Detection and differentiation of in vitro-spiked bacteria by real-time PCR and melting-curve analysis

Preanalytical conditions can interfere with M. tuberculosis detection by PCR in respiratory samples

OBJECTIVES

Tuberculosis is one of the most prevalent infections in humans. Although culture is the reference for diagnosis, its sensitivity is compromised, especially in paucibacillary samples. Because polymerase chain reaction (PCR) amplifies mycobacterial DNA, it is more sensitive than culture for the diagnosis of Mycobacterium tuberculosis (Mtb). However, its performance can be affected by intrinsic sample inhibitors and by the extraction/detection techniques used.

METHODS

We evaluated the influence of preanalytical conditions on Mtb detection in samples of sputum (SPU), bronchoalveolar lavage (BAL), and pleural fluid (PF) using combinations of extraction/detection methods. Respiratory samples were prepared to contain different concentrations of red blood cells and nucleated cells to which increasing amounts of Mtb colonies were inoculated and submitted to PCR.

RESULTS

Up to 102 CFU/ml of Mtb were detected in the SPU in all methods, except for the Roche extraction/detection method, regardless of the preanalytical sample condition. In BAL samples, medium and high concentrations of cells and high concentrations of red blood cells contributed to a lower Mtb detection, regardless of the extraction method used. In PF, red blood cells were the variable that most interfered with Mtb detection, with better recovery (102 CFU/ml) observed with the Qiagen/Nanogen combination.

CONCLUSION

The choice of Mtb extraction and detection method is of fundamental importance for PCR analytical sensitivity, especially when paucibacillary samples and/or samples containing potential PCR inhibitors are analyzed.

Clinical Relevance of Pathogens Detected by Multiplex PCR in Blood of Very-Low-Birth Weight Infants with Suspected Sepsis - Multicentre Study of the German Neonatal Network

Introduction

In the German Neonatal Network (GNN) 10% of very-low-birth weight infants (VLBWI) suffer from blood-culture confirmed sepsis, while 30% of VLBWI develop clinical sepsis. Diagnosis of sepsis is a difficult task leading to potential over-treatment with antibiotics. This study aims to investigate whether the results of blood multiplex-PCR (SeptiFast^®) for common sepsis pathogens are relevant for clinical decision making when sepsis is suspected in VLBWI.

Methods

We performed a prospective, multi-centre study within the GNN including 133 VLBWI with 214 episodes of suspected late onset sepsis (LOS). In patients with suspected sepsis a multiplex-PCR (LightCycler SeptiFast MGRADE-test^®) was performed from 100 μl EDTA blood in addition to center-specific laboratory biomarkers. The attending neonatologist documented whether the PCR-result, which was available after 24 to 48 hrs, had an impact on the choice of antibiotic drugs and duration of therapy.

Results

PCR was positive in 110/214 episodes (51%) and blood culture (BC) was positive in 55 episodes (26%). Both methods yielded predominantly coagulase-negative staphylococci (CoNS) followed by Escherichia coli and Staphylococcus aureus. In 214 BC—PCR paired samples concordant results were documented in 126 episodes (59%; n = 32 were concordant pathogen positive results, n = 94 were negative in both methods). In 65 episodes (30%) we found positive PCR results but negative BCs, with CoNS being identified in 43 (66%) of these samples. Multiplex-PCR results influenced clinical decision making in 30% of episodes, specifically in 18% for the choice of antimicrobial therapy and in 22% for the duration of antimicrobial therapy.

Conclusions

Multiplex-PCR results had a moderate impact on clinical management in about one third of LOS-episodes. The main advantage of multiplex-PCR was the rapid detection of pathogens from micro-volume blood samples. In VLBWI limitations include risk of contamination, lack of resistance testing and high costs. The high rate of positive PCR results in episodes of negative BC might lead to overtreatment of infants which is associated with risk of mortality, antibiotic resistance, fungal sepsis and NEC.

Usefulness of Multiplex Real-Time PCR for Simultaneous Pathogen Detection and Resistance Profiling of Staphylococcal Bacteremia

Staphylococci are the leading cause of nosocomial blood stream infections. Fast and accurate identification of staphylococci and confirmation of their methicillin resistance are crucial for immediate treatment with effective antibiotics. A multiplex real-time PCR assay that targets mecA, femA specific for S. aureus, femA specific for S. epidermidis, 16S rRNA for universal bacteria, and 16S rRNA specific for staphylococci was developed and evaluated with 290 clinical blood culture samples containing Gram-positive cocci in clusters (GPCC). For the 262 blood cultures identified to the species level with the MicroScan WalkAway system (Siemens Healthcare Diagnostics, USA), the direct real-time PCR assay of positive blood cultures showed very good agreement for the categorization of staphylococci into methicillin-resistant S. aureus (MRSA), methicillin-susceptible S. aureus (MSSA), methicillin-resistant S. epidermidis (MRSE), methicillin-susceptible S. epidermidis (MSSE), methicillin-resistant non-S. epidermidis CoNS (MRCoNS), and methicillin-susceptible non-S. epidermidis CoNS (MSCoNS) (κ = 0.9313). The direct multiplex real-time PCR assay of positive blood cultures containing GPCC can provide essential information at the critical point of infection with a turnaround time of no more than 4 h. Further studies should evaluate the clinical outcome of using this rapid real-time PCR assay in glycopeptide antibiotic therapy in clinical settings.

Evaluation of direct 16S rDNA sequencing as a metagenomics-based approach to screening bacteria in bottled water

Deliberate or accidental contamination of food, feed, and water supplies poses a threat to human health worldwide. A rapid and sensitive detection technique that could replace the current labor-intensive and time-consuming culture-based methods is highly desirable. In addition to species-specific assays, such as PCR, there is a need for generic methods to screen for unknown pathogenic microorganisms in samples. This work presents a metagenomics-based direct-sequencing approach for detecting unknown microorganisms, using Bacillus cereus (as a model organism for B. anthracis) in bottled water as an example. Total DNA extraction and 16S rDNA gene sequencing were used in combination with principle component analysis and multicurve resolution to study detection level and possibility for identification. Results showed a detection level of 10(5) to 10(6) CFU/L. Using this method, it was possible to separate 2 B. cereus strains by the principal component plot, despite the close sequence resemblance. A linear correlation between the artificial contamination level and the relative amount of the Bacillus artificial contaminant in the metagenome was observed, and a relative amount value above 0.5 confirmed the presence of Bacillus. The analysis also revealed that background flora in the bottled water varied between the different water types that were included in the study. This method has the potential to be adapted to other biological matrices and bacterial pathogens for fast screening of unknown bacterial threats in outbreak situations.

Monitoring infection: from blood culture to polymerase chain reaction (PCR)

In patients with sepsis, diagnosis of blood stream infection (BSI) is a key concern to the therapist. Direct verification of pathogens in the blood stream executed by blood cultures (BC) still is regarded as the gold standard up to date. The quickest possible initiation of an appropriate antimicrobial therapy is a cornerstone of an effective therapy. Moreover, in this view BC can also serve to identify antimicrobial agents to target the pathogen. However, when employing BC the time needed until microbiological results are available ranges from 24 up to 72 h. Moreover, infections caused by multiple pathogens often remain undetected and concurrent antibiotic therapy may lower the overall sensitivity. Alternative pathogen characterization can be performed by polymerase chain reaction (PCR) based amplification methods. Results using PCR can be obtained within 6-8 h. Therefore, the time delay until an appropriate therapy can be reduced enormously. Moreover, these methods have the potential to enhance the sensitivity in the diagnosis of blood stream infections. Therefore, PCR based methods might be a valuable adjunct to present procedures of diagnosing bacteraemia.

Multiplex real-time PCR assay for rapid detection of methicillin-resistant staphylococci directly from positive blood cultures

Methicillin-resistant Staphylococcus aureus (MRSA) is the most prevalent cause of bloodstream infections (BSIs) and is recognized as a major nosocomial pathogen. This study aimed to evaluate a newly designed multiplex real-time PCR assay capable of the simultaneous detection of mecA, S. aureus, and coagulase-negative staphylococci (CoNS) in blood culture specimens. The Real-MRSA and Real-MRCoNS multiplex real-time PCR assays (M&D, Republic of Korea) use the TaqMan probes 16S rRNA for Staphylococcus spp., the nuc gene for S. aureus, and the mecA gene for methicillin resistance. The detection limit of the multiplex real-time PCR assay was 10(3) CFU/ml per PCR for each gene target. The multiplex real-time PCR assay was evaluated using 118 clinical isolates from various specimen types and a total of 350 positive blood cultures from a continuous monitoring blood culture system. The results obtained with the multiplex real-time PCR assay for the three targets were in agreement with those of conventional identification and susceptibility testing methods except for one organism. Of 350 positive bottle cultures, the sensitivities of the multiplex real-time PCR kit were 100% (166/166 cultures), 97.2% (35/36 cultures), and 99.2% (117/118 cultures) for the 16S rRNA, nuc, and mecA genes, respectively, and the specificities for all three targets were 100%. The Real-MRSA and Real-MRCoNS multiplex real-time PCR assays are very useful for the rapid accurate diagnosis of staphylococcal BSIs. In addition, the Real-MRSA and Real-MRCoNS multiplex real-time PCR assays could have an important impact on the choice of appropriate antimicrobial therapy, based on detection of the mecA gene.

Real-time PCR TaqMan assay for rapid screening of bloodstream infection

Background

Sepsis is one of the main causes of mortality and morbidity. The rapid detection of pathogens in blood of septic patients is essential for adequate antimicrobial therapy and better prognosis. This study aimed to accelerate the detection and discrimination of Gram-positive (GP) and Gram-negative (GN) bacteria and Candida species in blood culture samples by molecular methods.

Methods

The Real-GP®, -GN®, and -CAN® real-time PCR kit (M&D, Wonju, Republic of Korea) assays use the TaqMan probes for detecting pan-GP, pan-GN, and pan-Candida species, respectively. The diagnostic performances of the real-time PCR kits were evaluated with 115 clinical isolates, 256 positive and 200 negative blood culture bottle samples, and the data were compared to results obtained from conventional blood culture.

Results

Eighty-seven reference strains and 115 clinical isolates were correctly identified with specific probes corresponding to GP-bacteria, GN-bacteria and Candida, respectively. The overall sensitivity and specificity of the real-time PCR kit with blood culture samples were 99.6% and 89.5%, respectively.

Conclusions

The Real-GP®, -GN®, and -CAN® real-time PCR kits could be useful tools for the rapid and accurate screening of bloodstream infections (BSIs).

A novel, multiplex, real-time PCR-based approach for the detection of the commonly occurring pathogenic fungi and bacteria

Background

Polymerase chain reaction (PCR)-based techniques are widely used to identify fungal and bacterial infections. There have been numerous reports of different, new, real-time PCR-based pathogen identification methods although the clinical practicability of such techniques is not yet fully clarified.

The present study focuses on a novel, multiplex, real-time PCR-based pathogen identification system developed for rapid differentiation of the commonly occurring bacterial and fungal causative pathogens of bloodstream infections.

Results

A multiplex, real-time PCR approach is introduced for the detection and differentiation of fungi, Gram-positive (G+) and Gram-negative (G-) bacteria. The Gram classification is performed with the specific fluorescence resonance energy transfer (FRET) probes recommended for LightCycler capillary real-time PCR. The novelty of our system is the use of a non-specific SYBR Green dye instead of labelled anchor probes or primers, to excite the acceptor dyes on the FRET probes. In conjunction with this, the use of an intercalating dye allows the detection of fungal amplicons.

With the novel pathogen detection system, fungi, G + and G- bacteria in the same reaction tube can be differentiated within an hour after the DNA preparation via the melting temperatures of the amplicons and probes in the same tube.

Conclusions

This modified FRET technique is specific and more rapid than the gold-standard culture-based methods. The fact that fungi, G + and G- bacteria were successfully identified in the same tube within an hour after the DNA preparation permits rapid and early evidence-based management of bloodstream infections in clinical practice.

Pre-analytical sample treatment and DNA extraction protocols for the detection of bacterial pathogens from whole blood

Molecular diagnostics is an increasing popular approach for the direct detection and identification of pathogenic bacteria in clinical samples. Conventional culture techniques are time-consuming and therefore causing a delay in the diagnosis of the patient. Alternative techniques based on nucleic acid amplification offer a shorter turn-around-time and the ability to identify fastidious and non-cultivable organisms. However, molecular detection of bacteria in blood, by for example PCR, RT-PCR, or sequencing of the 16S rDNA genes is often complicated by the presence of PCR-inhibitory compounds. Here we describe several different methods for the extraction of bacterial DNA from whole blood samples. The methods differ regarding costs, hands-on time as well as regarding sensitivity. In combination with a model PCR the detection limits that can be reached using the different methods range from 1,000 to 50 cfu/ml.

The potential of high resolution melting analysis (hrma) to streamline, facilitate and enrich routine diagnostics in medical microbiology

BACKGROUND

Routine medical microbiology diagnostics relies on conventional cultivation followed by phenotypic techniques for identification of pathogenic bacteria and fungi. This is not only due to tradition and economy but also because it provides pure culture needed for antibiotic susceptibility testing. This review focuses on the potential of High Resolution Melting Analysis (HRMA) of double-stranded DNA for future routine medical microbiology.

METHODS AND RESULTS

Search of MEDLINE database for publications showing the advantages of HRMA in routine medical microbiology for identification, strain typing and further characterization of pathogenic bacteria and fungi in particular. The results show increasing numbers of newly-developed and more tailor-made assays in this field. For microbiologists unfamiliar with technical aspects of HRMA, we also provide insight into the technique from the perspective of microbial characterization.

CONCLUSIONS

We can anticipate that the routine availability of HRMA in medical microbiology laboratories will provide a strong stimulus to this field. This is already envisioned by the growing number of medical microbiology applications published recently. The speed, power, convenience and cost effectiveness of this technology virtually predestine that it will advance genetic characterization of microbes and streamline, facilitate and enrich diagnostics in routine medical microbiology without interfering with the proven advantages of conventional cultivation.

Multiplex PCR allows rapid and accurate diagnosis of bloodstream infections in newborns and children with suspected sepsis

Sepsis is a major health problem in newborns and children. Early detection of pathogens allows initiation of appropriate antimicrobial therapy that strongly correlates with positive outcomes. Multiplex PCR has the potential to rapidly identify bloodstream infections, compensating for the loss of blood culture sensitivity. In an Italian pediatric hospital, multiplex PCR (the LightCycler SeptiFast test) was compared to routine blood culture with 1,673 samples obtained from 803 children with suspected sepsis; clinical and laboratory information was used to determine the patient infection status. Excluding results attributable to contaminants, SeptiFast showed a sensitivity of 85.0% (95% confidence interval [CI] = 78.7 to 89.7%) and a specificity of 93.5% (95% CI = 92.1 to 94.7%) compared to blood culture. The rate of positive results was significantly higher with SeptiFast (14.6%) than blood culture (10.3%) (P < 0.0001), and the overall positivity rate was 16.1% when the results of both tests were combined. Staphylococcus aureus (11.6%), coagulase-negative staphylococci (CoNS) (29.6%), Pseudomonas aeruginosa (16.5%), and Klebsiella spp. (10.1%) were the most frequently detected. SeptiFast identified 97 additional isolates that blood culture failed to detect (24.7% P. aeruginosa, 23.7% CoNS, 14.4% Klebsiella spp., 14.4% Candida spp.). Among specimens taken from patients receiving antibiotic therapy, we also observed a significantly higher rate of positivity of SeptiFast than blood culture (14.1% versus 6.5%, respectively; P < 0.0001). On the contrary, contaminants were significantly more frequent among blood cultures than SeptiFast (n = 97 [5.8%] versus n = 26 [1.6%]), respectively; P < 0.0001). SeptiFast served as a highly valuable adjunct to conventional blood culture in children, adding diagnostic value and shortening the time to result (TTR) to 6 h.

Gamma-phage lysin PlyG sequence-based synthetic peptides coupled with Qdot-nanocrystals are useful for developing detection methods for Bacillus anthracis by using its surrogates, B. anthracis-Sterne and B. cereus-4342

BACKGROUND

Previous reports of site-directed deletion analysis on gamma (gamma)-phage lysin protein (PlyG) have demonstrated that removal of a short amino acid sequence in the C-terminal region encompassing a 10-amino acid motif (190LKMTADFILQ199) abrogates its binding activity specific to the cell wall of Bacillus anthracis. Whether short synthetic peptides representing the10-amino acid PlyG putative binding motif flanked by surrounding N- and C-terminal residues also selectively bind to the bacterial cell wall has not been evaluated. If such peptides do demonstrate selective binding to the cell wall, they could serve as bio-probes towards developing detection technologies for B. anthracis. Furthermore, by using B. anthracis (Sterne, 34F2), an animal vaccine and B. cereus-4342, a gamma-phage susceptible rare strain as surrogates of B. anthracis, development of proof-of-concepts for B. anthracis are feasible.

RESULTS

Using four different methods, we evaluated six synthetic peptides representing the putative binding motif including flanking sequences (PlyG-P1 through P6) for the bacterial cell wall binding capacity. Our analysis identified PlyG-P1, PlyG-P3 and PlyG-P5 to have binding capability to both B. anthracis (Sterne, 34F2) and B. cereus-4342. The peptides however did not bind to B. cereus-11778, B. thuringiensis, and B. cereus-10876 suggesting their specificity for B. anthracis-Sterne and B. cereus-4342. PlyG-P3 in combination with fluorescent light microscopy detected even a single bacterium in plasma spiked with the bacteria.

CONCLUSION

Overall, these studies illustrate that the short 10-amino acid sequence 'LKMTADFILQ' in fact is a stand-alone bacterial cell wall-binding motif of PlyG. In principle, synthetic peptides PlyG-P1, PlyG-P3 and PlyG-P5, especially PlyG-P3 coupled with Qdot-nanocrystals are useful as high-sensitivity bio-probes in developing detection technologies for B. anthracis.

Rapid diagnosis of sepsis and bacterial meningitis in children with real-time fluorescent quantitative polymerase chain reaction amplification in the bacterial 16S rRNA gene

A method for the detection of bacterial pathogens in sepsis and bacterial meningitis with 16S rRNA gene- based real-time fluorescent quantitative polymerase chain reaction (FQ-PCR) is developed. A total of 190 blood specimens and 5 cerebrospinal fluid specimens from neonates with suspected sepsis or bacterial meningitis were evaluated with 16S rRNA gene-based real-time FQ-PCR assay. The positive rate of the real-time FQ-PCR assay was significantly higher (25/195, 12.82%) than that of bacterial culture (15/195, 7.69%; P = .002). When bacterial culture was used as a control, the sensitivity of the real-time FQ-PCR was 100%, the specificity was 94.4%, and Youden's index was 0.944. This study suggests that 16S rRNA gene-based real-time FQ-PCR assay is an important and accurate method in the detection of bacterial pathogens of sepsis and bacterial meningitis and should have a promising usage in the diagnosis of sepsis and bacterial meningitis.

Evaluation of new preanalysis sample treatment tools and DNA isolation protocols to improve bacterial pathogen detection in whole blood

Two novel preanalysis sample treatment tools were evaluated in combination with four DNA extraction kits for the selective isolation of bacterial DNA from whole blood. The combination of performing a preanalysis sample treatment and using a larger sample volume increased the detection limit to 50 CFU per ml.

Multiplex real-time PCR and blood culture for identification of bloodstream pathogens in patients with suspected sepsis

Severe sepsis is increasingly a cause of death. Rapid and correct initial antimicrobial treatment reduces mortality. The aetiological agent(s) cannot always be found in blood cultures (BCs). A novel multiplex PCR test (SeptiFast (alpha version)) that allows identification of 20 bacterial and fungal species directly from blood was used, comparatively with BC, in a multicentre trial of patients with suspected bacterial or fungal sepsis. Five hundred and fifty-eight paired samples from 359 patients were evaluated. The rate of positivity was 17% for BC and 26% for SeptiFast. Ninety-six microorganisms were isolated with BC, and 186 microorganisms were identified with SeptiFast; 231 microorganisms were found by combining the two tests. Of the 96 isolates identified with BC, 22 isolates were considered to be contaminants. Of the remaining 74 non-contaminant BC isolates available for comparison with SeptiFast, 50 were identified as a species identical to the species identified with SeptiFast in the paired sample. Of the remaining 24 BC isolates for which the species, identified in the BC, could not be detected in the paired SeptiFast sample, 18 BC isolates were identified as a species included in the SeptiFast master list, and six BC isolates were identified as a species not included in the SeptiFast master list. With SeptiFast, 186 microorganisms were identified, 12 of which were considered to be contaminants. Of the 174 clinically relevant microorganisms identified with SeptiFast, 50 (29%) were detected by BC. More than half of the remaining microorganisms identified with SeptiFast (but not isolated after BC) were also found in routine cultures of other relevant samples taken from the patients. Future clinical studies should assess whether the use of SeptiFast is of significant advantage in the detection of bloodstream pathogens.

Validation criteria for nucleic acid amplification techniques for bacterial infections

Nucleic acid techniques (NATs), such as species-specific and universal polymerase chain reactions (PCRs), are finding ever wider use in the diagnosis of bacterial infection. However, although universal PCR assays, in particular, approach a type of modern Petri dish, they have a number of limitations which restrict their applicability. The sensitivity of universal PCR is lower than that of many species-specific PCRs, and the contamination of samples and PCR reagents with irrelevant DNA from various sources remains a problem. Thus, NATs in general and universal PCR assays in particular require careful validation to be of value for the diagnosis of infection. Validation includes sampling, DNA extraction/isolation, template amplification and visualisation of the results. Furthermore, it implies the establishment of measures of asepsis, the inclusion of positive and negative controls, techniques to optimise the release of DNA from bacterial cells, adequate repetition of the amplification reaction, and routine testing of reagent negative and inhibition controls. Finally, it entails the comparison of results obtained by NATs with those obtained by conventional microbiological methods and matching with clinical evidence of infection. Validation of NATs in clinical diagnosis remains an ongoing challenge. Because of these limitations, NATs can only serve as adjunct tools for the diagnosis of infection in selected cases; they cannot replace conventional culturing techniques.

Gram stain-specific-probe-based real-time PCR for diagnosis and discrimination of bacterial neonatal sepsis

Sepsis is a serious disease with high mortality in newborns. It is very important to have a convenient and accurate method for pathogenic diagnosis of neonatal sepsis. We developed a method of simultaneous detection and Gram classification of clinically relevant bacterial pathogens causing sepsis directly from blood samples with Gram stain-specific-probe-based real-time PCR (GSPBRT-PCR). With GSPBRT-PCR, 53 clinically important strains representing 25 gram-positive and 28 gram-negative bacterial species were identified correctly with the corresponding Gram probe. The limits of the GSPBRT-PCR assay in serial dilutions of the bacteria revealed that Staphylococcus aureus could be detected at concentrations of 3 CFU per PCR and Escherichia coli at concentrations as low as 1 CFU per PCR. The GSPBRT-PCR assay was further evaluated on 600 blood specimens from patients with suspicion of neonatal sepsis and compared to the results obtained from blood cultures. The positive rate of the GSPBRT-PCR array was 50/600 (8.33%), significantly higher than that of blood culture (34/600; 5.67%) (P = 0.00003). When blood culture was used as a control, the sensitivity of GSPBRT-PCR was 100%, the specificity was 97.17%, and the index of accurate diagnosis was 0.972. This study suggests that GSPBRT-PCR is very useful for the rapid and accurate diagnosis of bacterial infection and that it can have an important impact on the current inappropriate and unnecessary use of antibiotics in the treatment of newborns.

Gold nanostoves for microsecond DNA melting analysis

In traditional DNA melting assays, the temperature of the DNA-containing solution is slowly ramped up. In contrast, we use 300 ns laser pulses to rapidly heat DNA bound gold nanoparticle aggregates. We show that double-stranded DNA melts on a microsecond time scale that leads to a disintegration of the gold nanoparticle aggregates on a millisecond time scale. A perfectly matching and a point-mutated DNA sequence can be clearly distinguished in less than one millisecond even in a 1:1 mixture of both targets.

A multiplex real-time PCR assay for rapid detection and differentiation of 25 bacterial and fungal pathogens from whole blood samples

Early detection of bloodstream infections (BSI) is crucial in the clinical setting. Blood culture remains the gold standard for diagnosing BSI. Molecular diagnostic tools can contribute to a more rapid diagnosis in septic patients. Here, a multiplex real-time PCR-based assay for rapid detection of 25 clinically important pathogens directly from whole blood in <6 h is presented. Minimal analytical sensitivity was determined by hit rate analysis from 20 independent experiments. At a concentration of 3 CFU/ml a hit rate of 50% was obtained for E. aerogenes and 100% for S. marcescens, E. coli, P. mirabilis, P. aeruginosa, and A. fumigatus. The hit rate for C. glabrata was 75% at 30 CFU/ml. Comparing PCR identification results with conventional microbiology for 1,548 clinical isolates yielded an overall specificity of 98.8%. The analytical specificity in 102 healthy blood donors was 100%. Although further evaluation is warranted, our assay holds promise for more rapid pathogen identification in clinical sepsis.

Real-Time Polymerase Chain Reaction in Transfusion Medicine: Applications for Detection of Bacterial Contamination in Blood Products

Bacterial contamination of blood components, particularly of platelet concentrates (PCs), represents the greatest infectious risk in blood transfusion. Although the incidence of platelet bacterial contamination is approximately 1 per 2,000 U, the urgent need for a method for the routine screening of PCs to improve safety for patients had not been considered for a long time. Besides the culturing systems, which will remain the criterion standard, rapid methods for sterility screening will play a more important role in transfusion medicine in the future. In particular, nucleic acid amplification techniques (NATs) are powerful potential tools for bacterial screening assays. The combination of excellent sensitivity and specificity, reduced contamination risk, ease of performance, and speed has made real-time polymerase chain reaction (PCR) technology an appealing alternative to conventional culture-based testing methods. When using real-time PCR for the detection of bacterial contamination, several points have to be considered. The main focus is the choice of the target gene; the assay format; the nucleic acid extraction method, depending on the sample type; and the evaluation of an ideal sampling strategy. However, several factors such as the availability of bacterial-derived nucleic acid amplification reagents, the impracticability, and the cost have limited the use of NATs until now. Attempts to reduce the presence of contaminating nucleic acids from reagents in real-time PCR have been described, but none of these approaches have proven to be very effective or to lower the sensitivity of the assay. Recently, a number of broad-range NAT assays targeting the 16S ribosomal DNA or 23S ribosomal RNA for the detection of bacteria based on real-time technology have been reported. This review will give a short survey of current approaches to and the limitations of the application of real-time PCR for bacterial detection in blood components, with emphasis on the bacterial contamination of PCs.

Multiplexed identification of blood-borne bacterial pathogens by use of a novel 16S rRNA gene PCR-ligase detection reaction-capillary electrophoresis assay

We have developed a novel high-throughput PCR-ligase detection reaction-capillary electrophoresis (PCR-LDR-CE) assay for the multiplexed identification of 20 blood-borne pathogens (Staphylococcus epidermidis, Staphylococcus aureus, Bacillus cereus, Enterococcus faecalis, Enterococcus faecium, Listeria monocytogenes, Streptococcus pneumoniae, Streptococcus pyogenes, Streptococcus agalactiae, Escherichia coli, Klebsiella pneumoniae, Haemophilus influenzae, Pseudomonas aeruginosa, Acinetobacter baumannii, Neisseria meningitidis, Bacteroides fragilis, Bacillus anthracis, Yersinia pestis, Francisella tularensis, and Brucella abortus), the last four of which are biothreat agents. The method relies on the amplification of two regions within the bacterial 16S rRNA gene, using universal PCR primers and querying the identity of specific single-nucleotide polymorphisms within the amplified regions in a subsequent LDR. The ligation products vary in color and size and are separated by CE. Each organism generates a specific pattern of ligation products, which can be used to distinguish the pathogens using an automated software program we developed for that purpose. The assay has been verified on 315 clinical isolates and demonstrated a detection sensitivity of 98%. Additionally, 484 seeded blood cultures were tested, with a detection sensitivity of 97.7%. The ability to identify geographically variant strains of the organisms was determined by testing 132 isolates obtained from across the United States. In summary, the PCR-LDR-CE assay can successfully identify, in a multiplexed fashion, a panel of 20 blood-borne pathogens with high sensitivity and specificity.

Development of a broad-range 16S rDNA real-time PCR for the diagnosis of septic arthritis in children

The broad-range PCR has been successfully developed to search for fastidious, slow-growing or uncultured bacteria, and is mostly used when an empirical antibiotic treatment has already been initiated. The technique generally involves standard PCR targeting the gene coding for 16S ribosomal RNA, and includes a post-PCR visualisation step on agarose gel which is a potential source of cross-over contamination. In addition, interpretation of the presence of amplified products on gels can be difficult. We then developed a new SYBR Green-based, universal real-time PCR assay targeting the gene coding for 16S ribosomal RNA, coupled with sequencing of amplified products. The real-time PCR assay was evaluated on 94 articular fluid samples collected from children hospitalised for suspicion of septic arthritis, as compared to the results obtained with bacterial cultures and conventional broad-range PCR. DNA extraction was performed with the automated MagNa Pure system. We could detect DNA from various bacterial pathogens including fastidious bacteria (Kingella kingae, Streptococcus pneumoniae, Streptococcus pyogenes, Salmonella spp, Staphylococcus aureus) from 23% of cases of septic arthritis giving negative culture results. The real-time technique was easier to interpret and allowed to detect four more cases than conventional PCR. PCR based molecular techniques appear to be essential to perform in case of suspicion of septic arthritis, provided the increase of the diagnosed bacterial etiologies. Real-time PCR technique is a sensitive and reliable technique, which can replace conventional PCR for clinical specimens with negative bacterial culture.

Real-time quantitative broad-range PCR assay for detection of the 16S rRNA gene followed by sequencing for species identification

Here we determined the analytical sensitivities of broad-range real-time PCR-based assays employing one of three different genomic DNA extraction protocols in combination with one of three different primer pairs targeting the 16S rRNA gene to detect a panel of 22 bacterial species. DNA extraction protocol III, using lysozyme, lysostaphin, and proteinase K, followed by PCR with the primer pair Bak11W/Bak2, giving amplicons of 796 bp in length, showed the best overall sensitivity, detecting DNA of 82% of the strains investigated at concentrations of < or =10(2) CFU in water per reaction. DNA extraction protocols I and II, using less enzyme treatment, combined with other primer pairs giving shorter amplicons of 466 bp and 342 or 346 bp, respectively, were slightly more sensitive for the detection of gram-negative but less sensitive for the detection of gram-positive bacteria. The obstacle of detecting background DNA in blood samples spiked with bacteria was circumvented by introducing a broad-range hybridization probe, and this preserved the minimal detection limits observed in samples devoid of blood. Finally, sequencing of the amplicons generated using the primer pair Bak11W/Bak2 allowed species identification of the detected bacterial DNA. Thus, broad-spectrum PCR targeting the 16S rRNA gene in the quantitative real-time format can achieve an analytical sensitivity of 1 to 10 CFU per reaction in water, avoid detection of background DNA with the introduction of a broad-range probe, and generate amplicons that allow species identification of the detected bacterial DNA by sequencing. These prerequisites are important for its application to blood-containing patient samples.