3D-Printed Protein-Based Bioplastics with Tunable Mechanical Properties Using Glycerol or Hyperbranched Poly(glycerol)s as Plasticizers

Protein-based materials can be engineered to derive utility from the structures and functions of the incorporated proteins. Modern methods of protein engineering bring promise of unprecedented control over molecular and network design, which will enable new and improved functionalities in materials that incorporate proteins as functional building blocks. For these advantages to be fully realized, there is a need for robust methods for producing protein-based networks, as well as methods for tuning their mechanical properties. Light-based 3D-printing techniques afford high-resolution fabrication capability with unparalleled design freedom in an inexpensive and decentralized capacity. This work features 3D-printed serum albumin-based bioplastics with mechanical properties modulated through the incorporation of glycerol or hyperbranched poly(glycerol)s (HPGs) as plasticizers. These materials capitalize upon important features of serum albumin, including its low intrinsic viscosity, high aqueous solubility, and relatively low cost. The incorporation of glycerol or HPGs of different sizes resulted in softer and more ductile bioplastics than those obtained natively without additives. These bioplastics showed shape-memory behavior and could be used to fabricate functional objects. These materials are accessible, possess minimal chemical hazards, and can be used for fabricating rigid and strong as well as soft and ductile parts using inexpensive commercial 3D printers.

Mesoporous Silica Microparticle-Protein Complexes: Effects of Protein Size and Solvent Properties on Diffusion and Loading Efficiency

Oral administration of protein-based therapeutics is highly desirable due to lower cost, enhanced patient compliance, and convenience. However, the harsh pH environment of the gastrointestinal tract poses significant challenges. Silica-based carriers have emerged as potential candidates for the delivery of protein molecules, owing to their tuneable surface area and pore volume. We explored the use of a commercial mesoporous silica carrier, SYLOID, for the delivery of octreotide and bovine serum albumin (BSA) using a solvent evaporation method in three different solvents. The loading of proteins into SYLOID was driven by diffusion, as described by the Stokes-Einstein equation. Various parameters were investigated, such as protein size, diffusion, and solubility. Additionally, 3D fluorescence confocal imaging was employed to identify fluorescence intensity and protein diffusion within the carrier. Our results indicated that the loading process was influenced by the molecular size of the protein as octreotide exhibited a higher recovery rate (71%) compared to BSA (32%). The methanol-based loading of octreotide showed uniform diffusion into the silica carrier, whereas water and ethanol loading resulted in the drug being concentrated on the surface, as shown by confocal imaging, and further confirmed by scanning electron microscopy (SEM). Pore volume assessment supported these findings, showing that octreotide loaded with methanol had a low pore volume (1.2 cc/g). On the other hand, BSA loading was affected by its solubility in the three solvents, its tendency to aggregate, and its low solubility in ethanol and methanol, which resulted in dispersed particle sizes of 223 and 231 μm, respectively. This reduced diffusion into the carrier, as confirmed by fluorescence intensity and diffusivity values. This study underscores the importance of protein size, solvent properties, and diffusion characteristics when using porous carriers for protein delivery. Understanding these factors allows for the development of more effective oral protein-based therapeutics by enhancing loading efficiency. This, in turn, will lead to advances in targeted drug delivery and improved patient outcomes.

Ultrasonic Sensor: A Fast and Non-Destructive System to Measure the Viscosity and Density of Molecular Fluids

This study presents the design and development of an ultrasonic sensor as a fundamental tool for characterizing the properties of fluids and biofluids. The analysis primarily focuses on measuring the electrical parameters of the system, which correlate with the density and viscosity of the solutions, in sample volumes of microliters and with high temporal resolution (up to 1 data point per second). The use of this sensor allows the fast and non-destructive evaluation of the viscosity and density of fluids deposited on its free surface. The measurements are based on obtaining the impedance versus frequency curve and the phase difference curve (between current and voltage) versus frequency. In this way, characteristic parameters of the transducer, such as the resonance frequency, phase, minimum impedance, and the quality factor of the resonant system, can characterize variations in density and viscosity in the fluid under study. The results obtained revealed the sensor's ability to identify two parameters sensitive to viscosity and two parameters sensitive to density. As a proof of concept, the unfolding of the bovine albumin protein was studied, resulting in a curve that reflects its unfolding kinetics in the presence of urea.

Determination of Hansen solubility parameters of water-soluble proteins using UV-vis spectrophotometry

Determination of solubility parameters by dissolution tests are difficult for some valuable molecules, such as proteins, where the quantities available are small, UV-vis spectroscopy can determine dissolved concentrations of even small amounts of material, but accurate determination of dissolution is difficult in relatively poor solvents, due to difficulty with constructing a reliable calibration curve. In this work we report a new simple procedure to determine the relative dissolution of proteins in various solvents using UV vis spectroscopy for the determination of Hansen solubility parameters (HSP) of proteins. This method allows qualitative determination of the amounts of BSA dissolved in various solvents. The amounts of BSA dissolved in each solvent, can then be used to rank solvents as good or bad for HSP calculation purpose, which gives more reliable ranking than observation alone in dissolution tests. To be able to evaluate the HSP of any solid material, the solubility of the tested material in a range of solvents needs to be determined. Solvents are then scored as good or bad based on observations and from the known properties of those solvents, the HSP of the solute molecule in question can be calculated. Here, bovine serum albumin (BSA) was used as a model protein, but the procedure reported here can be applied to any soluble protein or other macromolecule with a clear UV/vis adsorption peak. This procedure requires the tested material to be highly soluble in water, therefore eliminating the need for the preparation of many standard solutions of BSA in different solvents. Only a set of standard solutions of protein in water is required. UV-vis spectroscopy was used to analyze the remaining solid resuspended in water after centrifugation of solutions of BSA dissolved in other solvents to separate any undissolved protein. The HSP of BSA obtained via this procedure was compared to values previously obtained for BSA using other methods. A very good agreement between the HSP obtained in this work with the that reported by Houen et al. which used amino acid analysis for the estimation of the solubility of BSA in various organic solvents.

Spin-Label Electron Paramagnetic Resonance Spectroscopy Reveals Effects of Wastewater Filter Membrane Coated with Titanium Dioxide Nanoparticles on Bovine Serum Albumin

The accumulation of proteins in filter membranes limits the efficiency of filtering technologies for cleaning wastewater. Efforts are ongoing to coat commercial filters with different materials (such as titanium dioxide, TiO2) to reduce the fouling of the membrane. Beyond monitoring the desired effect of the retention of biomolecules, it is necessary to understand what the biophysical changes are in water-soluble proteins caused by their interaction with the new coated filter membranes, an aspect that has received little attention so far. Using spin-label electron paramagnetic resonance (EPR), aided with native fluorescence spectroscopy and dynamic light scattering (DLS), here, we report the changes in the structure and dynamics of bovine serum albumin (BSA) exposed to TiO2 (P25) nanoparticles or passing through commercial polyvinylidene fluoride (PVDF) membranes coated with the same nanoparticles. We have found that the filtering process and prolonged exposure to TiO2 nanoparticles had significant effects on different regions of BSA, and denaturation of the protein was not observed, neither with the TiO2 nanoparticles nor when passing through the TiO2-coated filter membranes.

Murine T-Cell Transfer Colitis as a Model for Inflammatory Bowel Disease

Inflammatory bowel disease (IBD) is a group of severe chronic inflammatory conditions of the human gastrointestinal tract. Murine models of colitis have been invaluable tools to improve the understanding of IBD development and pathogenesis. While the disease etiology of IBD is complex and multifactorial, CD4+ T helper cells have been shown to strongly contribute to the disease pathogenesis of IBD. Here, we present a detailed protocol of the preclinical model of T-cell transfer colitis, which can easily be utilized in the laboratory to study T helper cell functions in intestinal inflammation.

Physicochemical Parameters for Brea Gum Exudate from Cercidium praecox Tree

Brea gum (BG) is a hydrocolloid obtained as an exudate from the Cercidium praecox tree. The physicochemical properties of brea gum are similar to those of the arabic gum and, in many cases, the former can replace the latter. The brea gum was incorporated in 2013 into the Argentine Food Code because of its ancestral background and its current food uses. Brea gum could be also used as additive or excipient for pharmacological formulations. This work reports intrinsic viscosity, coil overlap, and Mark–Houwink–Kuhn–Sakurada (MHKS) parameters of BG solutions. Partially hydrolyzed BG solution was analyzed using intrinsic viscosity measurements, dynamic light scattering and size-exclusion chromatography (SEC). The MHKS parameters, a and k, were determined for BG at 25 °C, with values of 0.4133 and 0.1347 cm3 g−1, respectively. The viscometric molecular weight of BG was 1890 kg mol−1. The hydrodynamic parameters of BG were indicative of a hyperbranched structure and spherical conformation. The knowledge obtained on the physicochemical properties of brea gum favors its use in food and pharmaceutical applications.

Hydrodynamic Parameters of Strelitzia Gum

The flower of Strelitzia reginae generates abundant and viscous mucilage as exudate, which is purified in periods of heating–cooling, and finally precipitated with ethanol, obtaining strelitzia gum (StrG). By means of intrinsic viscosity measurement, the viscometric molecular weight (MWv) is determined, with a value of 200,000 g/mol, as well as a hydrodynamic radius of 20 ± 1 nm and a hydration value of 445 ± 34 g/g. The size of StrG was compared against dynamic light scattering data with a value of 16 ± 2 nm and a MWDLS of 230,000 g/mol. StrG is a biopolyelectrolyte with an “a” value of 0.85, which corresponds to a flexible behavior with a great effect of volume exclusion. This statement is based on the difficulty of gum dissolution, that should be performed at 80 °C. This macromolecule is very promising and can potentially be used in several industrial applications, such as in film forming, and as a gel, thickener, and coemulsifier.

Investigation of the magnetic field effect upon interpolymeric complexes formation based on bovine serum albumin and poly(aspartic acid)

The study presents a novel strategy for obtaining highly ordered interpolymeric complexes based on a protein, bovine serum albumin and a synthetic polymer, poly(aspartic acid). In this approach, experimental tests were carried out in the presence of a magnetic field of different intensities, namely 0.11 T and 0.3 T produced by permanent magnets. The influence of the magnetic force on the complexation process and the resulted self-assembled structures were studied by means of FTIR spectroscopy, X-ray diffraction, DLS, SEM microscopy and in vitro assay. The changes in the FTIR spectra acquired after 24 h of exposure were connected with conformational changes in the secondary structure and increased interactions between polymers, particularly when a higher intensity field was used. Due to a large anisotropy of magnetic susceptibility characteristic to both proteins and polypeptides, the magnetic field generated ordered assemblies consisting in globular structures of nanometric dimensions. This assembly strategy using magnets, along with remote manipulation capability can provide a versatile, contact-free, and inexpensive tool to create new, complex materials with tailorable characteristics.

Observation of dielectric universalities in albumin, cytochrome C and Shewanella oneidensis MR-1 extracellular matrix

The electrodynamics of metals is well understood within the Drude conductivity model; properties of insulators and semiconductors are governed by a gap in the electronic states. But there is a great variety of disordered materials that do not fall in these categories and still respond to external field in an amazingly uniform manner. At radiofrequencies delocalized charges yield a frequency-independent conductivity σ 1(ν) whose magnitude exponentially decreases while cooling. With increasing frequency, dispersionless conductivity starts to reveal a power-law dependence σ 1(ν)∝ν s with s < 1 caused by hopping charge carriers. At low temperatures, such Universal Dielectric Response can cross over to another universal regime with nearly constant loss ε″∝σ1/ν = const. The powerful research potential based on such universalities is widely used in condensed matter physics. Here we study the broad-band (1-1012 Hz) dielectric response of Shewanella oneidensis MR-1 extracellular matrix, cytochrome C and serum albumin. Applying concepts of condensed matter physics, we identify transport mechanisms and a number of energy, time, frequency, spatial and temperature scales in these biological objects, which can provide us with deeper insight into the protein dynamics.

Determination of the worst case for cleaning validation of equipment used in the radiopharmaceutical production of lyophilized reagents for 99mTc labeling

ABSTRACT Cleaning validation, a requirement of the current Good Manufacturing Practices (cGMP) for Drugs, consists of documented evidence that cleaning procedures are capable of removing residues to predetermined acceptance levels. This report describes a strategy for the selection of the worst case product for the production of lyophilized reagents (LRs) for labeling with 99mTc from the Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN/São Paulo). The strategy is based on the calculation of a "worst case index" that incorporates information about drug solubility, cleaning difficulty, and occupancy rate in the production line. It allowed a reduction in the required number of validations considering the possible manufacturing flow of a given product and the subsequent flow, thus facilitating the process by reducing operation time and cost. The products identified as "worst case" were LRs PUL-TEC and MIBI-TEC.

Controlling microencapsulation and release of micronized proteins using poly(ethylene glycol) and electrospraying

The fabrication of tailored microparticles for delivery of therapeutics is a challenge relying upon a complex interplay between processing parameters and materials properties. The emerging use of electrospraying allows better tailoring of particle morphologies and sizes than current techniques, critical to reproducible release profiles. While dry encapsulation of proteins is essential for the release of active therapeutics from microparticles, it is currently uncharacterized in electrospraying. To this end, poly(ethylene glycol) (PEG) was assessed as a micronizing and solubilizing agent for dry protein encapsulation and release from electrosprayed particles made from polycaprolactone (PCL). The physical effect of PEG in protein-loaded poly(lactic-co-glycolic acid) (PLGA) particles was also studied, for comparison. The addition of 5-15 wt% PEG 6 kDa or 35 kDa resulted in reduced PCL particle sizes and broadened distributions, which could be improved by tailoring the electrospraying processing parameters, namely by reducing polymer concentration and increasing flow rate. Upon micronization, protein particle size was reduced to the micrometer domain, resulting in homogenous encapsulation in electrosprayed PCL microparticles. Microparticle size distributions were shown to be the most determinant factor for protein release by diffusion and allowed specific control of release patterns.