Process analysis and optimization of simultaneous saccharification and co-fermentation of ethylenediamine-pretreated corn stover for ethanol production

Impact of xylan on field productivity and wood saccharification properties in aspen

Xylan that comprises roughly 25% of hardwood biomass is undesirable in biorefinery applications involving saccharification and fermentation. Efforts to reduce xylan levels have therefore been made in many species, usually resulting in improved saccharification. However, such modified plants have not yet been tested under field conditions. Here we evaluate the field performance of transgenic hybrid aspen lines with reduced xylan levels and assess their usefulness as short-rotation feedstocks for biorefineries. Three types of transgenic lines were tested in four-year field tests with RNAi constructs targeting either Populus GT43 clades B and C (GT43BC) corresponding to Arabidopsis clades IRX9 and IRX14, respectively, involved in xylan backbone biosynthesis, GATL1.1 corresponding to AtGALT1 involved in xylan reducing end sequence biosynthesis, or ASPR1 encoding an atypical aspartate protease. Their productivity, wood quality traits, and saccharification efficiency were analyzed. The only lines differing significantly from the wild type with respect to growth and biotic stress resistance were the ASPR1 lines, whose stems were roughly 10% shorter and narrower and leaves showed increased arthropod damage. GT43BC lines exhibited no growth advantage in the field despite their superior growth in greenhouse experiments. Wood from the ASPR1 and GT43BC lines had slightly reduced density due to thinner cell walls and, in the case of ASPR1, larger cell diameters. The xylan was less extractable by alkali but more hydrolysable by acid, had increased glucuronosylation, and its content was reduced in all three types of transgenic lines. The hemicellulose size distribution in the GALT1.1 and ASPR1 lines was skewed towards higher molecular mass compared to the wild type. These results provide experimental evidence that GATL1.1 functions in xylan biosynthesis and suggest that ASPR1 may regulate this process. In saccharification without pretreatment, lines of all three constructs provided 8-11% higher average glucose yields than wild-type plants. In saccharification with acid pretreatment, the GT43BC construct provided a 10% yield increase on average. The best transgenic lines of each construct are thus predicted to modestly outperform the wild type in terms of glucose yields per hectare. The field evaluation of transgenic xylan-reduced aspen represents an important step towards more productive feedstocks for biorefineries.

Bioethanol Production from Lignocellulosic Biomass-Challenges and Solutions

Regarding the limited resources for fossil fuels and increasing global energy demands, greenhouse gas emissions, and climate change, there is a need to find alternative energy sources that are sustainable, environmentally friendly, renewable, and economically viable. In the last several decades, interest in second-generation bioethanol production from non-food lignocellulosic biomass in the form of organic residues rapidly increased because of its abundance, renewability, and low cost. Bioethanol production fits into the strategy of a circular economy and zero waste plans, and using ethanol as an alternative fuel gives the world economy a chance to become independent of the petrochemical industry, providing energy security and environmental safety. However, the conversion of biomass into ethanol is a challenging and multi-stage process because of the variation in the biochemical composition of biomass and the recalcitrance of lignin, the aromatic component of lignocellulose. Therefore, the commercial production of cellulosic ethanol has not yet become well-received commercially, being hampered by high research and production costs, and substantial effort is needed to make it more widespread and profitable. This review summarises the state of the art in bioethanol production from lignocellulosic biomass, highlights the most challenging steps of the process, including pretreatment stages required to fragment biomass components and further enzymatic hydrolysis and fermentation, presents the most recent technological advances to overcome the challenges and high costs, and discusses future perspectives of second-generation biorefineries.

An Integrated Process for the Xylitol and Ethanol Production from Oil Palm Empty Fruit Bunch (OPEFB) Using Debaryomyces hansenii and Saccharomyces cerevisiae

Oil palm empty fruit bunch (OPEFB) is the largest biomass waste from the palm oil industry. The OPEFB has a lignocellulose content of 34.77% cellulose, 22.55% hemicellulose, and 10.58% lignin. Therefore, this material’s hemicellulose and cellulose content have a high potential for xylitol and ethanol production, respectively. This study investigated the integrated microaerobic xylitol production by Debaryomyces hansenii and anaerobic ethanol semi simultaneous saccharification and fermentation (semi-SSF) by Saccharomyces cerevisiae using the same OPEFB material. A maximum xylitol concentration of 2.86 g/L was obtained with a yield of 0.297 g/g_xylose. After 96 h of anaerobic fermentation, the maximum ethanol concentration was 6.48 g/L, corresponding to 71.38% of the theoretical ethanol yield. Significant morphological changes occurred in the OPEFB after hydrolysis and xylitol and ethanol fermentation were shown from SEM analysis.

Production of bioethanol from food waste: Status and perspectives

There is an immediate global requirement for an ingenious strategy for food waste conversion to biofuels in order to replace fossil fuels with renewable resources. Food waste conversion to bioethanol could lead to a sustainable process having the dual advantage of resolving the issue of food waste disposal as well as meeting the energy requirements of the increasing population. Food waste is increasing at the rate of 1.3 billion tonnes per year, considered to be one-third of global food production. According to LCA studies discarding these wastes is detritus to the environment, therefore; it is beneficial to convert the food waste into bioethanol. The CO₂ emission in this process offers zero impact on the environment as it is biogenic. Among several pretreatment strategies, hydrothermal pretreatment could be a better approach for pretreating food waste because it solubilizes organic solids, resulting in an increased recovery of fermentable sugars to produce bioenergy.

Coprocessing Corn Germ Meal for Oil Recovery and Ethanol Production: A Process Model for Lipid-Producing Energy Crops

Efforts to engineer high-productivity crops to accumulate oils in their vegetative tissue present the possibility of expanding biodiesel production. However, processing the new crops for lipid recovery and ethanol production from cell wall saccharides is challenging and expensive. In a previous study using corn germ meal as a model substrate, we reported that liquid hot water (LHW) pretreatment enriched the lipid concentration by 2.2 to 4.2 fold. This study investigated combining oil recovery with ethanol production by extracting oil following LHW and simultaneous saccharification and co-fermentation (SSCF) of the biomass. Corn germ meal was again used to model the oil-bearing energy crops. Pretreated germ meal hydrolysate or solids (160 and 180 °C for 10 min) were fermented, and lipids were extracted from both the spent fermentation whole broth and fermentation solids, which were recovered by centrifugation and convective drying. Lipid contents in spent fermentation solids increased 3.7 to 5.7 fold compared to the beginning germ meal. The highest lipid yield achieved after fermentation was 36.0 mg lipid g−1 raw biomass; the maximum relative amount of triacylglycerol (TAG) was 50.9% of extracted oil. Although the fermentation step increased the lipid concentration of the recovered solids, it did not improve the lipid yields of pretreated biomass and detrimentally affected oil compositions by increasing the relative concentrations of free fatty acids.

Emerging trends in high-solids enzymatic saccharification of lignocellulosic feedstocks for developing an efficient and industrially deployable sugar platform

For the techno-commercial success of any lignocellulosic biorefinery, the cost-effective production of fermentable sugars for the manufacturing of bio-based products is indispensable. High-solids enzymatic saccharification (HSES) is a straightforward approach to develop an industrially deployable sugar platform. Economic incentives such as reduced capital and operational expenditure along with environmental benefits in the form of reduced effluent discharge makes this strategy more lucrative for exploitation. However, HSES suffers from the drawback of non-linear and disproportionate sugar yields with increased substrate loadings. To overcome this bottleneck, researchers tend to perform HSES at high enzyme loadings. Nonetheless, the production costs of cellulases are one of the key contributors that impair the entire process economics. This review highlights the relentless efforts made globally to attain a high-titer of sugars and their fermentation products by performing efficient HSES at low cellulase loadings. In this context, technical innovations such as advancements in new pretreatment strategies, next-generation cellulase cocktails, additives, accessory enzymes, novel reactor concepts and enzyme recycling studies are especially showcased. This review further covers new insights, learnings and prospects in the area of lignocellulosic bioprocessing.

Conversion of Lignocellulose for Bioethanol Production, Applied in Bio-Polyethylene Terephthalate

The increasing demand for petroleum-based polyethylene terephthalate (PET) grows population impacts daily. A greener and more sustainable raw material, lignocellulose, is a promising replacement of petroleum-based raw materials to convert into bio-PET. This paper reviews the recent development of lignocellulose conversion into bio-PET through bioethanol reaction pathways. This review addresses lignocellulose properties, bioethanol production processes, separation processes of bioethanol, and the production of bio-terephthalic acid and bio-polyethylene terephthalate. The article also discusses the current industries that manufacture alcohol-based raw materials for bio-PET or bio-PET products. In the future, the production of bio-PET from biomass will increase due to the scarcity of petroleum-based raw materials.

Emerging technologies for biofuel production: A critical review on recent progress, challenges and perspectives

Due to increasing anthropogenic activities, especially industry and transport, the fossil fuel demand and consumption have increased proportionally, causing serious environmental issues. This attracted researchers and scientists to develop new alternative energy sources. Therefore, this review covers the biofuel production potential and challenges related to various feedstocks and advances in process technologies. It has been concluded that the biofuels such as biodiesel, ethanol, bio-oil, syngas, Fischer-Tropsch H_2, and methane produced from crop plant residues, micro- and macroalgae and other biomass wastes using thermo-bio-chemical processes are an eco-friendly route for an energy source. Biofuels production and their uses in industries and transportation considerably minimize fossil fuel dependence. Literature analysis showed that biofuels generated from energy crops and microalgae could be the most efficient and attractive process. Recent progress in the field of biofuels using genetic engineering has larger perspectives in commercial-scale production. However, its large-scale production is still challenging; hence, to resolve this problem, it is essential to convert biomass in biofuels by developing novel technology to increase biofuel production to fulfil the current and future energy demand.

Bioethanol Production from Cellulose-Rich Corncob Residue by the Thermotolerant Saccharomyces cerevisiae TC-5

This study aimed to select thermotolerant yeast for bioethanol production from cellulose-rich corncob (CRC) residue. An effective yeast strain was identified as Saccharomyces cerevisiae TC-5. Bioethanol production from CRC residue via separate hydrolysis and fermentation (SHF), simultaneous saccharification and fermentation (SSF), and prehydrolysis-SSF (pre-SSF) using this strain were examined at 35-42 °C compared with the use of commercial S. cerevisiae. Temperatures up to 40 °C did not affect ethanol production by TC-5. The ethanol concentration obtained via the commercial S. cerevisiae decreased with increasing temperatures. The highest bioethanol concentrations obtained via SHF, SSF, and pre-SSF at 35-40 °C of strain TC-5 were not significantly different (20.13-21.64 g/L). The SSF process, with the highest ethanol productivity (0.291 g/L/h), was chosen to study the effect of solid loading at 40 °C. A CRC level of 12.5% (w/v) via fed-batch SSF resulted in the highest ethanol concentrations of 38.23 g/L. Thereafter, bioethanol production via fed-batch SSF with 12.5% (w/v) CRC was performed in 5-L bioreactor. The maximum ethanol concentration and ethanol productivity values were 31.96 g/L and 0.222 g/L/h, respectively. The thermotolerant S. cerevisiae TC-5 is promising yeast for bioethanol production under elevated temperatures via SSF and the use of second-generation substrates.

Sustainable environmental management and related biofuel technologies

Environmental sustainability criteria and rising energy demands, exhaustion of conventional resources of energy followed by environmental degradation due to abrupt climate changes have shifted the attention of scientists to seek renewable sources of green and clean energy for sustainable development. Bioenergy is an excellent alternative since it can be applied for several energy-requirements after utilizing suitable conversion methodology. This review elucidates all aspects of biofuels (bioethanol, biodiesel, and butanol) and their sustainability criteria. The principal focus is on the latest developments in biofuel production chiefly stressing on the role of nanotechnology. A plethora of investigations regarding the emerging techniques for process improvement like integration methods, less energy-intensive distillation techniques, and bioengineering of microorganisms are discussed. This can assist in making biofuel-production in a real-world market more economically and environmentally viable.

Production of bioethanol and xylitol from non-detoxified corn cob via a two-stage fermentation strategy

A novel two-stage fermentation strategy was applied to produce xylitol and ethanol from the whole acid-pretreated corn cob slurry. The acid-pretreated corn cob was used without filtration and detoxification by the two-stage fermentation with the robust Kluyveromyces marxianus CICC 1727-5. In the first stage, xylose in the slurry after dilute acid pretreatment of lignocellulosic biomass was used to produce xylitol under micro-aeration conditions. In the second stage, simultaneous saccharification fermentation was carried out, and the ethanol was produced from glucose releasing from the solid. Important parameters, such as aeration rate, cellulase loading during xylose utilization and SSF fermentation were studied for best performance. The two-stage fermentation strategy removed the inhibition of glucose on xylose, and little xylose was left in the fermentation broth. Under the optimized condition, the maximum ethanol and xylitol concentration were 52 g/L and 24.2 g/L corresponding to the yield of 0.41 g/g and 0.82 g/g, respectively.

Current state-of-the-art in ethanol production from lignocellulosic feedstocks

The renewable lignocellulosic biomass is a sustainable feedstock for the production of bioethanol, which shows the potential to replace fossil fuels. Due to the recalcitrant structure of plant cell wall made of cellulose, hemicellulose, and lignin, the biomass conversion process requires the use of efficient pretreatment process before enzymatic hydrolysis and fermentation to degrade the crystallinity of cellulose fibres and to remove lignin from biomass. Proper pretreatment techniques, economical production of cellulolytic enzymes, and effective fermentation of glucose and xylose in the presence of inhibitors are key challenges for the viable production of bioethanol. Although new strains capable of fermenting xylose are being designed, they are often not resistant to toxic compounds in hydrolysates. This paper provides an in-depth review of lignocellulosic bioethanol production via biochemical route, focusing on the most widely used pretreatment technologies and key operational conditions of enzymatic hydrolysis and fermentation considering sugar/ethanol yields. In addition, this review examines the relevant detoxification strategies for the removal of toxic substances and the importance of immobilization. The review also indicates potential usage of engineered microorganisms to improve glucose and xylose fermentation, cellulolytic enzymes production, and response to stress conditions.

Microbial Lipid Production from Corn Stover by the Oleaginous Yeast Rhodosporidium toruloides Using the PreSSLP Process

Dry acid pretreatment and biodetoxification (DryPB) has been considered as an advanced technology to treat lignocellulosic materials for improved downstream bioconversion. In this study, the lipid production from DryPB corn stover was investigated by the oleaginous yeast Rhodosporidium toruloides using a new process designated prehydrolysis followed by simultaneous saccharification and lipid production (PreSSLP). The results found that prehydrolysis at 50 °C and then lipid production at 30 °C improved lipid yield by more than 17.0% compared with those without a prehydrolysis step. The highest lipid yield of 0.080 g/g DryPB corn stover was achieved at a solid loading of 12.5%. The fatty acid distribution of lipid products was similar to those of conventional vegetable oils that are used for biodiesel production. Our results suggested that the integration of DryPB process and PreSSLP process can be explored as an improved technology for microbial lipid production from lignocellulosic materials.

Resistance mechanisms and reprogramming of microorganisms for efficient biorefinery under multiple environmental stresses

In the fermentation process of biorefinery, industrial strains are normally subjected to adverse environmental stresses, which leads to their slow growth, yield decline, a substantial increase in energy consumption, and other negative consequences, which ultimately seriously hamper the development of biorefinery. How to minimize the impact of stress on microorganisms is of great significance. This review not only reveals the damaging effects of different environmental stresses on microbial strains but also introduces commonly used strategies to improve microbial tolerance, including adaptive evolution, reprogramming of the industrial host based on genetic circuits, global transcription machinery engineering (gTME) and bioprocess integration. Furthermore, by integrating the advantages of these strategies and reducing the cost of system operation, the tolerance of industrial strains, combined with production efficiency and process stability, will be greatly improved, and the development prospects of biorefinery will be more widespread.

Effect of Various Pretreatment Methods on Bioethanol Production from Cotton Stalks

Cotton stalks (CS) are considered a good candidate for fuel-ethanol production due to its abundance and high carbohydrate content, but the direct conversion without pretreatment always results in extremely low yields due to the recalcitrant nature of lignocelluloses. The present study was undertaken to investigate the effect of various chemical and physicochemical pretreatment methods, i.e., alkali, microwave-assisted acid, organosolv, hydrothermal treatment, and sequentially organosolv and hydrothermal pretreatment, on chemical composition of CS and subsequent ethanol production applying pre-hydrolysis and simultaneous saccharification and fermentation (PSSF) at high solid loading. The best results in terms of ethanol production were achieved by the sequential combination of organosolv and hydrothermal pretreatment (32.3 g/L, using 15% w/v substrate concentration and 6 h pre-hydrolysis) with an improvement of 32% to 50% in ethanol production compared to the other pretreatments. Extending pre-hydrolysis time to 14 h and increasing substrate concentration to 20% w/v, ethanol production reached 47.0 g/L (corresponding to an ethanol yield of 52%) after 30 h of fermentation.

Novel Ethanol- and 5-Hydroxymethyl Furfural-Stimulated β-Glucosidase Retrieved From a Brazilian Secondary Atlantic Forest Soil Metagenome

Beta-glucosidases are key enzymes involved in lignocellulosic biomass degradation for bioethanol production, which complete the final step during cellulose hydrolysis by converting cellobiose into glucose. Currently, industry requires enzymes with improved catalytic performance or tolerance to process-specific parameters. In this sense, metagenomics has become a powerful tool for accessing and exploring the biochemical biodiversity present in different natural environments. Here, we report the identification of a novel β-glucosidase from metagenomic DNA isolated from soil samples enriched with decaying plant matter from a Secondary Atlantic Forest region. For this, we employed a functional screening approach using an optimized and synthetic broad host-range vector for library production. The novel β-glucosidase – named Lfa2 – displays three GH3-family conserved domains and conserved catalytic amino acids D283 and E487. The purified enzyme was most active in pH 5.5 and at 50°C, and showed hydrolytic activity toward several pNP synthetic substrates containing β-glucose, β-galactose, β-xylose, β-fucose, and α-arabinopyranose, as well as toward cellobiose. Lfa2 showed considerable glucose tolerance, exhibiting an IC₅₀ of 300 mM glucose and 30% of remaining activity in 600 mM glucose. In addition, Lfa2 retained full or slightly enhanced activity in the presence of several metal ions. Further, β-glucosidase activity was increased by 1.7-fold in the presence of 10% (v/v) ethanol, a concentration that can be reached in conventional fermentation processes. Similarly, Lfa2 showed 1.7-fold enhanced activity at high concentrations of 5-hydroxymethyl furfural, one of the most important cellulase inhibitors in pretreated sugarcane bagasse hydrolysates. Moreover, the synergistic effect of Lfa2 on Bacillus subtilis GH5-CBM3 endoglucanase activity was demonstrated by the increased production of glucose (1.6-fold). Together, these results indicate that β-glucosidase Lfa2 is a promissory enzyme candidate for utilization in diverse industrial applications, such as cellulosic biomass degradation or flavor enhancement in winemaking and grape processing.

A new approach to recycle oxalic acid during lignocellulose pretreatment for xylose production

BACKGROUND

Dilute oxalic acid pretreatment has drawn much attention because it could selectively hydrolyse the hemicellulose fraction during lignocellulose pretreatment. However, there are few studies focusing on the recovery of oxalic acid. Here, we reported a new approach to recycle oxalic acid used in pretreatment via ethanol extraction.

RESULTS

The highest xylose content in hydrolysate was 266.70 mg xylose per 1 g corncob (85.0% yield), which was achieved using 150 mmol/L oxalic acid under the optimized treatment condition (140 °C, 2.5 h). These pretreatment conditions were employed to the subsequent pretreatment using recycled oxalic acid. Oxalic acid in the hydrolysate could be recycled according to the following steps: (1) water was removed via evaporation and vacuum drying, (2) ethanol was used to extract oxalic acid in the remaining mixture, and (3) oxalic acid and ethanol were separated by reduced pressure evaporation. The total xylose yields could be stabilized by intermittent adding oxalic acid, and the yields were in range of 46.7-64.3% in this experiment.

CONCLUSIONS

This sustainable approach of recycling and reuse of oxalic acid has a significant potential application for replacing traditional dilute mineral acid pretreatment of lignocellulose, which could contribute to reduce CO₂ emissions and the cost of the pretreatment.