Disulfide bonding in protein biophysics

Active Dual-Protein Coating Assisted by Stepwise Protein-Protein Interactions Assembly Reduces Thrombosis and Infection

Universal protein coatings have recently gained wide interest in medical applications due to their biocompatibility and ease of fabrication. However, the challenge persists in protein activity preservation, significantly complicating the functional design of these coatings. Herein, an active dual-protein surface engineering strategy assisted by a facile stepwise protein-protein interactions assembly (SPPIA) method for catheters to reduce clot formation and infection is proposed. This strategy is realized first by the partial oxidation of bovine serum albumin (BSA) and lysozyme (LZM) for creating stable nucleation platforms via hydrophobic interaction, followed by the assembly of nonoxidized BSA (pI, the isoelectric point, ≈4.7) and LZM (pI ≈11) through electrostatic interaction owing to their opposite charge under neutral conditions. The SPPIA method effectively preserves the conformation and functionality of both BSA and LZM, thus endowing the resultant coating with potent antithrombotic and bactericidal properties. Furthermore, the stable nucleation platform ensures the adhesion and durability of the coating, resisting thrombosis and bacterial proliferation even after 15 days of PBS immersion. Overall, the SPPIA approach not only provides a new strategy for the fabrication of active protein coatings but also shows promise for the surface engineering technology of catheters.

Computation-Guided Rational Design of Cysteine-Less Protein Variants in Engineered hCGL

The engineered human cystathionine-γ-lyase (hCGL) resulting in enhanced activity toward both cysteine and cystine unveils a potential robust antitumor activity. However, the presence of cysteine residues has the potential to induce oligomerization or incorrect disulfide bonding, which may decrease the bioavailability of biopharmaceuticals. Through a meticulous design process targeting the cysteine residues within engineered hCGL, a set of potential beneficial mutants were obtained by virtual screening employing Rosetta and ABACUS. Experimental measurements have revealed that most of the mutants showed increased activity toward both substrates l-Cys and CSSC. Furthermore, mutants C109V and C229D demonstrated Tm value increases of 8.2 and 1.8 °C, respectively. After an 80 min incubation at 60 °C, mutant C229D still maintained high residual activity. Unexpectedly, mutant C109V, displaying activity approximately 2-fold higher than the activity of wild type (WT) for both substrates, showed disappointing instability in plasma, which suggests that computational design still requires further consideration. Analysis of their structure and molecular dynamics (MD) simulation revealed the impact of hydrophobic interaction, hydrogen bonds, and near-attack conformation (NAC) stability on activity and stability. This study acquired information about mutants that exhibit enhanced activity or thermal resistance and serve as valuable guidance for subsequent specific cysteine modifications.

Unveiling the underappreciated: The bonding features of C-H⋯S-S interactions observed from rotational spectroscopy

The C-H⋯S-S interactions are fundamentally important to understand the stability of biomacromolecules and their binding with small molecules, but they are still underappreciated. Herein, we characterized the C-H⋯S-S interactions in model molecular complexes. The rotational spectra of the complexes of diethyl disulfide with CH2CH2 and CH2CHF were measured and analyzed. All the detected structures are mainly stabilized by a C-H⋯S-S hydrogen bond, providing stabilization energies of 2.3-7.2 kJ mol-1. Incidental C-H⋯π or C-H⋯F interactions enhance the stabilization of the complexes. London dispersion, which accounts for 54%-68% of the total attractions, is the main driving force of stabilization. The provided bonding features of C-H⋯S-S are crucial for understanding the stabilizing role of this type of interaction in diverse processes such as supramolecular recognition, protein stability, and enzyme activity.

Topological Reaction Coordinate Captures the Folding Transition State Ensemble in a Pierced Lasso Protein

Proteins with a pierced lasso topology (PLT) have a covalent loop created by a disulfide bond, and the backbone circles back to thread the loop. This threaded topology has unique features compared to knotted topologies; notably, the topology is controlled by the chemical environment and the covalent loop remains intact even when denatured. In this work, we use the hormone leptin as our model PLT system and study its folding using molecular dynamics simulations that employ a structure-based (Go̅-like) model. We find that the reduced protein has a two-state folding mechanism with a transition state ensemble (TSE) that can be characterized by the reaction coordinate Q, the fraction of native contacts formed. In contrast, the oxidized protein, which must thread part of the polypeptide chain through a covalent loop, has a folding process that is poorly characterized by Q. Instead, we find that a topological coordinate that monitors the residue crossing the loop can identify the TSE of oxidized leptin. By precisely identifying the predicted TSE, one may now reliably calculate theoretical phi-values for the PLT protein, thereby enabling a comparison with experimental measurements. We find the loop-threading constraint leads to noncanonical phi-values that are uniformly small because this PLT protein has a flat energy landscape through the TSE.

Differential effects of disulfide bond formation in TEM-1 versus CTX-M-9 β-lactamase

To investigate how disulfide bonds can impact protein energy landscapes, we surveyed the effects of adding or removing a disulfide in two β-lactamase enzymes, TEM-1 and CTX-M-9. The homologs share a structure and 38% sequence identity, but only TEM-1 contains a native disulfide bond. They also differ in thermodynamic stability and in the number of states populated at equilibrium: CTX-M-9 is two-state whereas TEM-1 has an additional intermediate state. We hypothesized that the disulfide bond is the major underlying determinant for these observed differences in their energy landscapes. To test this, we removed the disulfide bridge from TEM-1 and introduced a disulfide bridge at the same location in CTX-M-9. This modest change to sequence modulates the stabilities-and therefore populations-of TEM-1's equilibrium states and, more surprisingly, creates a novel third state in CTX-M-9. Unlike TEM-1's partially folded intermediate, this third state is a higher-order oligomer with reduced cysteines that retains the native fold and is fully active. Sub-denaturing concentrations of urea shifts the equilibrium to the monomeric form, allowing the disulfide bond to form. Interestingly, comparing the stability of the oxidized monomer with a variant lacking cysteines reveals the disulfide is neither stabilizing nor destabilizing in CTX-M-9, in contrast with the observed stabilization in TEM-1. Thus, we can conclude that engineering disulfide bonds is not always an effective stabilization strategy even when analogous disulfides exist in more stable structural homologs. This study also illustrates how homo-oligomerization can result from a small number of mutations, suggesting complex formation might be easily accessed during a protein family's evolution.

Protein Persulfidation: Recent Progress and Future Directions

Significance: Hydrogen sulfide (H2S) is considered to be a gasotransmitter along with carbon monoxide (CO) and nitric oxide (NO), and is known as a key regulator of physiological and pathological activities. S-sulfhydration (also known as persulfidation), a mechanism involving the formation of protein persulfides by modification of cysteine residues, is proposed here to explain the multiple biological functions of H2S. Investigating the properties of protein persulfides can provide a foundation for further understanding of the potential functions of H2S. Recent Advances: Multiple methods have been developed to determine the level of protein persulfides. It has been demonstrated that protein persulfidation is involved in many biological processes through various mechanisms including the regulation of ion channels, enzymes, and transcription factors, as well as influencing protein-protein interactions. Critical Issues: Some technical and theoretical questions remain to be solved. These include how to improve the specificity of the detection methods for protein persulfidation, why persulfidation typically occurs on one or a few thiols within a protein, how this modification alters protein functions, and whether protein persulfidation has organ-specific patterns. Future Directions: Optimizing the detection methods and elucidating the properties and molecular functions of protein persulfidation would be beneficial for current therapeutics. In this review, we introduce the detailed mechanism of the persulfidation process and discuss persulfidation detection methods. In addition, this review summarizes recent discoveries of the selectivity of protein persulfidation and the regulation of protein functions and cell signaling pathways by persulfidation. Antioxid. Redox Signal. 39, 829-852.

Are Thiols Useful Biomarkers for Coronary Collateral Circulation in Patients with Stable Coronary Artery Disease?

Our aim was to investigate the relationship between thiol, which is the main component of the antioxidant system, and coronary collateral circulation (CCC). Our patients consisted of people with stable coronary artery disease (sCAD) and total occlusion in at least one vessel (n = 249). We divided the patients into two groups, good and poor, according to their CCC degree. We determined that DM, total thiol, and disulfide are independent predictors of poor CCC in multivariate logistic regression analysis (OR: 1.012, 95% CI: 1.008-1.017, p < 0.001; OR: 1.022, 95% CI: 1.000-1.044, p = 0.044; OR: 2.671, 95% CI: 1.238-5.761, p = 0.012, respectively). The ROC analysis showed a cut-off value of 328.7 for native thiol regarding the prediction of poor CCC, with 67.4% specificity and 78% sensitivity. For disulfide, it revealed a cut-off value of 15.1 regarding the prediction of poor CCC, with 57.9% specificity and 69.5% sensitivity. In this study, we detected that the patients with sCAD who developed poor CCC had lower levels of native thiol, total thiol, and disulfide compared to those with good CCC. The most interesting finding of our study is that CCC formation is an effective predictor of the antioxidant cascade rather than the inflammation cascade in sCAD patients.

PyProtif: a PyMol plugin to retrieve and visualize protein motifs for structural studies

Proteins often possess several motifs and the ones with similar motifs were found to have similar biochemical properties and thus related biological functions. Thereby, multiple databases were developed to store information on such motifs in proteins. For instance, PDBsum stores the results of Promotif's generated structural motifs and Pfam stores pre-computed patterns of functional domains. In addition to the fact that all this stored information is extremely useful, we can further augment its importance if we ought to integrate these motifs into visualization software. In this work, we have developed PyProtif, a plugin for the PyMOL molecular visualization program, which automatically retrieves protein structural and functional motifs from different databases and integrates them in PyMOL for visualization and analyses. Through an expendable menu and a user-friendly interface, the plugin grants the users the ability to study simultaneously multiple proteins and to select and manipulate each motif separately. Thus, this plugin will be of great interest for structural, evolutionary and classification studies of proteins.

Mechanisms of Cysteine-Lysine Covalent Linkage-The Role of Reactive Oxygen Species and Competition with Disulfide Bonds

Recently, a new naturally occurring covalent linkage was characterised, involving a cysteine and a lysine, bridged through an oxygen atom. The latter was dubbed as the NOS bond, reflecting the individual atoms involved in this uncommon bond which finds little parallel in lab chemistry. It is found to form under oxidising conditions and is reversible upon addition of reducing agents. Further studies have identified the bond in crystal structures across a variety of systems and organisms, potentially playing an important role in regulation, cellular defense and replication. Not only that, double NOS bonds have been identified and even found to be competitive in relation to the formation of disulfide bonds. This raises several questions about how this exotic bond comes to be, what are the intermediates involved in its formation and how it competes with other pathways of sulfide oxidation. With this objective in mind, we revisited our first proposed mechanism for the reaction with model electronic structure calculations, adding information about the reactivity with alternative reactive oxygen species and other potential competing products of oxidation. We present a network with more than 30 reactions which provides one of the most encompassing pictures for cysteine oxidation pathways to date.

Alterations of bovine nucleus pulposus cells with aging

Aging is one of the major etiological factors driving intervertebral disc (IVD) degeneration, the main cause of low back pain. The nucleus pulposus (NP) includes a heterogeneous cell population, which is still poorly characterized. Here, we aimed to uncover main alterations in NP cells with aging. For that, bovine coccygeal discs from young (12 months) and old (10-16 years old) animals were dissected and primary NP cells were isolated. Gene expression and proteomics of fresh NP cells were performed. NP cells were labelled with propidium iodide and analysed by flow cytometry for the expression of CD29, CD44, CD45, CD146, GD2, Tie2, CD34 and Stro-1. Morphological cell features were also dissected by imaging flow cytometry. Elder NP cells (up-regulated bIL-6 and bMMP1 gene expression) presented lower percentages of CD29+, CD44+, CD45+ and Tie2+ cells compared with young NP cells (upregulated bIL-8, bCOL2A1 and bACAN gene expression), while GD2, CD146, Stro-1 and CD34 expression were maintained with age. NP cellulome showed an upregulation of proteins related to endoplasmic reticulum (ER) and melanosome independently of age, whereas proteins upregulated in elder NP cells were also associated with glycosylation and disulfide bonds. Flow cytometry analysis of NP cells disclosed the existence of 4 subpopulations with distinct auto-fluorescence and size with different dynamics along aging. Regarding cell morphology, aging increases NP cell area, diameter and vesicles. These results contribute to a better understanding of NP cells aging and highlighting potential anti-aging targets that can help to mitigate age-related disc disease.

Differentiating the effects of hydrophobic interaction and disulfide bond on the myofibrillar protein emulsion gels at the high temperature and the protein interfacial properties

The study presented the effects of modulating the hydrophobic interaction and disulfide bond on the properties of myofibrillar protein (MP) emulsion gels at high temperature (95 °C) and the differentiation on the contribution of non-covalent (hydrophobic interaction) and covalent intermolecular interactions (disulfide bond) to the properties of interfacial protein films were also determined. The hydrophobic interactions among MP were modulated by the addition of octenyl succinic anhydride (OSA), and the disulfide bonds were modulated by the SH/SS exchange reactions mediated by GSH. The results showed that the MP emulsion gel properties at 95 °C were improved by modulating the hydrophobic interaction or disulfide bonds, and the dynamic interfacial adsorption of MP and dissipation quartz crystal microbalance experiments showed the interfacial adsorption pattens of protein were also changed. In addition, the hydrophobic interactions putted emphasis on improving the gel matrix, whereas the disulfide bonds focused on increasing the stiffness of interfacial protein films.

Physicochemical properties of wooden breast-extracted myosin and rheological properties of its heat-induced gel

BACKGROUND

It is reported that broilers with 'wooden breast' have poor processing properties, such as low binding and water-holding capacities. However, the reason for the poor functional characteristics has not been clarified. In this study, myosin was extracted from a wooden breast. Its physicochemical properties were investigated to clarify the relationship between the structure and physicochemical properties of the heating gel of myosin obtained from the wooden breast.

RESULTS

The turbidity of myosin solution extracted from wooden breast increased with increase in the heat treatment to a higher value than that from the normal breast meat myosin. The solubility of myosin collected from a wooden breast after heating decreased like normal breast muscle myosin. The surface hydrophobicity of myosin removed from wooden breast increased continually above 60 °C, unlike the change in surface hydrophobicity of normal breast myosin. The free thiol group of myosin extracted from the wooden breast was higher than normal breast myosin before and after heating. The apparent elasticity of heat-induced gels and chicken meat sausages was significantly lower in sausages and gel with wooden breast than normal ones (P < 0.05). The microstructure of the heated gel of normal myosin showed a fine network structure. In contrast, the heat-induced gel of wooden breast-extracted myosin showed a structure with loosely connected aggregates and many gaps.

CONCLUSION

The coarseness of the internal gel structure of myosin extracted from wooden breast was shown to affect the apparent elasticity of the gel and sausages made from the chicken meat. © 2023 Society of Chemical Industry.

Native and Engineered Cyclic Disulfide-Rich Peptides as Drug Leads

Bioactive peptides are a highly abundant and diverse group of molecules that exhibit a wide range of structural and functional variation. Despite their immense therapeutic potential, bioactive peptides have been traditionally perceived as poor drug candidates, largely due to intrinsic shortcomings that reflect their endogenous heritage, i.e., short biological half-lives and poor cell permeability. In this review, we examine the utility of molecular engineering to insert bioactive sequences into constrained scaffolds with desired pharmaceutical properties. Applying lessons learnt from nature, we focus on molecular grafting of cyclic disulfide-rich scaffolds (naturally derived or engineered), shown to be intrinsically stable and amenable to sequence modifications, and their utility as privileged frameworks in drug design.

Production and applications of fluorobody from redox-engineered Escherichia coli

Efficient selection and production of antibody fragments in microbial systems remain to be a challenging process. To optimize microbial production of single-chain variable fragments (scFvs), we have chosen five model targets, 1) a hapten, Zearalenone (ZEN) mycotoxin, along with infectious agents 2) rabies virus, 3) Propionibacterium acnes, 4) Pseudomonas aeruginosa, and a cancer cell 5) acute myeloid leukemia cell line (HL-60). The scFv binders were affinity selected from a non-immunized human phage display scFv antibody library and genetically fused to the N-terminus of emerald green fluorescent protein (EmGFP). The scFv-EmGFP fusion constructs were subcloned into an expression vector, under the control of T7 promoter, C-terminally tagged with hexa-histidine and expressed in different Escherichia coli (E. coli) hosts. This enabled the detection of cells that expressed the correct scFv-EmGFP fusion, termed fluorobody, via bright fluorescent signal in the cytoplasm. Among the three E. coli hosts tested, an engineered E. coli B strain called SHuffle B that promotes disulfide bond formation in the cytoplasm appeared to be the most appropriate host. The recombinant fluorobodies were well expressed (2-8 mg/L), possessed the fluorescence property of EmGFP, and retained the ability to bind to their cognate targets. Their specific bindings were demonstrated by ELISA, fluorescence-linked immunosorbent assay (FLISA), flow cytometry, and fluorescent microscope imaging. The fluorobody expression platform in this study could be further adopted as a one-step immunostaining technique based on scFv, isolated from phage display library to numerous desired targets. KEY POINTS: • E. coli SHuffle express T7 is a suitable expression host for scFv-EmGFP (fluorobody) • Only the clones harboring scFv-EmGFP plasmid will show bright fluorescent signal • This platform can be used to produce fluorobodies for numerous purposes.

Time-Course Transcriptome Profiling Reveals Differential Resistance Responses of Tomato to a Phytotoxic Effector of the Pathogenic Oomycete Phytophthora cactorum

Blight caused by Phytophthora pathogens has a devastating impact on crop production. Phytophthora species secrete an array of effectors, such as Phytophthora cactorum-Fragaria (PcF)/small cysteine-rich (SCR) phytotoxic proteins, to facilitate their infections. Understanding host responses to such proteins is essential to developing next-generation crop resistance. Our previous work identified a small, 8.1 kDa protein, SCR96, as an important virulence factor in Phytophthora cactorum. Host responses to SCR96 remain obscure. Here, we analyzed the effect of SCR96 on the resistance of tomato treated with this recombinant protein purified from yeast cells. A temporal transcriptome analysis of tomato leaves infiltrated with 500 nM SCR96 for 0, 3, 6, and 12 h was performed using RNA-Seq. In total, 36,779 genes, including 2704 novel ones, were detected, of which 32,640 (88.7%) were annotated. As a whole, 5929 non-redundant genes were found to be significantly co-upregulated in SCR96-treated leaves (3, 6, 12 h) compared to the control (0 h). The combination of annotation, enrichment, and clustering analyses showed significant changes in expression beginning at 3 h after treatment in genes associated with defense and metabolism pathways, as well as temporal transcriptional accumulation patterns. Noticeably, the expression levels of resistance-related genes encoding receptor-like kinases/proteins, resistance proteins, mitogen-activated protein kinases (MAPKs), transcription factors, pathogenesis-related proteins, and transport proteins were significantly affected by SCR96. Quantitative reverse transcription PCR (qRT-PCR) validated the transcript changes in the 12 selected genes. Our analysis provides novel information that can help delineate the molecular mechanism and components of plant responses to effectors, which will be useful for the development of resistant crops.

Stabilization of Cereibacter sphaeroides Photosynthetic Reaction Center by the Introduction of Disulfide Bonds

The photosynthetic reaction center of the purple nonsulfur bacterium Cereibacter sphaeroides is a useful model for the study of mechanisms of photoinduced electron transfer and a promising component for photo-bio-electrocatalytic systems. The basic research and technological applications of this membrane pigment-protein complex require effective approaches to increase its structural stability. In this work, a rational design approach to genetically modify the reaction centers by introducing disulfide bonds is used. This resulted in significantly increasing the thermal stability of some of the mutant pigment-protein complexes. The formation of the S-S bonds was confirmed by X-ray crystallography as well as SDS-PAGE, and the optical properties of the reaction centers were studied. The genetically modified reaction centers presented here preserved their ability for photochemical charge separation and could be of interest for basic science and biotechnology.

Profiling protein targets of cellular toxicant exposure

Environmental agents of exposure can damage proteins, affecting protein function and cellular protein homeostasis. Specific residues are inherently chemically susceptible to damage from individual types of exposure. Amino acid content is not completely predictive of protein susceptibility, as secondary, tertiary, and quaternary structures of proteins strongly influence the reactivity of the proteome to individual exposures. Because we cannot readily predict which proteins will be affected by which chemical exposures, mass spectrometry-based proteomic strategies are necessary to determine the protein targets of environmental toxins and toxicants. This review describes the mechanisms by which environmental exposure to toxins and toxicants can damage proteins and affect their function, and emerging omic methodologies that can be used to identify the protein targets of a given agent. These methods include target identification strategies that have recently revolutionized the drug discovery field, such as activity-based protein profiling, protein footprinting, and protein stability profiling technologies. In particular, we highlight the necessity of multiple, complementary approaches to fully interrogate how protein integrity is challenged by individual exposures.

Investigation of Product Ions Generated by 193 nm Ultraviolet Photodissociation of Peptides and Proteins Containing Disulfide Bonds

Disulfide bridges are unique post-translational modifications (PTM) that contribute to protein architecture and modulate function. This PTM, however, challenges top-down mass spectrometry by cyclizing stretches of the protein sequence. In order to produce and release detectable product ions that contribute to the assignment of proteoforms, regions of a protein encapsulated by disulfide bonds require two fragmentation events: cleavage of the protein backbone and cleavage of the disulfide bond. Traditional collisional activation methods do not cleave disulfide bonds efficiently, often leading to low sequence coverage of proteins that incorporate this feature. To address this challenge, we have evaluated the fragmentation pathways enabled by 193 nm ultraviolet photodissociation (UVPD) and UVPD coupled to electron transfer dissociation for the characterization of protein structures incorporating disulfide bonds. Cleavage of disulfide bonds by either approach results in S-S and C-S dissociation products that result from a combination of homolytic cleavage and hydrogen-transfer processes. Characterization of these product ions elevates interpretation of complex top-down spectra of proteins that incorporate disulfide bonds.

Improvement of FGF7 Thermal Stability by Introduction of Mutations in Close Vicinity to Disulfide Bond and Surface Salt Bridge

Fibroblast Growth Factor 7 (FGF7), a growth factor specific to epithelial cells, has attracted attention as a therapeutic protein. However, FGF7 has a limitation in its use due to low protein stability. Here, the mutations were designed to increase the stability of FGF7 by analyzing its 3D structure and sequence of other FGFs. Palifermin, N-terminal truncated FGF7 is known to have improved stability and was used as control protein in our study. The K126 and K178 were substituted into glutamate to form salt bridge with the neighboring residue R175 respectively and A120C mutation was introduced in close vicinity to disulfide bond between C133 and C137. The data of Circular Dichroism (CD) showed that all mutant proteins tested had higher Tm value than Palifermin and Tm of A120C/K126E/K178E FGF7 mutant protein was 15.24 °C higher than that of Palifermin. The results of cell proliferation activity and soluble protein analyzed by sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS-PAGE) after 37 °C or 45 °C incubation exhibited that the stability of A120C mutant protein and A120C-including mutant proteins was improved. These results suggest that the mutation of amino acid in close vicinity to disulfide bond and the salt bridge at the surface of FGF7 enhanced thermal stability and make FGF7 more useful for pharmaceutical and cosmetical application.

Design and Ribosomal Incorporation of Noncanonical Disulfide-Directing Motifs for the Development of Multicyclic Peptide Libraries

The engineering of naturally occurring disulfide-rich peptides (DRPs) has been significantly hampered by the difficulty of manipulating disulfide pairing. New DRPs that take advantage of fold-directing motifs and noncanonical thiol-bearing amino acids are easy-to-fold with expected disulfide connectivities, representing a new class of scaffolds for the development of peptide ligands and therapeutics. However, the limited diversity of the scaffolds and particularly the use of noncanonical amino acids [e.g., penicillamine (Pen)] that are difficult to be translated by ribosomes greatly hamper the further development and application of these DRPs. Here, we designed and synthesized noncanonical bisthiol motifs bearing sterically obstructed thiol groups analogous to the Pen thiol to direct the folding of peptides into specific bicyclic and tricyclic structures. These bisthiol motifs can be ribosomally incorporated into peptides through a commercially available PURE system integrated with genetic code reprograming, which enables, for the first time, the in vitro expression of bicyclic peptides with two noncanonical and orthogonal disulfide bonds. We further constructed a bicyclic peptide library encoded by mRNA, with which new bicyclic peptide ligands with nanomolar affinity to proteins were successfully selected. Therefore, this study provides a new, general, and robust method for discovering de novo DRPs with new structures and functions not derived from natural peptides, which would greatly benefit the field of peptide drug discovery.

Sensitive and resistant of the homologous disulfide-bridged proteins α-lactalbumin and lysozyme to attack of hydrogen-atoms, dithiothreitol and trifluoroacetic acid, examined by matrix-assisted laser desorption/ionization mass spectrometry

Background

Evolutionarily homologous proteins bovine α-lactoalbumin (αLA) and hen egg-white lysozyme (HEL) are very similar in primary, secondary and tertiary structures involving the location of disulfide-bridges (S–S), and are resistant to the action of hydrolytic enzymes and reagents. It is of interest to examine and compare the difference in backbone cleavage characteristics, by using reductive and hydrolytic reagents.

Methods

In-source decay (ISD) combined with matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS), reductive treatment of αLA and HEL with dithiothreitol (DTT) and acid hydrolysis with trifluoroacetic acid (TFA) were employed to examine the difference in the backbone cleavage characteristics of αLA and HEL.

Results

The treatment of αLA and HEL with DTT/AcOHNH₃ resulted in similar cleavage behaviors of the backbone N-Cα and S–S bonds, i.e., the enhancements of the intensity and m/z range of sequence-reflected fragment ions were very similar. However, the treatment of αLA with DTT/TFA resulted in unexpected residue-specific degradation at the peptide bond of the Asp-Xxx, Xxx-Ser/Thr, Gln-Xxx, Xxx-Gly and Gly-Xxx residues, while HEL did not occur such degradation.

Conclusions

The results obtained above indicate that acidic αLA is very sensitive to acidic additive such as TFA, while basic HEL is resistance to acidic additives.

General significance

The study demonstrates the sensitive and resistant of evolutionary homologous proteins αLA and HEL to the acid hydrolysis and these characters come from acidic and basic nature of the proteins.

•

Evolutionary homologous proteins bovine alpha-lactoalbumin and hen egg-white lysozyme are quite different in the protection from acidic reagents.

•

Alpha-lactoalbumin is easily hydrolyzed with acidic reagents at the specific Asp, Gly, Thr and Ser residues owing to the acidic protein with pI4.53

•

Lysozyme is perfectly resistant to acidic reagents due to the presence of strong basic Arg residues owing to the basic protein with pI10.7

•

Degradation characteristics at the backbone S–S and N-Cα bonds of both proteins are very similar.

A thermodynamic atlas of proteomes reveals energetic innovation across the tree of life

Protein stability is a fundamental molecular property enabling organisms to adapt to their biological niches. How this is facilitated and whether there are kingdom specific or more general universal strategies is not known. A principal obstacle to addressing this issue is that the vast majority of proteins lack annotation, specifically thermodynamic annotation, beyond the amino acid and chromosome information derived from genome sequencing. To address this gap and facilitate future investigation into large-scale patterns of protein stability and dynamics within and between organisms, we applied a unique ensemble-based thermodynamic characterization of protein folds to a substantial portion of extant sequenced genomes. Using this approach, we compiled a database resource focused on the position-specific variation in protein stability. Interrogation of the database reveals; 1) domains of life exhibit distinguishing thermodynamic features, with eukaryotes particularly different from both archaea and bacteria, 2) the optimal growth temperature of an organism is proportional to the average apolar enthalpy of its proteome, 3) intrinsic disorder content is also proportional to the apolar enthalpy (but unexpectedly not the predicted stability at 25 °C), and 4) secondary structure and global stability information of individual proteins is extractable. We hypothesize that wider access to residue-specific thermodynamic information of proteomes will result in deeper understanding of mechanisms driving functional adaptation and protein evolution. Our database is free for download at https://afc-science.github.io/thermo-env-atlas/.

Insights of the Neofusicoccum parvum-Liquidambar styraciflua Interaction and Identification of New Cysteine-Rich Proteins in Both Species

Neofusicoccum parvum belongs to the Botryosphaeriaceae family, which contains endophytes and pathogens of woody plants. In this study, we isolated 11 strains from diseased tissue of Liquidambar styraciflua. Testing with Koch's postulates-followed by a molecular approach-revealed that N. parvum was the most pathogenic strain. We established an in vitro pathosystem (L. styraciflua foliar tissue-N. parvum) in order to characterize the infection process during the first 16 days. New CysRPs were identified for both organisms using public transcriptomic and genomic databases, while mRNA expression of CysRPs was analyzed by RT-qPCR. The results showed that N. parvum caused disease symptoms after 24 h that intensified over time. Through in silico analysis, 5 CysRPs were identified for each organism, revealing that all of the proteins are potentially secreted and novel, including two of N. parvum proteins containing the CFEM domain. Interestingly, the levels of the CysRPs mRNAs change during the interaction. This study reports N. parvum as a pathogen of L. styraciflua for the first time and highlights the potential involvement of CysRPs in both organisms during this interaction.

Protein Assembly by Design

Proteins are nature's primary building blocks for the construction of sophisticated molecular machines and dynamic materials, ranging from protein complexes such as photosystem II and nitrogenase that drive biogeochemical cycles to cytoskeletal assemblies and muscle fibers for motion. Such natural systems have inspired extensive efforts in the rational design of artificial protein assemblies in the last two decades. As molecular building blocks, proteins are highly complex, in terms of both their three-dimensional structures and chemical compositions. To enable control over the self-assembly of such complex molecules, scientists have devised many creative strategies by combining tools and principles of experimental and computational biophysics, supramolecular chemistry, inorganic chemistry, materials science, and polymer chemistry, among others. Owing to these innovative strategies, what started as a purely structure-building exercise two decades ago has, in short order, led to artificial protein assemblies with unprecedented structures and functions and protein-based materials with unusual properties. Our goal in this review is to give an overview of this exciting and highly interdisciplinary area of research, first outlining the design strategies and tools that have been devised for controlling protein self-assembly, then describing the diverse structures of artificial protein assemblies, and finally highlighting the emergent properties and functions of these assemblies.

Rapid Disulfide Mapping in Peptides and Proteins by meta-Chloroperoxybenzoic Acid (mCPBA) Oxidation and Tandem Mass Spectrometry

Disulfide bonds are a class of important post-translational modifications that play important roles in modulating the structures and functions of proteins. Therefore, the mapping of disulfide linkages in peptides and proteins is indispensable for complete structure characterization and functional studies. As disulfide bonds in protonated ions do not dissociate readily under low-energy collision-induced dissociation (CID), they are usually chemically cleaved or activated prior to mass spectrometry (MS) or tandem MS (MS/MS) analysis. In this study, we report a new method that allows the mapping of disulfide linkages in peptides and proteins through meta-chloroperoxybenzoic acid (mCPBA)-based disulfide oxidation and MS/MS. Upon oxidation, the disulfide bond is converted to a thiosulfinate group, i.e., S(═O)-S, in a rapid (>60% yield in 1 min) and highly specific approach in an aqueous phase. The thiosulfinate group is then preferentially cleaved by MS/MS. For interchain disulfide linkages, this leads to a facile peptide chain separation and the identification of disulfide-linked peptides. For intrachain disulfide linkages, collisional activation of the thiosulfinate leads to disulfide cleavage and fragmentation of the peptide backbone constrained by the disulfide loop, enabling a near-complete peptide sequencing. The mCPBA oxidation-based disulfide mapping strategy can be readily integrated with bottom-up or top-down protein analysis for comprehensive protein structure elucidation, e.g., digested lysozyme and intact human insulin.

Accelerating Reaction Rates of Biomolecules by Using Shear Stress in Artificial Capillary Systems

Biomimetics is a design principle within chemistry, biology, and engineering, but chemistry biomimetic approaches have been generally limited to emulating nature's chemical toolkit while emulation of nature's physical toolkit has remained largely unexplored. To begin to explore this, we designed biophysically mimetic microfluidic reactors with characteristic length scales and shear stresses observed within capillaries. We modeled the effect of shear with molecular dynamics studies and showed that this induces specific normally buried residues to become solvent accessible. We then showed using kinetics experiments that rates of reaction of these specific residues in fact increase in a shear-dependent fashion. We applied our results in the creation of a new microfluidic approach for the multidimensional study of cysteine biomarkers. Finally, we used our approach to establish dissociation of the therapeutic antibody trastuzumab in a reducing environment. Our results have implications for the efficacy of existing therapeutic antibodies in blood plasma as well as suggesting in general that biophysically mimetic chemistry is exploited in biology and should be explored as a research area.

3D interaction homology: Hydropathic interaction environments of serine and cysteine are strikingly different and their roles adapt in membrane proteins

Atomic-resolution protein structural models are prerequisites for many downstream activities like structure-function studies or structure-based drug discovery. Unfortunately, this data is often unavailable for some of the most interesting and therapeutically important proteins. Thus, computational tools for building native-like structural models from less-than-ideal experimental data are needed. To this end, interaction homology exploits the character, strength and loci of the sets of interactions that define a structure. Each residue type has its own limited set of backbone angle-dependent interaction motifs, as defined by their environments. In this work, we characterize the interactions of serine, cysteine and S-bridged cysteine in terms of 3D hydropathic environment maps. As a result, we explore several intriguing questions. Are the environments different between the isosteric serine and cysteine residues? Do some environments promote the formation of cystine S-S bonds? With the increasing availability of structural data for water-insoluble membrane proteins, are there environmental differences for these residues between soluble and membrane proteins? The environments surrounding serine and cysteine residues are dramatically different: serine residues are about 50% solvent exposed, while cysteines are only 10% exposed; the latter are more involved in hydrophobic interactions although there are backbone angle-dependent differences. Our analysis suggests that one driving force for -S-S- bond formation is a rather substantial increase in burial and hydrophobic interactions in cystines. Serine and cysteine become less and more, respectively, solvent-exposed in membrane proteins. 3D hydropathic environment maps are an evolving structure analysis tool showing promise as elements in a new protein structure prediction paradigm.

Structure-Based Engineering of Peptide Macrocyclases for the Chemoenzymatic Synthesis of Microviridins

Microviridins are cyanobacterial tricyclic depsipeptides with unique ring architectures and function as serine protease inhibitors. In this study, we explore two strategies to probe the structure and mechanism of macrocyclases involved in microviridin biosynthesis. The results both provide approaches for in vitro chemoenzymatic synthesis and insight into the molecular interactions and function of the biosynthetic enzymes. The first strategy involves generating constitutively activated macrocyclases whereby the leader portion of the substrate peptide is covalently attached to the ATP-grasp ligases to examine leader peptide/enzyme interactions. The second strategy uses a structure-based design to create disulfide cross-linked peptide/enzyme complexes. Together, the strategies provide constitutively active enzymes and tools to study the catalysis of the macrocyclizations on synthetic core peptides.

Optimization and kinetic modeling of interchain disulfide bond reoxidation of monoclonal antibodies in bioprocesses

Disulfide bonds play a crucial role in folding and structural stabilization of monoclonal antibodies (mAbs). Disulfide bond reduction may happen during the mAb manufacturing process, resulting in low molecular weight species and possible failure to meet product specifications. Although many mitigation strategies have been developed to prevent disulfide reduction, to the best of our knowledge, reforming disulfide bonds from the reduced antibody in manufacturing has not previously been reported. Here, we explored a novel rescue strategy in the downstream process to repair the broken disulfide bonds via in-vitro redox reactions on Protein A resin. Redox conditions including redox pair (cysteine/cystine ratio), pH, temperature, and reaction time were examined to achieve high antibody purity and a high reaction rate. Under the optimal redox condition, >90% reduced antibody could be reoxidized to form an intact antibody on Protein A resin in an hour. In addition, this study showed high flexibility on the range of the intact mAb fraction in the initial reduced mAb sample (the lower limit of intact mAb faction could be 14% based on the data reported in this study). Furthermore, a kinetic model based on elementary oxidative reactions was constructed to help optimize the reoxidation conditions and to predict product purity. Together, the deep understanding of interchain disulfide bond reoxidation, combined with the predictive kinetic model, provided a good foundation to implement a rescue strategy to generate high-purity antibodies with substantial cost savings in manufacturing processes.

Controlling the Structure and Function of Protein Thin Films through Amyloid-like Aggregation

Protein thin films (PTFs) with tunable structure and function can offer multiple opportunities in various fields such as surface modification, biomaterials, packaging, optics, electronics, separation, energy, and environmental science. Although nature may offer a variety of examples of high-level control of structure and function, e.g., the S layer of cells, synthetic alternatives for large-area protein-based thin films with fine control over both biological function and material structure are a key challenge, especially when aiming for facile, low-cost, green, and large-scale preparation as well as a further extension of function, such as the encapsulation and release of functional building blocks.Therefore, regarding the structure and function of PTFs, we will first briefly comment on the problems associated with PTF fabrication, and then, regarding the basis of our long-term research on protein-based thin films, we will summarize the new strategies that we have developed in recent years to explore and control the structure and function of PTFs for frontier research and practical applications.Inspired by naturally occurring protein amyloid fibrillization, we proposed the amyloid-like protein aggregation strategy to assemble proteins into supramolecular 2D films with extremely large sizes and enduring interfacial adhesion stability. This approach opened a new window for PTF fabrication in which the spontaneous interfacial 2D aggregation of protein oligomers instead of traditional 1D protofibril elongation directs the assembly of proteins. As a result, the film morphology, thickness, porosity, and function can be tailored by simply tuning the interfacial aggregation pathways.We further modified amyloid-like protein aggregation to develop chemoselective reaction-induced protein aggregation (CRIPA). It is well known that chemoselective reactions have been employed for protein modification. However, the application of such reactions in PTF fabrication has been overlooked. We initiated this new strategy by employing thiol-disulfide exchange reactions. These reactions are chemoselective toward proteins containing specific disulfide bonds with high redox potentials, resulting in amyloid-like aggregation and thin film formation. Functional proteins with immunity to such reactions can be encapsulated in thin films and released on demand without a loss of activity, opening a new avenue for the development of functional PTFs and coatings.Finally, the resultant amyloid-inspired PTFs, as a new type of biomimetic materials, provide a good platform for integration with various biomedical functions. Here, the creation of bioactive surfaces on virtually arbitrary substrates by amyloid-like PTFs will be discussed, highlighting antimicrobial, antifouling, molecular separation, and interfacial biomineralization activities that exceed those of their native protein precursors and synthetic alternatives.

Total thiol can contribute to differentiating prostate cancer from BPH: Prostate Thiol Index as a new player

To assess the distinctiveness of serum native thiol (NT), total thiol (TT) and disulfide (SS) levels in PCa patients, we created a new parameter, prostate thiol index (PTI) [tPSA (TTxPVxAge) ^-1/2 ]. We determined the performance of the PTI on PCa diagnosis. A total of 107 male patients (PCa:65; BPH:42) who were separated according to their Gleason scores, ISUP grades and EAU risk groups and 20 healthy subjects were included. The performances of the tests were determined. The PCa and BPH groups had lower NT and TT levels and higher SS levels than the control group. PCa patients had higher PTI, tPSA, fPSA, PSAD levels, lower fPSA%, PV and PSA-AV levels than BPH patients. TT, PTI, tPSA, fPSA, fPSA%, PSA-AV, PSAD and PV had significant diagnostic performances. PTI had the highest AUC value and accuracy, PSA-AV had the highest specificity, and fPSA had the lowest sensitivity. The performance of the PTI was the best in distinguishing PCa from BPH. PTI, tPSA and PSAD positively and PSA-AV negatively correlated with ISUP grades and EAU groups. TT can contribute to the discrimination of PCa from BPH and PTI may decrease unnecessary biopsies in clinical practice.

Glutathione-mediated formation of disulfide bonds modulates the properties of myofibrillar protein gels at different temperatures

The present study illustrated modulation of protein aggregation by affecting disulfide/sulfhydryl exchange reactions by adding different concentrations of free thiol represented by reduced-glutathione (GSH) for modulating myofibrillar protein (MP) gel properties at 75 °C or 95 °C. Gel strength and rheological results showed the effects of GSH were dependent on the concentrations (5, 10, 20, 40, and 80 g/kg) and heating temperatures. SEM results showed that the addition of GSH improved the gel microstructure at 95 °C. AFM and DLS results indicated that protein aggregation was also inhibited. At 75 °C, the addition of GSH influenced both MP aggregation and gel properties. Low concentrations (5, 10 g/kg) of GSH promoted aggregation, whereas high concentrations (20, 40, and 80 g/kg) of GSH inhibited this. By analyzing the protein structure and cross-linking pattern changes of MP and MP/GSH composites, a pathway involving GSH influencing MP gel properties was determined.

Antibody disulfide bond reduction and recovery during biopharmaceutical process development-A review

Antibody disulfide bond reduction has been a challenging issue in monoclonal antibody manufacturing. It could lead to a decrease of product purity and failure to meet the targeted product profile and/or specifications. More importantly, disulfide bond reduction could also impact drug safety and efficacy. Scientists across the industry have been examining the root causes and developing mitigation strategies to address the challenge. In recent years, with the development of high titer mammalian cell culture processes to meet the rapidly growing demand for antibody biopharmaceuticals, disulfide bond reduction has been observed more frequently. Thus, it is necessary to continue evolving the disulfide reduction mitigation strategies and developing novel approaches to maintain high product quality. Additionally, in recent years as more complex molecules (such as bispecific and trispecific antibodies) emerge, the molecular heterogeneity due to incomplete formation of the interchain disulfide bonds becomes a more imperative challenging issue. Given the disulfide reduction challenges that biotech industry is facing, in this review, we provide a comprehensive scientific summary of the root cause analysis of disulfide reduction during process development of antibody therapeutics, mitigation strategies and its potential remediated recovery based on published papers. First, this paper intends to highlight different aspects of the root cause for disulfide reduction. Secondly, to provide a broader understanding of the disulfide bond reduction in downstream process, this paper discusses disulfide bond reduction impact on product stability, associated analytical methods for disulfide bond reduction detection and characterization, process control strategies as well as their manufacturing implementation. In addition, brief perspectives on the development of future mitigation strategies are also reviewed, including platform alignment, mitigation strategy application for the emerging new modalities such as bispecific and trispecific antibodies as well as using machine learning to identify molecule susceptibility of disulfide bond reduction. The data in this review are originated from the published papers.

Unfolding of Helical Poly(L-Glutamic Acid) in N,N-Dimethylformamide Probed by Pyrene Excimer Fluorescence (PEF)

The denaturation undergone by α–helical poly(L-glutamic acid) (PLGA) in N,N-dimethylformamide upon addition of guanidine hydrochloride (GdHCl) was characterized by comparing the fluorescence of a series of PLGA constructs randomly labeled with the dye pyrene (Py-PLGA) to that of a series of Py-PDLGA samples prepared from a racemic mixture of D,L-glutamic acid. The process of pyrene excimer formation (PEF) was taken advantage of to probe changes in the conformation of α–helical Py-PLGA. Fluorescence Blob Model (FBM) analysis of the fluorescence decays of the Py-PLGA and Py-PDLGA constructs yielded the average number (<N_blob>) of glutamic acids located inside a blob, which represented the volume probed by an excited pyrenyl label. <N_blob> remained constant for randomly coiled Py-PDLGA but decreased from ~20 to ~10 glutamic acids for the Py-PLGA samples as GdHCl was added to the solution. The decrease in <N_blob> reflected the decrease in the local density of PLGA as the α–helix unraveled in solution. The changes in <N_blob> with GdHCl concentration was used to determine the change in Gibbs energy required to denature the PLGA α–helix in DMF. The relationship between <N_blob> and the local density of macromolecules can now be applied to characterize the conformation of macromolecules in solution.

Functionally confirmed compound heterozygous ADAM17 missense loss-of-function variants cause neonatal inflammatory skin and bowel disease 1

A disintegrin and metalloprotease 17 (ADAM17) is the major sheddase that processes more than 80 substrates, including tumour necrosis factor-α (TNFα). The homozygous genetic deficiency of ADAM17 causing a complete loss of ADAM17 expression was reported to be linked to neonatal inflammatory skin and bowel disease 1 (NISBD1). Here we report for the first time, a family with NISBD1 caused by functionally confirmed compound heterozygous missense variants of ADAM17, namely c.1699T>C (p.Cys567Arg) and c.1799G>A (p.Cys600Tyr). Both variants were detected in two siblings with clinical features of NISBD1, such as erythroderma with exudate in whole body, recurrent skin infection and sepsis and prolonged diarrhoea. In a cell-based assay using Adam10/17 double-knockout mouse embryonic fibroblasts (Adam10/17^−/− mEFs) exogenously expressing each of these mutants, phorbol 12-myristate 13-acetate-stimulated shedding was strongly reduced compared with wild-type ADAM17. Thus, in vitro functional assays demonstrated that both missense variants cause the loss-of-function of ADAM17, resulting in the development of NISBD1. Our study further expands the spectrum of genetic pathology underlying ADAM17 in NISBD1 and establishes functional assay systems for its missense variants.

Disulfide bond engineering of AppA phytase for increased thermostability requires co-expression of protein disulfide isomerase in Pichia pastoris

BACKGROUND

Phytases are widely used commercially as dietary supplements for swine and poultry to increase the digestibility of phytic acid. Enzyme development has focused on increasing thermostability to withstand the high temperatures during industrial steam pelleting. Increasing thermostability often reduces activity at gut temperatures and there remains a demand for improved phyases for a growing market.

RESULTS

In this work, we present a thermostable variant of the E. coli AppA phytase, ApV1, that contains an extra non-consecutive disulfide bond. Detailed biochemical characterisation of ApV1 showed similar activity to the wild type, with no statistical differences in k_cat and K_M for phytic acid or in the pH and temperature activity optima. Yet, it retained approximately 50% activity after incubations for 20 min at 65, 75 and 85 °C compared to almost full inactivation of the wild-type enzyme. Production of ApV1 in Pichia pastoris (Komagataella phaffi) was much lower than the wild-type enzyme due to the presence of the extra non-consecutive disulfide bond. Production bottlenecks were explored using bidirectional promoters for co-expression of folding chaperones. Co-expression of protein disulfide bond isomerase (Pdi) increased production of ApV1 by ~ 12-fold compared to expression without this folding catalyst and restored yields to similar levels seen with the wild-type enzyme.

CONCLUSIONS

Overall, the results show that protein engineering for enhanced enzymatic properties like thermostability may result in folding complexity and decreased production in microbial systems. Hence parallel development of improved production strains is imperative to achieve the desirable levels of recombinant protein for industrial processes.

The Characteristics of Disulfide-Centered Hydrogen Bonds

The disulfide-centered hydrogen bonds in the three different model systems of diethyl disulfide⋅⋅⋅H₂ O/H₂ CO/HCONH₂ clusters were characterized by high-resolution Fourier transform microwave spectroscopy and quantum chemical computations. The global minimum energy structures for each cluster are experimentally observed and are characterized by one of the three different S-S⋅⋅⋅H-C/N/O disulfide-centered hydrogen bonds and two O⋅⋅⋅H-C hydrogen bonds. Non-covalent interaction and natural bond orbital analyses further confirm the experimental observations. The symmetry-adapted perturbation theory (SAPT) analysis reveals that electrostatic is dominant in diethyl disulfide⋅⋅⋅H₂ O/HCONH₂ clusters being consistent with normal hydrogen bonds, whilst dispersion takes over in diethyl disulfide⋅⋅⋅H₂ CO cluster. Our study gives accurate structural parameters for the disulfide bond involved non-covalent clusters providing important benchmarking data for the theoretical evaluation of more complex systems.

Cation-amino acid interactions: Implications for protein destabilization

The mechanism for protein stabilization or destabilization has long been an open quest. In the present study, we have studied the interactions between amino acids and guanidinium (Gdm⁺)/ammonium (NH₄⁺) ions by using low field nuclear magnetic resonance (LF-NMR), where Gdm⁺ and NH₄⁺ are denaturant and stabilizer for proteins, respectively. It shows that Gdm⁺ favors to bind to the thiol group or the hydroxyl group on the side chain but weakly interacts with the α-carboxyl group. In contrast, NH₄⁺ prefers to bind to the α-carboxyl group but slightly interacts with the thiol group or the hydroxyl group on the side chain of amino acids. ¹HNMR reveals the hydrogen bonding between NH₄⁺ and the α-carboxyl group, which is not involved in the interactions between Gdm⁺ and cysteine. Our study demonstrates that the strong interactions between the denaturant and the sulfur atom or the disulfide bond promote the direct binding of the denaturant toward proteins, leading to the destabilization.

The effect of structural modification of antimicrobial peptides on their antimicrobial activity, hemolytic activity, and plasma stability

In this article, a series of modifications were made on an antimicrobial peptide F_2,5,12 W, including altering the amino acid sequence, introducing cysteine and other typical amino acids, developing peptide dimers via disulfide bonds, and conjugating with mPEG, in order to enhance the antimicrobial activity, plasma stability, and reduce the hemolytic activity of peptides. The results showed that mPEG conjugation could significantly improve the plasma stability and reduce the hemolytic activity of peptides, while the antimicrobial activity decreased meanwhile. However, altering the sequence of the peptide without changing its amino acid composition had little impact on its antimicrobial activity and plasma stability. The introduction of cysteine enhanced the plasma stability of peptides conspicuously, but at the same time, the increased hydrophobicity of peptides increased their hemolysis. The antimicrobial mechanism and cytotoxicity of the peptides with relatively high antimicrobial activity were also studied. In general, this study provided some ideas for the rational design and structure optimization of antimicrobial peptides.

diSBPred: A machine learning based approach for disulfide bond prediction

The protein disulfide bond is a covalent bond that forms during post-translational modification by the oxidation of a pair of cysteines. In protein, the disulfide bond is the most frequent covalent link between amino acids after the peptide bond. It plays a significant role in three-dimensional (3D) ab initio protein structure prediction (aiPSP), stabilizing protein conformation, post-translational modification, and protein folding. In aiPSP, the location of disulfide bonds can strongly reduce the conformational space searching by imposing geometrical constraints. Existing experimental techniques for the determination of disulfide bonds are time-consuming and expensive. Thus, developing sequence-based computational methods for disulfide bond prediction becomes indispensable. This study proposed a stacking-based machine learning approach for disulfide bond prediction (diSBPred). Various useful sequence and structure-based features are extracted for effective training, including conservation profile, residue solvent accessibility, torsion angle flexibility, disorder probability, a sequential distance between cysteines, and more. The prediction of disulfide bonds is carried out in two stages: first, individual cysteines are predicted as either bonding or non-bonding; second, the cysteine-pairs are predicted as either bonding or non-bonding by including the results from cysteine bonding prediction as a feature. The examination of the relevance of the features employed in this study and the features utilized in the existing nearest neighbor algorithm (NNA) method shows that the features used in this study improve about 7.39 % in jackknife validation balanced accuracy. Moreover, for individual cysteine bonding prediction and cysteine-pair bonding prediction, diSBPred provides a 10-fold cross-validation balanced accuracy of 82.29 % and 94.20 %, respectively. Altogether, our predictor achieves an improvement of 43.25 % based on balanced accuracy compared to the existing NNA based approach. Thus, diSBPred can be utilized to annotate the cysteine bonding residues of protein sequences whose structures are unknown as well as improve the accuracy of the aiPSP method, which can further aid in experimental studies of the disulfide bond and structure determination.

Ligand-induced transition in conformations of vicinal cysteine disulfides in proteins

Vicinal cysteine disulfides are thought to be associated with specific conformations of cysteine disulfides due to the restricted rotation of single bonds in an eight-membered cyclic disulfide loop. Conformations of vicinal cysteine disulfides are analyzed using χ₁ , χ₂ , χ₃ , χ₂ ', χ₁ ' torsion angles in the crystal structures of proteins retrieved from Protein Data Bank (PDB). 85% of vicinal disulfides have (+, -)LHStaple conformation with trans configuration of the peptide bond and 9% have (-, -)RHStaple conformation with cis configured peptide bond. Conformational analysis of dipeptide Cys-Cys vicinal disulfide by density functional theory (DFT) further supported (+, -)LHStaple, (-, -)RHStaple, and (+, +)RHStaple as the preferred conformations of vicinal disulfides. Interestingly, the rare conformations of vicinal disulfides are observed in the ligand-bound forms of proteins and have higher disulfide strain energy. Conformations of vicinal disulfides in palmitoyl protein thioesterase 1, AChBP, and α7 nicotinic receptor are changed from preferred (+, -)LHStaple to rare (+, -)AntiLHHook/(+, -)AntiRHHook/(+, +)RHStaple conformation due to binding of ligands. Surprisingly, ligands are proximal to the vicinal disulfides in protein complexes that exhibited rare conformations of vicinal disulfides. The report has identified (+, -) LHStaple/(-, -) RHStaple as the hallmark conformations of vicinal disulfides and unraveled ligand-induced transition in conformations of vicinal cysteine disulfides in proteins.

Fibrillation of Human Calcitonin and Its Analogs: Effects of Phosphorylation and Disulfide Reduction

Some therapeutic peptides self-assemble in solution to form ordered, insoluble, β-sheet-rich amyloid fibrils. This physical instability can result in reduced potency, cause immunogenic side effects, and limit options for formulation. Understanding the mechanisms of fibrillation is key to developing rational mitigation strategies. Here, amide hydrogen-deuterium exchange with mass spectrometric analysis (HDX-MS) coupled with proteolytic digestion was used to identify the early stage interactions leading to fibrillation of human calcitonin (hCT), a peptide hormone important in calcium metabolism. hCT fibrillation kinetics was sigmoidal, with lag, growth, and plateau phases as shown by thioflavin T and turbidity measurements. HDX-MS of fibrillating hCT (pH 7.4; 25°C) suggested early involvement of the N-terminal (1-11) and central (12-19) fragments in interactions during the lag phase, whereas C-terminal fragments (20-32 and 26-32) showed limited involvement during this period. The residue-level information was used to develop phosphorylated hCT analogs that showed modified fibrillation that depended on phosphorylation site. Phosphorylation in the central region resulted in complete inhibition of fibrillation for the phospho-Thr-13 hCT analog, whereas phosphorylation in the N-terminal and C-terminal regions inhibited but did not prevent fibrillation. Reduction of the Cys1-Cys7 disulfide bond resulted in faster fibrillation with involvement of different hCT residues as indicated by pulsed HDX-MS. Together, the results demonstrate that small structural changes have significant effects on hCT fibrillation and that understanding these effects can inform the rational development of fibrillation-resistant hCT analogs.

Revisiting the Formation of a Native Disulfide Bond: Consequences for Protein Regeneration and Beyond

Oxidative protein folding involves the formation of disulfide bonds and the regeneration of native structure (N) from the fully reduced and unfolded protein (R). Oxidative protein folding studies have provided a wealth of information on underlying physico-chemical reactions by which disulfide-bond-containing proteins acquire their catalytically active form. Initially, we review key events underlying oxidative protein folding using bovine pancreatic ribonuclease A (RNase A), bovine pancreatic trypsin inhibitor (BPTI) and hen-egg white lysozyme (HEWL) as model disulfide bond-containing folders and discuss consequential outcomes with regard to their folding trajectories. We re-examine the findings from the same studies to underscore the importance of forming native disulfide bonds and generating a “native-like” structure early on in the oxidative folding pathway. The impact of both these features on the regeneration landscape are highlighted by comparing ideal, albeit hypothetical, regeneration scenarios with those wherein a native-like structure is formed relatively “late” in the R→N trajectory. A special case where the desired characteristics of oxidative folding trajectories can, nevertheless, stall folding is also discussed. The importance of these data from oxidative protein folding studies is projected onto outcomes, including their impact on the regeneration rate, yield, misfolding, misfolded-flux trafficking from the endoplasmic reticulum (ER) to the cytoplasm, and the onset of neurodegenerative disorders.

Thiol-disulfide homeostasis: an integrated approach with biochemical and clinical aspects

Dynamic thiol-disulfide homeostasis (TDH) is a new area has begun to attract more scrutiny. Dynamic TDH is reversal of thiol oxidation in proteins and represents the status of thiols (-SH) and disulfides (-S-S-). Organic compounds containing the sulfhydryl group is called thiol, composed of sulfur and hydrogen atoms. Disulfides are the most important class of dynamic, redox responsive covalent bonds build in between two thiol groups. For many years, thiol levels were analyzed by several methods. During last years, measurements of disulfide levels have been analyzed by a novel automated method, developed by Erel and Neselioglu. In this method, addition to thiol (termed as native thiol) levels, disulfide levels were also measured and sum of native thiol and disulfide levels were termed as total thiol. Therefore, TDH was begun to be understood in organism. In healthy humans, TDH is maintained within a certain range. Dysregulated dynamic TDH has been implicated several disorders with unknown etiology. A growing body of evidence has demonstrated that the thiol-disulfide homeostasis is involved in variety diseases, such as diabetes mellitus, hypertension, nonsmall cell lung cancer, familial Mediterranean fever (FMF), inflammatory bowel diseases, occupational diseases, gestational diabetes mellitus and preeclampsia. These results may elucidate some pathogenic mechanism or may be a predictor indicating diagnostic clue, prognostic marker or therapeutic sign. In conclusion, protection of the thiol-disulfide homeostasis is of great importance for the human being. Evidence achieved so far has proposed that thiol-disulfide homeostasis is an important issue needs to elucidate wholly.