Tissue-engineering-based strategies for regenerative endodontics

Dental pulp regeneration strategies: A review of status quo and recent advances

Microorganisms, physical factors such as temperature or mechanical injury, and chemical factors such as free monomers from composite resin are the main causes of dental pulp diseases. Current clinical treatment methods for pulp diseases include the root canal therapy, vital pulp therapy and regenerative endodontic therapy. Regenerative endodontic therapy serves the purpose of inducing the regeneration of new functional pulp tissues through autologous revascularization or pulp tissue engineering. This article first discusses the current clinical methods and reviews strategies as well as the research outcomes regarding the pulp regeneration. Then the in vivo models, the prospects and challenges for regenerative endodontic therapy were further discussed.

Revolutionizing Endodontics: Innovative Approaches for Treating Mature Teeth With Closed Apices and Apical Lesions: A Report of Two Cases

INTRODUCTION

Modern tissue engineering strategies have elucidated the potential of regenerative endodontic treatment (RET) as an alternative for treating mature teeth.

METHODS

Here, we report two cases in which cell-based RET (CB-RET) using encapsulated allogeneic umbilical cord mesenchymal stem cells (UC-MSCs) in a platelet-poor plasma (PPP)-based scaffold was used in two mature teeth with pulp necrosis and apical periodontitis.

RESULTS

After 5 years of follow-up, the healing response was satisfactory in both cases, with evidence of pulp revitalization.

CONCLUSIONS

This is the first study to report the success of an extended, 5-year follow-up for allogeneic CB-RET. This report presents an innovative and sustainable solution to challenging endodontic scenarios.

GelMA-based hydrogel biomaterial scaffold: A versatile platform for regenerative endodontics

Endodontic therapy, while generally successful, is primarily limited to mature teeth, hence the pressing need to explore regenerative approaches. Gelatin methacryloyl (GelMA) hydrogels have emerged as pivotal biomaterials, promising a bright future for dental pulp regeneration. Despite advancements in tissue engineering and biomaterials, achieving true pulp tissue regeneration remains a formidable task. GelMA stands out for its injectability, rapid gelation, and excellent biocompatibility, serving as the cornerstone of scaffold materials. In the pursuit of dental pulp regeneration, GelMA holds significant potential, facilitating the delivery of stem cells, growth factors, and other vital substances crucial for tissue repair. Presently, in the field of dental pulp regeneration, researchers have been diligently utilizing GelMA hydrogels as engineering scaffolds to transport various effective substances to promote pulp regeneration. However, existing research is relatively scattered and lacks comprehensive reviews and summaries. Therefore, the primary objective of this article is to elucidate the application of GelMA hydrogels as regenerative scaffolds in this field, thereby providing clear direction for future researchers. Additionally, this article provides a comprehensive discussion on the synthesis, characterization, and application of GelMA hydrogels in root canal therapy regeneration. Furthermore, it offers new application strategies and profound insights into future challenges, such as optimizing GelMA formulations to mimic the complex microenvironment of pulp tissue and enhancing its integration with host tissues.

Effect of magnesium oxide nanoparticles and LED irradiation on the viability and differentiation of human stem cells of the apical papilla

PURPOSE

Currently, regenerative endodontic treatments are gaining more and more attention, and stem cells play a significant role in these treatments. In order to enhance stem cell proliferation and differentiation, a variety of methods and materials have been used. The purpose of this study was to determine the effects of magnesium oxide nanoparticles and LED irradiation on the survival and differentiation of human stem cells from apical papilla.

METHODS

The MTT test was used to measure the cell survival of SCAPs that had been exposed to different concentrations of magnesium oxide nanoparticles after 24 and 48 h, and the concentration with the highest cell survival rate was picked for further studies. The cells were classified into four distinct groups based on their treatment: (1) control, which received no exposure, (2) exposure to magnesium oxide nanoparticles, (3) exposure to light emitting diode (LED) irradiation (635 nm, 200 mW/cm2) for 30 s, (4) exposure simultaneously with magnesium oxide nanoparticles and LED irradiation. A green approach was employed to synthesize magnesium oxide nanoparticles. Quantitative real time PCR was used to measure the gene expression of osteo/odontogenic markers such as BSP, DSPP, ALP and DMP1 in all four groups after treatment, and Alizarin red S staining (ARS) was used to determine the osteogenic differentiation of SCAPs by demonstrating the Matrix mineralization.

RESULTS

The highest viability of SCAPs was observed after 24 h in concentration 1 and 10 µg/mL and after 48 h in concentration 1 µg/mL, which were not significantly different from the control group. In both times, the survival of SCAPs decreased with increasing concentration of magnesium oxide nanoparticles (MgONPs). According to the results of Real-time PCR, after 24 and 48 h, the highest differentiation of BSP, DMP1, ALP and DSPP genes was observed in the LED + MgONPs group, followed by MgONPs and then LED, and in all 3 experimental groups, it was significantly higher than control group (P < 0.05). Also, after 24 and 48 h, the density of ARS increased in all groups compared to the control group, and the highest density was observed in the MgONPs + LED and MgONPs groups.

CONCLUSION

This research concluded that exposure to SCAPs, MgONPs, and LED irradiation has a significant effect on enhancing gene expression of odontogenic/osteogenic markers and increasing matrix mineralization.

Recent advances in additive manufacturing of patient-specific devices for dental and maxillofacial rehabilitation

OBJECTIVES

Customization and the production of patient-specific devices, tailoring the unique anatomy of each patient's jaw and facial structures, are the new frontiers in dentistry and maxillofacial surgery. As a technological advancement, additive manufacturing has been applied to produce customized objects based on 3D computerized models. Therefore, this paper presents advances in additive manufacturing strategies for patient-specific devices in diverse dental specialties.

METHODS

This paper overviews current 3D printing techniques to fabricate dental and maxillofacial devices. Then, the most recent literature (2018-2023) available in scientific databases reporting advances in 3D-printed patient-specific devices for dental and maxillofacial applications is critically discussed, focusing on the major outcomes, material-related details, and potential clinical advantages.

RESULTS

The recent application of 3D-printed customized devices in oral prosthodontics, implantology and maxillofacial surgery, periodontics, orthodontics, and endodontics are presented. Moreover, the potential application of 4D printing as an advanced manufacturing technology and the challenges and future perspectives for additive manufacturing in the dental and maxillofacial area are reported.

SIGNIFICANCE

Additive manufacturing techniques have been designed to benefit several areas of dentistry, and the technologies, materials, and devices continue to be optimized. Image-based and accurately printed patient-specific devices to replace, repair, and regenerate dental and maxillofacial structures hold significant potential to maximize the standard of care in dentistry.

Injectable Tissue-Specific Hydrogel System for Pulp-Dentin Regeneration

The quest for finding a suitable scaffold system that supports cell survival and function and, ultimately, the regeneration of the pulp-dentin complex remains challenging. Herein, we hypothesized that dental pulp stem cells (DPSCs) encapsulated in a collagen-based hydrogel with varying stiffness would regenerate functional dental pulp and dentin when concentrically injected into the tooth slices. Collagen hydrogels with concentrations of 3 mg/mL (Col3) and 10 mg/mL (Col10) were prepared, and their stiffness and microstructure were assessed using a rheometer and scanning electron microscopy, respectively. DPSCs were then encapsulated in the hydrogels, and their viability and differentiation capacity toward endothelial and odontogenic lineages were evaluated using live/dead assay and quantitative real-time polymerase chain reaction. For in vivo experiments, DPSC-encapsulated collagen hydrogels with different stiffness, with or without growth factors, were injected into pulp chambers of dentin tooth slices and implanted subcutaneously in severe combined immunodeficient (SCID) mice. Specifically, vascular endothelial growth factor (VEGF [50 ng/mL]) was loaded into Col3 and bone morphogenetic protein (BMP2 [50 ng/mL]) into Col10. Pulp-dentin regeneration was evaluated by histological and immunofluorescence staining. Data were analyzed using 1-way or 2-way analysis of variance accordingly (α = 0.05). Rheology and microscopy data revealed that Col10 had a stiffness of 8,142 Pa with a more condensed and less porous structure, whereas Col3 had a stiffness of 735 Pa with a loose microstructure. Furthermore, both Col3 and Col10 supported DPSCs' survival. Quantitative polymerase chain reaction showed Col3 promoted significantly higher von Willebrand factor (VWF) and CD31 expression after 7 and 14 d under endothelial differentiation conditions (P < 0.05), whereas Col10 enhanced the expression of dentin sialophosphoprotein (DSPP), alkaline phosphatase (ALP), runt-related transcription factor 2 (Runx2), and collagen 1 (Col1) after 7, 14, and 21 d of odontogenic differentiation (P < 0.05). Hematoxylin and eosin and immunofluorescence (CD31 and vWF) staining revealed Col10+Col3+DPSCs+GFs enhanced pulp-dentin tissue regeneration. In conclusion, the collagen-based concentric construct modified by growth factors guided the specific lineage differentiation of DPSCs and promoted pulp-dentin tissue regeneration in vivo.

Allogeneic Bone Marrow Mesenchymal Stromal Cell Transplantation Induces Dentin Pulp Complex-like Formation in Immature Teeth with Pulp Necrosis and Apical Periodontitis

INTRODUCTION

Dental pulp regeneration is challenging in endodontics. Cellular therapy is an alternative approach to induce dental pulp regeneration. Mesenchymal stromal cells (MSCs) have the capacity to induce dental pulp-like tissue formation. In this study, we evaluated the capacity of allogeneic bone marrow MSCs (BM-MSCs) to regenerate pulp following necrosis and apical periodontitis in children's permanent immature apex teeth.

METHODS

Patients aged 8 to 12 years with pulp necrosis and apical periodontitis were evaluated. The study included 15 teeth (13 incisors and 2 molars) from 14 patients (8 boys and 6 girls). Radiographic evaluation showed periapical radiolucency and immature apex teeth. There was no response to cold or electric pulp testing. The root canal of each tooth was cleaned, shaped, and Ca(OH)2 used as an interappointment medication. Cryopreserved allogeneic BM-MSCs were thawed, expanded, incorporated into preclotted platelet-rich plasma, and implanted into the tooth's pulp cavity. They were sealed with bioceramic cement and composite. Sensibility, apical foramen, calcium deposits within the root canal, and resolution of periapical lesions were evaluated in each tooth over the following 12 months.

RESULTS

Based on 9 variables established for dental pulp-like tissue regeneration, all MSC-treated teeth showed evidence of successful regeneration. Clinical and radiographic evaluation of the treated teeth showed periapical lesion healing, sensitivity to cold and electricity, decreased width of the apical foramen, and mineralization within the canal space.

CONCLUSIONS

Transplantation of allogeneic MSCs induces the formation of dental pulp-like tissue in permanent immature apex teeth with pulp necrosis and apical periodontitis. Implant of MSCs constitutes a potential therapy in regenerative endodontics in pediatric dentistry. Future studies incorporating a larger sample size may confirm these results.

Scrutinizing the effect of rGO-cuttlefish bone hydroxyapatite composite infused carrageenan membrane towards wound reconstruction

Carrageenan is an emerging biopolymer for wound healing and regenerative applications. In this study, reduced graphene oxide (rGO) and hydroxyapatite (HAp) nano-composites infused carrageenan bioactive membrane was fabricated. Here, hydroxyapatite was synthesized from cuttlefish bone (CF-HAp) and its properties were compared with that of chemically synthesized HAp. Crystalline Ca5(PO4)3(OH) and Ca3(PO4)2) phases were obtained in cuttlefish bone derived HAp. Reduced graphene oxide was synthesized and composites were prepared with chemical HAp and CF-HAp. FT-IR spectral analysis showed the imprints of hydroxyapatite on the membrane and also nano-structured particles were evident through morphological estimations that confirm the distribution of nano-particles on the carrageenan membrane. Nano-particulates infused carrageenan membrane showed the maximum tensile strength, in which graphene incorporated carrageenan bioactive membrane showed highest stability of 15.26 MPa. The contact angle of chemical HAp infused carrageenan membrane (CAR-HAp) showed more hydrophilic in nature (48.63° ± 7.47°) compared to control (61.77° ± 1.28°). Bio-compatibility features enunciate the optimal compatibility of fabricated bioactive membrane with fibroblast cell line; simultaneously, CAR-rGO-CF-HAp showed tremendous wound healing behavior with zebrafish model. Hence, fabricated bioactive membrane with the infusion of rGO- hydroxyapatite derived from cuttlefish bone was found to be a versatile biopolymer membrane for wound healing application.

Applications of selected polysaccharides and proteins in dentistry: A review

In the last ten years, remarkable characteristics and a variety of functionalities have been created in biopolymeric materials for clinical dental applications. This review gives an overview of current knowledge of natural biopolymers (biological macromolecules) in terms of structural, functional, and property interactions. Natural biopolymers such as polysaccharides (chitosan, bacterial cellulose, hyaluronic acid, and alginate) and polypeptides (collagen and silk fibroin) have been discussed for dental uses. These biopolymers exhibit excellent properties alone and when employed with other composite molecules making them ideal for treatment of periodontitis, endodontics, dental pulp regeneration and oral wound healing. These biopolymers together with the composite materials exhibit better biocompatibility, inertness, elasticity and flexibility which makes them a leading candidate to be used for other dental applications like caries management, oral appliances, dentures, dental implants and oral surgeries.

Electrospun nanofibers applications in caries lesions: prevention, treatment and regeneration

Dental caries is a multifactorial disease primarily mediated by biofilm formation, resulting in a net loss of mineral content and degradation of organic matrix in dental hard tissues. Caries lesions of varying depths can result in demineralization of the superficial enamel, the formation of deep cavities extending into the dentin, and even pulp infection. Electrospun nanofibers (ESNs) exhibit an expansive specific surface area and a porous structure, closely mimicking the unique architecture of the natural extracellular matrix (ECM). This unique topography caters to the transport of small molecules and facilitates localized therapeutic drug delivery, offering great potential in regulating cell behavior, and thereby attracting interest in ESNs' applications in the treatment of caries lesions and the reconditioning of the affected dental tissues. Thus, this review aims to consolidate the recent developments in ESNs' applications for caries lesions. This review begins with an introduction to the electrospinning technique and provides a comprehensive overview of the biological properties and modification methods of ESNs, followed by an introduction outlining the basic pathological processes, classification and treatment requirements of caries lesions. Finally, the review offers a detailed examination of the research progress on the ESNs' application in caries lesions and concludes by addressing the limitations.

Three-dimensional eco-friendly bacterial nanocellulose (BNC) scaffold for regenerative dentistry: Characterization, cytocompatibility and differentiation potential

OBJECTIVE

Regenerative dentistry (RD) is an innovative strategy for treating necrotic teeth and regenerating damaged dental tissue. Biocompatible materials are pivotal for the advancement of RD, and the rising interest in environmental sustainability drives exploration of sustainable materials for dentistry. Bacterial nanocellulose (BNC) has emerged as a promising eco-friendly option and this study aims to assess BNC's suitability as scaffolds for regenerative dentistry applications.

METHODS

Different in vitro methods have been utilized to characterize the properties of BNC scaffolds in regenerative dentistry, such as scanning electron microscopy (SEM) to analyse surface property and porosity, as well as examining their absorption behaviour using phosphate-buffered saline and bovine serum. Dental pulp stem cell (DPSCs) attachment, viability, and proliferation were evaluated using SEM, live and dead, and tetrazolium reduction assays. The odontogenic potential of the scaffold was evaluated using Alizarin Red staining and qPCR (14 and 21 days).

RESULTS

Scanning electron microscopy (SEM) images and ethanol displacement method demonstrated the porous architecture of the BNC scaffold with an average porosity of 70.02 ± 4.74% and 50.26 ± 1.43% respectively. The scaffold absorbed 2846.54 ± 258.95 of BSA and 1648.63 ± 50.37% PBS after immersion in solution for 1 h, following pseudo first and second order kinetics. The biocompatibility assay indicated that cell density increased with time and that the scaffold was appropriate for cell adhesion and migration. Moreover, the BNC led to significantly higher mineralization and odontogenic expression compared to the control (BNC in conditioned media).

SIGNIFICANCE

BNC showed fast adsorption of bovine serum, allowed DPSC attachment, migration, and odontogenic differentiation. This suggests its suitability as a biocompatible scaffold for triggering in situ mineralized tissue regeneration for regenerative dental applications.

Macro, Micro, and Nano-Inspired Bioactive Polymeric Biomaterials in Therapeutic, and Regenerative Orofacial Applications

Introducing dental polymers has accelerated biotechnological research, advancing tissue engineering, biomaterials development, and drug delivery. Polymers have been utilized effectively in dentistry to build dentures and orthodontic equipment and are key components in the composition of numerous restorative materials. Furthermore, dental polymers have the potential to be employed for medication administration and tissue regeneration. To analyze the influence of polymer-based investigations on practical medical trials, it is required to evaluate the research undertaken in this sector. The present review aims to gather evidence on polymer applications in dental, oral, and maxillofacial reconstruction.

Growth Factors Released from Advanced Platelet-Rich Fibrin in the Presence of Calcium-Based Silicate Materials and Their Impact on the Viability and Migration of Stem Cells of Apical Papilla

Advanced platelet-rich fibrin (A-PRF) provides the scaffold and growth factors necessary for stem cells to proliferate and differentiate in successful regenerative endodontic procedures. This study investigates the release of transforming growth factor-β1 (TGF-β1), platelet-derived growth factor (PDGF), and vascular endothelial growth factor (VEGF) from A-PRF in cell culture media in the presence and absence of mineral trioxide aggregate (MTA) or Biodentine. Additionally, this research assesses the viability and migration of stem cells of the apical papilla (SCAP) in previously conditioned media. A-PRF obtained from 14 participants were incubated for 7 days in cell culture media alone or via layering with MTA or Biodentine discs and the release of selected growth factors in the media was evaluated using ELISA. The viability of SCAP grown in conditioned media was measured using the CCK8 assay, while SCAP migration was assessed via a transwell assay by counting migrated cells. The release of TGF-β1, PDGF, and VEGF was significantly higher in media with A-PRF alone than in the presence of either calcium-based silicate material (p < 0.05), which showed no difference from the no-A-PRF control (p < 0.05). None of the tested growth factors released in the A-PRF-conditioned media correlated with clot weight. A-PRF-conditioned media, both with and without calcium-based silicate materials, did not impact SCAP viability and migration (p > 0.05). This study shows that SCAP behavior is not impacted by the decrease in growth factor released in the presence of calcium-based silicate materials and that their role in REPs warrants further investigation.

Biopolymers and Their Application in Bioprinting Processes for Dental Tissue Engineering

Dental tissues are composed of multiple tissues with complex organization, such as dentin, gingiva, periodontal ligament, and alveolar bone. These tissues have different mechanical and biological properties that are essential for their functions. Therefore, dental diseases and injuries pose significant challenges for restorative dentistry, as they require innovative strategies to regenerate damaged or missing dental tissues. Biomimetic bioconstructs that can effectively integrate with native tissues and restore their functionalities are desirable for dental tissue regeneration. However, fabricating such bioconstructs is challenging due to the diversity and complexity of dental tissues. This review provides a comprehensive overview of the recent developments in polymer-based tissue engineering and three-dimensional (3D) printing technologies for dental tissue regeneration. It also discusses the current state-of-the-art, focusing on key techniques, such as polymeric biomaterials and 3D printing with or without cells, used in tissue engineering for dental tissues. Moreover, the final section of this paper identifies the challenges and future directions of this promising research field.

Semaphorin 4D Induces Vasculogenic Differentiation of Dental Pulp Stem Cells

This work aimed to evaluate the effect of Semaphorin 4D (SEMA4D) signaling through Plexin B1 on the vasculogenic differentiation of dental pulp stem cells. We assessed the protein expression of SEMA4D and Plexin B1 in dental pulp stem cells (DPSC) from permanent human teeth and stem cells from human exfoliated deciduous (SHED) teeth using Western blots. Their expression in human dental pulp tissues and DPSC-engineered dental pulps was determined using immunofluorescence. We then exposed dental pulp stem cells to recombinant human SEMA4D (rhSEMA4D), evaluated the expression of endothelial cell differentiation markers, and assessed the vasculogenic potential of rhSEMA4D using an in vitro sprouting assay. Lastly, Plexin B1 was silenced to ascertain its role in SEMA4D-mediated vasculogenic differentiation. We found that SEMA4D and Plexin B1 are expressed in DPSC, SHED, and human dental pulp tissues. rhSEMA4D (25-100 ng/mL) induced the expression of endothelial markers, i.e., vascular endothelial growth factor receptor (VEGFR)-2, cluster of differentiation (CD)-31, and tyrosine kinase with immunoglobulin-like and EGF-like domains (Tie)-2, in dental pulp stem cells and promoted capillary-like sprouting in vitro (p < 0.05). Furthermore, Plexin B1 silencing abrogated the vasculogenic differentiation of dental pulp stem cells and significantly inhibited capillary sprouting upon exposure to rhSEMA4D. Collectively, these data provide evidence that SEMA4D induces vasculogenic differentiation of dental pulp stem cells through Plexin B1 signaling.

Biofabrication of engineered dento-alveolar tissue

Oral health is essential for a good overall health. Dento-alveolar conditions have a high prevalence, ranging from tooth decay periodontitis to alveolar bone resorption. However, oral tissues exhibit a limited regenerative capacity, and full recovery is challenging. Therefore, regenerative therapies for dento-alveolar tissue (e.g., alveolar bone, periodontal membrane, dentin-pulp complex) have gained much attention, and novel approaches have been proposed in recent decades. This review focuses on the cells, biomaterials and the biofabrication methods used to develop therapies for tooth root bioengineering. Examples of the techniques covered are the multitude of additive manufacturing techniques and bioprinting approaches used to create scaffolds or tissue constructs. Furthermore, biomaterials and stem cells utilized during biofabrication will also be described for different target tissues. As these new therapies gradually become a reality in the lab, the translation to the clinic is still minute, with a further need to overcome multiple challenges and broaden the clinical application of these alternatives.

Effect of Intracoronal Sealing Biomaterials on the Histological Outcome of Endodontic Revitalisation in Immature Sheep Teeth-A Pilot Study

The influence of intracoronal sealing biomaterials on the newly formed regenerative tissue after endodontic revitalisation therapy remains unexplored. The objective of this study was to compare the gene expression profiles of two different tricalcium silicate-based biomaterials alongside the histological outcomes of endodontic revitalisation therapy in immature sheep teeth. The messenger RNA expression of TGF-β, BMP2, BGLAP, VEGFA, WNT5A, MMP1, TNF-α and SMAD6 was evaluated after 1 day with qRT-PCR. For evaluation of histological outcomes, revitalisation therapy was performed using Biodentine (n = 4) or ProRoot white mineral trioxide aggregate (WMTA) (n = 4) in immature sheep according to the European Society of Endodontology position statement. After 6 months' follow-up, one tooth in the Biodentine group was lost to avulsion. Histologically, extent of inflammation, presence or absence of tissue with cellularity and vascularity inside the pulp space, area of tissue with cellularity and vascularity, length of odontoblast lining attached to the dentinal wall, number and area of blood vessels and area of empty root canal space were measured by two independent investigators. All continuous data were subjected to statistical analysis using Wilcoxon matched-pairs signed rank test at a significance level of p < 0.05. Biodentine and ProRoot WMTA upregulated the genes responsible for odontoblast differentiation, mineralisation and angiogenesis. Biodentine induced the formation of a significantly larger area of neoformed tissue with cellularity, vascularity and increased length of odontoblast lining attached to the dentinal walls compared to ProRoot WMTA (p < 0.05), but future studies with larger sample size and adequate power as estimated by the results of this pilot study would confirm the effect of intracoronal sealing biomaterials on the histological outcome of endodontic revitalisation.

Microfabrication approaches for oral research and clinical dentistry

Currently, there is a variety of laboratory tools and strategies that have been developed to investigate in-vivo processes using in-vitro models. Amongst these, microfabrication represents a disruptive technology that is currently enabling next-generation biomedical research through the development of complex laboratory approaches (e.g., microfluidics), engineering of micrometer scale sensors and actuators (micropillars for traction force microscopy), and the creation of environments mimicking cell, tissue, and organ-specific contexts. Although microfabrication has been around for some time, its application in dental and oral research is still incipient. Nevertheless, in recent years multiple lines of research have emerged that use microfabrication-based approaches for the study of oral diseases and conditions with micro- and nano-scale sensitivities. Furthermore, many investigations are aiming to develop clinically relevant microfabrication-based applications for diagnostics, screening, and oral biomaterial manufacturing. Therefore, the objective of this review is to summarize the current application of microfabrication techniques in oral sciences, both in research and clinics, and to discuss possible future applications of these technologies for in-vitro studies and practical patient care. Initially, this review provides an overview of the most employed microfabrication methods utilized in biomedicine and dentistry. Subsequently, the use of micro- and nano-fabrication approaches in relevant fields of dental research such as endodontic and periodontal regeneration, biomaterials research, dental implantology, oral pathology, and biofilms was discussed. Finally, the current and future uses of microfabrication technology for clinical dentistry and how these approaches may soon be widely available in clinics for the diagnosis, prevention, and treatment of relevant pathologies are presented.

Characterization of a bioscaffold containing polysaccharide acemannan and native collagen for pulp tissue regeneration

Dental pulp regeneration exploits tissue engineering concepts using stem cells/scaffolds/growth-factors. Extracted collagen is commonly used as a biomaterial-scaffold due to its biocompatibility/biodegradability and mimics the natural extracellular matrix. Adding biomolecules into a collagen-scaffold enhanced pulp regeneration. Acemannan, β-(1-4)-acetylated-polymannose, is a polysaccharide extracted from aloe vera. Acemannan is a regenerative biomaterial. Therefore, acemannan could be a biomolecule in a collagen-scaffold. Here, acemannan and native collagen were obtained and characterized. The AceCol-scaffold's physical properties were investigated using FTIR, SEM, contact angle, swelling, pore size, porosity, compressive modulus, and degradation assays. The AceCol-scaffold's biocompatibility, growth factor secretion, osteogenic protein expression, and calcification were evaluated in vitro. The AceCol-scaffolds demonstrated higher hydrophilicity, swelling, porosity, and larger pore size than the collagen scaffolds (p < 0.05). Better cell-cell and cell-scaffold adhesion, and dentin extracellular matrix protein (BSP/OPN/DSPP) expression were observed in the AceCol-scaffold, however, DSPP expression was not detected in the collagen group. Significantly increased cellular proliferation, VEGF and BMP2 expression, and mineralization were detected in the AceCol-scaffold compared with the collagen-scaffold (p < 0.05). Computer simulation revealed that acemannan's 3D structure changes to bind with collagen. In conclusion, the AceCol-scaffold synergistically provides better physical and biological properties than collagen. The AceCol-scaffold is a promising material for tissue regeneration.

Natural monoterpenes-laden electrospun fibrous scaffolds for endodontic infection eradication

This investigation aimed to synthesize poly(D,L-lactide) (PLA)-based fibrous scaffolds containing natural essential oils (i.e., linalool and citral) and determine their antimicrobial properties and cytocompatibility as a clinically viable cell-friendly disinfection strategy for regenerative endodontics. PLA-based fibrous scaffolds were fabricated via electrospinning with different concentrations of linalool and citral. The micromorphology and average diameter of the fibers was investigated through scanning electron microscopy (SEM). The chemical composition of the scaffolds was inferred by Fourier-transform infrared spectroscopy (FTIR). Antimicrobial efficacy against Enterococcus faecalis and Actinomyces naeslundii was also evaluated by agar diffusion and colony-forming units (CFU) assays. The scaffolds' cytocompatibility was determined using dental pulp stem cells (DPSCs). Statistical analyses were performed and the significance level was set at α = 5%. Linalool and citral's incorporation in the PLA fibrous scaffolds was confirmed in the FTIR spectra. SEM images indicate no morphological changes upon inclusion of the essential oils, except the reduced diameter of 40% linalool-laden fibers (p < 0.05). Importantly, significant antimicrobial properties were reported for citral-containing scaffolds for CFU/mL counts (p < 0.05), while only 20% and 40% linalool-laden scaffolds reduced CFU/mL (p < 0.05). Meanwhile, the inhibition halos were verified in a concentration-dependent manner for all monoterpenes-laden scaffolds. Citral- and linalool-laden PLA-based fibrous scaffolds showed acceptable cytocompatibility. The incorporation of natural monoterpenes did not alter the scaffolds' fibrous morphology, promoted antimicrobial action against endodontic pathogens, and preserved DPSCs viability. Linalool- and citral-laden electrospun scaffolds hold promise as naturally derived antimicrobial therapeutics for applications in regenerative endodontics.

Decellularized rat submandibular gland as an alternative scaffold for dental pulp regeneration

Introduction: Decellularized extracellular matrix has been recognized as an optimal scaffold for dental pulp regeneration. However, the limited amount of native dental pulp tissue restricts its clinical applications. The submandibular gland shares some basic extracellular matrix components and characteristics with dental pulp. However, whether decellularized submandibular gland extracellular matrix (DSMG) can be used as an alternative scaffold for dental pulp regenerative medicine is unclear. Methods: Thus, we successfully decellularized the whole rat submandibular gland and human dental pulp, and then conducted in vitro and in vivo studies to compare the properties of these two scaffolds for dental pulp regeneration. Results: Our results showed that extracellular matrix of the submandibular gland had great similarities in structure and composition with that of dental pulp. Furthermore, it was confirmed that the DSMG could support adhesion and proliferation of dental pulp stem cells in vitro. In vivo findings revealed that implanted cell-seeded DSMG formed a vascularized dental pulp-like tissue and expressed markers involved in dentinogenesis and angiogenesis. Discussion: In summary, we introduced a novel accessible biological scaffold and validated its effectiveness as an extracellular matrix-based tissue engineering scaffold for dental pulp regenerative therapy.

Stage-specific requirement for METTL3-dependent m6A modification during dental pulp stem cell differentiation

BACKGROUND

N⁶-methyladenosine (m⁶A) is the most prevalent epigenetic modification in eukaryotic messenger RNAs and plays a critical role in cell fate transition. However, it remains to be elucidated how m⁶A marks functionally impact the transcriptional cascades that orchestrate stem cell differentiation. The present study focuses on the biological function and mechanism of m⁶A methylation in dental pulp stem cell (DPSC) differentiation.

METHODS

m⁶A RNA immunoprecipitation sequencing was utilized to assess the m⁶A-mRNA landscape during DPSC differentiation. Ectopic transplantation of DPSCs in immunodeficient mice was conducted to verify the in vitro findings. RNA sequencing and m⁶A RNA immunoprecipitation sequencing were combined to identify the candidate targets. RNA immunoprecipitation and RNA/protein stability of Noggin (NOG) were evaluated. The alteration in poly(A) tail was measured by 3'-RACE and poly(A) tail length assays.

RESULTS

We characterized a dynamic m⁶A-mRNA landscape during DPSC mineralization with increasing enrichment in the 3' untranslated region (UTR). Methyltransferase-like 3 (METTL3) was identified as the key m⁶A player, and METTL3 knockdown disrupted functional DPSC differentiation. Moreover, METTL3 overexpression enhanced DPSC mineralization. Increasing m⁶A deposition in the 3' UTR restricted NOG expression, which is required for DPSC mineralization. This stage-specific m⁶A methylation and destabilization of NOG was suppressed by METTL3 knockdown only in differentiated DPSCs. Furthermore, METTL3 promotes the degradation of m⁶A-tagged NOG by shortening the poly(A) tail length in the differentiated stage.

CONCLUSIONS

Our results address an essential role of dynamic m⁶A signaling in the temporal control of DPSC differentiation and provide new insight into epitranscriptomic mechanisms in stem cell-based therapy.

Nanofibrous scaffolds for regenerative endodontics treatment

Untreated dental caries, tooth trauma and dental anatomical variations such as dens invaginatus can result in pulpitis. However, standard root canal therapy cannot treat immature permanent teeth due to an open apical foramen and thin dentinal walls. Thus, regenerative endodontics treatment (RET) following a disinfection step with pulp regeneration has been developed. Pulp connective-tissue, dentin formation, revascularization and reinnervation can occur in this procedure which should be supplemented with intelligent biomaterials to improve repeatability and support well-coordinated regeneration. Furthermore, nanofibrous scaffolds, as one of the most commonly used materials, show promise. The purpose of this article is to highlight the advantages of nanofibrous scaffolds and discuss the future modification and application of them.

Biomimetic Approaches in Clinical Endodontics

In the last few decades, biomimetic concepts have been widely adopted in various biomedical fields, including clinical dentistry. Endodontics is an important sub-branch of dentistry which deals with the different conditions of pulp to prevent tooth loss. Traditionally, common procedures, namely pulp capping, root canal treatment, apexification, and apexigonesis, have been considered for the treatment of different pulp conditions using selected materials. However, clinically to regenerate dental pulp, tissue engineering has been advocated as a feasible approach. Currently, new trends are emerging in terms of regenerative endodontics which have led to the replacement of diseased and non-vital teeth into the functional and healthy dentine-pulp complex. Root- canal therapy is the standard management option when dental pulp is damaged irreversibly. This treatment modality involves soft-tissue removal and then filling that gap through the obturation technique with a synthetic material. The formation of tubular dentine and pulp-like tissue formation occurs when stem cells are transplanted into the root canal with an appropriate scaffold material. To sum up tissue engineering approach includes three components: (1) scaffold, (2) differentiation, growth, and factors, and (3) the recruitment of stem cells within the pulp or from the periapical region. The aim of this paper is to thoroughly review and discuss various pulp-regenerative approaches and materials used in regenerative endodontics which may highlight the current trends and future research prospects in this particular area.

Tissue Engineering with Stem Cell from Human Exfoliated Deciduous Teeth (SHED) and Collagen Matrix, Regulated by Growth Factor in Regenerating the Dental Pulp

Maintaining dental pulp vitality and preventing tooth loss are two challenges in endodontic treatment. A tooth lacking a viable pulp loses its defense mechanism and regenerative ability, making it more vulnerable to severe damage and eventually necessitating extraction. The tissue engineering approach has drawn attention as an alternative therapy as it can regenerate dentin-pulp complex structures and functions. Stem cells or progenitor cells, extracellular matrix, and signaling molecules are triad components of this approach. Stem cells from human exfoliated deciduous teeth (SHED) are a promising, noninvasive source of stem cells for tissue regeneration. Not only can SHEDs regenerate dentin-pulp tissues (comprised of fibroblasts, odontoblasts, endothelial cells, and nerve cells), but SHEDs also possess immunomodulatory and immunosuppressive properties. The collagen matrix is a material of choice to provide structural and microenvironmental support for SHED-to-dentin pulp tissue differentiation. Growth factors regulate cell proliferation, migration, and differentiation into specific phenotypes via signal-transduction pathways. This review provides current concepts and applications of the tissue engineering approach, especially SHEDs, in endodontic treatment.

Photocrosslinkable methacrylated gelatin hydrogel as a cell-friendly injectable delivery system for chlorhexidine in regenerative endodontics

OBJECTIVES

This work sought to formulate photocrosslinkable chlorhexidine (CHX)-laden methacrylated gelatin (CHX/GelMA) hydrogels with broad spectrum of action against endodontic pathogens as a clinically viable cell-friendly disinfection therapy prior to regenerative endodontics procedures.

METHODS

CHX/GelMA hydrogel formulations were successfully synthesized using CHX concentrations between 0.12 % and 5 % w/v. Hydrogel microstructure was evaluated by scanning electron microscopy (SEM). Swelling and enzymatic degradation were assessed to determine microenvironmental effects. Compression test was performed to investigate the influence of CHX incorporation on the hydrogels' biomechanics. The antimicrobial and anti-biofilm potential of the formulated hydrogels were assessed using agar diffusion assays and a microcosms biofilm model, respectively. The cytocompatibility was evaluated by exposing stem cells from human exfoliated deciduous teeth (SHEDs) to hydrogel extracts (i.e., leachable byproducts obtained from overtime hydrogel incubation in phosphate buffer saline). The data were analyzed using One- and Two-way ANOVA and Tukey's test (α = 0.05).

RESULTS

CHX/GelMA hydrogels were effectively prepared. NMR spectroscopy confirmed the incorporation of CHX into GelMA. The addition of CHX did not change the micromorphology (pore size) nor the swelling profile (p > 0.05). CHX incorporation reduced the degradation rate of the hydrogels (p < 0.001); whereas, it contributed to increased compressive modulus (p < 0.05). Regarding the antimicrobial properties, the incorporation of CHX showed a statistically significant decrease in the number of bacteria colonies at 0.12 % and 0.5 % concentration (p < 0.001) and completely inhibited the growth of biofilm at concentration levels 1 %, 2 %, and 5 %. Meanwhile, the addition of CHX, regardless of the concentration, did not lead to cell toxicity, as cell viability values were above 70 %.

SIGNIFICANCE

The addition of CHX into GelMA showed significant antimicrobial action against the pathogens tested, even at low concentrations, with the potential to be used as a cell-friendly injectable drug delivery system for root canal disinfection prior to regenerative endodontics.

Advances in Scaffolds Used for Pulp-Dentine Complex Tissue Engineering - A Narrative Review

Pulp necrosis in immature teeth disrupts root development and predisposes roots to fracture as a consequence of their thin walls and open apices. Regenerative endodontics is a developing treatment modality whereby necrotic pulps are replaced with newly formed healthy tissue inside the root canal. Many clinical studies have demonstrated the potential of this strategy to stimulate root maturation and apical root-end closure. However, clinical outcomes are patient-dependent and unpredictable. The development of predictable clinical protocols is achieved through the interplay of the three classical elements of tissue engineering, namely, stem cells, signaling molecules, and scaffolds. Scaffolds provide structural support for cells to adhere and proliferate and also regulate cell differentiation and metabolism. Hence, designing and fabricating an appropriate scaffold is a crucial step in tissue engineering. In this review, four main classes of scaffolds used to engineer pulp-dentine complexes, including bioceramic-based scaffolds, synthetic polymer-based scaffolds, natural polymer-based scaffolds, and composite scaffolds, are covered. Additionally, recent advances in the design, fabrication, and application of such scaffolds are analysed along with their advantages and limitations. Finally, the importance of vascular network establishment in the success of pulp-dentine complex regeneration and strategies used to create scaffolds to address this challenge are discussed.

Self-assembly peptide P11-4 induces mineralization and cell-migration of odontoblast-like cells

OBJECTIVES

Self-assembling peptide P11-4 is amphiphilic and pH-triggered, effective on repairing early enamel carious lesions and dentin remineralization. However, P11-4 effects on dentin biomineralization and repair ability remain unexplored. Thus, cytocompatibility and effectiveness of P11-4 on inducing mineralization and migration of odontoblast-like cells (MDPC-23) were investigated.

METHODS

MDPC-23 were seeded in contact with P11-4 (0.5 and 1 µg/ml), Dentin Matrix Protein 1 (DMP1 0.5 and 1 µg/ml) or Calcium hydroxide (Ca(OH)2 100 µg/ml) solutions. Cell viability was verified using MTT (n = 6/group). Mineral deposition was tested using Alizarin Red (n = 4/group). Cell migration was assessed by light microscopy (n = 2/group). MTT and Alizarin Red data were compared using Kruskal-Wallis and Mann-Whitney (α=0.01).

RESULTS

P11-4 (0.5 and 1 µg/ml) and DMP1 (0.5 and 1 µg/ml) resulted the highest cell viability; Ca(OH)2 presented the lowest. 1 µg/ml DMP1 and 1 µg/ml P11-4 promoted the highest mineral deposition. Ca(OH)2 presented lower values of mineral deposits than DMP1 1 µg/ml (p < 0.01), but similar to P11-4 1 µg/ml. P11-4 and DMP1 at 0.5 µg/ml induced lesser mineral precipitation than P11-4 and DMP1 at 1 µg/ml (p < 0.01), with no difference to Ca(OH)2. All materials stimulated cell migration, however, lower concentrations of DMP1 and P11-4 demonstrated a higher migration potential.

CONCLUSION

P11-4 did not affect cell viability, induces mineral deposition and MDPC-23 migration like DMP1.

CLINICAL SIGNIFICANCE

Self-assembling peptide P11-4 does not affect the cell viability and induces mineral deposition comparable to native protein involved in biomineralization. Combined with its ability to bind type I collagen, P11-4 is a promising bioinspired molecule that provides native-tissue conditions and foster further studies on its ability to form dentin bridges in pulp-capping strategies.

Gelatin methacryloyl-alginate core-shell microcapsules as efficient delivery platforms for prevascularized microtissues in endodontic regeneration

Combined injectable cell-laden microspheres and angiogenesis approaches are promising for functional vascularized endodontic regeneration. However, advanced microsphere designs and production techniques that benefit practical applications are rarely developed. Herein, gelatin methacryloyl (GelMA)-alginate core-shell microcapsules were fabricated to co-encapsulate human dental pulp stem cells (hDPSCs) and human umbilical vein endothelial cells (HUVECs) based on a coaxial electrostatic microdroplet technique. This technique enables high-throughput production, convenient collection, and minimal material waste. The average diameter of core-shell microcapsules was ∼359 µm, and that of GelMA cores was ∼278 µm. There were higher proliferation rates for hDPSCs and HUVECs co-encapsulated in the GelMA cores than for hDPSCs or HUVECs monoculture group. HUVECs assembled to form 3D capillary-like networks in co-culture microcapsules. Moreover, HUVECs promoted the osteo/odontogenic differentiation of hDPSCs in microcapsules. After 14 days of cultivation, prevascularized microtissues formed in microcapsules that contained abundant deposited extracellular matrix (ECM); no microcapsule aggregation occurred. In vivo studies confirmed that better microvessel formation and pulp-like tissue regeneration occurred in the co-culture group than in hDPSCs group. Thus, an effective platform for prevascularization microtissue preparation was proposed and showed great promise in endodontic regeneration and tissue engineering applications. STATEMENT OF SIGNIFICANCE: Cell-laden microspheres combined with the proangiogenesis approach are promising in endodontic regeneration. We proposed GelMA-alginate core-shell microcapsules generated via the coaxial electrostatic microdroplet (CEM) method, which utilizes a double-lumen needle to allow for core-shell structures to form. The microcapsules were used for co-culturing hDPSCs and HUVECs to harvest large amounts of prevascularized microtissues, which further showed improved vascularization and pulp-like tissue regeneration in vivo. This CEM method and the microcapsule system have advantages of high-throughput generation, convenient collection, and avoid aggregation during long-term culturing. We proposed a high-effective platform for mass production of prevascularized microtissues, which exhibit great promise in the clinical transformation of endodontic regeneration and other applications in regenerative medicine.

Influence of ethylenediaminetetraacetic acid on regenerative endodontics: a systematic review

BACKGROUND

The effects of ethylenediaminetetraacetic acid (EDTA) on regenerative endodontic procedures (REPs) are controversial, because, despite releasing growth factors from dentine, some studies show negative effects on cell behaviour.

OBJECTIVES

To investigate the influence of the use of EDTA in REP on the growth factors' release, cell behaviour, and tissue regeneration.

METHODS

A systematic search was conducted (PubMed/Medline, Scopus, Cochrane Library, Web of Science, Embase, OpenGrey, and reference lists) up to February 2021. Only in vivo and in vitro studies evaluating the effects of EDTA on the biological factors of dentine, pulp/periapical tissues, and cell behaviour were eligible. Studies without a control group or available full text were excluded. The growth factors' release was the primary outcome. Risk of bias in the in vitro and in vivo studies was performed according to Joanna Briggs Institute's Checklist and SYRCLE's RoB tool, respectively.

RESULTS

Of the 1848 articles retrieved, 36 were selected. Among these, 32 were in vitro, three animal studies, and one with both models. The EDTA concentrations ranged from 3%-15%, at different times. Regarding growth factors' release (17 studies), 15 studies found significant transforming growth factor (TGF)-β release after dentine conditioning with EDTA, and most found no influence on vascular endothelial growth factor (VEGF) release. Regarding cell behaviour (26 studies), eight studies showed no influence of EDTA-treated dentine on cell viability; whereas, five, nine, and six studies showed higher cell migration, adhesion, and differentiation, respectively. No influence of EDTA conditioning was observed in animal studies. In vitro studies had a low risk of bias, whereas animal studies had high risk of bias. Meta-analysis was unfeasible.

DISCUSSION

This review found that EDTA increased TGF-β release and improved cell activity. However, well-designed histological analyses using immature teeth models are needed.

CONCLUSIONS

High quality in vitro evidence suggests that EDTA-treated dentine positively influences TGF-β release, cell migration, attachment, and differentiation; further research to evaluate its influence on tissue regeneration is necessary due to low methodological quality of the animal studies.

Quercetin loaded cosm-nutraceutical electrospun composite nanofibers for acne alleviation: Preparation, characterization and experimental clinical appraisal

In the cosmeceutical field, it is essential to develop topical delivery systems which would allow drugs to create a depot and permeate within the skin. The aim of the present study was to develop composite nanofibers of polyvinyl alcohol/quercetin/essential oils using the electrospinning technique, and assess their efficiency in acne alleviation. Quercetin was chosen due to its anti-inflammatory, anti-oxidant, and antibacterial activities. Nanofibers were characterized for their morphology, ex-vivo deposition/permeation, physical/mechanical integrity, thermal properties, and chemical characteristics. In addition, the anti-bacterial efficacy was tested on Propionibacterium acne (P. acne), and a cytotoxicity assay was carried out. Lastly, an experimental clinical trial was conducted on acne patients, where the percentage reduction of inflammatory, non-inflammatory and total acne lesions was taken as evaluation criterion. Results showed that quercetin was successfully loaded into the nanofibers which were homogenously dispersed. They showed a reasonable skin deposition percentage of 28.24% ± 0.012, a significantly higher antibacterial efficacy against Propionibacterium acne than quercetin alone, and were utterly safe on skin fibroblastic cells. Upon clinical examination on acne patients, the nanofibers showed 61.2%, 14.7%, and 52.9% reduction of inflammatory, comedonal, and total acne lesions respectively, suggesting a promising topical anti-acne delivery system.

Preparation, Physicochemical Assessment and the Antimicrobial Action of Hydroxyapatite-Gelatin/Curcumin Nanofibrous Composites as a Dental Biomaterial

In this study, we prepared and evaluated hydroxyapatite-gelatin/curcumin nanofibrous composites and determined their antimicrobial effects against Escherichia coli, Staphylococcus aureus, and Streptococcus mutans. Hydroxyapatite-gelatin/curcumin nanofibrous composites were prepared by the electrospinning method. The prepared nanocomposites were then subjected to physicochemical studies by the light scattering method for their particle size, Fourier transmission infrared spectroscopy (FTIR) to identify their functional groups, X-ray diffraction (XRD) to study their crystallinity, and scanning electron microscopy (SEM) to study their morphology. For the microbial evaluation of nanocomposites, the disk diffusion method was used against Streptococcus mutans, Staphylococcus aureus, and Escherichia coli. The results showed that the nanofibers were uniform in shape without any bead (structural defects). The release pattern of curcumin from the nanocomposite was a two-stage release, 60% of which was released in the first two days and the rest being slowly released until the 14th day. The results of the microbial evaluations showed that the nanocomposites had significant antimicrobial effects against all bacteria (p = 0.0086). It seems that these nanocomposites can be used in dental tissue engineering or as other dental materials. Also, according to the appropriate microbial results, these plant antimicrobials can be used instead of chemical antimicrobials, or along with them, to reduce bacterial resistance.

Comparing Antibiotic Pastes with Electrospun Nanofibers as Modern Drug Delivery Systems for Regenerative Endodontics

Nanomaterials have various features that make these types of materials able to be applied in different biomedical applications like, diagnosis, treatment, and drug delivery. Using such materials in endodontic filed both to face the challenges that occur during treatment processes and to make these materials have an antibacterial effect without showing any harm on the host cells. The approach of nanofibers loaded with various antibacterial drugs offers a potential treatment method to enhance the elimination procedure of intracanal biofilms. Clinically, many models of bacterial biofilms have been prepared under in vitro conditions for different aims. The process of drug delivery from polymeric nanofibers is based on the principle that the releasing ratio of drug molecules increases due to the increase in the surface area of the hosted structure. In our review, we discuss diverse approaches of loading/releasing drugs on/from nanofibers and we summarized many studies about electrospun nanofibers loaded various drugs applied in the endodontic field. Moreover, we argued both the advantages and the limitations of these modern endodontic treatment materials comparing them with the traditional ones.

Highly Structured 3D Electrospun Conical Scaffold: A Tool for Dental Pulp Regeneration

New procedures envisioned for dental pulp regeneration after pulpectomy include cell homing strategy. It involves host endogenous stem cell recruitment and activation. To meet this cell-free approach, we need to design a relevant scaffold to support cell migration from tissues surrounding the dental root canal. A composite membrane made of electrospun poly(lactic acid) nanofibers and electrosprayed polycaprolactone with tannic acid (TA) microparticles which mimics the architecture of the extracellular matrix was first fabricated. After rolling the membrane in the form of a 3D conical scaffold and subsequently coating it with gelatin, it can be directly inserted into the root canal. The porous morphology of the construct was characterized by SEM at different length scales. It was shown that TA was released from the 3D conical scaffold after 2 days in PBS at 37 °C. Biocompatibility studies were first assessed by seeding human dental pulp stem cells (DPSCs) on planar membranes coated or not coated with gelatin to compare the surfaces. After 24 h, the results highlighted that the gelatin-coating increased the membrane biocompatibility and cell viability. Similar DPSC morphology and proliferation on both membrane surfaces were observed. The culture of DPSCs on conical scaffolds showed cell colonization in the whole cone volume, proving that the architecture of the conical scaffold was suitable for cell migration.

Platelet lysate functionalized gelatin methacrylate microspheres for improving angiogenesis in endodontic regeneration

Rapid angiogenesis is one of the challenges in endodontic regeneration. Recently, tailored polymeric microsphere system that loaded pro-angiogenic growth factors (GFs) is promising in facilitating vascularization in dental pulp regeneration. In addition, the synergistic effect of multiple GFs is considered more beneficial, but combination usage of them is rather complex and costly. Herein, we aimed to incorporate human platelet lysate (PL), a natural-derived pool of multiple GFs, into gelatin methacrylate (GelMA) microsphere system (GP), which was further modified by Laponite (GPL), a nanoclay with efficient drug delivery ability. These hybrid microspheres were successfully fabricated by electrostatic microdroplet technique with suitable size range (180∼380 µm). After incorporation of the PL and Laponite with GelMA, the Young's modulus of the hybrid hydrogel increased up to about 3-fold and the swelling and degradation rate decreased simultaneously. The PL-derived GFs continued to release up to 28 days from both the GP and GPL microspheres, while the latter released relatively more slowly. What's more, the released GFs could effectively induce tubule formation of human umbilical endothelial cells (HUVECs) and also promote human dental pulp stem cells (hDPSCs) migration. Additionally, the PL component in the GelMA microspheres significantly improved the proliferation, spreading, and odontogenic differentiation of the encapsulated hDPSCs. As further verified by the subcutaneous implantation results, both of the GP and GPL groups enhanced microvascular formation and pulp-like tissue regeneration. This work demonstrated that PL-incorporating GelMA microsphere system was a promising functional vehicle for promoting vascularized endodontic regeneration. STATEMENT OF SIGNIFICANCE: Polymeric microsphere system loaded with pro-angiogenic growth factors (GFs) shows great promise for regeneration of vascularized dental pulp. Herein, we prepared a functional GelMA microsphere system incorporated with human platelet lysates (PL) and nanoclay Laponite by the electrostatic microdroplet method. The results demonstrated that the GelMA/PL/Laponite microspheres significantly improved the spreading, proliferation, and odontogenic differentiation of the encapsulated hDPSCs compared with pure GelMA microspheres. Moreover, they also enhanced microvascular formation and pulp-like tissue regeneration in vivo. This hybrid microsphere system has great potential to accelerate microvessel formation in regenerated dental pulp and other tissues.

Biological response to lyophilized demineralized dentin matrix implanted in the subcutaneous tissues of rats

Aim

Lyophilized demineralized dentin matrix (LDDM) consists of a type 1 collagen complex matrix containing growth factors and no mineral crystals. Although the efficacy of LDDM for bone grafting is well known, there is limited evidence on the biological response to human lyophilized DDM. Therefore, the aim of this study was to evaluate the biological response of subcutaneous tissues in rats to powdered LDDM, mineral trioxide aggregate (MTA), and Biodentine implanted using polyethylene tubes.

Methods

Forty Wistar rats were divided into four groups (n = 10 each) depending on the experimental time intervals and were placed in polyethylene tubes containing LDDM, MTA, biodentine, and one empty control. After 3, 7, 15, and 30 observation days, the animals were sacrificed and quantitative and qualitative analysis of the subcutaneous tissue samples was carried out. The intensity of the inflammatory response was scored from 0 (no response) to 3 (severe response), and the data were statistically analyzed using ANOVA and Bonferroni tests (p < 0.05).

Results

All groups exhibited moderate inflammation after 3 and 7 days of observation, with presence of inflammatory infiltrate predominantly consisting of macrophages and angioblastic proliferation being observed. After 15 observation days, the control group exhibited mild inflammation and a predominance of fibroblasts, and this differed significantly from the remaining cement groups that exhibited moderate inflammation. After 30 days of observation, all groups exhibited a mild inflammatory response, predominance of fibroblasts, and a greater amount of collagen fibers.

Conclusion

Within the limitations of this study, it can be concluded that LDDM exhibited an acceptable biological response similar to MTA and Biodentine in the subcutaneous tissues of rats.

Personalized and Defect-Specific Antibiotic-Laden Scaffolds for Periodontal Infection Ablation

Periodontitis compromises the integrity and function of tooth-supporting structures. Although therapeutic approaches have been offered, predictable regeneration of periodontal tissues remains intangible, particularly in anatomically complex defects. In this work, personalized and defect-specific antibiotic-laden polymeric scaffolds containing metronidazole (MET), tetracycline (TCH), or their combination (MET/TCH) were created via electrospinning. An initial screening of the synthesized fibers comprising chemo-morphological analyses, cytocompatibility assessment, and antimicrobial validation against periodontopathogens was accomplished to determine the cell-friendly and anti-infective nature of the scaffolds. According to the cytocompatibility and antimicrobial data, the 1:3 MET/TCH formulation was used to obtain three-dimensional defect-specific scaffolds to treat periodontally compromised three-wall osseous defects in rats. Inflammatory cell response and new bone formation were assessed by histology. Micro-computerized tomography was performed to assess bone loss in the furcation area at 2 and 6 weeks post implantation. Chemo-morphological and cell compatibility analyses confirmed the synthesis of cytocompatible antibiotic-laden fibers with antimicrobial action. Importantly, the 1:3 MET/TCH defect-specific scaffolds led to increased new bone formation, lower bone loss, and reduced inflammatory response when compared to antibiotic-free scaffolds. Altogether, our results suggest that the fabrication of defect-specific antibiotic-laden scaffolds holds great potential toward the development of personalized (i.e., patient-specific medication) scaffolds to ablate infection while affording regenerative properties.

Should local drug delivery systems be used in dentistry?

In dentistry, the use of biomaterial-based drug delivery systems (DDS) aiming the release of the active compounds directly to the site of action is slowly getting more awareness among the scientific and medical community. Emerging technologies including nanotechnological platforms are offering novel approaches, but the majority are still in the proof-of-concept stage. This study critically reviews the potential use of DDS in anesthesiology, oral diseases, cariology, restorative dentistry, periodontics, endodontics, implantology, fixed and removable prosthodontics, and orthodontics with a special focus on infections. It also stresses the gaps and challenges faced. Despite numerous clinical and pharmacological advantages, some disadvantages of DDS pose an obstacle to their widespread use. The biomaterial's biofunctionality may be affected when the drug is incorporated and may cause an additional risk of toxicity. Also, the release of sub-therapeutic levels of drugs such as antibiotics may lead to microbial resistance. Multiple available techniques for the manufacture of DDS may affect drug release profiles and their bioavailability. If the benefits outweigh the costs, DDS may be potentially used to prevent or treat oral pathologies as an alternative to conventional strategies. A case-by-case approach must be followed.

Bioactivity effects of extracellular matrix proteins on apical papilla cells

Potent signaling agents stimulate and guide pulp tissue regeneration, especially in endodontic treatment of teeth with incomplete root formation.

In Vivo Evaluation of Decellularized Human Tooth Scaffold for Dental Tissue Regeneration

Conventional root canal treatment may result in loss of tooth vitality, which can lead to unfavorable treatment outcomes. Notably, a ceased tooth development of immature permanent teeth with open apices, regeneration of periodontal ligaments (PDL), and pulp is highly expected healing process. For regeneration, the scaffold is one of the critical components that carry biological benefits. Therefore, this study evaluated a decellularized human tooth as a scaffold for the PDL and pulp tissue regeneration. A tooth scaffold was fabricated using an effective decellularization method as reported in previous studies. PDL stem cells (PDLSCs) and dental pulp stem cells (DPSCs) obtained from human permanent teeth were inoculated onto decellularized scaffolds, then cultured to transplant into immunosuppressed mouse. After 9 weeks, PDLSCs and DPSCs that were inoculated onto decellularized tooth scaffolds and cultured in an in vivo demonstrated successful differentiation. In PDLSCs, a regeneration of the cementum/PDL complex could be expected. In DPSCs, the expression of genes related to revascularization and the hard tissue regeneration showed the possibility of pulp regeneration. This study suggested that the potential possible application of decellularized human tooth could be a scaffold in regeneration PDL and pulp tissue along with PDLSCs and DPSCs, respectively, as a novel treatment method.

Prognosis of Regenerative Endodontic Procedures in Mature Teeth: A Systematic Review and Meta-Analysis of Clinical and Radiographic Parameters

This work aimed to investigate the use of Regenerative Endodontic Procedures (REP) on the treatment of pulp necrosis in mature teeth through systematic review and meta-analysis of evidence on clinical and radiographic parameters before and after REP. A search was performed in different databases on 9 September 2020, including seven clinical studies and randomized controlled trials (RCT). The methodological quality was assessed using Revised Cochrane risk-of-bias (RoB 2) and Before-and-After tools. Meta-analyses were performed to evaluate the success incidences regarding the reduction of periapical lesion and recovery of sensitivity. The certainty of the evidence was assessed using GRADE. Meta-analysis showed a high overall success of 0.95 (0.92, 0.98) I² = 6%, with high periapical lesion reduction at 12 months (0.93 (0.86, 0.96) I² = 37%) and by the end of follow-up (0.91 (0.83, 0.96) I² = 13%). Lower incidences of positive sensitivity response were identified for the electrical (0.58 (0.46, 0.70) I² = 51%) and cold tests (0.70 (0.54, 0.84) I² = 68%). The calculated levels of REP success were similar to those reported for immature teeth. With a very low certainty of evidence, the meta-analysis showed a high incidence of REP’s success for mature teeth with necrotic pulp evidenced by periapical lesion reduction and moderate positive responses to sensitivity tests.

Platform technologies for regenerative endodontics from multifunctional biomaterials to tooth-on-a-chip strategies

OBJECTIVES

The aim of this review is to highlight recent progress in the field of biomaterials-mediated dental pulp tissue engineering. Specifically, we aim to underscore the critical design criteria of biomaterial platforms that are advantageous for pulp tissue engineering, discuss models for preclinical evaluation, and present new and innovative multifunctional strategies that hold promise for clinical translation.

MATERIALS AND METHODS

The current article is a comprehensive overview of recent progress over the last 5 years. In detail, we surveyed the literature in regenerative pulp biology, including novel biologic and biomaterials approaches, and those that combined multiple strategies, towards more clinically relevant models. PubMed searches were performed using the keywords: "regenerative dentistry," "dental pulp regeneration," "regenerative endodontics," and "dental pulp therapy."

RESULTS

Significant contributions to the field of regenerative dentistry have been made in the last 5 years, as evidenced by a significant body of publications. We chose exemplary studies that we believe are progressive towards clinically translatable solutions. We close this review with an outlook towards the future of pulp regeneration strategies and their clinical translation.

CONCLUSIONS

Current clinical treatments lack functional and predictable pulp regeneration and are more focused on the treatment of the consequences of pulp exposure, rather than the restoration of healthy dental pulp.

CLINICAL RELEVANCE

Clinically, there is great demand for bioinspired biomaterial strategies that are safe, efficacious, and easy to use, and clinicians are eager for their clinical translation. In particular, we place emphasis on strategies that combine favorable angiogenesis, mineralization, and functional tissue formation, while limiting immune reaction, risk of microbial infection, and pulp necrosis.

The effect of different irrigation solutions and activation techniques on the expression of growth factors from dentine of extracted premolar teeth

AIM

To evaluate in a laboratory study, the effect of different canal irrigant solutions and activation techniques on transforming growth factor (TGF-β1), insulin growth factor-1 (IGF-1), bone morphogenetic protein-7 (BMP-7) and vascular endothelial growth factor-A (VEGF-A) release levels from the dentine of extracted premolar teeth.

METHODOLOGY

Seventy premolar teeth with single root and canal were used. The lengths of the root segments were standardized to 12 mm, and the root canals were prepared up to size 100 with hand files. All surfaces of the teeth were covered with nail polish except the inner root canal surface. The root canals were irrigated with 1.5% NaOCl. Ten teeth were allocated to the control group. The remaining sixty teeth were divided into 2 main groups according to the chelating agent used (17% EDTA, 10% Citric acid; CA) and 3 subgroups (n = 10) according to irrigation activation technique (conventional syringe irrigation (CSI), passive ultrasonic irrigation (PUI) and Er:YAG laser activation). After the activation procedure, the root segments were placed into eppendorf tubes containing 1 mL of phosphate-buffered saline solution and kept at 37℃. TGF-β1, IGF-1, BMP-7 and VEGF-A release levels from dentine were measured using the enzyme-linked immunosorbent assay (ELISA) method at 24 h and at day 7. The volume of root canals was calculated using cone-beam computed tomography. The growth factor levels were calculated in ng/mL except VEGF-A (pg/ml). Normality analysis of the data was evaluated with the Kolmogorov-Smirnov test. Statistical analysis was performed using the Mann-Whitney-U and Wilcoxon tests.

RESULTS

Regardless of the activation type and sampling time, EDTA caused significantly more IGF release than did CA, whereas EDTA and CA were equally effective for the release of the other growth factors. For either EDTA or CA, the lowest and highest growth factor release levels were observed in the CSI and Er:YAG laser groups, respectively (p < .05). All of the growth factors were released significantly more at 24 h than on day 7 (p < .05).

CONCLUSIONS

Irrigation activation techniques with EDTA or CA increased the release levels of all growth factors from the dentine of canal walls in extracted premolar teeth.

Effect of Inducible BMP-7 Expression on the Osteogenic Differentiation of Human Dental Pulp Stem Cells

BMP-7 has shown inductive potential for in vitro osteogenic differentiation of mesenchymal stem cells, which are an ideal resource for regenerative medicine. Externally applied, recombinant BMP-7 was able to induce the osteogenic differentiation of DPSCs but based on our previous results with BMP-2, we aimed to study the effect of the tetracyclin-inducible BMP-7 expression on these cells. DPSC, mock, and DPSC-BMP-7 cell lines were cultured in the presence or absence of doxycycline, then alkaline phosphatase (ALP) activity, mineralization, and mRNA levels of different osteogenic marker genes were measured. In the DPSC-BMP-7 cell line, the level of BMP-7 mRNA significantly increased in the media supplemented with doxycycline, however, the expression of Runx2 and noggin genes was upregulated only after 21 days of incubation in the osteogenic medium with doxycycline. Moreover, while the examination of ALP activity showed reduced activity in the control medium containing doxycycline, the accumulation of minerals remained unchanged in the cultures. We have found that the induced BMP-7 expression failed to induce osteogenic differentiation of DPSCs. We propose three different mechanisms that may worth investigating for the engineering of expression systems that can be used for the induction of differentiation of mesenchymal stem cells.

Drug Delivery Assessment of a Novel Triple Antibiotic-Eluting Injectable Platelet-Rich Fibrin Scaffold: An In Vitro Study

BACKGROUND

Intracanal disinfection is a critical, yet challenging goal for long-term success in regenerative-based treatments. This in-vitro study aimed to assess the release profile of triple antibiotic- eluting Injectable Platelet-Rich Fibrin (I-PRF) constructs in 28 days.

METHODS

I-PRF scaffolds containing triple antibiotic mixture [Metronidazole (MET), Ciprofloxacin (CIP), and Minocycline (MINO)] by immersion (group one), I-PRF scaffolds containing triple antibiotic mixture by integration (group two), and antibiotic-free I-PRF scaffolds (group three) were fabricated. The antibiotic release from the scaffolds was measured using High-Performance Liquid Chromatography (HPLC) (the mobile phase of 0.1% formic acid and methanol (35:65 v/v), a C18 analytical column (150 × 4.6 mm, 5 μm) at a flow rate of 0.7 mL/min, at 25ºC) at days 1, 3, 7, 14, 21, and 28.

RESULTS

Retention times for MINO, CIP, and MET were achieved as 2.3, 2.6, and 3.1 min, respectively. The maximum UV absorbance values for CIP, MET, and MINO were 268 nm, 278 nm, and 350 nm, respectively. The results of the first group showed burst release within the first 24 hours followed by sustained maintenance of all three antibiotics up to 14 days. MINO and MET were still detectable in the third week. The second group could not sustainably release the antibiotics.

CONCLUSION

The developed method for the simultaneous identification and quantification of each antibiotic in I-PRF was sensitive and quick. Overall, group one could take up the antibiotics in adequate quantities and then subsequently release them over the study period.

Development of an antibacterial nanocomposite hydrogel for human dental pulp engineering

Hydrogel-based regenerative endodontic procedures (REPs) are considered to be very promising therapeutic strategies to reconstruct the dental pulp (DP) tissue in devitalized human teeth. However, the success of the regeneration process is limited by residual bacteria that may persist in the endodontic space after the disinfection step and contaminate the biomaterial. The aim of this work was to develop an innovative fibrin hydrogel incorporating clindamycin (CLIN)-loaded Poly (d,l) Lactic Acid (PLA) nanoparticles (NPs) to provide the hydrogel with antibacterial properties. CLIN-PLA-NPs were synthesized by a surfactant-free nanoprecipitation method and their microphysical properties were assessed by dynamic light scattering, electrophoretic mobility and scanning electron microscopy. Their antimicrobial efficacy was evaluated on Enteroccocus fæcalis by the determination of the minimal inhibitory concentration (MIC) and the minimal biofilm inhibition and eradication concentrations (MBIC and MBEC). Antibacterial properties of the nanocomposite hydrogel were verified by agar diffusion assays. NP distribution into the hydrogel and release from it were evaluated using fluorescent PLA-NPs. NP cytotoxicity was assessed on DP mesenchymal stem cells (DP-MSCs) incorporated into the hydrogel. Type I collagen synthesis was investigated after 7 days of culture by immunohistochemistry. We found that CLIN-PLA-NPs displayed a drug loading of 10 ± 2 μg per mg of PLA polymer and an entrapment efficiency of 43 ± 7%. Antibiotic loading did not affect NP size, polydispersity index and zeta potential. The MIC for Enterococcus fæcalis was 32 μg mL-1. MBIC50 and MBEC50 were 4 and 16 μg mL-1, respectively. CLIN-PLA-NPs appeared homogenously distributed throughout the hydrogel. CLIN-PLA-NP-loaded hydrogels clearly inhibited E. faecalis growth. DP-MSC viability and type I collagen synthesis within the fibrin hydrogel were not affected by CLIN-PLA-NPs. In conclusion, CLIN-PLA-NP incorporation into the fibrin hydrogel gave the latter antibacterial and antibiofilm properties without affecting cell viability and function. This formulation could help establish an aseptic environment supporting DP reconstruction and, accordingly, might be a valuable tool for REPs.

Regenerative Endodontic Procedures for the Treatment of Necrotic Mature Teeth with Apical Periodontitis: A Systematic Review and Meta-analysis of Randomized Controlled Trials

INTRODUCTION

Regenerative endodontic procedures (REPs) are intended to repair and regenerate part of the pulp-dentin complex. The aim of this study was to systematically appraise the existing evidence on the effectiveness of REPs on mature teeth with pulp necrosis and apical periodontitis.

METHODS

Electronic database and hand searches were performed on 8 databases of published and unpublished literature from inception to January 3, 2021, for the identification of randomized controlled trials (RCTs) or prospective clinical trials. The related key words included "regenerative," "pulp revascularization," "revitalization procedure," and "necrotic mature teeth." A random effects meta-analysis was conducted assessing success as the main outcome treatment. Risk of bias was assessed through the Cochrane Risk of Bias 2.0 tool, and the quality of the evidence was assessed with the Grading of Recommendations Assessment, Development and Evaluation approach.

RESULTS

Of the 337 initial hits, 4 RCTs were eligible for inclusion, whereas 3 were included in the quantitative synthesis. Overall, there was no difference in the relative risk for a successful/unsuccessful treatment outcome between REPs or conventional treatment (3 studies, relative risk = 1.03; 95% confidence interval, 0.92-1.15; P = .61; heterogeneity I² = 0.0%, P = .53; prediction interval = 0.51-2.09). Risk of bias ranged from low to raising some concerns, whereas the quality of the evidence was graded as moderate.

CONCLUSIONS

Based on moderate-quality evidence, REPs appear as a viable treatment alternative for mature necrotic teeth with periapical lesions at present. Furthermore, well-designed RCTs might also provide confirmatory evidence in this respect while also framing a backbone for standardization of the therapeutic protocol of REPs.

Antibacterial agent-releasing scaffolds in dental tissue engineering

It seems quite challenging in tissue engineering to synthesize a base material with a range of essential activities, including biocompatibility, nontoxicity, and antimicrobial activities. Various types of materials are synthesized to solve the problem. This study aimed to provide the latest relevant information for practitioners about antibacterial scaffolds in dental tissue engineering. The PubMed search engine was used to review the relevant studies with a combination of the following terms as search queries: tissue engineering, scaffolds, antimicrobial, dentistry, dental stem cells, and oral diseases. It is noteworthy to state that only the terms related to tissue engineering in dentistry were considered. The antimicrobial scaffolds support the local tissue regeneration and prevent adverse inflammatory reactions; however, not all scaffolds have such positive characteristics. To resolve this potential defect, different antimicrobial agents are used during the synthesis process. Innovative methods in guided tissue engineering are actively working towards new ways to control oral and periodontal diseases.

LncRNA MALAT1 Functions as a Competing Endogenous RNA to Regulate BMI1 Expression by Sponging miR-200c/miR-203 in the Control of the Differentiation of Pulp Cells

BACKGROUND

Long non-coding RNAs (lncRNAs) and miRNAs (microRNAs) are considered as key regulators of several biological processes, including dental development. In this study, we explored the lncRNAs and miRNAs which are involved in dental development.

METHOD

Real-time PCR was performed to identify the candidate lncRNAs and miRNAs involved in dental development. Bioinformatics analysis and luciferase assay were carried out to establish the regulatory relationships between MALAT1, miR-203 and miR-200c in dental development.

RESULTS

Among all candidate lncRNAs, only MALAT1 was highly expressed in differentiated human dental pulp cells (hDPCs), and among all candidate miRNAs which are down-regulated in differentiated hDPCs, miR-203, and miR-200c are most decreased. Furthermore, MALAT1 was up-regulated while miR-203 and miR-200c were down-regulated in differentiated hDPCs in a time-dependent manner. MiR-203 and miR-200c were proved to bind to MALAT1. Moreover, BMI1 was identified as a target gene of miR-203 or miR-200c, and BMI1 was time-dependently decreased in hDPCs cultured with odontogenic medium. On the contrary, dentin sialophosphoprotein (DSPP), dentin matrix protein-1 (DMP-1), osteocalcin (OCN), and alkaline phosphatase (ALP), were time-dependently increased in hDPCs cultured with odontogenic medium. Finally, the overexpression of MALAT1 and the knockdown of miR-203/miR-200c both significantly increased the levels of BMI1, DSPP, DMP-1, OCN, and ALP, while the effect of knockdown of miR-203/miR-200c was much stronger than that of the overexpression of MALAT1.

CONCLUSION

Our results demonstrated that MALAT1 functions as a competing endogenous RNA of miR-203 and miR-200c and accordingly promotes BMI1 expression. Therefore, MALAT1 may serve as a biomarker for dental development.