Effects of undecylenic acid released from denture liner on Candida biofilms

Effectiveness of Antimicrobial Agents Incorporated into Soft Denture Liners: A Systematic Review

Integrating soft components into denture design may significantly enhance the comfort of edentulous patients. Microorganisms, particularly Candida albicans, often colonize soft denture lining materials, which can release metabolic and toxic byproducts linked to the development of Denture-Induced Stomatitis. This study aimed to evaluate the effectiveness of antimicrobial agents incorporated into soft denture liners in inhibiting the adhesion and colonization of C. albicans. A systematic review was conducted through MEDLINE-Pubmed, EMBASE, and the Cochrane Central Register of Controlled Trials. A range of keywords was employed without applying a time filter to identify relevant literature. The review revealed many studies investigating various antimicrobial compounds added to different soft denture liner materials, all demonstrating the ability to inhibit the proliferation of C. albicans. All the antimicrobial agents examined exhibited a significant antifungal effect, with minimal to negligible impact on the physical properties of the denture liners. However, it was noted that the mechanical properties of the liners were modified in direct correlation to the concentration of the antimicrobial agents utilized. The successful incorporation of these agents into various soft denture liners has been documented, with nystatin being the primary pharmacological agent identified across multiple studies. While incorporating antibacterial agents was deemed successful, it is essential to note that the methodologies employed yielded varying effects on the overall performance of the soft-liner materials.

Therapeutic Effect of Green Synthesized Silver Nanoparticles Using Erodium glaucophyllum Extract against Oral Candidiasis: In Vitro and In Vivo Study

Oral candidiasis (OC) is a fungal infection caused by an opportunistic fungi Candida albicans, which is found in the normal flora of healthy people. In this study, we examined the anti-candidal effect of green synthesized silver nanoparticles using leaf extract of Erodium glaucophyllum (EG-AgNPs) against C. albicans in vitro and in vivo. EG-AgNPs were synthesized for the first time using E. glaucophyllum extract and characterized by imaging (transmission electron microscopy (TEM), UV-VIS spectroscopy, zeta potential, X-ray diffraction (XRD), Energy dispersive x-ray analysis (EDX), and Fourier transform infrared spectroscopy (FTIR). A mouse model of OC was used for in vivo study. The agar well diffusion method showed the anti-candidal activity of EG-AgNPs against C. albicans with MIC 50 µg/mL. EG-AgNPs inhibited the dimorphic transition of C. albicans and suppressed the formation of biofilm by 56.36% and 52%, respectively. Additionally, EG-AgNPs significantly inhibited the production of phospholipases and proteinases by 30% and 45%, respectively. EG-AgNPs cause cytoplasm disintegration and deterioration of cell wall as imaged by SEM and TEM. Interestingly, EG-AgNPs did not display any cytotoxicity on the human gingival fibroblast-1 HGF-1 cell line at MIC concentrations. Topical treatment of the tongue of the OC mouse model with EG-AgNPs showed significant reduction in candidal tissue invasion, less inflammatory changes, and no tissue modification, in association with marked low scare and hyphal counts as compared to control group. In conclusion, our data demonstrated the potent inhibitory action of EG-AgNPs on the growth and morphogenesis of C. albicans in vitro and in vivo. Thus, EG-AgNPs represent a novel plausible therapeutic approach for treatment of OC.

Osmium Recovery as Membrane Nanomaterials through 10-Undecenoic Acid Reduction Method

The recovery of osmium from residual osmium tetroxide (OsO₄) is a necessity imposed by its high toxicity, but also by the technical-economic value of metallic osmium. An elegant and extremely useful method is the recovery of osmium as a membrane catalytic material, in the form of nanoparticles obtained on a polymeric support. The subject of the present study is the realization of a composite membrane in which the polymeric matrix is the polypropylene hollow fiber, and the active component consists of the osmium nanoparticles obtained by reducing an alcoholic solution of osmium tetroxides directly on the polymeric support. The method of reducing osmium tetroxide on the polymeric support is based on the use of 10-undecenoic acid (10-undecylenic acid) (UDA) as a reducing agent. The osmium tetroxide was solubilized in t-butanol and the reducing agent, 10-undecenoic acid (UDA), in i-propanol, t-butanol or n-decanol solution. The membranes containing osmium nanoparticles (Os-NP) were characterized morphologically by the following: scanning electron microscopy (SEM), high-resolution SEM (HR-SEM), structurally: energy-dispersive spectroscopy analysis (EDAX), Fourier transform infrared (FTIR) spectroscopy. In terms of process performance, thermal gravimetric analysis was performed by differential scanning calorimetry (TGA, DSC) and in a redox reaction of an organic marker, p-nitrophenol (PNP) to p-aminophenol (PAP). The catalytic reduction reaction with sodium tetraborate solution of PNP to PAP yielded a constant catalytic rate between 2.04 × 10^-4 mmol s^-1 and 8.05 × 10^-4 mmol s^-1.

Transport and Separation of the Silver Ion with n-decanol Liquid Membranes Based on 10-undecylenic Acid, 10-undecen-1-ol and Magnetic Nanoparticles

This paper presents a transport and recovery of silver ions through bulk liquid membranes based on n-decanol using as carriers 10-undecylenic acid and 10-undecylenyl alcohol. The transport of silver ions across membranes has been studied in the presence of two types of magnetic oxide nanoparticles obtained by the electrochemical method with iron electrodes in the electrolyte with and without silver ions, which act as promoters of turbulence in the membrane. Separation of silver ions by bulk liquid membranes using 10-undecylenic acid and 10-undecylenyl alcohol as carriers were performed by comparison with lead ions. The configuration of the separation module has been specially designed for the chosen separation process. Convective-generating magnetic nanoparticles were characterized in terms of the morphological and structural points of view: scanning electron microscopy (SEM), high-resolution SEM (HR-SEM), energy dispersive spectroscopy analysis (EDAX), Fourier Transform InfraRed (FTIR) spectroscopy, thermal gravimetric analysis (TGA), differential scanning calorimetry and magnetization. The process performance (flux and selectivity) was tested were tested for silver ion transport and separation through n-decanol liquid membranes with selected carriers. Under the conditions of the optimized experimental results (pH = 7 of the source phase, pH = 1 of the receiving phase, flow rate of 30 mL/min for the source phase and 9 mL/min for the receiving phase, 150 rot/min agitation of magnetic nanoparticles) separation efficiencies of silver ions of over 90% were obtained for the transport of undecenoic acid and about 80% for undecylenyl alcohol.

Yeast-Host Interactions: Anadenanthera colubrina Modulates Virulence Factors of C. albicans and Inflammatory Response In Vitro

Oral candidiasis is one of the most common fungal infections in humans. Its incidence has increased widely, as well as the antifungal resistance, demanding for the search for novel antifungal therapeutic agents. Anadenanthera colubrina (Vell.) Brenan is a plant species that has been proven to possess pharmacological effects, including antifungal and anti-inflammatory activities. This study evaluated in vitro the effects of standardized A. colubrina extract on virulence factors of Candida albicans and its regulation on immune response through C. albicans-host interaction. Antifungal activity was evaluated by Broth Microdilution Method against reference Candida strains (C. albicans, C. glabrata, C. tropicalis; C. dubliniensis). Anti-biofilm effect was performed on C. albicans mature biofilm and quantified by CFU/mL/g of biofilm dry weight. Proleotlytic enzymatic activities of proteinase and phospholipase were assessed by Azocasein and Phosphatidylcholine assays, respectively. Cytotoxicity effect was determined by Cell Titer Blue Viability Assay on Human Gingival Fibroblasts. Co-cultured model was used to analyze C. albicans coexisting with HGF by Scanning Electron Microscopy and fluorescence microscopies; gene expression was assessed by RT-PCR of C. albicans enzymes (SAP-1, PLB-1) and of host inflammatory cytokines (IL-6, IL-8, IL-1β, IL-10). Cytokines secretion was analysed by Luminex. The extract presented antifungal effect with MIC<15.62 μg/ml against Candida strains. Biofilm and proteolytic activity were significant reduced at 312.4 μg/ml (20 × 15.62 μg/ml) extract concentration. Cell viability was maintained higher than 70% in concentrations up to 250 μg/ml (LD50 = 423.3 μg/ml). Co-culture microscopies demonstrated a substantial decreased in C. albicans growth and minimal toxicity against host cells. Gene expressions of SAP-1/PLB-1 were significantly down-regulated and host immune response was modulated by a significant decreased on IL-6 and IL-8 cytokines secretion. A. colubrina had antifungal activity on Candida strains, antibiofilm, and anti-proteolytic enzyme effects against C. albicans. Presented low cytotoxicity to the host cells and modulatory effects on the host immune response.

In vitro evaluation of physicochemical properties of soft lining resins after incorporation of chlorhexidine

STATEMENT OF PROBLEM

Incorporating chlorhexidine into soft lining materials has been suggested to reduce biofilm development on the material surface and treat denture stomatitis. However, evaluation of the physicochemical properties of this material is necessary.

PURPOSE

The purpose of this in vitro study was to evaluate the physicochemical properties of resin-based denture soft lining materials modified with chlorhexidine diacetate (CDA).

MATERIAL AND METHODS

Two soft lining resins were tested, one based on polymethyl methacrylate (PMMA) and the other on polyethyl methacrylate (PEMA), into which 0.5%, 1.0%, or 2.0% of CDA was incorporated; the control group had no CDA. The specimens were stored for 2 hours, 48 hours, 7, 14, 21, and 28 days and then analyzed for polymer crystallinity, Shore A hardness, degree of monomer conversion, residual monomer leaching, and CDA release. Data were analyzed by using a 3-way ANOVA and the Tukey HSD test (α=.05).

RESULTS

The polymer crystallinity of PEMA and PMMA did not change after CDA incorporation. Shore A hardness increased over time, but not for any CDA concentrations tested after 28 days (P>.05). Considering the degree of conversion, PMMA-based resin showed no statistically significant difference (P>.05). However, PEMA-based resin showed a significant decrease (P<.05), which was reflected in a significant increase in residual monomer leaching from PEMA-based resin with the incorporation of 0.5% and 1.0% CDA (P<.05), mainly in the first 48 hours. PMMA-based resin showed no change in monomer leaching (P>.05). For both resins, the CDA release kinetics were related to monomer leaching; for PEMA-based resin, the values were significantly higher in the first 48 hours (P<.05), and for PMMA-based resin, the values were more sustained up to the last day of analysis.

CONCLUSIONS

The incorporation of CDA did not affect the physicochemical properties of soft resins. The properties of PMMA were better than those of PEMA.

Effect of Terminalia catappa Linn. on Biofilms of Candida albicans and Candida glabrata and on Changes in Color and Roughness of Acrylic Resin

This study aimed to investigate the effect of the n-butanol fraction of Terminalia catappa Linn., (FBuTC) on biofilm of Candida albicans and Candida glabrata, as well as changes in color and roughness of polymethyl methacrylate resin (PMMA). The susceptibility of C. albicans and C. glabrata to FBuTC was evaluated by means of the Minimum Inhibitory and Minimum Fungicidal Concentration (MIC and MFC). PMMA acrylic resin discs (N= 108) were fabricated. For the susceptibility tests, biofilms of C. albicans and C. glabrata were developed on discs for 48 h and immersed in phosphate-saline buffer solution (PBS), 1% sodium hypochlorite (SH 1%), or FBuTC at MIC, 5xMIC, or 10xMIC. For the color and roughness change tests, the discs were immersed in distilled water, SH 1%, or FBuTC in the concentrations of 0.25 mg/mL, 2.5 mg/mL, or 25.0 mg/mL. After 28 days of incubation, color change was evaluated by spectrophotometry and roughness, by using a profilometer. The biofilms were investigated by one-way ANOVA and, the color and roughness changes (two-way ANOVA and the Tukey test; α=0.05). For both MIC and MFC the value of 0.25 mg/mL of FBuTC was observed for the planktonic cells of C. albicans and C. glabrata. Exposure to FBuTC at 10xMIC had a significant effect on the biofilm of C. albicans, showing a reduction in cell counts when compared with PBS, (p=0.001). For the biofilm of C. glabrata, the MIC was sufficient for significantly reducing the cell count (p<0.001). No important changes in color and roughness of the acrylic resin were observed, even after 28 days, irrespective of the concentration of FBuTC used (p >0.05). It could be concluded that the immersion of acrylic resin for dental prosthesis in FBuTC was effective in reducing the biofilms of C. albicans and C. glabrata without evidence of change in roughness and color of this substrate.

Susceptibility to Medium-Chain Fatty Acids Is Associated with Trisomy of Chromosome 7 in Candida albicans

Aneuploidy (changes in chromosome number) and loss of heterozygosity (LOH) occur frequently in the human-pathogenic yeast Candida albicans and are associated with adaptation to stress and to antifungal drugs. Aneuploidy and LOH can also be induced during laboratory manipulations, such as during genetic transformation. We find that C. albicans strain SN152, commonly used to generate gene deletions, has undergone a major LOH event on chromosome 2. One deletion strain generated in this background has acquired extra copies of chromosomes 5 and 7. We find that trisomy (three copies) of chromosome 7 is associated with sensitivity to fatty acids.

Fatty acids have known antifungal effects and are used in over-the-counter topical treatments. Screening of a collection of gene knockouts in Candida albicans revealed that one strain, carrying a deletion of the transcription factor DAL81, is very susceptible to the medium-chain fatty acid undecanoic acid. However, reintroducing DAL81 does not restore resistance, and editing DAL81 in a different background does not introduce sensitivity. Whole-genome sequencing revealed that the C. albicansdal81Δ/Δ strain has an extra copy of chromosomes 5 and 7. Reversion to resistance to undecanoic acid was induced by growing the sensitive strain in yeast extract-peptone-dextrose with 60 μg/ml undecanoic acid for up to 9 days. Nine isolates that regained some resistance to undecanoic acid lost one copy of chromosome 7. The copy number of chromosome 5 does not appear to affect resistance to fatty acids. Moreover, the sensitivity may be related to having two copies of haplotype B of chromosome 7. In addition, we find that C. albicans strain SN152, used to delete DAL81 and many other genes, has undergone a major loss of heterozygosity event on chromosome 2 and a smaller one on chromosome 3.

IMPORTANCE Aneuploidy (changes in chromosome number) and loss of heterozygosity (LOH) occur frequently in the human-pathogenic yeast Candida albicans and are associated with adaptation to stress and to antifungal drugs. Aneuploidy and LOH can also be induced during laboratory manipulations, such as during genetic transformation. We find that C. albicans strain SN152, commonly used to generate gene deletions, has undergone a major LOH event on chromosome 2. One deletion strain generated in this background has acquired extra copies of chromosomes 5 and 7. We find that trisomy (three copies) of chromosome 7 is associated with sensitivity to fatty acids.

Synergistic Antifungal Effect of Amphotericin B-Loaded Poly(Lactic-Co-Glycolic Acid) Nanoparticles and Ultrasound against Candida albicans Biofilms

Candida albicans is a human opportunistic pathogen that causes superficial and life-threatening infections. An important reason for the failure of current antifungal drugs is related to biofilm formation, mostly associated with implanted medical devices. The present study investigated the synergistic antifungal efficacy of low-frequency and low-intensity ultrasound combined with amphotericin B (AmB)-loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles (AmB-NPs) against C. albicans biofilms. AmB-NPs were prepared by a double-emulsion method and demonstrated lower toxicity than free AmB. We then established biofilms and treated them with ultrasound and AmB-NPs separately or jointly in vitro and in vivo The results demonstrated that the activity, biomass, and proteinase and phospholipase activities of biofilms were decreased significantly after the combination treatment of AmB-NPs with 42 kHz of ultrasound irradiation at an intensity of 0.30 W/cm² for 15 min compared with the controls, with AmB alone, or with ultrasound treatment alone (P < 0.01). The morphology of the biofilms was altered remarkably after joint treatment based on confocal laser scanning microscopy (CLSM), especially in regard to reduced thickness and loosened structure. Furthermore, the same synergistic effects were found in a subcutaneous catheter biofilm rat model. The number of CFU from the catheter exhibited a significant reduction after joint treatment with AmB-NP and ultrasound for seven continuous days, and CLSM and scanning electron microscopy (SEM) images revealed that the biofilm on the catheter surface was substantially eliminated. This method may provide a new noninvasive, safe, and effective therapy for C. albicans biofilm infection.

Fungal-Host Interaction: Curcumin Modulates Proteolytic Enzyme Activity of Candida albicans and Inflammatory Host Response In Vitro

Current treatments for Candida albicans infection are limited due to the limited number of antifungal drugs available and the increase in antifungal resistance. Curcumin is used as a spice, food preservative, flavoring, and coloring agent that has been shown to have many pharmacological activities. Thus, this study evaluated the modulatory effects of curcumin on major virulence factors associated with the pathogenicity of C. albicans. The minimum inhibitory concentration (MIC) of curcumin against C. albicans (SC5314) was determined. Biofilm formation was quantified and the proteinase and phospholipase secretion was measured. The cytotoxicity was tested in oral fibroblast cells. A cocultured model was used to analyze the gene expression of proinflammatory cytokines (IL-1β, IL-1α, and IL-6) from host cells, as well SAP-1 and PLB-1 by RT-PCR. The MIC was between 6.25 and 12.5 µM, and the activity of proteinase enzyme was significantly decreased in biofilms treated with curcumin. However, proteinase gene expression was not downregulated after curcumin treatment. Furthermore, gene expressions of host inflammatory response, IL-1β and IL-1α, were significantly downregulated after exposure to curcumin. In conclusion, curcumin exhibited antifungal activity against C. albicans and modulated the proteolytic enzyme activities without downregulating the gene expression. In host inflammatory response, curcumin downregulated IL-1β and IL-1α gene expression.

Hexosomes with Undecylenic Acid Efficient against Candida albicans

Due to the growing issues with fungal infections, especially with Candida, there is still a need to develop novel anti-Candida materials. One of the known antifungal agents is undecylenic acid (UA), which still cannot be efficiently used due to its oily nature, and thus limited solubility. By taking advantage of the properties of UA, we developed an emulsion with hexagonal phase, i.e., hexosomes, whose structure and morphology was studied by small-angle X-ray scattering and cryo-electron microscopy, respectively. The presence of UA in the hexosome was confirmed by spectroscopy. Moreover, we studied the anti-Candida effect of hexosomes and their cytotoxicity toward human cells. The minimal inhibitory concentration for the 50% and 90% Candida-growth reduction was found at 0.01 and 0.16 wt % hexosomes, respectively (i.e., 2 and 32 pghex/C.a.cell, respectively). The percentage of metabolically active Candida was reduced by 72-96% at hexosome concentrations of 1.0-8.2 pghex/C.a.cell as compared to untreated Candida. Furthermore, at the same concentration range the embedded filamentation test after 24 and 48 h showed the inhibition of both the filamentation and growth of Candida, while the preliminary toxicity test showed that hexosomes were nontoxic for human cells. All these render the here-developed hexosomes with UA efficient and promising anti-Candida agents.

Fungicidal PMMA-Undecylenic Acid Composites

Undecylenic acid (UA), known as antifungal agent, still cannot be used to efficiently modify commercial dental materials in such a way that this affects Candida. Actually, issues with Candida infections and fungal resistance compromise the use of Poly(methyl-methacrylate) (PMMA) as dental material. The challenge remains to turn PMMA into an antifugal material, which can ideally affect both sessile (attached) and planktonic (free-floating) Candida cells. We aimed to tackle this challenge by designing PMMA-UA composites with different UA concentrations (3-12%). We studied their physico-chemical properties, the antifungal effect on Candida and the cytotoxicity toward human cells. We found that UA changes the PMMA surface into a more hydrophilic one. Mainly, as-preparation composites with ≥6% UA reduced sessile Candida for >90%. After six days, the composites were still efficiently reducing the sessile Candida cells (for ~70% for composites with ≥6% UA). Similar results were recorded for planktonic Candida. Moreover, the inhibition zone increased along with the UA concentration. The antifungal effect of UA was also examined at the surface of an UA-loaded agar and the minimal inhibitory concentration (MIC90) was below the lowest-studied 0.0125% UA. Furthermore, the embedded filamentation test after 24 h and 48 h showed complete inhibition of the Candida growth at 0.4% UA.

Biological and structural effects of the conjugation of an antimicrobial decapeptide with saturated, unsaturated, methoxylated and branched fatty acids

The increasing bacterial resistance against conventional antibiotics has led to the search for new antimicrobial drugs with different modes of action. Cationic antimicrobial peptides (AMPs) and lipopeptides are promising candidates to treat infections because they act on bacterial membranes causing rapid destruction of sensitive bacteria. In this study, a decapeptide named A2 (IKQVKKLFKK) was conjugated at the N-terminus with saturated, unsaturated, methoxylated and methyl -branched fatty acids of different chain lengths (C8 - C20), the antimicrobial and structural properties of the lipopeptides being then investigated. The attachment of the fatty acid chain significantly improved the antimicrobial activity of A2 against bacteria, and so, endowed it with moderated antifungal activity against yeast strains belonging to genus Candida. Lipopeptides containing hydrocarbon chain lengths between C8 and C14 were the best antibacterial compounds (MIC = 0.7 to 5.8 μM), while the most active compounds against yeast were A2 conjugated with methoxylated and enoic fatty acids (11.1 to 83.3 μM). The improvement in antimicrobial activity was mainly related to the amphipathic secondary structure adopted by A2 lipopeptides in the presence of vesicles that mimic bacterial membranes. Peptide conjugation with long hydrocarbon chains (C12 or more), regardless of their structure, significantly increased toxicity towards eukaryotic cells, resulting in a loss of selectivity. These findings suggest that A2-derived lipopeptides are potential good candidates for the treatment of infectious diseases caused by bacteria and opportunistic pathogenic yeast belonging to genus Candida. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.

In vitro Effects of Lemongrass Extract on Candida albicans Biofilms, Human Cells Viability, and Denture Surface

The purpose of this study was to investigate whether immersion of a denture surface in lemongrass extract (LGE) has effects on C. albicans biofilms, human cell viability and denture surface. Minimal inhibitory concentration (MIC) and minimal fungicidal concentration (MFC) were performed for LGE against C. albicans. For biofilm analysis, discs were fabricated using a denture acrylic resin with surface roughness standardization. C. albicans biofilms were developed on saliva-coated discs, and the effects of LGE at MIC, 5XMIC, and 10XMIC were investigated during biofilm formation and after biofilm maturation. Biofilms were investigated for cell counting, metabolic activity, and microscopic analysis. The cytotoxicity of different concentrations of LGE to peripheral blood mononuclear cells (PBMC) was analyzed using MTT. The effects of LGE on acrylic resin were verified by measuring changes in roughness, color and flexural strength after 28 days of immersion. Data were analyzed by ANOVA, followed by a Tukey test at a 5% significance level. The minimal concentration of LGE required to inhibit C. albicans growth was 0.625 mg/mL, while MFC was 2.5 mg/mL. The presence of LGE during biofilm development resulted in a reduction of cell counting (p < 0.05), which made the MIC sufficient to reduce approximately 90% of cells (p < 0.0001). The exposure of LGE after biofilm maturation also had a significant antifungal effect at all concentrations (p < 0.05). When compared to the control group, the exposure of PBMC to LGE at MIC resulted in similar viability (p > 0.05). There were no verified differences in color perception, roughness, or flexural strength after immersion in LGE at MIC compared to the control (p > 0.05). It could be concluded that immersion of the denture surface in LGE was effective in reducing C. albicans biofilms with no deleterious effects on acrylic properties at MIC. MIC was also an effective and safe concentration for use.

In vitro evaluation of antifungal activity of monolaurin against Candida albicans biofilms

Monolaurin (also known as glycerol monolaurate) is a natural compound found in coconut oil and is known for its protective biological activities as an antimicrobial agent. The nature of oral candidiasis and the increased antifungal resistance demand the search for novel antifungal therapeutic agents. In this study, we examine the antifungal activity of monolaurin against Candida albicans biofilms (strain ATCC:SC5314/MYA2876) in vitro and investigate whether monolaurin can alter gene expression of host inflammatory cytokines, IL-1α and IL-1β. In a co-culture model, oral fibroblast cells were cultured simultaneously with C. albicans for 24 hrs followed by the exposure to treatments of monolaurin (3.9–2,500 µM), positive control fluconazole (32.2 µM), and vehicle control group (1% ethanol), which was a model used to evaluate the cytotoxicity of monolaurin on fibroblasts as well as to analyze morphological characteristics of biofilms through fluorescence microscopy. In addition, the co-culture model was used for RNA extraction of oral fibroblasts to assess gene expression of host inflammatory cytokines, using quantitative real-time PCR. Our results showed the MIC and MFC of monolaurin were in the range 62.5–125 µM and 125–250 µM, respectively. Biofilm antifungal assay showed significant reduction in Log (CFU/ml) of biofilms treated with 1,250 and 2,500 µM of 1-monolaurin when compared to the control groups . There was also a significant down-regulation of IL-1α and IL-1β in the co-culture treated with monolaurin. It can be concluded that monolaurin has a potential antifungal activity against C. albicans and can modulate the pro-inflammatory response of the host.

In Vitro and In Vivo Antifungal Activity of Lichochalcone-A against Candida albicans Biofilms

Oral candidiasis (OC) is an opportunistic fungal infection with high prevalence among immunocompromised patients. Candida albicans is the most common fungal pathogen responsible for OC, often manifested in denture stomatitis and oral thrush. Virulence factors, such as biofilms formation and secretion of proteolytic enzymes, are key components in the pathogenicity of C. albicans. Given the limited number of available antifungal therapies and the increase in antifungal resistance, demand the search for new safe and effective antifungal treatments. Lichochalcone-A is a polyphenol natural compound, known for its broad protective activities, as an antimicrobial agent. In this study, we investigated the antifungal activity of lichochalcone-A against C. albicans biofilms both in vitro and in vivo. Lichochalcone-A (625 μM; equivalent to 10x MIC) significantly reduced C. albicans (MYA 2876) biofilm growth compared to the vehicle control group (1% ethanol), as indicated by the reduction in the colony formation unit (CFU)/ml/g of biofilm dry weight. Furthermore, proteolytic enzymatic activities of proteinases and phospholipases, secreted by C. albicans were significantly decreased in the lichochalcone-A treated biofilms. In vivo model utilized longitudinal imaging of OC fungal load using a bioluminescent-engineered C. albicans (SKCa23-ActgLUC) and coelenterazine substrate. Mice treated with lichochalcone-A topical treatments exhibited a significant reduction in total photon flux over 4 and 5 days post-infection. Similarly, ex vivo analysis of tongue samples, showed a significant decrease in CFU/ml/mg in tongue tissue sample of lichochalcone-A treated group, which suggest the potential of lichochalcone-A as a novel antifungal agent for future clinical use.

Synthesis and characterization of anti-bacterial and anti-fungal citrate-based mussel-inspired bioadhesives

Bacterial and fungal infections in the use of surgical devices and medical implants remain a major concern. Traditional bioadhesives fail to incorporate anti-microbial properties, necessitating additional anti-microbial drug injection. Herein, by the introduction of the clinically used and inexpensive anti-fungal agent, 10-undecylenic acid (UA), into our recently developed injectable citrate-based mussel-inspired bioadhesives (iCMBAs), a new family of anti-bacterial and anti-fungal iCMBAs (AbAf iCs) was developed. AbAf iCs not only showed strong wet tissue adhesion strength, but also exhibited excellent in vitro cyto-compatibility, fast degradation, and strong initial and considerable long-term anti-bacterial and anti-fungal ability. For the first time, the biocompatibility and anti-microbial ability of sodium metaperiodate (PI), an oxidant used as a cross-linking initiator in the AbAf iCs system, was also thoroughly investigated. Our results suggest that the PI-based bioadhesives showed better anti-microbial properties compared to the unstable silver-based bioadhesive materials. In conclusion, AbAf iCs family can serve as excellent anti-bacterial and anti-fungal bioadhesive candidates for tissue/wound closure, wound dressing, and bone regeneration, especially when bacterial or fungal infections are a major concern.

Reduction of Candida biofilm adhesion by incorporation of prereacted glass ionomer filler in denture base resin

OBJECTIVES

This study investigated the influence of surface reaction-type prereacted glass ionomer (S-PRG) fillers on Candida albicans adhesion on denture base resin.

METHODS

Discs were prepared by incorporating the S-PRG filler into the polymer powder of a polymethyl methacrylate (PMMA)-based, heat-polymerizing resin at 0 (control), 5%, 10%, and 20% (w/w). The surface roughness of all disc surfaces was measured. Elemental analysis of released Na(+), Sr(2+), SiO3(2-), Al(3-), BO3(3-), and F(-) was performed after water immersion. Each disc was placed in a well with artificial saliva to form acquired pellicle, incubated, washed with phosphate-buffered saline, and immersed in a C. albicans (JCM2085) cell suspension standardized at 10(4) cells/ml. After aerobic incubation at 37 °C for 24 h, the metabolic mitochondrial activity, total biofilm biomass, and biofilm thickness were evaluated. The morphogenetic transition of C. albicans in the early culture stage (1 and 3 h) was observed.

RESULTS

There was a slight but significant increase in the surface roughness with an increase in the filler content. The metabolic activity and total biomass volume were significantly lower in all filler groups than in the control group, although there were no significant differences among the filler groups. Groups with at least 5% filler content exhibited a thinner biofilm compared with the control group. All filler groups showed hyphal forms at 3 h, with the length of the hyphae being lesser than those in the control group.

CONCLUSIONS

Although the incorporation of S-PRG filler slightly increases the surface roughness of denture base resin, it reduces the adhesion of C. albicans.

CLINICAL SIGNIFICANCE

The S-PRG filler has the potential to reduce Candida albicans adhesion on denture base resin and may lower the risk of denture stomatitis. However, filler incorporation can increase the surface roughness of heat-polymerizing denture base resin.

Candida albicans biofilms and MMA surface treatment influence the adhesion of soft denture liners to PMMA resin

The effect of Candida albicans biofilms and methyl methacrylate (MMA) pretreatment on the bond strength between soft denture liners and polymethyl methacrylate (PMMA) resin was analyzed. Specimens were prepared and randomly divided with respect to PMMA pretreatment, soft liner type (silicone-based or PMMA-based), and presence or absence of a C. albicans biofilm. Samples were composed of a soft denture liner bonded between two PMMA bars. Specimens (n = 10) were incubated to produce a C. albicans biofilm or stored in sterile PBS for 12 days. The tensile bond strength test was performed and failure type was determined using a stereomicroscope. Surface roughness (SR) and scanning electron microscopy (SEM) analysis were performed on denture liners (n = 8). Highest bond strength was observed in samples containing a silicone-based soft liner and stored in PBS, regardless of pretreatment (p < 0.01). Silicone-based specimens mostly underwent adhesive failures, while samples containing PMMA-based liners predominantly underwent cohesive failures. The silicone-based specimens SR decreased after 12 days of biofilm accumulation or PBS storage, while the SR of PMMA-based soft liners increased (p < 0.01). The PMMA-based soft liners surfaces presented sharp valleys and depressions, while silicone-based specimens surfaces exhibited more gentle features. In vitro exposure to C. albicans biofilms reduced the adhesion of denture liners to PMMA resin, and MMA pretreatment is recommended during relining procedures.

Efficacious intestinal permeation enhancement induced by the sodium salt of 10-undecylenic acid, a medium chain fatty acid derivative

10-undecylenic acid (UA) is an OTC antifungal therapy and a nutritional supplement. It is an unsaturated medium chain fatty acid (MCFA) derivative, so our hypothesis was that its 11-mer sodium salt, uC11, would improve intestinal permeation similar to the established enhancer, sodium caprate (C10), but without the toxicity of the parent saturated MCFA, decylenic acid (C11). MTT assay and high-content screening (HCS) confirmed a cytotoxicity ranking in Caco-2 cells: C11 > C10 = uC11. Five to ten millimolars of the three agents reduced TEER and increased the Papp of [(14)C]-mannitol across Caco-2 monolayers and rat intestinal mucosae, a concentration that matched increases in plasma membrane permeability seen in HCS. Although C11 was the most efficacious enhancer in vitro, it damaged monolayers and tissue mucosae more than the other two agents at similar concentrations and exposure times and was therefore not pursued further. Rat jejunal and colonic in situ intestinal instillations of 100 mM C10 or uC11 with FITC-dextran 4000 (FD4) solutions yielded comparable regional enhancement ratios of ~10 and 30%, respectively, for each agent with acceptable tissue histology. Mini-tablets of uC11 and FD4 however delivered more FD4 compared to C10-FD-4 mini-tablets in both regions, as reflected by a statistically higher AUC, and with no evidence of membrane perturbation. The unsaturated bond in uC11 therefore confers a reduction in lipophilicity and cytotoxicity compared to C11, and the resulting permeation enhancement is on a par with or superior to that of C10, a key component of formulations in current phase II oral peptide clinical trials.

Resins-based denture soft lining materials modified by chlorhexidine salt incorporation: an in vitro analysis of antifungal activity, drug release and hardness

OBJECTIVES

To evaluate the in vitro growth inhibition of Candida albicans, the rate of chlorhexidine release and shore A hardness from resins-based denture soft lining materials modified by chlorhexidine diacetate (CDA) or chlorhexidine hydrochloride (CHC) incorporation.

METHODS

Resin discs were prepared from soft denture liners based on poly (methyl methacrylate) (PMMA) or poly (ethyl methacrylate) (PEMA) containing 0.5, 1.0 and 2.0 wt.% of CDA or CHC. For antifungal activity resin discs were placed on agar plates inoculated with C. albicans, after 48 h at 37°C the diameters of inhibition zones were measured. For the chlorhexidine release, discs were immersed into distilled water at 37°C, and spectral measurements were made after 48 h. Shore A hardness was evaluated at the baseline, 2 and 7 days, using 6mm thick rectangular specimens also immersed into distilled water at 37°C. Data were statistically processed by SigmaStat software using ANOVA and all pairwise multiple comparison procedures was done using the Holm-Sidak method, with α=0.05 (p<0.001).

RESULTS

CDA added to PMMA soft liner and PEMA soft liner had a dose-related inhibitory effect on C. albicans and on chlorhexidine release rate (p<0.001). The PMMA and PEMA hardness increased statistically by time but not for the different CDA concentrations. CHC had no inhibitory effect on C. albicans.

SIGNIFICANCE

Chlorhexidine diacetate released from resins-based soft lining materials can be convenient to reduce the biofilm development on the material surface and treat denture stomatitis, without depending on patient compliance.

Exopolysaccharide matrix of developed Candida albicans biofilms after exposure to antifungal agents

This study aimed to evaluate the effects of fluconazole or nystatin exposure on developed Candida albicans biofilms regarding their exopolysaccharide matrix. The minimal inhibitory concentration (MIC) against fluconazole or nystatin was determined for C. albicans reference strain (ATCC 90028). Poly(methlymethacrylate) resin (PMMA) specimens were fabricated according to the manufacturer's instructions and had their surface roughness measured. Biofilms were developed on specimens surfaces for 48 h and after that were exposed during 24 h to fluconazole or nystatin prepared in a medium at MIC, 10 x MIC or 100 x MIC. Metabolic activity was evaluated using an XTT assay. Production of soluble and insoluble exopolysaccharide and intracellular polysaccharides was evaluated by the phenol-sulfuric method. Confocal laser scanning microscope was used to evaluate biofilm architecture and percentage of dead/live cells. Data were analyzed statistically by ANOVA and Tukey's test at 5% significance level. The presence of fluconazole or nystatin at concentrations higher than MIC results in a great reduction of metabolic activity (p<0.001). At MIC or 10 x MIC, fluconazole showed high amounts of intracellular polysaccharides (p<0.05), but did not affect the exopolysaccharide matrix (p>0.05). The exposure to nystatin also did not alter the exopolysaccharide matrix at all the tested concentrations (p>0.05). Biofilm architecture was not affected by either of the antifungal agents (p>0.05). Nystatin promoted higher proportion of dead cells (p<0.05). It may be concluded that fluconazole and nystatin above the MIC concentration reduced the metabolic activity of C. albicans biofilms; however, they were not able to alter the exopolysaccharide matrix and biofilm architecture.

Dietary carbohydrates modulate Candida albicans biofilm development on the denture surface

The purpose of this study was to investigate whether dietary carbohydrates can modulate the development of Candida albicans biofilms on the denture material surface. Poly (methyl methacrylate) acrylic resin discs were fabricated and had their surface roughness measured. Biofilms of C.albicans ATCC 90028 were developed on saliva-coated specimens in culture medium without (control) or with carbohydrate supplementation by starch, starch+sucrose, glucose, or sucrose for 72 h. The cell count, metabolic activity, biovolume, average thickness, and roughness coefficient were evaluated at the adhesion phase (1.5 h) and after 24, 48, and 72 h. The secretion of proteinases and phospholipases, cell surface energy, and production of extra/intracellular polysaccharides were analyzed after 72 h of biofilm development. Data were analyzed by one- and two-way ANOVA followed by Tukey’s test at 5% significance level. In the early stages of colonization (adhesion and 24 h), the glucose group showed the highest cell counts and metabolic activity among the groups (p<0.05). After maturation (48 and 72 h), biofilms exposed to glucose, sucrose, or starch+sucrose showed higher cell counts and metabolic activity than the control and starch groups (p<0.001). Compared to the control group, biofilms developed on starch or starch+sucrose had more proteinase activity (p<0.001), whereas biofilms developed on glucose or sucrose had more phospholipase activity (p<0.05). Exposure to starch+sucrose increased the production of extracellular and intracellular polysaccharides (p<0.05). Biofilms developed on starch or without carbohydrate supplementation presented cells with more hydrophobic behavior compared to the other groups. Confocal images showed hyphae forms on biofilms exposed to starch or starch+sucrose. Within the conditions studied, it can be concluded that dietary carbohydrates can modulate biofilm development on the denture surface by affecting virulence factors and structural features.