Gliding motility of prokaryotes: ultrastructure, physiology, and genetics

FENE-P fluid flow generated by self-propelling bacteria with slip effects

It is hypothesized that gliding bacteria move by producing waves on their own surface and leave an adhesive slime trail. Slime is basically a viscoelastic slippery material. Based on these observations, we use a mathematical model (of undulating sheet) to examine the locomotion of gliding bacteria over a layer of non-Newtonian slime. The constitutive equations of FENE-P model are employed to characterize the rheological behavior of the non-Newtonian slime. Moreover, substratum beneath the slime is approximated by a multi-sinusoidal sheet. A hybrid computational technique to solve the second order DE with a system of algebraic equations is presented. The speed of organism, flow rate and energy loss at larger values of the involved parameters are simulated using bvp5c in conjunction with a modified Newton-Raphson technique (MNRT). The comparison of soft and rigid substrate, slip and no-slip boundary conditions, Newtonian and non-Newtonian slime is displayed in several figures. Streamlines pattern and velocity of the slime are also drawn for the realistic pairs of speed and flow rate and are thoroughly explained.

Differential transcriptome analysis of Sporocytophaga sp. CX11 and identification of candidate genes involved in lignocellulose degradation

Cellulose is the most abundant renewable bioresources on earth, and the biodegradation and utilization of cellulose would contribute to the sustainable development of global environment. Sporocytophaga species are common aerobic cellulose-degrading bacteria in soil, which can adhere to the surface of cellulose matrix and motile by gliding. In this study, a differential transcriptome analysis of Sporocytophaga sp. CX11 was performed and a total of 4,217 differentially expressed genes (DEGs) were identified. Gene Ontology enrichment results showed that there are three GO categories related to cellulose degradation function among the annotated DEGs. A total of 177 DEGs were identified as genes encoding carbohydrate-active enzymes (CAZymes), among which 54 significantly upregulated CAZymes were mainly cellulases, hemicellulases, pectinases, etc. 39 DEGs were screened to associate with gliding function. In order to explore unannotated genes potentially related to cellulose metabolism, cluster analysis was performed using the Short-Time Series Expression Miner algorithm (STEM). 281 unannotated genes were predicted to be associated with the initial-middle stage of cellulose degradation and 289 unannotated genes might function in the middle-last stage of cellulose degradation. Sporocytophaga sp. CX11 could produce extracellular endo-xylanase, endo-glucanase, FPase and β-glucosidase, respectively, according to different carbon source conditions. Altogether, this study provides valuable insights into the transcriptome information of Sporocytophaga sp. CX11, which would be useful to explore its application in biodegradation and utilization of cellulose resources.

Controlling kinetics of self-propelled rod-like swimmers near multi sinusoidal substrate

Motility is defined as the movement of cells by some form of self-propulsion. Some organisms motile by using long flagella that quickly rotate to propel them over various surfaces (in swarming and swimming mechanism), while few motile without the aid of flagella (in twitching, sliding and gliding mechanism). Among these modes, gliding motility is adopted by a rod-shaped organism famously known as gliding bacteria. It is hypothesized that in such type of motility, organism motile under their own power by secreting a layer of slime on the substrate. In this study, an active wall is considered as a substrate and a two-dimensional wavy sheet as an organism. Slip effects are also employed in the current work. The physical properties of the slime are governed by a suitable constitutive equation of couple stress model. A sixth order BVP is obtained by utilizing lubrication assumption. For an appropriate fixed pair of flow rate and organism speed the BVP is solved by MATLAB built-in function bvp-5c. This solution is utilized in the mechanical equilibrium conditions which are obviously not satisfied yet. To satisfy these conditions, the pair of flow rate and gliding speed is refined by a root finding algorithm (modified Newton-Raphson method). By employing this numerical scheme, various figures are shown to demonstrate the effect of several associated parameters on organism speed, flow rate, energy expended by the glider, streamlines and longitudinal velocity. It is observed from the graphical results that organism speed and energy consumption is directly proportional to the couple stress parameter and slip effects.

Biodesalination using halophytic cyanobacterium Phormidium keutzingianum from brackish to the hypersaline water

The biodesalination potential at different levels of salinity of Phormidium keutzingianum (P. keutzingianum) was investigated. A wide range of salinity from brackish to hypersaline water was explored in this study to ensure the adaptability of P. keutzingianum in extreme stress conditions. Brackish to hypersaline salt solutions were tested at selected NaCl concentrations 10, 30, 50, and 70 g.L-1. Chloride, pH, nitrate, and phosphate were the main parameters measured throughout the duration of the experiment. Biomass growth estimation revealed that the studied strain is adaptable to all the salinities inoculated. During the first growth phase (till day 20), chloride ion was removed up to 43.52% and 45.69% in 10 and 30 g.L-1 of salinity, respectively. Fourier transform infrared spectrometry analysis performed on P. keutzingianum showed the presence of active functional groups at all salinity levels, which resulted in biosorption leading to the bioaccumulation process. Samples for scanning electron microscopy (SEM) analysis supported with electron dispersive X-ray spectroscopy analysis (EDS) showed NaCl on samples already on day 0. This ensures the occurrence of the biosorption process. SEM-EDS results on 10th d showed evidence of additional ions deposited on the outer surface of P. keutzingianum. Calcium, magnesium, potassium, sodium, chloride, phosphorus, and iron were indicated in SEM-EDS analysis proving the occurrence of the biomineralization process. These findings confirmed that P. keutzingianum showed biomass production, biosorption, bioaccumulation, and biomineralization in all salinities; hence, the strain affirms the biodesalination process.

A computational approach to model gliding motion of an organism on a sticky slime layer over a solid substrate

Bacteria are microscopic single-celled microbes that can only be spotted via a microscope. They occur in a variety of shapes and sizes, and their dimensions are measured in micrometers (one-millionth of a meter). Bacterial categorization is based on a variety of features such as morphology, DNA sequencing, presence of flagella, cell structure, staining techniques, oxygen, and carbon-dioxide requirements. Due to these classifications, gliding bacteria are a miscellaneous class of rodlike microorganisms that cling and propel over ooze slime connected with a substrate. Without the assistance of flagella, which are essential parts of bacterial motility, the organism movement is adopted by waves streaming down the outer layer of this microorganism. To simulate the locomotion of such gliding microorganisms, a wavy sheet over Oldroyd-4 constant fluid is utilized. Under the long wavelength assumption, the equations regulating the flow of slime (modeled as Oldroyd-4 constant slime) beneath the cell/organism are developed. The quantities such as slime flow rate, cell speed, and propulsion power are computed by using bvp4c (MATLAB routine) integrated with the modified Newton-Rasphson technique. Furthermore, the flow patterns and velocity of the slime are graphically shown and thoroughly described using precise (calculated) values of the cell speed and velocity of the slime.

Structural mechanics of filamentous cyanobacteria

Filamentous cyanobacteria, forming long strands of connected cells, are one of the earliest and most successful forms of life on Earth. They exhibit self-organized behaviour, forming large-scale patterns in structures like biomats and stromatolites. The mechanical properties of these rigid structures have contributed to their biological success and are important to applications like algae-based biofuel production. For active polymers like these cyanobacteria, one of the most important mechanical properties is the bending modulus, or flexural rigidity. Here, we quantify the bending stiffness of three species of filamentous cyanobacteria, of order Oscillatoriales, using a microfluidic flow device where single filaments are deflected by fluid flow. This is complemented by measurements of Young's modulus of the cell wall, via nanoindentation, and the cell wall thickness. We find that the stiffness of the cyanobacteria is well-captured by a simple model of a flexible rod, with most stress carried by a rigid outer wall. Finally, we connect these results to the curved shapes that these cyanobacteria naturally take while gliding, and quantify the forces generated internally to maintain this shape. The measurements can be used to model interactions between cyanobacteria, or with their environment, and how their collective behaviour emerges from such interactions.

Mechanisms for bacterial gliding motility on soft substrates

The motility mechanism of certain prokaryotes has long been a mystery, since their motion, known as gliding, involves no external appendages. The physical principles behind gliding still remain poorly understood. Using myxobacteria as an example of such organisms, we identify here the physical principles behind gliding motility and develop a theoretical model that predicts a 2-regime behavior of the gliding speed as a function of the substrate stiffness. Our theory describes the elasto-capillary-hydrodynamic interactions between the membrane of the bacteria, the slime it secretes, and the soft substrate underneath. Defining gliding as the horizontal translation under zero net force, we find the 2-regime behavior is due to 2 distinct mechanisms of motility thrust. On mildly soft substrates, the thrust arises from bacterial shape deformations creating a flow of slime that exerts a pressure along the bacterial length. This pressure in conjunction with the bacterial shape provides the necessary thrust for propulsion. On very soft substrates, however, we show that capillary effects must be considered that lead to the formation of a ridge at the slime-substrate-air interface, thereby creating a thrust in the form of a localized pressure gradient at the bacterial leading edge. To test our theory, we perform experiments with isolated cells on agar substrates of varying stiffness and find the measured gliding speeds in good agreement with the predictions from our elasto-capillary-hydrodynamic model. The mechanisms reported here serve as an important step toward an accurate theory of friction and substrate-mediated interactions between bacteria proliferating in soft media.

Bacterial Gliding Motility: Rolling Out a Consensus Model

Some bacteria glide mysteriously on surfaces without using flagella, pili, or other external appendages. Recent studies suggest how gliding motors in the inner membrane may transduce force to the cell surface.

Defining motility in the Staphylococci

The ability of bacteria to move is critical for their survival in diverse environments and multiple ways have evolved to achieve this. Two forms of motility have recently been described for Staphylococcus aureus, an organism previously considered to be non-motile. One form is called spreading, which is a type of sliding motility and the second form involves comet formation, which has many observable characteristics associated with gliding motility. Darting motility has also been observed in Staphylococcus epidermidis. This review describes how motility is defined and how we distinguish between passive and active motility. We discuss the characteristics of the various forms of Staphylococci motility, the molecular mechanisms involved and the potential future research directions.

Staphylococcus aureus forms spreading dendrites that have characteristics of active motility

Staphylococcus aureus is historically regarded as a non-motile organism. More recently it has been shown that S. aureus can passively move across agar surfaces in a process called spreading. We re-analysed spreading motility using a modified assay and focused on observing the formation of dendrites: branching structures that emerge from the central colony. We discovered that S. aureus can spread across the surface of media in structures that we term ‘comets’, which advance outwards and precede the formation of dendrites. We observed comets in a diverse selection of S. aureus isolates and they exhibit the following behaviours: (1) They consist of phenotypically distinct cores of cells that move forward and seed other S. aureus cells behind them forming a comet ‘tail’; (2) they move when other cells in the comet tail have stopped moving; (3) the comet core is held together by a matrix of slime; and (4) the comets etch trails in the agar as they move forwards. Comets are not consistent with spreading motility or other forms of passive motility. Comet behaviour does share many similarities with a form of active motility known as gliding. Our observations therefore suggest that S. aureus is actively motile under certain conditions.

The mysterious nature of bacterial surface (gliding) motility: A focal adhesion-based mechanism in Myxococcus xanthus

Motility of bacterial cells promotes a range of important physiological phenomena such as nutrient detection, harm avoidance, biofilm formation, and pathogenesis. While much research has been devoted to the mechanism of bacterial swimming in liquid via rotation of flagellar filaments, the mechanisms of bacterial translocation across solid surfaces are poorly understood, particularly when cells lack external appendages such as rotary flagella and/or retractile type IV pili. Under such limitations, diverse bacteria at the single-cell level are still able to "glide" across solid surfaces, exhibiting smooth translocation of the cell along its long axis. Though multiple gliding mechanisms have evolved in different bacterial classes, most remain poorly characterized. One exception is the gliding motility mechanism used by the Gram-negative social predatory bacterium Myxococcus xanthus. The available body of research suggests that M. xanthus gliding motility is mediated by trafficked multi-protein (Glt) cell envelope complexes, powered by proton-driven flagellar stator homologues (Agl). Through coupling to the substratum via polysaccharide slime, Agl-Glt assemblies can become fixed relative to the substratum, forming a focal adhesion site. Continued directional transport of slime-associated substratum-fixed Agl-Glt complexes would result in smooth forward movement of the cell. In this review, we have provided a comprehensive synthesis of the latest mechanistic and structural data for focal adhesion-mediated gliding motility in M. xanthus, with emphasis on the role of each Agl and Glt protein. Finally, we have also highlighted the possible connection between the motility complex and a new type of spore coat assembly system, suggesting that gliding and cell envelope synthetic complexes are evolutionarily linked.

Outer Hair Cell Lateral Wall Structure Constrains the Mobility of Plasma Membrane Proteins

Nature’s fastest motors are the cochlear outer hair cells (OHCs). These sensory cells use a membrane protein, Slc26a5 (prestin), to generate mechanical force at high frequencies, which is essential for explaining the exquisite hearing sensitivity of mammalian ears. Previous studies suggest that Slc26a5 continuously diffuses within the membrane, but how can a freely moving motor protein effectively convey forces critical for hearing? To provide direct evidence in OHCs for freely moving Slc26a5 molecules, we created a knockin mouse where Slc26a5 is fused with YFP. These mice and four other strains expressing fluorescently labeled membrane proteins were used to examine their lateral diffusion in the OHC lateral wall. All five proteins showed minimal diffusion, but did move after pharmacological disruption of membrane-associated structures with a cholesterol-depleting agent and salicylate. Thus, our results demonstrate that OHC lateral wall structure constrains the mobility of plasma membrane proteins and that the integrity of such membrane-associated structures are critical for Slc26a5’s active and structural roles. The structural constraint of membrane proteins may exemplify convergent evolution of cellular motors across species. Our findings also suggest a possible mechanism for disorders of cholesterol metabolism with hearing loss such as Niemann-Pick Type C diseases.

Nature’s fastest motor is the cochlear outer hair cell (OHC) in the mammalian inner ear. These cells can contract and elongate thousands of times per second. Slc26a5 (prestin) is the essential protein in the fast motor and resides in the plasma membrane of OHC lateral wall. Slc26a5 undergoes voltage-dependent conformational changes associated with the rapid changes in cell length to increase mammalian hearing sensitivity. However, it remains unclear how Slc26a5 transfers the force created to the entire cell. In this study, we show the importance of association between Slc26a5 and specialized membrane structures of the OHC lateral wall. Mobility of Slc26a5 was normally constrained in membrane-associated structures and disruption of these structures by a cholesterol depleting reagent and salicylate liberated Slc26a5 and four other heterologously expressed membrane proteins. These observations provide evidence that OHC lateral wall structure constrains the mobility of plasma membrane proteins and such membrane-associated structures are critical for Slc26a5’s functional roles. Our findings also shed light on other cellular motors across species and suggest a mechanism for cholesterol metabolic disorders in humans.

Dissipative shocks behind bacteria gliding

Gliding is a means of locomotion on rigid substrates used by a number of bacteria, including myxobacteria and cyanobacteria. One of the hypotheses advanced to explain this motility mechanism hinges on the role played by the slime filaments continuously extruded from gliding bacteria. This paper solves, in full, a non-linear mechanical theory that treats as dissipative shocks both the point where the extruded slime filament comes into contact with the substrate, called the filament's foot, and the pore on the bacterium outer surface from where the filament is ejected. I prove that kinematic compatibility for shock propagation requires that the bacterium uniform gliding velocity (relative to the substrate) and the slime ejecting velocity (relative to the bacterium) must be equal, a coincidence that seems to have already been observed.

From individual cell motility to collective behaviors: insights from a prokaryote, Myxococcus xanthus

In bird flocks, fish schools, and many other living organisms, regrouping among individuals of the same kin is frequently an advantageous strategy to survive, forage, and face predators. However, these behaviors are costly because the community must develop regulatory mechanisms to coordinate and adapt its response to rapid environmental changes. In principle, these regulatory mechanisms, involving communication between individuals, may also apply to cellular systems which must respond collectively during multicellular development. Dissecting the mechanisms at work requires amenable experimental systems, for example, developing bacteria. Myxococcus xanthus, a Gram-negative delatproteobacterium, is able to coordinate its motility in space and time to swarm, predate, and grow millimeter-size spore-filled fruiting bodies. A thorough understanding of the regulatory mechanisms first requires studying how individual cells move across solid surfaces and control their direction of movement, which was recently boosted by new cell biology techniques. In this review, we describe current molecular knowledge of the motility mechanism and its regulation as a lead-in to discuss how multicellular cooperation may have emerged from several layers of regulation: chemotaxis, cell-cell signaling, and the extracellular matrix. We suggest that Myxococcus is a powerful system to investigate collective principles that may also be relevant to other cellular systems.

Uncovering the mystery of gliding motility in the myxobacteria

Bacterial gliding motility is the smooth movement of cells on solid surfaces unaided by flagella or pili. Many diverse groups of bacteria exhibit gliding, but the mechanism of gliding motility has remained a mystery since it was first observed more than a century ago. Recent studies on the motility of Myxococcus xanthus, a soil myxobacterium, suggest a likely mechanism for gliding in this organism. About forty M. xanthus genes were shown to be involved in gliding motility, and some of their protein products were labeled and localized within cells. These studies suggest that gliding motility in M. xanthus involves large multiprotein structural complexes, regulatory proteins, and cytoskeletal filaments. In this review, we summarize recent experiments that provide the basis for this emerging view of M. xanthus motility. We also discuss alternative models for gliding.

Coordinated, long-range, solid substrate movement of the purple photosynthetic bacterium Rhodobacter capsulatus

The long-range movement of Rhodobacter capsulatus cells in the glass-agar interstitial region of borosilicate Petri plates was found to be due to a subset of the cells inoculated into plates. The macroscopic appearance of plates indicated that a small group of cells moved in a coordinated manner to form a visible satellite cluster of cells. Satellite clusters were initially separated from the point of inoculation by the absence of visible cell density, but after 20 to 24 hours this space was colonized by cells apparently shed from a group of cells moving away from the point of inoculation. Cell movements consisted of flagellum-independent and flagellum-dependent motility contributions. Flagellum-independent movement occurred at an early stage, such that satellite clusters formed after 12 to 24 hours. Subsequently, after 24 to 32 hours, a flagellum-dependent dispersal of cells became visible, extending laterally outward from a line of flagellum-independent motility. These modes of taxis were found in several environmental isolates and in a variety of mutants, including a strain deficient in the production of the R. capsulatus acyl-homoserine lactone quorum-sensing signal. Although there was great variability in the direction of movement in illuminated plates, cells were predisposed to move toward broad spectrum white light. This predisposition was increased by the use of square plates, and a statistical analysis indicated that R. capsulatus is capable of genuine phototaxis. Therefore, the variability in the direction of cell movement was attributed to optical effects on light waves passing through the plate material and agar medium.

Gliding motility revisited: how do the myxobacteria move without flagella?

In bacteria, motility is important for a wide variety of biological functions such as virulence, fruiting body formation, and biofilm formation. While most bacteria move by using specialized appendages, usually external or periplasmic flagella, some bacteria use other mechanisms for their movements that are less well characterized. These mechanisms do not always exhibit obvious motility structures. Myxococcus xanthus is a motile bacterium that does not produce flagella but glides slowly over solid surfaces. How M. xanthus moves has remained a puzzle that has challenged microbiologists for over 50 years. Fortunately, recent advances in the analysis of motility mutants, bioinformatics, and protein localization have revealed likely mechanisms for the two M. xanthus motility systems. These results are summarized in this review.

Ultrastructure of Thiothrix spp. and "Type 021N" Bacteria

The ultrastructural features of two groups of filamentous sulfur bacteria, Thiothrix spp. and an unnamed organism designated "type 021N," were examined by transmission electron microscopy. Negative staining of whole cells and filaments with uranyl acetate revealed the presence of tufts of fimbriae located at the ends of individual gonidia of Thiothrix sp. strain A1 and "type 021N" strain N7. Holdfast material present at the center of mature rosettes was observed in thin sections stained with ruthenium red. A clearly defined sheath enveloped the trichomes of two of three Thiothrix strains but was absent from "type 021N" filaments. The outer cell wall appeared more complex in "type 021N" strains than in Thiothrix isolates. Bulbs or clusters of irregularly shaped cells, often present in filaments of "type 021N" bacteria, appeared to result from crosswalls which formed at angles oblique to the filament axis. The multicellular nature of these sulfur bacteria was apparent in that only the cytoplasmic membrane and peptidoglycan layer of the cell wall were involved in the septation process. Sulfur inclusions which developed in the presence of sodium thiosulfate were enclosed by a single-layered envelope and located within invaginations of the cytoplasmic membrane.

Sinorhizobium meliloti regulator MucR couples exopolysaccharide synthesis and motility

In order to enter symbiosis with its legume partner, Sinorhizobium meliloti requires regulatory systems for the appropriate responses to its environment. For example, motility is required for the chemotactic movement of bacteria toward the compounds released by its host, and exopolysaccharides (EPS) are required for bacterial attachment to the root or for invasion of the infection thread. Previous research has shown that ExoR/ExoS/ChvI as well as the ExpR/Sin quorum-sensing system inversely regulate both motility and EPS production, although the regulation mechanisms were unknown. We were able to attribute the ExpR-mediated regulation of motility to the ability of ExpR to bind a DNA sequence upstream of visN when activated by N-acyl-homoserine lactone. Furthermore, MucR, previously characterized as a regulator of EPS production, also affected motility. MucR inhibited expression of rem encoding an activator of motility gene expression and, consequently, the expression of Rem-regulated genes such as flaF and flgG. Binding of MucR to the rem promoter region was demonstrated and a sequence motif similar to the previously identified MucR binding consensus was identified within this region. The swarming ability of S. meliloti Rm2011 was shown to depend on a functional ExpR/Sin quorum-sensing system and the production of both flagella and EPS. Finally, we propose a model for the coordination of motility and EPS synthesis in S. meliloti.

Genetic circuitry controlling motility behaviors of Myxococcus xanthus

M. xanthus has a complex multicellular lifestyle including swarming, predation and development. These behaviors depend on the ability of the cells to achieve directed motility across solid surfaces. M. xanthus cells have evolved two motility systems including Type-IV pili that act as grappling hooks and a controversial engine involving mucus secretion and fixed focal adhesion sites. The necessity for cells to coordinate the motility systems and to respond rapidly to environmental cues is reflected by a complex genetic network involving at least three complete sets of chemosensory systems and eukaryotic-like signaling proteins. In this review, we discuss recent advances suggesting that motor synchronization results from spatial oscillations of motility proteins. We further propose that these dynamics are modulated by the action of multiple upstream complementary signaling systems. M. xanthus is thus an exciting emerging model system to study the intricate processes of directed cell migration.

Collagen's triglycine repeat number and phylogeny suggest an interdomain transfer event from a Devonian or Silurian organism into Trichodesmium erythraeum

Two competing effects at two vastly different scales may explain collagen’s current translation length. The necessity to have long molecules for maintaining mechanical integrity at the organism and supraorganism scales may be limited by the need to have small molecules capable of robust self-assembly at the nanoscale. The triglycine repeat regions of all 556 currently cataloged organisms with collagen-like genes were ranked by length. This revealed a sharp boundary in the GXY transcript number at 1032 amino acids (344 GXY repeats). An anomalous exception, however, is the intron-free Trichodesmium erythraeum collagen gene. Immunogold atomic force microscopy reveals, for the first time, the presence of a collagen-like protein in T. erythraeum. A phylogenetic protein sequence analysis which includes vertebrates, nonvertebrates, shrimp white spot syndrome virus, Streptococcus equi, and Bacillus cereus predicts that the collagen-like sequence may have emerged shortly after the divergence of fibrillar and nonfibrillar collagens. The presence of this anomalously long collagen gene within a prokaryote may represent an interdomain transfer from eukaryotes into prokaryotes that gives T. erythraeum the ability to form blooms that cover hundreds of square kilometers of ocean. We propose that the collagen gene entered the prokaryote intron-free only after it had been molded by years of mechanical selective pressure in larger organisms and only after large, dense food sources such as marine vertebrates became available. This anomalously long collagen-like sequence may explain T. erythraeum’s ability to aggregate and thus concentrate its toxin for food-source procurement.

SprB is a cell surface component of the Flavobacterium johnsoniae gliding motility machinery

Cells of the gliding bacterium Flavobacterium johnsoniae move rapidly over surfaces by an unknown mechanism. Transposon insertions in sprB resulted in cells that were defective in gliding. SprB is a highly repetitive 669-kDa cell surface protein, and antibodies against SprB inhibited the motility of wild-type cells. Polystyrene microspheres coated with antibodies against SprB attached to and were rapidly propelled along the cell surface, suggesting that SprB is one of the outermost components of the motility machinery. The movement of SprB along the cell surface supports a model of gliding motility in which motors anchored to the cell wall rapidly propel cell surface adhesins.

Cell surface filaments of the gliding bacterium Flavobacterium johnsoniae revealed by cryo-electron tomography

Flavobacterium johnsoniae cells glide rapidly over surfaces by an as-yet-unknown mechanism. Using cryo-electron tomography, we show that wild-type cells display tufts of approximately 5-nm-wide cell surface filaments that appear to be anchored to the inner surface of the outer membrane. These filaments are absent in cells of a nonmotile gldF mutant but are restored upon expression of plasmid-encoded GldF, a component of a putative ATP-binding cassette transporter.

Flavobacterium johnsoniae SprA is a cell surface protein involved in gliding motility

Flavobacterium johnsoniae cells glide rapidly over surfaces by an unknown mechanism. Transposon-induced sprA mutants formed nonspreading colonies on agar, and the cells examined in wet mounts were deficient in attachment to surfaces and were almost completely nonmotile. Exposure of intact cells to proteinase K cleaved the 270-kDa SprA into several large peptides, suggesting that it is partially exposed on the cell surface.

Gliding motility and polarized slime secretion

Myxococcus leaves a trail of slime on agar as it moves. A filament of slime can be seen attached to the end of a cell, but it is seen only at one end at any particular moment. To identify genes essential for A motility, transposon insertion mutations with defective A motility were studied. Fifteen of the 33 mutants had totally lost A motility. All these mutant cells had filaments of slime emerging from both ends, indicating that bipolar secretion prevents A motility. The remaining 18 A motility mutants, also produced by gene knockout, secreted slime only from one pole, but they swarmed at a lower rate than A(+) and are called 'partial' gliding mutants, or pgl. For each pgl mutant, the reduction in swarm expansion rate was directly proportional to the reduction in the coefficient of elasticotaxis. The pgl mutants have a normal reversal frequency and normal gliding speed when they move. But their probability of movement per unit time is lower than pgl(+) cells. Many of the pgl mutants are produced by transposon insertions in glycosyltransferase genes. It is proposed that these glycosyltransferases carry out the synthesis of a repeat unit polysaccharide that constitutes the slime.

A three-dimensional model of myxobacterial fruiting-body formation

Myxobacterial cells are social; they swarm by gliding on surfaces as they feed cooperatively. When they sense starvation, tens of thousands of cells change their movement pattern from outward spreading to inward concentration and form aggregates that become fruiting bodies. Cells inside fruiting bodies differentiate into round, nonmotile, environmentally resistant spores. Traditionally, cell aggregation has been considered to imply chemotaxis, a long-range cell interaction that shares many features of chemical reaction-diffusion dynamics. The biological evidence, however, suggests that Myxococcus xanthus aggregation is the consequence of direct cell-contact interactions that are different from chemotaxis. To test whether local interactions suffice to explain the formation of fruiting bodies and the differentiation of spores within them, we have simulated the process. In this article, we present a unified 3D model that reproduces in one continuous simulation all the stages of fruiting-body formation that have been experimentally observed: nonsymmetric initial aggregates (traffic jams), streams, formation of toroidal aggregates, hemispherical 3D mounds, and finally sporulation within the fruiting body.

Role of streams in myxobacteria aggregate formation

Cell contact, movement and directionality are important factors in biological development (morphogenesis), and myxobacteria are a model system for studying cell-cell interaction and cell organization preceding differentiation. When starved, thousands of myxobacteria cells align, stream and form aggregates which later develop into round, non-motile spores. Canonically, cell aggregation has been attributed to attractive chemotaxis, a long range interaction, but there is growing evidence that myxobacteria organization depends on contact-mediated cell-cell communication. We present a discrete stochastic model based on contact-mediated signaling that suggests an explanation for the initialization of early aggregates, aggregation dynamics and final aggregate distribution. Our model qualitatively reproduces the unique structures of myxobacteria aggregates and detailed stages which occur during myxobacteria aggregation: first, aggregates initialize in random positions and cells join aggregates by random walk; second, cells redistribute by moving within transient streams connecting aggregates. Streams play a critical role in final aggregate size distribution by redistributing cells among fewer, larger aggregates. The mechanism by which streams redistribute cells depends on aggregate sizes and is enhanced by noise. Our model predicts that with increased internal noise, more streams would form and streams would last longer. Simulation results suggest a series of new experiments.

Two-stage aggregate formation via streams in myxobacteria

In response to adverse conditions, myxobacteria form aggregates that develop into fruiting bodies. We model myxobacteria aggregation with a lattice cell model based entirely on short-range (nonchemotactic) cell-cell interactions. Local rules result in a two-stage process of aggregation mediated by transient streams. Aggregates resemble those observed in experiment and are stable against even very large perturbations. Noise in individual cell behavior increases the effects of streams and results in larger, more stable aggregates.

The junctional pore complex and the propulsion of bacterial cells

Gliding motility is defined as translocation in the direction of the long axis of the bacterium while in contact with a surface. This definition leaves unspecified any mechanism and, indeed, it appears that there is more than one physiological system underlying the same type of motion. Currently, two distinct mechanisms have been discovered in myxobacteria. One requires the extension, attachment, and retraction of type IV pili to pull the cell forwards. Recent experimental evidence suggests that a second mechanism for gliding motility involves the extrusion of slime from an organelle called the 'junctional pore complex'. This review discusses the role of slime extrusion and the junctional pore complex in the gliding motility of both cyanobacteria and myxobacteria.

Lanthanum fixation by Myxococcus xanthus: cellular location and extracellular polysaccharide observation

Myxococcus xanthus is a soil bacterium of the myxobacteria group and is abundant in almost all soils. Its role in soil ecology is considered significant. One noteworthy characteristic of the bacterium is that it produces large quantities of extracellular polymeric substances (EPS). It is also known that its biomass has the capacity to fix heavy metals. Here it is reported that M. xanthus was able to accumulate 0.6 mmol of La per g of wet biomass and/or 0.99 mmol per g of dry biomass. Transmission Electron Microscopy (TEM) observation of M. xanthus cells treated with La showed that a substantial amount of this cation was fixed in the EPS and in the cell wall. Smaller amounts were also observed in the cytoplasm. Fixed La appeared as phosphate in all cellular locations. The results given here also show that the use of La enables TEM observation of the M. xanthus EPS as a dense fibrillar net surrounding the cells. This technique is relatively easy and prevents EPS collapse, which occurs frequently during the fixation and dehydration procedures commonly used in preparations for TEM observations. Since antibodies are no longer required, the La stain can be carried out without delaying bacterial cell cultivation or isolation. In addition, the presence of La in cell cytoplasm without cell degeneration suggests that this microorganism could be used as a model in the study of bacteria-lanthanide interactions.

Mutations in Flavobacterium johnsoniae gldF and gldG disrupt gliding motility and interfere with membrane localization of GldA

Flavobacterium johnsoniae moves rapidly over surfaces by a process known as gliding motility. The mechanism of this form of motility is not known. Four genes that are required for F. johnsoniae gliding motility, gldA, gldB, gldD, and ftsX, have recently been described. GldA is similar to the ATP-hydrolyzing components of ATP binding cassette (ABC) transporters. Tn4351 mutagenesis was used to identify two additional genes, gldF and gldG, that are required for cell movement. gldF and gldG appear to constitute an operon, and a Tn4351 insertion in gldF was polar on gldG. pMK314, which carries the entire gldFG region, restored motility to each of the gldF and gldG mutants. pMK321, which expresses GldG but not GldF, restored motility to each of the gldG mutants but did not complement the gldF mutant. GldF has six putative membrane-spanning segments and is similar in sequence to channel-forming components of ABC transporters. GldG is similar to putative accessory proteins of ABC transporters. It has two apparent membrane-spanning helices, one near the amino terminus and one near the carboxy terminus, and a large intervening loop that is predicted to reside in the periplasm. GldF and GldG are involved in membrane localization of GldA, suggesting that GldA, GldF, and GldG may interact to form a transporter. F. johnsoniae gldA is not closely linked to gldFG, but the gldA, gldF, and gldG homologs of the distantly related gliding bacterium Cytophaga hutchinsonii are arranged in what appears to be an operon. The exact roles of F. johnsoniae GldA, GldF, and GldG in gliding are not known. Sequence similarities of GldA to components of other ABC transporters suggest that the Gld transporter may be involved in export of some material to the periplasm, outer membrane, or beyond.

Bacterial gliding motility: multiple mechanisms for cell movement over surfaces

The mechanisms responsible for bacterial gliding motility have been a mystery for almost 200 years. Gliding bacteria move actively over surfaces by a process that does not involve flagella. Gliding bacteria are phylogenetically diverse and are abundant in many environments. Recent results indicate that more than one mechanism is needed to explain all forms of bacterial gliding motility. Myxococcus xanthus "social gliding motility" and Synechocystis gliding are similar to bacterial "twitching motility" and rely on type IV pilus extension and retraction for cell movement. In contrast, gliding of filamentous cyanobacteria, mycoplasmas, members of the Cytophaga-Flavobacterium group, and "adventurous gliding" of M. xanthus do not appear to involve pili. The mechanisms of movement employed by these bacteria are still a matter of speculation. Genetic, biochemical, ultrastructural, and behavioral studies are providing insight into the machineries employed by these diverse bacteria that enable them to glide over surfaces.

Cloning and characterization of the Flavobacterium johnsoniae gliding motility genes gldD and gldE

Cells of Flavobacterium johnsoniae move over surfaces by a process known as gliding motility. The mechanism of this form of motility is not known. Cells of F. johnsoniae propel latex spheres along their surfaces, which is thought to be a manifestation of the motility machinery. Three of the genes that are required for F. johnsoniae gliding motility, gldA, gldB, and ftsX, have recently been described. Tn4351 mutagenesis was used to identify another gene, gldD, that is needed for gliding. Tn4351-induced gldD mutants formed nonspreading colonies, and cells failed to glide. They also lacked the ability to propel latex spheres and were resistant to bacteriophages that infect wild-type cells. Introduction of wild-type gldD into the mutants restored motility, ability to propel latex spheres, and sensitivity to bacteriophage infection. gldD codes for a cytoplasmic membrane protein that does not exhibit strong sequence similarity to proteins of known function. gldE, which lies immediately upstream of gldD, encodes another cytoplasmic membrane protein that may be involved in gliding motility. Overexpression of gldE partially suppressed the motility defects of a gldB point mutant, suggesting that GldB and GldE may interact. GldE exhibits sequence similarity to Borrelia burgdorferi TlyC and Salmonella enterica serovar Typhimurium CorC.

Frozen motion of gliding bacteria outlines inherent features of the motility apparatus

High-resolution data of actively gliding wild-type bacteria of four different species and of four different gliding mutants of Myxococcus xanthus were obtained from scanning electron micrographs. By shock freezing and freeze drying, motility-associated surface patterns could be fixed and consequently distinct intermediate states of motion could be observed for the first time. It is shown that these topographic patterns are immediately lost when gliding motility is stopped by blocking the respiratory chain with potassium cyanide or sodium azide. From the surface topography, the mode of action of the gliding apparatus of all four bacterial species examined can be described as a twisted circularly closed 'band'. During gliding, groups of nodes of the supertwisted apparatus show evidence of travelling like waves along the trichomes. However, the spacing between the nodes is not constant but varies within a certain range. This indicates that they are flexibly modulated as a consequence of the gliding state of the individual trichome.

Type IV pilus of Myxococcus xanthus is a motility apparatus controlled by the frz chemosensory system

Although flagella are the best-understood means of locomotion in bacteria [1], other bacterial motility mechanisms must exist as many diverse groups of bacteria move without the aid of flagella [2-4]. One unusual structure that may contribute to motility is the type IV pilus [5,6]. Genetic evidence indicates that type IV pili are required for social gliding motility (S-motility) in Myxococcus, and twitching motility in Pseudomonas and Neisseria [6,7]. It is thought that type IV pili may retract or rotate to bring about cellular motility [6,8], but there is no direct evidence for the role of pili in cell movements. Here, using a tethering assay, we obtained evidence that the type IV pilus of Myxococcus xanthus functions as a motility apparatus. Pili were required for M. xanthus cells to adhere to solid surfaces and to generate cellular movement using S-motility. Tethered cells were released from the surface at intervals corresponding to the reversal frequency of wild-type cells when gliding on a solid surface. Mutants defective in the control of directional movements and cellular reversals (frz mutants) showed altered patterns of adherence that correlate reversal frequencies with tethering. The behavior of the tethered cells was consistent with a model in which the pili are extruded from one cell pole, adhere to a surface, and then retract, pulling the cell in the direction of the adhering pili. Cellular reversals would result from the sites of pili extrusion switching from one cell pole to another and are controlled by the frz chemosensory system.

Gliding mutants of Mycoplasma mobile: relationships between motility and cell morphology, cell adhesion and microcolony formation

The present study characterizes gliding motility mutants of Mycoplasma mobile which were obtained by UV irradiation. They were identified by their abnormal colony shapes in 0.1% agar medium, showing a reduced number of satellite colonies compared to the wild-type. A total of ten mutants were isolated based on their colony phenotype. Using dark-field and electron microscopy, two classes of mutants, group I and group II, were defined. Cells of group I mutants had irregular, flexible and sometimes elongated head-like structures and showed a tendency to aggregate. Neither binding to glass nor gliding motility was observed in these mutants. Cells of group II mutants were rather spherical in shape, with the long axis reduced to 80% and the short axis enlarged to 120% of that of wild-type cells, respectively. Their gliding speed was 20% faster than that of wild-type cells. Three of the ten mutants remained unclassified. Mutant m6 had a reduced binding activity to glass and a reduced gliding motility with 50% of the speed of the wild-type strain. The ability of wild-type and mutant colonies to adsorb erythrocytes was found to correlate with the binding activity required for gliding, indicating that mycoplasma gliding depends on cytadherence-associated components. Finally, the ability to form microcolonies on surfaces was shown to correlate with the gliding activity, suggesting a certain role of gliding motility in the parasitic life-cycle of mycoplasmas.

Transposon insertions in the Flavobacterium johnsoniae ftsX gene disrupt gliding motility and cell division

Flavobacterium johnsoniae is a gram-negative bacterium that exhibits gliding motility. To determine the mechanism of flavobacterial gliding motility, we isolated 33 nongliding mutants by Tn4351 mutagenesis. Seventeen of these mutants exhibited filamentous cell morphology. The region of DNA surrounding the transposon insertion in the filamentous mutant CJ101-207 was cloned and sequenced. The transposon was inserted in a gene that was similar to Escherichia coli ftsX. Two of the remaining 16 filamentous mutants also carried insertions in ftsX. Introduction of the wild-type F. johnsoniae ftsX gene restored motility and normal cell morphology to each of the three ftsX mutants. CJ101-207 appears to be blocked at a late stage of cell division, since the filaments produced cross walls but cells failed to separate. In E. coli, FtsX is thought to function with FtsE in translocating proteins involved in potassium transport, and perhaps proteins involved in cell division, into the cytoplasmic membrane. Mutations in F. johnsoniae ftsX may prevent translocation of proteins involved in cell division and proteins involved in gliding motility into the cytoplasmic membrane, thus resulting in defects in both processes. Alternatively, the loss of gliding motility may be an indirect result of the defect in cell division. The inability to complete cell division may alter the cell architecture and disrupt gliding motility by preventing the synthesis, assembly, or functioning of the motility apparatus.

Cloning and characterization of the Flavobacterium johnsoniae gliding-motility genes gldB and gldC

The mechanism of bacterial gliding motility (active movement over surfaces without the aid of flagella) is not known. A large number of mutants of the gliding bacterium Flavobacterium johnsoniae (Cytophaga johnsonae) with defects in gliding motility have been previously isolated, and genetic techniques to analyze these mutants have recently been developed. We complemented a nongliding mutant of F. johnsoniae (UW102-99) with a library of wild-type DNA by using the shuttle cosmid pCP26. The complementing plasmid (pCP200) contained an insert of 26 kb and restored gliding motility to 4 of 50 independently isolated nongliding mutants. A 1.9-kb fragment which encompassed two genes, gldB and gldC, complemented all four mutants. An insertion mutation in gldB was polar on gldC, suggesting that the two genes form an operon. Disruption of the chromosomal copy of gldB in wild-type F. johnsoniae UW101 eliminated gliding motility. Introduction of the gldBC operon, or gldB alone, restored motility. gldB appears to be essential for F. johnsoniae gliding motility. It codes for a membrane protein that does not exhibit strong sequence similarity to other proteins in the databases. gldC is not absolutely required for gliding motility, but cells that do not produce GldC form colonies that spread less well than those of the wild type. GldC is a soluble protein and has weak sequence similarity to the fungal lectin AOL.

Sliding motility in mycobacteria

Mycobacteria are nonflagellated gram-positive microorganisms. Previously thought to be nonmotile, we show here that Mycobacterium smegmatis can spread on the surface of growth medium by a sliding mechanism. M. smegmatis spreads as a monolayer of cells which are arranged in pseudofilaments by close cell-to-cell contacts, predominantly along their longitudinal axis. The monolayer moves away from the inoculation point as a unit with only minor rearrangements. No extracellular structures such as pili or fimbriae appear to be involved in this process. The ability to translocate over the surface correlates with the presence of glycopeptidolipids, a mycobacterium-specific class of amphiphilic molecules located in the outermost layer of the cell envelope. We present evidence that surface motility is not restricted to M. smegmatis but is also a property of the slow-growing opportunistic pathogen M. avium. This form of motility could play an important role in surface colonization by mycobacteria in the environment as well as in the host.

β-lactam antibiotic selection of non-swarming mutants ofFlexibacter maritimus

Non-swarming mutants of Flexibacter maritimus appeared at high frequency on β-lactam antibiotic-containing medium. Among them were several phenotypes characterized by changes in cell surface properties and cell envelope proteins, in adhesion and in resistance to β-lactams, including increased sensitivity to these antibiotics.Key words: Flexibacter, gliding, adhesion, β-lactam, antibiotic resistance.

Gliding motility in bacteria: insights from studies of Myxococcus xanthus

Gliding motility is observed in a large variety of phylogenetically unrelated bacteria. Gliding provides a means for microbes to travel in environments with a low water content, such as might be found in biofilms, microbial mats, and soil. Gliding is defined as the movement of a cell on a surface in the direction of the long axis of the cell. Because this definition is operational and not mechanistic, the underlying molecular motor(s) may be quite different in diverse microbes. In fact, studies on the gliding bacterium Myxococcus xanthus suggest that two independent gliding machineries, encoded by two multigene systems, operate in this microorganism. One machinery, which allows individual cells to glide on a surface, independent of whether the cells are moving alone or in groups, requires the function of the genes of the A-motility system. More than 37 A-motility genes are known to be required for this form of movement. Depending on an additional phenotype, these genes are divided into two subclasses, the agl and cgl genes. Videomicroscopic studies on gliding movement, as well as ultrastructural observations of two myxobacteria, suggest that the A-system motor may consist of multiple single motor elements that are arrayed along the entire cell body. Each motor element is proposed to be localized to the periplasmic space and to be anchored to the peptidoglycan layer. The force to glide which may be generated here is coupled to adhesion sites that move freely in the outer membrane. These adhesion sites provide a specific contact with the substratum. Based on single-cell observations, similar models have been proposed to operate in the unrelated gliding bacteria Flavobacterium johnsoniae (formerly Cytophaga johnsonae), Cytophaga strain U67, and Flexibacter polymorphus (a filamentous glider). Although this model has not been verified experimentally, M. xanthus seems to be the ideal organism with which to test it, given the genetic tools available. The second gliding motor in M. xanthus controls cell movement in groups (S-motility system). It is dependent on functional type IV pili and is operative only when cells are in close proximity to each other. Type IV pili are known to be involved in another mode of bacterial surface translocation, called twitching motility. S-motility may well represent a variation of twitching motility in M. xanthus. However, twitching differs from gliding since it involves cell movements that are jerky and abrupt and that lack the organization and smoothness observed in gliding. Components of this motor are encoded by genes of the S-system, which appear to be homologs of genes involved in the biosynthesis, assembly, and function of type IV pili in Pseudomonas aeruginosa and Neisseria gonorrhoeae. How type IV pili generate force in S-motility is currently unknown, but it is to be expected that ongoing physiological, genetic, and biochemical studies in M. xanthus, in conjunction with studies on twitching in P. aeruginosa and N. gonorrhoeae, will provide important insights into this microbial motor. The two motility systems of M. xanthus are affected to different degrees by the MglA protein, which shows similarity to a small GTPase. Bacterial chemotaxis-like sensory transduction systems control gliding motility in M. xanthus. The frz genes appear to regulate gliding movement of individual cells and movement by the S-motility system, suggesting that the two motors found in this bacterium can be regulated to result in coordinated multicellular movements. In contrast, the dif genes affect only S-system-dependent swarming.

A new set of chemotaxis homologues is essential for Myxococcus xanthus social motility

Myxococcus xanthus cells aggregate and develop into multicellular fruiting bodies in response to starvation. A new M. xanthus locus, designated diffor defective in fruiting, was identified by the characterization of a mutant defective in fruiting body formation. Molecular cloning, DNA sequencing and sequence analysis indicate that the dif locus encodes a new set of chemotaxis homologues of the bacterial chemotaxis proteins MCPs (methyl-accepting chemotaxis proteins), CheW, CheY and CheA. The dif genes are distinct genetically and functionally from the previously identified M. xanthus frz chemotaxis genes, suggesting that multiple chemotaxis-like systems are required for the developmental process of M. xanthus fruiting body formation. Genetic analysis and phenotypical characterization indicate that the M. xanthus dif locus is required for social (S) motility. This is the first report of a M. xanthus chemotaxis-like signal transduction pathway that could regulate or co-ordinate the movement of M. xanthus cells to bring about S motility.

A gliding bacterium strain inhibits adhesion and motility of another gliding bacterium strain in a marine biofilm

Two species of gliding bacteria were isolated from a marine biofilm. They were described and identified as members of the genus Cytophaga. One of them (RB1057) produced an extracellular inhibitor of colony expansion of the other (RB1058). The inhibitor was characterized as a glycoprotein with an apparent molecular mass of 60 kDa. It inhibited RB1058 adhesion to and gliding on substrata. Motility and adhesion of several other aquatic gliding bacteria were not measurably affected by this agent.

Chemotaxis in a gliding bacterium

Myxococcus xanthus cells exhibit directed motility up phosphatidylethanolamine (PE) gradients, and we suggest that PE behaves as a chemoattractant. Computer-assisted stop-motion digital microscopy was used to record cell movements in slide culture. PE decreased cellular reversal frequency with molecular specificity that was correlated with the fatty acid composition. Synthetic dilauroyl (di C12:0) PE and dioleoyl (di C18:1 omega9c) PE suppressed direction reversals and stimulated movement up the gradient. Sensory adaptation occurred about 1 hr after the onset of stimulation. Null mutants in a methylated chemotaxis protein homolog (FrzCD) and a CheA/CheY homolog (FrzE) moved up a PE gradient at a reduced rate. The mutants displayed normal excitation but were defective in adaptation. A dominant, hyper-reversal mutant in the M. xanthus methyl accepting chemotaxis protein homolog, frzCD224, failed to respond to PE stimulation, which argued that PE was a transduced stimulus. Neither dilauroyl PE nor dioleoyl PE is present at high enough concentrations in vegetative or developmental PE to account for all of the chemotactic activity. It appears then that there are additional, as yet unknown, PE species that serve as autoattractants. We report on a discrete phospholipid chemoattractant in a gliding bacterium

Cloning and characterization of the Flavobacterium johnsoniae (Cytophaga johnsonae) gliding motility gene, gldA

The mechanism of bacterial gliding motility (active movement over surfaces without the aid of flagella) is not known. A large number of nonmotile mutants of the gliding bacterium Flavobacterium johnsoniae (Cytophaga johnsonae) have been previously isolated, and genetic techniques to analyze these mutants have recently been developed. We complemented a nonmotile mutant of F. johnsoniae (UW102-09) with a library of wild-type DNA by using the shuttle cosmid pCP17. The complementing plasmid (pCP100) contained an insert of 13 kbp, and restored motility to 4 of 61 independently isolated nonmotile mutants. A 1.3-kbp fragment that encompassed a single ORF, gldA, complemented all four mutants. Disruption of the chromosomal copy of gldA in wild-type F. johnsoniae UW101 eliminated gliding motility. The predicted protein produced by gldA has strong sequence similarity to ATP binding cassette transport proteins.