A mutant poliovirus containing a novel proteolytic cleavage site in VP3 is altered in viral maturation

Replication-competent picornaviruses with complete genomic RNA 3' noncoding region deletions

The genomic RNA 3' noncoding region is believed to be a major cis-acting molecular genetic determinant for regulating picornavirus negative-strand RNA synthesis by promoting replication complex recognition. We report the replication of two picornavirus RNAs harboring complete deletions of the genomic RNA 3' noncoding regions. Our results suggest that while specific 3'-terminal RNA sequences and/or secondary structures may have evolved to promote or regulate negative-strand RNA synthesis, the basic mechanism of replication initiation is not strictly template specific and may rely primarily upon the proximity of newly translated viral replication proteins to the 3' terminus of template RNAs within tight membranous replication complexes.

Minimum internal ribosome entry site required for poliovirus infectivity

Translation initiation by internal ribosome binding is a recently discovered mechanism of eukaryotic viral and cellular protein synthesis in which ribosome subunits interact with the mRNAs at internal sites in the 5' untranslated RNA sequences and not with the 5' methylguanosine cap structure present at the extreme 5' ends of mRNA molecules. Uncapped poliovirus mRNAs harbor internal ribosome entry sites (IRES) in their long and highly structured 5' noncoding regions. Such IRES sequences are required for viral protein synthesis. In this study, a novel poliovirus was isolated whose genomic RNA contains two gross deletions removing approximately 100 nucleotides from the predicted IRES sequences within the 5' noncoding region. The deletions originated from previously in vivo-selected viral revertants displaying non-temperature-sensitive phenotypes. Each revertant had a different predicted stem-loop structure within the 5' noncoding region of their genomic RNAs deleted. The mutant poliovirus (Se1-5NC-delta DG) described in this study contains both stem-loop deletions in a single RNA genome, thereby creating a minimum IRES. Se1-5NC-delta DG exhibited slow growth and a pinpoint plaque phenotype following infection of HeLa cells, delayed onset of protein synthesis in vivo, and defective initiation during in vitro translation of the mutated poliovirus mRNAs. Interestingly, the peak levels of viral RNA synthesis in cells infected with Se1-5NC-delta DG occurred at slightly later times in infection than those achieved by wild-type poliovirus, but these mutant virus RNAs accumulated in the host cells during the late phases of virus infection. UV cross-linking assays with the 5' noncoding regions of wild-type and mutated RNAs were carried out in cytoplasmic extracts from HeLa cells and neuronal cells and in reticulocyte lysates to identify the cellular factors that interact with the putative IRES elements. The cellular proteins that were cross-linked to the minimum IRES may represent factors playing an essential role in internal translation initiation of poliovirus mRNAs.

A cellular cofactor facilitates efficient 3CD cleavage of the poliovirus P1 precursor

The production of poliovirus capsid proteins from a capsid protein precursor (P1) is mediated by virus-encoded proteinase 3CD and involves a complicated set of proteinase-substrate interactions. In addition to substrate and enzymatic determinants required for this interaction, we describe a cellular cofactor, which facilitates 3CD recognition of the P1 precursor. Cellular cofactor activity is 3CD dependent and salt dependent. Our analysis shows that proteolytic cleavage of the P1 precursor at the VP0/VP3 cleavage site exhibits a greater dependency on the cellular cofactor than cleavage at the VP3/VP1 site. Such a greater dependency on cellular cofactor activity can be relieved (in part) by the substitution of an Ala residue for the Pro residue at the -4 position of the VP0/VP3 cleavage site. However, mutant viruses containing Pro-to-Ala substitutions at the -4 position of the VP0/VP3 site exhibit defects in viral growth.

Alternate poliovirus nonstructural protein processing cascades generated by primary sites of 3C proteinase cleavage

The post-translational regulation of picornavirus gene expression mediated by the cascade processing of viral proteins is not well understood. Both pulse-chase studies of infected cells and in vitro studies of the translation of poliovirus type 1 RNA transcribed from genomic cDNA clones indicate a specific cascade of polyprotein processing in which the P1, P2, and P3 precursor proteins are primary products of viral proteinase cleavage. We report the results of a short-time kinetic analysis of poliovirus type 1 protein processing in an in vitro translation system and in infected HeLa cells which indicate the existence of another, rapid pathway of polyprotein processing mediated by the activity of the 3C proteinase. The observed pathway is distinct from and in addition to the one previously known. The potential role of this alternative pathway of processing in the post-translational regulation of viral gene expression is discussed.

Ty3 GAG3 and POL3 genes encode the components of intracellular particles

Ty3 is a Saccharomyces cerevisiae retrotransposon that integrates near the transcription initiation sites of polymerase III-transcribed genes. It is distinct from the copialike Ty1 and Ty2 retrotransposons of S. cerevisiae in both the sequences of encoded proteins and gene order. It is a member of the gypsylike family of retrotransposons which resemble animal retroviruses. This study was undertaken to investigate the nucleocapsid particle of a transpositionally active gypsylike retrotransposon. Characterization of extracts from cells in which Ty3 expression was induced showed the presence of Ty3 nucleoprotein complexes, or viruslike particles, that migrated on linear sucrose gradients with a size of 156S. These particles are composed of Ty3 RNA, full-length, linear DNA, and proteins. In this study, antibodies raised against peptides predicted from the Ty3 sequence were used to identify Ty3-encoded proteins. These include the capsid (26 kDa), nucleocapsid (9 kDa), and reverse transcriptase (55 kDa) proteins. Ty3 integrase proteins of 61 and 58 kDa were identified previously (L. J. Hansen and S. B. Sandmeyer, J. Virol. 64:2599-2607, 1990). Reverse transcriptase activity associated with the particles was measured by using exogenous and endogenous primer-templates. Immunofluorescence studies of cells overexpressing Ty3 revealed cytoplasmic clusters of immunoreactive proteins. Transmission electron microscopy showed that Ty3 viruslike particles are about 50 nm in diameter. Thus, despite the unusual position specificity of Ty3 upstream of tRNA-coding regions, aspects of the Ty3 life cycle are fundamentally similar to those of retroviruses.

Folding and processing of the capsid protein precursor P1 is kinetically retarded in neutralization site 3B mutants of poliovirus

Poliovirus mutants in neutralizing antigenic site 3B were constructed by replacing the glutamic acid residue at amino acid 74 of capsid protein VP2 (VP2074E), using site-specific mutagenesis methods. All viable mutants display small-plaque phenotypes. Characterization of these mutants indicates that capsid assembly is perturbed. Although the defect in capsid assembly reduces the yield of mutant virus particles per cell, the resultant assembled particle is wild-type-like in structure and infectivity. Analyses of capsid assembly intermediates show a transient accumulation of the unprocessed capsid protein precursor, P1, indicating that cleavage of the mutant P1 by the 3CD protease is retarded. The mutant VP0-VP3-VP1 complex generated upon P1 cleavage appears assembly competent, forming pentamer and empty capsid assembly intermediates and infectious virion particles. Although the structure of the infectious mutant virus is virtually identical with that of the wild-type virus, the thermal stability of the mutant virus is dramatically increased over that of the wild-type virus. Thus, mutations at this residue are pleiotropic, altering the kinetics of capsid assembly and generating a virus that is more thermostable and more resistant to neutralization by the site 3B monoclonal antibodies.

A rapid method for determination of endoproteinase substrate specificity: specificity of the 3C proteinase from hepatitis A virus

The preferred amino acid residues at the P'1 and P'2 positions of peptide substrates of the 3C proteinase from hepatitis A virus (HAV-3C) have been determined by a rapid screening method. The enzyme was presented with two separate mixtures of N-terminal acetylated peptides, which were identical in sequence except for the amino acids at the P'1 or P'2 positions, where a set of 15 or 16 amino acids was introduced. Enzyme-catalyzed hydrolysis of the peptide mixtures generated free amino termini, which allowed direct sequence analysis by Edman degradation. The relative yield of each amino acid product in the appropriate sequencing cycle gave the amount of each substrate mixture component hydrolyzed. This allowed the simultaneous evaluation of the relative kcat/Km values for each component in the mixture. The peptide substrates preferred by the HAV-3C proteinase in the P'1 mixture were glycine, alanine, and serine. The enzyme has little specificity at P'2; only arginine and proline peptides were excluded as substrates. This method provides a rapid determination of the preferred residues for a peptide substrate and should be applicable to other endoproteinases.

Role for the P4 amino acid residue in substrate utilization by the poliovirus 3CD proteinase

Amino acid insertions or substitutions were introduced into the poliovirus P1 capsid precursor at locations proximal to the two known Q-G cleavage sites to examine the role of the P4 residue in substrate processing by proteinase 3CD. Analysis of the processing profile of P1 precursors containing four-amino-acid insertions into the carboxy terminus of VP3 or a single-amino-acid substitution at the P4 position of the VP3-VP1 cleavage site demonstrates that substitution of the alanine residue in the P4 position of the VP3-VP1 cleavage site significantly affects cleavage at that site by proteinase 3CD. A single-amino-acid substitution at the P4 position of the VP0-VP3 cleavage site, on the other hand, has only a slight effect on 3CD-mediated processing at this cleavage site. Finally, analysis of six amino acid insertion mutations containing Q-G amino acid pairs demonstrates that the in vitro and in vivo selection of a cleavage site from two adjacent Q-G amino acid pairs depends on the presence of an alanine in the P4 position of the cleaved site. Our data provide genetic and biochemical evidence that the alanine residue in the P4 position of the VP3-VP1 cleavage site is a required substrate determinant for the recognition and cleavage of that site by proteinase 3CD and suggest that the P4 alanine residue may be specifically recognized by proteinase 3CD.

Identification of essential amino acid residues in the functional activity of poliovirus 2A protease

Proteolytic processing of poliovirus polyprotein is carried out by the products of two viral genes, 2A and 3C. 2A protease catalyzes cleavage of the polyprotein of type 1 poliovirus at two sites, one a cis cleavage at the 2A N-terminus and the other a trans cleavage within the 3D polymerase. In addition to polyprotein cleavage activity, 2A protease also indirectly induces cleavage of the p220 component of the cap-binding protein complex, which results in selective inhibition of host protein synthesis. Molecular genetic and biochemical analyses of 2A protease were performed to test its putative homology to small trypsin-like serine proteases and to examine the roles of individual amino acids in the reaction mechanism of 2A protease. A recombinant plasmid containing poliovirus 1C, 1D, and 2A gene sequences was expressed in a cell-free transcription/translation system, resulting in synthesis of a precursor protein that underwent efficient self-processing and produced mature 2A protease. To identify residues involved in the catalytic center and/or substrate-binding loops, we generated a series of 2A mutants by site-specific mutagenesis of this plasmid. Mutants were then expressed in vitro and tested for autocatalytic cis cleavage activity, trans cleavage of the 1D/2A junction, and trans-activation of p220-specific protease. Our data suggest that the conserved His20, Asp38, and Cys109 residues recently proposed to be equivalent to the catalytic triad of known serine proteases may comprise the catalytic triad of 2A protease. Surprisingly, Asp38 could be replaced with glutamic acid and retain autocatalytic function. Other amino acid substitutions at Tyr88, Tyr89, and Thr124 suggested that these residues lie in loops involved in substrate binding. Biochemical studies with protease inhibitors indicate that 2A protease activity is blocked by inhibitors specific for serine and cysteine proteases. Overall, the results are consistent with the hypothesis that 2A proteinase is structurally similar to the trypsin-like family of serine proteases with the substitution of cysteine 109 as the active site nucleophile.