Tailorable polyelectrolyte protein complex based on poly(aspartic acid) and bovine serum albumin

Membrane-Free Lateral Flow Assay with the Active Control of Fluid Transport for Ultrasensitive Cardiac Biomarker Detection

Membrane-based lateral flow immunoassays (LFAs) have been employed as early point-of-care (POC) testing tools in clinical settings. However, the varying membrane properties, uncontrollable sample transport in LFAs, visual readout, and required large sample volumes have been major limiting factors in realizing needed sensitivity and desirable precise quantification. Addressing these challenges, we designed a membrane-free system in which the desirable three-dimensional (3D) structure of the detection zone is imitated and used a small pump for fluid flow and fluorescence as readout, all the while maintaining a one-step assay protocol. A hydrogel-like protein-polyelectrolyte complex (PPC) within a polyelectrolyte multilayer (PEM) was developed as the test line by complexing polystreptavidin (pSA) with poly(diallyldimethylammonium chloride) (PDDA), which in turn was layered with poly(acrylic acid) (PAA) resulting in a superior 3D streptavidin-rich test line. Since the remainder of the microchannel remains material-free, good flow control is achieved, and with the total volume of 20 μL, 7.5-fold smaller sample volumes can be used in comparison to conventional LFAs. High sensitivity with desirable reproducibility and a 20 min total assay time were achieved for the detection of NT-proBNP in plasma with a dynamic range of 60-9000 pg·mL-1 and a limit of detection of 56 pg·mL-1 using probe antibody-modified fluorescence nanoparticles. While instrument-free visual detection is no longer possible, the developed lateral flow channel platform has the potential to dramatically expand the LFA applicability, as it overcomes the limitations of membrane-based immunoassays, ultimately improving the accuracy and reducing the sample volume so that finger-prick analyses can easily be done in a one-step assay for analytes present at very low concentrations.

Modulating Role of Co-Solutes in Complexation between Bovine Serum Albumin and Sodium Polystyrene Sulfonate

The action of three types of co-solutes: (i) salts (NaCl, NaBr, NaI), (ii) polymer (polyethylene glycol; PEG-400, PEG-3000, PEG-20000), and (iii) sugars (sucrose, sucralose) on the complexation between bovine serum albumin (BSA) and sodium polystyrene sulfonate (NaPSS) was studied. Three critical pH parameters were extracted from the pH dependence of the solution’s turbidity: pHc corresponding to the formation of the soluble complexes, pHΦ corresponding to the formation of the insoluble complexes, and pHopt corresponding to the charge neutralization of the complexes. In the presence of salts, the formation of soluble and insoluble complexes as well as the charge neutralization of complexes was hindered, which is a consequence of the electrostatic screening of attractive interactions between BSA and NaPSS. Distinct anion-specific trends were observed in which the stabilizing effect of the salt increased in the order: NaCl < NaBr < NaI. The presence of PEG, regardless of its molecular weight, showed no measurable effect on the formation of soluble complexes. PEG-400 and PEG-3000 showed no effect on the formation of insoluble complexes, but PEG-20000 in high concentrations promoted their formation due to the molecular crowding effect. The presence of sugar molecules had little effect on BSA-NaPSS complexation. Sucralose showed a minor stabilizing effect with respect to the onset of complex formation, which was due to its propensity to the protein surface. This was confirmed by the fluorescence quenching assay (Stern-Volmer relationship) and all-atom MD simulations. This study highlights that when evaluating the modulatory effect of co-solutes on protein-polyelectrolyte interactions, (co-solute)-protein interactions and their subsequent impact on protein aggregation must also be considered.

Hybrid chemoenzymatic heterogeneous catalyst prepared in one step from zeolite nanocrystals and enzyme-polyelectrolyte complexes

The combination of inorganic heterogeneous catalysts and enzymes, in so-called hybrid chemoenzymatic heterogeneous catalysts (HCEHCs), is an attractive strategy to effectively run chemoenzymatic reactions. Yet, the preparation of such bifunctional materials remains challenging because both the inorganic and the biological moieties must be integrated in the same solid, while preserving their intrinsic activity. Combining an enzyme and a zeolite, for example, is complicated because the pores of the zeolite are too small to accommodate the enzyme and a covalent anchorage on the surface is often ineffective. Herein, we developed a new pathway to prepare a nanostructured hybrid catalyst built from glucose oxidase and TS-1 zeolite. Such hybrid material can catalyse the in situ biocatalytic formation of H₂O₂, which is subsequently used by the zeolite to trigger the epoxidation of allylic alcohol. Starting from an enzymatic solution and a suspension of zeolite nanocrystals, the hybrid catalyst is obtained in one step, using a continuous spray drying method. While enzymes are expectedly unable to resist the conditions used in spray drying (temperature, shear stress, etc.), we leverage on the preparation of "enzyme-polyelectrolyte complexes" (EPCs) to increase the enzyme stability. Interestingly, the use of EPCs also prevents enzyme leaching and appears to stabilize the enzyme against pH changes. We show that the one-pot preparation by spray drying gives access to hybrid chemoenzymatic heterogeneous catalysts with unprecedented performance in the targeted chemoenzymatic reaction. The bifunctional catalyst performs much better than the two catalysts operating as separate entities. We anticipate that this strategy could be used as an adaptable method to prepare other types of multifunctional materials starting from a library of functional nanobuilding blocks and biomolecules.

Self-Assembled Nanocarriers Based on Modified Chitosan for Biomedical Applications: Preparation and Characterization

Protein-polysaccharide systems are of increasing interest as their combined attributes allow for fulfilling a broad range of applications in biomedical and pharmaceutical fields. In this study, the preparation of nanogels based on maleic anhydride chitosan derivatives (MAC) and bovine serum albumin (BSA) was achieved through a self-assembly process performed in aqueous phase. A series of experiments performed by varying the concentrations of MAC and BSA were conducted to find an appropriate mixing ratio for the polymer solutions leading to thermodynamically stable nanogels with the ability to encapsulate active compounds. The influence of temperature on the formation of nanogels was also studied. The consequent conformational changes were monitored using ultraviolet-visible (UV-VIS) spectrophotometry. The spectrophotometric investigations combined with diffraction light scattering (DLS) technique and zeta potential measurement results were correlated to determine the interaction mechanism and assess the self-assembling processes during nanogel formation. It was found that the hydrodynamic diameter (D_h) of the nanoparticles increased slightly at acidic pH, and the protonation of ionizable amino groups with the pH was confirmed by the zeta potential measurements. MAC/BSA nanogels also exhibited antimicrobial properties after being loaded with amoxicillin (Amox), which is an antibiotic used for the treatment of various infections. The experimental data resulting from this study provide theoretical guidance for the design and development of attractive nanocarriers for a large variety of biomedical applications.

Soybean-modified polyamide-6 mats as a long-term cutaneous wound covering

Engineered skin coverings have been adopted clinically to support extensive and deep wounds that result in fewer healthy skin remaining and therefore take longer to heal. Nonetheless, these biomaterials demand intensive labor and an expensive final cost. In comparison to conventional bandages, which do not meet all the requirements of wound care, electrospun fiber mats could potentially provide an excellent environment for healing. In this work, we developed two nanostructured scaffolds based on polyamide-6 (PA-6) to be tested as a wound covering in a rat model of full-thickness incisional wound healing. The central idea was to create a bioconstruct that is simple to implement and biologically safe, with a high survival rate, which provides physical support and biological recognition for new functional tissues. An unmodified PA-6 and a soybean-modified PA-6 were employed as nanofibrillar matrices in this study. The biomaterials showed a dimensional homology to natural extracellular matrix components and neither in vitro toxicity nor in vivo side effects. Both polymeric scaffolds were resistant to the sterilization process and could promote the attachment of 3T3 fibroblast cells, besides successfully incorporating the growth factor PDGF-BB, which had its bioactivity extended for up to 12 h under simulated conditions. The modification of PA-6 chains with a fatty acid derivative increased the scaffold's surface free energy, favoring cell proliferation, collagen formation, and ECM secretion. These results confirm the potential of these materials as a topical dermal covering for skin regeneration.

Biocompatible Materials Based on Plasticized Poly(lactic acid), Chitosan and Rosemary Ethanolic Extract I. Effect of Chitosan on the Properties of Plasticized Poly(lactic acid) Materials

The purpose of the present study is to develop new multifunctional environmentally friendly materials having applications both in medical and food packaging fields. New poly(lactic acid) (PLA)-based multifunctional materials containing additives derived from natural resources like chitosan (CS) and rosemary extract (R) were obtained by melt mixing. Each of the selected components has its own specific properties such as: PLA is a biodegradable thermoplastic aliphatic polyester derived from renewable biomass, heat-resistant, with mechanical properties close to those of polystyrene and polyethylene terephthalate, and CS offers good antimicrobial activity and biological functions, while R significantly improves antioxidative action necessary in all applications. A synergy of their combination, an optimum choice of their ratio, and processing parameters led to high performance antimicrobial/antioxidant/biocompatible/environmentally degradable materials. The polyethylene glycol (PEG)-plasticized PLA/chitosan/powdered rosemary extract biocomposites of various compositions were characterized in respect to their mechanical and rheological properties, structure by spectroscopy, antioxidant and antimicrobial activities, and in vitro and in vivo biocompatibility. Scanning electron microscopy images evidence the morphology features added by rosemary powder presence in polymeric materials. Incorporation of additives improved elongation at break, antibacterial and antioxidant activity and also biocompatibility. Migration of bioactive components into D1 simulant is slower for PEG-plasticized PLA containing 6 wt % chitosan and 0.5 wt % rosemary extract (PLA/PEG/6CS/0.5 R) biocomposite and it occurred by a diffusion-controlled mechanism. The biocomposites show high hydrophilicity and good in vitro and in vivo biocompatibility. No hematological, biochemical and immunological modifications are induced by subcutaneous implantation of biocomposites. All characteristics of the PEG-plasticized PLA-based biocomposites recommend them as valuable materials for biomedical implants, and as well as for the design of innovative drug delivery systems. Also, the developed biocomposites could be a potential nature-derived active packaging with controlled release of antimicrobial/antioxidant compounds.

Evaluation of the Rosemary Extract Effect on the Properties of Polylactic Acid-Based Materials

New multifunctional materials containing additives derived from natural resources as powdered rosemary ethanolic extract were obtained by melt mixing and processed in good conditions without degradation and loss of additives. Incorporation of powdered rosemary ethanolic extract (R) into poly(lactic acid) (PLA) improved elongation at break, rheological properties, antibacterial and antioxidant activities, in addition to the biocompatibility. The good accordance between results of the chemiluminescence method and radical scavenging activity determination by chemical method evidenced the increased thermoxidative stability of the PLA biocomposites with respect to neat PLA, with R acting as an antioxidant. PLA/R biocomposites also showed low permeability to gases and migration rates of the bioactive compounds and could be considered as high-performance materials for food packaging. In vitro biocompatibility based on the determination of surface properties demonstrated a good hydrophilicity, better spreading and division of fibroblasts, and increased platelet cohesion. The implantation of PLA/R pellets, was proven to possess a good in vivo biocompatibility, and resulted in similar changes in blood parameters and biochemical responses with the control group, suggesting that these PLA-based materials demonstrate very desirable properties as potential biomaterials, useful in human medicine for tissue engineering, wound management, orthopedic devices, scaffolds, drug delivery systems, etc. Therefore, PLA/R-based materials show promising properties for applications both in food packaging and as bioactive biomaterials.

Investigation of the magnetic field effect upon interpolymeric complexes formation based on bovine serum albumin and poly(aspartic acid)

The study presents a novel strategy for obtaining highly ordered interpolymeric complexes based on a protein, bovine serum albumin and a synthetic polymer, poly(aspartic acid). In this approach, experimental tests were carried out in the presence of a magnetic field of different intensities, namely 0.11 T and 0.3 T produced by permanent magnets. The influence of the magnetic force on the complexation process and the resulted self-assembled structures were studied by means of FTIR spectroscopy, X-ray diffraction, DLS, SEM microscopy and in vitro assay. The changes in the FTIR spectra acquired after 24 h of exposure were connected with conformational changes in the secondary structure and increased interactions between polymers, particularly when a higher intensity field was used. Due to a large anisotropy of magnetic susceptibility characteristic to both proteins and polypeptides, the magnetic field generated ordered assemblies consisting in globular structures of nanometric dimensions. This assembly strategy using magnets, along with remote manipulation capability can provide a versatile, contact-free, and inexpensive tool to create new, complex materials with tailorable characteristics.