Actin from Saccharomyces cerevisiae

Ultrastructural analysis in yeast reveals a meiosis-specific actin-containing nuclear bundle

Actin polymerises to form filaments/cables for motility, transport, and the structural framework in a cell. Recent studies show that actin polymers are present not only in the cytoplasm but also in the nuclei of vertebrate cells. Here, we show, by electron microscopic observation with rapid freezing and high-pressure freezing, a unique bundled structure containing actin in the nuclei of budding yeast cells undergoing meiosis. The nuclear bundle during meiosis consists of multiple filaments with a rectangular lattice arrangement, often showing a feather-like appearance. The bundle was immunolabelled with an anti-actin antibody and was sensitive to an actin-depolymerising drug. Similar to cytoplasmic bundles, nuclear bundles are rarely seen in premeiotic cells and spores and are induced during meiotic prophase-I. The formation of the nuclear bundle is independent of DNA double-stranded breaks. We speculate that nuclear bundles containing actin play a role in nuclear events during meiotic prophase I.

Mutant profilin suppresses mutant actin-dependent mitochondrial phenotype in Saccharomyces cerevisiae

In the Saccharomyces cerevisiae actin-profilin interface, Ala(167) of the actin barbed end W-loop and His(372) near the C terminus form a clamp around a profilin segment containing residue Arg(81) and Tyr(79). Modeling suggests that altering steric packing in this interface regulates actin activity. An actin A167E mutation could increase interface crowding and alter actin regulation, and A167E does cause growth defects and mitochondrial dysfunction. We assessed whether a profilin Y79S mutation with its decreased mass could compensate for actin A167E crowding and rescue the mutant phenotype. Y79S profilin alone caused no growth defect in WT actin cells under standard conditions in rich medium and rescued the mitochondrial phenotype resulting from both the A167E and H372R actin mutations in vivo consistent with our model. Rescue did not result from effects of profilin on actin nucleotide exchange or direct effects of profilin on actin polymerization. Polymerization of A167E actin was less stimulated by formin Bni1 FH1-FH2 fragment than was WT actin. Addition of WT profilin to mixtures of A167E actin and formin fragment significantly altered polymerization kinetics from hyperbolic to a decidedly more sigmoidal behavior. Substitution of Y79S profilin in this system produced A167E behavior nearly identical to that of WT actin. A167E actin caused more dynamic actin cable behavior in vivo than observed with WT actin. Introduction of Y79S restored cable movement to a more normal phenotype. Our studies implicate the importance of the actin-profilin interface for formin-dependent actin and point to the involvement of formin and profilin in the maintenance of mitochondrial integrity and function.

A potential yeast actin allosteric conduit dependent on hydrophobic core residues val-76 and trp-79

Intramolecular allosteric interactions responsible for actin conformational regulation are largely unknown. Previous work demonstrated that replacing yeast actin Val-76 with muscle actin Ile caused decreased nucleotide exchange. Residue 76 abuts Trp-79 in a six-residue linear array beginning with Lys-118 on the surface and ending with His-73 in the nucleotide cleft. To test if altering the degree of packing of these two residues would affect actin dynamics, we constructed V76I, W79F, and W79Y single mutants as well as the Ile-76/Phe-79 and Ile-76/Tyr-79 double mutants. Tyr or Phe should decrease crowding and increase protein flexibility. Subsequent introduction of Ile should restore packing and dampen changes. All mutants showed decreased growth in liquid medium. W79Y alone was severely osmosensitive and exhibited vacuole abnormalities. Both properties were rescued by Ile-76. Phe-79 or Tyr decreased the thermostability of actin and increased its nucleotide exchange rate. These effects, generally greater for Tyr than for Phe, were reversed by introduction of Ile-76. HD exchange showed that the mutations caused propagated conformational changes to all four subdomains. Based on results from phosphate release and light-scattering assays, single mutations affected polymerization in the order of Ile, Phe, and Tyr from least to most. Introduction of Ile-76 partially rescued the polymerization defects caused by either Tyr-79 or Phe-79. Thus, alterations in crowding of the 76-79 residue pair can strongly affect actin conformation and behavior, and these results support the theory that the amino acid array in which they are located may play a central role in actin regulation.

Meiotic telomere clustering requires actin for its formation and cohesin for its resolution

In diploid organisms, meiosis reduces the chromosome number by half during the formation of haploid gametes. During meiotic prophase, telomeres transiently cluster at a limited sector of the nuclear envelope (bouquet stage) near the spindle pole body (SPB). Cohesin is a multisubunit complex that contributes to chromosome segregation in meiosis I and II divisions. In yeast meiosis, deficiency for Rec8 cohesin subunit induces telomere clustering to persist, whereas telomere cluster-SPB colocalization is defective. These defects are rescued by expressing the mitotic cohesin Scc1 in rec8delta meiosis, whereas bouquet-stage exit is independent of Cdc5 pololike kinase. An analysis of living Saccharomyces cerevisiae meiocytes revealed highly mobile telomeres from leptotene up to pachytene, with telomeres experiencing an actin- but not microtubule-dependent constraint of mobility during the bouquet stage. Our results suggest that cohesin is required for exit from actin polymerization-dependent telomere clustering and for linking the SPB to the telomere cluster in synaptic meiosis.

Hierarchy of protein assembly at the vertex ring domain for yeast vacuole docking and fusion

Vacuole tethering, docking, and fusion proteins assemble into a "vertex ring" around the apposed membranes of tethered vacuoles before catalyzing fusion. Inhibitors of the fusion reaction selectively interrupt protein assembly into the vertex ring, establishing a causal assembly hierarchy: (a) The Rab GTPase Ypt7p mediates vacuole tethering and forms the initial vertex ring, independent of t-SNAREs or actin; (b) F-actin disassembly and GTP-bound Ypt7p direct the localization of other fusion factors; (c) The t-SNAREs Vam3p and Vam7p regulate each other's vertex enrichment, but do not affect Ypt7p localization. The v-SNARE Vti1p is enriched at vertices by a distinct pathway that is independent of the t-SNAREs, whereas both t-SNAREs will localize to vertices when trans-pairing of SNAREs is blocked. Thus, trans-SNARE pairing is not required for SNARE vertex enrichment; and (d) The t-SNAREs regulate the vertex enrichment of both G-actin and the Ypt7p effector complex for homotypic fusion and vacuole protein sorting (HOPS). In accord with this hierarchy concept, the HOPS complex, at the end of the vertex assembly hierarchy, is most enriched at those vertices with abundant Ypt7p, which is at the start of the hierarchy. Our findings provide a unique view of the functional relationships between GTPases, SNAREs, and actin in membrane fusion.

Interaction of a Dictyostelium member of the plastin/fimbrin family with actin filaments and actin-myosin complexes

A protein purified from cytoskeletal fractions of Dictyostelium discoideum proved to be a member of the fimbrin/plastin family of actin-bundling proteins. Like other family members, this Ca(2+)-inhibited 67-kDa protein contains two EF hands followed by two actin-binding sites of the alpha-actinin/beta-spectrin type. Dd plastin interacted selectively with actin isoforms: it bound to D. discoideum actin and to beta/gamma-actin from bovine spleen but not to alpha-actin from rabbit skeletal muscle. Immunofluorescence labeling of growth phase cells showed accumulation of Dd plastin in cortical structures associated with cell surface extensions. In the elongated, streaming cells of the early aggregation stage, Dd plastin was enriched in the front regions. To examine how the bundled actin filaments behave in myosin II-driven motility, complexes of F-actin and Dd plastin were bound to immobilized heavy meromyosin, and motility was started by photoactivating caged ATP. Actin filaments were immediately propelled out of bundles or even larger aggregates and moved on the myosin as separate filaments. This result shows that myosin can disperse an actin network when it acts as a motor and sheds light on the dynamics of protein-protein interactions in the cortex of a motile cell where myosin II and Dd plastin are simultaneously present.

Actin filaments in yeast are unstable in the absence of capping protein or fimbrin

Many actin-binding proteins affect filament assembly in vitro and localize with actin in vivo, but how their molecular actions contribute to filament assembly in vivo is not understood well. We report here that capping protein (CP) and fimbrin are both important for actin filament assembly in vivo in Saccharomyces cerevisiae, based on finding decreased actin filament assembly in CP and fimbrin mutants. We have also identified mutations in actin that enhance the CP phenotype and find that those mutants also have decreased actin filament assembly in vivo. In vitro, actin purified from some of these mutants is defective in polymerization or binding fimbrin. These findings support the conclusion that CP acts to stabilize actin filaments in vivo. This conclusion is particularly remarkable because it is the opposite of the conclusion drawn from recent studies in Dictyostelium (Hug, C., P.Y. Jay, I. Reddy, J.G. McNally, P.C. Bridgman, E.L. Elson, and J.A. Cooper. 1995. Cell. 81:591-600). In addition, we find that the unpolymerized pool of actin in yeast is very small relative to that found in higher cells, which suggests that actin filament assembly is less dynamic in yeast than higher cells.

Yeast mitochondria contain ATP-sensitive, reversible actin-binding activity

Sedimentation assays were used to demonstrate and characterize binding of isolated yeast mitochondria to phalloidin-stabilized yeast F-actin. These actin-mitochondrial interactions are ATP sensitive, saturable, reversible, and do not depend upon mitochondrial membrane potential. Protease digestion of mitochondrial outer membrane proteins or saturation of myosin-binding sites on F-actin with the S1 subfragment of skeletal myosin block binding. These observations indicate that a protein (or proteins) on the mitochondrial surface mediates ATP-sensitive, reversible binding of mitochondria to the lateral surface of microfilaments. Actin copurifies with mitochondria during subcellular fractionation and is released from the organelle upon treatment with ATP. Thus, actin-mitochondrial interactions resembling those observed in vitro may also exist in intact yeast cells. Finally, a yeast mutant bearing a temperature-sensitive mutation in the actin-encoding ACT1 gene (act1-3) displays temperature-dependent defects in transfer of mitochondria from mother cells to newly developed buds during yeast cell mitosis.

Actin structure and function: roles in mitochondrial organization and morphogenesis in budding yeast and identification of the phalloidin-binding site

To further elucidate the functions of actin in budding yeast and to relate actin structure to specific roles and interactions in vivo, we determined the phenotypes caused by 13 charged-to-alanine mutations isolated previously in the single Saccharomyces cerevisiae actin gene. Defects in actin organization, morphogenesis, budding pattern, chitin deposition, septation, nuclear segregation, and mitochondrial organization were observed. In wild-type cells, mitochondria were found to be aligned along actin cables. Many of the amino acid substitutions that had the most severe effects on mitochondrial organization are located under the myosin "footprint" on the actin monomer, suggesting that actin-myosin interactions might underlie mitochondrial organization in yeast. In addition, one mutant (act1-129; R177A, D179A) produced an actin that assembled into cables and patches that could be visualized by anti-actin immunofluorescence in situ and that assembled into microfilaments of normal appearance in vitro as judged by electron microscopy but which could not be labeled by rhodamine-phalloidin in situ or in vitro. Rhodamine-phalloidin could label actin filaments assembled from all of the other mutant actins, including one (act1-119; R116A, E117A, K118A) that is altered at a residue (E117) that can be chemically cross-linked to phalloidin. The implication of residues R177 and/or D179 in phalloidin binding is in close agreement with a recently reported molecular model in which the phalloidin-binding site is proposed to be at the junction of two or three actin monomers in the filament.

SAC1p is an integral membrane protein that influences the cellular requirement for phospholipid transfer protein function and inositol in yeast

Mutations in the SAC1 gene exhibit allele-specific genetic interactions with yeast actin structural gene defects and effect a bypass of the cellular requirement for the yeast phosphatidylinositol/phosphatidylcholine transfer protein (SEC14p), a protein whose function is essential for sustained Golgi secretory function. We report that SAC1p is an integral membrane protein that localizes to the yeast Golgi complex and to the yeast ER, but does not exhibit a detectable association with the bulk of the yeast F-actin cytoskeleton. The data also indicate that the profound in vivo effects on Golgi secretory function and the organization of the actin cytoskeleton observed in sac1 mutants result from loss of SAC1p function. This cosuppression of actin and SEC14p defects is a unique feature of sac1 alleles as mutations in other SAC genes that result in a suppression of actin defects do not result in phenotypic suppression of SEC14p defects. Finally, we report that sac1 mutants also exhibit a specific inositol auxotrophy that is not exhibited by the other sac mutant strains. This sac1-associated inositol auxotrophy is not manifested by measurable defects in de novo inositol biosynthesis, nor is it the result of some obvious defect in the ability of sac1 mutants to utilize inositol for phosphatidylinositol biosynthesis. Thus, sac1 mutants represent a novel class of inositol auxotroph in that these mutants appear to require elevated levels of inositol for growth. On the basis of the collective data, we suggest that SAC1p dysfunction exerts its pleiotropic effects on yeast Golgi function, the organization of the actin cytoskeleton, and the cellular requirement for inositol, through altered metabolism of inositol glycerophospholipids.

Molecular genetics of actin function

Images

Yeast actin filaments display ATP-dependent sliding movement over surfaces coated with rabbit muscle myosin

The yeast Saccharomyces cerevisiae has been used to study the function of components of the actin cytoskeleton in vivo, mainly because it is easy to derive and characterize mutations affecting these proteins. In contrast, biochemical studies have generally used proteins derived from higher eukaryotes. We have devised a simple procedure to prepare, in high yield, homogeneous native actin from wild-type and act1 mutant yeast. Using intensified video fluorescence microscopy, we found that actin filaments polymerized from these preparations exhibit ATP-dependent sliding movement over surfaces coated with rabbit skeletal muscle myosin. The rates of sliding movement of the wild-type and mutant yeast actins were each about half that of rabbit skeletal muscle actin under similar conditions. We conclude that over the large evolutionary distance between yeast and mammals there has been significant conservation of actin function, specifically the ability to be moved by interaction with myosin.

Spermidine or spermine is essential for the aerobic growth of Saccharomyces cerevisiae

A null mutation in the SPE2 gene of Saccharomyces cerevisiae, encoding S-adenosylmethionine decarboxylase, results in cells with no detectable S-adenosylmethionine decarboxylase, spermidine, and spermine. This mutant has an absolute requirement for spermidine or spermine for growth; this requirement is not satisfied by putrescine. Polyamine-depleted cells show a number of microscopic abnormalities that are similar to those reported for several cell division cycle (cdc) and actin mutants. These include a striking increase in cell size, a marked decrease in budding, accumulation of vesicle-like bodies, absence of specific localization of chitin-like material, and abnormal distribution of actin-like material. The absolute requirement for polyamines for growth and the microscopic abnormalities are not seen if the cultures are grown under anaerobic conditions.

A polypeptide of 59 kDa is associated with bundles of cytoplasmic filaments in Neurospora crassa

Complex arrangements of filamentous structures have been isolated from vegetative cells of the fungus Neurospora crassa. They were enriched by differential centrifugation and purified by permeation chromatography. The filamentous structures are made up of units of 8-10 nm diameter and were isolated in bundles of up to six to nine units. The main constituent of these structures is a polypeptide with an apparent molecular mass of 59 kDa (P59Nc), which represents 4-5% of the total N. crassa proteins. The filamentous structures are cold-stable and are not affected by high-ionic-strength solutions or by the presence of 10 mM-EDTA or 1% (w/v) Triton X-100; they were disassembled by raising the pH of the solution or by using Tris-based buffers. The disassembled form assembled into structures sedimentable at 105,000 g after dialysis against the isolation buffer. The sedimentable structures were organized in the form of regular aggregates of 42-45 nm polypeptides and reacted weakly with anti-IFA, a monoclonal antibody which recognizes an epitope common to many of the higher-eukaryote intermediate-filament polypeptides. Immunofluorescence examination of wall-digested hyphae of N. crassa using affinity-purified antibodies prepared against P59Nc showed immunostaining of abundant filamentous and dot-shaped structures distributed in the cytoplasm.

Lamin A, lamin B, and lamin B receptor analogues in yeast

Previous studies have shown that turkey erythrocyte lamin B is anchored to the nuclear envelope via a 58-kD integral membrane protein termed p58 or lamin B receptor (Worman H. J., J. Yuan, G. Blobel, and S. D. Georgatos. 1988. Proc. Natl. Acad. Sci. USA. 85:8531-8534). We now identify a p58 analogue in the yeast Saccharomyces cerevisiae. Turkey erythrocyte lamin B binds to yeast urea-extracted nuclear envelopes with high affinity, associating predominantly with a 58-kD polypeptide. This yeast polypeptide is recognized by polyclonal antibodies against turkey p58, partitions entirely with the nuclear fraction, remains membrane bound after urea extraction of the nuclear envelopes, and is structurally similar to turkey p58 by peptide mapping criteria. Using polyclonal antibodies against turkey erythrocyte lamins A and B, we also identify two yeast lamin forms. The yeast lamin B analogue has a molecular mass of 66 kD and is structurally related to erythrocyte lamin B. Moreover, the yeast lamin B analogue partitions exclusively with the nuclear envelope fraction, is quantitatively removed from the envelopes by urea extraction, and binds to turkey lamin A and vimentin. As many higher eukaryotic lamin B forms, the yeast analogue is chemically heterogeneous comprising two serologically related species with different charge characteristics. Antibodies against turkey lamin A detect a 74-kD yeast protein, slightly larger than the turkey lamin A. It is more abundant than the yeast lamin B analogue and partitions between a soluble cytoplasmic fraction and a nuclear envelope fraction. The yeast lamin A analogue can be extracted from the nuclear envelope by urea, shows structural similarity to turkey and rat lamin A, and binds to isolated turkey lamin B. These data indicate that analogues of typical nuclear lamina components (lamins A and B, as well as lamin B receptor) are present in yeast and behave as their vertebrate counterparts.

Purification of tropomyosin from Saccharomyces cerevisiae and identification of related proteins in Schizosaccharomyces and Physarum

Tropomyosin is a key component of the contractile systems found in muscle and nonmuscle cells of higher eukaryotes. Based on properties common to all tropomyosins, we have purified a protein from Saccharomyces cerevisiae that resembles tropomyosins from higher cells. The yeast protein remains soluble after heat treatment at 90 degrees C, has an apparent polypeptide molecular weight of 33,000, an isoelectric point of 4.5, a Stokes radius of 3.5 nm, and a sedimentation coefficient of 2.6 S. It binds F-actin in a Mg2+-dependent, KCl-modulated manner, up to a stoichiometry of about 1 polypeptide per 3.0 actin monomers. In all these properties it is very similar to tropomyosins from higher cells. Antigen-affinity-purified antibodies specifically recognize the Mr 33,000 polypeptide among total yeast proteins and crossreact with bovine brain tropomyosin. In addition, the antibodies specifically crossreact with heat-stable Mr 33,000 polypeptides in extracts of Schizosaccharomyces pombe and Physarum polycephalum. Our detection of tropomyosin in lower eukaryotes suggests that they might have contractile systems very similar to those found in higher organisms.

Yeast actin-binding proteins: evidence for a role in morphogenesis

Three yeast actin-binding proteins were identified using yeast actin filaments as an affinity matrix. One protein appears to be a yeast myosin heavy chain; it is dissociated from actin filaments by ATP, it is similar in size (200 kD) to other myosins, and antibodies directed against Dictyostelium myosin heavy chain bind to it. Immunofluorescence experiments show that a second actin-binding protein (67 kD) colocalizes in vivo with both cytoplasmic actin cables and cortical actin patches, the only identifiable actin structures in yeast. The cortical actin patches are concentrated at growing surfaces of the yeast cell where they might play a role in membrane and cell wall insertion, and the third actin-binding protein (85 kD) is only detected in association with these structures. This 85-kD protein is therefore a candidate for a determinant of growth sites. The in vivo role of this protein was tested by overproduction; this overproduction causes a reorganization of the actin cytoskeleton which in turn dramatically affects the budding pattern and spatial growth organization of the yeast cell.

Functions of microtubules in the Saccharomyces cerevisiae cell cycle

We used the inhibitor nocodazole in conjunction with immunofluorescence and electron microscopy to investigate microtubule function in the yeast cell cycle. Under appropriate conditions, this drug produced a rapid and essentially complete disassembly of cytoplasmic and intranuclear microtubules, accompanied by a rapid and essentially complete block of cellular and nuclear division. These effects were similar to, but more profound than, the effects of the related drug methyl benzimidazole carbamate (MBC). In the nocodazole-treated cells, the selection of nonrandom budding sites, the formation of chitin rings and rings of 10-nm filaments at those sites, bud emergence, differential bud enlargement, and apical bud growth appeared to proceed normally, and the intracellular distribution of actin was not detectably perturbed. Thus, the cytoplasmic microtubules are apparently not essential for the establishment of cell polarity and the localization of cell-surface growth. In contrast, nocodazole profoundly affected the behavior of the nucleus. Although spindle-pole bodies (SPBs) could duplicate in the absence of microtubules, SPB separation was blocked. Moreover, complete spindles present at the beginning of drug treatment appeared to collapse, drawing the opposed SPBs and associated nuclear envelope close together. Nuclei did not migrate to the mother-bud necks in nocodazole-treated cells, although nuclei that had reached the necks before drug treatment remained there. Moreover, the double SPBs in arrested cells were often not oriented toward the budding sites, in contrast to the situation in normal cells. Thus, microtubules (cytoplasmic, intranuclear, or both) appear to be necessary for the migration and proper orientation of the nucleus, as well as for SPB separation, spindle function, and nuclear division.

Subcellular localization of a protein kinase required for cell cycle initiation in Saccharomyces cerevisiae: evidence for an association between the CDC28 gene product and the insoluble cytoplasmic matrix

The product of the Saccharomyces cerevisiae gene CDC28, a protein kinase required for initiation of the cell division cycle, was localized within yeast cells. By using immunofluorescence methods, the CDC28 product was shown to be primarily cytoplasmic in distribution. The gene product was localized largely to the particulate fraction by differential centrifugation after mechanical disruption in aqueous buffers. The particulate association was not affected by the presence of nonionic detergent. To refine this localization further, a procedure was developed for the preparation of yeast cytoplasmic matrices which resemble the cytoskeletons of vertebrate cells on the basis of methodology, immunochemistry, and gross ultrastructure. A portion of the CDC28 product was found to be tightly associated with these detergent-insoluble cytoplasmic matrices by both immunofluorescence and immunoblotting procedures. Although, for technical reasons, precise quantitation was not possible, it is estimated that a minimum of 2-15% of the total CDC28 product pool is involved in the association with the insoluble matrix. Alcohol dehydrogenase, a soluble cytoplasmic protein, was found not to be associated with the cytoplasmic matrices at any detectable level, whereas, in contrast, approximately 10-40% of the total cellular actin, a bonafide cytoskeletal protein, was present in these structures. The proportion of CDC28 gene product associated with the particulate fraction, and perhaps the insoluble matrix, appears to be substantially decreased during the preparation of spheroplasts.

Construction and genetic characterization of temperature-sensitive mutant alleles of the yeast actin gene

Two temperature-sensitive mutations have been constructed in the single actin gene (ACT1) of the yeast Saccharomyces cerevisiae by in vitro mutagenesis of the cloned gene followed by integrative transformation of mutagenized DNA into yeast cells. A strategy of allele replacement was used that allowed recessive mutations to be phenotypically expressed in the initial transformants, thus simplifying the screening of large numbers of independently transformed cells. After confirming that several ts mutations were located within the actin structural gene by genetic methods, these mutant alleles were cloned, and the altered amino acid residues were defined by DNA sequence analysis. The two unique mutations resulted in substitution of proline-32 with leucine and alanine-58 with threonine. In the course of isolating these mutations, the observation was made that a high proportion of yeast cells transformed with exogenous DNA by the spheroplast method are temperature sensitive for growth because of genetic changes unrelated to the transforming DNA.

Relationship of actin and tubulin distribution to bud growth in wild-type and morphogenetic-mutant Saccharomyces cerevisiae

The distribution of actin in wild-type cells and in morphogenetic mutants of the budding yeast Saccharomyces cerevisiae was explored by staining cells with fluorochrome-labeled phallotoxins after fixing and permeabilizing the cells by several methods. The actin appeared to be localized in a set of cortical spots or patches, as well as in a network of cytoplasmic fibers. Bundles of filaments that may possibly correspond to the fibers visualized by fluorescence were observed with the electron microscope. The putative actin spots were concentrated in small and medium-sized buds and at what were apparently the sites of incipient bud formation on unbudded cells, whereas the putative actin fibers were generally oriented along the long axes of the mother-bud pairs. In several morphogenetic mutants that form multiple, abnormally elongated buds, the actin patches were conspicuously clustered at the tips of most buds, and actin fibers were clearly oriented along the long axes of the buds. There was a strong correlation between the occurrence of active growth at particular bud tips and clustering of actin spots at those same tips. Near the end of the cell cycle in wild-type cells, actin appeared to concentrate (as a cluster of spots or a band) in the neck region connecting the mother cell to its bud. Observations made using indirect immunofluorescence with a monoclonal anti-yeast-tubulin antibody on the morphogenetic mutant cdc4 (which forms multiple, abnormally elongated buds while the nuclear cycle is arrested) revealed the surprising occurrence of multiple bundles of cytoplasmic microtubules emanating from the one duplicated spindle-pole body per cell. It seems that most or all of the buds contain one or more of these bundles of microtubules, which often can be seen to extend to the very tips of the buds. These observations are consistent with the hypotheses that actin, tubulin, or both may be involved in the polarization of growth and localization of cell-wall deposition that occurs during the yeast cell cycle.

Structural rearrangements of tubulin and actin during the cell cycle of the yeast Saccharomyces

The distribution of actin and tubulin during the cell cycle of the budding yeast Saccharomyces was mapped by immunofluorescence using fixed cells from which the walls had been removed by digestion. The intranuclear mitotic spindle was shown clearly by staining with a monoclonal antitubulin; the presence of extensive bundles of cytoplasmic microtubules is reported. In cells containing short spindles still entirely within the mother cells, one of the bundles of cytoplasmic microtubules nearly always extended to (or into) the bud. Two independent reagents (anti-yeast actin and fluorescent phalloidin) revealed an unusual distribution of actin: it was present as a set of cortical dots or patches and also as distinct fibers that were presumably bundles of actin filaments. Double labeling showed that at no stage in the cell cycle do the distributions of actin and tubulin coincide for any significant length, and, in particular, that the mitotic spindle did not stain detectably for actin. However, both microtubule and actin staining patterns change in a characteristic way during the cell cycle. In particular, the actin dots clustered in rings about the bases of very small buds and at the sites on unbudded cells at which bud emergence was apparently imminent. Later in the budding cycle, the actin dots were present largely in the buds and, in many strains, primarily at the tips of these buds. At about the time of cytokinesis the actin dots clustered in the neck region between the separating cells. These aspects of actin distribution suggest that it may have a role in the localized deposition of new cell wall material.

Type I and type II keratins have evolved from lower eukaryotes to form the epidermal intermediate filaments in mammalian skin

We have traced the evolutionary origins of keratin-like sequences to the genomes of lower eukaryotes. The proteins encoded by these genes have evolved to form the intermediate filaments that comprise the backbone of vertebrate skin cells. Two related but distinct types of keratins encoded by two separate multigene subfamilies are expressed in the epidermal keratinocytes of vertebrate species from fish to human. Both at the level of protein and at the level of DNA, these two classes of keratins are coordinately conserved throughout vertebrate evolution, indicating the central role that both types of keratins must play in the assembly and structure of the 8-nm filament.

Calcium control of Saccharomyces cerevisiae actin assembly

Low levels of Ca2+ dramatically influence the polymerization of Saccharomyces cerevisiae actin in KCl. The apparent critical concentration for polymerization (C infinity) increases eightfold in the presence of 0.1 mM Ca2+. This effect is rapidly reversed by the addition of ethylene glycol bis(beta-aminoethyl ether)-N,N'-tetraacetic acid or of 0.1 mM Mg2+. Furthermore, the addition of Ca2+ to polymerized actin causes a reversible increase in the apparent C infinity. In the presence of Ca2+, at actin concentrations below the apparent C infinity, particles of 15 to 50 nm in diameter are seen instead of filaments. These particles are separated from soluble actin when Ca2+-treated filamentous actin is sedimented at high speed; both the soluble and particulate fractions retain Ca2+-sensitive polymerization. The Ca2+ effect is S. cerevisiae actin-specific: the C infinity for rabbit muscle actin is not affected by the presence of Ca2+ and S. cerevisiae actin. Ca2+ may act directly on S. cerevisiae actin to control the assembly state in vivo.

Calcium control of Saccharomyces cerevisiae actin assembly

Low levels of Ca2+ dramatically influence the polymerization of Saccharomyces cerevisiae actin in KCl. The apparent critical concentration for polymerization (C infinity) increases eightfold in the presence of 0.1 mM Ca2+. This effect is rapidly reversed by the addition of ethylene glycol bis(beta-aminoethyl ether)-N,N'-tetraacetic acid or of 0.1 mM Mg2+. Furthermore, the addition of Ca2+ to polymerized actin causes a reversible increase in the apparent C infinity. In the presence of Ca2+, at actin concentrations below the apparent C infinity, particles of 15 to 50 nm in diameter are seen instead of filaments. These particles are separated from soluble actin when Ca2+-treated filamentous actin is sedimented at high speed; both the soluble and particulate fractions retain Ca2+-sensitive polymerization. The Ca2+ effect is S. cerevisiae actin-specific: the C infinity for rabbit muscle actin is not affected by the presence of Ca2+ and S. cerevisiae actin. Ca2+ may act directly on S. cerevisiae actin to control the assembly state in vivo.