An amino acid in the central catalytic domain of three retroviral integrases that affects target site selection in nonviral DNA

Unraveling the palindromic and nonpalindromic motifs of retroviral integration site sequences by statistical mixture models

A weak palindromic nucleotide motif is the hallmark of retroviral integration site alignments. Given that the majority of target sequences are not palindromic, the current model explains the symmetry by an overlap of the nonpalindromic motif present on one of the half-sites of the sequences. Here, we show that the implementation of multicomponent mixture models allows for different interpretations consistent with the existence of both palindromic and nonpalindromic submotifs in the sets of integration site sequences. We further show that the weak palindromic motifs result from freely combined site-specific submotifs restricted to only a few positions proximal to the site of integration. The submotifs are formed by either palindrome-forming nucleotide preference or nucleotide exclusion. Using the mixture models, we also identify HIV-1-favored palindromic sequences in Alu repeats serving as local hotspots for integration. The application of the novel statistical approach provides deeper insight into the selection of retroviral integration sites and may prove to be a valuable tool in the analysis of any type of DNA motifs.

Molecular determinants for Rous sarcoma virus intasome assemblies involved in retroviral integration

Integration of retroviral DNA into the host genome involves the formation of integrase (IN)-DNA complexes termed intasomes. Further characterization of these complexes is needed to understand their assembly process. Here, we report the single-particle cryo-EM structure of the Rous sarcoma virus (RSV) strand transfer complex (STC) intasome produced with IN and a preassembled viral/target DNA substrate at 3.36 Å resolution. The conserved intasome core region consisting of IN subunits contributing active sites interacting with viral/target DNA has a resolution of 3 Å. Our structure demonstrated the flexibility of the distal IN subunits relative to the IN subunits in the conserved intasome core, similar to results previously shown with the RSV octameric cleaved synaptic complex intasome produced with IN and viral DNA only. An extensive analysis of higher resolution STC structure helped in the identification of nucleoprotein interactions important for intasome assembly. Using structure-function studies, we determined the mechanisms of several IN-DNA interactions critical for assembly of both RSV intasomes. We determined the role of IN residues R244, Y246, and S124 in cleaved synaptic complex and STC intasome assemblies and their catalytic activities, demonstrating differential effects. Taken together, these studies advance our understanding of different RSV intasome structures and molecular determinants involved in their assembly.

Structural effects of HIV-1 subtype C integrase mutations on the activity of integrase strand transfer inhibitors in South African patients

HIV-1 integrase enzyme is responsible for the integration of viral DNA into the host genomic DNA. Integrase strand transfer inhibitors (INSTIs) are highly potent antiretroviral agents that inhibit this process, and are internationally approved for the treatment of both naïve and treated HIV-1 patients. However, their long-term efficacy is threatened by development of drug resistance strains resulting in resistance mutations. This work aimed to examine the effect of INSTI resistance-associated mutations (RAMs) and polymorphisms on the structure of HIV-1 subtype C (HIV-1C) integrase. Genetic analysis was performed on seven HIV-1C infected individuals with virologic failure after at least 6 months of INSTI-based antiretroviral therapy, presenting at the King Edward VIII hospital in Durban, South Africa. These were compared with sequences from 41 INSTI-naïve isolates. Integrase structures of selected isolates were modeled on the SWISS model online server. Molecular docking and dynamics simulations were also conducted using AutoDock-Vina and AMBER 18 force fields, respectively. Only one INSTI-treated isolate (14.28%) harboured major mutations (G140A + Q148R) as well as the E157Q minor mutation. Interestingly, S119T and V151I were only found in patients failing raltegravir (an INSTI drug). Molecular modeling and docking showed that RAMs and polymorphisms associated with INSTI-based therapy affect protein stability and this is supported by their weakened hydrogen-bond interactions compared to the wild-type. To the best of our knowledge, this is the first study to identify a double mutant in the 140's loop region from South African HIV-1C isolates and study its effects on Raltegravir, Elvitegravir, and Dolutegravir binding.Communicated by Ramaswamy H. Sarma.

Determinants of Retroviral Integration and Implications for Gene Therapeutic MLV-Based Vectors and for a Cure for HIV-1 Infection

To complete their replication cycle, retroviruses need to integrate a DNA copy of their RNA genome into a host chromosome. Integration site selection is not random and is driven by multiple viral and cellular host factors specific to different classes of retroviruses. Today, overwhelming evidence from cell culture, animal experiments and clinical data suggests that integration sites are important for retroviral replication, oncogenesis and/or latency. In this review, we will summarize the increasing knowledge of the mechanisms underlying the integration site selection of the gammaretrovirus MLV and the lentivirus HIV-1. We will discuss how host factors of the integration site selection of retroviruses may steer the development of safer viral vectors for gene therapy. Next, we will discuss how altering the integration site preference of HIV-1 using small molecules could lead to a cure for HIV-1 infection.

B-to-A transition in target DNA during retroviral integration

Integration into host target DNA (tDNA), a hallmark of retroviral replication, is mediated by the intasome, a multimer of integrase (IN) assembled on viral DNA (vDNA) ends. To ascertain aspects of tDNA recognition during integration, we have solved the 3.5 Å resolution cryo-EM structure of the mouse mammary tumor virus (MMTV) strand transfer complex (STC) intasome. The tDNA adopts an A-like conformation in the region encompassing the sites of vDNA joining, which exposes the sugar-phosphate backbone for IN-mediated strand transfer. Examination of existing retroviral STC structures revealed conservation of A-form tDNA in the analogous regions of these complexes. Furthermore, analyses of sequence preferences in genomic integration sites selectively targeted by six different retroviruses highlighted consistent propensity for A-philic sequences at the sites of vDNA joining. Our structure additionally revealed several novel MMTV IN-DNA interactions, as well as contacts seen in prior STC structures, including conserved Pro125 and Tyr149 residues interacting with tDNA. In infected cells, Pro125 substitutions impacted the global pattern of MMTV integration without significantly altering local base sequence preferences at vDNA insertion sites. Collectively, these data advance our understanding of retroviral intasome structure and function, as well as factors that influence patterns of vDNA integration in genomic DNA.

OUP accepted manuscript

The Sleeping Beauty (SB) transposon system is a popular tool for genome engineering, but random integration into the genome carries a certain genotoxic risk in therapeutic applications. Here we investigate the role of amino acids H187, P247 and K248 in target site selection of the SB transposase. Structural modeling implicates these three amino acids located in positions analogous to amino acids with established functions in target site selection in retroviral integrases and transposases. Saturation mutagenesis of these residues in the SB transposase yielded variants with altered target site selection properties. Transposon integration profiling of several mutants reveals increased specificity of integrations into palindromic AT repeat target sequences in genomic regions characterized by high DNA bendability. The H187V and K248R mutants redirect integrations away from exons, transcriptional regulatory elements and nucleosomal DNA in the human genome, suggesting enhanced safety and thus utility of these SB variants in gene therapy applications.

A single amino acid switch converts the Sleeping Beauty transposase into an efficient unidirectional excisionase with utility in stem cell reprogramming

The Sleeping Beauty (SB) transposon is an advanced tool for genetic engineering and a useful model to investigate cut-and-paste DNA transposition in vertebrate cells. Here, we identify novel SB transposase mutants that display efficient and canonical excision but practically unmeasurable genomic re-integration. Based on phylogenetic analyses, we establish compensating amino acid replacements that fully rescue the integration defect of these mutants, suggesting epistasis between these amino acid residues. We further show that the transposons excised by the exc⁺/int⁻ transposase mutants form extrachromosomal circles that cannot undergo a further round of transposition, thereby representing dead-end products of the excision reaction. Finally, we demonstrate the utility of the exc⁺/int⁻ transposase in cassette removal for the generation of reprogramming factor-free induced pluripotent stem cells. Lack of genomic integration and formation of transposon circles following excision is reminiscent of signal sequence removal during V(D)J recombination, and implies that cut-and-paste DNA transposition can be converted to a unidirectional process by a single amino acid change.

Structural Insights on Retroviral DNA Integration: Learning from Foamy Viruses

Foamy viruses (FV) are retroviruses belonging to the Spumaretrovirinae subfamily. They are non-pathogenic viruses endemic in several mammalian hosts like non-human primates, felines, bovines, and equines. Retroviral DNA integration is a mandatory step and constitutes a prime target for antiretroviral therapy. This activity, conserved among retroviruses and long terminal repeat (LTR) retrotransposons, involves a viral nucleoprotein complex called intasome. In the last decade, a plethora of structural insights on retroviral DNA integration arose from the study of FV. Here, we review the biochemistry and the structural features of the FV integration apparatus and will also discuss the mechanism of action of strand transfer inhibitors.

Cryo-EM structures and atomic model of the HIV-1 strand transfer complex intasome

Like all retroviruses, HIV-1 irreversibly inserts a viral DNA (vDNA) copy of its RNA genome into host target DNA (tDNA). The intasome, a higher-order nucleoprotein complex composed of viral integrase (IN) and the ends of linear vDNA, mediates integration. Productive integration into host chromatin results in the formation of the strand transfer complex (STC) containing catalytically joined vDNA and tDNA. HIV-1 intasomes have been refractory to high-resolution structural studies. We used a soluble IN fusion protein to facilitate structural studies, through which we present a high-resolution cryo-electron microscopy (cryo-EM) structure of the core tetrameric HIV-1 STC and a higher-order form that adopts carboxyl-terminal domain rearrangements. The distinct STC structures highlight how HIV-1 can use the common retroviral intasome core architecture to accommodate different IN domain modules for assembly.

Crystal structure of the Rous sarcoma virus intasome

Integration of the reverse-transcribed viral DNA into the host genome is an essential step in the life cycle of retroviruses. Retrovirus integrase catalyses insertions of both ends of the linear viral DNA into a host chromosome. Integrase from HIV-1 and closely related retroviruses share the three-domain organization, consisting of a catalytic core domain flanked by amino- and carboxy-terminal domains essential for the concerted integration reaction. Although structures of the tetrameric integrase-DNA complexes have been reported for integrase from prototype foamy virus featuring an additional DNA-binding domain and longer interdomain linkers, the architecture of a canonical three-domain integrase bound to DNA remained elusive. Here we report a crystal structure of the three-domain integrase from Rous sarcoma virus in complex with viral and target DNAs. The structure shows an octameric assembly of integrase, in which a pair of integrase dimers engage viral DNA ends for catalysis while another pair of non-catalytic integrase dimers bridge between the two viral DNA molecules and help capture target DNA. The individual domains of the eight integrase molecules play varying roles to hold the complex together, making an extensive network of protein-DNA and protein-protein contacts that show both conserved and distinct features compared with those observed for prototype foamy virus integrase. Our work highlights the diversity of retrovirus intasome assembly and provides insights into the mechanisms of integration by HIV-1 and related retroviruses.

Structural and sequencing analysis of local target DNA recognition by MLV integrase

Target-site selection by retroviral integrase (IN) proteins profoundly affects viral pathogenesis. We describe the solution nuclear magnetic resonance structure of the Moloney murine leukemia virus IN (M-MLV) C-terminal domain (CTD) and a structural homology model of the catalytic core domain (CCD). In solution, the isolated MLV IN CTD adopts an SH3 domain fold flanked by a C-terminal unstructured tail. We generated a concordant MLV IN CCD structural model using SWISS-MODEL, MMM-tree and I-TASSER. Using the X-ray crystal structure of the prototype foamy virus IN target capture complex together with our MLV domain structures, residues within the CCD α2 helical region and the CTD β1-β2 loop were predicted to bind target DNA. The role of these residues was analyzed in vivo through point mutants and motif interchanges. Viable viruses with substitutions at the IN CCD α2 helical region and the CTD β1-β2 loop were tested for effects on integration target site selection. Next-generation sequencing and analysis of integration target sequences indicate that the CCD α2 helical region, in particular P187, interacts with the sequences distal to the scissile bonds whereas the CTD β1-β2 loop binds to residues proximal to it. These findings validate our structural model and disclose IN-DNA interactions relevant to target site selection.

Retroviral Integrase Structure and DNA Recombination Mechanism

Due to the importance of human immunodeficiency virus type 1 (HIV-1) integrase as a drug target, the biochemistry and structural aspects of retroviral DNA integration have been the focus of intensive research during the past three decades. The retroviral integrase enzyme acts on the linear double-stranded viral DNA product of reverse transcription. Integrase cleaves specific phosphodiester bonds near the viral DNA ends during the 3' processing reaction. The enzyme then uses the resulting viral DNA 3'-OH groups during strand transfer to cut chromosomal target DNA, which simultaneously joins both viral DNA ends to target DNA 5'-phosphates. Both reactions proceed via direct transesterification of scissile phosphodiester bonds by attacking nucleophiles: a water molecule for 3' processing, and the viral DNA 3'-OH for strand transfer. X-ray crystal structures of prototype foamy virus integrase-DNA complexes revealed the architectures of the key nucleoprotein complexes that form sequentially during the integration process and explained the roles of active site metal ions in catalysis. X-ray crystallography furthermore elucidated the mechanism of action of HIV-1 integrase strand transfer inhibitors, which are currently used to treat AIDS patients, and provided valuable insights into the mechanisms of viral drug resistance.

Integrase residues that determine nucleotide preferences at sites of HIV-1 integration: implications for the mechanism of target DNA binding

Retroviruses favor target-DNA (tDNA) distortion and particular bases at sites of integration, but the mechanism underlying HIV-1 selectivity is unknown. Crystal structures revealed a network of prototype foamy virus (PFV) integrase residues that distort tDNA: Ala188 and Arg329 interact with tDNA bases, while Arg362 contacts the phosphodiester backbone. HIV-1 integrase residues Ser119, Arg231, and Lys258 were identified here as analogs of PFV integrase residues Ala188, Arg329 and Arg362, respectively. Thirteen integrase mutations were analyzed for effects on integrase activity in vitro and during virus infection, yielding a total of 1610 unique HIV-1 integration sites. Purine (R)/pyrimidine (Y) dinucleotide sequence analysis revealed HIV-1 prefers the tDNA signature (0)RYXRY(4), which accordingly favors overlapping flexible dinucleotides at the center of the integration site. Consistent with roles for Arg231 and Lys258 in sequence specific and non-specific binding, respectively, the R231E mutation altered integration site nucleotide preferences while K258E had no effect. S119A and S119T integrase mutations significantly altered base preferences at positions −3 and 7 from the site of viral DNA joining. The S119A preference moreover mimicked wild-type PFV selectivity at these positions. We conclude that HIV-1 IN residue Ser119 and PFV IN residue Ala188 contact analogous tDNA bases to effect virus integration.

Alternative nucleophilic substrates for the endonuclease activities of human immunodeficiency virus type 1 integrase

Retroviral integrase can use water or some small alcohols as the attacking nucleophile to nick DNA. To characterize the range of compounds that human immunodeficiency virus type 1 integrase can accommodate for its endonuclease activities, we tested 45 potential electron donors (having varied size and number or spacing of nucleophilic groups) as substrates during site-specific nicking at viral DNA ends and during nonspecific nicking reactions. We found that integrase used 22 of the 45 compounds to nick DNA, but not all active compounds were used for both activities. In particular, 13 compounds were used for site-specific and nonspecific nicking, 5 only for site-specific nicking, and 4 only for nonspecific nicking; 23 other compounds were not used for either activity. Thus, integrase can accommodate a large number of nucleophilic substrates but has selective requirements for its different activities, underscoring its dynamic properties and providing new information for modeling and understanding integrase.

Uncommon pathways of immune escape attenuate HIV-1 integrase replication capacity

An attenuation of the HIV-1 replication capacity (RC) has been observed for immune-mediated escape mutations in Gag restricted by protective HLA alleles. However, the extent to which escape mutations affect other viral proteins during natural infection is not well understood. We generated recombinant viruses encoding plasma HIV-1 RNA integrase sequences from antiretroviral-naïve individuals with early (n = 88) and chronic (n = 304) infections and measured the in vitro RC of each. In contrast to data from previous studies of Gag, we observed little evidence that host HLA allele expression was associated with integrase RC. A modest negative correlation was observed between the number of HLA-B-associated integrase polymorphisms and RC in chronic infection (R = -0.2; P = 0.003); however, this effect was not driven by mutations restricted by protective HLA alleles. Notably, the integrase variants S119R, G163E, and I220L, which represent uncommon polymorphisms associated with HLA-C*05, -A*33, and -B*52, respectively, correlated with lower RC (all q < 0.2). We identified a novel C*05-restricted epitope (HTDNGSNF(114-121)) that likely contributes to the selection of the S119R variant, the polymorphism most significantly associated with lower RC in patient sequences. An NL4-3 mutant encoding the S119R polymorphism displayed a ~35%-reduced function that was rescued by a single compensatory mutation of A91E. Together, these data indicate that substantial HLA-driven attenuation of integrase is not a general phenomenon during HIV-1 adaptation to host immunity. However, uncommon polymorphisms selected by HLA alleles that are not conventionally regarded to be protective may be associated with impaired protein function. Vulnerable epitopes in integrase might therefore be considered for future vaccine strategies.

Evaluation of a system to screen for stimulators of non-specific DNA nicking by HIV-1 integrase: application to a library of 50,000 compounds

BACKGROUND

In addition to activities needed to catalyse integration, retroviral integrases exhibit non-specific endonuclease activity that is enhanced by certain small compounds, suggesting that integrase could be stimulated to damage viral DNA before integration occurs.

METHODS

A non-radioactive, plate-based, solution phase, fluorescence assay was used to screen a library of 50,080 drug-like chemicals for stimulation of non-specific DNA nicking by HIV-1 integrase.

RESULTS

A semi-automated workflow was established and primary hits were readily identified from a graphic output. Overall, 0.6% of the chemicals caused a large increase in fluorescence (the primary hit rate) without also having visible colour that could have artifactually caused this result. None of the potential stimulators from this moderate-size library, however, passed a secondary test that included an inactive integrase mutant that assessed whether the increased fluorescence depended on the endonuclease activity of integrase.

CONCLUSIONS

This first attempt at identifying integrase stimulator compounds establishes the necessary logistics and workflow required. The results from this study should encourage larger scale high-throughput screening to advance the novel antiviral strategy of stimulating integrase to damage retroviral DNA.

Current advances in retroviral gene therapy

There have been major changes since the incidents of leukemia development in X-SCID patients after the treatments using retroviral gene therapy. Due to the risk of oncogenesis caused by retroviral insertional activation of host genes, most of the efforts focused on the lentiviral therapies. However, a relative clonal dominance was detected in a patient with β-thalassemia Major, two years after the subject received genetically modified hematopoietic stem cells using lentiviral vectors. This disappointing result of the recent clinical trial using lentiviral vector tells us that the current and most advanced vector systems does not have enough safety. In this review, various safety features that have been tried for the retroviral gene therapy are introduced and the possible new ways of improvements are discussed. Additional feature of chromatin insulators, co-transduction of a suicidal gene under the control of an inducible promoter, conditional expression of the transgene only in appropriate target cells, targeted transduction, cell type-specific expression, targeted local administration, splitting of the viral genome, and site specific insertion of retroviral vector are discussed here.

Structural insights into the retroviral DNA integration apparatus

Retroviral replication depends on successful integration of the viral genetic material into a host cell chromosome. Virally encoded integrase, an enzyme from the DDE(D) nucleotidyltransferase superfamily, is responsible for the key DNA cutting and joining steps associated with this process. Insights into the structural and mechanistic aspects of integration are directly relevant for the development of antiretroviral drugs. Recent breakthroughs have led to biochemical and structural characterization of the principal integration intermediates revealing the tetramer of integrase that catalyzes insertion of both 3' viral DNA ends into a sharply bent target DNA. This review discusses the mechanism of retroviral DNA integration and the mode of action of HIV-1 integrase strand transfer inhibitors in light of the recent visualization of the prototype foamy virus intasome, target DNA capture and strand transfer complexes.

The mechanism of retroviral integration from X-ray structures of its key intermediates

To establish productive infection, a retrovirus must insert a DNA replica of its genome into host cell chromosomal DNA. This process is operated by the intasome, a nucleoprotein complex composed of an integrase tetramer (IN) assembled on the viral DNA ends. The intasome engages chromosomal DNA within a target capture complex to carry out strand transfer, irreversibly joining the viral and cellular DNA molecules. Although several intasome/transpososome structures from the DDE(D) recombinase superfamily have been reported, the mechanics of target DNA capture and strand transfer by these enzymes remained unclear. Here we report crystal structures of the intasome from prototype foamy virus in complex with target DNA, elucidating the pre-integration target DNA capture and post-catalytic strand transfer intermediates of the retroviral integration process. The cleft between IN dimers within the intasome accommodates chromosomal DNA in a severely bent conformation, allowing widely spaced IN active sites to access the scissile phosphodiester bonds. Our results resolve the structural basis for retroviral DNA integration and provide a framework for the design of INs with altered target sequences.

Feline leukemia virus integrase and capsid packaging functions do not change the insertion profile of standard Moloney retroviral vectors

Adverse events linked to perturbations of cellular genes by vector insertion reported in gene therapy trials and animal models have prompted attempts to better understand the mechanisms directing viral vector integration. The integration profiles of vectors based on MLV, ASLV, SIV, and HIV have all been shown to be non-random, and novel vectors with a safer integration pattern have been sought. Recently we developed a producer cell line called CatPac that packages standard MoMLV vectors with FeLV gag, pol and env gene products. We now report the integration profile of this vector, asking if the FeLV integrase and capsid proteins could modify the MoMLV integration profile, potentially resulting in a less genotoxic pattern. We transduced rhesus macaque CD34+ hematopoietic progenitor cells with CatPac or standard MoMLV vectors, and determined their integration profile by LAM-PCR. We obtained 184 and 175 unique integration sites (IS) respectively for CatPac and standard MoMLV vectors, and these were compared to 10 000 in silico-generated random IS. The integration profile for CatPac vector was similar to MoMLV and equally non-random, with a propensity for integration near transcription start sites and in highly dense gene regions. We found an IS for CatPac vector localized 715 nucleotides upstream of LMO-2, the gene involved in the ALL developed by X-SCID patients treated via gene therapy using MoMLV vectors. In conclusion, we found that replacement of MoMLV env, gag, and pol gene products with FeLV did not alter the basic integration profile. Thus there appears to be no safety advantage for this packaging system. However, considering the stability and efficacy of CatPac vectors, further development is warranted, utilizing potentially safer vector backbones, for instance those with a SIN configuration.

HIV-1 Integrase-DNA Recognition Mechanisms

Integration of a reverse transcribed DNA copy of the HIV viral genome into the host chromosome is essential for virus replication. This process is catalyzed by the virally encoded protein integrase. The catalytic activities, which involve DNA cutting and joining steps, have been recapitulated in vitro using recombinant integrase and synthetic DNA substrates. Biochemical and biophysical studies of these model reactions have been pivotal in advancing our understanding of mechanistic details for how IN interacts with viral and target DNAs, and are the focus of the present review.

A nonradioactive plate-based assay for stimulators of nonspecific DNA nicking by HIV-1 integrase and other nucleases

Retroviral integrase enzymes have a nonspecific endonuclease activity that is stimulated by certain compounds, suggesting that integrase could be manipulated to damage viral DNA. To identify integrase stimulator (IS) compounds as potential antiviral agents, we have developed a nonradioactive assay that is suitable for high-throughput screening. The assay uses a 49-mer oligonucleotide that is 5'-labeled with a fluorophore, 3'-tagged with a quencher, and designed to form a hairpin that mimics radioactive double-stranded substrates in gel-based nicking assays. Reactions in 384-well plates are analyzed on a real-time PCR machine after a single heat denaturation and subsequent cooling to a point between the melting temperatures of unnicked substrate and nicked products (no cycling is required). Under these conditions, unnicked DNA reforms the hairpin and quenches fluorescence, whereas completely nicked DNA yields a large signal. The assay was linear with time, stimulator concentration, and amount of integrase, and 20% concentrations of the solvent used for many chemical libraries did not interfere with the assay. The assay had an excellent Z' factor, and it reliably detected known IS compounds. This assay, which is adaptable to other nonspecific nucleases, will be useful for identifying additional IS compounds to develop the novel antiviral strategy of stimulating integrase to destroy retroviral DNA.

Structural basis for functional tetramerization of lentiviral integrase

Experimental evidence suggests that a tetramer of integrase (IN) is the protagonist of the concerted strand transfer reaction, whereby both ends of retroviral DNA are inserted into a host cell chromosome. Herein we present two crystal structures containing the N-terminal and the catalytic core domains of maedi-visna virus IN in complex with the IN binding domain of the common lentiviral integration co-factor LEDGF. The structures reveal that the dimer-of-dimers architecture of the IN tetramer is stabilized by swapping N-terminal domains between the inner pair of monomers poised to execute catalytic function. Comparison of four independent IN tetramers in our crystal structures elucidate the basis for the closure of the highly flexible dimer-dimer interface, allowing us to model how a pair of active sites become situated for concerted integration. Using a range of complementary approaches, we demonstrate that the dimer-dimer interface is essential for HIV-1 IN tetramerization, concerted integration in vitro, and virus infectivity. Our structures moreover highlight adaptable changes at the interfaces of individual IN dimers that allow divergent lentiviruses to utilize a highly-conserved, common integration co-factor.

Identifying amino acid residues that contribute to the cellular-DNA binding site on retroviral integrase

Although retroviral integrase specifically trims the ends of viral DNA and inserts these ends into any sequence in cellular DNA, little information is available to explain how integrase distinguishes between its two DNA substrates. We recently described novel integrase mutants that were improved for specific nicking of viral DNA but impaired at joining these ends into nonviral DNA. An acidic or bulky substitution at one particular residue was critical for this activity profile, and the prototypic protein--Rous sarcoma virus integrase with an S124D substitution--was defective at nonspecifically binding DNA. We have now characterized 19 (including 16 new) mutants that contain one or more aspartic acid substitutions at residues that extend over the surface of the protein and might participate with residue 124 in binding cellular DNA. In particular, every mutant with an aspartate substitution at residue 98 or 128, similar to the original S124D protein, showed improved specific nicking of viral DNA but disturbed nonspecific nicking of nonviral DNA. These data describe a probable cellular-DNA binding platform that involves at least 5 amino acids, in the following order of importance: 124>128>(98, 125)>123. These experimental data are vital for new models of integrase and will contribute to identifying targets for the next generation of integrase inhibitors.

Site-specific integration of retroviral DNA in human cells using fusion proteins consisting of human immunodeficiency virus type 1 integrase and the designed polydactyl zinc-finger protein E2C

During the life cycle of retroviruses, establishment of a productive infection requires stable joining of a DNA copy of the viral RNA genome into host cell chromosomes. Retroviruses are thus promising vectors for the efficient and stable delivery of genes in therapeutic protocols. Integration of retroviral DNA is catalyzed by the viral enzyme integrase (IN), and one salient feature of retroviral DNA integration is its lack of specificity, as many chromosomal sites can serve as targets for integration. Despite the promise for success in the clinic, one major drawback of the retrovirus-based vector is that any unintended insertion events from the therapy can potentially lead to deleterious effects in patients, as demonstrated by the development of malignancies in both animal and human studies. One approach to directing integration into predetermined DNA sites is fusing IN to a sequence-specific DNA-binding protein, which results in a bias of integration near the recognition site of the fusion partner. Encouraging results have been generated in vitro and in vivo using fusion protein constructs of human immunodeficiency virus type 1 IN and E2C, a designed polydactyl zinc-finger protein that specifically recognizes an 18-base pair DNA sequence. This review focuses on the method for preparing infectious virions containing the IN fusion proteins and on the quantitative PCR assays for determining integration site specificity. Efforts to engineer IN to recognize specific target DNA sequences within the genome may lead to development of effective retroviral vectors that can safely deliver gene-based therapeutics in a clinical setting.

Natural variation of HIV-1 group M integrase: implications for a new class of antiretroviral inhibitors

HIV-1 integrase is the third enzymatic target of antiretroviral (ARV) therapy. However, few data have been published on the distribution of naturally occurring amino acid variation in this enzyme. We therefore characterized the distribution of integrase variants among more than 1,800 published group M HIV-1 isolates from more than 1,500 integrase inhibitor (INI)-naïve individuals. Polymorphism rates equal or above 0.5% were found for 34% of the central core domain positions, 42% of the C-terminal domain positions, and 50% of the N-terminal domain positions. Among 727 ARV-naïve individuals in whom the complete pol gene was sequenced, integrase displayed significantly decreased inter- and intra-subtype diversity and a lower Shannon's entropy than protease or RT. All primary INI-resistance mutations with the exception of E157Q--which was present in 1.1% of sequences--were nonpolymorphic. Several accessory INI-resistance mutations including L74M, T97A, V151I, G163R, and S230N were also polymorphic with polymorphism rates ranging between 0.5% to 2.0%.

Integration site preference of xenotropic murine leukemia virus-related virus, a new human retrovirus associated with prostate cancer

Xenotropic murine leukemia virus-related virus (XMRV) is a new human gammaretrovirus identified in prostate cancer tissue from patients homozygous for a reduced-activity variant of the antiviral enzyme RNase L. Neither a casual relationship between XMRV infection and prostate cancer nor a mechanism of tumorigenesis has been established. To determine the integration site preferences of XMRV and the potential risk of proviral insertional mutagenesis, we carried out a genome-wide analysis of viral integration sites in the prostate cell line DU145 after an acute XMRV infection and compared the integration site pattern of XMRV with those found for murine leukemia virus and two human retroviruses, human immunodeficiency virus type 1 and human T-cell leukemia virus type 1. Among all retroviruses analyzed, XMRV has the strongest preference for transcription start sites, CpG islands, DNase-hypersensitive sites, and gene-dense regions; all are features frequently associated with structurally open transcription regulatory regions of a chromosome. Analyses of XMRV integration sites in tissues from prostate cancer patients found a similar preference for the aforementioned chromosomal features. Additionally, XMRV integration sites in cancer tissues were associated with cancer breakpoints, common fragile sites, microRNA, and cancer-related genes, suggesting a selection process that favors certain chromosomal integration sites. In both acutely infected cells and cancer tissues, no common integration site was detected within or near proto-oncogenes or tumor suppressor genes. These results are consistent with a model in which XMRV may contribute to tumorigenicity via a paracrine mechanism.

Inhibition of human immunodeficiency virus type 1 concerted integration by strand transfer inhibitors which recognize a transient structural intermediate

Human immunodeficiency virus type 1 (HIV-1) integrase (IN) inserts the viral DNA genome into host chromosomes. Here, by native agarose gel electrophoresis, using recombinant IN with a blunt-ended viral DNA substrate, we identified the synaptic complex (SC), a transient early intermediate in the integration pathway. The SC consists of two donor ends juxtaposed by IN noncovalently. The DNA ends within the SC were minimally processed (~15%). In a time-dependent manner, the SC associated with target DNA and progressed to the strand transfer complex (STC), the nucleoprotein product of concerted integration. In the STC, the two viral DNA ends are covalently attached to target and remain associated with IN. The diketo acid inhibitors and their analogs effectively inhibit HIV-1 replication by preventing integration in vivo. Strand transfer inhibitors L-870,810, L-870,812, and L-841,411, at low nM concentrations, effectively inhibited the concerted integration of viral DNA donor in vitro. The inhibitors, in a concentration-dependent manner, bound to IN within the SC and thereby blocked the docking onto target DNA, which thus prevented the formation of the STC. Although 3'-OH recessed donor efficiently formed the STC, reactions proceeding with this substrate exhibited marked resistance to the presence of inhibitor, requiring significantly higher concentrations for effective inhibition of all strand transfer products. These results suggest that binding of inhibitor to the SC occurs prior to, during, or immediately after 3'-OH processing. It follows that the IN-viral DNA complex is "trapped" by the strand transfer inhibitors via a transient intermediate within the cytoplasmic preintegration complex.

Targeted Sleeping Beauty transposition in human cells

Transposons are natural gene delivery vehicles. The Sleeping Beauty (SB) transposon shows efficient transposition and long-term transgene expression in the cells of vertebrates including humans. SB transposition into chromosomal DNA occurs in a fairly random manner. This is clearly not desirable in human gene therapeutic applications because there are potential genotoxic effects associated with transposon integration. In this study we set out to manipulate the selection of SB's target sites for targeted transposition into predetermined chromosomal regions. We evaluated experimental strategies based on engineered proteins composed of DNA-binding domains fused to (i) the transposase; (ii) another protein that binds to a specific DNA sequence within the transposable element; and (iii) another protein that interacts with the transposase. We demonstrated targeted transposition into endogenous matrix attachment regions (MARs) and a chromosomally integrated tetracycline response element (TRE) in cultured human cells, using targeting proteins that bind to the transposon DNA. An approach based on interactions between the transposase and a targeting protein containing the N-terminal protein interaction domain of SB was found to enable an approximately 10(7)-fold enrichment of transgene insertion at a desired locus. Our experiments provide proof-of-principle for targeted chromosomal transposition of an otherwise randomly integrating transposon. Targeted transposition can be a powerful technology for safe transgene integration in human therapeutic applications.

Retroviral integrases that are improved for processing but impaired for joining

Retroviral integrase specifically trims (or processes) the ends of retroviral DNA, then inserts (or joins) these ends into cellular DNA nonspecifically. We previously showed that Rous sarcoma virus integrase with a serine-to-aspartate substitution at amino acid 124 was markedly improved for processing but dramatically impaired for joining, making it the first mutant to separate the activities of integrase in this way. We now show that placing glutamic acid at this residue has the same effect, whereas asparagine or glutamine, which resemble aspartate and glutamate but without the negatively charged acid group, improved processing and impaired joining to a lesser extent. Placing aspartic acid at either of the adjacent residues 123 or 125 also had an intermediate effect. Thus, the charge, structure, and position of the substitution all contribute to the properties of the S124D protein. Infectivity of virions containing these mutations paralleled the in vitro findings, with substitutions having the greatest effect on joining completely blocking replication. Additional studies indicated the replication-defective viruses were blocked at integration and that the S124D protein is impaired at binding nonviral DNA. These functional, biochemical, and genetic data implicate this particular integrase residue as a key part of the binding site for cellular DNA.

Division of labor within human immunodeficiency virus integrase complexes: determinants of catalysis and target DNA capture

Following the completion of reverse transcription, the human immunodeficiency virus integrase (IN) enzyme covalently links the viral cDNA to a host cell chromosome. An IN multimer carries out this reaction, but the roles of individual monomers within the complex are mostly unknown. Here we analyzed the distribution of functions for target DNA capture and catalysis within the IN multimer. We used forced complementation between pairs of IN deletion derivatives in vitro as a tool for probing cis-trans relationships and analyzed amino acid substitutions affecting either catalysis or target site selection within these complementing complexes. This allowed the demonstration that the IN variant contributing the active catalytic domain was also responsible for recognition of the integration target DNA. We were further able to establish that a single monomer is responsible for both functions by use of assay mixtures containing three different IN genotypes. These data specify the ligands bound at the catalytically relevant IN monomer and allow more-specific modeling of the mechanism of inhibitors that also bind this surface of IN.

A substitution in rous sarcoma virus integrase that separates its two biologically relevant enzymatic activities

Retroviral integrase prepares viral DNA for integration by removing 2 nucleotides from each end of unintegrated DNA in a reaction referred to as processing. However, it has been known since the processing assay was first described that avian integrases frequently nick 3 nucleotides, as well as 2 nucleotides, from viral DNA ends when reaction mixtures contain Mn2+. We now report that specificity for the biologically relevant "-2" site is enhanced when the serine at amino acid 124 of Rous sarcoma virus (RSV) integrase is replaced by alanine, valine, glycine, lysine, or aspartate. The protein with a serine-to-aspartate substitution exhibited especially high fidelity for the correct site, as evidenced by a ratio of -2 nicks to -3 nicks that was more than 40-fold greater than that for the wild-type enzyme in reactions with Mn2+. Even with Mg2+, the substituted proteins exhibited greater specificity than the wild type, especially the S124D protein. Moreover, this protein was more efficient than the wild type at processing viral DNA ends. Unexpectedly, however, the S124D protein was significantly impaired at catalyzing the insertion of viral DNA ends in reactions with Mn2+ and joining was undetectable in reactions with Mg2+. Thus, the S124D protein has separated the processing and joining activities of integrase. Similar results were found for human immunodeficiency virus integrase with the analogous substitution. No proteins with comparable properties have been described. Moreover, RSV virions containing integrase with the S124D mutation were unable to replicate in cell cultures. Together, these data suggest that integrase has evolved to have submaximal processing activity so that it can also catalyze DNA joining.

Retroviral DNA integration--mechanism and consequences

Integration of retroviral cDNA into the host cell chromosome is an essential step in its replication. This process is catalyzed by the retroviral integrase protein, which is conserved among retroviruses and retrotransposons. Integrase binds viral and host DNA in a complex, called the preintegration complex (PIC), with other viral and cellular proteins. While the PIC is capable of directing integration of the viral DNA into any chromosomal location, different retroviruses have clear preferences for integration in or near particular chromosomal features. The determinants of integration site selection are under investigation but may include retrovirus-specific interactions between integrase and tethering factors bound to the host cell chromosomes. Research into the mechanisms of retroviral integration site selection has shed light on the phenomena of insertional mutagenesis and viral latency.

Cross-packaging of human immunodeficiency virus type 1 vector RNA by spleen necrosis virus proteins: construction of a new generation of spleen necrosis virus-derived retroviral vectors

The ability of the nonlentiviral retrovirus spleen necrosis virus (SNV) to cross-package the genomic RNA of the distantly related human immunodeficiency virus type 1 (HIV-1) and vice versa was analyzed. Such a model may allow us to further study HIV-1 replication and pathogenesis, as well as to develop safe gene therapy vectors. Our results suggest that SNV can cross-package HIV-1 genomic RNA but with lower efficiency than HIV-1 proteins. However, HIV-1-specific proteins were unable to cross-package SNV RNA. We also constructed SNV-based gag-pol chimeric variants by replacing the SNV integrase with the HIV-1 integrase, based on multiple sequence alignments and domain analyses. These analyses revealed that there are conserved domains in all retroviral integrase open reading frames (orf), despite the divergence in the primary sequences. The transcomplementation assays suggested that SNV proteins recognized one of the chimeric variants. This demonstrated that HIV-1 integrase is functional in the SNV gag-pol orf with a lower transduction efficiency, utilizing homologous (SNV) RNA, as well as the heterologous vector RNA of HIV-1. These findings suggest that homology in the conserved sequences of the integrase protein may not be fully competent in the replacement of protein(s) from one retrovirus to another, and there are likely several other factors involved in each of the steps related to replication, integration, and infection. However, further studies to dissect the gag-pol region will be critical for understanding the mechanisms involved in the cleavage of reverse transcriptase, RNase H, and integrase. These studies should provide further insight into the design and development of novel molecular approaches to block HIV-1 replication and to construct a new generation of SNV-based vectors.