Improved response of human gingival fibroblasts to titanium coated with micro-/nano-structured tantalum

Effects and underlying mechanism of micro-nano-structured zirconia surfaces on biological behaviors of human gingival fibroblasts under inflammatory conditions

Zirconia is one of the most commonly used materials for abutments of dental implants, especially in the anterior region. Soft tissue integration to the zirconia abutment surface remains a challenge. Peri-implant soft tissue integration serves as a physiological barrier, attenuating pathogen penetration and preventing peri-implant disease. The surface microstructure of zirconia has significant effects on the biological behaviors of human gingival fibroblasts (HGFs), but the effects under inflammatory conditions are still unclear. In this study, we established two micro-nano structures on zirconia surfaces using a femtosecond laser, including microgrooves with widths of 30 μm (G3) and 60 μm (G6) and depths of 5 μm, and nanoparticles inside the microgrooves. Polished surfaces were used as controls. HGFs were seeded onto the three groups of zirconia specimens and stimulated with lipopolysaccharide. The HGFs on micro-nano-structured zirconia surfaces exhibited lower inflammatory responses and higher cell adhesion, proliferation, and migration under inflammatory conditions compared with the polished surfaces. Additionally, the G3 group exhibited lower inflammatory responses and higher cell adhesion and migration than the G6 group. The micro-nano-structured zirconia surface exhibited decreased neutrophil infiltration and increased M2-type macrophage polarization in vivo. To explore the molecular mechanism, RNA sequencing and gene silencing were utilized, which revealed two critical target genes regulated by the G3 group. Overall, we proposed an innovative micro-nano-structured zirconia surface that reduced the in vitro and in vivo inflammatory responses and promoted HGF adhesion, migration, and proliferation under inflammatory conditions, in which TRAFD1 and NLRC5 were the underlying key genes. STATEMENT OF SIGNIFICANCE: Zirconia is one of the most commonly used materials for abutments, especially in the anterior region. The surface microstructure of zirconia has significant effects on the biological behaviors of human gingival fibroblasts (HGFs), but few studies have investigated these effects under inflammatory conditions, and the mechanism remains unclear. In this study, we developed an innovative micro-nano-structured zirconia surface using a femtosecond laser, which reduces the in vitro and in vivo pro-inflammatory responses and promotes HGFs adhesion, migration, and proliferation under inflammatory conditions compared with the polished zirconia surface. The potential underlying mechanism was also investigated. This work has provided some theoretical basis for the micro-nano-structured zirconia surface in potentially reducing the inflammation and enhancing peri-implant soft-tissue integration under inflammatory conditions.

Evaluation of Adhesion and Viability of Human Gingival Fibroblasts on Strontium-Coated Titanium Surfaces: an in vitro Study

Background

Applying multifunctional coatings employing strontium (Sr) ions on titanium (Ti) surfaces is a useful and biocompatible method to improve osseointegration and prevent tissue infections through antimicrobial activity. Nonetheless, the effectiveness of Sr coating on the adhesion and viability of human gingival fibroblasts (HGFs) to Ti surfaces remains unclear.

Purpose

The study aimed to evaluate the effect of Sr coating on the adhesion and viability of HGFs to Ti surfaces.

Materials and Methods

The Ti wafers were divided into two groups based on Sr coating: uncoated Ti (control) and Sr-coated Ti. The Magnetron sputtering technique was used for Sr coating on Ti surfaces. The HGFs were seeded onto the surfaces and cultured for 48 and 96 hours before the cell adhesion and viability of the attached HGFs were assessed. The adhesion of HGFs was analyzed using the attached cell numbers at 48 h and 96 h, and the morphology at 24 h and 72 h. The cytotoxic effect on HGFs was assessed after 24 and 72 hours of incubation using cell viability assay. Student's t-test was used for statistical analysis.

Results

The number of cells attached to Sr-coated surfaces was significantly greater than those attached to uncoated Ti surfaces after 48 hours (P<0.0001) and 96 hours (P=0.0002). Sr-coated and uncoated Ti surfaces were not cytotoxic to HGFs, with the cell viability ranging from 92% to 105% of the untreated control HGFs. There were no significant differences in cell viability between Sr-coated and uncoated Ti surfaces at 24 hours (P=0.3675) and 72 hours (P=0.0982).

Conclusion

Sr-coated Ti surfaces induce adhesion of HGFs compared to uncoated Ti surfaces. Further, Sr-coated and uncoated Ti surfaces show no cytotoxic effect on the attached HGFs.

How Can Imbalance in Oral Microbiota and Immune Response Lead to Dental Implant Problems?

Dental implantology is one of the most dynamically developing fields of dentistry, which, despite developing clinical knowledge and new technologies, is still associated with many complications that may lead to the loss of the implant or the development of the disease, including peri-implantitis. One of the reasons for this condition may be the fact that dental implants cannot yield a proper osseointegration process due to the development of oral microbiota dysbiosis and the accompanying inflammation caused by immunological imbalance. This study aims to present current knowledge as to the impact of oral microflora dysbiosis and deregulation of the immune system on the course of failures observed in dental implantology. Evidence points to a strong correlation between these biological disturbances and implant complications, often stemming from improper osseointegration, pathogenic biofilms on implants, as well as an exacerbated inflammatory response. Technological enhancements in implant design may mitigate pathogen colonization and inflammation, underscoring implant success rates.

Surface characteristics and in vitro biocompatibility of surface-modified titanium foils as a regenerative barrier membrane for guided bone regeneration

This study evaluated surface characteristics and biocompatibility of surface-modified thin titanium (Ti) foils as a regenerative barrier membrane for future application in guided bone regeneration (GBR) surgery to augment atrophic alveolar bone. Anodic oxidation and post-heat treatment were performed to prepare various Ti foil samples. Then, the in vitro soft and hard tissue compatibility of the samples was evaluated by examining the cell responses using primary human gingival fibroblasts (HGFs) and MG63 human osteoblast-like cells. Investigated Ti foil samples showed marked differences in physicochemical surface properties. Additional 400°C heat treatment applied to the anodized Ti surface led to formation of an anatase titanium dioxide structure and well-organized nanoscale protrusions, and significantly increased surface wettability. Anodization and heat treatment enhanced the growth of HGFs and MG63 cells in Ti foil samples. Additional heat treatment for 10 and 30 min further significantly improved the response of HGFs including spreading and proliferation, and upregulated the mRNA expression of cell adhesion- and maturation-related genes as well as the osteoblast differentiation of MG63 cells. Ti foil sample with thin oxide coating obtained by a 30 min heat treatment exhibited poor clinical plasticity as a regenerative barrier membrane, which showed complete coating failure in the bending test. Our results indicate that anatase Ti oxide coating of a specific film thickness with nanoscale surface protrusion morphology and hydrophilic characteristics obtained by anodization and post-heat treatment would be an effective approach as a biocompatible Ti regenerative membrane for inducing better regeneration of both gingival tissue and bone.

A review: strategies to reduce infection in tantalum and its derivative applied to implants

Implant-associated infection is the main reasons for implant failure. Titanium and titanium alloy are currently the most widely used implant materials. However, they have limited antibacterial performance. Therefore, enhancing the antibacterial ability of implants by surface modification technology has become a trend of research. Tantalum is a potential implant coating material with good biological properties. With the development of surface modification technology, tantalum coating becomes more functional through improvement. In addition to improving osseointegration, its antibacterial performance has also become the focus of attention. In this review, we provide an overview of the latest strategies to improve tantalum antibacterial properties. We demonstrate the potential of the clinical application of tantalum in reducing implant infections by stressing its advantageous properties.

Tantalum and magnesium nanoparticles enhance the biomimetic properties and osteo-angiogenic effects of PCL membranes

Segmental bone defects, accompanied by periosteum stripping or injury, usually lead to delayed bone union or nonunion, which have challenged orthopedic surgeons. The periosteum, which provides essential blood supply and initial stem cells for bone tissue, plays an important role in the repair of bone defects. The reconstruction of the destroyed periosteum has attracted the attention of researchers exploring more satisfactory therapies to repair bone defects. However, periosteum-like biomaterials have yet to meet the clinical requirements and resolve this challenging problem. In this study, we manufactured a nanofiber periosteum replacement based on poly-ε-caprolactone (PCL), in which tantalum nanoparticles (TaNPs) and nanoscale magnesium oxide (MgO) were introduced to enhance its osteogenic and angiogenic ability. The results of in vitro experiments indicated that the PCL/Ta/MgO periosteum replacement, with excellent cytocompatibility, promoted the proliferation of both bone marrow mesenchymal stem cells (BMSCs) and endothelial progenitor cells (EPCs). Furthermore, the incorporation of TaNPs and nano-MgO synergistically enhanced the osteogenic differentiation of BMSCs and the angiogenic properties of EPCs. Similarly, the results of in vivo experiments from subcutaneous implantation and critical-sized calvarial defect models showed that the PCL/Ta/MgO periosteum replacement combined the osteogenesis and angiogenesis abilities, promoting vascularized bone formation to repair critical-sized calvarial defects. The results of our study suggest that the strategy of stimulating repairing bone defects can be achieved with the periosteum repaired in situ and that the proposed periosteum replacement can act as a bioactive medium to accelerate bone healing.

Advances in surface modification of tantalum and porous tantalum for rapid osseointegration: A thematic review

After bone defects reach a certain size, the body can no longer repair them. Tantalum, including its porous form, has attracted increasing attention due to good bioactivity, biocompatibility, and biomechanical properties. After a metal material is implanted into the body as a medical intervention, a series of interactions occurs between the material’s surface and the microenvironment. The interaction between cells and the surface of the implant mainly depends on the surface morphology and chemical composition of the implant’s surface. In this context, appropriate modification of the surface of tantalum can guide the biological behavior of cells, promote the potential of materials, and facilitate bone integration. Substantial progress has been made in tantalum surface modification technologies, especially nano-modification technology. This paper systematically reviews the progress in research on tantalum surface modification for the first time, including physicochemical properties, biological performance, and surface modification technologies of tantalum and porous tantalum.

Graphene Oxide Loaded on TiO2-Nanotube-Modified Ti Regulates the Behavior of Human Gingival Fibroblasts

Surface topography, protein adsorption, and the loading of coating materials can affect soft tissue sealing. Graphene oxide (GO) is a promising candidate for improving material surface functionalization to facilitate soft tissue integration between cells and biomaterials. In this study, TiO₂ nanotubes (TNTs) were prepared by the anodization of Ti, and TNT-graphene oxide composites (TNT-GO) were prepared by subsequent electroplating. The aim of this study was to investigate the effect of TNTs and TNT-GO surface modifications on the behavior of human gingival fibroblasts (HGFs). Commercially pure Ti and TNTs were used as the control group, and the TNT-GO surface was used as the experimental group. Scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction were used to perform sample characterization. Cell adhesion, cell proliferation, cell immunofluorescence staining, a wound-healing assay, real-time reverse-transcriptase polymerase chain reaction (RT-PCR), and Western blotting showed that the proliferation, adhesion, migration, and adhesion-related relative gene expression of HGFs on TNT-GO were significantly enhanced compared to the control groups, which may be mediated by the activation of integrin β1 and the MAPK-Erk1/2 pathway. Our findings suggest that the biological reactivity of HGFs can be enhanced by the TNT-GO surface, thereby improving the soft tissue sealing ability.

Mesenchymal stem cell-seeded porous tantalum-based biomaterial: A promising choice for promoting bone regeneration

Porous tantalum-based biomaterial is a novel tissue engineering material widely used in repairing bone defects due to its corrosion resistance, low elastic modulus, high friction coefficient, and excellent biocompatibility. Bone marrow-derived mesenchymal stem cells (BMSCs), a type of pluripotent stem cell, can travel from their original ecological niche to bone injury sites, where they differentiate into osteoblasts and osteocytes. Multiple factors regulate the proliferation, migration, and differentiation of BMSCs. In recent years, the regulatory effects of porous tantalum on BMSCs have been widely studied. Hence, in this study, we reviewed the characteristics of porous tantalum-based biomaterials and the mechanism of action of their regulatory effects on BMSCs. Further, we discuss the feasibility of seeding BMSCs in porous tantalum-based biomaterials for use in tissue repair.

Effect of addition of Ca2+ to titanium by a hydrothermal method on soft tissue sealing

The long-term stability of implants requires good peri-implant soft tissue sealing. Calcium ion (Ca²⁺ ) was loaded onto titanium surface by a hydrothermal method. In vitro, the morphology and composition of titanium surfaces were determined by scanning electron microscopy and energy-dispersive spectroscopy; proliferation of hGF-1 cells was measured by the CCK-8 assay; immunofluorescence staining was done to detect adherent proteins on titanium surface. In vivo, the degree of attachment between the implant and the surrounding soft tissue was measured by horseradish peroxidase (HRP). The percentage of hGF-1 cells adhering in the Ca group was significantly higher (p < .01); the fluorescence of integrin-β1 and F-actin in the Ca group was stronger; Ca group had the shorter length of HRP (p < .01). Ca²⁺ can be added to the surface of titanium by a hydrothermal method and it will be more beneficial for soft tissue early sealing.

Enhanced spreading, migration and osteodifferentiation of HBMSCs on macroporous CS-Ta - A biocompatible macroporous coating for hard tissue repair

Macroporous tantalum (Ta) coating was produced on titanium alloy implant for bone repair by cold spray (CS) technology, which is a promising technology for oxygen sensitive materials. The surface characteristics as well as in vitro cytocompatibility were systematically evaluated. The results showed that a rough and macroporous CS-Ta coating was formed on the Ti6Al4V (TC4) alloy surfaces. The surface roughness showed a significant enhancement from 17.06 μm (CS-Ta-S), 27.48 μm (CS-Ta-M) to 39.21 μm (CS-Ta-L) with the increase of the average pore diameter of CS-Ta coatings from 138.25 μm, 198.25 μm to 355.56 μm. In vitro results showed that macroporous CS-Ta structure with tantalum pentoxide (Ta₂O₅) was more favorable to induce human bone marrow derived mesenchymal stem cells (HBMSCs) spreading, migration and osteodifferentiation than TC4. Compared with the micro-scaled structure outside the macropores, the surface micro-nano structure inside the macropores was more favorable to promote osteodifferentiation with enhanced alkaline phosphatase (ALP) activity and extracellular matrix (ECM) mineralization. In particular, CS-Ta-L with the largest pore size showed significantly enhanced integrin-α5 expression, cell migration, ALP activity, ECM mineralization as well as osteogenic-related genes including ALP, osteopontin (OPN) and osteocalcin (OCN) expression. Our results indicated that macroporous Ta coatings by CS, especially CS-Ta-L, may be promising for hard tissue repairs.