the rate of aeration. The time course of changes in S-layer protein synthesis was followed up by immunogold labelling of whole cells. Synthesis of the p2 S-layer protein could also be induced in the p6-deficient variant T5. Hybridization data obtained by applying the radiolabelled N-terminal and C-terminal sbsA fragments and the N-terminal sbsB fragment to the genomic DNA of all the three organisms indicated that changes in S-layer protein synthesis were accompanied by chromosomal rearrangement. Chemical analysis of peptidoglycan-containing sacculi and extraction and recrystallization experiments revealed that at least for the wild-type strain, a cell wall polymer consisting of N-acetylglucosamine and glucose is responsible for binding of the p6 S-layer protein to the rigid cell wall layer.

Development of an expression strategy using a lytic phage to trigger explosive plasmid amplification and gene expression

A novel plasmid-based expression strategy, exploiting two features of lytic bacteriophages, was developed in Lactococcus lactis. Components of this system include a phage origin of replication and phage expression signals, which were induced to high efficiency upon phage infection of the host. Phage-specific expression signals were cloned from phi 31 in a promoter-screening strategy using the lacZ gene from Streptococcus thermophilus. One clone exhibited a significant induction in beta-galactosidase production and concomitant increase in lacZ mRNA during the phi 31 infection cycle of the host. Molecular characterization of the cloned insert revealed 888 bp positioned near the phi 31 cos site. Primer extension analysis showed that transcription was induced approximately 20 min following phi 31 infection at four points, apparently organized in two sets of tandem promoters on the cloned phage insert. One of these middle phage promoters also showed a basal level of activity prior to phage infection. The phi 31 promoter lacZ cassette was cloned into a low-copy-number vector plasmid containing the phi 31 origin of replication (ori31) and the resulting low-copy-number plasmid exhibited negligible beta-galactosidase production in L. lactis. However, > 2,000 units were detected following a deliberate infection with phi 31. A control expression plasmid without ori31 could only be induced to 85 units. The combination of these phage-inducible expression signals together with ori31 functioned synergistically to drive rapid and high efficiency expression of a heterologous gene in L. lactis.

Cloning and characterization of the gene for a protein thiol-disulfide oxidoreductase in Bacillus brevis

The gene (bdb) for protein thiol-disulfide oxidoreductase cloned from Bacillus brevis was found to encode a polypeptide consisting of 117 amino acid residues with a signal peptide of 27 residues. Bdb contains a well-conserved motif, Cys-X-X-Cys, which functions as the active center of disulfide oxidoreductases such as DsbA, protein disulfide isomerase, and thioredoxin. The deduced amino acid sequence showed significant homology with those of several bacterial thioredoxins. The bdb gene complemented the Escherichia coli dsbA mutation, restoring motility by means of flagellar and alkaline phosphatase activity. The Bdb protein overproduced in B. brevis was enzymatically active in both reduction and oxidization of disulfide bonds in vitro. Immunoblotting indicated that Bdb could function at the periphery of the cell.

Characterization of the Bacillus anthracis S-layer: cloning and sequencing of the structural gene

Bacillus anthracis, a gram-positive, spore-forming bacterium, is the etiological agent of anthrax. The gene coding for the S-layer protein (sap) was cloned on two contiguous fragments in Escherichia coli, and the complete sequence of the structural gene was determined. The protein, Sap, is composed of 814 residues, including a classical prokaryotic 29-amino-acid signal peptide. The mature form has a calculated molecular mass of 83.7 kDa and a molecular mass of 94 kDa on a sodium dodecyl sulfate-polyacrylamide gel. Sap possesses many charged residues, is weakly acidic, and contains only 0.9% methionine and no cysteine residues. The N-terminal region of Sap shares sequence similarities with the Acetogenium kivui S-layer protein, the Bacillus brevis middle wall protein, the Thermotoga maritima Omp alpha protein, and the Bacillus thuringiensis S-layer protein. Electron microscopy observations showed that this S-layer is not observed on B. anthracis cells in which sap has been deleted.

In vivo transcripts of the S-layer-encoding structural gene of the archaeon Methanococcus voltae

The 5' region of the S-layer-encoding structural gene (sla) of Methanococcus voltae was sequenced. The sequence information was then used to identify the in vivo transcription products of the gene. We observed three transcripts, and upstream from each transcription start point was a region with similarity to the Box A consensus sequence observed in archaeal promoters. In two of the three cases, two Box A sequences were present in tandem. This arrangement may play a role in the high level of gene expression expected for the sla gene. Presumptive archaeal Box B signatures were also identified.

Protein secretion in Bacillus brevis

Many strains of Bacillus brevis were isolated from nature as very efficient producers of extracellular proteins. Strains identified as B. brevis including these protein-hyperproducers were reclassified into at least 6 species according to numerical analysis, DNA base composition, and DNA-DNA hybridization. We developed a host-vector system using appropriate strains of these Bacillus brevis as a host, which is excellent for the secretion of heterologous proteins. Utilizing the powerful promoters and signal peptide-coding regions of the cell wall protein gene, various expression-secretion vectors were constructed. The cell wall protein genes of these B. brevis are transcribed from multiple and tandemly arranged promoters. Transcription from P2, one of the major promoters among them, was enhanced at the early stationary phase of growth, when divalent cations in the medium was depleted and the cell wall protein layers started to be shed. Translation of the cell wall protein gene transcripts starts at the two sites located tandemly in the same reading frame. The two forms of secretory precursors, translation products from the two sites, are cleaved at the same position giving rise to the same mature proteins. The nucleotide sequence from the promoter to the translation start site is highly conserved in protein-hyperproducing B. brevis. For the efficient secretion of some heterologous proteins, protein-hypersecreting mutants had to be selected. The engineering of the signal peptide was also often necessary to obtain a good secretion of heterologous proteins.(ABSTRACT TRUNCATED AT 250 WORDS)

Transcriptional analysis of the Aeromonas salmonicida S-layer protein gene vapA

The vapA gene of Aeromonas salmonicida encodes the subunit of the surface protein array known as A-layer. Nucleotide sequence analysis of the 374 bp of DNA immediately upstream of vapA revealed two potential promoter sequences and other possible regulatory sequences. Sequencing and polymerase chain reaction analysis showed that the region was conserved in wild-type A. salmonicida. Primer extension and Northern (RNA) blot analysis showed that vapA transcription in A. salmonicida was directed predominantly by a distal promoter, P1, resulting in a 1.7-kb unit-length mRNA with an untranslated 181-nucleotide leader sequence which contained two predicted low-free-energy stem-loop structures. Northern analysis of cells grown at 15 degrees C showed that vapA transcript production peaked during the mid-log phase of growth (A600 = 0.25). At 15 degrees C, the half-life of the vapA mRNA was 22 min, while at 20 degrees C, the half-life was significantly shorter, 11 min. The amount of vapA transcript produced was reduced by growth in the presence of the DNA gyrase inhibitors nalidixic acid and novobiocin. Environmental factors such as growth temperature and atmospheric oxygen tension also affected the quantity of vapA mRNA. vapA transcript could not be detected in mutants which produced either low levels of full-length or truncated A protein or no detectable A protein.

S-layer protein of Lactobacillus acidophilus ATCC 4356: purification, expression in Escherichia coli, and nucleotide sequence of the corresponding gene

The cell surfaces of several Lactobacillus species are covered by a regular layer composed of a single species of protein, the S-protein. The 43-kDa S-protein of the neotype strain Lactobacillus acidophilus ATCC 4356, which originated from the pharynx of a human, was purified. Antibodies generated against purified S-protein were used to screen a lambda library containing chromosomal L. acidophilus ATCC 4356 DNA. Several phages showing expression of this S-protein in Escherichia coli were isolated. A 4.0-kb DNA fragment of one of those phages hybridized to a probe derived from an internal tryptic fragment of the S-protein. The slpA gene, coding for the surface layer protein, was located entirely on the 4.0-kb fragment as shown by deletion analysis. The nucleotide sequence of the slpA gene was determined and appeared to encode a protein of 444 amino acids. The first 24 amino acids resembled a putative secretion signal, giving rise to a mature S-protein of 420 amino acids (44.2 kDa). The predicted isoelectric point of 9.4 is remarkably high for an S-protein but is in agreement with the data obtained during purification. The expression of the entire S-protein or of large, C-terminally truncated S-proteins is unstable in E. coli.

Protein secretion in Bacillus species

Bacilli secrete numerous proteins into the environment. Many of the secretory proteins, their export signals, and their processing steps during secretion have been characterized in detail. In contrast, the molecular mechanisms of protein secretion have been relatively poorly characterized. However, several components of the protein secretion machinery have been identified and cloned recently, which is likely to lead to rapid expansion of the knowledge of the protein secretion mechanism in Bacillus species. Comparison of the presently known export components of Bacillus species with those of Escherichia coli suggests that the mechanism of protein translocation across the cytoplasmic membrane is conserved among gram-negative and gram-positive bacteria differences are found in steps preceding and following the translocation process. Many of the secretory proteins of bacilli are produced industrially, but several problems have been encountered in the production of Bacillus heterologous secretory proteins. In the final section we discuss these problems and point out some possibilities to overcome them.

Gene structure and expression of rice seed allergenic proteins belonging to the alpha-amylase/trypsin inhibitor family

Genomic and two novel cDNA clones for rice seed allergenic protein (RA) belonging to the alpha-amylase/trypsin inhibitor family were isolated and their nucleotide sequences determined. Ten cysteine residues deduced from nucleotide sequences were completely conserved among three cDNA clones including a clone, RA17, reported previously. One genomic clone, lambda 4, contained two RA genes, RAG1 and RAG2. Although RAG1 was cloned at the 5' portion only, two RA genes were arranged divergently. Nucleotide sequencing and DNA blotting analyses showed that RA are encoded by a multigene family consisting of at least four members. The transcriptional initiation site of RAG1 was localized at A, 26 bp upstream of the putative translational initiation codon, ATG, by the primer extension assay. The putative TATA box and CAAT box existed about 45 bp and 147 bp upstream of the transcription initiation site, respectively. A conserved sequence (ATGCAAAA) which was similar to the sequence (TGCAAAA) identified in rice glutelin promoters was observed in the 5' region of the two genes. In addition, RNA blotting analyses provided that RA genes specifically expressed in ripening seed and their transcripts accumulated maximally between 15 and 20 days after flowering.

S-layer protein gene of Lactobacillus brevis: cloning by polymerase chain reaction and determination of the nucleotide sequence

The surface (S)-layer protein of Lactobacillus brevis was isolated, purified, and characterized. The S-layer protein is the major protein of the cell, with an apparent molecular mass of 46 kDa in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Immunogold electron microscopy with polyclonal antiserum against the isolated 46-kDa protein was used to confirm the surface location of this protein. N-terminal amino acid sequences of the intact 46-kDa protein and its tryptic peptides were determined. The gene of the S-layer protein was amplified from the genome of L. brevis by polymerase chain reaction with oligonucleotides, synthesized according to the N-terminal amino acid sequences, as primers. The polymerase chain reaction fragments containing the entire S-layer gene and its regulatory regions were sequenced. Nucleic acid sequence analysis revealed one open reading frame with a capacity to encode a protein of 48,159 Da. From the regulatory region of the gene, two subsequent promoters and a ribosome binding site, showing typical features of prokaryotic consensus sequences, were found. The coding region contained a characteristic gram-positive-type signal peptide of 30 amino acids. Removal of the signal peptide results in a polypeptide of 435 amino acids, which is in excellent agreement with the size of the S-layer protein determined by SDS-PAGE. The size and the 5' end analyses of the S-layer transcripts confirmed the monocistronic nature of the S-layer operon and the functionality of the two promoters found.

Cloning, characterization, and inactivation of the Bacillus brevis lon gene

A gene of Bacillus brevis HPD31 analogous to the Escherichia coli lon gene has been cloned and characterized. The cloned gene (B. brevis lon gene) encodes a polypeptide of 779 amino acids with a molecular weight of 87,400 which resembles E. coli protease La, the lon gene product. Fifty-two percent of the amino acid residues of the two polypeptides were identical. The ATP-binding sequences found in E. coli protease La were highly conserved. The promoter of the B. brevis lon gene resembled that recognized by the major RNA polymerase of Bacillus subtilis and did not contain sequences homologous to the E. coli heat shock promoters. The B. brevis lon gene was inactivated by insertion of the neomycin resistance gene. A mutant B. brevis carrying the inactivated lon gene showed diminished ability for the degradation of abnormal polypeptides synthesized in the presence of puromycin.

Repression of the cell wall protein gene operon in Bacillus brevis 47 by magnesium and calcium ions

Transcription from P2, one of the major promoters of the cell wall protein gene operon of Bacillus brevis 47, was markedly enhanced at the early stationary phase of growth. MgCl2, when added at 1 to 5 mM to the medium, inhibited this enhancement of transcription as well as shedding of the cell wall protein layers from the cell surface. MgSO4 or CaCl2 showed an effect similar to that of MgCl2. The possible coordination of the cell wall structure with regulation of the cell wall protein genes is discussed.

Conserved structures of cell wall protein genes among protein-producing Bacillus brevis strains

Bacillus brevis HPD31 contains a surface (S)-layer protein, termed the HWP, which forms a hexagonal array in the cell wall. The 5' region of the HWP gene was isolated from a DNA library constructed in bacteriophage vector EMBL3 from a partial BamHI digest of the chromosomal DNA. The 3' region contained in a 2.7-kilobase BglII fragment of the DNA was cloned into Escherichia coli, using pUC118 as a vector. On the basis of the chemically determined N-terminal amino acid sequence, the HWP gene was found to encode a polypeptide consisting of 1,087 amino acid residues with a signal peptide of 53 or 23 amino acid residues. The deduced amino acid composition was similar to the chemical amino acid compositions of other S-layer proteins in the predominance of acidic relative to basic amino acids and in the very low content of sulfur-containing amino acids. The deduced amino acid sequence showed high homology (78%) with that of the middle wall protein of B. brevis 47. Furthermore, the multiple 5' ends of the HWP gene transcripts detected on S1 nuclease analysis closely resembled those of the middle wall protein gene transcripts. This complex structure was also conserved (greater than 85%) in the regulatory regions of two other cell wall protein genes isolated from B. brevis HPD52 and HP033, suggesting that the synthesis of the cell wall proteins is intricately regulated through a similar mechanism in protein-producing B. brevis.

Use of both translation initiation sites of the middle wall protein gene in Bacillus brevis 47

The middle wall protein gene of Bacillus brevis 47 has two potential translation initiation sites located tandemly in the same reading frame. We demonstrate here that both sites are utilized to start translation in B. brevis 47. Translation from the first site (located upstream) gives rise to a precursor of the middle wall protein with an extension peptide of 31 amino acids preceding the signal peptide. The precursor was cleaved at the same position as that of the precursor translated from the second site. The TTG codon seems to play an appreciable role in the initiation of translation in B. brevis 47.

In vitro reconstitution of a hexagonal array with a surface layer protein synthesized by Bacillus subtilis harboring the surface layer protein gene from Bacillus brevis 47

Bacillus brevis 47 contains two surface layer proteins, termed the outer wall protein and the middle wall protein (MWP), which form a hexagonal array in the cell wall. Introduction of the MWP structural gene into Bacillus subtilis by using a low-copy-number plasmid led to the synthesis of an immunoreactive polypeptide with a molecular mass almost the same as that of the MWP synthesized by B. brevis 47. Biochemical analysis indicated that most of the MWP synthesized by B. subtilis was localized in the cytoplasmic fraction. This was further confirmed by using immunogold electron microscopy. The amino-terminal amino acid sequence of the MWP purified from the cytoplasm of B. subtilis indicated that the MWP was precursor with a signal peptide of 23 amino acid residues to the amino terminus of the mature protein. The precursor of the MWP possessed the ability to reassemble in vitro on the B. brevis 47 peptidoglycan layer, resulting in the formation of almost the same hexagonal arrays as with the mature MWP purified from B. brevis 47, judging from images averaged at a resolution of about 2.5 nm. Furthermore, a center-to-center distance of the hexagonal lattice on the envelope reconstituted by using the precursor MWP was calibrated as 18.3 nm, which was almost identical to the value of 17.8 nm obtained with the mature protein.

Cloning and sequencing of the gene encoding a 125-kilodalton surface-layer protein from Bacillus sphaericus 2362 and of a related cryptic gene

Using the vector pGEM-4-blue, a 4,251-base-pair DNA fragment containing the gene for the surface (S)-layer protein of Bacillus sphaericus 2362 was cloned into Escherichia coli. Determination of the nucleotide sequence indicated an open reading frame (ORF) coding for a protein of 1,176 amino acids with a molecular size of 125 kilodaltons (kDa). A protein of this size which reacted with antibody to the 122-kDa S-layer protein of B. sphaericus was detected in cells of E. coli containing the recombinant plasmid. Analysis of the deduced amino acid sequence indicated a highly hydrophobic N-terminal region which had the characteristics of a leader peptide. The first amino acid of the N-terminal sequence of the 122-kDa S-layer protein followed the predicted cleavage site of the leader peptide in the 125-kDa protein. A sequence characteristic of promoters expressed during vegetative growth was found within a 177-base-pair region upstream from the ORF coding for the 125-kDa protein. This putative promoter may account for the expression of this gene during the vegetative growth of B. sphaericus and E. coli. The gene for the 125-kDa protein was followed by an inverted repeat characteristic of terminators. Downstream from this gene (11.2 kilobases) was an ORF coding for a putative 80-kDa protein having a high sequence similarity to the 125-kDa protein. Evidence was presented indicating that this gene is cryptic.