Electron microscopic evaluation of a two-step theory of pore formation by streptolysin O

Effects of Sugars on Giant Unilamellar Vesicle Preparation, Fusion, PCR in Liposomes, and Pore Formation

The water-in-oil emulsion transfer method was developed for preparing giant unilamellar vesicles (GUVs) and is useful for studying cellular functions under conditions that mimic cellular environments. A shortcoming of this method for encapsulating biochemical reactions is that it requires high sugar concentrations to enable the density effect to transverse the oil-water interface. In this study, we investigated the effects of sugars on GUV preparation and several biochemical reactions. We found that changing the sugar in the inner solution from sucrose to maltose or trehalose improved GUV formation. The fusion ratio of the freeze-thaw method was better in the traditional glucose-sucrose condition compared with the other examined conditions. For the inner biochemical reaction, we performed PCR in liposomes. The presence of maltose in the inner solution improved the stability of GUVs against damage caused by thermal cycles. Finally, fructose in the outer solution reduced leakage of the inner solution via pores on the membranes of GUVs. Our findings provide new insight for optimizing sugar conditions for preparing GUVs and inner GUV reactions. This could increase the utilization of GUVs as artificial cell compartment models.

PNC-27, a Chimeric p53-Penetratin Peptide Binds to HDM-2 in a p53 Peptide-like Structure, Induces Selective Membrane-Pore Formation and Leads to Cancer Cell Lysis

PNC-27, a 32-residue peptide that contains an HDM-2 binding domain and a cell-penetrating peptide (CPP) leader sequence kills cancer, but not normal, cells by binding to HDM-2 associated with the plasma membrane and induces the formation of pores causing tumor cell lysis and necrosis. Conformational energy calculations on the structure of PNC-27 bound to HDM-2 suggest that 1:1 complexes form between PNC-27 and HDM-2 with the leader sequence pointing away from the complex. Immuno-scanning electron microscopy was carried out with cancer cells treated with PNC-27 and decorated with an anti-PNC-27 antibody coupled to 6 nm gold particles and an anti-HDM-2 antibody linked to 15 nm gold particles. We found multiple 6 nm- and 15 nm-labeled gold particles in approximately 1:1 ratios in layered ring-shaped structures in the pores near the cell surface suggesting that these complexes are important to the pore structure. No pores formed in the control, PNC-27-treated untransformed fibroblasts. Based on the theoretical and immuno-EM studies, we propose that the pores are lined by PNC-27 bound to HDM-2 at the membrane surface with the PNC-27 leader sequence lining the pores or by PNC-27 bound to HDM-2.

Exchange of Proteins in Liposomes through Streptolysin O Pores

Liposomes, which are vesicles surrounded by lipid membranes, can be used as biochemical reactors by encapsulating various reactions. Accordingly, they are useful for studying cellular functions under controlled conditions that mimic the environment within a cell. However, one of the shortcomings of liposomes as biochemical reactors is the difficulty of introducing or removing proteins due to the impermeability of the membrane. In this study, we established a method for exchanging proteins in liposomes by forming reversible pores in the membrane. We used the toxic protein streptolysin O (SLO); this forms pores in membranes made of phospholipids containing cholesterol that can be closed by the addition of calcium ions. After optimizing the experimental procedure and lipid composition, we observed the exchange of fluorescent proteins (transferrin Alexa Fluor 488 and 647) in 9.9 % of liposomes. We also introduced T7 RNA polymerase, a 98-kDa enzyme, and observed RNA synthesis in ∼8 % of liposomes. Our findings establish a new method for controlling the internal protein composition of liposomes, thereby increasing their utility as bioreactors.

Crystal structure of Clostridium perfringens enterotoxin displays features of beta-pore-forming toxins

Clostridium perfringens enterotoxin (CPE) is a cause of food poisoning and is considered a pore-forming toxin, which damages target cells by disrupting the selective permeability of the plasma membrane. However, the pore-forming mechanism and the structural characteristics of the pores are not well documented. Here, we present the structure of CPE determined by x-ray crystallography at 2.0 Å. The overall structure of CPE displays an elongated shape, composed of three distinct domains, I, II, and III. Domain I corresponds to the region that was formerly referred to as C-CPE, which is responsible for binding to the specific receptor claudin. Domains II and III comprise a characteristic module, which resembles those of β-pore-forming toxins such as aerolysin, C. perfringens ε-toxin, and Laetiporus sulfureus hemolytic pore-forming lectin. The module is mainly made up of β-strands, two of which span its entire length. Domain II and domain III have three short β-strands each, by which they are distinguished. In addition, domain II has an α-helix lying on the β-strands. The sequence of amino acids composing the α-helix and preceding β-strand demonstrates an alternating pattern of hydrophobic residues that is characteristic of transmembrane domains forming β-barrel-made pores. These structural features imply that CPE is a β-pore-forming toxin. We also hypothesize that the transmembrane domain is inserted into the membrane upon the buckling of the two long β-strands spanning the module, a mechanism analogous to that of the cholesterol-dependent cytolysins.

Electrochemical characterization of pore formation by bacterial protein toxins on hybrid supported membranes

The interaction of pore-forming streptolysin O (SLO) with biomimetic lipid membranes has been studied by electrochemical methods. Phosphatidylcholine lipid vesicles were deposited onto gold electrodes modified with supporting layers of hexyl thioctate (HT) or thioctic acid tri(ethylene glycol) ester (TA-TEGE), and integrity and permeability of the resulting membranes were characterized by cyclic voltammetry and impedance spectroscopy. Both positively and negatively charged electrochemical probes, potassium ferrocyanide, hexaammineruthenium(III) chloride, and ferrocene carboxylic acid (FCA), were employed to evaluate their suitability to probe the membrane permeability properties, with FCA exhibiting ideal behavior and thus employed throughout the work. Fusion of vesicles incubated with SLO on the electrodes yielded membranes that showed a distinctive response pattern for FCA as a function of SLO concentration. A direct dependence of both the currents and peak separation of FCA in the cyclic voltammograms was observed over a concentration range of 0-10 hemolytic units (HU)/microL of the toxin. The interaction of SLO with preformed supported lipid membranes was also investigated, and much lower response was observed, suggesting a different extent of membrane-toxin interactions on such an interface. Nonionic surfactant Triton was found to disrupt the vesicle structure but could not completely remove a preformed membrane to fully restore the electrode response. The information reported here offers some unique insight into toxin-surface interactions on a hybrid membrane, facilitating the development of electrochemically based sensing platforms for detecting trace amounts of bacterial toxins via the perforation process.

Ultrastructural analysis of the membrane insertion of domain 3 of streptolysin O

Streptolysin O (SLO) is a membrane-damaging toxic protein produced by group A streptococci. We performed an ultrastructural analysis of pore formation and the mechanism of hemolysis by SLO, using a mutant form of SLO [SLO(C/A)-SS] and native SLO. SLO(C/A)-SS was unable to penetrate the erythrocyte membrane as a consequence of immobilization that was due to a disulfide bond between domains. The SLO(C/A)-SS molecules that bound to membranes formed numerous single-layered ring-shaped structures that did not result in pores on the membranes. These structures were similar to the structures formed by native SLO at 0 degrees C. After treatment with dithiothreitol, SLO(C/A)-SS that had bound to membranes formed double-layered rings with pores on the membranes, as does native SLO at room temperature. Our morphological evidence demonstrates that an increase in temperature is necessary for the occurrence of conformational changes and for the formation of double-layered rings after the insertion of domain 3 into the host cell membrane. On the basis of a model of the oligomeric structure of SLO, we propose some new details of the mechanism of hemolysis by SLO.

Characterization of pore formation by streptolysin O on supported lipid membranes by impedance spectroscopy and surface plasmon resonance spectroscopy

We report the study of the interactions of bacterial toxin streptolysin O (SLO) and cholesterol-containing membranes using electrochemical impedance and surface plasmon resonance (SPR) spectroscopy at low hemolytic units on a novel supported membrane interface. The detailed understanding of the process will aid significantly the construction of nanoscale transport channels for biosensing applications. Cholesterol-containing egg PC vesicles, pristine and incubated with SLO toxin, were fused onto a hexyl thioctate (HT)-modified gold substrate. The charge-transfer resistance of the resulting lipid membrane, which is related to the formation of the transmembrane pores, is measured with the aid of an electroactive probe. Impedance spectra were collected over a range of 0.1-100 kHz, and the obtained complex resistance was fit to an equivalent circuit. The charge-transfer resistance decreases for increasing SLO concentration, following a first-order exponential decay. The two-part membrane interface was further characterized with SPR spectroscopy. For the hexyl thioctate support layer, an equivalent monolayer thickness of 1.3 nm was determined. This value suggests a loosely packed structure of the monolayer on gold, presenting an ideal platform for permeability studies. A comparative study on the fusion behavior of vesicles with and without SLO induced pores revealed no substantial difference for the two systems, indicating that the pore formation has no adverse effect on the integrity of the vesicles. The resulting lipid membrane thickness from pre-perforated lipids was found to be 3.2 nm, suggesting that one leaflet is knocked off during the fusion process and a hybrid membrane is formed. A slightly higher thickness value of 3.4 nm was obtained for membranes from non-perforated vesicles. Deposition of lipids and subsequent incubation with SLO, as monitored by SPR, shows that the HT surface chemistry allows partial insertion of the toxin into the membrane, indicating unique properties as compared to the previously explored long-chain alkylthiols.

Characterization of micropatterned lipid membranes on a gold surface by surface plasmon resonance imaging and electrochemical signaling of a pore-forming protein

We report the fabrication and characterization of a micropatterned membrane electrode for electrochemical signaling of a bacterial pore-forming toxin, Streptolysin O (SLO) from S. pyogenes. Microcontact printing of an alkylthiol monolayer was used to fabricate an array template, onto which cholesterol-containing DMPC vesicles were fused to form lipid layer structures. The construction of the supported membranes, including pattern transfer and vesicle fusion, was characterized by in-situ surface plasmon resonance (SPR) imaging and electrochemistry. Quantitative analysis of the resulting membrane by using SPR angular shift measurements indicates that the membranes in the hydrophilic pockets have an average thickness of 8.2 +/- 0.4 nm. Together with fluorescence microscopy studies, the results suggest that this could be a mixed lipid assembly that may consist of a bilayer, vesicle fragments, and lipid junctions. The voltammetric response of the redox probe ferrocene carboxylic acid (FCA) was measured to quantify the toxin action on the supported membrane. The electrochemical measurements indicate that fusion of vesicles on the template blocked the access of FCA, whereas the injection of SLO toxin restored the redox response. The anodic peak current of FCA was found to increase with toxin concentration until a plateau was reached at 40 HU/mL. The method is highly sensitive such that 0.1 HU/mL of SLO (1.25 pM) can yield a well-defined response. In addition, it eliminates the need for a highly insulating layer in membrane sensing, which opens up new avenues in developing novel sensing interfaces for membrane-targeting proteins and peptides.

Vesicular polydiacetylene sensor for colorimetric signaling of bacterial pore-forming toxin

A vesicle-based polydiacetylene biosensor for colorimetric detection of bacterial pore-forming toxin streptolysin O (SLO) is reported. The sensor was constructed with three lipid constituents: glycine-terminated diacetylene lipid Gly-PCDA, cell membrane-mimicking component PC-DIYNE, and cholesterol (CHO), which serves as the bait molecule. UV irradiation led to photopolymerization of the diacetylene lipids that gave the material a blue appearance. Incubation of the vesicles with SLO from Streptococcus pyrogenes turned the vesicle solution red, and the color change was found to be correlated to SLO concentration. The optimal sensing performance was found with vesicles consisting of 71% Gly-PCDA, 25% CHO, and 4% PC-DIYNE, and a correlation relationship was obtained for 20 HU to 500 HU/mL, or 100 pM to 6.3 nM of SLO toxin. Transmission electron microscopy and dynamic light scattering was used for further characterization of the vesicular assemblies. Transmembrane pores (holes) with diameter around 30 nm were observed on the vesicle membranes, in particular on the peripheral of the membrane structures, suggesting pore formation by SLO toxin provides the driving force for the color change of the functional vesicles.

Molecular features of the cytolytic pore-forming bacterial protein toxins

The repertoire of the cytolytic pore-forming protein toxins (PFT) comprises 81 identified members. The essential feature of these cytolysins is their capacity to provoke the formation of hydrophilic pores in the cytoplasmic membranes of target eukaryotic cells. This process results from the binding of the proteins on the cell surface, followed by their oligomerization which leads to the insertion of the oligomers into the membrane and formation of protein-lined channels. It impairs the osmotic balance of the cell and causes cytolysis. In this review the molecular aspects of a number of important PFT and their respective encoding structural genes will be briefly described.

Sizing the holin lesion with an endolysin-beta-galactosidase fusion

Double-stranded DNA phages require two proteins for efficient host lysis: the endolysin, a muralytic enzyme, and the holin, a small membrane protein. In an event that defines the end of the vegetative cycle, the lambda holin S acts suddenly to permeabilize the membrane. This permeabilization enables the R endolysin to attack the cell wall, after which cell lysis occurs within seconds. A C-terminal fusion of the R endolysin with full-length beta-galactosidase (beta-Gal) was tested for lytic competence in the context of the late-gene expression system of an induced lambda lysogen. Under these conditions, the hybrid R-beta-Gal product, an active tetrameric beta-Gal greater than 480 kDa in mass, was fully functional in lysis mediated by the S holin. Western blot analysis demonstrated that the lytic competence was not due to the proteolytic release of the endolysin domain of the R-beta-Gal fusion protein. The ability of this massive complex to be released by the S holin suggests that S causes a generalized membrane disruption rather than a regular oligomeric membrane pore. Similar results were obtained with an early lysis variant of the S holin and also in parallel experiments with the T4 holin, T, in an identical lambda context. However, premature holin lesions triggered by depolarization of the membrane were nonpermissive for the hybrid endolysin, indicating that these premature lesions constituted less-profound damage to the membrane. Finally, a truncated T holin functional in lysis with the endolysin is completely incompetent for lysis with the hybrid endolysin. A model for the formation of the membrane lesion within homo-oligomeric rafts of holin proteins is discussed.

Surface-bound lipid vesicles encapsulating redox species for amperometric biosensing of pore-forming bacterial toxins

A new method is described to signal the presence of a staphylococcal toxin (streptolysin, SLO) by a membrane-based biosensor fabricated with bilayer vesicles of phosphatidylcholine lipids and cholesterol on a gold electrode. The controlled release of encapsulated redox species from the surface-bound vesicles is mediated by the pore-formation functionality of SLO, allowing amperometric detection of the targeted toxin. Effects of BSA and Triton-100 on membrane permeability and redox release have been assessed, and a thin layer electrolysis mechanism has been proposed to account for the observed voltammetric behavior. The method is applicable to the detection of functionally similar protein toxins.

Protein kinase A phosphorylation of the ryanodine receptor does not affect calcium sparks in mouse ventricular myocytes

Ryanodine receptor (RyR) phosphorylation by protein kinase A (PKA) may be important in modulating resting sarcoplasmic reticulum (SR) Ca2+ release, especially in heart failure. However, clear cellular data on PKA-dependent modulation of cardiac RyRs is limited because of difficulty in distinguishing between PKA effects on RyR, phospholamban (PLB), and Ca2+ current. To clarify this, we measured resting Ca2+ sparks in streptolysin-O permeabilized ventricular myocytes from wild-type (WT) and PLB knockout (PLB-KO) mice and transgenic mice expressing only double-mutant PLB (PLB-DM) that lacks the regulatory phosphorylation sites (S16A/T17A). In WT myocytes, cAMP dramatically increased Ca2+ spark frequency (CaSpF) by 2- and 3-fold when [Ca2+] was clamped at 50 and 10 nmol/L (and the SR Ca2+ content also rose by 40% and 50%). However, in PLB-KO and PLB-DM, neither CaSpF nor SR Ca2+ load was changed by the addition of 10 micromol/L cAMP (even with phosphatase inhibition). PKA activation also increased Ca2+ spark amplitude, duration, and width in WT, but not in PLB-KO or PLB-DM. RyR phosphorylation was confirmed by measurements of 32P incorporation on immunoprecipitated RyR. In intact resting myocytes, PKA activation increased CaSpF 2.8-fold in WT, but not in PLB-KO, confirming results in permeabilized myocytes. We conclude that the PKA-dependent increase in myocyte CaSpF and size is entirely attributable to PLB phosphorylation and consequent enhanced SR Ca2+ load. PKA does not seem to have any appreciable effect on resting RyR function in these ventricular myocytes. Moreover, the data provide compelling evidence that elevated intra-SR [Ca2+] increases RyR gating independent of cytosolic [Ca2+] (which was clamped).

The cholesterol-dependent cytolysins

In view of the recent studies on the CDCs, a reasonable schematic of the stages leading to membrane insertion of the CDCs can be assembled. As shown in Fig. 3, we propose that the CDC first binds to the membrane as a monomer. These monomers then diffuse laterally on the membrane surface to encounter other monomers or incomplete oligomeric complexes. Presumably, once the requisite oligomer size is reached, the prepore complex is converted into the pore complex and a large membrane channel is formed. During the conversion of the prepore complex to the pore complex, we predict that the TMHs of the subunits in the prepore complex insert into the bilayer in a concerted fashion to form the large transmembrane beta-barrel, although this still remains to be confirmed experimentally. Many intriguing problems concerning the cytolytic mechanism of the CDCs remain unsolved. The nature of the initial interaction of the CDC monomer with the membrane is currently one of the most controversial questions concerning the CDC mechanism. Is cholesterol involved in this interaction, as previously assumed, or do specific receptors exist for these toxins that remain to be discovered? Also, the trigger for membrane insertion and the regions of these toxins that facilitate the [figure: see text] interaction of the monomers during prepore complex formation are unknown. In addition, the temporal sequence of the multiple structural changes that accompany the conversion of the soluble CDC monomer into a membrane-inserted oligomer have yet to be defined or characterized kinetically.

Effect of streptolysin O on the microelasticity of human platelets analyzed by atomic force microscopy

Atomic force microscopy (AFM) has been shown to be a suitable tool to probe biophysical properties of cells and cell fragments. We analysed biophysical alterations of human platelets by AFM using streptolysin O (SLO) as a model for pore forming proteins. Permeabilization of platelet membrane by SLO was confirmed by transmission electron and confocal microscopy. Using force volume imaging combined with FIEL analysis we were able to show dynamically the increase in the elasticity of platelets during the pore formation by SLO and could correlate the viscoelasticity to the morphology of platelets. Stabilizing the actin cytoskeleton by phalloidin resulted in partial restoration of the elasticity indicating that loss of stability in platelets by SLO is mediated by alterations of both plasma membrane and cytoskeleton.

Cholesterol-Streptolysin O Interaction: An EM Study of Wild-Type and Mutant Streptolysin O

We present transmission electron microscopical data from negatively stained specimens of cholesterol following interaction with the thiol-activated bacterial toxin streptolysin O (SLO) (wild-type and a number of cysteine substitution mutants), with and without chemical modification of the cysteine residues. Two experimental systems were used, one with an aqueous suspension of cholesterol microcrystals and the other with immobilized thin planar cholesterol crystals attached to a carbon film. In both systems the wild-type SLO and two cytolytically active mutants, Cys 530 --> Ala (C530A) and Ser 101 --> Cys (S101C), readily generated the characteristic SLO arc- and ring-like oligomers on the surface of cholesterol microcrystals and immobilized planar cholesterol crystals. An underlying array of bound toxin can sometimes be detected. In the presence of high concentrations of SLO monomer, extensive sheet-like networks of linked oligomers extend from the microcrystals. The SLO mutant Thr250 --> Cys (T250C), which also possesses a relatively high cytolytic activity, has been found to create ring-like toxin oligomers somewhat more slowly than wild-type SLO, but the linear monomolecular layer array of cholesterol-bound toxin is more readily detected. With mutant Asn402 --> Cys (N402C), which has approximately 10% cytolytic activity compared to wild-type SLO, the formation of ring-like oligomers is markedly reduced, with incomplete arcs and the parallel arrays predominating. Chemical modification of the functional cysteine groups of SLO mutants T250C and N402C completely inhibits the formation of toxin oligomers, but does not prevent the ability of these mutants to bind to cholesterol as a linear array. Such chemical modification is also known to abolish hemolysis/cytolysis. For both mutant T250C and N402C the parallel array of bound SLO adopts an orientation that appears to be determined by the underlying lattice of the crystalline cholesterol. The cholesterol-binding of biotinylated SLO mutant N402C was confirmed by labeling in suspension with 5-nm streptavidin-conjugated colloidal gold particles. Removal of the maltose-binding protein from the SLO fusion products increases the order of the monolayer array of biotinylated SLO bound to cholesterol crystals. Overall, our data support the concept that there is sterospecific binding of the SLO monomer to crystalline cholesterol bilayers, prior to oligomer formation. With the mutants tested, cysteine modification does not prevent binding to cholesterol, but subsequent release and oligomer formation are blocked. Copyright 1998 Academic Press.

Ca2+ and protein kinase C activation of mucin granule exocytosis in permeabilized SPOC1 cells

Mucin secretion by airway goblet cells is under the control of apical P2Y2, phospholipase C-coupled purinergic receptors. In SPOC1 cells, the mobilization of intracellular Ca2+ by ionomycin or the activation of protein kinase C (PKC) by phorbol 12-myristate 13-acetate (PMA) stimulates mucin secretion in a fully additive fashion [L. H. Abdullah, J. D. Conway, J. A. Cohn, and C. W. Davis. Am. J. Physiol. 273 (Lung Cell. Mol. Physiol. 17): L201-L210, 1997]. This apparent independence between PKC and Ca2+ in the stimulation of mucin secretion was tested in streptolysin O-permeabilized SPOC1 cells. These cells were fully competent to secrete mucin when Ca2+ was elevated from 100 nM to 3.1 microM for 2 min following permeabilization; the Ca2+ EC50 was 2.29 +/- 0.07 microM. Permeabilized SPOC1 cells were exposed to PMA or 4alpha-phorbol at Ca2+ activities ranging from 10 nM to 10 microM. PMA, but not 4alpha-phorbol, increased mucin release at all Ca2+ activities tested: at 10 nM Ca2+ mucin release was 2.1-fold greater than control and at 4.7 microM Ca2+ mucin release was maximal (3.6-fold increase). PMA stimulated 27% more mucin release at 4.7 microM than at 10 nM Ca2+. Hence, SPOC1 cells possess Ca2+-insensitive, PKC-dependent, and Ca2+-dependent PKC-potentiated pathways for mucin granule exocytosis.

Formation of ring-shaped structures on erythrocyte membranes after treatment with botulinolysin, a thiol-activated hemolysin from Clostridium botulinum

Damage to erythrocyte membranes by botulinolysin (BLY) was studied by electron microscopy, which revealed ring-shaped structures with inner diameters and widths of approximately 32 and 6.7 nm, respectively. BLY bound to membranes at 0 degrees C, but subsequent treatment with glutaraldehyde prevented ring formation during further incubation at 37 degrees C. Zn2+ ions inhibited ring formation but not binding of BLY to membranes.