Zirconia Nanoparticles-Induced Toxic Effects in Osteoblast-Like 3T3-E1 Cells

Zirconium dioxide nanoparticles induced cytotoxicity in rat cerebral cortical neurons and apoptosis in neuron-like N2a and PC12 cell lines

During recent decades, the application of zirconium dioxide nanoparticles (ZrO2-NP) has been expanded in various fields ranging from medicine to industry. It has been shown that ZrO2-NP has the potential to cross the blood-brain barrier (BBB) and induce neurotoxicity. In the current study, we investigated the in vivo neurotoxicity, as well as, the cellular mechanism of ZrO2-NP toxicity on two neuronal-like cell lines, PC12 and N2a. PC12 and N2a cells were exposed to increasing concentrations of ZrO2-NP (0-2000 µg/ml) for 48 h. The apoptotic effect of ZrO2-NP was determined using annexin V/propidium iodide double staining (by flow cytometry), and western blot analysis of relative apoptotic proteins, including caspase-3, caspase-9, bax, and bcl2. Based on our results, ZrO2-NP at concentrations of 250-2000 μg/mL increased both early and late-stage apoptosis in a concentration-dependent manner. Moreover, the expressions of cleaved-caspase-3 and -9 proteins and the bax/bcl2 ratio were significantly increased. In addition, oral administration of ZrO2-NP (50 mg/kg) to male Wistar rats for 28 days led to the loss of neuronal cells in the cerebral cortex. Taken together, our findings highlighted the role of apoptosis on cytotoxicity induced by ZrO2-NP.

Current developments and future perspectives of nanotechnology in orthopedic implants: an updated review

Orthopedic implants are the most commonly used fracture fixation devices for facilitating the growth and development of incipient bone and treating bone diseases and defects. However, most orthopedic implants suffer from various drawbacks and complications, including bacterial adhesion, poor cell proliferation, and limited resistance to corrosion. One of the major drawbacks of currently available orthopedic implants is their inadequate osseointegration at the tissue-implant interface. This leads to loosening as a result of immunological rejection, wear debris formation, low mechanical fixation, and implant-related infections. Nanotechnology holds the promise to offer a wide range of innovative technologies for use in translational orthopedic research. Nanomaterials have great potential for use in orthopedic applications due to their exceptional tribological qualities, high resistance to wear and tear, ability to maintain drug release, capacity for osseointegration, and capability to regenerate tissue. Furthermore, nanostructured materials possess the ability to mimic the features and hierarchical structure of native bones. They facilitate cell proliferation, decrease the rate of infection, and prevent biofilm formation, among other diverse functions. The emergence of nanostructured polymers, metals, ceramics, and carbon materials has enabled novel approaches in orthopaedic research. This review provides a concise overview of nanotechnology-based biomaterials utilized in orthopedics, encompassing metallic and nonmetallic nanomaterials. A further overview is provided regarding the biomedical applications of nanotechnology-based biomaterials, including their application in orthopedics for drug delivery systems and bone tissue engineering to facilitate scaffold preparation, surface modification of implantable materials to improve their osteointegration properties, and treatment of musculoskeletal infections. Hence, this review article offers a contemporary overview of the current applications of nanotechnology in orthopedic implants and bone tissue engineering, as well as its prospective future applications.

In Vitro Effects of Zirconia Nanoparticles: Uptake, Genotoxicity, and Mutagenicity in V-79 cells

Zirconia nanoparticles are used in various industrial and biomedical applications such as dental implants, thermal barrier sprays, and fuel cells. The interaction of nanoparticles with the environment and humans is inevitable. Despite the enormous application potential of these nanoparticles, there are still some gaps in the literature regarding potential toxicological mechanisms and the genotoxicity of zirconia nanoparticles. The lung is one of the main exposure routes to nanomaterials; therefore, the present study was designed to determine the genotoxic and mutagenic effect of zirconia NPs in V-79 lung cells. Zirconia nanoparticles showed significant internalization in cells at 100 μg/mL and 150 μg/mL concentrations. Zirconia nanoparticles showed low cytotoxicity and were found to generate ROS in V-79 cells. In alkaline comet assay, zirconia nanoparticles (10 μg/mL, 50 μg/mL, and 100 μg/mL) exposed cells exhibited significant DNA strand breaks, while the neutral comet assay, which was used for double-strand break assessment, only revealed significant damage at 100 μg/mL. Chromosomal aberration induced by zirconia nanoparticles mainly resulted in the generation of gaps, few fragments, and breaks which signifies the low clastogenic activity of these nanoparticles in the V-79 cell line. In MN assay, zirconia nanoparticles resulted in no significant micronuclei induction at any given concentration. In the HPRT mutation assay, the particle shows a dose-dependent increase in the mutant frequency. It is evident from the result that zirconia nanoparticles cause dose-dependent cytotoxicity and genotoxicity, but still, more studies are needed to evaluate the clastogenic potential and the possible mechanism involved.

Fabrication of novel nanofiber composed of gelatin/alginate with zirconium oxide NPs regulate orthodontic progression of cartilage degeneration on Wnt/β-catenin signaling axis in MC3T3-E1 cells

Natural macromolecules like alginate and gelatin are employed to create medication delivery systems that are both safe and effective. Zirconium nanoparticles (ZrO2 NPs) have been proposed as a means of enhancing the alginate-gelatin hydrogel's physical and biological properties. This study combines the synthesis of the biopolymers gelatin and alginate nanofibers with nanoparticles of zirconium oxide (GA/NF- ZrO2 NPs). UV, XRD, FTIR, and SEM were used to characterize the synthesized nanofibers. The expression of osteogenic genes was analyzed by western blotting and qualitative real-time polymerase chain reaction (qRT-PCR). Based on our findings, MC3T3-E1 cells are performed for cell viability, apoptosis and reactive oxygen species production by GA/NF- ZrO2 NPs through the Wnt/β-catenin signaling pathway. Cell migration was accelerated at 75 μg/mL concentration after 24 h of damage in a scratch wound healing assay. Proliferation of the MC3T3-E1 cell line was also detected. GA/NF-ZrO2 NPs influenced the osteogenic variation of MC3T3-E1 cells by inducing autophagy. Furthermore, the impact of obstruction on the temporomandibular joint (TMJ) is a subject of ongoing discussion and analysis within the context of animal models. Coordinated GA/NF-ZrO2 NPs on biomaterial nanofibers could be used to introduce physical signals for modifying MC3T3-E1 responds for orthodontic engineering constructs.

Intraoral low-temperature degradation of monolithic zirconia dental prostheses: 5-year results of a prospective clinical study with ex vivo monitoring

OBJECTIVES

To investigate the 5-year intraoral evolution and kinetics of low-temperature degradation (LTD) of second-generation monolithic prostheses made of 3% molar yttrium-doped tetragonal zirconia polycrystal (3Y-TZP) and the influence of masticatory mechanical stresses and glaze layer on this evolution.

METHODS

A total of 101 posterior tooth elements were included in this prospective clinical study, which comprised ex vivo LTD monitoring (at baseline, 6 months, 1 year, 2 years, 3 years, and 5 years) using Raman spectroscopy (n = 2640 monoclinic phase measurement points per evaluation time) and scanning electron microscopy (SEM). Four types of areas (1-2 mm2 surface, six on molars, and four on premolars) were analysed on each element surface: occlusal, axial, glazed, or unglazed. Raman mapping, high-resolution SEM, and focused ion beam-SEM were performed on selected samples.

RESULTS

The dental prostheses developed a tetragonal-to-monoclinic transformation at the extreme surface of the material after six months in a buccal environment, and this process increased significantly over time. Over the five years of monitoring, the transformation developed nonuniformly with the presence of localised clusters of monoclinic grains. Tribological stresses generate grain pull-out from these clusters, which may raise questions regarding the release of 3Y-TZP nanoparticles into the body. The prosthesis fracture rate was 4.5% after 5 years.

SIGNIFICANCE

LTD developed in vivo on the surfaces of 3Y-TZP dental prostheses and progressed slowly but significantly over time, up to 5 years investigation. However, the effects of aging on the failure rate recorded and of zirconia nanoparticles released into the body require further investigation.

Computational innovation of in situ metallic elements with zirconia as a novel possible carrier for chemotherapeutic medication

CONTEXT

Electronic sustainable behavior on the material surface and in situ metal configuration were accompted with some metal atoms like Li, Na, and K elements. Metal-doped ZrO2 crystal exported modified characteristics related to electronic conduction and exhibited some dynamic modification around the surface of the metal oxide. Computational perturbations were considered to discuss the modification behavior in addition to the studied Li, Na, and K metals. Optimization of the three doping systems was achieved followed by generating DOS and electronic band structure maps. A dynamic simulation was performed with temperature over 2000 k: the presence of the metal on the surface and prediction of its ZrO2 inclusion leading to access adsorption behavior, besides generating predictive designed models described the adsorption affinity on the solid-state surface. It cannot be neglected the importance of various metals as a main role in chemotherapy. Molecular docking investigation was considered to predict the binding behavior of the studied metal ZrO2 carrier system as an anticancer agent. Also, docking affinity was helpful in comparing the active sites binding for the studied metals, resulting in a notable binding affinity for both Li- and Na-zirconia incorporation.

METHODS

The program PWSCF, which is a component of the quantum ESPRESSO suite for quantum simulation of materials, was used to construct geometric systems. The generalized gradient approximation in the Perdew-Burke-Ernzerhof (GGA/PBE) function with D3 correction (Becke-Jonson damping) was applied to the exchange-correlation energy. As the last step in the DFT postulation and design, adsorption locator annealing was carried out on the convergent models using the Materials Studio simulation package. The main roles played by metal atoms are in protein binding and the suppression of bio-active regions. For the docking process, the protein was produced using AutoDock 4.2 and Discovery Studio software in accordance with the usual methodology. Chimera and Discovery Studio were used to examine the docking data that was processed after generating specific grid box dimensions for 7BTN.

Exploring the antibacterial and dermatitis-mitigating properties of chicken egg white-synthesized zinc oxide nano whiskers

Introduction

Zinc oxide nanoparticles (ZnO-NPs) have garnered considerable interest in biomedical research primarily owing to their prospective therapeutic implications in combatting pathogenic diseases and microbial infections. The primary objective of this study was to examine the biosynthesis of zinc oxide nanowhiskers (ZnO-NWs) using chicken egg white (albumin) as a bio-template. Furthermore, this study aimed to explore the potential biomedical applications of ZnO NWs in the context of infectious diseases.

Methods

The NWs synthesized through biological processes were observed using electron microscopy, which allowed for detailed examination of their characteristics. The results of these investigations indicated that the NWs exhibited a size distribution ranging from approximately 10 to 100 nm. Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX) mapping analyses successfully corroborated the size, dimensions, and presence of biological constituents during their formation. In this study, XTT assay and confocal imaging were employed to provide evidence of the efficacy of ZnO-NWs in the eradication of bacterial biofilms. The target bacterial strains were Staphylococcus aureus and Escherichia coli. Furthermore, we sought to address pertinent concerns regarding the biocompatibility of the ZnO-NWs. This was achieved through comprehensive evaluation of the absence of cytotoxicity in normal HEK-293T and erythrocytes.

Results

The findings of this investigation unequivocally confirmed the biocompatibility of the ZnO-NWs. The biosynthesized ZnO-NWs demonstrated a noteworthy capacity to mitigate the dermatitis-induced consequences induced by Staphylococcus aureus in murine models after a therapeutic intervention lasting for one week.

Discussion

This study presents a comprehensive examination of the biosynthesis of zinc oxide nanowhiskers (ZnO-NWs) derived from chicken egg whites. These findings highlight the considerable potential of biosynthesized ZnO-NWs as a viable option for the development of therapeutic agents targeting infectious diseases. The antibacterial efficacy of ZnO-NWs against both susceptible and antibiotic-resistant bacterial strains, as well as their ability to eradicate biofilms, suggests their promising role in combating infectious diseases. Furthermore, the confirmed biocompatibility of ZnO-NWs opens avenues for their safe use in biomedical applications. Overall, this research underscores the therapeutic promise of ZnO-NWs and their potential significance in future biomedical advancements.

Inflammatory, Oxidative Stress and Small Cellular Particle Response in HUVEC Induced by Debris from Endoprosthesis Processing

We studied inflammatory and oxidative stress-related parameters and cytotoxic response of human umbilical vein endothelial cells (HUVEC) to a 24 h treatment with milled particles simulating debris involved in sandblasting of orthopedic implants (OI). We used different abrasives (corundum-(Al₂O₃), used corundum retrieved from removed OI (u. Al₂O₃), and zirconia/silica composite (ZrO₂/SiO₂)). Morphological changes were observed by scanning electron microscopy (SEM). Concentration of Interleukins IL-6 and IL-1β and Tumor Necrosis Factor α (TNF)-α was assessed by enzyme-linked immunosorbent assay (ELISA). Activity of Cholinesterase (ChE) and Glutathione S-transferase (GST) was measured by spectrophotometry. Reactive oxygen species (ROS), lipid droplets (LD) and apoptosis were measured by flow cytometry (FCM). Detachment of the cells from glass and budding of the cell membrane did not differ in the treated and untreated control cells. Increased concentration of IL-1β and of IL-6 was found after treatment with all tested particle types, indicating inflammatory response of the treated cells. Increased ChE activity was found after treatment with u. Al₂O₃ and ZrO₂/SiO₂. Increased GST activity was found after treatment with ZrO₂/SiO₂. Increased LD quantity but not ROS quantity was found after treatment with u. Al₂O₃. No cytotoxicity was detected after treatment with u. Al₂O₃. The tested materials in concentrations added to in vitro cell lines were found non-toxic but bioactive and therefore prone to induce a response of the human body to OI.

Expression of Interleukin-1β and Histological Changes of the Three-Dimensional Oral Mucosal Model in Response to Yttria-Stabilized Nanozirconia

Over the years, advancement in ceramic-based dental restorative materials has led to the development of monolithic zirconia with increased translucency. The monolithic zirconia fabricated from nano-sized zirconia powders is shown to be superior in physical properties and more translucent for anterior dental restorations. Most in vitro studies on monolithic zirconia have focused mainly on the effect of surface treatment or the wear of the material, while the nanotoxicity of this material is yet to be explored. Hence, this research aimed to assess the biocompatibility of yttria-stabilized nanozirconia (3-YZP) on the three-dimensional oral mucosal models (3D-OMM). The 3D-OMMs were constructed using human gingival fibroblast (HGF) and immortalized human oral keratinocyte cell line (OKF6/TERT-2), co-cultured on an acellular dermal matrix. On day 12, the tissue models were exposed to 3-YZP (test) and inCoris TZI (IC) (reference material). The growth media were collected at 24 and 48 h of exposure to materials and assessed for IL-1β released. The 3D-OMMs were fixed with 10% formalin for the histopathological assessments. The concentration of the IL-1β was not statistically different between the two materials for 24 and 48 h of exposure (p = 0.892). Histologically, stratification of epithelial cells was formed without evidence of cytotoxic damage and the epithelial thickness measured was the same for all model tissues. The excellent biocompatibility of nanozirconia, as evidenced by the multiple endpoint analyses of the 3D-OMM, may indicate the potential of its clinical application as a restorative material.

Study of the Embryonic Toxicity of TiO2 and ZrO2 Nanoparticles

Currently, the widespread use of TiO₂ and ZrO₂ nanoparticles (NPs) in various industries poses a risk in terms of their potential toxicity. A number of experimental studies provide evidence of the toxic effect of TiO₂ and ZrO₂ NPs on biological objects. In order to supplement the level of knowledge and assess the risks of toxicity and danger of TiO₂ and ZrO₂ NPs, we decided to conduct a comprehensive experiment to study the embryonic toxicity of TiO₂ and ZrO₂ NPs in pregnant rats. For the experiment, mongrel white rats during pregnancy received aqueous dispersions of powders of TiO₂ and ZrO₂ NPs at a dose of 100 mg/kg/day. To characterize the effect of TiO₂ and ZrO₂ NPs on females and the postnatal ontogenesis of offspring, a complex of physiological and biochemical research methods was used. The results of the experiment showed that TiO₂ NPs as ZrO₂ NPs (100 mg/kg per os) cause few shifts of similar orientation in the maternal body. Neither TiO₂ NPs nor ZrO₂ NPs have an embryonic and teratogenic effect on the offspring in utero, but both modify its postnatal development.

Identification of Zirconia Particle Uptake in Human Osteoblasts by ToF-SIMS Analysis and Particle-Size Effects on Cell Metabolism

As the use of zirconia-based nano-ceramics is rising in dentistry, the examination of possible biological effects caused by released nanoparticles on oral target tissues, such as bone, is gaining importance. The aim of this investigation was to identify a possible internalization of differently sized zirconia nanoparticles (ZrNP) into human osteoblasts applying Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS), and to examine whether ZrNP exposure affected the metabolic activity of the cells. Since ToF-SIMS has a low probing depth (about 5 nm), visualizing the ZrNP required the controlled erosion of the sample by oxygen bombardment. This procedure removed organic matter, uncovering the internalized ZrNP and leaving the hard particles practically unaffected. It was demonstrated that osteoblasts internalized ZrNP within 24 h in a size-dependent manner. Regarding the cellular metabolic activity, metabolization of alamarBlue by osteoblasts revealed a size- and time-dependent unfavorable effect of ZrNP, with the smallest ZrNP exerting the most pronounced effect. These findings point to different uptake efficiencies of the differently sized ZrNP by human osteoblasts. Furthermore, it was proven that ToF-SIMS is a powerful technique for the detection of zirconia-based nano/microparticles that can be applied for the cell-based validation of clinically relevant materials at the nano/micro scale.

Advancing dental implants: Bioactive and therapeutic modifications of zirconia

Zirconium-based implants have gained popularity in the dental implant field owing to their corrosion resistance and biocompatibility, attributed to the formation of a native zirconia (ZrO₂) film. However, enhanced bioactivity and local therapy from such implants are desirable to enable the earlier establishment and improved long-term maintenance of implant integration, especially in compromised patient conditions. As a result, surface modification of zirconium-based implants have been performed using various physical, chemical and biological techniques at the macro-, micro-, and nano-scales. In this extensive review, we discuss and detail the development of Zr implants covering the spectrum from past and present advancements to future perspectives, arriving at the next generation of highly bioactive and therapeutic nano-engineered Zr-based implants. The review provides in-depth knowledge of the bioactive/therapeutic value of surface modification of Zr implants in dental implant applications focusing on clinical translation.

Review on synthesis, properties and multifarious therapeutic applications of nanostructured zirconia in dentistry

Amongst dental ceramics, nano zirconia (ZrNp) has shown exceptional developments in the field of dentistry in recent years. Zirconia is an oxide that possess superior optical, mechanical, and biological properties. As a novel nanoparticle, it has been widely used in various fields of dentistry due to its improved mechanical properties, biocompatibility, and stable structure. Provision of metal free solutions is one of the prime requirements in dental materials. Many metal alloys used extensively possess unaesthetic colors and display chemical interactions in the oral cavity encouraging use of zirconia for dental use. Use of ZrNp based ceramics has increased due to its resistance to corrosion, superior color matching that enhances esthetics and improved strength compared to conventional biomaterials. This review discusses the recent scientific literature on the synthesis, properties and types, applications, and toxicity of ZrNp in the field of dentistry.

Biomimetic development of chitosan and sodium alginate-based nanocomposites contains zirconia for tissue engineering applications

Nanostructured materials possess unique structural and functional properties that play a crucial position in tissue engineering applications. Present investigation is aimed to synthesize chitosan-sodium alginate (CS) nanocomposite using hydrothermally prepared zirconia nanoparticles. In this, three different weight percentages of (0.5, 1, and 1.5) zirconia nanoparticles are utilized for the preparation of biomimetic nanocomposite scaffolds (CSZ) employing 4 wt% of CS by a solvent casting technique. Physico-chemical and thermal behavior of the prepared nanoparticles and their CSZ scaffolds are comprehensively characterized. Bioactivity of the prepared zirconia nanoparticles and CSZ scaffolds are explored in terms of in vitro biocompatibility, protein absorption in simulated body fluid (SBF), and phosphate buffered saline (PBS). Agar disc diffusion method is employed to identify the antibacterial property against Staphylococcus aureus and Escherichia coli. In vitro cytotoxicity of zirconia nanoparticles and CSZ scaffolds is identified against human urothelial carcinoma (UC6) and osteosarcoma (MG-63) cells. These studies explore that zirconia nanoparticles are suitable for biomedical applications while it is interacted with chitosan and sodium alginate (CS) due to their promising biocompatibility. Biomimetically obtained chitosan/sodium alginate scaffold contain 1 wt% zirconia nanoparticles show higher biocompatibility amenable for tissue engineering applications.

Metabolomic profiling of ZrO2 nanoparticles in MC3T3-E1 cells

The authors' previous study showed that zirconium oxide nanoparticles (ZrO2 NPs) induce toxic effects in MC3T3-E1 cells; however, its toxicological mechanism is still unclear. Liquid chromatography-mass spectrometry/time-of-flight mass spectrometry was used to reveal the metabolite profile and toxicological mechanism of MC3T3-E1 cells in response to ZrO2 NPs. The results demonstrated that MC3T3-E1 cells treated with ZrO2 NPs for 24 and 48 h presented different metabolic characteristics. Following ZrO2 NP treatment for 24 h, 96 upregulated and 129 downregulated metabolites in the positive ion mode, as well as 91 upregulated and 326 downregulated metabolites in the negative ion mode were identified. Following ZrO2 NP treatment for 48 h, 33 upregulated and 174 downregulated metabolites were identified in the positive ion mode, whereas 37 upregulated and 302 downregulated metabolites were confirmed in the negative ion mode. Among them, 42 differential metabolites were recognised as potential metabolites contributing to the induced toxic effects of ZrO2 NPs in MC3T3-E1 cells. Most of the differential metabolites were lysophosphatidylcholine and lysophosphatidylethanolamide, indicating that exposure to ZrO2 NPs may have a profound impact on human cellular function by impairing the membrane system. The results also provide new clues for the toxicological mechanism of ZrO2 NP dental materials.

Marine organisms: Pioneer natural sources of polysaccharides/proteins for green synthesis of nanoparticles and their potential applications

Current innovations in the marine bionanotechnology arena are supporting and stimulating developments in other fields, including nanomedicine, pharmaceuticals, sensors, environmental trends, food, and agriculture aspects. Many oceanic creatures, particularly algae, plants, bacteria, yeast, fungi, cyanobacteria, actinomyces, invertebrates, animals and sponges can survive under extreme circumstances. They can biogenerate a broad spectrum of phytochemicals/metabolites, including proteins, peptides, alkaloids, flavonoids, polyphenols, carbohydrate polymers, polysaccharides, sulfated polysaccharides, polysaccharide-protein complexes such as carrageenan, fucoidanase, fucoidan, carboxymethyl cellulose, poly-γ-glutamic acid, sugar residues with proteins, melanin, haemocyanin, etc). These products exhibit exclusive advantages that offer pioneering roles in the eco-friendly fabrication of several nanoparticles (NPs) i.e., Ag, Au, Ru, Fe₂O₃, Cobalt (III) Oxide (Co₂O₃), ZnO and Ag@AgCl within a single phase. Importantly, marine organisms can biosynthesize NPs in two modes, namely extracellular and intracellular. Biosynthesized NPs can be characterized using various methodologies among them, ultraviolet-visible spectroscopy, fourier transform infrared spectroscopy, transmission electron microscopy, X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. Taken together, this review focuses on the green synthesis of metallic, metallic oxides and nonmetallic NPs utilizing extracts/derivatives from marine organisms based on eco-friendly green biogenic procedures. Moreover, significant attention is given to the medicinal and industrial importance of such marine organisms mediated NPs.

Dental Implant Nano-Engineering: Advances, Limitations and Future Directions

Titanium (Ti) and its alloys offer favorable biocompatibility, mechanical properties and corrosion resistance, which makes them an ideal material choice for dental implants. However, the long-term success of Ti-based dental implants may be challenged due to implant-related infections and inadequate osseointegration. With the development of nanotechnology, nanoscale modifications and the application of nanomaterials have become key areas of focus for research on dental implants. Surface modifications and the use of various coatings, as well as the development of the controlled release of antibiotics or proteins, have improved the osseointegration and soft-tissue integration of dental implants, as well as their antibacterial and immunomodulatory functions. This review introduces recent nano-engineering technologies and materials used in topographical modifications and surface coatings of Ti-based dental implants. These advances are discussed and detailed, including an evaluation of the evidence of their biocompatibility, toxicity, antimicrobial activities and in-vivo performances. The comparison between these attempts at nano-engineering reveals that there are still research gaps that must be addressed towards their clinical translation. For instance, customized three-dimensional printing technology and stimuli-responsive, multi-functional and time-programmable implant surfaces holds great promise to advance this field. Furthermore, long-term in vivo studies under physiological conditions are required to ensure the clinical application of nanomaterial-modified dental implants.

Surface-modified ZrO2 nanoparticles with caffeic acid: Characterization and in vitro evaluation of biosafety for placental cells

The toxicity of hybrid nanoparticles, consisting of non-toxic components, zirconium dioxide nanoparticles (ZrO₂ NPs), and caffeic acid (CA), was examined against four different cell lines (HTR-8 SV/Neo, JEG-3, JAR, and HeLa). Stable aqueous ZrO₂ sol, synthesized by forced hydrolysis, consists of 3-4 nm in size primary particles organized in 30-60 nm in size snowflake-like particles, as determined by transmission electron microscopy and direct light scattering measurements. The surface modification of ZrO₂ NPs with CA leads to the formation of an interfacial charge transfer (ICT) complex followed by the appearance of absorption in the visible spectral range. The spectroscopic observations are complemented with the density functional theory calculations using a cluster model. The ZrO₂ NPs and CA are non-toxic against four different cell lines in investigated concentration range. Also, ZrO₂ NPs promote the proliferation of HTR-8 SV/Neo, JAR, and HeLa cells. On the other hand, hybrid ZrO₂/CA NPs induced a significant reduction of the viability of the JEG-3 cells (39 %) for the high concentration of components (1.6 mM ZrO₂ and 0.4 mM CA).

Inflammatory responses to metal oxide ceramic nanopowders

Ceramic orthopaedic implants are increasingly popular due to the need for robust total joint replacement implants that have a high success rate long-term and do not induce biological responses in patients. This study was designed to investigate the biological effects of ceramic nanopowders containing aluminium oxide or zirconium oxide to activate the human macrophage THP-1 cell line. In vitro investigation of pro-inflammatory gene expression and chemokine secretion was performed studied using RT-qPCR and ELISA, respectively. TLR4 inhibition, using a small-molecule inhibitor, was used to determine whether ceramic-mediated inflammation occurs in a similar manner to that of metals such as cobalt. THP-1 macrophages were primed with ceramics or LPS and then treated with ATP or ceramics, respectively, to determine whether these nanopowders are involved in the priming or activation of the NLRP3 inflammasome through IL-1β secretion. Cells treated with ceramics significantly increased pro-inflammatory gene expression and protein secretion which was attenuated through TLR4 blockade. Addition of ATP to cells following ceramic treatment significantly increased IL-1β secretion. Therefore, we identify the ability of ceramic metal oxides to cause a pro-inflammatory phenotype in THP-1 macrophages and propose the mechanism by which this occurs is primarily via the TLR4 pathway which contributes to inflammasome signalling.

Modifying an Implant: A Mini-review of Dental Implant Biomaterials

Dental implants have been used as far back as 2000BC, and since then have developed into highly sophisticated solutions for tooth replacement. It is becoming increasingly important for the materials used in dental implants to exhibit and maintain favorable long-term mechanical, biological and more recently, aesthetic properties. This review aims to assess the biomaterials used in modern dental implants, introducing their properties, and concentrating on modifications to improve these biomaterials. Focus is drawn to the prominent biomaterials, titanium (Ti) and zirconia due to their prevalence in implant dentistry. Additionally, novel coatings and materials with potential use as viable improvements or alternatives are reviewed. An effective dental biomaterial should osseointegrate, maintain structural integrity, resist corrosion and infection, and not cause systemic toxicity or cytotoxicity. Current materials such as bioactive glass offer protection against biofilm formation, and when combined with a titanium‐zirconium (TiZr) alloy, provide a reliable combination of properties to represent a competitive alternative. Further long-term clinical studies are needed to inform the development of next-generation materials.Significance StatementBiomaterials have become essential for modern implants. A suitable implant biomaterial integrates into the body to perform a key function, whilst minimizing negative immune response. Focusing on dentistry, the use of dental implants for tooth replacement requires a balance between bodily response, mechanical structure and performance, and aesthetics. This mini-review addresses the use of biomaterials in dental implants with significant comparisons drawn between Ti and zirconia. Attention is drawn to optimizing surface modification processes and the additional use of coatings. Alternatives and novel developments are addressed, providing potential implications of combining biomaterials to form novel composites that combine and synergize the benefits of each material.

[Nanomaterials in the modern dentistry (review)]

Was to study the promising areas for using nanotechnologies in dentistry, existing methods of diagnostics, treatment and prevention of the dental diseases based on the properties of nanoparticles, to review the scientific literature devoted to this problem. In this literature review we use 86 sources: 1 Russian and 85 foreign articles. Analyzed articles were published within the last 5 years. The literature review summarizes and presents up-to-date methods of diagnosing, treating, and preventing dental disease that use nanotechnologies. Development and implementation of nanotechnological treatment are a promising direction for modern dentistry.

Local Cellular Responses to Metallic and Ceramic Nanoparticles from Orthopedic Joint Arthroplasty Implants

Over the last decades, joint arthroplasty has become a successful treatment for joint disease. Nowadays, with a growing demand and increasingly younger and active patients accepting these approaches, orthopedic surgeons are seeking implants with improved mechanical behavior and longer life span. However, aseptic loosening as a result of wear debris from implants is considered to be the main cause of long-term implant failure. Previous studies have neatly illustrated the role of micrometric wear particles in the pathological mechanisms underlying aseptic loosening. Recent osteoimmunologic insights into aseptic loosening highlight the important and heretofore underrepresented contribution of nanometric orthopedic wear particles. The present review updates the characteristics of metallic and ceramic nanoparticles generated after prosthesis implantation and summarizes the current understanding of their hazardous effects on peri-prosthetic cells.

Effect of Zirconium oxide nanoparticle on serum level of testosterone and spermatogenesis in the rat: An experimental study

BACKGROUND

Zirconium nanoparticles are used as health agents, pharmaceutical carriers, and in dental and orthopedic implants.

OBJECTIVE

This studyaimed to investigate the effects of Zirconium oxide nanoparticles on the process of spermatogenesis in rat.

MATERIALS AND METHODS

In this experimental study, 32 male Wistar rats (150-200 gr), with range of age 2.5 to 3 months were used and divided into four groups of eight per each. The control group received 0.5 ml of distilled water and the three experimental groups received 50, 200, and 400 ppm doses of Zirconium oxide nanoparticles solution over a 30-day period, respectively. At the end of the experiment, tissue sections were taken from the testis and stained with hematoxylin-eosin. Serum concentration of testosterone was measured by enzyme-linked immunosorbent assay.

RESULTS

In the experimental group receiving 400 ppm Zirconium oxide nanoparticles, the number of Spermatogonia cells (p ≤ 0.01), Spermatocytes (p ≤ 0.01), Spermatids (p ≤ 0.001), and sertoli and Leydig cells (p ≤ 0.05) showed a significant decrease compared to the control group. Serum testosterone concentration did not change significantly in all experimental groups receiving Zirconium oxide nanoparticles compared to the control group. Experimental group received 400 ppm Zirconium oxide nanoparticles shrinkage of seminal tubules and reduced lumen space compared to control group.

CONCLUSION

Zirconium oxide nanoparticles are likely to damage the testes by increasing Reactive oxygen species production and free radicals.

Functions and applications of metallic and metallic oxide nanoparticles in orthopedic implants and scaffolds

Bone defects and diseases are devastating, and can lead to severe functional deficits or even permanent disability. Nevertheless, orthopedic implants and scaffolds can facilitate the growth of incipient bone and help us to treat bone defects and diseases. Currently, a wide range of biomaterials with distinct biocompatibility, biodegradability, porosity, and mechanical strength is used in bone-related research. However, most orthopedic implants and scaffolds have certain limitations and diverse complications, such as limited corrosion resistance, low cell proliferation, and bacterial adhesion. With recent advancements in materials science and nanotechnology, metallic and metallic oxide nanoparticles have become the subject of significant interest as they offer an ample variety of options to resolve the existing problems in the orthopedic industry. More importantly, these nanoparticles possess unique physicochemical and mechanical properties not found in conventional materials, and can be incorporated into orthopedic implants and scaffolds to enhance their antimicrobial ability, bioactive molecular delivery, mechanical strength, osteointegration, and cell labeling and imaging. However, many metallic and metallic oxide nanoparticles can also be toxic to nearby cells and tissues. This review article will discuss the applications and functions of metallic and metallic oxide nanoparticles in orthopedic implants and bone tissue engineering.

Bone metabolism regulation: Implications for the treatment of bone diseases

Bone cells in the human body are continuously engaged in cellular metabolism, including the interaction between bone cells, the interaction between the erythropoietic cells of the bone marrow and stromal cells, for the remodeling and reconstruction of bone. Osteoclasts and osteoblasts play an important role in bone metabolism. Diseases occur when bone metabolism is abnormal, but little is known about the signaling pathways that affect bone metabolism. The study of these signaling pathways will help us to use the relevant techniques to intervene, so as to improve the condition. The study of these signaling pathways will help us to use the relevant techniques to intervene, so as to improve the condition. I believe they will shine in the diagnosis and treatment of future clinical bone diseases.

Zirconium Oxide Thin Films Obtained by Atomic Layer Deposition Technology Abolish the Anti-Osteogenic Effect Resulting from miR-21 Inhibition in the Pre-Osteoblastic MC3T3 Cell Line

Introduction

The development of the field of biomaterials engineering is rapid. Various bioactive coatings are created to improve the biocompatibility of substrates used for bone regeneration, which includes formulation of thin zirconia coatings with pro-osteogenic properties. The aim of this study was to assess the biological properties of ZrO₂ thin films grown by Atomic Layer Deposition (ALD) technology (ZrO₂^ALD).

Methodology

The cytocompatibility of the obtained layers was analysed using the mice pre-osteoblastic cell line (MC3T3) characterized by decreased expression of microRNA 21-5p (miR-21-5p) in order to evaluate the potential pro-osteogenic properties of the coatings. The in vitro experiments were designed to determine the effect of ZrO₂^ALD coatings on cell morphology (confocal microscope), proliferative activity (cell cycle analysis) and metabolism, reflected by mitochondrial membrane potential (cytometric-based measurement). Additionally, the influence of layers on the expression of genes associated with cell survival and osteogenesis was studied using RT-qPCR. The following genes were investigated: B-cell lymphoma 2 (Bcl-2), Bcl-2-associated X protein (Bax), p53 and p21, as well as osteogenic markers, i.e. collagen type 1 (Coll-1), osteopontin (Opn), osteocalcin (Ocl) and runt-related transcription factor 2 (Runx-2). The levels of microRNA (miRNA/miR) involved in the regulation of osteogenic genes were determined, including miR-7, miR-21, miR-124 and miR-223.

Results

The analysis revealed that the obtained coatings are cytocompatible and may increase the metabolism of pre-osteoblast, which was correlated with increased mitochondrial membrane potential and extensive development of the mitochondrial network. The obtained coatings affected the viability and proliferative status of cells, reducing the population of actively dividing cells. However, in cultures propagated on ZrO₂^ALD coatings, the up-regulation of genes essential for bone metabolism was noted.

Discussion

The data obtained indicate that ZrO₂ coatings created using the ALD method may have pro-osteogenic properties and may improve the metabolism of bone precursor cells. Given the above, further development of ZrO₂^ALD layers is essential in terms of their potential clinical application in bone regenerative medicine.

Full-spectrum responsive ZrO2-based phototheranostic agent for NIR-II photoacoustic imaging-guided cancer phototherapy

A second near-infrared window (NIR-II) responsive, cancer targeting ZrO₂-based phototheranostic agent has been fabricated for imaging-guided precise synergetic phototherapy.

Potential role of the IL17RC gene in the thoracic ossification of the posterior longitudinal ligament

The thoracic ossification of the posterior longitudinal ligament (T-OPLL) can cause thoracic spinal stenosis, which results in intractable myelopathy and radiculopathy. Our previous whole-genome sequencing study first reported rs199772854 in the interleukin 17 receptor C (IL17RC) gene as a potentially pathogenic loci for T-OPLL. The aim of the present study was to examine the effects of the IL17RC gene rs199772854A site mutation on osteogenesis by establishing a model of osteogenic differentiation. IL17RC gene mutation site and wild-type site mouse embryonic osteoblast (3T3-E1) models were constructed in order to induce the differentiation of the cells into osteoblasts. Whether the mutation site causes the abnormal expression of the IL17RC gene and osteogenic markers was analyzed by reverse transcription-quantitative polymerase chain reaction (RT-qPCR) and western blot analysis. The IL17RC gene rs199772854A site mutation was demonstrated to play a biological role through the overexpression of its own gene, and also to significantly increase the expression levels of osteogenic markers. Furthermore, the mutation upregulated the expression of the key proteins, tumor necrosis factor receptor (TNFR)-associated factor 6 (TRAF6) and nuclear factor (NF)-κB, in the interleukin (IL)-17 signaling axis. On the whole, the findings of this study suggest that the IL17RC gene rs199772854A loci mutation propels mouse embryonic osteoblasts towards osteogenic differentiation and may play an important role in the pathogenesis of T-OPLL. The IL17RC gene may promote osteogenesis through the IL-17 signaling pathway and may thus be involved in the process of ectopic osteogenesis in T-OPLL.