Vegetable Peel Waste for the Production of ZnO Nanoparticles and its Toxicological Efficiency, Antifungal, Hemolytic, and Antibacterial Activities

Phase controlled green synthesis of wurtzite (P63mc) ZnO nanoparticles: interplay of green ligands with precursor anions, anisotropy and photocatalysis

Green approaches for nanosynthesis often lack the precise control of synthetic outcomes, which is primarily due to the poorly defined reaction protocols. Herein, we investigated the use of lignocellulosic agro-waste, sugarcane press mud (PM), for the synthesis of ZnO nanoparticles using three different precursor salts and their further application in the photocatalytic degradation of rhodamine dyes. This approach resulted in the formation of ZnO nanoparticles with two different morphologies, i.e., sheet-like structure from the zinc sulphate and nitrate precursors, whereas sphere-like structures from zinc acetate. In all three cases, the wurtzite phase (P63mc) of ZnO nanoparticles remained consistent. Also, the ZnO nanoparticles were found to be positively charged ("ζ" = +8.81 to +9.22 mv) and nearly monodispersed, with a size and band gap in the range of ∼14-20 nm and 3.78-4.1 eV, respectively. Further, the potential photocatalytic activity of these nanoparticles was investigated under direct sunlight. At the same photocatalyst dose of 0.1 g L-1, the three ZnO nanoparticles showed varying efficiencies due to their shape anisotropy. The ZnO NPs from acetate salt (∼20 nm, sheet like) showed the highest dye degradation efficiency (90.03%) in 4.0 hours, indicating the role of the catalyst-dye interface in designing efficient photocatalysts.

Facile biosynthesis of Ag-ZnO nanocomposites using Launaea cornuta leaf extract and their antimicrobial activity

The quest to synthesize safe, non-hazardous Ag-ZnO nanoomposites (NCs) with improved physical and chemical properties has necessitated green synthesis approaches. In this research, Launaea cornuta leaf extract was proposed for the green synthesis of Ag-ZnO NCs, wherein the leaf extract was used as a reducing and capping agent. The antibacterial activity of the prepared nanoomposites was investigated against Escherichia coli and Staphylococcus aureus through the disc diffusion method. The influence of the synthesis temperature, pH, and precursor concentration on the synthesis of the Ag-ZnO NCs and antimicrobial efficacy were investigated. The nanoparticles were characterized by ATR-FTIR, XRD, UV-Vis, FESEM, and TEM. The FTIR results indicated the presence of secondary metabolites in Launaea cornuta which assisted the green synthesis of the nanoparticles. The XRD results confirmed the successful synthesis of crystalline Ag-ZnO NCs with an average particle size of 21.51 nm. The SEM and TEM images indicated the synthesized nanoparticles to be spherical in shape. The optimum synthesis conditions for Ag-ZnO NCs were at 70 °C, pH of 7, and 8% silver. Antibacterial activity results show Ag-ZnO NCs to have higher microbial inhibition on E. coli than on S. aureus with the zones of inhibition of 21 ± 1.08 and 19.67 ± 0.47 mm, respectively. Therefore, the results suggest that Launaea cornuta leaf extract can be used for the synthesis of Ag-ZnO NCs.

Recent advances in the synthesis, characterization and biomedical applications of zinc oxide nanoparticles

Zinc oxide nanoparticles (ZnONPs) have become the widely used metal oxide nanoparticles and drawn the interest of global researchers due to their biocompatibility, low toxicity, sustainability and cost-effective properties. Due to their unique optical and chemical properties, it emerges as a potential candidate in the fields of optical, electrical, food packaging and biomedical applications. Biological methods using green or natural routes are more environmentally friendly, simple and less use of hazardous techniques than chemical and/or physical methods in the long run. In addition, ZnONPs are less harmful and biodegradable while having the ability to greatly boost pharmacophore bioactivity. They play an important role in cell apoptosis because they enhance the generation of reactive oxygen species (ROS) and release zinc ions (Zn2+), causing cell death. Furthermore, these ZnONPs work well in conjunction with components that aid in wound healing and biosensing to track minute amounts of biomarkers connected to a variety of illnesses. Overall, the present review discusses the synthesis and most recent developments of ZnONPs from green sources including leaves, stems, bark, roots, fruits, flowers, bacteria, fungi, algae and protein, as well as put lights on their biomedical applications such as antimicrobial, antioxidant, antidiabetic, anticancer, anti-inflammatory, antiviral, wound healing, and drug delivery, and modes of action associated. Finally, the future perspectives of biosynthesized ZnONPs in research and biomedical applications are discussed.

Sunlight-assisted photocatalytic degradation of orange G dye using cost-effective zinc oxide nanoparticles

We have used an environmentally friendly approach to produce zinc oxide nanoparticles from an aqueous extract of Cucumis maderaspatanus L. leaves (Cm-ZnO NPs). Leaf extract phytoconstituents work as both reducing and stabilising agents. Calcination at 300, 500, 700, and 800 °C allowed fine-tuning of the bandgap of synthesised Cm-ZnO NPs, which has been well-characterized. The XRD analysis confirmed the crystalline nature of the Cm-ZnO NPs. The Cm-ZnO NPs were found to be spherical and averaged 8.6 nm in size, as determined by transmission electron microscopy and field emission scanning electron microscopy. TGA testing validated the nanoparticles' resilience to heat. The zeta potential measurements showed that the Cm-ZnO NPs were stable. By analysing the sorption of nitrogen onto the nanoparticles, we were able to calculate their surface area, which came in at 19 m2/g. The degradation of orange G (OG) dye in the presence of hydrogen peroxide (H2O2) served as an oxidizing agent and measured the photocatalytic efficiency of the Cm-ZnO NPs. In addition, the effect of varying dye, H2O2, and catalyst concentrations on photodegradation was studied. The rate of reactions was computed. In conclusion, the obtained data demonstrated that the produced Cm-ZnO NPs can be employed as a cost-efficient catalyst for textile industrial effluent treatment.

Nanomaterials for the treatment of bacterial infection by photothermal/photodynamic synergism

In the past few decades, great progress has been made in the field of nanomaterials against bacterial infection. However, with the widespread emergence of drug-resistant bacteria, people try their best to explore and develop new antibacterial strategies to fight bacteria without obtaining or increasing drug resistance. Recently, multi-mode synergistic therapy has been considered as an effective scheme for the treatment of bacterial infections, especially the combination of photothermal therapy (PTT) and photodynamic therapy (PDT) with controllable, non-invasive, small side effects and broad-spectrum antibacterial characteristics. It can not only improve the efficiency of antibiotics, but also do not promote antibiotic resistance. Therefore, multifunctional nanomaterials which combine the advantages of PTT and PDT are more and more used in the treatment of bacterial infections. However, there is still a lack of a comprehensive review of the synergistic effect of PTT and PDT in anti-infection. This review first focuses on the synthesis of synergistic photothermal/photodynamic nanomaterials and discusses the ways and challenges of photothermal/photodynamic synergism, as well as the future research direction of photothermal/photodynamic synergistic antibacterial nanomaterials.

Using inorganic nanoparticles to fight fungal infections in the antimicrobial resistant era

Fungal infections pose a serious threat to human health and livelihoods. The number and variety of clinically approved antifungal drugs is very limited, and the emergence and rapid spread of resistance to these drugs means the impact of fungal infections will increase in the future unless alternatives are found. Despite the significance and major challenges associated with fungal infections, this topic receives significantly less attention than bacterial infections. A major challenge in the development of fungi-specific drugs is that both fungi and mammalian cells are eukaryotic and have significant overlap in their cellular machinery. This lack of fungi-specific drug targets makes human cells vulnerable to toxic side effects from many antifungal agents. Furthermore, antifungal drug resistance necessitates higher doses of the drugs, leading to significant human toxicity. There is an urgent need for new antifungal agents, specifically those that can limit the emergence of new resistant species. Non-drug nanomaterials have primarily been explored as antibacterial agents in recent years; however, they are also a promising source of new antifungal candidates. Thus, this article reviews current research on the use of inorganic nanoparticles as antifungal agents. We also highlight challenges facing antifungal nanoparticles and discuss possible future research opportunities in this field. STATEMENT OF SIGNIFICANCE: Fungal infections pose a growing threat to human health and livelihood. The rapid spread of resistance to current antifungal drugs has led to an urgent need to develop alternative antifungals. Nanoparticles have many properties that could make them useful antimycotic agents. To the authors' knowledge, there is no published review so far that has comprehensively summarized the current development status of antifungal inorganic nanomaterials, so we decided to fill this gap. In this review, we discussed the state-of-the-art research on antifungal inorganic nanoparticles including metal, metal oxide, transition-metal dichalcogenides, and inorganic non-metallic particle systems. Future directions for the design of inorganic nanoparticles with higher antifungal efficacy and lower toxicity are described as a guide for further development in this important area.

The ‘Edge Effect’ Phenomenon in Plants: Morphological, Biochemical and Mineral Characteristics of Border Tissues

The ‘edge’ effect is considered one of the fundamental ecological phenomena essential for maintaining ecosystem integrity. The properties of plant outer tissues (root, tuber, bulb and fruit peel, tree and shrub bark, leaf and stem trichomes) mimic to a great extent the ‘edge’ effect properties of different ecosystems, which suggests the possibility of the ‘edge’ effect being applicable to individual plant organisms. The most important characteristics of plant border tissues are intensive oxidant stress, high variability and biodiversity of protection mechanisms and high adsorption capacity. Wide variations in morphological, biochemical and mineral components of border tissues play an important role in the characteristics of plant adaptability values, storage duration of roots, fruit, tubers and bulbs, and the diversity of outer tissue practical application. The significance of outer tissue antioxidant status and the accumulation of polyphenols, essential oil, lipids and minerals, and the artificial improvement of such accumulation is described in connection with plant tolerance to unfavorable environmental conditions. Methods of plant ‘edge’ effect utilization in agricultural crop breeding, production of specific preparations with powerful antioxidant value and green nanoparticle synthesis of different elements have been developed. Extending the ‘edge’ effect phenomenon from ecosystems to individual organisms is of fundamental importance in agriculture, pharmacology, food industry and wastewater treatment processes.

Functionalized graphene oxide-zinc oxide hybrid material and its deployment for adsorptive removal of levofloxacin from aqueous media

This work reports on the synthesis of aspartic acid-functionalized graphene oxide-zinc oxide, as a functional porous material, and its potential to mitigate levofloxacin (LFXN). The adsorbent was characterized by various techniques, including ultraviolet-visible (UV-Vis), Fourier transform infrared (FT-IR) spectroscopy, powder X-ray diffraction (PXRD), and scanning electron microscopy (SEM). The average crystallite size of the prepared composite was about 17.30 nm. Batch adsorption studies were carried out to elucidate the adsorption process for LFXN. Different parameters, including contact time, LFXN initial concentration, adsorbent concentration, pH, temperature, and ionic strength were studied. The mechanism and kinetics were studied by fitting the data to Freundlich and Langmuir isotherms, pseudo-first-order and pseudo-second-order kinetic models, respectively. The isotherm data was better fitted to Langmuir isotherm (R² = 0.999) as compared to the Freundlich model. The maximum adsorption capacity obtained at equilibrium was 73.15 mg/g. For kinetic studies, Pseudo first order was better fitted with R² = 0.87797, confirming the physisorption process. Thermodynamics parameters revealed that the process was exothermic and spontaneous at low temperatures. The adsorption mechanism was studied and the impregnation of LFXN in the adsorbent was confirmed by FTIR studies. This research proved that the designed GO/Asp-ZnO was a novel and promising adsorbent for the removal of LFXN with an efficiency of 95.12% at 30 mg/L LFXN by 0.6 g/L adsorbent in 24 h at pH = 7 and T = 25 °C.

Plants and rhizospheric environment: Affected by zinc oxide nanoparticles (ZnO NPs). A review

Nowadays, there are many critical concerns in the agricultural sector, including reduced productivity of plants due to various environmental factors. Hence, a continuous innovation of existing technologies is necessary. Among the available technologies for sustainable agriculture, nanotechnology is one of the more promising technologies and has a great scope for development in agriculture. Zinc oxide nanoparticles (ZnO NPs) have attracted much attention due to their good properties and can be put into agriculture as nano-fertilizers, nano-growth regulators and nano-pesticides, although much remains to be explored about their mechanisms. Here, we review the literature on the interaction of ZnO NPs with plants through (i) uptake and transport pathways of ZnO NPs in plants. (ii) The mechanisms involved in improving growth, development and resistance. (iii) their effects on the rhizospheric environment. (iv) The toxic effects and mechanisms in plants. Our major conclusions are as follows: (1) they can be absorbed by the plant through the roots and leaves, with subsequent transformation. (2) moderate application can promote plant growth and mitigate stress, while excessive application can produce toxic effects. (3) the effects of them on the rhizospheric environment cannot be ignored. This study may provide a reference for the safe and effective use of ZnO NPs in agricultural production.

A Critical Review of the Antimicrobial and Antibiofilm Activities of Green-Synthesized Plant-Based Metallic Nanoparticles

Metallic nanoparticles (MNPs) produced by green synthesis using plant extracts have attracted huge interest in the scientific community due to their excellent antibacterial, antifungal and antibiofilm activities. To evaluate these pharmacological properties, several methods or protocols have been successfully developed and implemented. Although these protocols were mostly inspired by the guidelines from national and international regulatory bodies, they suffer from a glaring absence of standardization of the experimental conditions. This situation leads to a lack of reproducibility and comparability of data from different study settings. To minimize these problems, guidelines for the antimicrobial and antibiofilm evaluation of MNPs should be developed by specialists in the field. Being aware of the immensity of the workload and the efforts required to achieve this, we set out to undertake a meticulous literature review of different experimental protocols and laboratory conditions used for the antimicrobial and antibiofilm evaluation of MNPs that could be used as a basis for future guidelines. This review also brings together all the discrepancies resulting from the different experimental designs and emphasizes their impact on the biological activities as well as their interpretation. Finally, the paper proposes a general overview that requires extensive experimental investigations to set the stage for the future development of effective antimicrobial MNPs using green synthesis.

Effects of Waste-Derived ZnO Nanoparticles against Growth of Plant Pathogenic Bacteria and Epidermoid Carcinoma Cells

Green synthesis of zinc oxide nanoparticles (ZnO NPs) has recently gained considerable interest because it is simple, environmentally friendly, and cost-effective. This study therefore aimed to synthesize ZnO NPs by utilizing bioactive compounds derived from waste materials, mangosteen peels, and water hyacinth crude extracts and investigated their antibacterial and anticancer activities. As a result, X-ray diffraction analysis confirmed the presence of ZnO NPs without impurities. An ultraviolet–visible absorption spectrum showed a specific absorbance peak around 365 nm with an average electronic band gap of 2.79 eV and 2.88 eV for ZnO NPs from mangosteen peels and a water hyacinth extract, respectively. An SEM analysis displayed both spherical shapes of ZnO NPs from the mangosteen peel extract (dimension of 154.41 × 172.89 nm) and the water hyacinth extract (dimension of 142.16 × 160.30 nm). Fourier transform infrared spectroscopy further validated the occurrence of bioactive molecules on the produced ZnO NPs. By performing an antibacterial activity assay, these green synthesized ZnO NPs significantly inhibited the growth of Xanthomonas oryzae pv. oryzae, Xanthomonas axonopodis pv. citri, and Ralstonia solanacearum. Moreover, they demonstrated potent anti-skin cancer activity in vitro. Consequently, this study demonstrated the possibility of using green-synthesized ZnO NPs in the development of antibacterial or anticancer agents. Furthermore, this research raised the prospect of increasing the value of agricultural waste.

Green Metallic Nanoparticles: Biosynthesis to Applications

Current advancements in nanotechnology and nanoscience have resulted in new nanomaterials, which may pose health and environmental risks. Furthermore, several researchers are working to optimize ecologically friendly procedures for creating metal and metal oxide nanoparticles. The primary goal is to decrease the adverse effects of synthetic processes, their accompanying chemicals, and the resulting complexes. Utilizing various biomaterials for nanoparticle preparation is a beneficial approach in green nanotechnology. Furthermore, using the biological qualities of nature through a variety of activities is an excellent way to achieve this goal. Algae, plants, bacteria, and fungus have been employed to make energy-efficient, low-cost, and nontoxic metallic nanoparticles in the last few decades. Despite the environmental advantages of using green chemistry-based biological synthesis over traditional methods as discussed in this article, there are some unresolved issues such as particle size and shape consistency, reproducibility of the synthesis process, and understanding of the mechanisms involved in producing metallic nanoparticles via biological entities. Consequently, there is a need for further research to analyze and comprehend the real biological synthesis-dependent processes. This is currently an untapped hot research topic that required more investment to properly leverage the green manufacturing of metallic nanoparticles through living entities. The review covers such green methods of synthesizing nanoparticles and their utilization in the scientific world.

Antibacterial fluorescent nano-sized lanthanum-doped carbon quantum dot embedded polyvinyl alcohol for accelerated wound healing

Bacteria is one of the main culprits that cause human diseases and pose long-term challenges to people's health. Rare earth elements have unique antibacterial advantages, but little research is available. In this paper, we reported an antibacterial composite film based on lanthanum-doped carbon quantum dot nanoparticles (La@N-P-CQDs) and polyvinyl alcohol (PVA) film for fluorescence of antibiotics and accelerating wound healing. PVA/La@N-P-CQDs composite film presented excellent hydrophilicity, biocompatibility, fluorescence intensity, and antibacterial effects. The antibacterial activity of La@N-P-CQDs was evaluated by employing antibacterial assay using Escherichia coli (E.coli)and Staphylococcus aureus (S.aureus) in vitro. La@N-P-CQDs showed enhanced antibacterial activity compared with N-P-CQDs. Moreover, the PVA/La@N-P-CQDs composite film with 0.5 mg/mL La@N-P-CQDs showed better antibacterial capability and wound healing performance than PVA and PVA/N-P-CQDs films in bacterial adhesion experiment. PVA/La@N-P-CQDs composite film could be used for wound dressing in vivo experiment and had no side effects on major organs in mice. The antibacterial composite film significantly promoted in vivo wound healing process because of its multifunctional properties. Therefore, it was an excellent candidate for wound dressing.

Efficient one-pot synthesis of 4-hydroxy-2H chromene by heterogeneously catalyzed ZnO NP and mesoporous aluminosilicate catalysts in solvent free condition

4-Hydroxy-2H chromenes are fused benzopyran rings, an important class of biologically active compounds that are widely used as antibacterial, antiviral, antitumor, and anticancer agents. In this paper, we report the synthesis of 4-hydroxy-2H chromenes using two catalysts: (i) ZnO nanoparticles and (ii) mesoporous ZnO/AlSBA-15(7). The ZnO nanoparticle catalyst was prepared using leaf extract, and ZnO/AlSBA-15(7) catalysts were prepared by a wet chemical route. All catalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared (FTIR) spectroscopy, and N2 sorption techniques. The catalytic activity of the synthesized catalyst was evaluated in a one-pot reaction using aromatic aldehyde and coumarin and was found to have a maximum yield of 81% at 80 °C, with a catalyst dose of 10 mmol %, and in a time limit of 4 h.

Bio-prospective potential of Pleurotus djamor and Pleurotus florida mycelial extracts towards Gram positive and Gram negative microbial pathogens causing infectious disease

BACKGROUND

The emergence of resistance to commonly used antibiotics by human infections occurred mostly due to their overuse, that prompted individuals to pursue novel and innovative treatments. The phytochemical characteristics, antibacterial activity, and cytotoxicity of MCF7 cells were evaluated in two Pleurotus spp. mycelial extracts in this work.

METHODS

Pleurotus djamor and Pleurotus florida mycelial extracts from pure cultures were tested for antibacterial activity by a well-diffusion assay and antimicrobial activity against mold fungi was evaluated for biomass inhibition. Mycelial extracts were obtained from dichloromethane extracts and their biophysical characteristics are analyzed by UV-vis spectrum and FTIR analysis. By spraying detection reagents onto TLC plates, the chemicals in dichloromethane extraction of chosen mushroom fungus mycelia were identified. Using the MTT test, the cytotoxic effect of dichloromethane extracts of selected mushroom fungi was evaluated on MCF7 Cell lines.

RESULTS

Mycelial extracts of P. djamor and P. florida exhibited significant antimicrobial effect on the bacterial and fungal pathogens tested. Dichloromethane mycelial extracts were obtained using soxhlet extraction which response positive for various phytochemical analysis. Detection of metabolites in thin layer chromatography using spray reagents documented one of few first accounts on flavonoids, anthroquinone and terpenoid compounds in P. djamor and P. florida. P. djamor and P. florida had dose-dependent antiproliferative activity against MCF7 cells, with an inhibitory impact of 55.72% and 64.47% percent at 125 μg/mL, respectively.

CONCLUSION

The study has reported the identification with the potent biological activity of some of the key bioactive components present in DCM extracts from the mycelia of P. djamor and P. florida.

Evaluating antimicrobial activities of Acanthus ilicifolius L. and Heliotropium curassavicum L against bacterial pathogens: an in-vitro study

BACKGROUND

Biomedical research, recently, focus more on searching for biomasses that contain extractable biologically active components for formulating new drugs. Halophytes growing in hyper saline conditions are expected to produce stress alleviating bioactive compounds. These phytochemicals could be the better raw materials for formulating new drugs.

METHODS

The purpose of this work was to describe physiologically active compounds from Acanthus ilicifolius and Heliotropium curassavicum that had antimicrobial, antioxidant and nutraceutical properties utilizing a variety of solvents. Analysis of bioactive compounds included the application of common phytochemical screening assays, proximate analysis, FTIR analysis and antioxidant assays. The disc diffusion technique was used to determine the antibacterial activity of the plant extracts.

RESULTS

Highest extraction yield was observed with methanol. A. ilicifolius methanolic extracts included a variety of bioactive components, including alkaloids, saponins, phenolics, flavonoids, steroids, cardiac glycosides, tannins, and terpenoids. H. curassavicum extracts showed the presence of all the phytochemicals except cardiac glycosides. The overall phenolic concentration and antioxidant capacity of A. ilicifolius were substantially greater. The antimicrobial assays explored that among the tested bacterial pathogens viz., Bacillus subtilis, Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, Streptococcus pneumoniae, significant level of control was observed in E. coli, K. pneumoniae and B. subtilis, which were significantly susceptible to both the plant extracts at a concentration of 50 μg/ml.

CONCLUSION

The reports from the current investigation explored the possibility of utilizing these halophytes in nutraceutical formulations. The current study sheds light on the possibility of halophytes as natural secondary metabolites and bioactive chemicals with potential for antimicrobials.

Visible light assisted photocatalytic degradation of commercial dyes and waste water by Sn-F co-doped titanium dioxide nanoparticles with potential antimicrobial application

The disintegration of natural water sources signals out the scarcity of adam's ale and will be hurdle for the human physical state. So it is necessary to decrease waste loads and hence pressure on the ecology for the sustainability of fishery and dye industry. Herein, TiO₂ nanoparticles doped with Sn and F are synthesized and the influence of simultaneous doping on the optical, surface morphological, structural, photocatalytic and antibacterial activities are investigated. Doping of TiO₂ with Sn and F suppress the growth of both anatase and rutile phase because of the dissimilar boundaries. All the prepared doped and undoped samples are found to possess tetragonal structure. The influence of F and Sn in TiO₂ lattice is recognized with the XRD and FT-IR spectra of the prepared particles The size of the obtained nanoparticles decreases as increasing concentration of F and Sn. TiO₂ is showing the presence of spherical and ellipsoidal nanoparticles whereas doped samples showing nanobulk, pentagons and rods. The absorption edge of the doped samples are blue shifted with increasing concentration of dopants indicates the control of optical absorption property of TiO_2. The visible light assisted photocatalytic degradation of fish processing waste water by doped and undoped samples are found to be established as 0.0076/min and 0.0071/min respectively. Visible light assisted degradation of commercially available dyes and fish processing waste water is assessed. Methyl blue showed enhanced photocatalytic activity under visible light irradiation compared to Methyl orange. It is observed that all the prepared particles show good antimicrobial activity against Staphylococcus aureus.

Cell-free extract assisted synthesis of ZnO nanoparticles using aquatic bacterial strains: Biological activities and toxicological evaluation

The introduction of novel bacterial strains and the development of microbial approaches for nanoparticles biosynthesis could minimize the negative environmental impact and eliminate the concern and challenges of the available approaches. In this study, a biological method based on microbial cell-free extract was used for biosynthesis of ZnO NPs using two new aquatic bacteria, Marinobacter sp. 2C8 and Vibrio sp. VLA. The synthesized ZnO NPs were characterized by UV-Visible spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), atomic force microscope (AFM), dynamic light scattering (DLS) and zeta potential. The UV-Visible absorption peak was found to be at 266 and 250 nm for ZnO-2C8 NPs and ZnO-VLA NPs, respectively. FTIR study suggested that the hydroxyl, amine, and carboxyl groups of bacterial proteins are mainly responsible for stabilizing the biosynthesized ZnO NPs. The formation of hexagonal wurtzite structure of ZnO NPs was confirmed by the XRD pattern. The morphology of the nanoparticles was found to be spherical with the average particle size of about 10.23 ± 2.48 nm and 20.26 ± 4.44 nm for ZnO-2C8 NPs and ZnO-VLA NPs, respectively. The values of zeta potential indicate the high stability of the biosynthesized ZnO NP. Zeta potential values indicated the high stability of the biosynthesized ZnO NP and were obtained -20.54 ± 7.15 and -23.87 ± 2.29 mV for ZnO-2C8 NPs and ZnO-VLA NPs, respectively. The biosynthesized ZnO NPs had antibacterial activity against Gram-negative and Gram-positive strains and possessed excellent antibiofilm activity with the maximum inhibition of about 96.55% at 250 µg/mL. The DPPH activity of ZnO-2C8 NPs and ZnO-VLA NPs were found 88.9% and 85.7% for 2500 μg/mL concentration, respectively. The toxicity test revealed the biocompatibility of the biosynthesized ZnO NPs. The results suggested that this approach is a very good route for synthesizing ZnO NPs with potential applications in biotechnology.

Terrestrial snail-mucus mediated green synthesis of silver nanoparticles and in vitro investigations on their antimicrobial and anticancer activities

Over the past few years, biogenic methods for designing silver nanocomposites are in limelight due to their ability to generate semi-healthcare and para-pharmaceutical consumer goods. The present study reports the eco-friendly synthesis of silver nanoparticles from the hitherto unexplored mucus of territorial snail Achatina fulica by the facile, clean and easily scalable method. The detailed characterization of the resultant samples by UV-Visible Spectroscopy, FESEM-EDS, XRD and FTIR Spectroscopy techniques corroborated the formation of silver nanoparticles in snail mucus matrix. The resultant samples were tested against a broad range of Gram positive and Gram negative bacteria like Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, Pseudomonas aeruginosa and a fungal strain Aspergillus fumigatus by well diffusion method. The results indicate that silver nanoparticles in mucus matrix exhibit strong antibacterial as well as antifungal activity. The pertinent experiments were also performed to determine the inhibitory concentration against both bacterial and fungal strains. Anticancer activity was executed by in vitro method using cervical cancer cell lines. Curiously, our biogenically synthesized Ag nanoparticles in biocompatible mucus revealed anticancer activity and demonstrated more than 15% inhibition of Hela cells. We suggest an interesting possibility of formulating antimicrobial and possibly anticancer creams/gels for topical applications in skin ailments.

Comparative study of chemically synthesized and low temperature bio-inspired Musa acuminata peel extract mediated zinc oxide nanoparticles for enhanced visible-photocatalytic degradation of organic contaminants in wastewater treatment

Zinc oxide (ZnO) photocatalysts were successfully synthesized via chemical and green, environmentally-benign methods. The work highlights the valorization of banana peel (BP) waste extract as the reducing and capping agents to produce pure, low temperature, highly crystalline, and effective ZnO nanoparticles with superior photocatalytic activities for the removal of hazardous Basic Blue 9 (BB9), crystal violet (CV), and cresol red (CR) dyes in comparison to chemically synthesized ZnO. Their formation and morphologies were verified by various optical spectroscopic and electron microscopic techniques. XRD results revealed that the biosynthesized ZnO exhibited 15.3 nm crystallite size when determined by Scherrer equation, which was smaller than the chemically synthesized ZnO. The FTIR spectra confirmed the presence of biomolecules in the green-mediated catalyst. EDX and XPS analyses verified the purity and chemical composition of ZnO. Nitrogen sorption analysis affirmed the high surface area of bio-inspired ZnO. Maximum removal efficiencies were achieved with 30 mg green ZnO catalyst, 2.0 × 10^-5 M BB9 solution, alkaline pH 12, and irradiation time 90 min. Green-mediated ZnO showed superior photodegradation efficiency and reusability than chemically synthesized ZnO. Therefore, this economical, environment-friendly photocatalyst is applicable for the removal of organic contaminants in wastewater treatment under visible light irradiation.

Fabrication of Gelatin-ZnO Nanofibers for Antibacterial Applications

In this study, GNF@ZnO composites (gelatin nanofibers (GNF) with zinc oxide (ZnO) nanoparticles (NPs)) as a novel antibacterial agent were obtained using a wet chemistry approach. The physicochemical characterization of ZnO nanoparticles (NPs) and GNF@ZnO composites, as well as the evaluation of their antibacterial activity toward Gram-positive (Staphyloccocus aureus and Bacillus pumilus) and Gram-negative (Escherichia coli and Pseudomonas fluorescens) bacteria were performed. ZnO NPs were synthesized using a facile sol-gel approach. Gelatin nanofibers (GNF) were obtained by an electrospinning technique. GNF@ZnO composites were obtained by adding previously produced GNF into a Zn2+ methanol solution during ZnO NPs synthesis. Crystal structure, phase, and elemental compositions, morphology, as well as photoluminescent properties of pristine ZnO NPs, pristine GNF, and GNF@ZnO composites were characterized using powder X-ray diffraction (XRD), FTIR analysis, transmission and scanning electron microscopies (TEM/SEM), and photoluminescence spectroscopy. SEM, EDX, as well as FTIR analyses, confirmed the adsorption of ZnO NPs on the GNF surface. The pristine ZnO NPs were highly crystalline and monodispersed with a size of approximately 7 nm and had a high surface area (83 m2/g). The thickness of the pristine gelatin nanofiber was around 1 µm. The antibacterial properties of GNF@ZnO composites were investigated by a disk diffusion assay on agar plates. Results show that both pristine ZnO NPs and their GNF-based composites have the strongest antibacterial properties against Pseudomonas fluorescence and Staphylococcus aureus, with the zone of inhibition above 10 mm. Right behind them is Escherichia coli with slightly less inhibition of bacterial growth. These properties of GNF@ZnO composites suggest their suitability for a range of antimicrobial uses, such as in the food industry or in biomedical applications.

Identification of novel bioactive molecules from garlic bulbs: A special effort to determine the anticancer potential against lung cancer with targeted drugs

Garlic (Allium sativum L.), is a predominant spice, which is used as an herbal medicine and flavoring agent, since ancient times. It has a rich source of various secondary metabolites such as flavonoids, terpenoids and alkaloids, which have various pharmacological properties. Garlic is used in the treatment of various ailments such as cancer, diabetes and cardiovascular diseases. The present study aims to explore the plausible mechanisms of the selected phytocompounds as potential inhibitors against the known drug targets of non-small-cell lung cancer (NSCLC). The phytocompounds of garlic were identified by gas chromatography-mass spectrometry (GC–MS) technique. Subsequently, the identified phytocompounds were subjected to molecular docking to predict the binding with the drug targets, epidermal growth factor receptor (EGFR), human epidermal growth factor receptor 2 (HER2), echinoderm microtubule-associated protein-like 4-anaplastic lymphoma kinase (EML4-ALK) and group IIa secretory phospholipase A2 (sPLA2-IIA). Molecular dynamics is used to predict the stability of the identified phytocompounds against NSCLC drug targets by refining the intermolecular interactions formed between them. Among the 12 phytocompounds of garlic, three compounds[1,4-dimethyl-7-(1-methylethyl)-2-azulenyl]phenylmethanone, 2,4-bis(1-phenylethyl)-phenol and 4,5–2 h-oxazole-5-one,4-[3,5-di-t-butyl-4-methoxyphenyl] methylene-2-phenyl were identified as potential inhibitors, which might be suitable for targeting the different clinical forms of EGFR and dual inhibition of the studied drug targets to combat NSCLC. The result of this study suggest that these identified phytocompounds from garlic would serve as promising leads for the development of lead molecules to design new multi-targeting drugs to address the different clinical forms of NSCLC.

Green synthesis of triclinic (anorthic) phase AgCoPO4 nanoparticles: optical studies and theoretical modelling

We report the plant-mediated synthesis, structural investigation, optical properties and theoretical modelling of a triclinic (anorthic) phase AgCoPO4 nanoparticles for the first time. As part of green chemistry, the secondary metabolites in the leaf extract of Canna indica were engaged as the reducing/capping agent for the metal nanoparticles. X-ray diffraction (XRD) revealed the presence of an anorthic AgCoPO4 phase, crystallised in a triclinic structure with P -1 space group. Optical studies using UV-vis spectroscopy and photoluminescence are reported. Transmission electron microscopy suggests the formation of quasi-nanocube morphology, unlike the conventional spherically-shaped nanoparticles via plant-mediated reduction method. Elemental composition of the nanohybrid was confirmed by energy-dispersive x-ray spectroscopy (E.D.S.). Evidence of crystallinity was supported by selected area electron diffraction (SAED). Study of the dynamic anisotropy of the nanohybrid at optimised state suggests its proposed application as optical material in colourimetric metal nanoparticles-mediated sensors.

In vitro antioxidant and cytotoxic activities of polyherbal extracts from Vetiveria zizanioides, Trichosanthes cucumerina, and Mollugo cerviana on HeLa and MCF-7 cell lines

Various metabolites exist in the medicinal plants have lot of potential to cure various diseases and disorders. Plants such as, Vetiveria zizanioides, Trichosanthes cucumerina, and Mollugo cerviana were collected from Western Ghats, Tamilnadu, India. Phytochemicals were extracted from these plants using various organic solvents and tested against Gram-positive and Gram-negative bacteria. The phytochemicals such as, carbohydrate, alkaloids, steroids, saponins, flavonoids and tannin were detected from these medicinal plants. Among the extracts, methanol showed potent activity and this solvent was used to extract polyherbal medicinal plants. Methanol extract of V. zizanioides was found to be highly active against E. coli (27 ± 2 mm), P. mirabilis (19 ± 3 mm) and B. subtilis (18 ± 2 mm). Ethyl acetate extract showed high activity against E. coli (24 ± 2 mm), P. mirabilis (22 ± 3 mm) and B. subtilis (20 ± 1 mm). These three plants were taken at 1:1:1 ratio and extracted with methanol at 1:10 ratio and synergistic activity was tested against bacterial pathogens. Synergistic activity of polyherbal extract was analyzed. The extracted crude herbal medicine was found to be effective against Staphylococcus aureus, E. coli, Enterbacter sp., Pseudomonas aeruginosa, Bacillus subtilis and Proteus mirabilis. The zone of inhibition was 33 ± 3 mm, 17 ± 2 mm, 22 ± 2 mm, 40 ± 2 mm, 33 ± 1 mm and 38 ± 2 mm zone of inhibition against E. coli, S. aureus, P. aeruginosa, P. mirabilis, B. subtilis and Enterobacter sp. Polyherbal extract was found to be highly effective against P. mirabilis and Enterobacter sp. MIC values of polyherbal extract ranged from 29 ± 2.5 µg/ml to 34 ± 2.5 µg/ml. MIC value was found to be less against P. mirabilis and was high against S. aureus. Antioxidant property varied between 49 ± 3% and 95.3 ± 2%. At 20 µg/ml antioxidant activity was reported as 49 ± 3% and it was increased at higher concentrations of polyherbal extract. Two cell lines (HeLa and MCF cell lines) were selected to analyze cytotoxic activity of polyherbal extract. The methanol extract of polyherbal fraction showed cytotoxicity against these two cell lines. The LC50 value was 467 ± 2.9 µg/ml against HeLa cell line and >800 µg/ml against MCF-7 cell lines. The polyherbal extract showed antibacterial, antioxidant and anticancer activities.

Effect of traditionally used herb Pedalium murex L. and its active compound pedalitin on urease expression - For the management of kidney stone

Pedalium murex L. is a medicinal herb that has been used for the treatment of diseases related to kidney in the traditional system of medicine. The current study aims to study the effect of ethyl acetate extract of P. murex (EAEP) and its fractionated compound pedalitin against urease production and UreC gene expression in Proteus mirabilis. The selected reference strain Proteus mirabilis (MTCC 425) and the isolates culture of Proteus mirabilis were subjected to study the antibacterial efficacy of P. murex. Expression analysis of P. mirabilis urease gene was successfully done by QPCR. The ethyl acetate extract effectively inhibit the reference Proteus mirabilis and bacterial isolates of Proteus mirabilis in the clinical samples studied. EAEP has showed more potent activity (56.7%) against urease enzyme and pedalitin also exhibited potent activity (30.1%). Using qPCR, the expression of UreC gene of P. mirabilis was controlled by EAEP and also its bioactive compound pedalitin. The present study clearly demonstrated the potency of P. murex in controlling the growth of pathogenic P. mirabilis and to control the expression of urease enzyme production as well as to restrict the urease gene expression in P. mirabilis.

Evaluation of antidiabetic activity of Pleurotus pulmonarius against streptozotocin-nicotinamide induced diabetic wistar albino rats

The current research aims to evaluate the antidiabetic properties of Pleurotus pulmonarius, an edible basidiomycetes mushroom fungi in diabetic induced wistar albino rats. Mycelial Hot Water Extracts (HWE) and Acetone Extracts (AE) of Pleurotus pulmonarius was orally administrated to STZ-NA induced (55 mg/kilogram body weight) diabetic wistar albino rats at a concentration of 200 and 400 mg/kg for 4 weeks. The outcomes revealed that the HWE of Pleurotus pulmonarius resulted in a significant (p < 0.001) reduction in blood glucose level. A noteworthy (p < 0.001) reduction in serum lipid profile and elevation in High-Density Lipoprotein Cholesterol (HDL-C) after administration with HWE, also demonstrating the protective effects of HWE in diabetes-related complications. Besides all antidiabetic parameters, pathological morphology of the pancreas, liver and kidney are regularised. This observation indicated that HWE of Pleurotus pulmonarius possessed higher antidiabetic activity than AE. Besides, HWE also promoted a significant control of alpha amylase enzyme in a concentration-dependent manner with a maximum activity of 99.23% inhibition at 1000 µg/ml. The outcomes of the present study indicated that the HWE possesses a potential antidiabetic activity both in vitro and in vivo. Thus, it can be used as a nontoxic complementary drug in the controlling of diabetes and related complications, thus providing scientific authentication of its use as an antidiabetic agent.

New quercetin-coated titanate nanotubes and their radiosensitization effect on human bladder cancer

Interest in nanostructures such as titanate nanotubes (TNT) has grown notably in recent years due to their biocompatibility and economic viability, making them promising for application in the biomedical field. Quercetin (Qc) has shown great potential as a chemopreventive agent and has been widely studied for the treatment of diseases such as bladder cancer. Motivated by the possibilities of developing a new hybrid nanostructure with potential in biomedical applications, this study aimed to investigate the incorporation of quercetin in sodium (NaTNT) and zinc (ZnTNT) titanate nanotubes, and characterize the nanostructures formed. Qc release testing was also performed and cytotoxicity in Vero and T24 cell lines evaluated by the MTT assay. The effect of TNTs on T24 bladder cancer cell radiosensitivity was also assessed, using cell proliferation and a clonogenic assay. The TNT nanostructures were synthesized and characterized by FESEM, EDS, TEM, FTIR, XRD and TGA. The results showed that the nanostructures have a tubular structure and that the exchange of Na⁺ ions for Zn²⁺ and incorporation of quercetin did not alter this morphology. In addition, interaction between Zn and Qc increased the thermal stability of the nanostructures. The release test showed that maximum Qc delivery occurred after 24 h and the presence of Zn controlled its release. Biological assays indicated that the NaTNTQc and ZnTNTQc nanostructures decreased the viability of T24 cells after 48 h at high concentrations. Furthermore, the clonogenic assay showed that NaTNT, NaTNTQc, ZnTNT and ZnTNTQc combined with 5 Gy reduced the formation of polyclonal colonies of T24 cells after 48 h. The results suggest that the nanostructures synthesized in this study interfere in cell proliferation and can therefore be a powerful tool in the treatment of bladder cancer.

In-vitro antibacterial, antioxidant potentials and cytotoxic activity of the leaves of Tridax procumbens

The present study explored the phytochemicals, antibacterial, antioxidant and cytotoxic effect of Tridax procumbens leaves. The leaves were dried and extracted with various organic solvents. The leaves contained the phytochemicals such as alkaloids, carbohydrates, polyphenols and tannins respectively. Antimicrobial potentials of the extracts were determined by performing the disc diffusion techniques. Results revealed that different organic solvents extracts namely methanol, ethanol and ethyl acetate extracts documented comparatively good activity against the studied microbial strains. The methanol extract of leaves of T. procumbens showed combatively better antioxidant potential. The tested plant leaf extract showed high activity against human lung cancer cells than breast cancer cell lines. 250 µg/ml plants extract showed 84 ± 2.8% toxicity against human lung cancer cells.

Comparison of cytocompatibility and anticancer properties of traditional and green chemistry-synthesized tellurium nanowires

Background

Traditional physicochemical approaches for the synthesis of compounds, drugs, and nanostructures developed as potential solutions for antimicrobial resistance or against cancer treatment are, for the most part, facile and straightforward. Nevertheless, these approaches have several limitations, such as the use of toxic chemicals and production of toxic by-products with limited biocompatibility. Therefore, new methods are needed to address these limitations, and green chemistry offers a suitable and novel answer, with the safe and environmentally friendly design, manufacturing, and use of minimally toxic chemicals. Green chemistry approaches are especially useful for the generation of metallic nanoparticles or nanometric structures that can effectively and efficiently address health care concerns.

Objective

Here, tellurium (Te) nanowires were synthesized using a novel green chemistry approach, and their structures and cytocompatibility were evaluated.

Method

An easy and straightforward hydrothermal method was employed, and the Te nanowires were characterized using transmission electron microscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, X-ray powder diffraction, X-ray photoelectron spectroscopy, and optical microscopy for morphology, size, and chemistry. Cytotoxicity tests were performed with human dermal fibroblasts and human melanoma cells (to assess anticancer properties). The results showed that a treatment with Te nanowires at concentrations between 5 and 100 μg/mL improved the proliferation of healthy cells and decreased cancerous cell growth over a 5-day period. Most importantly, the green chemistry -synthesized Te nanowires outperformed those produced by traditional synthetic chemical methods.

Conclusion

This study suggests that green chemistry approaches for producing Te nanostructures may not only reduce adverse environmental effects resulting from traditional synthetic chemistry methods, but also be more effective in numerous health care applications.

Biogenic approach to synthesize rod shaped Gd2 O3 nanoparticles and its optimization using response surface methodology-Box-Behnken design model

The rare earth metal oxide nanoparticles such as gadolinium oxide nanoparticles (Gd₂ O₃ NPs) have been synthesized by green synthesis process using methanolic extract of Moringa oleifera (M oleifera) peel. In this process, the Gd₂ O₃ NPs formation was observed at 280-300 nm in UV-Vis spectroscopy. The XRD pattern of the synthesized Gd₂ O₃ NPs was exactly matched with JCPDS No 3-065-3181which confirms the crystalline nature of Gd₂ O₃ NPs. In addition, Energy-dispersive X-ray spectroscopy (EDX) analysis was stated that Gd and O elements were present as 70.31 and 29.69%, respectively in Gd₂ O₃ NPs. The SEM and TEM analysis were said Gd₂ O₃ NPs are in rod shape and 26 ± 2 nm in size. Further the synthesized Gd₂ O₃ NPs were confirmed by X-ray photoemission spectroscopy (XPS). The synthesized Gd₂ O₃ NPs were further examined for anti-fungal activity against Alternaria saloni (A saloni) and Sclerrotium rolfsii (S rolfsii) and it showed moderate activity. Also, Gd₂ O₃ NPs evaluated as good antibacterial agent against different Gram +ve and Gram -ve bacteria. Moreover, the toxicity of the Gd₂ O₃ NPs on red blood cells (RBCs) of the human blood was determined using hemolytic assay, the obtained results were stated the synthesized Gd₂ O₃ NPs are nontoxic to the human erythrocytes. The photocatalytic activity against malachite green (MG) dye was tested and confirmed as 92% of dye was degraded within 2 hr by Gd₂ O₃ NPs. The results were stated the green synthesized Gd₂ O₃ NPs are good anti-fungal agents, nontoxic and we can use as a photocatalyst. Copyright © 2019 John Wiley & Sons, Ltd.

Environmentally-Friendly Green Approach for the Production of Zinc Oxide Nanoparticles and Their Anti-Fungal, Ovicidal, and Larvicidal Properties

Green synthesis of nanoparticles can be an important alternative compared to conventional physio-chemical synthesis. We utilized Scadoxus multiflorus leaf powder aqueous extract as a capping and stabilizing agent for the synthesis of pure zinc oxide nanoparticles (ZnO NPs). Further, the synthesized ZnO NPs were subjected to various characterization techniques. Transmission electron microscope (TEM) analysis showed an irregular spherical shape, with an average particle size of 31 ± 2 nm. Furthermore, the synthesized ZnO NPs were tested against Aedes aegypti larvae and eggs, giving significant LC₅₀ value of 34.04 ppm. Ovicidal activity resulted in a higher percentage mortality rate of 96.4 ± 0.24 at 120 ppm with LC₅₀ value of 32.73 ppm. Anti-fungal studies were also conducted for ZnO NPs against Aspergillus niger and Aspergillus flavus, which demonstrated a higher inhibition rate for Aspergillus flavus compared to Aspergillus niger.

ZnO Nanostructures for Drug Delivery and Theranostic Applications

In the last two decades, zinc oxide (ZnO) semiconductor Quantum dots (QDs) have been shown to have fantastic luminescent properties, which together with their low-cost, low-toxicity and biocompatibility have turned these nanomaterials into one of the main candidates for bio-imaging. The discovery of other desirable traits such as their ability to produce destructive reactive oxygen species (ROS), high catalytic efficiency, strong adsorption capability and high isoelectric point, also make them promising nanomaterials for therapeutic and diagnostic functions. Herein, we review the recent progress on the use of ZnO based nanoplatforms in drug delivery and theranostic in several diseases such as bacterial infection and cancer.